13 Power Quality / SIMEAS R

SIMEAS R Digital Fault Recorder with Power Quality (PQ) or Phasor Measurement Unit (PMU)
Function overview

Fig. 13/60 SIMEAS R

Description SIMEAS R as powerful disturbance (transient) recorder is available in two variations. On the one hand additionally with PQ-functionality (SIMEAS R V3.0) and on the other with PMU-functionality (SIMEAS R-PMU) according to IEEE C37.118. The following features are available: powerful disturbance (transient) recorder, power quality monitoring unit, power and frequency recording system, and event recorder. The disturbance recorder with a high sampling rate and excellent frequency response enables precise analysis of network disturbances. With the PMU vector quantities of voltages and currents with high accuracy in regard to amplitude, phase angle and time synchronization will be measured. It is possible to send in real time the phasors to a PDC and record them simultaneous with internal recorders. These records can be evaluated with OSCOP P. The power quality monitoring system for recording of voltage and current r.m.s. values, frequency, real and reactive power, power factor, current and voltage harmonics, voltage sages and swells, voltage flicker, etc. is a reliable tool to monitor and archive power quality related events. The power and frequency recording system is an important equipment in power plants to understand stability problems and analyze related topics like the response of generator excitation control systems. With an event recorder, various digital signals like the status of a breaker, isolator, and trip contacts of protection relays, etc. can be observed and recorded for further analysis. SIMEAS R as a field unit forms with OSCOP P software installed

on a DAKON PC (personal computer for data collection) a powerful disturbance recording system. One DAKON PC can communicate with several SIMEAS Rs using various communication channels. In the Automatic mode, the DAKON PC is able to collect all data recorded by SIMEAS Rs. With a flash memory for each SIMEAS R and practically unlimited storage capability on DAKON PCs and with a powerful database, the recording system enables excellent archiving possibilities. The data obtained by SIMEAS R is written to a high-capacity internal bulk storage medium. Under normal conditions in substations, power plants and industrial systems, this type of storage takes months to fill up. When storage is full, it functions as a ring buffer, overwriting the oldest values with the latest figures. With a high sampling rate this unit records all relevant information for further analysis of short-circuits, breaker opening and closing behavior, reaction of CTs and VTs on network disturbances, etc. With a recording capability of 32 analog and 64 binary channels of each unit and with real-time synchronization capability, the system can observe and monitor a huge number of feeders and power equipment. SIMEAS R is a recorder meeting all electromagnetic compatibility requirements like all Siemens numerical relays. High level of hardware and software quality and precise self diagnosis of each unit is a guarantee for the investment of our customers.

Disturbance recorder for applications in substations at MV/HV/EHV level and in power plants Power and frequency recorder for applications in power plants Power quality recorder for analysis and recording/archiving of power quality problems of all power applications Event recorder for binary signals for observation of the status of various primary components like breakers, isolators, etc. Transient recorder for DC signals Test recorder for commissioning and system test PMU according to IEEE C37.118 Measurement of vector quantities of voltages and currents with high accuracy in regard to amplitude, phase angle and time synchronization According to IEEE C37.118 internal recording of phasors via Transient and Continuous Phasor Recorder and parallel dispose the measured phasors to a Phasor Data Concentrator (PDC) Powerful recording system The field units SIMEAS R and the PC software OSCOP P form a powerful disturbance recording and power quality monitoring system. With a DAKON PC (Personal computer for data collection) in automatic mode, powerful data
collection and archiving capability leads to very short analysis times

LSP2413-afp.tif

Communication capability via Ethernet (LAN or WAN structure) in accordance with Ethernet 802.3 using TCP/IP protocol, communication via telephone network using ISDN or analog modem or direct communication using copper (RS232) or fiber-optic channels Various installation possibilities of the PC software OSCOP P in server, client and evaluation mode meet all requirements, like visualization, analysis for parameterization, commissioning, test, automatic data collection, data archiving Precise fault location capability using OSCOP P & diagnosis software Detailed power quality analysis information using SlCARO PQ software Powerful hardware Modular hardware system with up to 32 analog and 64 binary inputs in a 19-inch rack Flash memory
13/41

13

Siemens SIP 2008

13 Power Quality / SIMEAS R

Selection and ordering data

Description

Order No.

