Axial fans

Heavy-duty industrial centrifugal fans Compact industrial centrifugal fans Axial fans Plug fans Smoke extraction fans

Standard range covering up to 3600 Pa and 180 000 m/h, impeller diameter up to 1250 mm and continuous operating temperatures up to 120 C.
Our industrial axial fan product range is based on 3 standard product lines: For the field of low and medium pressure fans we define a bidirectional product line suitable for continuous operating temperatures up to 120 C. The medium pressure unidirectional fan line is suitable for continuous operating temperatures up to 80 C. The medium and high pressure fans are defined by the application oriented arrangement of our impellers with the choice of three possible blade profiles, the respective matching casing types and the use of fixed guide vanes out of a large choice of options. Every selection is based on the aerodynamical data arising from the required fan curve and from the design adaptation to the most different customer requests.

4000 3500 3000 2500 Total pressure increase 2000 1500 1000 500 0

50000

100000 . Volumenstrom Flow rate V (m3/h)

150000

200000

Field of operation (rho = 1,2 kg/m)

Standard types with fixed inlet or discharge guide vanes and their accessories.
Low and medium pressure axial fan, reversible DN 800 to DN 1000 Suitable for air circulation or ventilation with max. continuous temperatures of 85 C or 120 C respectively. Tubular casing made of aluminium sheet with spinned intake and discharge radius and equipped with a welded-on motor support bracket. Optimised corrosion protection by the use of high value aluminium.

Medium pressure axial fan, unidirectional DN 250 to DN 1250 Suitable for ventilation purposes with max. continuous operating temperatures of 40 C or 80 C respectively.

Tubular casing made of steel sheet with spinned intake and discharge flange and equipped with a welded-on or riveted motor support bracket. Optimised corrosion protection by powder coating RAL 7015.

Medium to high pressure axial fan, unidirectional, with or w/o discharge guide vanes DN 315 to DN 1250 Suitable for ventilation purposes with max. continuous operating temperatures of 40 C or 80 C respectively.

Tubular casing made of steel sheet with spinned intake and discharge flange and equipped with a welded-on motor support bracket and with discharge guide vanes made of steel sheet. Optimised corrosion protection by powder coating RAL 7015.

Protection screen

Flexible connection

Tube extension

Counter flange

Intake nozzle

Back draught damper

Terminal box

Service switch

Vibration dampers

Bracket

Impeller Design: One multipurpose hub for 3 blades profiles.

Dn Da Hub/tip diameter ratio: Dn/Da = 0,315

Impeller with hub and easy-to-fit blade mounting system. Profiled blades, adjustable at standstill, made of highly resistant cast aluminium alloy.

Dn

Da

Hub/tip diameter ratio: Dn/Da = 0,4

Impeller with hub and easy-to-fit blade mounting system. Profiled blades, adjustable at standstill, made of highly resistant cast aluminium alloy.

Dn

Da

Hub/tip diameter ratio: Dn/Da = 0,56

Impeller with hub and easy-to-fit blade mounting system. Profiled blades, adjustable at standstill, made of highly resistant cast aluminium alloy.

... and for DN 1250 to DN 2000 in addition: hollow profile blades, adjustable at standstill, made of steel sheet or stainless steel fitted to special impeller hub.

Examples for diverse, project related, product design solutions.

Swing-out version
Modular design tube casing made of steel sheet with spinned flanges at intake and discharge, welded or riveted motor bracket, and optimised corrosion protection by hot dip galvanising.

Medium pressure axial fan, swing-out design, direct driven, DN 315 to DN 1250, up to 80 C continuous operating temperature

Casing mount version

Tube casing made of steel sheet with spinned flanges at intake and discharge, welded on belt drive box and pedestal bearing block console, discharge guide vanes. Motor mounting bracket made of rugged steel sheet. Belt guard acc. to DIN EN 294 made of steel sheet. Optimised corrosion protection by hot dip galvanising or DD-paint.

