SuperTwo: Expandable, two door controller

CICP1300 The two-reader Super-Two supports 2 readers and has 8 inputs, 1 tamper alarm and 5 relay outputs. A locking steel enclosure, power supply and 7AH battery are included. Plug-in network interface, memory expansion, X-Y matrix keypad support and input/output expansion are optional. In addition to power for the controller and two readers, 1.2A at 12VDC is provided for accessories, including power strikes and mag-locks Super-Two is an expandable intelligent controller capable of supporting all access control functions for one or two doors. This distributed processor-based controller will operate as a standalone unit in the event communications with the server are interrupted. The Super-Two is programmed via CardAccess software, a Windows based access control, security management and video integration solution. Once programmed, the controller does not require continuous server communications, as it automatically stores systems transactions in its internal memory. The Super-Twos memory is field expandable, allowing for greater cardholder populations and/or a larger transaction buffer. The controllers Flash EPROM firmware is easily upgraded when additional features or system enhancements are required. All Continentals controllers feature extensive multi-stage lightning/ transient protection on-board for maximum reliability, even in harsh environments. The Super-Two accepts industry standard Weigand output devices and supports virtually all card/reader technologies. Proximity, Smart, Biometric, Magnetic Stripe, Barcode, Weigand and Keypad readers are easily connected and controlled. The Super-Two can store multiple (up to 10) card bit formats in its internal memory, making it a cost-effective retrofit panel. Supporting multiple bit formats allows existing card populations and readers to remain in place when upgrading to the Super-Two controller. To allow the Super-Two to be the most advanced and most flexible panel to date, Continental has integrated a network interface (optional) to allow the Super-Two to be directly connected to a localarea- network (LAN). Combine that with a total of 2.5M of memory (requires optional 2M board) and you have a 2-reader network panel capable of storing 210,000 cardholders.

Up to 63 controllers (MicroTerm, MiniTerm, SmarTerm, SuperTerm, Turbo SuperTerm or Super-Two) can be intermixed on the same communications port. Ports with only the Turbo Superterm and the Super-Two can communicate with the server at 57.6 Kbps. Multiple communication networks (ports) can be connected to the CardAccess server (or to multiple CardAccess communication servers) for maximum system expansion and faster communications between the controllers and the servers. Controller communication choices include: hardwire (repeat or multi-drop mode), LAN/WAN, dial-up or fiber optics for maximum flexibility. Continental Instruments supports RS232 and RS-422 communication formats for optimal system configuration. SuperTwo Capacities
20,000 cards standard (exp. to 125,000) 2 Five-wire, Wiegand output readers 2 Seven-wire X-Y Matrix type keypads 8 Supervised inputs 48 Additional inputs (Supervised) 5 Form C rated standard outputs at 3A@24VDC/VAC 48 Additional Form C rated outputs at 3A@24VDC/VAC 1000 Standard transaction buffer(exp. to 250,000) 256 Time schedules 1,000 Access groups 5 Sets of 100 holidays APL Listed for FIPS compliance Capable of processing 256 bit cards from card to controller to software NVR/DVR integration Sophisticated Alarm Integration Reader Power 800mA@5VDC, 500mA@12VDC Battery Backup 4-6 hours included Enclosure Size 21.5H x 21.25W x 7D, 48lbs. UL Listings Optional UL294, UL1076, CE

355 Bayview Ave., Amityville, NY 11701 Phone (631) 842-9400 Fax (631) 842-9135 www.cicaccess.com GSA GS-07F-00039H

Expansion boards
CICE1940PL-1 Polling Line Converter RS232 to RS422

RS422 Repeat Mode Communications Network

Up to 63 controllers on a Repeat Mode Network. In addition to memory expansion capabilities, the SuperCICP1300 RS422 RS422 RS422 Two will accept up to three input/output expansion boards. Max. 4000' Max. 4000' Max. 4000' Required if server is not located within 50 The input and output expansion boards are mounted in RS232 RS422 of the Super-Two a separate enclosure(s) Max. within 24 inches 50' x. 4000' enclosure. One Alarm/Relay Expander Board provides 16 supervised inputs and 16 relay outputs. CardAccess 3000
Sup perterm p Sup perterm p Sm marterm m C

