12-Piece T-Star Bit Socket Set, Extra Short, T8 - T60: Item # 5098

Download as pdf or txt
Download as pdf or txt
You are on page 1of 22

12-piece T-Star Bit Socket Set, extra short, T8 - T60

- 1/4": T8 - T10 - T15 - T20 - T25 - T27, length 30 mm - 3/8": T30 - T40 - T45 - T50 - T55, length 38 mm - 1/2": T60, length 48 mm - knurled - satin chrome finish - on metal rail
Item # 5098

10-piece Internal Hexagon Bit Sockets, 4 - 19 mm, extra short


- 1/4": 4 - 5 - 6 - 7 - 8 mm, length 30 mm - 3/8": 10 - 12 - 14 mm, length 38 mm - 1/2": 17 - 19 mm, length 48 mm - knurled - satin chrome finish - on metal rail
Item # 5099

10-piece Impact T-Star Sockets, T20 - T70


- for use with air tools - includes the following sizes: - T20 - T25 - T27 - T30 - T40 - T45 - T50 - T55 - T60 - T70 - 1/2" drive

Item # 5097

1/2" Impact Socket, 21 mm


- black phosphate finish - with groove and hole for retaining ball

Item # 5221

727

New Items September 2013

Pre-Chamber Socket for Mercedes CDI


- 1/2" Drive Multi-Spline Socket 1.5 x 58 mm - allows changing of the diesel pre-chamber - fits on MB engines from 1989. - suitable for engines with the following codes: 601, 602, 602.91, 603, 604, 605, 606, 661, 662 - material: chrome-vanadium steel - black phosphate finish
Item # 5430

10-piece Rim Lock Dismantling Tool Set


- allows professional removing of rim locks - "open" almost all rim locks without damaging the rim - conical dismantling sleeves for high power transmission - the kit includes: - dismantling sleeves: 30.9 - 30.0 - 31, 8 - 28, 9 - 28.0 - 27.0 26.0 - 28.8 mm, 60 mm long - 2 dismantling mandrels - made of S45C and SCM440 material

728

New Items September 2013

Item # 8656

Double Ring Spanner Set, 8 - 19 mm, extra long


- 8x10 - 11x13 - 14x15 - 16x17 - 18x19 - straight type - chrome-plated - in pouch

Item # 1187

1/2" Manual Impact Wrench


- Principle of operation: Rotate the impact wrench in loosening direction until it stops turning. Exert one or several blows with a hammer on the wrench head. The sudden angular momentum passes to the socket and screw - for loosening tightly fitted screw - suitable for right and left hand threads - base unit made of CR-V, satin chrome finish

Item # 708

5-piece Oil Filter Wrench Set


- for removing oil filter housing - special design for tight spaces - includes the following sizes: - 24 mm, suitable for BMW N62, models 5/7 - 27 mm, suitable for: BMW Mini - Renault 1.5 / 1.9 / 2.2 / 2.5 DCI Ford Fiesta 1.4 / 1.6 TDCi Mercedes A-Class Ford Transit 2.2 / 2.4 / 3.2> 2006 - 32 mm, suitable for: Ford Transit 2.0 / 2.4 2000-2006 Volkswagen Polo 1.2, Transporter T5 1.9> 2004 Audi A6 3.2 V6 TSI> 2004 - Vauxhall / Opel Astra G, Corsa B - 36 mm suitable for: M616 Mercedes vans, vans 116MB/100 Mercedes 220D, E220D, M604, C250D, E250D, M605, E300D, M606 BMW M52 (3/5 series), M60 (5/7/8 series), M73 (7/8 series) Vauxhall / Opel Vectra B di 16V> 98 Volkswagen Transporter T5, Lupo 1.2 TDi, Toureg TDi - 38 mm, suitable for Vauxhall / Opel Astra, Zafira 2.0 / 2.2 dti - to be used with ratchet - on metal rail
Item # 8677

