Scribd
Upload
82 views5 pages

Tabletop LED Lamp

The document describes how to make a simple tabletop LED lamp. It involves assembling cardboard rings and attaching an LED and switch. The LED and switch are wired up and attached to a battery pack. A tube is glued to the bottom to house the wires. When finished, pressing the switch will illuminate the LED to provide light. The lamp is intended to provide light and reduce stress or boredom at home or work.

Uploaded by

nfk
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
82 views5 pages

Tabletop LED Lamp

The document describes how to make a simple tabletop LED lamp. It involves assembling cardboard rings and attaching an LED and switch. The LED and switch are wired up and attached to a battery pack. A tube is glued to the bottom to house the wires. When finished, pressing the switch will illuminate the LED to provide light. The lamp is intended to provide light and reduce stress or boredom at home or work.

Uploaded by

nfk
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Food

Living

Outside

Play

Technology

Workshop

Tabletop LED Lamp


by RS Industries on July 22, 2013 Table of Contents Tabletop LED Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Intro: Tabletop LED Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Step 1: Make your LED lamb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Step 2: Tower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Step 3: Switch time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Step 4: Final Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Related Instructables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Advertisements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 2 3 3 4 5 5

http://www.instructables.com/id/Tabletop-LED-Lamp/

Intro: Tabletop LED Lamp


Ever feel bored or stressed out at the office or at home? Then build this simple electronic Tabletop LED Lamp. Just press the button and watch the lamp light up and turn off again. I am told that it is very effective, i personally have not tried it yet. Ultra bright LED - I got mine in bulk from India but they are available at RadioShack and online Battery Holders - I got them from allelectronics.com Base - Mine is a scrap stone base from family business but you can use anything you like Switch - Again in bulk from India but are avaliable at RadioShack and online Some type of clear rings - I used those rings used to hang scarfs Cardboard Duct tape (Any color) PVC Pipe or any type of tubing Wire Strippers Soldering Iron Felt (Optional) Pliers

Image Notes 1. I ended up changing the base

Image Notes 1. this is the LED i used but you can use any type. (Ultra bright fro best effect) 2. Just some of the materials you will need.

Step 1: Make your LED lamb


I don't really have a step-by-step for this because I made it a few months ago when I was bored. Basically you would super glue the rings together and then attach them to the cardboard covered with duct tape. Also make sure that you put the LED into one of the cardboard pieces so the leads are exposed (this will be the bottom). To add an artistic effect you can take thread and thread it though the corners of the lamp.

Image Notes 1. Bottom of the lamp 2. Optional thread to make it look better

http://www.instructables.com/id/Tabletop-LED-Lamp/

Step 2: Tower
Get a piece of PVC or any type of tubing and cut it to the desired length (I cut mine to roughly 1.5"). Once that is done spray paint it any color you like. then super glue it to the bottom of the lamp. Before that remember to attach the wires to the lamp and solder them in place (Believe me it'll save you sometime if you do that first).

Image Notes 1. solder the leads first then super glue the piping to that lamp 2. wire to the lamp from the swtch

Image Notes 1. battery pack 2. negative lead to switch 3. wire to switch

Step 3: Switch time


Now before you attach the switch, super glue the tower to the base. Then wire up the switch, connecting one end to the battery and the other to the LED lamp. Once it's all soldered super glue the switch to the base and tuck all excess wire into the tube with pliers (Be careful when doing this the lamp may come off if glue is not completely dry).

http://www.instructables.com/id/Tabletop-LED-Lamp/

Image Notes 1. super glued to the stone base

Image Notes 1. the all regulating switch

Image Notes 1. leads soldered to the switch 2. tuck excess wire into tube

Step 4: Final Product


Once you are done you can attach some felt to the bottom of you so your tabletop doesn't get scratched. Since the lamp was going to be on a granite table in our showroom, attaching felt helps prevent the two stone pieces from damaging each other. Then just press the button and light up the WORLD!!! (In the immediate area of course).

http://www.instructables.com/id/Tabletop-LED-Lamp/

Image Notes 1. I ended up changing the base

Image Notes 1. LET THERE BE LIGHT!

Related Instructables

LED Replacement of Baggage ligth under the seat of my scooter by AtomAnt


Advertisements

LED Night Lamp by hanlin_y

How to make led lamp to save dollars (video) by macobt

Repurpose a lamp with LEDs (Photos) by shaunsund

How to convert charger into night led lamp (video) by macobt

LED Desklamp Conversion by Hakimi

http://www.instructables.com/id/Tabletop-LED-Lamp/

You might also like