Part No.
RS422 Max. 4000'

Description Two (2) reader processing panel (for use with CA3000 V 2.0.25 and above) 512K memory standard upgradable to 2.5M total memory capacity with up to a 125,000 card capacity, 8 EOL supervised alarm inputs, tamper, 5 Relay outputs. Support for on-board LAN adapter, 57.6Kps, 6 Access Groups per cardholder Unit shipped complete in a lockable steel enclosure including battery standby for memory and system operation UL294 and CUL Listed. Same as above-Circuit Board Only X-Y MATRIX INTERFACE BOARD Optional interface when using 7-wire X-Y matrix keypads with the Super-two (not required for keypad with wiegand output) 2MB MEMORY EXPANSION BOARD FOR SUPERTWO - up to 125,000 card capacity NETWORK INTERFACE BOARD FOR SUPERTWO - Optional plug-in adapter for communicating with the Super-Two over TCP/ IP(LAN/WAN). ALARM-RELAY EXPANDER BOARD- Optional board adds 16 supervised inputs and 16 relay outputs.

Mi initerm

Network interface To allow the Super-Two to be the most advanced and most flexible panel to date, Continental Instruments has integrated a Network Interface (optional) to allow the Super-Two to be directly connected to a local-area-network. RS422 Multi-drop Mode Communications Network CICP1300BD 4000' overall max. distance. Up to 63 controllers on a Multi-drop Mode Network. CICE1940PL-1 Combine that with a total of 2.5M of memory (requires Polling Line Converter CICP1300XYBD RS422 RS422 RS422 optional 2M board) and you have a network panel RS422 capable RS232 to RS422 Required if server is not located of storing 125,000 card-holders. within 50
Sup perterm p Sup perterm p

Database and Communications Server

In addition to the rechargable standby battery, each Supertwo includes a on-board lithium battery for up to one year of CardAccess 3000 Database and data protection.
Communications Server

RS232 Max. 50'

RS422

Sm marterm m Mi initerm C

CICP1300MB2 CICP1300 NETBD

Maximum distance between 1st and last controller is 4000'. A CICE1941 Line Driver is required after every ten (10) Controllers placed on a multi-drop network.

CICP1300ARBD*
RS422 to Panels

A or B

Door Lock Power Supply

Door Contact

Request to Exit Motion Detector Door Lock

Door Contact

Request to Exit

Request to Exit Bu

Typical Door Configuration See Continental Access Configuration Guide for additional detailed system wiring information.

G H
Electric Door Strike

Card Reader

NOTE: Request to Exit motion detectors will require an additional 12VDC power cable. Exit devices are typically mounted on the egress side of door.

CICP1300 Two Door intelligent Controller Continental Instruments Controllers can connect to the CardAccess Server via hardwire (shown below), LAN/WAN dial-up modem or fiber optics. See the Configuration Guide for additional detailed system information.
RS422 Repeat Mode Communications Network CICE1940PL-1 Polling Line Converter RS232 to RS422
4000' max. distance between controllers. Up to 63 controllers on a Repeat Mode Network. RS422 Max. 4000'
Sup perterm p Sm marterm m Mi initerm C

Required if server is not located within 50 RS232 Max. 50' RS422 x. 4000'

RS422 Max. 4000'

RS422 Max. 4000'

RS422 Max. 4000'

CardAccess 3000 Database and Communications Server

For more information, please contact your local sales representative or contact Continental Access directly at (631) 842-9135.

Continental Instruments, A Napco Security Group Company 355 Bayview Ave., Amityville, NY 11701 Required if server is not located 50 Phone (631)within 842-9400 Fax (631) 842-9135 www.cicaccess.com GSA GS-07F-00039H CardAccess and CI SQL 3000TM are trademarks of Continental/NAPCO, 2007 A494B
Sup perterm p Sup perterm p

CICE1940PL-1 Polling Line Converter RS232 to RS422

4000' overall max. distance. Up to 63 controllers on a Multi-drop Mode Network. RS422 RS422 RS422 RS422

RS422 Multi-drop Mode Communications Network

RS232 Max. 50'

RS422

Sm marterm m

Mi initerm C