Intro Physics 1

Introductory Physics I
Elementary Mechanics
by
Robert G. Brown
Duke University Physics Department
Durham, NC 27708-0305
[email protected]
Copyright Notice
Copyright Robert G. Brown 1993, 2007, 2013
Notice
This physics textbook is designed to support my personal teaching activities at Duke University,
in particular teaching its Physics 141/142, 151/152, or 161/162 series (Introductory Physics for life
science majors, engineers, or potential physics majors, respectively). It is freely available in its
entirety in a downloadable PDF form or to be read online at:
http://www.phy.duke.edu/rgb/Class/intro physics 1.php
It is also available in an inexpensive (really!) print version via Lulu press here:
http://www.lulu.com/shop/product-21186588.html
where readers/users can voluntarily help support or reward the author by purchasing either this
paper copy or one of the even more inexpensive electronic copies.
By making the book available in these various media at a cost ranging from free to cheap, I
enable the text can be used by students all over the world where each student can pay (or not)
according to their means.
Nevertheless, I am hoping that students who truly nd this work useful will purchase a copy
through Lulu or a bookseller (when the latter option becomes available), if only to help subsidize
me while I continue to write inexpensive textbooks in physics or other subjects.
This textbook is organized for ease of presentation and ease of learning. In particular, they are
hierarchically organized in a way that directly supports ecient learning. They are also remarkably
complete in their presentation and contain moderately detailed derivations of many of the important
equations and relations from rst principles while not skimping on simpler heuristic or conceptual
explanations as well.
As a live document (one I actively use and frequently change, adding or deleting material
or altering the presentation in some way), this textbook may have errors great and small, stub
sections where I intend to add content at some later time but havent yet nished it, and they cover
and omit topics according to my own view of what is or isnt important to cover in a one-semester
course. Expect them to change with little warning or announcement as I add content or correct
errors.
Purchasers of the paper version should be aware of its probable imperfection and be prepared to
either live with it or mark up their copy with corrections or additions as need be. The latest (and
hopefully most complete and correct) version is always available for free online anyway, and people
who have paid for a paper copy are especially welcome to access and retrieve it.
I cherish good-hearted communication from students or other instructors pointing out errors or
suggesting new content (and have in the past done my best to implement many such corrections or
suggestions).
Books by Robert G. Brown
Physics Textbooks
Introductory Physics I and II
A lecture note style textbook series intended to support the teaching of introductory physics,
with calculus, at a level suitable for Duke undergraduates.
Classical Electrodynamics
A lecture note style textbook intended to support the second semester (primarily the dynamical
portion, little statics covered) of a two semester course of graduate Classical Electrodynamics.
Computing Books
How to Engineer a Beowulf Cluster
An online classic for years, this is the print version of the famous free online book on cluster
engineering. It too is being actively rewritten and developed, no guarantees, but it is probably
still useful in its current incarnation.
Fiction
The Book of Lilith
ISBN: 978-1-4303-2245-0
Web: http://www.phy.duke.edu/rgb/Lilith/Lilith.php
Lilith is the rst person to be given a soul by God, and is given the job of giving all the things
in the world souls by loving them, beginning with Adam. Adam is given the job of making
up rules and the denitions of sin so that humans may one day live in an ethical society.
Unfortunately Adam is weak, jealous, and greedy, and insists on being on top during sex to
be closer to God.
Lilith, however, refuses to be second to Adam or anyone else. The Book of Lilith is a funny,
sad, satirical, uplifting tale of her spiritual journey through the ancient world soulgiving and
judging to nd at the end of that journey herself.
Poetry
Who Shall Sing, When Man is Gone
Original poetry, including the epic-length poem about an imagined end of the world brought
about by a nuclear war that gives the collection its name. Includes many long and short works
on love and life, pain and death.
Ocean roaring, whipped by storm
in damned deance, hating hell
with every wave and every swell,
every shark and every shell
and shoreline.
Hot Tea!
More original poetry with a distinctly Zen cast to it. Works range from funny and satirical to
inspiring and uplifting, with a few erotic poems thrown in.
Chop water, carry
wood. Ice all around,
re is dying. Winter Zen?
All of these books can be found on the online Lulu store here:
http://stores.lulu.com/store.php?fAcctID=877977
The Book of Lilith is available on Amazon, Barnes and Noble and other online bookseller websites.
Contents
Preface xi
Textbook Layout and Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
I: Getting Ready to Learn Physics 3
Preliminaries 3
See, Do, Teach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Other Conditions for Learning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Your Brain and Learning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
How to Do Your Homework Eectively . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
The Method of Three Passes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Mathematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Homework for Week 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
II: Elementary Mechanics 31
Week 1: Newtons Laws 33
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
1.1: Introduction: A Bit of History and Philosophy . . . . . . . . . . . . . . . . . . . . . . 38
1.2: Dynamics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
1.3: Coordinates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
1.4: Newtons Laws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
1.5: Forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
1.5.1: The Forces of Nature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
1.5.2: Force Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
1.6: Force Balance Static Equilibrium . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Example 1.6.1: Spring and Mass in Static Force Equilibrium . . . . . . . . . . . . . 51
1.7: Simple Motion in One Dimension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
i
ii CONTENTS
Example 1.7.1: A Mass Falling from Height H . . . . . . . . . . . . . . . . . . . . . 53
Example 1.7.2: A Constant Force in One Dimension . . . . . . . . . . . . . . . . . . 58
1.7.1: Solving Problems with More Than One Object . . . . . . . . . . . . . . . . . . 61
Example 1.7.3: Atwoods Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Example 1.7.4: Braking for Bikes, or Just Breaking Bikes? . . . . . . . . . . . . . . . 63
1.8: Motion in Two Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
1.8.1: Free Flight Trajectories Projectile Motion . . . . . . . . . . . . . . . . . . . 66
Example 1.8.1: Trajectory of a Cannonball . . . . . . . . . . . . . . . . . . . . . . . 66
1.8.2: The Inclined Plane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Example 1.8.2: The Inclined Plane . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
1.9: Circular Motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
1.9.1: Tangential Velocity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
1.9.2: Centripetal Acceleration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Example 1.9.1: Ball on a String . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Example 1.9.2: Tether Ball/Conic Pendulum . . . . . . . . . . . . . . . . . . . . . . 75
1.9.3: Tangential Acceleration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
1.10: Conclusion: Rubric for Newtons Second Law Problems . . . . . . . . . . . . . . . . 77
Week 2: Newtons Laws: Continued 95
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
2.1: Friction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Example 2.1.1: Inclined Plane of Length L with Friction . . . . . . . . . . . . . . . . 98
Example 2.1.2: Block Hanging o of a Table . . . . . . . . . . . . . . . . . . . . . . . 100
Example 2.1.3: Find The Minimum No-Skid Braking Distance for a Car . . . . . . . 102
Example 2.1.4: Car Rounding a Banked Curve with Friction . . . . . . . . . . . . . . 104
2.2: Drag Forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
2.2.1: Stokes, or Laminar Drag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
2.2.2: Rayleigh, or Turbulent Drag . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
2.2.3: Terminal velocity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Example 2.2.1: Falling From a Plane and Surviving . . . . . . . . . . . . . . . . . . . 112
Example 2.2.2: Solution to Equations of Motion for Stokes Drag . . . . . . . . . . . 113
2.2.4: Advanced: Solution to Equations of Motion for Turbulent Drag . . . . . . . . 114
Example 2.2.3: Dropping the Ram . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
2.3: Inertial Reference Frames the Galilean Transformation . . . . . . . . . . . . . . . . 117
2.3.1: Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
2.3.2: Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
CONTENTS iii
2.4: Non-Inertial Reference Frames Pseudoforces . . . . . . . . . . . . . . . . . . . . . . 121
2.4.1: Identifying Inertial Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Example 2.4.1: Weight in an Elevator . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Example 2.4.2: Pendulum in a Boxcar . . . . . . . . . . . . . . . . . . . . . . . . . . 125
2.4.2: Advanced: General Relativity and Accelerating Frames . . . . . . . . . . . . . 127
2.5: Just For Fun: Hurricanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Week 3: Work and Energy 141
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
3.1: Work-Kinetic Energy Theorem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
3.1.1: Units of Work and Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
3.1.2: Kinetic Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
3.1.3: Derivations of the Work-Kinetic Energy Theorem . . . . . . . . . . . . . . . . 146
Example 3.1.1: Pulling a Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Example 3.1.2: Range of a Spring Gun . . . . . . . . . . . . . . . . . . . . . . . . . . 150
3.2: Conservative Forces: Potential Energy . . . . . . . . . . . . . . . . . . . . . . . . . . 151
3.2.1: Force from Potential Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
3.2.2: Potential Energy Function for Near-Earth Gravity . . . . . . . . . . . . . . . . 154
3.2.3: Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
3.3: Conservation of Mechanical Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
3.3.1: Force, Potential Energy, and Total Mechanical Energy . . . . . . . . . . . . . 156
Example 3.3.1: Falling Ball Reprise . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Example 3.3.2: Block Sliding Down Frictionless Incline Reprise . . . . . . . . . . . . 157
Example 3.3.3: A Simple Pendulum . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Example 3.3.4: Looping the Loop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
3.4: Generalized Work-Mechanical Energy Theorem . . . . . . . . . . . . . . . . . . . . . 160
Example 3.4.1: Block Sliding Down a Rough Incline . . . . . . . . . . . . . . . . . . 160
Example 3.4.2: A Spring and Rough Incline . . . . . . . . . . . . . . . . . . . . . . . 161
3.4.1: Heat and Conservation of Energy . . . . . . . . . . . . . . . . . . . . . . . . . 162
3.5: Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Example 3.5.1: Rocket Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
3.6: Equilibrium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
3.6.1: Energy Diagrams: Turning Points and Forbidden Regions . . . . . . . . . . . . 166
Week 4: Systems of Particles, Momentum and Collisions 179
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
iv CONTENTS
4.1: Systems of Particles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
4.1.1: Newtons Laws for a System of Particles Center of Mass . . . . . . . . . . . 184
4.1.2: Coarse Graining: Continuous Mass Distributions . . . . . . . . . . . . . . . . . 186
Example 4.1.1: Center of Mass of a Continuous Rod . . . . . . . . . . . . . . . . . . 188
Example 4.1.2: Center of mass of a circular wedge . . . . . . . . . . . . . . . . . . . 189
Example 4.1.3: Breakup of Projectile in Midight . . . . . . . . . . . . . . . . . . . . 190
4.2: Momentum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
4.2.1: The Law of Conservation of Momentum . . . . . . . . . . . . . . . . . . . . . . 191
4.3: Impulse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Example 4.3.1: Average Force Driving a Golf Ball . . . . . . . . . . . . . . . . . . . 195
Example 4.3.2: Force, Impulse and Momentum for Windshield and Bug . . . . . . . 195
4.3.1: The Impulse Approximation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
4.3.2: Impulse, Fluids, and Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
4.4: Center of Mass Reference Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
4.5: Collisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
4.5.1: Momentum Conservation in the Impulse Approximation . . . . . . . . . . . . 201
4.5.2: Elastic Collisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
4.5.3: Fully Inelastic Collisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
4.5.4: Partially Inelastic Collisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
4.5.5: Dimension of Scattering and Sucient Information . . . . . . . . . . . . . . . 202
4.6: 1-D Elastic Collisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
4.6.1: The Relative Velocity Approach . . . . . . . . . . . . . . . . . . . . . . . . . . 205
4.6.2: 1D Elastic Collision in the Center of Mass Frame . . . . . . . . . . . . . . . . 206
4.6.3: The BB/bb or Pool Ball Limits . . . . . . . . . . . . . . . . . . . . . . . . 208
4.7: Elastic Collisions in 2-3 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
