Product data sheet

Characteristics

OTB1C0DM9LP

I/O distributed module OTB - CANopen bus 0..1000 m

Main
Range of product Product or component type Integrated connection type Bus type Modicon OTB I/O distributed module CANopen bus SUB-D 9, transmission mode: 2 twisted shielded pairsat 10 kbit/s...1 Mbit/s CANopen S20, profile: DS 401 V2.1, method of access: CSMA/MA multimaster with priority conforming to DR303-2 CANopen S20, profile: DS 401 V2.1, method of access: CSMA/MA multimaster with priority conforming to DS301 V4.02 12 conforming to EN/IEC 61131 type 1 5 mA for I0...I1 5 mA for I6...I7 7 mA for I2...I5 7 mA for I8...I11 2 solid state PNP for Q0...Q1 output logic: source 6 relay for Q2...Q7 2000 mA relay 300 mA solid state
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.

Discrete input number Discrete input logic Discrete input current

Sink or source

Discrete output number Discrete output current

Complementary
Topology Number of slave Bus length Devices linked by daisy-chaining or tap junctions 0...63 0...100 m tap-off length: 0...10 m, 500 kbit/s 0...1000 m tap-off length: 0...120 m, 50 kbit/s 0...250 m tap-off length: 0...10 m, 250 kbit/s 0...2500 m tap-off length: 0...300 m, 20 kbit/s 0...40 m tap-off length: 0...6 m, 800 kbit/s 0...500 m tap-off length: 0...10 m, 125 kbit/s 0...5000 m tap-off length: 0...600 m, 10 kbit/s 0...20 m, 1 Mbit/s 0...16, length of segment 0...205 m 0...32, length of segment 0...185 m 0...64, length of segment 0...160 m 24 V DC NPN or PNP 20.4...26.4 V 0.035 ms for I0...I1 at state 1 0.035 ms for I6...I7 at state 1 0.04 ms for I2...I5 at state 1 0.04 ms for I8...I11 at state 1 0.045 ms for I0...I1 at state 0 0.045 ms for I6...I7 at state 0 0.15 ms for I2...I5 at state 0 0.15 ms for I8...I11 at state 0 0 ms 12 ms 3 ms 3.4 kOhm for I2...I5 3.4 kOhm for I8...I11 5.7 kOhm for I0...I1 5.7 kOhm for I6...I7 24 V DC solid state 240 V AC relay 30 V DC relay

Number of devices per segment

Discrete input voltage Discrete input voltage type Discrete input type Input voltage limits Electronic filtering time

Configurable filtering time

Input impedance

Discrete output voltage

Sep 5, 2013

Output voltage limits Output current limits Current per output common Current consumption

20.4...28.8 V solid state 360 mA solid state 8 A relay <= 0.72 A solid state 30 mA at 5 V DC(at state 1)relay output 40 mA at 24 V DC(at state 1)relay output 5 mA at 5 V DC(at state 0)relay output 38...40 V 8 W for solid state 300 s at state 0 for relay 300 s at state 1 for relay 5 s at state 0 for solid state 5 s at state 1 for solid state >= 0.1 mA <= 1 ms for relay <= 0.1 mA at state 0 for solid state <= 1 V at state 1 1500 Vrms for 1 minute for relay output 500 Vrms for 1 minute for input circuit 500 Vrms for 1 minute for solid state output None <= 30 mOhm 500000 cycles AC-1 with 500 VA load for relay output 500000 cycles AC-14 with 250 VA load for relay output 500000 cycles AC-15 with 200 VA load for relay output 500000 cycles DC-1 with 60 W load for relay output 500000 cycles DC-13 with 30 W load for relay output DC 24 V 20.4...26.2 V <= 700 mA at 26.2 V for supply circuit <= 1 A for solid state output <= 50 A for supply circuit 19 W 0...7 132 with screw terminal discrete I/O module(s) 188 with spring terminal discrete I/O module(s) 244 with HE10 connector discrete I/O module(s) 7 x 8I or 7 x 2I or 7 x (4I/2O) with screw terminal analogue I/O module(s) >= 10 MOhm between I/O and earth terminals >= 10 MOhm between power supply and earth Removable screw terminal block 1 for input 1 for relay output(1 NO) 1 for relay output(2 NO) 1 for relay output(3 NO) 1 for solid state output 2 32 bits 20000 Hz 5000 Hz 2 7 kHz RPLS pulse generator output RPWM pulse width modulation CE By clips on 35 mm symmetrical DIN rail By screws on panel with fixing kit By screws on solid plate with fixing kit 1 LED per channel, green for I/O 1 LED, green for PWR 1 LED, green for RUN 1 LED, red for ERR 0.195 kg