Medium pressure axial fan, belt driven, as a casing mount version with or w/o guide vanes, DN 630 to DN 1250, up to 250 C operating temperature

Blower for car testing

Modular design tube casing with spinned flanges at intake and discharge and equipped with discharge guide vanes, all made of made of steel sheet. Optimised corrosion protection by hot dip galvanising or DD-paint. Direct drive, lubricated with high temperature grease and relubricated via grease tube connection from outside. Mounted on mobile lifting platform. Electrical or hydraulical level adjustment. Discharge air velocity controlled by damper system.

Medium pressure axial fan, direct driven, with control damper and fitted on mobile lifting platform (Electrical or hydraulical level adjustment as an option)

Our companys R&D department ensures our high quality standards in aero dynamics, aero acoustics and in high temperature material resistance.

We are continuously testing and improving our complete range of impeller geometries in the most diverse environments and for the most diverse requirements in our companys aerodynamical laboratory. Besides a general optimisation of the efficiencies and fluid dynamical features of the axial fans by using modern CFD simulation software and FEM calculation methods, the emphasis is thereby on the research of aerodynamically induced sound sources and in the avoiding of distinct frequency peaks.

FEM analyses of blade forces

Pressure side Suction side

sound power level

Flow rate

Acoustical curve of an axial fan

We optimise each inquiry with our own fan layout and selection software by taking into consideration any available specification parameter.

CFD analysis: Flow patterns of an axial fan showing pressure distribution around impeller and guide vanes.

Project related solutions up to 6000 Pa, 450 000 m/h, impeller diameter up to 2000 mm and operating temperatures up to 250 C.

Special materials: Aluminium, steel alloys, steel, stainless steel Surface protection: Powder coating, wet paint, hot dip galvanisation Benefits from assembly options: Divided casing, optimised maintenance because of direct access to motor and impeller

7000 6000 5000 4000 3000 2000 1000 0

Total pressure increase

100000

200000

300000 . Flow rate V (m3/h) Volumenstrom

400000

500000

Field of operation (rho=1,2 kg/m)

Examples for industrial ranges of appli

Saacke Marine South Korea

Axial Fans Impeller diameter 2000 mm Flow rate 360 000 m/h Pressure increase 2000 Pa Fan speed 1450 rpm Operating temperature 50 C Motor rating 355 kW

cation

Voith Paper China

Axial Fan Impeller diameter 1400 mm Flow rate 225 000 m/h Pressure increase 1800 Pa Fan speed 1450 rpm Operating temperature 80 C Motor rating 160 kW

Service days last 24 hours The modern quality management methods of our after sales and customer support centre ensure you quality standard, reliability and efficiency. Since fans belong to a great extend to the process determining factors of your business, we offer our service and assistance to you regardless of your fan supplier anywhere in the world within the shortest possible time if assistance is requested.

24h SERVICE for fan units worldwide.

Service-hotline: fon +49(0)2161- 968 184 fax +49(0)2161- 968 307 [email protected] Our service-team is available for you around-the-clock - Technical advice - Assembly - Commissioning - Performance tests - Noise and vibration measurements - Inspection - Preventative maintenance - Maintenance and repair - Electronic balancing - System optimisation

Headquarters:

[DE] Pollrich Ventilatoren GmbH Neusser Strae 172 D-41065 Mnchengladbach fon +49(0) 2161- 968 - 0 fax +49(0) 2161- 968 - 300 [email protected]

[DE] DLK Ventilatoren GmbH Ziegeleistrae 18 D-74214 Schntal-Berlichingen fon +49(0) 7943 - 9102 - 0 fax +49(0) 7943 - 9102 - 10 [email protected] [CN] Nantong Dart-pollrich fan CO.,Ltd 88 Tongsheng Road, Nantong Economic & Technology Development Zone, CN-Nantong, Jiangsu, China Post code: 226010 fon +86(0) 513-85554 411 fax +86(0) 513-85544 316 [email protected]

Your local support:

[FR] Pollrich France 17, Chemin des Boeufs, Za Les Bosquets FR-95540 Mery sur Oise fon +33(0) 130 360 920 fax +33(0) 130 360 966 [email protected] [NL] Tunnel Fans P.O. box 114, NL-3910 AC Rhenen Utrechtsestraatweg 206 NL-3911 TX Rhenen fon +31(0) 318 470 043 [email protected]

Further partners worldwide:

>see www.pollrichdlk.com