4.8: Inelastic Collisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
Example 4.8.1: One-dimensional Fully Inelastic Collision (only) . . . . . . . . . . . . 212
Example 4.8.2: Ballistic Pendulum . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
Example 4.8.3: Partially Inelastic Collision . . . . . . . . . . . . . . . . . . . . . . . 215
4.9: Kinetic Energy in the CM Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Week 5: Torque and Rotation in One Dimension 231
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
5.1: Rotational Coordinates in One Dimension . . . . . . . . . . . . . . . . . . . . . . . . 232
5.2: Newtons Second Law for 1D Rotations . . . . . . . . . . . . . . . . . . . . . . . . . . 234
5.2.1: The r-dependence of Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
CONTENTS v
5.2.2: Summing the Moment of Inertia . . . . . . . . . . . . . . . . . . . . . . . . . . 238
5.3: The Moment of Inertia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
Example 5.3.1: The Moment of Inertia of a Rod Pivoted at One End . . . . . . . . . 239
5.3.1: Moment of Inertia of a General Rigid Body . . . . . . . . . . . . . . . . . . . . 239
Example 5.3.2: Moment of Inertia of a Ring . . . . . . . . . . . . . . . . . . . . . . . 240
Example 5.3.3: Moment of Inertia of a Disk . . . . . . . . . . . . . . . . . . . . . . . 241
5.3.2: Table of Useful Moments of Inertia . . . . . . . . . . . . . . . . . . . . . . . . 242
5.4: Torque as a Cross Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
Example 5.4.1: Rolling the Spool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
5.5: Torque and the Center of Gravity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
Example 5.5.1: The Angular Acceleration of a Hanging Rod . . . . . . . . . . . . . . 245
5.6: Solving Newtons Second Law Problems Involving Rolling . . . . . . . . . . . . . . . 245
Example 5.6.1: A Disk Rolling Down an Incline . . . . . . . . . . . . . . . . . . . . . 246
Example 5.6.2: Atwoods Machine with a Massive Pulley . . . . . . . . . . . . . . . . 248
5.7: Rotational Work and Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
5.7.1: Work Done on a Rigid Object . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
5.7.2: The Rolling Constraint and Work . . . . . . . . . . . . . . . . . . . . . . . . . 251
Example 5.7.1: Work and Energy in Atwoods Machine . . . . . . . . . . . . . . . . 252
Example 5.7.2: Unrolling Spool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
Example 5.7.3: A Rolling Ball Loops-the-Loop . . . . . . . . . . . . . . . . . . . . . 254
5.8: The Parallel Axis Theorem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
Example 5.8.1: Moon Around Earth, Earth Around Sun . . . . . . . . . . . . . . . . 257
Example 5.8.2: Moment of Inertia of a Hoop Pivoted on One Side . . . . . . . . . . 257
5.9: Perpendicular Axis Theorem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
Example 5.9.1: Moment of Inertia of Hoop for Planar Axis . . . . . . . . . . . . . . 260
Week 6: Vector Torque and Angular Momentum 273
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
6.1: Vector Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
6.2: Total Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
6.2.1: The Law of Conservation of Angular Momentum . . . . . . . . . . . . . . . . . 276
6.3: The Angular Momentum of a Symmetric Rotating Rigid Object . . . . . . . . . . . . 277
Example 6.3.1: Angular Momentum of a Point Mass Moving in a Circle . . . . . . . 279
Example 6.3.2: Angular Momentum of a Rod Swinging in a Circle . . . . . . . . . . 279
Example 6.3.3: Angular Momentum of a Rotating Disk . . . . . . . . . . . . . . . . 280
Example 6.3.4: Angular Momentum of Rod Sweeping out Cone . . . . . . . . . . . . 281
vi CONTENTS
6.4: Angular Momentum Conservation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
Example 6.4.1: The Spinning Professor . . . . . . . . . . . . . . . . . . . . . . . . . . 281
6.4.1: Radial Forces and Angular Momentum Conservation . . . . . . . . . . . . . . 282
Example 6.4.2: Mass Orbits On a String . . . . . . . . . . . . . . . . . . . . . . . . . 283
6.5: Collisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
Example 6.5.1: Fully Inelastic Collision of Ball of Putty with a Free Rod . . . . . . . 287
Example 6.5.2: Fully Inelastic Collision of Ball of Putty with Pivoted Rod . . . . . . 291
6.5.1: More General Collisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
6.6: Angular Momentum of an Asymmetric Rotating Rigid Object . . . . . . . . . . . . . 292
Example 6.6.1: Rotating Your Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . 295
6.7: Precession of a Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
Example 6.7.1: Finding
p
From L/t (Average) . . . . . . . . . . . . . . . . . . . 298
p
from L and t Separately . . . . . . . . . . . . . . . . 298
p
from Calculus . . . . . . . . . . . . . . . . . . . . . . . . 299
Week 7: Statics 309
Statics Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
7.1: Conditions for Static Equilibrium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
7.2: Static Equilibrium Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
Example 7.2.1: Balancing a See-Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . 312
Example 7.2.2: Two Saw Horses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
Example 7.2.3: Hanging a Tavern Sign . . . . . . . . . . . . . . . . . . . . . . . . . . 314
7.2.1: Equilibrium with a Vector Torque . . . . . . . . . . . . . . . . . . . . . . . . . 315
Example 7.2.4: Building a Deck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
7.3: Tipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
Example 7.3.1: Tipping Versus Slipping . . . . . . . . . . . . . . . . . . . . . . . . . 317
Example 7.3.2: Tipping While Pushing . . . . . . . . . . . . . . . . . . . . . . . . . . 319
7.4: Force Couples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
Example 7.4.1: Rolling the Cylinder Over a Step . . . . . . . . . . . . . . . . . . . . 321
III: Applications of Mechanics 335
Week 8: Fluids 335
Fluids Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
8.1: General Fluid Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
8.1.1: Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
CONTENTS vii
8.1.2: Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338
8.1.3: Compressibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
8.1.4: Viscosity and uid ow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
8.1.5: Properties Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341
Static Fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342
8.1.6: Pressure and Connement of Static Fluids . . . . . . . . . . . . . . . . . . . . 342
8.1.7: Pressure and Connement of Static Fluids in Gravity . . . . . . . . . . . . . . 343
8.1.8: Variation of Pressure in Incompressible Fluids . . . . . . . . . . . . . . . . . . 346
Example 8.1.1: Barometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346
Example 8.1.2: Variation of Oceanic Pressure with Depth . . . . . . . . . . . . . . . 347
8.1.9: Variation of Pressure in Compressible Fluids . . . . . . . . . . . . . . . . . . . 348
Example 8.1.3: Variation of Atmospheric Pressure with Height . . . . . . . . . . . . 349
8.2: Pascals Principle and Hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
Example 8.2.1: A Hydraulic Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
8.3: Fluid Displacement and Buoyancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352
8.3.1: Archimedes Principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 354
Example 8.3.1: Testing the Crown I . . . . . . . . . . . . . . . . . . . . . . . . . . . 355
Example 8.3.2: Testing the Crown II . . . . . . . . . . . . . . . . . . . . . . . . . . . 356
8.4: Fluid Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358
8.4.1: Conservation of Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359
8.4.2: Work-Mechanical Energy in Fluids: Bernoullis Equation . . . . . . . . . . . . 362
Example 8.4.1: Emptying the Iced Tea . . . . . . . . . . . . . . . . . . . . . . . . . . 363
8.4.3: Fluid Viscosity and Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . 363
8.4.4: A Brief Note on Turbulence . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366
8.5: The Human Circulatory System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367
Example 8.5.1: Atherosclerotic Plaque Partially Occludes a Blood Vessel . . . . . . . 371
Example 8.5.2: Aneurisms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372
Example 8.5.3: The Girae . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373
Week 9: Oscillations 383
Oscillation Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383
9.1: The Simple Harmonic Oscillator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384
9.1.1: The Archetypical Simple Harmonic Oscillator: A Mass on a Spring . . . . . . 385
9.1.2: The Simple Harmonic Oscillator Solution . . . . . . . . . . . . . . . . . . . . . 390
9.1.3: Plotting the Solution: Relations Involving . . . . . . . . . . . . . . . . . . . 391
9.1.4: The Energy of a Mass on a Spring . . . . . . . . . . . . . . . . . . . . . . . . . 392
viii CONTENTS
9.2: The Pendulum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 392
9.2.1: The Physical Pendulum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394
9.3: Damped Oscillation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 396
9.3.1: Properties of the Damped Oscillator . . . . . . . . . . . . . . . . . . . . . . . . 398
Example 9.3.1: Car Shock Absorbers . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
9.4: Damped, Driven Oscillation: Resonance . . . . . . . . . . . . . . . . . . . . . . . . . 401
9.4.1: Harmonic Driving Forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403
9.4.2: Solution to Damped, Driven, Simple Harmonic Oscillator . . . . . . . . . . . . 405
9.5: Elastic Properties of Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 407
9.5.1: Simple Models for Molecular Bonds . . . . . . . . . . . . . . . . . . . . . . . . 408
9.5.2: The Force Constant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 410
9.5.3: A Microscopic Picture of a Solid . . . . . . . . . . . . . . . . . . . . . . . . . . 411
9.5.4: Shear Forces and the Shear Modulus . . . . . . . . . . . . . . . . . . . . . . . 413
9.5.5: Deformation and Fracture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
9.6: Human Bone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 416
Example 9.6.1: Scaling of Bones with Animal Size . . . . . . . . . . . . . . . . . . . 418
Week 10: The Wave Equation 429
Wave Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429
10.1: Waves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430
10.2: Waves on a String . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431
10.3: Solutions to the Wave Equation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
10.3.1: An Important Property of Waves: Superposition . . . . . . . . . . . . . . . . 433
10.3.2: Arbitrary Waveforms Propagating to the Left or Right . . . . . . . . . . . . . 433
10.3.3: Harmonic Waveforms Propagating to the Left or Right . . . . . . . . . . . . 433
10.3.4: Stationary Waves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 434
10.4: Reection of Waves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 436
10.5: Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 437
Homework for Week 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439
Week 11: Sound 451
Sound Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 451
11.1: Sound Waves in a Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453
11.2: Sound Wave Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 454
11.3: Sound Wave Intensity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 454
11.3.1: Sound Displacement and Intensity In Terms of Pressure . . . . . . . . . . . . 455
11.3.2: Sound Pressure and Decibels . . . . . . . . . . . . . . . . . . . . . . . . . . . 457
CONTENTS ix
11.4: Doppler Shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 459
11.4.1: Moving Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 459
11.4.2: Moving Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 460
11.4.3: Moving Source and Moving Receiver . . . . . . . . . . . . . . . . . . . . . . . 461
11.5: Standing Waves in Pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 461
11.5.1: Pipe Closed at Both Ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 461
11.5.2: Pipe Closed at One End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 462
11.5.3: Pipe Open at Both Ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 463
11.6: Beats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 464
11.7: Interference and Sound Waves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 464
11.8: The Ear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 466
Week 12: Gravity 477
Gravity Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477
12.1: Cosmological Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 481
12.2: Keplers Laws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 485
12.2.1: Ellipses and Conic Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 486
12.3: Newtons Law of Gravitation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 488
12.4: The Gravitational Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494
12.4.1: Spheres, Shells, General Mass Distributions . . . . . . . . . . . . . . . . . . . 495
12.5: Gravitational Potential Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 496
12.6: Energy Diagrams and Orbits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497
12.7: Escape Velocity, Escape Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498
Example 12.7.1: How to Cause an Extinction Event . . . . . . . . . . . . . . . . . . 499
12.8: Bridging the Gap: Coulombs Law and Electrostatics . . . . . . . . . . . . . . . . . 500
x CONTENTS
Preface
This introductory mechanics text is intended to be used in the rst semester of a two-semester
series of courses teaching introductory physics at the college level, followed by a second semester
course in introductory electricity and magnetism, and optics. The text is intended to sup-
port teaching the material at a rapid, but advanced level it was developed to support teaching
introductory calculus-based physics to potential physics majors, engineers, and other natural science
majors at Duke University over a period of more than thirty years.