Oil Service Wrench for Audi A4 & A6, BMW


- 19 mm hexagon x M16 spline (tamperproof) - length: 240 mm - chrome-molybdenum steel - satin chrome finish

Item # 8727

Ribbed Belt Tool Kit for Mini


- suitable for Mini Cooper S and One - for tensioning of air conditioning and alternator ribbed-belts - contains 2 release levers and 2 locking pins - to be used as OEM 118390 / 118410

Item # 8678

Ribbed Belt Mounting Lever


- for tensioning of the tensioning wheel - facilitates the placement of the V-ribbed belt - suitable for Mercedes-Benz Types: 168, 169 (A-Class), 245 (B-Class) - length: 620 mm - size: 15 mm
Item # 1703

729

New Items September 2013

Carburetor Screwdriver with Shaft


- facilitates the adjustment of carburetor kits, particularly suitable for work in tight spaces such as motorcycles - suitable for slotted screws - slot size: 1 x 5 mm - adjustable depth stop 0 - 5.5 mm - marked, lockable knurled sleeve for detecting the rotational range - length: 470 mm
Item # 4842

Silent Block Tool for Skoda Fabia, VW Polo


- for proper and quick installation of rubber bushings (silent blocks) on front axle brackets - suitable for Audi A2, VW Polo IV 9N (02-05), Skoda Fabia I, Seat Ibiza 6L (02-06) and Cordoba from 2002 - material: S45C steel
Item # 8254

730

New Items September 2013

Driveshaft Pulling Tool Set


- for assembly / retraction of drive shafts - universally usable by rich adaptation options - suitable for e.g. the following vehicles: VAG, Mercedes, BMW, Porsche, Peugeot, Renault, Opel / Vauxhall, etc. - includes the following tools: - flange nut - sleeve, OD 39 mm, ID 29 mm - sleeve, OD 46 mm, ID 36 mm - spindle M14x1.5 outer thread - spindle M16x1.5 inner thread - spindle M16x1.5 outer thread - spindle M18x1.5 inner thread - spindle M20x1.5 inner thread - spindle M22x1.5 inner thread - spindle M24x1.5 inner thread - spindle M27x1.5 inner thread - spindle M30x1.5 inner thread
Item # 8262

Battery Adapter, angled


- for disconnecting the battery when not used for a prolonged period - can also by used to prevent theft of a car - suitable for batteries with round terminals

Item # 1415

Battery Adapter, flat


- for disconnecting the battery when not used for a prolonged period - can also be used to prevent theft of a car - suitable for batteries with flat terminals

Item # 1416

Open Terminal Crimping Jaws for Art. 1410 / 1411


- suitable for non-insulated open terminals, sizes AWG 20-18 / 16-14 / 12-10 or 0.5-1.0 / 1.5-2.5 / 4.0-6.0 mm

Item # 1410-C

Retractable Air Hose Reel, 15 m


- suitable for mounting on wall, floor and ceiling - with hose stop, auto retracting - hose diameter: 3/8" - hose length: 50" - air inlet (F): 3/8" NPT - air outlet (M): 3/8" NPT - maximum pressure: 300PSI - maximum air flow: 25 CFM

Item # 8584

Air Eccentric Sander


- for sanding sufaces - with air hose and dust bag - sanding pad: 6" - free speed: 10000 rpm - air inlet: 1/4" - air suction hose: 3/8" - air consumption: 4.5 cfm - working pressure: 6.3 bar - length: 225 mm - weight: 1 kg
Item # 8688

731

New Items September 2013

Air Riveter
- for easy and quick riveting - suitable for rivet sizes 2.4 - 3.2 - 4.0 - 4.8 mm - pulling power: 720 Kg - air consumption: 0.86 l/min - stroke: 14 mm - air inlet: 1/4" - working pressure: 6.2 bar

