Ajustes Chasis K15A
Ajustes Chasis K15A
Ajustes Chasis K15A
Enter Service Mode using the Volume +,- keys. Service Mode Menu: AGC VCO SBT SCT SCR STT GG BG XX XX XX XX XX XXX XXX XXX RC XXX GC XXX BC XX VA XX VS XX HS XX SS XX SVC : MUTE
Return to the Service mode by pressing MENU. AGC VCO SBT SCT SCR STT GG BG XX XX XX XX XX XXX XXX XXX XXX RC XXX GC XX BC VA XX VS XX HS XX SS XX SVC : MUTE
Select a mode to be adjusted, using the channel down key. Example: VCO. AGC VCO SBT SCT SCR STT GG BG XX XX XX XX XX XXX XXX XXX RC XXX GC XXX BC XX VA XX VS XX HS XX SS XX SVC : MUTE
Return to the Factory mode via the MENU key. ADJUSTMENT PATTERN OPTION RESET Press POWER to enter the Stand-by mode.
Samsung Electronics
4-1
ADJUSTMENT PATTERN OPTION RESET 1. The Pattern Adjustment is done only in the factory. Do not attempt to readjust it. 2. Refer to 4-2 for other adjustments. 3. Set OPTION data.
1 AGC RF AGC Adjustment 2 VCO PIF VCO Adjustment 3 SCT SUB-CONTRAST Adjustment 4 SCR SUB-COLOR Adjustment 5 STT SUB-TINT Adjustment 6 RC 7 GC RED-CUT OFF Adjustment GREEN-CUT OFF Adjustment BLUE-CUT OFF Adjustment
w key.
8 BC
9 SVC Input a Horiz line pattern 10 GG 11 BG GREEN-GAIN Adjustment BLUE-GAIN Adjustment 0~255 0~255 0~63 0~63 0 0~31 0~31 127 127 31 39 0 15 4
12 SBT SUB-BRIGHTNESS Adjustment 13 VA VERTICAL SIZE Adjustment VERTICAL CENTER Adjustment HORIZONTAL Phase Adjustment SUB-SHARPNESS Adjustment
14 VS 15 HS 16 SS
Note : The initial MICOM data values take effect when IC902 is replaced.
4-2
Samsung Electronics