Students who hope to succeed in learning physics from this text will need, as a minimum pre-
requisite, a solid grasp of basic mathematics. It is strongly recommended that all students
have mastered mathematics at least through single-variable dierential calculus (typied by the AB
advanced placement test or a rst-semester college calculus course). Students should also be taking
(or have completed) single variable integral calculus (typied by the BC advanced placement test or
a second-semester college calculus course). In the text it is presumed that students are competent in
geometry, trigonometry, algebra, and single variable calculus; more advanced multivariate calculus
is used in a number of places but it is taught in context as it is needed and is always separable
into two or three independent one-dimensional integrals.
Many students are, unfortunately weak in their mastery of mathematics at the time they take
physics. This enormously complicates the process of learning for them, especially if they are years
removed from when they took their algebra, trig, and calculus classes (as is frequently the case for
pre-medical students taking the course in their junior year of college). For that reason, a separate
supplementary text intended specically to help students of introductory physics quickly
and eciently review the required math is being prepared as a companion volume to all
semesters of introductory physics. Indeed, it should really be quite useful for any course being
taught with any textbook series and not just this one.
This book is located here:
http://www.phy.duke.edu/rgb/Class/math for intro physics.php
and I strongly suggest that all students who are reading these words preparing to begin studying
physics pause for a moment, visit this site, and either download the pdf or bookmark the site.
Note that Week 0: How to Learn Physics is not part of the course per se, but I usually do a
quick review of this material (as well as the course structure, grading scheme, and so on) in my rst
lecture of any given semester, the one where students are still nding the room, dropping and adding
courses, and one cannot present real content in good conscience unless you plan to do it again in
the second lecture as well. Students greatly benet from guidance on how to study, as most enter
physics thinking that they can master it with nothing but the memorization and rote learning skills
that have served them so well for their many other fact-based classes. Of course this is completely
false physics is reason based and conceptual and it requires a very dierent pattern of study than
simply staring at and trying to memorize lists of formulae or examples.
Students, however, should not count on their instructor doing this they need to be self-actualized
in their study from the beginning. It is therefore strongly suggested that all students read this
xi
xii CONTENTS
preliminary chapter right away as their rst assignment whether or not it is covered in the rst
lecture or assigned. In fact, (if youre just such a student reading these words) you can always decide
to read it right now (as soon as you nish this Preface). It wont take you an hour, and might make
as much as a full letter dierence (to the good) in your nal grade. What do you have to lose?
Even if you think that you are an excellent student and learn things totally eortlessly, I strongly
suggest reading it. It describes a new perspective on the teaching and learning process supported
by very recent research in neuroscience and psychology, and makes very specic suggestions as to
the best way to proceed to learn physics.
Finally, the Introduction is a rapid summary of the entire course! If you read it and look at the
pictures before beginning the course proper you can get a good conceptual overview of everything
youre going to learn. If you begin by learning in a quick pass the broad strokes for the whole course,
when you go through each chapter in all of its detail, all those facts and ideas have a place to live
in your mind.
Thats the primary idea behind this textbook in order to be easy to remember, ideas need a
house, a place to live. Most courses try to build you that house by giving you one nail and piece of
wood at a time, and force you to build it in complete detail from the ground up.
Real houses arent built that way at all! First a foundation is established, then the frame of the
whole house is erected, and then, slowly but surely, the frame is wired and plumbed and drywalled
and nished with all of those picky little details. It works better that way. So it is with learning.
Textbook Layout and Design
This textbook has a design that is just about perfectly backwards compared to most textbooks that
currently cover the subject. Here are its primary design features:
All mathematics required by the student is reviewed in a standalone, cross-referenced (free)
work at the beginning of the book rather than in an appendix that many students never nd.
There are only twelve chapters. The book is organized so that it can be sanely taught in a
single college semester with at most a chapter a week.
It begins each chapter with an abstract and chapter summary. Detail, especially lecture-note
style mathematical detail, follows the summary rather than the other way around.
This text does not spend page after page trying to explain in English how physics works
(prose which to my experience nobody reads anyway). Instead, a terse lecture note style
presentation outlines the main points and presents considerable mathematical detail to support
solving problems.
Verbal and conceptual understanding is, of course, very important. It is expected to come
from verbal instruction and discussion in the classroom and recitation and lab. This textbook
relies on having a committed and competent instructor and a sensible learning process.
Each chapter ends with a short (by modern standards) selection of challenging homework
problems. A good student might well get through all of the problems in the book, rather than
at most 10% of them as is the general rule for other texts.
The problems are weakly sorted out by level, as this text is intended to support non-physics
science and pre-health profession students, engineers, and physics majors all three. The ma-
terial covered is of course the same for all three, but the level of detail and diculty of the
math used and required is a bit dierent.
CONTENTS xiii
The textbook is entirely algebraic in its presentation and problem solving requirements with
very few exceptions no calculators should be required to solve problems. The author assumes
that any student taking physics is capable of punching numbers into a calculator, but it is
algebra that ultimately determines the formula that they should be computing. Numbers are
used in problems only to illustrate what reasonable numbers might be for a given real-
world physical situation or where the problems cannot reasonably be solved algebraically (e.g.
resistance networks).
This layout provides considerable benets to both instructor and student. This textbook supports
a top-down style of learning, where one learns each distinct chapter topic by quickly getting the main
points onboard via the summary, then derives them or explores them in detail, then applies them
to example problems. Finally one uses what one has started to learn working in groups and with
direct mentoring and support from the instructors, to solve highly challenging problems that cannot
be solved without acquiring the deeper level of understanding that is, or should be, the goal one is
striving for.
Its without doubt a lot of work. Nobody said learning physics would be easy, and this book
certainly doesnt claim to make it so. However, this approach will (for most students) work.
The reward, in the end, is the ability to see the entire world around you through new eyes,
understanding much of the magic of the causal chain of physical forces that makes all things
unfold in time. Natural Law is a strange, beautiful sort of magic; one that is utterly impersonal and
mechanical and yet lled with structure and mathematics and light. It makes sense, both in and of
itself and of the physical world you observe.
Enjoy.
xiv CONTENTS
I: Getting Ready to Learn Physics
1
Preliminaries
See, Do, Teach
If you are reading this, I assume that you are either taking a course in physics or wish to learn physics
on your own. If this is the case, I want to begin by teaching you the importance of your personal
engagement in the learning process. If it comes right down to it, how well you learn physics, how
good a grade you get, and how much fun you have all depend on how enthusiastically you tackle
the learning process. If you remain disengaged, detatched from the learning process, you almost
certainly will do poorly and be miserable while doing it. If you can nd any degree of engagement
or open enthusiasm with the learning process you will very likely do well, or at least as well as
possible.
Note that I use the term learning, not teaching this is to emphasize from the beginning that
learning is a choice and that you are in control. Learning is active; being taught is passive. It is up
to you to seize control of your own educational process and fully participate, not sit back and wait
for knowledge to be forcibly injected into your brain.
You may nd yourself stuck in a course that is taught in a traditional way, by an instructor that
lectures, assigns some readings, and maybe on a good day puts on a little dog-and-pony show in
the classroom with some audiovisual aids or some demonstrations. The standard expectation in this
class is to sit in your chair and watch, passive, taking notes. No real engagement is required by
the instructor, and lacking activities or a structure that encourages it, you lapse into becoming a
lecture transcription machine, recording all kinds of things that make no immediate sense to you
and telling yourself that youll sort it all out later.
You may nd yourself oundering in such a class for good reason. The instructor presents an
ocean of material in each lecture, and youre going to actually retain at most a few cupfuls of it
functioning as a scribe and passively copying his pictures and symbols without rst extracting their
sense. And the lecture makes little sense, at least at rst, and reading (if you do any reading at all)
does little to help. Demonstrations can sometimes make one or two ideas come clear, but only at
the expense of twenty other things that the instructor now has no time to cover and expects you
to get from the readings alone. You continually postpone going over the lectures and readings to
understand the material any more than is strictly required to do the homework, until one day a big
test draws nigh and you realize that you really dont understand anything and have forgotten most
of what you did, briey, understand. Doom and destruction loom.
Sound familiar?
On the other hand, you may be in a course where the instructor has structured the course with
a balanced mix of open lecture (held as a freeform discussion where questions arent just encouraged
but required) and group interactive learning situations such as a carefully structured recitation and
lab where discussion and doing blend together, where students teach each other and use what they
have learned in many ways and contexts. If so, youre lucky, but luck only goes so far.
3
4 Preliminaries
Even in a course like this you may still be oundering because you may not understand why it
is important for you to participate with your whole spirit in the quest to learn anything you ever
choose to study. In a word, you simply may not give a rodents furry behind about learning the
material so that studying is always a ght with yourself to make yourself do it so that no matter
what happens, you lose. This too may sound very familiar to some.
The importance of engagement and participation in active learning (as opposed to passively
being taught) is not really a new idea. Medical schools were four year programs in the year 1900.
They are four year programs today, where the amount of information that a physician must now
master in those four years is probably ten times greater today than it was back then. Medical
students are necessarily among the most ecient learners on earth, or they simply cannot survive.
In medical schools, the optimal learning strategy is compressed to a three-step adage: See one,
do one, teach one.
See a procedure (done by a trained expert).
Do the procedure yourself, with the direct supervision and guidance of a trained expert.
Teach a student to do the procedure.
See, do, teach. Now you are a trained expert (of sorts), or at least so we devoutly hope, because
thats all the training you are likely to get until you start doing the procedure over and over again
with real humans and with limited oversight from an attending physician with too many other things
to do. So you practice and study on your own until you achieve real mastery, because a mistake can
kill somebody.
This recipe is quite general, and can be used to increase your own learning in almost any class.