Item # 3284

732

New Items September 2013

Air Sandblasting Cabinet, illuminated


- for sandblasting / cleaning of surfaces with e.g. dry glass beads or plastic granule abrasives - suitable for part size up to 66 x 53 x 49 cm - sealed cabinet with lid and viewing window, mounted gloves and cabinet air filters, to prevent the escape of abrasive material - saves blasting material, prevents workplace contamination - includes blasting gun, replaceable protective film for viewing window - working pressure: 6.2 bar
Item # 8717

40L Pneumatic Fuel Extracting Unit


- for extracting gasoline and diesel fuel - allows an easy renewing of tanks, fuel pumps, tank sensors or emptying wrongly refilled tanks - 3 suction tubes 6 - 8 - 10 mm, 2 m long - working pressure: 5 to 8 bar - air consumption: 170 l/min - air connection: 1/4"

Item # 8702

Hand Held Induction Heater


- Principle of operation: There is an alternating magnetic field. The metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as a electrical resistance and thus heats up. - allows heating of screws / nuts without severely heating surrounding components or even destroying them, as it is often the case when heated with a torch - within the shortest possible time, e.g. rusty nuts are heated and can be loosened - using for e.g. ball joint pinch bolts and other items on axle and engine - also for heating components such as bearings - includes the following induction coils inductive coil 19 mm, 185 mm long (for 15 - 19 mm) inductive coil 23 mm, 185 mm long (for 19-23 mm) formless coil, 800 mm, for heating of components (bearings, etc.)

Item # 2176

Oil Funnel Set


- helps to fill in engine oil spillage free - tubing and adapter are made of aluminum - 1l funnel capacity - includes the following adapters: - M37 x 3.0 for Lexus, Toyota (except Prius & Yaris) - M42 x 4.5 for Subaru (except Tribeca) - M32 x 3.5 for Nissan, Honda, Accura (except MDX & RDX) - M35 x 4.0 for most Mazda - bajonet adaptor for Audi, VW, BMW, Mercedes, Volvo, Dodge

Item # 8505

Oil Funnel, bent


- double angled for hard to reach places - height: 320 mm - funnel: 145 mm

Item # 8695

733

New Items September 2013

- power supply: ac 50 Hz to 250 V - current: 7 Amps - cable length: 230 cm - dimensions: 335 x 170 x 68 mm

Waste Oil Container, extra flat


- especially suitable where a low tank height is required - suitable for all fluids in the car such as cooling fluid, all kinds of oils, etc. - filtering sieve - drain and vent opening - max. capacity: 20 l - movable, with 2 wheels

Item # 8719

734

New Items September 2013

Pliers for Self-Locking Metal Bands


- for tightening of self-locking metal bands installed on e.g. axle boots - suitable for metal bands up to max. 10 x 0.4 mm

Item # 439

9-piece Oil Filter Cap Set


- includes the following oil filter cap wrenches: - 64.5 mm x 14-pt., aluminum chrome finish, for Toyota Auris, Corolla, Premio, Prius - 64.5 mm x 14-pt., aluminum chrome finish, for Toyota V6 Modelle von 2007-2008 Lexus ES 350, GS 350, GS 350h, LS 460, RX 350, LS 600j L - 88.8 mm x 15-pt, aluminum chrome finish, for Kia and Hyundai - 74.2 mm x 14-pt., aluminum chrome finish, for Audi, BMW, Ford, Mazda, Toyota, Volkswagen, Porsche, Mercedes V6 / V8 - 86.6 mm x 16-pt., aluminum chrome finish, for BMW 335i, 535i, 3 series E90, X6 3.0L, Volvo Modelle 1999-2006 (not 2005 40 and 50 models) - universal oil filter cap wrench 63 - 83 mm, SCM 440 chrome finish - 27 mm x 6-pt., S45C nickel, for Mercedes and Smart models - 32 mm x 6-pt., S45C nickel, for Opel 4-cyl. 2.2 L X10XE, X12XE, Y17DT, Y17DT and Mercedes OM 364, OM 366 - 36 mm x 6-pt, S45C nickel, for Mercedes Diesel OM604, OM605, OM606, BMW M52, M60, M70, Mini, VW VR6
Item # 8667

