www.trifleet.nl - info@trifleet.

nl

Type:

: IMDG-IMO Type 1 for transport of PRODUCT CLASSES 3, 6.1, 8 and 9 : ISO 1496/3, US DOT-IM101, TIR Customs, RID/ADR, AR600, IMDG-IMO Type 1, CSC, TC, UIC

15.000 ltr - IMDG-IMO 1 - FRAME TANK CONTAINER

Approvals, certification and registration

General specifications:
Nominal Capacity (Tolerance +- 0.75%) Tare Mass (Tolerance +- 1.5%) Maximum Gross Mass: Dimensions to ISO : : : 15000Liters 3250Kg 36000Kg Length: 20' 0 " 3963Gallons 7165Lbs 79366Lbs 2438 mm Heigth: 8' 0" Heigth: 2438 mm 8' Width: MAWP Test pressure External Pressure Tank Design Temperature Tank Design Code : 4 bar : 6 bar : 0.41 bar : 120c (248F) : ASME VIII DIV.1

: Length:

6058 mm Width:

Top specifications:
Manlid Safety Relief Valve Air Inlet Top discharge : 500mm Stainless steel : 1 pcs 2" pressure (4.4 bar) relief valve : 1" Ball valve with 1" BSP connection, : 3" Provision only Walkways Spare connection Spill boxes : 2" Blind off connection : 2 Stainless steel boxes, with lockable spillbox covers : 1 Longitudinal, 3 transverse, 475mm wide, Marine grade aluminium

Tank vessel and frame specifications:

Tank vessel: Tank Barrel Material Steam Heating Insulation Cladding Calibration Frame: Frame type Handrail Provision Bottom Discharge : 316L Stainless steel : 8 Longitudinal stainless steel elements Effective area 8m, WP = 4 bar tested to 10 bar : Nominal thickness 45mm Tanklite / compressed mineral wool on barrel : Natural finish marine grade aluminium : Calibration chart fitted in spillbox Heating connections Thermometer

Rear specifications:
: 3" 30 Perolo foot and butterfly valve Terminating into a 3" BSP outlet with cap. Weld-in flange to be steam heated : Contact type analog from -20c to 200c : 3/4" BSP with caps Condensate drain fitted at lowest point

: Frame : Provision made for the fitment of collapsible handrails.

15.000 ltr IMDG IMO 1 FRAME TANK CONTAINER

15.000 ltr IMDG IMO 1 FRAME TANK CONTAINER

www.trifleet.nl - [email protected]

Type:

: IMDG-IMO Type 1 for transport of PRODUCT CLASSES 3, 6.1, 8 and 9 : ISO 1496/3, US DOT-IM101, TIR Customs, RID/ADR, AR600, IMDG-IMO Type 1, CSC, TC, UIC

17.500 ltr - IMDG-IMO 1 - FRAME TANK CONTAINER

Approvals, certification and registration

General specifications:
Nominal Capacity (Tolerance +- 0.75%) Tare Mass (Tolerance +- 3%) Maximum Gross Mass: Dimensions to ISO : : : 17500Liters 3380Kg 36000Kg Length: 20' 0 " 4623Gallons 7452Lbs 79366Lbs 2438 mm Heigth: 8' 0" Heigth: 2438 mm 8' 0" Width: MAWP Test pressure External Pressure Tank Design Temperature Tank Design Code : 4 bar : 6 bar : 0.41 bar : 120c (248F) : ASME VIII DIV.1

: Length:

6058 mm Width:

Top specifications:
Manlid Safety Relief Valve Air Inlet Top discharge : 500mm Stainless steel : 1 pcs 2" pressure (4.4 bar) relief valve : 1" Ball valve with 1" BSP connection, : 3" Provision only Walkways Spare connection Spill boxes : 2" Blind off connection : 2 Stainless steel boxes, with lockable spillbox covers : 1 Longitudinal, 3 transverse, 475mm wide, Marine grade aluminium

Tank vessel and frame specifications:

Tank vessel: Tank Barrel Material Steam Heating Insulation Cladding Calibration Frame: Frame type Handrail Provision Bottom Discharge : 316L Stainless steel : 8 Longitudinal stainless steel elements Effective area 8m, WP = 4 bar tested to 10 bar : Nominal thickness 45mm Tanklite / compressed mineral wool on barrel : Natural finish marine grade aluminium : Calibration chart fitted in spillbox Heating connections Thermometer

Rear specifications:
: 3" 30 Perolo foot and butterfly valve Terminating into a 3" BSP outlet with cap. Weld-in flange to be steam heated : Contact type analog from -20c to 200c : 3/4" BSP with caps Condensate drain fitted at lowest point

: Frame : Provision made for the fitment of collapsible handrails.