In fact, lifelong success in learning with or without the guidance of a good teacher is a matter of
discovering the importance of active engagement and participation that this recipe (non-uniquely)
encodes. Let us rank learning methodologies in terms of probable degree of active engagement of
the student. By probable I mean the degree of active engagement that I as an instructor have
observed in students over many years and which is signicantly reinforced by research in teaching
methodology, especially in physics and mathematics.
Listening to a lecture as a transcription machine with your brain in copy machine mode is
almost entirely passive and is for most students probably a nearly complete waste of time. Thats
not to say that lecture in the form of an organized presentation and review of the material to be
learned isnt important or is completely useless! It serves one very important purpose in the grand
scheme of learning, but by being passive during lecture you cause it to fail in its purpose. Its purpose
is not to give you a complete, line by line transcription of the words of your instructor to ponder
later and alone. It is to convey, for a brief shining moment, the sense of the concepts so that you
understand them.
It is dicult to suciently emphasize this point. If lecture doesnt make sense to you when the
instructor presents it, you will have to work much harder to achieve the sense of the material later,
if later ever comes at all. If you fail to identify the important concepts during the presentation
and see the lecture as a string of disconnected facts, you will have to remember each fact as if it
were an abstract string of symbols, placing impossible demands on your memory even if you are
extraordinarily bright. If you fail to achieve some degree of understanding (or synthesis of the
material, if you prefer) in lecture by asking questions and getting expert explanations on the spot,
you will have to build it later out of your notes on a set of abstract symbols that made no sense to
you at the time. You might as well be trying to translate Egyptian Hieroglyphs without a Rosetta
Stone, and the best of luck to you with that.
Reading is a bit more active at the very least your brain is more likely to be somewhat engaged if
you arent just transcribing the book onto a piece of paper or letting the words and symbols happen
in your mind but is still pretty passive. Even watching nifty movies or cool-ee-oh demonstrations
Preliminaries 5
is basically sedentary youre still just sitting there while somebody or something else makes it all
happen in your brain while you arent doing much of anything. At best it grabs your attention a bit
better (on average) than lecture, but you are mentally passive.
In all of these forms of learning, the single active thing you are likely to be doing is taking notes
or moving an eye muscle from time to time. For better or worse, the human brain isnt designed
to learn well in passive mode. Parts of your brain are likely to take charge and pull your eyes
irresistably to the window to look outside where active things are going on, things that might not
be so damn boring!
With your active engagement, with your taking charge of and participating in the learning
process, things change dramatically. Instead of passively listening in lecture, you can at least try to
ask questions and initiate discussions whenever an idea is presented that makes no intial sense to you.
Discussion is an active process even if you arent the one talking at the time. You participate! Even
a tiny bit of participation in a classroom setting where students are constantly asking questions,
where the instructor is constantly answering them and asking the students questions in turn makes
a huge dierence. Humans being social creatures, it also makes the class a lot more fun!
In summary, sitting on your ass
1
and writing meaningless (to you, so far) things down as some-
body says them in the hopes of being able to study them and discover their meaning on your own
later is boring and for most students, later never comes because you are busy with many classes,
because you havent discovered anything beautiful or exciting (which is the reward for guring it
all out if you ever get there) and then there is partying and hanging out with friends and having
fun. Even if you do nd the time and really want to succeed, in a complicated subject like physics
you are less likely to be able to discover the meaning on your own (unless you are so bright that
learning methodology is irrelevant and you learn in a single pass no matter what). Most introduc-
tory students are swamped by the details, and have small chance of discovering the patterns within
those details that constitute making sense and make the detailed information much, much easier
to learn by enabling a compression of the detail into a much smaller set of connected ideas.
Articulation of ideas, whether it is to yourself or to others in a discussion setting, requires you
to create tentative patterns that might describe and organize all the details you are being presented
with. Using those patterns and applying them to the details as they are presented, you naturally
encounter places where your tentative patterns are wrong, or dont quite work, where something
doesnt make sense. In an active lecture students participate in the process, and can ask
questions and kick ideas around until they do make sense. Participation is also fun and helps you
pay far more attention to whats going on than when you are in passive mode. It may be that
this increased attention, this consideration of many alternatives and rejecting some while retaining
others with social reinforcement, is what makes all the dierence. To learn optimally, even seeing
must be an active process, one where you are not a vessel waiting to be lled through your eyes
but rather part of a team studying a puzzle and looking for the patterns together that will help you
eventually solve it.
Learning is increased still further by doing, the very essence of activity and engagement. Doing
varies from course to course, depending on just what there is for you to do, but it always is the
application of what you are learning to some sort of activity, exercise, problem. It is not just a
recapitulation of symbols: looking over your notes or (re)reading the text. The symbols for any
given course of study (in a physics class, they very likely will be algebraic symbols for real although
Im speaking more generally here) do not, initially, mean a lot to you. If I write

F = q(v

B) on
the board, it means a great deal to me, but if you are taking this course for the rst time it probably
means zilch to you, and yet I pop it up there, draw some pictures, make some noises that hopefully
make sense to you at the time, and blow on by. Later you read it in your notes to try to recreate
that sense, but youve forgotten most of it. Am I describing the income I expect to make selling

B
1
I mean, of course, your donkey. What did you think I meant?
6 Preliminaries
tons of barley with a market value of v and a prot margin of q?
To learn this expression (for yes, this is a force law of nature and one that we very much must
learn this semester) we have to learn what the symbols stand for q is the charge of a point-like
object in motion at velocity v in a magnetic eld

B, and

F is the resulting force acting on the
particle. We have to learn that the symbol is the cross product of evil (to most students at any
rate, at least at rst). In order to get a gut feeling for what this equation represents, for the directions
associated with the cross product, for the trajectories it implies for charged particles moving in a
magnetic eld in a variety of contexts one has to use this expression to solve problems, see this
expression in action in laboratory experiments that let you prove to yourself that it isnt bullshit
and that the world really does have cross product force laws in it. You have to do your homework
that involves this law, and be fully engaged.
The learning process isnt exactly linear, so if you participate fully in the discussion and the
doing while going to even the most traditional of lectures, you have an excellent chance of getting
to the point where you can score anywhere from a 75% to an 85% in the course. In most schools,
say a C+ to B+ performance. Not bad, but not really excellent. A few students will still get As
they either work extra hard, or really like the subject, or they have some sort of secret, some way
of getting over that barrier at the 90s that is only crossed by those that really do understand the
material quite well.
Here is the secret for getting yourself over that 90% hump, even in a physics class (arguably one
of the most dicult courses you can take in college), even if youre not a super-genius (or have never
managed in the past to learn like one, a glance and youre done): Work in groups!
Thats it. Nothing really complex or horrible, just get together with your friends who are also
taking the course and do your homework together. In a well designed physics course (and many
courses in mathematics, economics, and other subjects these days) youll have some aspects of the
class, such as a recitation or lab, where you are required to work in groups, and the groups and group
activities may be highly structured or freeform. Studio or Team Based Learning methods for
teaching physics have even wrapped the lecture itself into a group-structured setting, so everything
is done in groups/teams, and (probably by making it nearly impossible to be disengaged and sit
passively in class waiting for learning to happen) this approach yields measureable improvements
(all things being equal) on at least some objective instruments for measurement of learning.
If you take charge of your own learning, though, you will quickly see that in any course, however
taught, you can study in a group! This is true even in a course where the homework is to be
done alone by at of the (unfortunately ignorant and misguided) instructor. Just study around
the actual assignment assign yourselves problems like the actual assignment most textbooks
have plenty of extra problems and then there is the Internet and other textbooks and do them in
a group, then (afterwards!) break up and do your actual assignment alone. Note that if you use a
completely dierent textbook to pick your group problems from and do them together before looking
at your assignment in your textbook, you cant even be blamed if some of the ones you pick turn
out to be ones your instructor happened to assign.
Oh, and not-so-subtly give the instructor a PDF copy of this book (its free for instructors,
after all, and a click away on the Internet) and point to this page and paragraph containing the
following little message from me to them:
Yo! Teacher! Lets wake up and smell the coee! Dont prevent your students from doing
homework in groups require it! Make the homework correspondingly more dicult!
Give them quite a lot of course credit for doing it well! Construct a recitation or review
session where students in groups who still cannot get the most dicult problems
can get socratic tutorial help after working hard on the problems on their own! Inte-
grate discussion and deliberately teach to increase active engagement (instead of passive
Preliminaries 7
wandering attention) in lecture
2
. Then watch as student performance and engagement
spirals into the stratosphere compared to what it was before...
Then pray. Some instructors have their egos tied up in things to the point where they cannot
learn, and then what can you do? If an instructor lets ego or politics obstruct their search for
functional methodology, youre screwed anyway, and you might as well just tackle the material on
your own. Or heck, maybe their expertise and teaching experience vastly exceeds my own so that
their naked words are suciently golden that any student should be able to learn by just hearing
them and doing homework all alone in isolation from any peer-interaction process that might be of
use to help them make sense of it all all data to the contrary.
My own words and lecture in spite of my 31 years of experience in the classroom, in spite of the
fact that it has been well over twenty years since I actually used lecture notes to teach the course,
in spite of the fact I never, ever prepare for recitation because solving the homework problems with
the students cold as a peer member of their groups is useful where copying my privately worked
out solutions onto a blackboard for them to passively copy on their papers in turn is useless, in
spite of the fact that I wrote this book similarly without the use of any outside resource my words
and lecture are not. On the other hand, students who work eectively in groups and learn to use
this book (and other resources) and do all of the homework to perfection might well learn physics
quite well without my involvement at all!
Lets understand why working in groups has such a dramatic eect on learning. What happens
in a group? Well, a lot of discussion happens, because humans working on a common problem like
to talk. There is plenty of doing going on, presuming that the group has a common task list to work
through, like a small mountain of really dicult problems that nobody can possibly solve working on
their own and are barely within their abilities working as a group backed up by the course instructor!
Finally, in a group everybody has the opportunity to teach!
The importance of teaching not only seeing the lecture presentation with your whole brain
actively engaged and participating in an ongoing discussion so that it makes sense at the time,
not only doing lots of homework problems and exercises that apply the material in some way, but
articulating what you have discovered in this process and answering questions that force you to
consider and reject alternative solutions or pathways (or not) cannot be overemphasized. Teaching
each other in a peer setting (ideally with mentorship and oversight to keep you from teaching each
other mistakes) is essential!
This problem you get, and teach others (and actually learn it better from teaching it than they
do from your presentation never begrudge the eort required to teach your group peers even if
some of them are very slow to understand). The next problem you dont get but some other group
member does they get to teach you. In the end you all learn far more about every problem as
a consequence of the struggle, the exploration of false paths, the discovery and articulation of the
correct path, the process of discussion, resolution and agreement in teaching whereby everybody in
the group reaches full understanding.
I would assert that it is all but impossible for someone to become a (halfway decent) teacher
of anything without learning along the way that the absolute best way to learn any set of material
deeply is to teach it it is the very foundation of Academe and has been for two or three thousand
2
Perhaps by using Team Based Learning methods to structure and balance student groups and ipping classrooms
to foist the lecture o onto videos of somebody else lecturing to increase the time spent in the class working in groups,
but Ive found that in mid-sized classes and smaller (less than around fty students) one can get very good results
from traditional lecture without a specially designed classroom by the Chocolate Method I lecture without notes and
oer a piece of chocolate or cheap toy or nifty pencil to any student who catches me making a mistake on the board
before I catch it myself, who asks a particularly good question, who looks like they are nodding o to sleep (seriously,
chocolate works wonders here, especially when ceremoniously oered). Anything that keeps students focussed during
lecture by making it into a game, by allowing/encouraging them to speak out without raising their hands, by praising
them and rewarding them for engagement makes a huge dierence.
