International Limited: Certificate of Visual Examination and Et
Uploaded by
Michael OkwuwaInternational Limited: Certificate of Visual Examination and Et
Uploaded by
Michael OkwuwaJC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: [email protected] Website: www.jcinternationalng.com
CERTIFICATE OF VISUAL EXAMINATION AND ET
STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998
Certificate No. 120113 Identification Number
Date of Examination
Examiner CHRISTOPHER DIESERU Description of Equipment TONG EXTENSION
Qualifications SNT LEVEL II MT, ET, LEEA II
10/07/2013
Qty
TC 1006 (200662-1)
Tong Extension
Date of next Examination: 09-01-2014
LOCATION : RIG FLOOR
SPECIFICATION: BS EN 1711 EXAMINATION AREA: CRITICAL AREAS
TEST METHOD: Phase Analysis testing (Vector Point Method)
EQUIPMENT MANUFACTURER GE Inspection Technologies (Phase 3S) EQUIPMENT MODEL NUMBER 401011 EQUIPMENT USED FREQUENCY SERIAL NUMBER
TEST PROCEDURE: JOP 700
PHASE ANGEL 48.5
0
8018UFR
100KHZ
CALIBRATION & REFERENCE BLOCK 0.5mm, 1.0mm & 2.0mm Artificial Notches (made by G.E.) S/N: 1075164/03
FREQUENCY 100KHZ
PHASE ANGEL 48.5
0
Name and address of equipment owner: TRANSOCEAN SUPPORT SERVICES
CALIBRATION DETAILS GAIN ( dB ) DISPLAY MODEL PROBE MODEL NUMBER Horizontal - 40.0 Weld Scan Probe Single Vertical 40.0 800PO4MB1P/1147351/04 Address of premises where Test / Examination was held: JACKRYAN
We hereby certify that on 10/07/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for Use Signature of Inspector: Conducting Examination Revision No: 01 Name of Inspector: CHRISTOPHER DIESERU Conducting: Examination only Doc No: JCI-C-ET-01
JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: [email protected] Website: www.jcinternationalng.com
CERTIFICATE OF VISUAL EXAMINATION AND ET
STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998
Certificate No. 120114 Identification Number
Date of Examination
Examiner CHRISTOPHER DIESERU Description of Equipment TONG EXTENSION
Qualifications SNT LEVEL II MT, ET, LEEA II
10/07/2013
Qty
TC 1008
Tong Extension
Date of next Examination: 09-01-2014
LOCATION : RIG FLOOR
SPECIFICATION: BS EN 1711 EXAMINATION AREA: CRITICAL AREAS
TEST METHOD: Phase Analysis testing (Vector Point Method)
EQUIPMENT MODEL NUMBER 401011 EQUIPMENT USED FREQUENCY SERIAL NUMBER
TEST PROCEDURE: JOP 700
PHASE ANGEL 48.5
0
EQUIPMENT MANUFACTURER GE Inspection Technologies (Phase 3S)
8018UFR
100KHZ
CALIBRATION & REFERENCE BLOCK 0.5mm, 1.0mm & 2.0mm Artificial Notches (made by G.E.) S/N: 1075164/03 PROBE MODEL NUMBER
FREQUENCY 100KHZ
PHASE ANGEL 48.5
0
CALIBRATION DETAILS GAIN ( dB ) DISPLAY MODEL
Name and address of equipment owner: TRANSOCEAN SUPPORT SERVICES
Horizontal - 40.0 Weld Scan Probe Single Vertical 40.0 800PO4MB1P/1147351/04 Address of premises where Test / Examination was held: JACKRYAN
We hereby certify that on 10/07/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for Use Signature of Inspector: Conducting Examination Revision No: 01 Name of Inspector: CHRISTOPHER DIESERU Conducting: Examination only Doc No: JCI-C-ET-01
