Scribd
Upload
297 views4 pages

Design 4 Manufacturing

The document discusses design for manufacturability (DfM) principles for integrated circuit production from 90-22nm technology nodes. It explains how DfM is applied at both the product design level involving packaging and applications, as well as at the engineering level following DfM standards for 22nm process technologies. The book provides guidance for layout designers, packaging engineers, and quality engineers on setting up IC design flows, best practices, and links between design, manufacturing, and product definition for technologies down to the 22nm node, covering product families such as memories, logic, system-on-chip and system-in-package.

Uploaded by

Pk Jha
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
297 views4 pages

Design 4 Manufacturing

The document discusses design for manufacturability (DfM) principles for integrated circuit production from 90-22nm technology nodes. It explains how DfM is applied at both the product design level involving packaging and applications, as well as at the engineering level following DfM standards for 22nm process technologies. The book provides guidance for layout designers, packaging engineers, and quality engineers on setting up IC design flows, best practices, and links between design, manufacturing, and product definition for technologies down to the 22nm node, covering product families such as memories, logic, system-on-chip and system-in-package.

Uploaded by

Pk Jha
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Design for Manufacturability: From 1D to 4D for 90-22 nm Technology Nodes

http://avaxhome.ws/ebooks/engeneering_technology/1461417600Manufacturability.html

1 of 4

10/7/2013 8:55 PM

Design for Manufacturability: From 1D to 4D for 90-22 nm Technology Nodes

http://avaxhome.ws/ebooks/engeneering_technology/1461417600Manufacturability.html

2 of 4

10/7/2013 8:55 PM

Design for Manufacturability: From 1D to 4D for 90-22 nm Technology Nodes

http://avaxhome.ws/ebooks/engeneering_technology/1461417600Manufacturability.html

Design for Manufacturability: From 1D to 4D for 90-22 nm Technology Nodes


Posted By : nebulae | Date : 07 Oct 2013 07:53:05 | Comments : 0 | |

3 of 4

10/7/2013 8:55 PM

Design for Manufacturability: From 1D to 4D for 90-22 nm Technology Nodes

http://avaxhome.ws/ebooks/engeneering_technology/1461417600Manufacturability.html

Artur Balasinski, "Design for Manufacturability: From 1D to 4D for 90-22 nm Technology Nodes" English | ISBN: 1461417600 | 2014 | 280 pages | PDF | 9 MB This book explains integrated circuit design for manufacturability (DfM) at the product level (packaging, applications) and applies engineering DfM principles to the latest standards of product development at 22 nm technology nodes. It is a valuable guide for layout designers, packaging engineers and quality engineers, covering DfM development from 1D to 4D, involving IC design flow setup, best practices, links to manufacturing and product definition, for process technologies down to 22 nm node, and product families including memories, logic, system-on-chip and system-in-package.

Download Uploaded

4 of 4

10/7/2013 8:55 PM

You might also like