SIMEAS R V3.0 central unit ZE8/16 with integrated Ethernet port

With one slot for data acquisition unit (DAU); x 19" rack Housing For panel flush mounting (perforated housing) For surface mounting (perforated housing) For 19" assembly (perforated housing) Measurement at 16.7 Hz network 50 Hz network 60 Hz network Communication Port to a DAKON or evaluation PC Standard: Ethernet & COM1 Port Terminals Standard US design (not possible with surface mounting housing) Signal voltages of the CPU and the binary inputs 24 V DC 48 - 60 V DC 110 - 125 V DC 220 - 250 V DC 48 - 60 V DC, control input 1 24 V DC1) 110 - 125 V DC, control input 1 24 V DC1) 220 - 250 V DC, control input 1 24 V DC1) Data acquisition unit DAU VDAU ( 8 U / 16 binary inputs) CDAU (8 I / 16 binary inputs) VCDAU (4 U / 4 I / 16 binary inputs) BDAU (32 binary inputs) DDAU 20 mA DDAU 1 V DDAU 10 V Auxiliary power 24 to 60 V DC without battery 24 to 60 V DC with battery 50/60 Hz, 115/230 V AC or 110 V to 250 V DC without battery 50/60 Hz, 115/230 V AC or 110 V to 250 V DC with battery Manual German English French Spanish Italian Portuguese

7KE6000-0oooo oooo

D E F C D E 4 1 2 1 2 3 4 5 6 7 A B C D F G H G H J K 1 2 3 4 5 7

13

1) For connecting a synchronization unit 7KE6000-8HA.. the control input 1 of the CPU has to be dimensioned for 24 V DC.

13/42

Siemens SIP 2008

13 Power Quality / SIMEAS R

Selection and ordering data

Description

Order No.

SIMEAS R V3.0 central unit ZE32/64 with integrated Ethernet port

With four (4) slots for data acquisition units (DAUs); 19" rack Housing For panel flush mounting (perforated housing) For surface mounting (perforated housing)1) For 19" assembly (perforated housing) Measurement at 16.7 Hz network 50 Hz network 60 Hz network Communication Port to a DAKON or evaluation PC Standard: Ethernet & COM1 Port Terminals Standard US design (not possible with surface mounting housing)

7KE6000-1oooo oooo

D E F C D E 4 1 2 1 2 3 4 5 6 7

Signal voltages of the CPU and the binary inputs for units without free assembly of the DAUs 24 V DC 48 - 60 V DC 110 - 125 V DC 220 - 250 V DC 48 - 60 V DC, control input 1 24 V DC2) 110 - 125 V DC, control input 1 24 V DC2) 220 - 250 V DC, control input 1 24 V DC2) Data acquisition unit DAU Note: The fitting of the DAUs is from left to right VCDAU; 2 units ( 8 U / 8 I /32 binary inputs) VCDAU; 4 units (16 U / 16 I / 64 binary inputs) VCDAU; 1 unit (4 U / 4 I / 16 binary inputs) and CDAU; 3 units (24 I / 48 binary inputs) Data aquisition units (DAUs) for free assembly Note: You need to select the required DAU units according to the 7KE6000-4** instructions. By these instructions, the type of the data acquisition units and the binary inputs will be defined. Auxiliary power 24 to 60 V DC without battery 24 to 60 V DC with battery 50/60 Hz, 115/230 V AC or 110 V to 250 V DC without battery 50/60 Hz, 115/230 V AC or 110 V to 250 V DC with battery Manual German English French Spanish Italian Portuguese

A B C D

G H J K 1 2 3 4 5 7

13

1) The number of the possible measuring channels of surface mounting must be evaluated by the factory. 2) For connecting a synchronization unit 7KE6000-8HA.. the control input 1 of the CPU has to be dimensioned for 24 V DC.

13/44

Siemens SIP 2008