Fender Flaring Tool


- for expanding the fender size - is often required when lowering the vehicle and changing the wheel-tire combination - telescopic boom arm with 180 swiveling pressure roller - suitable for mounting on 4- and 5- bolt wheel hubs - fits on cars with pitch circle diameters from 95 to 120 mm - weight: 7500g

Item # 3525

Vacuum Dent Repair Kit with Slide Hammer (with Hand Pump)
- when using the pump the hammer creates a vacuum and causes the vacuum pad firmly holds on to the body - dents can now easily be removed by working the sliding hammer - independent of compressed air systems - 3 replaceable strainers: 70 mm, 100 mm, 125 mm

Item # 8703

Flaring Pliers, 310 mm


- for edge coiling of sharp fender inner edges, preventing damage to tires when cushioning - jaw protectors for smooth application - is required for e.g. lowered vehicles or when changing the wheel / tire combination - a dismantling of wheels can be omitted in most cases
Item # 8682

4-piece Plastic Chisel Set


- suitable for removing of e.g. panels, glued trim parts and wheel weights - flat and round head chisels, 127 and 175 mm length - handle end is designed to be used with a hammer

Item # 368

735

New Items September 2013

27-piece Trim Wedges and Scraper Set


- for removal of trim, paneling, etc. - allows a damage-free disassembly, even on painted surfaces - wide range of application through different scraper and removal tool profiles, such as: - scraper with trim guide - slotted lever, angled and straight - disassembly lever, angled and straight, in different widths
Item # 8611

3-piece Gap Gauges


- useful for body work such as fitting doors, fenders and other body parts - includes 3 gauges with 10 gauge blades each, 1 mm thickness

736

New Items September 2013

Item # 8763

Double Rubber Suction, 115 mm, aluminum


- is required for lifting and mounting of windshields - maximum capacity: 80 kgs - suction cup diameter: 115 mm - toggle lever suction device

Item # 7993

Triple Rubber Suction, 115 mm, aluminum


- is required for lifting and mounting of windshields - high load capacity of 95 kg - suction cup diameter: 115 mm - toggle lever suction device

Item # 7996

Testing Tool for Turbo Charger Systems


- for checking the charging system components when installed - professional and economic troubleshooting - safety valve prevents applying excessive pressure - suitable for turbochargers, G-chargers, compressors - fits on most charging system hoses - system is closed by plugs and pressurized - also suitable for leak detection

Item # 8563

Engine Timing Tool Kit for Fiat / Ford / Suzuki Diesel


- for checking and adjusting the engine timing - suitable for the following models: - Fiat Punto 1.3 JTD Multi-Jet 188A9.000 2003-2007 - Panda 1.3 JTD Multi-Jet 169A1.000 & 188A8.000 2003-2009 - Idea 1.3 JTD Multi-Jet 199A3.000 & 188A9.000 2004-2006 - Doblo 1.3 JTD Multi-Jet 188A9.000 2004-2006 - Doblo Cargo 1.3 JTD 188A9.000 2004-2006 - Opel (Vauxhall): Agila 1.3 CDTi Z13DT 2003-2008 - Corsa C 1.3 CDTi Z13DT 2003-2007 - Combo C 1.3 CDTi Z13DT 2003-2009 - Corsa D 1.3 CDTi Z13DTH & Z13DTJ 2006-2009 - Astra H 1.3 CDTi Z13DTH 2004-2009 - Tigra B 1.3 CDTi Z13DT 2004-2009 - Meriva 1.3 CDTi Z13DT & Z13DTJ 2004-2009 - Suzuki: Ignis 1.3 CDTi Z13DT 2003-2009 - Wagon 1.3 CDTi Z13DT 2003-2009 - Swift 1.3 CDTi Z13DT 2003-2010 - Ford KA 1.3 TDCi - includes the following tools: - counterholding tool for crankshaft pulley, to be used as Fiat Ford OEM 1871000200 OEM 303-1469 Opel / Vauxhall OEM KM-662-C - crankshaft adjustment tool, to be used as Opel (Vauxhall) OEM EN 46785 Opel (Vauxhall) OEM KM 955, Suzuki 09912-38300 - camshaft adjustment tool, to be used as Fiat OEM 1 871 000 900/1 860 985 000 Ford OEM 303-1472, Opel (Vauxhall) OEM EN 46781 Suzuki OEM 09917-68610 - chain tensioning lever, to be used as Fiat OEM 1870900400 - crankshaft locking tool, to be used as Fiat OEM 1870900300