17.500 ltr IMDG IMO 1 FRAME TANK CONTAINER

17.500 ltr IMDG IMO 1 FRAME TANK CONTAINER

www.trifleet.nl - [email protected]

Type:

: IMDG T11 for transport of PRODUCT CLASSES 3, 5.1, 6.1, 8 and 9 : ISO 1496/3, US DOT-IM101, TIR Customs, RID/ADR, AR600, IMDG-IMO T11, CSC, TC, UIC

21.000 ltr - IMDG T11 (Optional T12/13/14) - BEAM TANK CONTAINER

Approvals, certification and registration

General specifications:
Nominal Capacity (Tolerance +- 0.75%) Tare Mass (Tolerance +- 3%) Maximum Gross Mass: Dimensions to ISO : : : 21000Liters 3370Kg 36000Kg Length: 20' 0 " 5548Gallons 7430Lbs 79366Lbs 2438 mm Heigth: 8' 0" Heigth: 2591 mm 8' 6" Width: MAWP Test pressure External Pressure Tank Design Temperature Tank Design Code : 4 bar : 6 bar : 0.41 bar : 120c (248F) : ASME VIII DIV.1

: Length:

6058 mm Width:

Top specifications:
Manlid Safety Relief Valve Air Inlet Top discharge : 500mm Stainless steel : 1 pcs 2" pressure (4.4 bar) relief valve : 1" Ball valve with 1" BSP connection, : 3" Provision only Walkways Spare connection Spill boxes : 2" Blind off connection : 2 Stainless steel boxes, with lockable spillbox covers : 1 Longitudinal, 3 transverse, 475mm wide, Marine grade aluminium

Tank vessel and frame specifications:

Tank vessel: Tank Barrel Material Steam Heating Insulation Cladding Calibration Frame: Frame type Handrail Provision Bottom Discharge : 316L Stainless steel : 8 Longitudinal stainless steel elements Effective area 8m, WP = 4 bar tested to 10 bar : Nominal thickness 50mm Tanklite / compressed mineral wool on barrel : Natural finish marine grade aluminium : Calibration chart fitted in spillbox Heating connections Thermometer

Rear specifications:
: 3" 30 Perolo foot and butterfly valve Terminating into a 3" BSP outlet with cap. Weld-in flange to be steam heated : Contact type analog from -20c to 200c : 3/4" BSP with caps Condensate drain fitted at lowest point

: Frame : Provision made for the fitment of collapsible handrails.

21.000 ltr IMDG T11 BEAM TANK CONTAINER

21.000 ltr IMDG T11 BEAM TANK CONTAINER

www.trifleet.nl - [email protected]

Type:

: T11/24/SH 8 for transport of PRODUCT CLASSES 3, 4, 5.1, 6.1, 8 and 9 : ISO 1496/3, CFR 49 - US DOT, IMDG ASME VIII Div 1, RID / ADR, AAR 600 TC, CSC, UIC, Customs Convention

24.000 ltr - IMDG T11 (Optional T12/13/14) - BEAM TANK CONTAINER

Approvals, certification and registration

General specifications:
Nominal Capacity (Tolerance +- 0.75%) Tare Mass (Tolerance +- 1.5%) Maximum Gross Mass: Dimensions to ISO : : : 24000Liters 3450Kg 36000Kg Length: 20' 0 " 6340Gallons 7605Lbs 79366Lbs 2438 mm Heigth 8' 0" Heigth 2591 mm 8' 6" Width: MAWP Test pressure External Pressure Tank Design Temperature Tank Design Code : 4 bar : 6 bar : 0.41 bar : -40c +130c (-40F - 266F) : ASME VIII DIV.1

: Length:

6058 mm Width:

Top specifications:
Manlid Safety Relief Valve Air Inlet Top discharge : 500mm Stainless steel : 1 pcs 2" pressure (4.4 bar) relief valve : 1" Ball valve with 1" BSP connection, Walkways : Providion only Spare connection Spill boxes : 2" Blind off connection : 2 Stainless steel boxes, with lockable spillbox covers : 1 Longitudinal, 2 transverse, 475mm wide, Marine grade aluminium

Tank vessel and frame specifications:

Tank vessel: Tank Barrel Material Steam Heating Insulation Cladding Calibration Frame: Frame type Handrail Provision Bottom Discharge : 316L Stainless steel : 8 Longitudinal stainless steel elements Effective area 7.5m, WP = 4 bar tested to 6 bar : Nominal thickness 45mm Polyurethane / compressed mineral wool on barrel : Natural finish marine grade aluminium : Calibration chart fitted in spillbox Heating connections Thermometer

Rear specifications:
: 3" 30 Perolo foot and butterfly valve Terminating into a 3" BSP outlet with cap. Weld-in flange to be steam heated : Wika contact type analog from -20c to 160c : 3/4" BSP with caps Condensate drain fitted at lowest point

: Beam : Provision made for the fitment of collapsible handrails.

24.000 ltr IMDG T11 BEAM TANK CONTAINER

24.000 ltr IMDG T11 BEAM TANK CONTAINER

www.trifleet.nl - [email protected]

Type:

: T11/24/SH 8 for transport of PRODUCT CLASSES 3, 4, 5.1, 6.1, 8 and 9 : ISO 1496/3, US DOT, UKDETR, IMDG ASME VIII Div 1, RID / ADR, AAR 600 TC, CSC, UIC, Customs Convention

25.000 ltr - IMDG T11 (Optional T12/13/14) - BEAM TANK CONTAINER

Approvals, certification and registration

General specifications:
Nominal Capacity (Tolerance +- 0.75%) Tare Mass (Tolerance +- 1.5%) Maximum Gross Mass: Dimensions to ISO : : : 25000Liters 3500Kg 36000Kg Length: 20' 0 " 6604Gallons 7716Lbs 79366Lbs 2438 mm Heigth 8' 0" Heigth 2591 mm 8' 6" Width: MAWP Test pressure External Pressure Tank Design Temperature Tank Design Code : 4 bar : 6 bar : 0.41 bar : -40c +130c (-40F - 266F) : ASME VIII DIV.1

: Length:

6058 mm Width:

Top specifications:
Manlid Safety Relief Valve Air Inlet Top discharge : 500mm Stainless steel : 1 pcs 2" pressure (4.4 bar) relief valve : 1" Ball valve with 1" BSP connection, Walkways : 3" Provision only Spare connection Spill boxes : 2" Blind off connection : 2 Stainless steel boxes, with lockable spillbox covers : 1 Longitudinal, 2 transverse, 475mm wide, Marine grade aluminium

Tank vessel and frame specifications:

Tank vessel: Tank Barrel Material Steam Heating Insulation Cladding Calibration Frame: Frame type Handrail Provision Bottom Discharge : 316L Stainless steel : 8 Longitudinal stainless steel elements Effective area 7.5m, WP = 4 bar tested to 6 bar : Nominal thickness 45mm Tanklite / compressed ceramic wool on barrel : Natural finish marine grade aluminium : Calibration chart fitted in spillbox Heating connections Thermometer

Rear specifications:
: 3" 30 Perolo foot and butterfly valve Terminating into a 3" BSP outlet with cap. Weld-in flange to be steam heated : Contact type analog from -20c to 160c : 3/4" BSP with caps Condensate drain fitted at lowest point

: Beam : Provision made for the fitment of collapsible handrails.

25.000 ltr IMDG T11 BEAM TANK CONTAINER

25.000 ltr IMDG T11 BEAM TANK CONTAINER

www.trifleet.nl - [email protected]

Type:

: T11/24/SH 8 for transport of PRODUCT CLASSES 3, 4, 5.1, 6.1, 8 and 9 : ISO 1496/3, US DOT, UKDETR, IMDG ASME VIII Div 1, RID / ADR, AAR 600 TC, CSC, UIC, Customs Convention

25.000 ltr - IMDG T11 (Optional T12/13/14) - BEAM TANK CONTAINER

Approvals, certification and registration

General specifications:
Nominal Capacity (Tolerance +- 0.75%) Tare Mass (Tolerance +- 1.5%) Maximum Gross Mass: Dimensions to ISO : : : 25000Liters 3500Kg 36000Kg Length: 20' 0 " 6604Gallons 7716Lbs 79366Lbs 2438 mm Heigth 8' 0" Heigth 2591 mm 8' 6" Width: MAWP Test pressure External Pressure Tank Design Temperature Tank Design Code : 4 bar : 6 bar : 0.41 bar : -40c +130c (-40F - 266F) : ASME VIII DIV.1