8 Preliminaries
years. It is, as we have noted, built right into the intensive learning process of medical school and
graduate school in general. For some reason, however, we dont incorporate a teaching component
in most undergraduate classes, which is a shame, and it is basically nonexistent in nearly all K-12
schools, which is an open tragedy.
As an engaged student you dont have to live with that! Put it there yourself, by incorporating
group study and mutual teaching into your learning process with or without the help or permission
of your teachers! A really smart and eective group soon learns to iterate the teaching I teach
you, and to make sure you got it you immediately use the material I taught you and try to articulate
it back to me. Eventually everybody in the group understands, everybody in the group benets,
everybody in the group gets the best possible grade on the material. This process will actually make
you (quite literally) more intelligent. You may or may not become smart enough to lock down an
A, but you will get the best grade you are capable of getting, for your given investment of eort.
This is close to the ultimate in engagement highly active learning, with all cylinders of your
brain ring away on the process. You can see why learning is enhanced. It is simply a bonus, a sign
of a just and caring God, that it is also a lot more fun to work in a group, especially in a relaxed
context with food and drink present. Yes, Im encouraging you to have physics study parties (or
history study parties, or psychology study parties). Hold contests. Give silly prizes. See. Do. Teach.
Other Conditions for Learning
Learning isnt only dependent on the engagement pattern implicit in the See, Do, Teach rule. Lets
absorb a few more True Facts about learning, in particular lets come up with a handful of things
that can act as switches and turn your ability to learn on and o quite independent of how your
instructor structures your courses. Most of these things arent binary switches they are more like
dimmer switches that can be slid up between dim (but not o) and bright (but not fully on). Some
of these switches, or environmental parameters, act together more powerfully than they act alone.
Well start with the most important pair, a pair that research has shown work together to potentiate
or block learning.
Instead of just telling you what they are, arguing that they are important for a paragraph or six,
and moving on, Im going to give you an early opportunity to practice active learning in the context
of reading a chapter on active learning. That is, I want you to participate in a tiny mini-experiment.
It works a little bit better if it is done verbally in a one-on-one meeting, but it should still work well
enough even if it is done in this text that you are reading.
Im going to give you a string of ten or so digits and ask you to glance at it one time for a count
of three and then look away. No fair peeking once your three seconds are up! Then I want you to do
something else for at least a minute anything else that uses your whole attention and interrupts
your ability to rehearse the numbers in your mind in the way that youve doubtless learned permits
you to learn other strings of digits, such as holding your mind blank, thinking of the phone numbers
of friends or your social security number. Even rereading this paragraph will do.
At the end of the minute, try to recall the number I gave you and write down what you remember.
Then turn back to right here and compare what you wrote down with the actual number.
Ready? (No peeking yet...) Set? Go!
Ok, here it is, in a footnote at the bottom of the page to keep your eye from naturally reading
ahead to catch a glimpse of it while reading the instructions above
3
.
How did you do?
If you are like most people, this string of numbers is a bit too long to get into your immediate
3
1357986420 (one, two, three, quit and do something else for one minute...)
Preliminaries 9
memory or visual memory in only three seconds. There was very little time for rehearsal, and then
you went and did something else for a bit right away that was supposed to keep you from rehearsing
whatever of the string you did manage to verbalize in three seconds. Most people will get anywhere
from the rst three to as many as seven or eight of the digits right, but probably not in the correct
order, unless...
...they are particularly smart or lucky and in that brief three second glance have time to notice
that the number consists of all the digits used exactly once! Folks that happened to see this at a
glance probably did better than average, getting all of the correct digits but maybe in not quite the
correct order.
People who are downright brilliant (and equally lucky) realized in only three seconds (without
cheating an extra second or three, you know who you are) that it consisted of the string of odd digits
in ascending order followed by the even digits in descending order. Those people probably got it all
perfectly right even without time to rehearse and memorize the string! Look again at the string,
see the pattern now?
The moral of this little mini-demonstration is that it is easy to overwhelm the minds capacity
for processing and remembering meaningless or random information. A string of ten measely
(apparently) random digits is too much to remember for one lousy minute, especially if you arent
given time to do rehearsal and all of the other things we have to make ourselves do to memorize
meaningless information.
Of course things changed radically the instant I pointed out the pattern! At this point you could
very likely go away and come back to this point in the text tomorrow or even a year from now and
have an excellent chance of remembering this particular digit string, because it makes sense of a sort,
and there are plenty of cues in the text to trigger recall of the particular pattern that compresses
and encodes the actual string. You dont have to remember ten random things at all only two
and a half odd ascending digits followed by the opposite (of both). Patterns rock!
This example has obvious connections to lecture and class time, and is one reason retention from
lecture is so lousy. For most students, lecture in any nontrivial college-level course is a long-running
litany of stu they dont know yet. Since it is all new to them, it might as well be random digits
as far as their cognitive abilities are concerned, at least at rst. Sure, there is pattern there, but
you have to discover the pattern, which requires time and a certain amount of meditation on all of
the information. Basically, you have to have a chance for the pattern to jump out of the stream
of information and punch the switch of the damn light bulb we all carry around inside our heads,
the one that is endlessly portrayed in cartoons. That light bulb is real it actually exists, in more
than just a metaphorical sense and if you study long enough and hard enough to obtain a sudden,
epiphinaic realization in any topic you are studying, however trivial or complex (like the pattern
exposed above) it is quite likely to be accompanied by a purely mental ash of light. Youll know
it when it happens to you, in other words, and it feels great.
Unfortunately, the instructor doesnt usually give students a chance to experience this in lecture.
No sooner is one seemingly random factoid laid out on the table than along comes a new, apparently
disconnected one that pushes it out of place long before we can either memorize it the hard way or
make sense out of it so we can remember it with a lot less work. This isnt really anybodys fault,
of course; the light bulb is quite unlikely to go o in lecture just from lecture no matter what you
or the lecturer do it is something that happens to the prepared mind at the end of a process, not
something that just res away every time you hear a new idea.
The humble and unsurprising conclusion I want you to draw from this silly little mini-experiment
is that things are easier to learn when they make sense! A lot easier. In fact, things that dont make
sense to you are never learned they are at best memorized. Information can almost always
be compressed when you discover the patterns that run through it, especially when the patterns
all t together into the marvelously complex and beautiful and mysterious process we call deep
10 Preliminaries
understanding of some subject.
There is one more example I like to use to illustrate how important this information compression
is to memory and intelligence. I play chess, badly. That is, I know the legal moves of the game,
and have no idea at all how to use them eectively to improve my position and eventually win. Ten
moves into a typical chess game I cant recall how I got myself into the mess Im typically in, and
at the end of the game I probably cant remember any of what went on except that I got trounced,
again.
A chess master, on the other hand, can play umpty games at once, blindfolded, against pitiful
fools like myself and when theyve nished winning them all they can go back and recontruct each
one move by move, criticizing each move as they go. Often they can remember the games in their
entirety days or even years later.
This isnt just because they are smarter they might be completely unable to derive the Lorentz
group from rst principles, and I can, and this doesnt automatically make me smarter than them
either. It is because chess makes sense to them theyve achieved a deep understanding of the game,
as it were and theyve built a complex meta-structure memory in their brains into which they can
poke chess moves so that they can be retrieved extremely eciently. This gives them the attendant
capability of searching vast portions of the game tree at a glance, where I have to tediously work
through each branch, one step at a time, usually omitting some really important possibility because
I dont realize that that knight on the far side of the board can aect things on this side where we
are both moving pieces.
This sort of deep (synthetic) understanding of physics is very much the goal of this course (the
one in the textbook you are reading, since I use this intro in many textbooks), and to achieve it you
must not memorize things as if they are random factoids, you must work to abstract the beautiful
intertwining of patterns that compress all of those apparently random factoids into things that you
can easily remember ohand, that you can easily reconstruct from the pattern even if you forget
the details, and that you can search through at a glance. But the process I describe can be applied
to learning pretty much anything, as patterns and structure exist in abundance in all subjects of
interest. There are even sensible rules that govern or describe the anti-pattern of pure randomness!
Theres one more important thing you can learn from thinking over the digit experiment. Some
of you reading this very likely didnt do what I asked, you didnt play along with the game. Perhaps
it was too much of a bother you didnt want to waste a whole minute learning something by
actually doing it, just wanted to read the damn chapter and get it over with so you could do, well,
whatever the hell else it is you were planning to do today thats more important to you than physics
or learning in other courses.
If youre one of these people, you probably dont remember any of the digit string at this point
from actually seeing it you never even tried to memorize it. A very few of you may actually be so
terribly jaded that you dont even remember the little mnemonic formula I gave above for the digit
string (although frankly, people that are that disengaged are probably not about to do things like
actually read a textbook in the rst place, so possibly not). After all, either way the string is pretty
damn meaningless, pattern or not.
Pattern and meaning arent exactly the same thing. There are all sorts of patterns one can
nd in random number strings, they just arent real (where we could wax poetic at this point
about information entropy and randomness and monkeys typing Shakespeare if this were a dierent
course). So why bother wasting brain energy on even the easy way to remember this string when
doing so is utterly unimportant to you in the grand scheme of all things?
From this we can learn the second humble and unsurprising conclusion I want you to draw from
this one elementary thought experiment. Things are easier to learn when you care about learning
them! In fact, they are damn near impossible to learn if you really dont care about learning them.
Preliminaries 11
Lets put the two observations together and plot them as a graph, just for fun (and because
graphs help one learn for reasons we will explore just a bit in a minute). If you care about learning
what you are studying, and the information you are trying to learn makes sense (if only for a moment,
perhaps during lecture), the chances of your learning it are quite good. This alone isnt enough to
guarantee that youll learn it, but it they are basically both necessary conditions, and one of them
is directly connected to degree of engagement.
Figure 1: Relation between sense, care and learning
On the other hand, if you care but the information you want to learn makes no sense, or if it
makes sense but you hate the subject, the instructor, your school, your life and just dont care, your
chances of learning it arent so good, probably a bit better in the rst case than in the second as
if you care you have a chance of nding someone or some way that will help you make sense of
whatever it is you wish to learn, where the person who doesnt cares, well, they dont care. Why
should they remember it?
If you dont give a rats ass about the material and it makes no sense to you, go home. Leave
school. Do something else. You basically have almost no chance of learning the material unless you
are gifted with a transcendent intelligence (wasted on a dilettante who lives in a state of perpetual
ennui) and are miraculously gifted with the ability learn things eortlessly even when they make no
sense to you and you dont really care about them. All the learning tricks and study patterns in the
world wont help a student who doesnt try, doesnt care, and for whom the material never makes
sense.
If we worked at it, we could probably nd other logistic controlling parameters to associate
with learning things that increase your probability of learning monotonically as they vary. Some of
12 Preliminaries
them are already apparent from the discussion above. Lets list a few more of them with explanations
just so that you can see how easy it is to sit down to study and try to learn and have something
wrong that decreases your ability to learn in that particular place and time.