Item # 8669

737

New Items September 2013

Engine Timing Tool Kit for BMW / Mini / Peugeot / Citroen


- for aligning the new and old version of balance shafts - prevents noncircular engine running by misaligned balance shafts - is required when renewing timing chain, crankshaft sealing ring, replacing the cylinder head gasket, etc. - includes: - locking tools for old and new version of balance shaft - crankshaft locking tool - locking pin for chain tensioner - suitable for the following engines: - BMW: 1.6 (N40 / N45 / N45T, B16, B16A, B16AC) 1.8 / 2.0 (N42 / N46 / N46T) 2.0 / 3.0 (N51 / N52 / N52K / N53 / N54) - PSA: 1.4 / 1.6 16V (EP3 / EP6 / EP6DT / EP6DTS) - Mini: 1.4 / 1.6 (N12 / N14) - to be used as OEM 115140, 119280, 119330

Item # 8710

738

New Items September 2013

Crankshaft Locking Tool for VAG 10 Cyl. Engines


- crankshaft locking tool with aligning pin - to be used as OEM T10195 - suitable for e.g. VW Tourag, Phaeton, etc.

Item # 8622

Timing Chain Mounting Tool for Mercedes M111


- allows troublefree mounting of timing chains on MB 111 4-cyl. petrol engines - suitable for following MB models: C-Class 180/200/220/230 E-Class 220/230 CLK 200/230 SLK 200/230 ML 230
Item # 8680

Valve Stem Seal Pliers, 270 mm


- for easy removing of deep valve stem seals on multi valve engines - to be used e.g. on Opel, VW and Ford - hardened jaws

Item # 8668

Testing Tool for Dual-Mass Flywheel


- suitable for testing of freeplay angle and the clearance on dual mass flywheel (DMF) - a checking of the flywheel is recommend because a worn or defective DMF can damage the new clutch - test can be performed directly on the vehicles if the clutch has been removed - includes: - 2 different claws for locking the flywheel - angular disc with holder - dial indicator with holder - assembly / measuring bolt - twist lever
Item # 8681

- ensures the correct removal of burned-in, corroded or broken-off glow plugs - allows repairing of the glow plug retaining thread without removing the cylinder head - defective original thread M10 x 1 is repaired by insertion of a new threaded sleeve - includes: - puller and sliding hammer for removing of stuck and broken glow plugs - reamers for reaming of the defective thread - tap M10 x 1 and M12 x 1 - centering sleeve for reamers and taps - special step drills and taps for removal of broken glow plugs - 12 thread repair sleeves M12 x 1 to M10 x 1 - compressed air adapter
Item # 8699

Injector Seat and Manhole Cleaning Set


- for cleaning of the injectors seats and glow plugs manholes - includes: 4 cleaning brushes, brush holder, 3 Injector seat cutters, cutter guide, seal puller, brush holder extension

Item # 8723

739

New Items September 2013

Glow Plug Removal Tool, M10x1.0

Shock Absorber Tool Kit


- for shock absorber nuts - suitable for nearly all vehicles, incl. Japanese gas shock absorbers - includes: - extention socket - rotating plate with 39 and 34 mm outer 6-pt. - rotating plate with 60 mm inner 6-pt. - 90 rotation plate, universal - 120 rotation plate for Japanese cars - 4 holding plates with 4-pt. head - 4 holding plates with round head - 4 screws M6 x 18 - 4 mm int. hex. wrench - 3 socket for grooved nuts with 22 mm 6-pt. drive in following sizes: - 10.5 mm inner diameter with 3.5 mm pin - 12.5 mm inner diameter with 3.5 mm pin - 14,5 mm inner diameter with 3.5 mm pin
Item # 8679

