1. The document discusses head losses that occur in pipes when fluid flows, known as major and minor head losses. Major losses are due to friction along pipe walls, while minor losses occur at locations where the pipe changes diameter or direction, such as valves, elbows or couplings.
2. Major losses can be calculated using the Moody chart or Colebrook equation to determine the friction factor, while minor losses are represented by a loss coefficient.
3. For a pipe system, the total head loss is the sum of major and minor losses along the length of the pipe, including the lengths contributing to minor losses.
1. The document discusses head losses that occur in pipes when fluid flows, known as major and minor head losses. Major losses are due to friction along pipe walls, while minor losses occur at locations where the pipe changes diameter or direction, such as valves, elbows or couplings.
2. Major losses can be calculated using the Moody chart or Colebrook equation to determine the friction factor, while minor losses are represented by a loss coefficient.
3. For a pipe system, the total head loss is the sum of major and minor losses along the length of the pipe, including the lengths contributing to minor losses.
1. The document discusses head losses that occur in pipes when fluid flows, known as major and minor head losses. Major losses are due to friction along pipe walls, while minor losses occur at locations where the pipe changes diameter or direction, such as valves, elbows or couplings.
2. Major losses can be calculated using the Moody chart or Colebrook equation to determine the friction factor, while minor losses are represented by a loss coefficient.
3. For a pipe system, the total head loss is the sum of major and minor losses along the length of the pipe, including the lengths contributing to minor losses.
1. The document discusses head losses that occur in pipes when fluid flows, known as major and minor head losses. Major losses are due to friction along pipe walls, while minor losses occur at locations where the pipe changes diameter or direction, such as valves, elbows or couplings.
2. Major losses can be calculated using the Moody chart or Colebrook equation to determine the friction factor, while minor losses are represented by a loss coefficient.
3. For a pipe system, the total head loss is the sum of major and minor losses along the length of the pipe, including the lengths contributing to minor losses.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 2
Head Losses in Pipes
Prepared by Professor J . M. Cimbala, Penn State University
Latest revision: 11 J anuary 2012
Nomenclature
d inside diameter of a pipe or device f Darcy friction factor, as on the Moody chart or from the Colebrook equation g gravitational constant (9.81 m/s 2 ) h head, i.e. elevation of a fluid column h major major head loss (height of water column) due to friction in a pipe h minor minor head loss (height of water column) due to a device in the pipe system Ah L, total
total irreversible head loss, including major and minor losses: , total major minor L h h h A = +
K nondimensional minor loss coefficient L length of pipe section L e Entrance length required for fully developed flow in a pipe m mass flow rate through the pipe P static pressure Re d Reynolds number based on length scale d: Re d =Vd/v V mean velocity in a pipe V volume V
or Q volume flow rate pump W
work done to the control volume by a pump
turbine W
work done by the control volume on a turbine
viscous W
viscous work done on the control volume by a moving wall
o kinetic energy correction factor in energy equation for a control volume c average roughness height in a pipe v kinematic viscosity of the fluid (for water, v ~ 1.0 10 -6 m 2 /s) density of the fluid (for water, ~ 998 kg/m 3 at room temperature)
Educational Objectives
1. Learn how to measure the volume flow rate of water through a pipe. 2. Reinforce concepts of the Moody chart, and of major and minor head losses in pipes. 3. Measure the friction factor for pipes of various diameters and roughnesses. 4. Compare the experimental results to the published Moody chart (or Colebrook equation).
Equipment
1. pipe flow rig, consisting of a flow loop powered by a flow pump, a control valve, and various test specimens with static pressure taps 2. tape measure 3. micrometer 4. stopwatch 5. graduated cylinders of various volumes and sizes 6. Validyne pressure transducer with display unit and analog DC voltage output to measure the head difference along a length of pipe section 7. calibration stand with water manometer tubes to calibrate the pressure transducer 8. long sections of pipe, with static pressure taps: - nominal 1/2-inch and nominal 3/4-inch copper pipes - nominal 1/2-inch, nominal 1-inch, and nominal 1 1/2-inch PVC pipes (hydrodynamically smooth) - nominal 3/4-inch galvanized iron pipe 9. personal computer with digital data acquisition software 10. magnetic resonance flow meter (Rosemount reads volume flow rate in liters per minute)
Background
When water (or any other fluid) flows through a pipe, the pressure continuously drops in the streamwise direction because of friction along the walls of the pipe. It is common to express this pressure drop in terms of an irreversible head loss. Head is defined as the vertical height of a column of fluid connected to the flow by a static pressure tap. A fluid column that is at rest has a hydrostatic pressure difference from top to bottom of the column given by AP =g|Az| =gh, where h = |Az| is the difference in head or elevation of the column from top to bottom. In flow through piping systems, there are two types of irreversible head losses. Major losses, denoted by h major (sometimes h f ), are those due to frictional losses through sections of constant diameter pipe, in which the flow is fully developed. Major losses are expressed in reference books in terms of a nondimensional friction factor, f, defined as
major 2 2 h f L V d g = (1)
The Moody chart, or its corresponding equation, the Colebrook equation, is useful for obtaining friction factor as a function of Reynolds number and pipe roughness coefficient.
Minor losses, denoted by h minor , are those due to any other devices in the piping system other than constant-diameter pipe sections. These include entrances, valves, couplings which change the diameter of the pipe, elbows, etc. Minor losses are listed in reference books in terms of a nondimensional minor loss coefficient, K, defined as
minor 2 2 h K V g = (2)
In a system with both major and minor losses, it is important to recognize that a minor loss is defined as the additional loss due to the presence of the valve, elbow, etc. For example, the minor loss through an elbow does not include the frictional (Moody chart) loss through the length of the elbow. Thus, when measuring a minor loss coefficient, it is necessary to measure the length of the elbow, and to incorporate this length into the total length, L, of the pipe system.
For a piping system where the pipe diameter remains constant, Equations (1) and (2) can be combined as follows:
2 , total major minor 2 L V fL h h h K g d | | A = + = + | \ .
(3)
where , total L h A is the sum of all the major and minor losses. In keeping with the above convention, length L represents the total length of pipe, including the centerline length through each elbow or other minor loss device.
References
1. engel, Y. A. and Cimbala, J . M., Fluid Mechanics Fundamentals and Applications, McGraw-Hill, NY, 2006. 2. White, F. M., Fluid Mechanics, Ed. 5, McGraw-Hill, NY, 2003.
Hydraulic Tables; The Elements Of Gagings And The Friction Of Water Flowing In Pipes, Aqueducts, Sewers, Etc., As Determined By The Hazen And Williams Formula And The Flow Of Water Over The Sharp-Edged And Irregular Weirs, And The Quantity Discharged