Learning is actual work and involves a fair bit of biological stress, just like working out. Your
brain needs food it burns a whopping 20-30% of your daily calorie intake all by itself just living
day to day, even more when you are really using it or are somewhat sedentary in your physical
habits. Note that your brain runs on pure, energy-rich glucose, so when your blood sugar drops
your brain activity drops right along with it. This can happen (paradoxically) because you just ate
a carbohydrate rich meal. A balanced diet containing foods with a lower glycemic index
4
tends
to be harder to digest and provides a longer period of sustained energy for your brain. A daily
multivitamin (and various antioxidant supplements such as alpha lipoic acid) can also help maintain
your bodys energy release mechanisms at the cellular level.
Blood sugar is typically lowest rst thing in the morning, so this is a lousy time to actively
study. On the other hand, a good hearty breakfast, eaten at least an hour before plunging in to your
studies, is a great idea and is a far better habit to develop for a lifetime than eating no breakfast
and instead eating a huge meal right before bed.
Learning requires adequate sleep. Sure this is tough to manage at college there are no parents
to tell you to go to bed, lots of things to do, and of course youre in class during the day and then
you study, so late night is when you have fun. Unfortunately, learning is clearly correlated with
engagement, activity, and mental alertness, and all of these tend to shut down when youre tired.
Furthermore, the formation of long term memory of any kind from a days experiences has been
shown in both animal and human studies to depend on the brain undergoing at least a few natural
sleep cycles of deep sleep alternating with REM (Rapid Eye Movement) sleep, dreaming sleep. Rats
taught a maze and then deprived of REM sleep cannot run the maze well the next day; rats that
are taught the same maze but that get a good nights of rat sleep with plenty of rat dreaming can
run the maze well the next day. People conked on the head who remain unconscious for hours and
are thereby deprived of normal sleep often have permanent amnesia of the previous day it never
gets turned into long term memory.
This is hardly surprising. Pure common sense and experience tell you that your brain wont work
too well if it is hungry and tired. Common sense (and yes, experience) will rapidly convince you
that learning generally works better if youre not stoned or drunk when you study. Learning works
much better when you have time to learn and havent put everything o to the last minute. In fact,
all of Maslows hierarchy of needs
5
are important parameters that contribute to the probability of
success in learning.
There is one more set of very important variables that strongly aect our ability to learn, and
they are in some ways the least well understood. These are variables that describe you as an
individual, that describe your particular brain and how it works. Pretty much everybody will learn
better if they are self-actualized and fully and actively engaged, if the material they are trying to
learn is available in a form that makes sense and clearly communicates the implicit patterns that
enable ecient information compression and storage, and above all if they care about what they are
studying and learning, if it has value to them.
But everybody is not the same, and the optimal learning strategy for one person is not going to
be what works well, or even at all, for another. This is one of the things that confounds simple
empirical research that attempts to nd benet in one teaching/learning methodology over another.
4
Wikipedia: http://www.wikipedia.org/wiki/glycemic index.
5
Wikipedia: http://www.wikipedia.org/wiki/Maslows hierarchy of needs. In a nutshell, in order to become self-
actualized and realize your full potential in activities such as learning you need to have your physiological needs met,
you need to be safe, you need to be loved and secure in the world, you need to have good self-esteem and the esteem
of others. Only then is it particularly likely that you can become self-actualized and become a great learner and
problem solver.
Preliminaries 13
Some students do improve, even dramatically improve when this or that teaching/learning method-
ology is introduced. In others there is no change. Still others actually do worse. In the end, the
benecial eect to a selected subgroup of the students may be lost in the statistical noise of the
study and the fact that no attempt is made to identify commonalities among students that succeed
or fail.
The point is that nding an optimal teaching and learning strategy is technically an optimization
problem on a high dimensional space. Weve discussed some of the important dimensions above,
isolating a few that appear to have a monotonic eect on the desired outcome in at least some range
(relying on common sense to cut o that range or suggest trade-os one cannot learn better by
simply discussing one idea for weeks at the expense of participating in lecture or discussing many
other ideas of equal and coordinated importance; sleeping for twenty hours a day leaves little time
for experience to x into long term memory with all of that sleep). Weve omitted one that is crucial,
however. That is your brain!
Your Brain and Learning
Your brain is more than just a unique instrument. In some sense it is you. You could imagine having
your brain removed from your body and being hooked up to machinary that provided it with sight,
sound, and touch in such a way that you remain
6
. It is dicult to imagine that you still exist
in any meaningful sense if your brain is taken out of your body and destroyed while your body is
articially kept alive.
Your brain, however, is an instrument. It has internal structure. It uses energy. It does work.
It is, in fact, a biological machine of sublime complexity and subtlety, one of the true wonders of the
world! Note that this statement can be made quite independent of whether you are your brain
per se or a spiritual being who happens to be using it (a debate that need not concern us at this
time, however much fun it might be to get into it) either way the brain itself is quite marvelous.
For all of that, few indeed are the people who bother to learn to actually use their brain eectively
as an instrument. It just works, after all, whether or not we do this. Which is ne. If you want to
get the most mileage out of it, however, it helps to read the manual.
So heres at least one user manual for your brain. It is by no means complete or authoritative,
but it should be enough to get you started, to help you discover that you are actually a lot smarter
than you think, or that youve been in the past, once you realize that you can change the way you
think and learn and experience life and gradually improve it.
In the spirit of the learning methodology that we eventually hope to adopt, lets simply itemize
in no particular order the various features of the brain
7
that bear on the process of learning. Bear
in mind that such a minimal presentation is more of a metaphor than anything else because simple
(and extremely common) generalizations such as creativity is a right-brain function are not strictly
true as the brain is far more complex than that.
The brain is bicameral: it has two cerebral hemispheres
8
, right and left, with brain functions
asymmetrically split up between them.
The brains hemispheres are connected by a networked membrane called the corpus callosum
that is how the two halves talk to each other.
The human brain consists of layers with a structure that recapitulates evolutionary phylogeny;
that is, the core structures are found in very primitive animals and common to nearly all
6
Imagine very easily if youve ever seen The Matrix movie trilogy...
7
Wikipedia: http://www.wikipedia.org/wiki/brain.
8
Wikipedia: http://www.wikipedia.org/wiki/cerebral hemisphere.
14 Preliminaries
vertebrate animals, with new layers (apparently) added by evolution on top of this core as
the various phyla dierentiated, sh, amphibian, reptile, mammal, primate, human. The
outermost layer where most actual thinking occurs (in animals that think) is known as the
cerebral cortex.
The cerebral cortex
9
especially the outermost layer of it called the neocortex is where
higher thought activities associated with learning and problem solving take place, although
the brain is a very complex instrument with functions spread out over many regions.
An important brain model is a neural network
10
. Computer simulated neural networks provide
us with insight into how the brain can remember past events and process new information.
The fundamental operational units of the brains information processing functionality are called
neurons
11
. Neurons receive electrochemical signals from other neurons that are transmitted
through long bers called axons
12
Neurotransmitters
13
are the actual chemicals responsible
for the triggered functioning of neurons and hence the neural network in the cortex that spans
the halves of the brain.
Parts of the cortex are devoted to the senses. These parts often contain a map of sorts of the
world as seen by the associated sense mechanism. For example, there exists a topographic map
in the brain that roughly corresponds to points in the retina, which in turn are stimulated by
an image of the outside world that is projected onto the retina by your eyes lens in a way we
will learn about later in this course! There is thus a representation of your visual eld laid out
inside your brain!
Similar maps exist for the other senses, although sensations from the right side of your body
are generally processed in a laterally inverted way by the opposite hemisphere of the brain.
What your right eye sees, what your right hand touches, is ultimately transmitted to a sensory
area in your left brain hemisphere and vice versa, and volitional muscle control ows from
these brain halves the other way.
Neurotransmitters require biological resources to produce and consume bioenergy (provided
as glucose) in their operation. You can exhaust the resources, and saturate the receptors for
the various neurotransmitters on the neurons by overstimulation.
You can also block neurotransmitters by chemical means, put neurotransmitter analogues into
your system, and alter the chemical trigger potentials of your neurons by taking various drugs,
poisons, or hormones. The biochemistry of your brain is extremely important to its function,
and (unfortunately) is not infrequently a bit out of whack for many individuals, resulting
in e.g. attention decit or mood disorders that can greatly aect ones ability to easily learn
while leaving one otherwise highly functional.
Intelligence
14
, learning ability, and problem solving capabilities are not xed; they can vary
(often improving) over your whole lifetime! Your brain is highly plastic and can sometimes
even reprogram itself to full functionality when it is e.g. damaged by a stroke or accident.
On the other hand neither is it innitely plastic any given brain has a range of accessible
capabilities and can be improved only to a certain point. However, for people of supposedly
normal intelligence and above, it is by no means clear what that point is! Note well that
intelligence is an extremely controversial subject and you should not take things like your own
measured IQ too seriously.
9
Wikipedia: http://www.wikipedia.org/wiki/Cerebral cortex.
10
Wikipedia: http://www.wikipedia.org/wiki/Neural network.
11
Wikipedia: http://www.wikipedia.org/wiki/Neurons.
12
Wikipedia: http://www.wikipedia.org/wiki/axon. .
13
Wikipedia: http://www.wikipedia.org/wiki/neurotransmitters.
14
Wikipedia: http://www.wikipedia.org/wiki/intelligence.
Preliminaries 15
Intelligence is not even xed within a population over time. A phenomenon known as the
Flynn eect
15
(after its discoverer) suggests that IQ tests have increased almost six points a
decade, on average, over a timescale of tens of years, with most of the increases coming from
the lower half of the distribution of intelligence. This is an active area of research (as one might
well imagine) and some of that research has demonstrated fairly conclusively that individual
intelligences can be improved by ve to ten points (a signicant amount) by environmentally
correlated factors such as nutrition, education, complexity of environment.
The best time for the brain to learn is right before sleep. The process of sleep appears to
x long term memories in the brain and things one studies right before going to bed are
retained much better than things studied rst thing in the morning. Note that this conicts
directly with the party/entertainment schedule of many students, who tend to study early in
the evening and then amuse themselves until bedtime. It works much better the other way
around.
Sensory memory
16
corresponds to the roughly 0.5 second (for most people) that a sensory
impression remains in the brains active sensory register, the sensory cortex. It can typically
hold less than 12 objects that can be retrieved. It quickly decays and cannot be improved
by rehearsal, although there is some evidence that its object capacity can be improved over a
longer term by practice.
Short term memory is where some of the information that comes into sensory memory is
transferred. Just which information is transferred depends on where ones attention is,
and the mechanics of the attention process are not well understood and are an area of active
research. Attention acts like a ltering process, as there is a wealth of parallel information in our
sensory memory at any given instant in time but the thread of our awareness and experience
of time is serial. We tend to pay attention to one thing at a time. Short term memory lasts
from a few seconds to as long as a minute without rehearsal, and for nearly all people it holds
4 5 objects
17
. However, its capacity can be increased by a process called chunking that
is basically the information compression mechanism demonstrated in the earlier example with
numbers grouping of the data to be recalled into objects that permit a larger set to still
t in short term memory.