740

New Items September 2013

Front Wheel Bearing Puller for Ford Transit as of 2006


- for removal of the front wheel bearing unit and for removing the wheel hub - allows renewing of the camp without replacing the wheel hub - consisting of: - puller with retaining key - screw set (5 pcs.) - pressure plate (large) - pressure plate (small) - spindle with hex. drive

Item # 8707

Camber Adjusting Tool


- allows one-person adjusting - reduces the required time - pressure width 135 to 175 mm - 22 mm 6-edge spindle - 3 spindle lengths for a wide range of applications 75 mm for Seat Toledo - VW Jetta, Golf, etc. 85 mm for Seat Cordoba - VW Polo 95> 115 mm for Chrysler Voyager, etc.

Item # 8700

4-piece Subframe Positioning Bolt Set for VAG


- for precisely aligned mounting of the subframe - needed e.g. for replacing the rubber bushings and all jobs for which the auxiliary frame (subframe) is removed - suitable for: VW Crafter, T5, Touareg 2.5 L 5-cylinder TDI - to be used as OEM T10227

Item # 8715

Axle Tolerance Testing Tool New Items September 2013


- for locating of defectives on axles, such as defective ball joints, wheel bearings, etc. - suitable for fault diagnosis with loaded axle (as in normal operation) - testing is done by visual, acoustical and tactile sense verification - especially suitable when car is mounted on 4-post lift but also usable on the workshop floor - 1/2" drive for use with sliding bar - overall length: 355 mm - dimensions of the plastic coating: 60 x length 265 mm
Item # 8633

Hydraulic Flaring Tool


- suitable for - metric bubble flaring (5/32''), 6 mm, 8 mm, 10 mm - 45 degree double flaring 3/16'', 1/4'', 5/16'', 3/8'', 1/2'' - GM fuel line forming 5/16'', 3/8'' - push-connect forming 1/4'', 5/16'', 3/8'' - includes various sizes of dies and adapters for working on flaring tubes of GM fuel lines, brake lines, transmission lines and air condition lines - hydraulic pump for easy use

Item # 8704

8-piece Brake Bleeder Wrench Set


- for bleeding brake systems without removing the wheels - ratchet wrench makes loosening and tightening easy - hose remains on bleeding screw while loosening and tightening - 6 special sockets: - 9 x 29 mm - 9 x 75 mm - 10 x 29 mm - 10 x 75 mm - 11 x 29 mm - 11 x 75 mm - incl. bleeding hose with 4 mm inner diameter
Item # 66512

741

Brake Fluid Refill Bottle, 1l


- for refilling brake fluid while brake bledding - with valve and clamp - container size: 1 liter - also spare parts for BGS 8080

Item # 8731

Spark Plug Thread Repair Kit M8 x 1.0 New Items September 2013
- suitable for repair of spark plug threads - easy to use - contains special HSS taps with 6-pt.-drive and 4 threaded bushes, lengths 9.5 - 11.5 - 12.7 and 19 mm

Item # 167

Brake Disc Caliper


- for measuring the brake disc thickness, tire tread depth etc. - material: aluminum - dimensions: 182 x 115 x 13 mm

Item # 8689

Vernier Caliper Accessory Kit for Calipers


- for extending the measurement capabilities of calipers - allows measurements on: - deeper measurement points - inwardly tapered components - includes: - measuring leg, 2 pcs - measuring tip, long, 2 pcs - measuring tip, short, 2 pcs. - measuring heads, short, 2 pcs - perfect for use on brake discs - in wooden case
Item # 1930-1

