Scribd Logo
Upload

Welcome to Scribd!

  • 2K views

    Pa600 Factory Reset (English)

    Uploaded by

    Juan Francisco Zapata Espinosa
    The "Pa600_Factory_ Reset_v[nnn].pkg" file can be downloaded from our web site. Pa600 appears 'frozen', due to memory corruption or loading of incompatible data. To Save All User data, use the Media > Save All procedure.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Pa600 Factory Reset (English)

    Uploaded by

    Juan Francisco Zapata Espinosa
    2K views2 pages
    The "Pa600_Factory_ Reset_v[nnn].pkg" file can be downloaded from our web site. Pa600 appears 'frozen', due to memory corruption or loading of incompatible data. To Save All User data, use the Media > Save All procedure.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The "Pa600_Factory_ Reset_v[nnn].pkg" file can be downloaded from our web site. Pa600 appears 'frozen', due to memory corruption or loading of incompatible data. To Save All User data, use the Media > Save All procedure.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2K views2 pages

    Pa600 Factory Reset (English)

    Uploaded by

    Juan Francisco Zapata Espinosa
    The "Pa600_Factory_ Reset_v[nnn].pkg" file can be downloaded from our web site. Pa600 appears 'frozen', due to memory corruption or loading of incompatible data. To Save All User data, use the Media > Save All procedure.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Pa600 Factory Reset

    Introduction
    The procedure described in this document allows you to install the operating system and the original Factory data in the Pa600s internal memory, by loading the Pa600_Factory_ Reset_v[nnn].pkg file from an USB storage device. This operation is only due when Pa600 appears frozen, due to memory corruption or loading of incompatible data. The most up-to-date version of the Pa600_Factory_ Reset_v[nnn].pkg file can be downloaded from our web site (www.korg.com). Note: Loading this file may take several minutes. Please do not turn the instrument off before the loading operation has been completed! 4. A message will appear, asking you to select a PKG file. Connect the USB storage device where you copied the Reset file to the HOST USB port, then touch the OK button in the display to close the dialog box. 5. When a file selector appears, use the Device pop-up menu (in the lower left side of the display) to choose the device connected to the USB HOST port. Then touch the Pa600_Factory_Reset_v[nnn].pkg file to select it, and touch the Select button on the display to confirm loading.

    Making a safety copy of your data


    Warning: Loading this file will delete all data from the internal memory, so please make a safety copy of all data you want to preserve. To save all User data, use the Media > Save All procedure. In case there are custom Factory Styles and Pads in the internal memory, go to the Global > Mode Preferences > Media page and remove the protection to the Factory Styles and Pads you want to save; then use the Media > Save procedures to save single items or banks. In case there are custom Factory Sounds in the internal memory, backup all your data by using the Full Resource Backup command in the Media > Utility page. See the Media chapter in the Users Manual for more information.
    Device pop-up menu File selector

    6. A dialog box will appear, asking you to choose an operation or to cancel it. Touch the Format & Update button to confirm the Reset procedure. Warning: Confirming will delete all data from the internal memory. See above for instructions on how to make a safety copy of your data.

    Loading the Reset file


    Here is how to load the Reset file to your Pa600. 1. Unzip the Pa600_Factory_Reset_v[nnn].zip archive. Extract the Pa600_Factory_Reset_v[nnn].pkg system file and copy it to an USB storage device. 2. If it is on, keep the STANDBY button pressed for about one second to turn Pa600 off. Then keep the INTRO 1 button pressed, and press the STANDBY button to turn Pa600 on again. 3. Keep the INTRO 1 button pressed, until the Touch Panel Calibration page appears: this will confirm that the system loading procedure has been started. Execute the display calibration by touching the red cross wherever it appears.

    7. A progress bar appears, showing the loading status.

    8. When the loading procedure is finished, the System Update Completed message appears, inviting you to restart the instrument.

    9. Turn Pa600 off by keeping the STANDBY button pressed for about one second, then turn it on again by shortly pressing the STANDBY button. 10. If you have saved or backed up your data, reload them by using the Media > Load operations, or the Full Resource Restore command in the Media > Utility page. See the Media chapter in the Users Manual for more information. 2012 Korg Italy SpA

    You might also like