Studies of chunking show that the ideal size for data chunking is three. That is, if you try to
remember the string of letters:
FBINSACIAIBMATTMSN
with the usual three second look youll almost certainly nd it impossible. If, however, I insert
the following spaces:
FBI NSA CIA IBM ATT MSN
It is suddenly much easier to get at least the rst four. If I parenthesize:
(FBI NSA CIA) (IBM ATT MSN)
so that you can recognize the rst three are all government agencies in the general category of
intelligence and law enforcement and the last three are all market symbols for information
technology mega-corporations, you can once again recall the information a day later with only
the most cursory of rehearsals. Youve taken eighteen random objects that were meaningless
and could hence be recalled only through the most arduous of rehearsal processes, converted
them to six chunks of three that can be easily tagged by the brains existing long term
memory (note that you are not learning the string FBI, you are building an association to the
15
Wikipedia: http://www.wikipedia.org/wiki/ynn eect.
16
Wikipedia: http://www.wikipedia.org/wiki/memory. Several items in a row are connected to this page.
17
From this you can see why I used ten digits, gave you only a few seconds to look, and blocked rehearsal in our
earlier exercise.
16 Preliminaries
already existing memory of what the string FBI means, which is much easier for the brain to
do), and chunking the chunks into two objects.
Eighteen objects without meaning dicult indeed! Those same eighteen objects with meaning
umm, looks pretty easy, doesnt it...
Short term memory is still that short term. It typically decays on a time scale that ranges
from minutes for nearly everything to order of a day for a few things unless the information
can be transferred to long term memory. Long term memory is the big payo learning is
associated with formation of long term memory.
Now we get to the really good stu. Long term is memory that you form that lasts a long
time in human terms. A long time can be days, weeks, months, years, or a lifetime. Long
term memory is encoded completely dierently from short term or sensory/immediate memory
it appears to be encoded semantically
18
, that is to say, associatively in terms of its meaning.
There is considerable evidence for this, and it is one reason we focus so much on the importance
of meaning in the previous sections.
To miraculously transform things we try to remember from dicult to learn random factoids
that have to be brute-force stued into disconnected semantic storage units created as it were
one at a time for the task at hand into easy to learn factoids, all we have to do is discover
meaning associations with things we already know, or create a strong memory of the global
meaning or conceptualization of a subject that serves as an associative home for all those little
factoids.
A characteristic of this as a successful process is that when one works systematically to learn
by means of the latter process, learning gets easier as time goes on. Every factoid you add
to the semantic structure of the global conceptualization strengthens it, and makes it even
easier to add new factoids. In fact, the minds extraordinary rational capacity permits it to
interpolate and extrapolate, to ll in parts of the structure on its own without eort and in
many cases without even being exposed to the information that needs to be learned!
One area where this extrapolation is particularly evident and powerful is in mathematics. Any
time we can learn, or discover from experience a formula for some phenomenon, a mathematical
pattern, we dont have to actually see something to be able to remember it. Once again,
it is easy to nd examples. If I give you data from sales gures over a year such as January
= $1000, October = $10,000, December = $12,000, March=$3000, May = $5000, February
= $2000, September = $9000, June = $6000, November = $11,000, July = $7000, August =
$8000, April = $4000, at rst glance they look quite dicult to remember. If you organize
them temporally by month and look at them for a moment, you recognize that sales increased
linearly by month, starting at $1000 in January, and suddenly you can reduce the whole series
to a simple mental formula (straight line) and a couple pieces of initial data (slope and starting
point). One amazing thing about this is that if I asked you to remember something that
you have not seen, such as sales in February in the next year, you could make a very plausible
guess that they will be $14,000!
Note that this isnt a memory, it is a guess. Guessing is what the mind is designed to do, as
it is part of the process by which it predicts the future even in the most mundane of ways.
When I put ten dollars in my pocket and reach in my pocket for it later, Im basically guessing,
on the basis of my memory and experience, that Ill nd ten dollars there. Maybe my guess is
wrong my pocket could have been picked
19
, maybe it fell out through a hole. My concept of
object permanence plus my memory of an initial state permit me to make a predictive guess
about the Universe!
18
Wikipedia: http://www.wikipedia.org/wiki/semantics.
19
With three sons constantly looking for funds to attend movies and the like, it isnt as unlikely as you might think!
Preliminaries 17
This is, in fact, physics! This is what physics is all about coming up with a set of rules (like
conservation of matter) that encode observations of object permanence, more rules (equations
of motion) that dictate how objects move around, and allow me to conclude that I put a ten
dollar bill, at rest, into my pocket, and objects at rest remain at rest. The matter the bill
is made of cannot be created or destroyed and is bound together in a way that is unlikely to
come apart over a period of days. Therefore the ten dollar bill is still there! Nearly anything
that you do or that happens in your everyday life can be formulated as a predictive physics
problem.
The hippocampus
20
appears to be partly responsible for both forming spatial maps or visual-
izations of your environment and also for forming the cognitive map that organizes what you
know and transforms short term memory into long term memory, and it appears to do its job
(as noted above) in your sleep. Sleep deprivation prevents the formation of long term memory.
Being rendered unconscious for a long period often produces short term amnesia as the brain
loses short term memory before it gets put into long term memory. The hippocampus shows
evidence of plasticity taxi drivers who have to learn to navigate large cities actually have
larger than normal hippocampi, with a size proportional to the length of time theyve been
driving. This suggests (once again) that it is possible to deliberately increase the capacity of
your own hippocampus through the exercise of its functions, and consequently increase your
ability to store and retrieve information, which is an important component (although not the
only component) of intelligence!
Memory is improved by increasing the supply of oxygen to the brain, which is best accom-
plished by exercise. Unsurprisingly. Indeed, as noted above, having good general health, good
nutrition, good oxygenation and perfusion having all the biomechanism in tip-top running
order is perfectly reasonably linked to being able to perform at your best in anything, mental
activity included.
Finally, the amygdala
21
is a brain organ in our limbic system (part of our old, reptile brain).
The amygdala is an important part of our emotional system. It is associated with primitive
survival responses, with sexual response, and appears to play a key role in modulating (ltering)
the process of turning short term memory into long term memory. Basically, any short term
memory associated with a powerful emotion is much more likely to make it into long term
memory.
There are clear evolutionary advantages to this. If you narrowly escape being killed by a
saber-toothed tiger at a particular pool in the forest, and then forget that this happened by
the next day and return again to drink there, chances are decent that the saber-tooth is still
there and youll get eaten. On the other hand, if you come upon a particular fruit tree in that
same forest and get a free meal of high quality food and forget about the tree a day later, you
might starve.
We see that both negative and positive emotional experiences are strongly correlated with
learning! Powerful experiences, especially, are correlated with learning. This translates into
learning strategies in two ways, one for the instructor and one for the student. For the in-
structor, there are two general strategies open to helping students learn. One is to create an
atmosphere of fear, hatred, disgust, anger powerful negative emotions. The other is to create
an atmosphere of love, security, humor, joy powerful positive emotions. In between there is
a great wasteland of bo-ring, bo-ring, bo-ring where students plod along, struggling to form
memories because there is nothing exciting about the course in either a positive or negative
way and so their amygdala degrades the memory formation process in favor of other more
interesting experiences.
20
Wikipedia: http://www.wikipedia.org/wiki/hippocampus.
21
Wikipedia: http://www.wikipedia.org/wiki/amygdala.
18 Preliminaries
Now, in my opinion, negative experiences in the classroom do indeed promote the formation
of long term memories, but they arent the memories the instructor intended. The student is
likely to remember, and loath, the instructor for the rest of their life but is not more likely to
remember the material except sporadically in association with particularly traumatic episodes.
They may well be less likely, as we naturally avoid negative experiences and will study less
and work less hard on things we cant stand doing.
For the instructor, then, positive is the way to go. Creating a warm, nurturing classroom
environment, ensuring that the students know that you care about their learning and about
them as individuals helps to promote learning. Making your lectures and teaching processes
fun and funny helps as well. Many successful lecturers make a powerful positive impression
on the students, creating an atmosphere of amazement or surprise. A classroom experience
should really be a joy in order to optimize learning in so many ways.
For the student, be aware that your attitude matters! As noted in previous sections, caring is
an essential component of successful learning because you have to attach value to the process
in order to get your amygdala to do its job. However, you can do much more. You can see
how many aspects of learning can be enhanced through the simple expedient of making it a
positive experience! Working in groups, working with a team of peers, is fun, and you learn
more when youre having fun (or quavering in abject fear, or in an interesting mix of the two).
Attending an interesting lecture is fun, and youll retain more than average. Participation is
fun, especially if you are rewarded in some way that makes a moment or two special to you,
and youll remember more of what goes on.
Chicken or egg? We see a fellow student who is relaxed and appears to be having fun because
they are doing really well in the course where we are constantly stressed out and struggling,
and we write their happiness o as being due to their success and our misery as being caused
by our failure. It is possible, however, that we have this backwards! Perhaps they are doing
really well in the course because they are relaxed and having fun, perhaps we are doing
not so well because for us, every minute in the classroom is a torture!
In any event, youve probably tried misery in the classroom in at least one class already. Howd
that work out for you? Perhaps it is worth trying joy, instead!
From all of these little factoids (presented in a way that Im hoping helps you to build at least
the beginnings of a working conceptual model of your own brain) Im hoping that you are coming
to realize that all of this is at least partially under your control! Even if your instructor is scary or
boring, the material at rst glance seems dry and meaningless, and so on all the negative-neutral
things that make learning dicult, you can decide to make it fun and exciting, you can ferret out
the meaning, you can adopt study strategies that focus on the formation of cognitive maps and
organizing structures rst and then on applications, rehearsal, factoids, and so on, you can learn to
study right before bed, get enough sleep, become aware of your brains learning biorhythms.
Finally, you can learn to increase your functional learning capabilities by a signicant amount.
Solving puzzles, playing mental games, doing crossword puzzles or sudoku, working homework prob-
lems, writing papers, arguing and discussing, just plain thinking about dicult subjects and problems
even when you dont have to all increase your active intelligence in initially small but cumulative
ways. You too can increase the size of your hippocampus by navigating a new subject instead of
a city, you too can learn to engage your amygdala by choosing in a self-actualized way what you
value and learning to discipline your emotions accordingly, you too can create more conceptual maps
within your brain that can be shared as components across the various things you wish to learn.
The more you know about anything, the easier it is to learn everything this is the
pure biology underlying the value of the liberal arts education.
Use your whole brain, exercise it often, dont think that you just need math and not spatial
relations, visualization, verbal skills, a knowledge of history, a memory of performing experiments
Preliminaries 19
with your hands or mind or both you need it all! Remember, just as is the case with physical
exercise (which you should get plenty of), mental exercise gradually makes you mentally stronger,
so that you can eventually do easily things that at rst appear insurmountably dicult. You can
learn to learn three to ten times as fast as you did in high school, to have more fun while doing it,
and to gain tremendous reasoning capabilities along the way just by trying to learn to learn more
eciently instead of continuing to use learning strategies that worked (possibly indierently) back
in elementary and high school.