742

Digital Thermometer with Stainless Steel Sensor Probe


- wide range of applications, suitable for e.g. air conditioning, food processing, heating and ventilating, agriculture, automobile, photography, food storage, refrigeration, laboratory, etc. - memory of the last measured value - low battery display - sensor fault display - auto power off after 15 min. - switch between C and F - temperature range: -50C to +300C (-58F ~ +572F) - temperature steps: 0.1 C - accuracy: (-20C - 80C) +1C - power: 1.5V battery - length of probe: 125 mm
Item # 8714

Flywheel Puller, M27x1.0


- left sided thread M27 x 1.0 - M16 spindle with sliding bar - inner diameter: 18 mm - length: 97 mm - material: S45C steel - suitable for e.g. following motorcycles: - Aprilia Area, Gulliver, Scarabeo, Sonic, SR 50, etc. - Benelli 491 - 50, K2 - 50, Naked 50, Pepe 50, etc. - Beta Ark 50, Eikon 50, Quadra 50 , Tempo 50 etc. - CPI Aragon 50, Crab 50, Formula 25, GTR 50, etc. - Italjet Dragster 50 - KTM Ark 50, Kross 50 - MBK CS 50, CW 50, EW 50, YH 50, YN 100, etc. - Yamaha CA 50, CS 50, CW 50, EW 50, YE 50, etc.
Item # 8726

3-in-1 Clutch / Variator Tool for Piaggio


- for blocking and removing the variator and clutch bell - integrated hex wrench for loosening the coupling nut (34 mm) - pin pitch: 55 mm - made of stainless steel - to be used as OEM 14569-PI - suitable for many models of following manufacturers: Aprilia, Derbi, Gilera, Italjet, Peugeot, Piaggio, Vespa
Item # 8729

Pipe Reamer
- for outside and inside deburring of metal pipes - suitable for pipe internal diameter of 3 to 12 mm and pipe outside diameter of 4 to 14 mm - inside cutter retractable, nickel-chromium-molybdenum alloy - outside cutter made of HSS steel
Item # 8732

743

New Items September 2013

3-piece File Set, 200 mm


- blade profile: flat hand - half round - round - plastic handle (blue) - cut 2

Item # 50210

3-piece Rasp Set, 200 mm


- blade profile: flat hand - half round - round - plastic handle (blue) - cut 2

744

New Items September 2013

Item # 50235

75-piece Copper Sealing Ring Assortment, metric for oil drain plugs
- consists of the following sealing ring sizes: - 5.0 x 10 x 1.0 mm - 6.0 x 10 x 1.0 mm 7.0 x 10 x 1.0 mm - 8.0 x 10 x 1.0 mm 10.5 x 17 x 1.5 mm - 11.0 x 17 x 1.5 mm 12.5 x 20 x 1.5 mm - 14.0 x 18 x 1.0 mm 14.0 x 20 x 1.5 mm - 15.0 x 20 x 2.0 mm 16.0 x 22 x 2.0 mm - 16.5 x 24 x 2.0 mm 17.5 x 24 x 2.0 mm - in a reusable universal box
Item # 8132

8-in-1 Special Wrench, 12-pt. 12 - 19 mm


- sizes: 8 -10 - 11 - 13 - 14 - 16 - 17 - 19 mm

Item # 7075

9-piece T-Handle Socket Wrench Set, 6 - 14 mm


- sizes: 6 - 7 - 8 - 9 - 10 -12 - 11 - 13 - 14 mm - 2-component handles

Item # 7881

16-piece Blind Hole Inner Puller Set


- for dismantling of bearings installed in a blind hole - is used when reparing e.g. car transmissions - includes the following tools: - slide hammer, length 290 mm - 2-feet puller with spindle - expansion sleeves for bearing with a inner diameter of 8 - 58 mm
Item # 7715

Trailer Socket, 13-pin


- screwed cable connector

Item # 80964

Trailer Plug, 13-pin


- screwed cable pins

Item # 80962

745

New Items September 2013

Trailer Reflector
- for mounting on trailers - 2 mounting holes - dimension: 13.5 x 13.5 cm - E-marked