: Length:

6058 mm Width:

Top specifications:
Manlid Safety Relief Valve Air Inlet Top discharge : 500mm Stainless steel : 1 pcs 2" pressure (4.4 bar) relief valve : 1" Ball valve with 1" BSP connection, Walkways : 3" Provision only Spare connection Spill boxes : 2" Blind off connection : 2 Stainless steel boxes, with lockable spillbox covers : 1 Longitudinal, 2 transverse, 475mm wide, Marine grade aluminium

Tank vessel and frame specifications:

Tank vessel: Tank Barrel Material Steam Heating Insulation Cladding Calibration Frame: Frame type Handrail Provision Bottom Discharge : 316L Stainless steel : 8 Longitudinal stainless steel elements Effective area 7.5m, WP = 4 bar tested to 6 bar : Nominal thickness 45mm Tanklite / compressed ceramic wool on barrel : Natural finish marine grade aluminium : Calibration chart fitted in spillbox Heating connections Thermometer

Rear specifications:
: 3" 30 Perolo foot and butterfly valve Terminating into a 3" BSP outlet with cap. Weld-in flange to be steam heated : Contact type analog from -20c to 160c : 3/4" BSP with caps Condensate drain fitted at lowest point

: Beam : Provision made for the fitment of collapsible handrails.

26.000 ltr IMDG T11 BEAM TANK CONTAINER

26.000 ltr IMDG T11 BEAM TANK CONTAINER

www.trifleet.nl - [email protected]

Type:

: IMDG-IMO Type 1 for transport of PRODUCT CLASSES 3, 6.1, 8 and 9 : ISO 1496/3, US DOT-IM101, IMDG -IMO Type 1 ASME VIII Div 1, RID / ADR, AAR 600 TC, CSC, UIC, Customs Convention

27.000 ltr - IMDG-IMO 1 - SWAP BODY TANK CONTAINER

Approvals, certification and registration

General specifications:
Nominal Capacity (Tolerance +- 0.75%) Tare Mass (Tolerance +- 1.5%) Maximum Gross Mass: Dimensions to ISO : : : 27000Liters 4400Kg 34000Kg Length: 20' 0 " 7133Gallons 9700Lbs 74956Lbs 2550 mm Heigth 8' 4" Heigth 2743 mm 9' 0" Width: MAWP Test pressure External Pressure Tank Design Temperature Tank Design Code : 4 bar : 6 bar : 0.4 bar : 100c (212F) : ASME VIII DIV.1

: Length:

6058 mm Width:

Top specifications:
Manlid Safety Relief Valve Air Inlet Top discharge : 500mm Stainless steel : 1 pcs 2" pressure (4.4 bar) relief valve : 1" Ball valve with 1" BSP connection, Walkways : 3" Provision only Spare connection Spill boxes : : 2 Stainless steel boxes, with lockable spillbox covers : 1 Longitudinal, 3 transverse, 475mm wide, Marine grade aluminium

Tank vessel and frame specifications:

Tank vessel: Tank Barrel Material Steam Heating Insulation Cladding Calibration Frame: Frame type Handrail Provision Bottom Discharge : 316L Stainless steel : 8 Longitudinal stainless steel elements Effective area 8m, WP = 4.0 bar tested to 10.0 bar : Nominal thickness 50 mm Polyurethane / compressed mineral wool on barrel : Natural finish marine grade aluminium : Calibration chart fitted in spillbox Heating connections Thermometer

Rear specifications:
: 3" 30 Perolo foot and butterfly valve Terminating into a 3" BSP outlet with cap. Weld-in flange to be steam heated : Contact type analog from -20c to 200c : 3/4" BSP with caps Condensate drain fitted at lowest point

: Swap body : Provision made for the fitment of collapsible handrails.

27.000 ltr IMDGIMO1 SWAP BODY TANK CONTAINER

www.trifleet.nl - [email protected]

Type:

: IMDG-IMO Type 1 for transport of PRODUCT CLASSES 3, 6.1, 8 and 9 : ISO 1496/3, IMDG -IMO 1 ASME VIII Div 1, RID / ADR, CSC, UIC, TIR Customs Convention