Output overvoltage protection Tungsten load Response time

Switchable load Contact bounce time Leakage current Drop-out voltage Insulation between channels and internal logic

Insulation between channels Contact resistance Electrical durability

Supply circuit type [Us] rated supply voltage Supply voltage limits Input current Inrush current Power consumption Number of I/O expansion module I/O expansion capacity

Insulation resistance I/O connection Number of common point

Counting input number Counting capacity Counting frequency Pulse generator number Pulse generator frequency Pulse generator function Marking Fixing mode

Status LED

Product weight

Environment
IP degree of protection Immunity to microbreaks Dielectric strength Standards IP20 10 ms for supply circuit 500 V between I/O and earth terminals 500 V between power supply and earth CSA CSA C22.2 No. 213 (Class 1 Division 2 Groups A) CSA C22.2 No. 213 (Class 1 Division 2 Groups B) CSA C22.2 No. 213 (Class 1 Division 2 Groups C) CSA C22.2 No. 213 (Class 1 Division 2 Groups D) EN 61131-2 IEC 61131-2 UL 508 CULus 0...55 C -25...70 C 30...95 % without condensation 2 conforming to EN 60664 2 conforming to IEC 60664 0...2000 m 0...3000 m 0.075 mm (f = 10...57 Hz) on 35 mm symmetrical DIN rail 1 gn (f = 57...150 Hz) on 35 mm symmetrical DIN rail 15 gn for 11 ms conforming to EN 61131 15 gn for 11 ms conforming to IEC 61131 4 kV in contact conforming to IEC 61000-4-2 8 kV in air conforming to EN 61000-4-2 8 kV in air conforming to IEC 61000-4-2 4 kV in contact conforming to EN 61000-4-2 10 V/m, 80000000...2000000000 Hz conforming to EN 61000-4-3 10 V/m, 80000000...2000000000 Hz conforming to IEC 61000-4-3 1 kV for 24 V solid state I/O conforming to IEC 61000-4-4 2 kV for 24 V supply conforming to IEC 61000-4-4 Compliant 0908

Product certifications Ambient air temperature for operation Ambient air temperature for storage Relative humidity Pollution degree Operating altitude Storage altitude Vibration resistance Shock resistance Resistance to electrostatic discharge

Resistance to radiated fields Resistance to fast transients RoHS EUR status RoHS EUR conformity date

Product data sheet

OTB1C0DM9LP

Network Interface Module Dimensions

NOTE: * 8.5mm (0.33in) when the clamp is pulled out.

Product data sheet

OTB1C0DM9LP

Mounting an Island on a Panel or in a Cabinet Spacing Requirements

Panel Mounting Position of the Mounting Holes for the Network Interface Module

Product data sheet

Connections and Schema

OTB1C0DM9LP

24Vdc Power Supply Wiring Diagram

Fu

2A fast-blow fuse ABE7FU200

Network Interface Module Wiring Diagram

Output points 0 and 1 are source transistor outputs, all other output points are relay. The COM terminals are not connected together internally. Connect an appropriate fuse for the load.