Scribd Logo
Upload

Welcome to Scribd!

  • 48 views

    Design and Analyzing of Connecting Rod by Using Ansys

    Uploaded by

    Karthi Keyan
    1. The document discusses four different engineering projects involving the design and analysis of mechanical components using ANSYS software: 2. A connecting rod for an automobile engine to analyze stresses at different sections. 3. Optimization of cutting forces and chip reduction during turning operations using Taguchi methods. 4. Design and analysis of a telescopic shock absorber to find maximum deflections. 4. Design and analysis of a linear welding robot using Pro/E and ANSYS.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd

    Design and Analyzing of Connecting Rod by Using Ansys

    Uploaded by

    Karthi Keyan
    48 views4 pages
    1. The document discusses four different engineering projects involving the design and analysis of mechanical components using ANSYS software: 2. A connecting rod for an automobile engine to analyze stresses at different sections. 3. Optimization of cutting forces and chip reduction during turning operations using Taguchi methods. 4. Design and analysis of a telescopic shock absorber to find maximum deflections. 4. Design and analysis of a linear welding robot using Pro/E and ANSYS.

    Original Description:

    connecting rod analysis abstract

    Original Title

    Abstract

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document discusses four different engineering projects involving the design and analysis of mechanical components using ANSYS software: 2. A connecting rod for an automobile engine to analyze stresses at different sections. 3. Optimization of cutting forces and chip reduction during turning operations using Taguchi methods. 4. Design and analysis of a telescopic shock absorber to find maximum deflections. 4. Design and analysis of a linear welding robot using Pro/E and ANSYS.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    48 views4 pages

    Design and Analyzing of Connecting Rod by Using Ansys

    Uploaded by

    Karthi Keyan
    1. The document discusses four different engineering projects involving the design and analysis of mechanical components using ANSYS software: 2. A connecting rod for an automobile engine to analyze stresses at different sections. 3. Optimization of cutting forces and chip reduction during turning operations using Taguchi methods. 4. Design and analysis of a telescopic shock absorber to find maximum deflections. 4. Design and analysis of a linear welding robot using Pro/E and ANSYS.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

    1.

    DESIGN AND ANALYZING OF CONNECTING ROD BY USING ANSYS

    The automobile engine connecting rod is a high volume production critical component. Every vehicle that uses an internal combustion engine requires at least one connecting rod. From the viewpoint of functionality, connecting rods must have the highest possible rigidity at the lowest weight. The major stress induced in the connecting rod is a combination of axial and bending stresses in operation. The axial stresses are produced due to cylinder gas pressure (compressive only) and the inertia force arising in account of reciprocating action (both tensile as well as compressive), where as bending stresses are caused due to the centrifugal effects. The result of which is, the maximum stresses are developed at the fillet section of the big and the small end. Here the modeling will be designed by using Pro/E wildfire 5.0 then the modeling to be analyzed by using ANSYS 11.0 after analyzing which place maximum stresses are developed at the fillet section of the big and the small end to be verified.

    2.

    OPTIMIZATION

    OF

    SURFACE

    FINISH

    IN

    TURNING

    OPERATION USING TAUQCHI METHOD

    In this project the Cutting force and chip reduction coefficient is the important index of machinability as it determines the power consumption and amount of energy invested in machining actions. It is primarily influenced by process parameters like cutting speed, feed and depth of cut. This project application is Taguchis parameter design to optimize the parameters for individual responses. For multi-response optimization, Taguchis quality loss function approach is proposed. In the present investigation, optimal values of cutting speed, feed and depth of cut are determined to minimize cutting force and chip reduction coefficient during orthogonal turning. The effectiveness of the proposed methodology is illustrated through an experimental investigation in turning mild steel work piece using high speed steel tool.

    3. DESIGN AND ANALYSIS OF TELESCOPIC SHOCK ABSORBER BY USING ANSYS

    The telescopic shock absorber is widely used in the automotive suspension system, and the shock absorber which has the shock absorbing effect in both compression stroke and stretching stroke is the bi-directional action type shock absorber; in addition, some new shock absorbers including gas filling type shock absorbers and damping force adjusting shock absorbers are also used., The result of which is, the maximum stresses are developed at the top section or bottom of the eye section will be find out . Here the modeling will be designed by using Pro/E wildfire 5.0 then the modeling to be analyzed by using ANSYS 11.0 after analyzing which place maximum deflection are developed at the top of the eye end or bottom of the eye end to be analyzed.

    4. DESIGN AND ANALYSIS OF LINEAR WELDING ROBOT BY USING ANSYS Robot automation systems are rapidly taking the place of the human work force. One of the benefits is that this change provides the human work force with the time to spend on more creative tasks. The highest population of robots is in spot welding, spray painting, material handling, and arc welding. Spot welding and spray painting applications are mostly in the automotive industry. Due to continual increase in the need of high production rates, an accuracy and labour cost, automation has been adopted to the welding technology. First automation applications started with mechanized, automatic and semi-automated MIG-MAG systems as well as SAW. Robots have been used in many industrial applications including welding technology in order to increase efficiency, reduce overall costs, and increase productivity and product quality as well safe working conditions. Here the modeling of linear welding robot will be designed by using Pro/E wildfire 5.0 then the modeling to be analyzed by using ANSYS 11.0.

    You might also like