30.000 ltr - IMDG-IMO 1 - SWAP BODY TANK CONTAINER

Approvals, certification and registration

General specifications:
Nominal Capacity (Tolerance +- 0.75%) Tare Mass (Tolerance +- 1.5%) Maximum Gross Mass: Dimensions to ISO : : : 30000Liters 4160Kg 34000Kg Length: 23' 5 " 7925Gallons 9171Lbs 74956Lbs 2550 mm Heigth 8' 4" Heigth 2670 mm 8' 9" Width: MAWP Test pressure External Pressure Tank Design Temperature Tank Design Code : 3 bar : 4.5 bar : 0.4 bar : -20 to 120c (68 to 248F) : ASME VIII DIV.1

: Length:

7150 mm Width:

Top specifications:
Manlid Cleaning port Safety Relief Valve Air Inlet Top discharge : 500 mm Stainless steel : 3 pcs 300 mm Stainless steel : 1 pcs 3" pressure (4.4 bar) relief valve : 1" Ball valve with 1" BSP connection, : 3" Provision only Walkways Spare connection Spill boxes : : 4 Stainless steel boxes, with lockable spillbox covers : 1 Longitudinal, 3 transverse, 400 mm wide, Marine grade aluminium

Tank vessel and frame specifications:

Tank vessel: Tank Barrel Material Steam Heating Insulation Cladding Calibration Frame: Frame type Handrail Provision Bottom Discharge : 316L Stainless steel 4 Fixed baffles fitted : 8 Longitudinal stainless steel elements Effective area 10.5m, WP = 3.0 bar tested to 4.5 bar : Nominal thickness 50 mm Tanklite / compressed mineral wool on barrel : White GRP over barel and ends : Calibration chart fitted in spillbox : Swap body : Provision made for the fitment of collapsible handrails. Heating connections Thermometer

Rear specifications:
: 3" 30 Perolo foot and butterfly valve Terminating into a 3" BSP outlet with cap. Weld-in flange to be steam heated : Contact type analog from -20c to 200c : 3/4" BSP with caps Condensate drain fitted at lowest point

30.000 ltr IMDGIMO1 SWAP BODY TANK CONTAINER

www.trifleet.nl - [email protected]

Type:

: IMDG T4 for transport of PRODUCT CLASSES 3, 5.1, 6.1, 8 and 9 : ISO 1496/3, IMDG T4 ASME VIII Div 1, RID / ADR, UK-DETR CSC, UIC, TIR Customs Convention

35.000ltr - IMDG-IMO 1 - SWAP BODY TANK CONTAINER

Approvals, certification and registration

General specifications:
Nominal Capacity (Tolerance +- 0.75%) Tare Mass (Tolerance +- 1.5%) Maximum Gross Mass: Dimensions to ISO : : : 35000Liters 4100Kg 36000Kg Length: 25' 8 " 9246Gallons 9038Lbs 79366Lbs 2550 mm Heigth 8' 4" Heigth 2670 mm 8' 9" Width: MAWP Test pressure External Pressure Tank Design Temperature Tank Design Code : 2.67 bar : 4 bar : 0.21 bar : -40 to 130C (-40 to 266F) : ASME VIII DIV.1

: Length:

7820 mm Width:

Top specifications:
Manlid Cleaning port Safety Relief Valve Air Inlet Top discharge : 500mm Stainless steel : 4 pcs 300mm Stainless steel : 2 pcs 2" pressure (3.33/-0.21 bar) relief valve : 2" Ball valve with 2" BSP connection, : 3" Provision only Walkways Spare connection Spill boxes : 1 1/2" Blind off connection : 5 Stainless steel boxes, with lockable spillbox covers : 1 Longitudinal, 5 transverse, 475mm wide, Marine grade aluminium

Tank vessel and frame specifications:

Tank vessel: Tank Barrel Material Steam Heating Insulation Cladding Calibration Frame: Frame type Handrail Provision Bottom Discharge : 316L Stainless steel, 4 fixed baffles fitted : 8 Longitudinal stainless steel elements Effective area 10m, WP = 3.0 bar tested to 4.5 bar : Nominal thickness 50 mm Compressed mineral wool on barrel : White finish marine grade aluminium GRP domes on ends : Calibration chart fitted in spillbox : Swap body : Collapsible handrail is fitted Heating connections Thermometer

Rear specifications:
: 3" 30 Perolo foot and butterfly valve Terminating into a 3" BSP outlet with cap. Weld-in flange to be steam heated : Contact type analog from -20c to 200c : 3/4" BSP with caps Condensate drain fitted at lowest point

35.000 ltr IMDG IMO 1 SWAP BODY TANK CONTAINER

35.000 ltr IMDGIMO 1 SWAP BODY TANK CONTAINER