746

New Items September 2013

Item # 80958

Trailer Lamps with Magnetic Holder


- for mounting on trailers - 10 x 10.5 cm left and right rear light unit - rear, brake, license plate light and turn signals - lighting unit connected with 2.2 m cable - 7.5 meter 5-core cable - incl. 7 pin connector - E-marked
Item # 80960

Trailer Taillight Bar, 137 cm


- for mounting on trailers - left and right rear light units 10 x 10.5 cm - rear, brake, license plate light and turn signals - triangle reflector 13.5 x 13.5 cm - 6 meter 5-core cable 5 x 0.5 sqmm - width: 137 cm - incl. 7 pin connector - E-marked
Item # 80956

14-piece Injector Extractor Kit


- incl. ball joint adaptor on hammer for use in confined areas - set includes deep open type sockets for dismantling injectors and adaptors - allows easy and quick removal of the injector - includes: - sliding hammer with shaft and handle - ball joint adaptors - adaptors (internal thread): M14 x M14 - M17 x M14 - M25 x M14 - M27 x M14 - adaptors (external thread): M27 x M14 - M20 x M14 - 6-pt socket for elecrical unit: 25 - 27 - 29 - 30 - 10 mm hexagon bit socket with 1/2" drive
Item # 67307

Injector Extractor Tool Kit


- for removal of diesel injectors - various adaptors make the kit suitable for most diesel injectors - includes also the following components: - 3 different slide hammers 1.6 kg, 160 mm length 2.7 kg, 460 mm length 5.1 kg, 600 mm length - 2 pulling claws with fork opening 13.7 x 18 mm, 105 mm length 12.7 x 19 mm, 130 mm length - 5 slotted 6-pt 1/2" sockets, 100 mm length sizes 25 - 27 - 28 - 29 - 30 mm - injector extractor, sleeve design, with shells outer diameter 35 mm internal diameter 29 mm M17 x 1.0 spindle - pulling adapter with external thread M27 x 1.0 (3pcs) and M25 x 1.0 - pulling adapter with internal thread M27 x 1.0 (3pcs) - sliding hammer adapter for inner, outer and claw extractor
Item # 8676

Vacuum Pump and Brake Bleeder


- for checking the components of the vacuum system e.g. MAP sensors, valves, hoses, etc. - also suitable for bleeding brakes and clutch systems - includes connecting hoses, bleeding bottle, hose connector / adapter - max. vacuum: -0.7 bar / -10 psi

Item # 8999

130-piece Thread Repair Kit, M5 - M12


- for repairing threaded holes - minimizes time and expenses - the set includes the following tools: - 5 drills for drilling out the broken thread - 5 taps - 5 insertion tools for mounting the spare inserts - 5 break off tools for removing of the installing pins - 110 thread inserts, sizes: 25 pcs. each: M5x0.8 - M6x1.0 - M8x1.25 - M10x1.5 10 pieces: M12x1.75

Item # 19500

747

New Items September 2013

16-piece Cutter Set


- for modeling and artwork, for precise cutting of vinyl, paper, cardboard, etc. - 3 cutter holders - 13 different blades with straight, angled and round cutting blades in different sizes

748

New Items September 2013

Item # 50613

8-piece Steel Wire Brush Set


- for removing rust, cleaning and reconditioning of surfaces - 3pc. 7 mm shank for e.g. electric drill - shaft length: 48 mm - 5 brushes: 25 - 40 - 50 - 60 - 75 mm - max. speed: 4500 rpm

Item # 50908

4-piece Steel Bracket Kit


- with holes - galvanized

Item # 80921 80923

Description 4-piece Steel Bracket Kit, 75x75x12 mm 4-piece Steel Bracket Kit, 100x100x15 mm

4-piece Steel Bracket Kit, 70x50x16 mm


- with holes - galvanized

Item # 80927

You might also like