The next section, at long last, will make a very specic set of suggestions for one very good way
to study physics (or nearly anything else) in a way that maximally takes advantage of your own
volitional biology to make learning as ecient and pleasant as it is possible to be.
How to Do Your Homework Eectively
By now in your academic career (and given the information above) it should be very apparent just
where homework exists in the grand scheme of (learning) things. Ideally, you attend a class where
a warm and attentive professor clearly explains some abstruse concept and a whole raft of facts in
some moderately interactive way that encourages engagement and being earnest. Alas, there are
too many facts to t in short term/immediate memory and too little time to move most of them
through into long term/working memory before nishing with one and moving on to the next one.
The material may appear to be boring and random so that it is dicult to pay full attention to the
patterns being communicated and remain emotionally enthusiastic all the while to help the process
along. As a consequence, by the end of lecture youve already forgotten many if not most of the
facts, but if you were paying attention, asked questions as needed, and really cared about learning
the material you would remember a handful of the most important ones, the ones that made your
brief understanding of the material hang (for a brief shining moment) together.
This conceptual overview, however initially tenuous, is the skeleton you will eventually clothe
with facts and experiences to transform it into an entire system of associative memory and reasoning
where you can work intellectually at a high level with little eort and usually with a great deal of
pleasure associated with the very act of thinking. But you arent there yet.
You now know that you are not terribly likely to retain a lot of what you are shown in lecture
without engagement. In order to actually learn it, you must stop being a passive recipient of facts.
You must actively develop your understanding, by means of discussing the material and kicking it
around with others, by using the material in some way, by teaching the material to peers as you
come to understand it.
To help facilitate this process, associated with lecture your professor almost certainly gave you
an assignment. Amazingly enough, its purpose is not to torment you or to be the basis of your grade
(although it may well do both). It is to give you some concrete stu to do while thinking about the
material to be learned, while discussing the material to be learned, while using the material to be
learned to accomplish specic goals, while teaching some of what you gure out to others who are
sharing this whole experience while being taught by them in turn. The assignment is much more
important than lecture, as it is entirely participatory, where real learning is far more likely to occur.
You could, once you learn the trick of it, blow o lecture and do ne in a course in all other respects.
If you fail to do the assignments with your entire spirit engaged, you are doomed.
In other words, to learn you must do your homework, ideally at least partly in a group setting.
The only question is: how should you do it to both nish learning all that stu you sort-of-got
in lecture and to re-attain the moment(s) of clarity that you then experienced, until eventually it
becomes a permanent characteristic of your awareness and you know and fully understand it all on
your own?
20 Preliminaries
There are two general steps that need to be iterated to nish learning anything at all. They
are a lot of work. In fact, they are far more work than (passively) attending lecture, and are more
important than attending lecture. You can learn the material with these steps without ever attending
lecture, as long as you have access to what you need to learn in some media or human form. You in
all probability will never learn it, lecture or not, without making a few passes through these steps.
They are:
a) Review the whole (typically textbooks and/or notes)
b) Work on the parts (do homework, use it for something)
(iterate until you thoroughly understand whatever it is you are trying to learn).
Lets examine these steps.
The rst is pretty obvious. You didnt get it from one lecture. There was too much material.
If you were lucky and well prepared and blessed with a good instructor, perhaps you grasped some of
it for a moment (and if your instructor was poor or you were particularly poorly prepared you may
not have managed even that) but what you did momentarily understand is fading, itting further
and further away with every moment that passes. You need to review the entire topic, as a whole, as
well as all its parts. A set of good summary notes might contain all the relative factoids, but there
are relations between those factoids a temporal sequencing, mathematical derivations connecting
them to other things you know, a topical association with other things that you know. They tell a
story, or part of a story, and you need to know that story in broad terms, not try to memorize it
word for word.
Reviewing the material should be done in layers, skimming the textbook and your notes, creating
a new set of notes out of the text in combination with your lecture notes, maybe reading in more detail
to understand some particular point that puzzles you, reworking a few of the examples presented.
Lots of increasingly deep passes through it (starting with the merest skim-reading or reading a
summary of the whole thing) are much better than trying to work through the whole text one line
at a time and not moving on until you understand it. Many things you might want to understand
will only come clear from things you are exposed to later, as it is not the case that all knowledge is
ordinal, hierarchical, and derivatory.
You especially do not have to work on memorizing the content. In fact, it is not desireable to
try to memorize content at this point you want the big picture rst so that facts have a place to
live in your brain. If you build them a house, theyll move right in without a fuss, where if you try
to grasp them one at a time with no place to put them, theyll (metaphorically) slip away again as
fast as you try to take up the next one. Lets understand this a bit.
As weve seen, your brain is fabulously ecient at storing information in a compressed associative
form. It also tends to remember things that are important whatever that means and forget things
that arent important to make room for more important stu, as your brain structures work together
in understandable ways on the process. Building the cognitive map, the house, is what its all
about. But as it turns out, building this house takes time.
This is the goal of your iterated review process. At rst you are memorizing things the hard way,
trying to connect what you learn to very simple hierarchical concepts such as this step comes before
that step. As you do this over and over again, though, you nd that absorbing new information
takes you less and less time, and you remember it much more easily and for a longer time without
additional rehearsal. Sometimes your brain even outruns the learning process and discovers a
missing part of the structure before you even read about it! By reviewing the whole, well-organized
structure over and over again, you gradually build a greatly compressed representation of it in
your brain and tremendously reduce the amount of work required to esh out that structure with
increasing levels of detail and remember them and be able to work with them for a long, long time.
Preliminaries 21
Now lets understand the second part of doing homework working problems. As you can
probably guess on your own at this point, there are good ways and bad ways to do homework
problems. The worst way to do homework (aside from not doing it at all, which is far too common
a practice and a bad idea if you have any intention of learning the material) is to do it all in one
sitting, right before it is due, and to never again look at it.
Doing your homework in a single sitting, working on it just one time fails to repeat and rehearse
the material (essential for turning short term memory into long term in nearly all cases). It exhausts
the neurons in your brain (quite literally there is metabolic energy consumed in thinking) as
one often ends up working on a problem far too long in one sitting just to get done. It fails
to incrementally build up in your brains long term memory the structures upon which the more
complex solutions are based, so you have to constantly go back to the book to get them into short
term memory long enough to get through a problem. Even this simple bit of repetition does initiate
a learning process. Unfortunately, by not repeating them after this one sitting they soon fade, often
without a discernable trace in long term memory.
Just as was the case in our experiment with memorizing the number above, the problems almost
invariably are not going to be a matter of random noise. They have certain key facts and ideas
that are the basis of their solution, and those ideas are used over and over again. There is plenty
of pattern and meaning there for your brain to exploit in information compression, and it may well
be very cool stu to know and hence important to you once learned, but it takes time and repetition
and a certain amount of meditation for the gestalt of it to spring into your awareness and burn
itself into your conceptual memory as high order understanding.
You have to give it this time, and perform the repetitions, while maintaining an optimistic,
philosophical attitude towards the process. You have to do your best to have fun with it. You dont
get strong by lifting light weights a single time. You get strong lifting weights repeatedly, starting
with light weights to be sure, but then working up to the heaviest weights you can manage. When
you do build up to where youre lifting hundreds of pounds, the fty pounds you started with seems
light as a feather to you.
As with the body, so with the brain. Repeat broad strokes for the big picture with increasingly
deep and heavy excursions into the material to explore it in detail as the overall picture emerges.
Intersperse this with sessions where you work on problems and try to use the material youve gured
out so far. Be sure to discuss it and teach it to others as you go as much as possible, as articulating
what youve gured out to others both uses a dierent part of your brain than taking it in (and
hence solidies the memory) and it helps you articulate the ideas to yourself ! This process will help
you learn more, better, faster than you ever have before, and to have fun doing it!
Your brain is more complicated than you think. You are very likely used to working hard to
try to make it gure things out, but youve probably observed that this doesnt work very well.
A lot of times you simply cannot gure things out because your brain doesnt yet know the key
things required to do this, or doesnt see how those parts you do know t together. Learning and
discovery is not, alas, intentional it is more like trying to get a bird to light on your hand that
its away the moment you try to grasp it.
People who do really hard crossword puzzles (one form of great brain exercise) have learned the
following. After making a pass through the puzzle and lling in all the words they can get, and
maybe making a couple of extra passes through thinking hard about ones they cant get right away,
looking for patterns, trying partial guesses, they arrive at an impasse. If they continue working hard
on it, they are unlikely to make further progress, no matter how long they stare at it.
On the other hand, if they put the puzzle down and do something else for a while especially if the
something else is go to bed and sleep when they come back to the puzzle they often can immediately
see a dozen or more words that the day before were absolutely invisible to them. Sometimes one of
the long theme answers (perhaps 25 characters long) where they have no more than two letters just
22 Preliminaries
gives up they can simply see what the answer must be.
Where do these answers come from? The person has not gured them out, they have recog-
nized them. They come all at once, and they dont come about as the result of a logical sequential
process.
Often they come from the persons right brain
22
. The left brain tries to use logic and simple
memory when it works on crosswork puzzles. This is usually good for some words, but for many of
the words there are many possible answers and without any insight one cant even recall one of the
possibilities. The clues dont suce to connect you up to a word. Even as letters get lled in this
continues to be the case, not because you dont know the word (although in really hard puzzles this
can sometimes be the case) but because you dont know how to recognize the word all at once
from a cleverly nonlinear clue and a few letters in this context.
The right brain is (to some extent) responsible for insight and non-linear thinking. It sees patterns,
and wholes, not sequential relations between the parts. It isnt intentional we cant make our
right brains gure something out, it is often the other way around! Working hard on a problem,
then sleeping on it (to get that all important hippocampal involvement going) is actually a great
way to develop insight that lets you solve it without really working terribly hard after a few tries.
It also utilizes more of your brain left and right brain, sequential reasoning and insight, and if you
articulate it, or use it, or make something with your hands, then it exercieses these parts of your
brain as well, strengthening the memory and your understanding still more. The learning that is
associated with this process, and the problem solving power of the method, is much greater than
just working on a problem linearly the night before it is due until you hack your way through it
using information assembled a part at a time from the book.
The following Method of Three Passes is a specic strategy that implements many of the
tricks discussed above. It is known to be eective for learning by means of doing homework (or in
a generalized way, learning anything at all). It is ideal for problem oriented homework, and will
pay o big in learning dividends should you adopt it, especially when supported by a group oriented
recitation with strong tutorial support and many opportunities for peer discussion and teaching.
The Method of Three Passes
Pass 1 Three or more nights before recitation (or when the homework is due), make a fast pass
through all problems. Plan to spend 1-1.5 hours on this pass. With roughly 10-12 problems,
this gives you around 6-8 minutes per problem. Spend no more than this much time per
problem and if you can solve them in this much time ne, otherwise move on to the next. Try
to do this the last thing before bed at night (seriously) and then go to sleep.
Pass 2 After at least one nights sleep, make a medium speed pass through all problems. Plan to
spend 1-1.5 hours on this pass as well. Some of the problems will already be solved from the
rst pass or nearly so. Quickly review their solution and then move on to concentrate on the
still unsolved problems. If you solved 1/4 to 1/3 of the problems in the rst pass, you should
be able to spend 10 minutes or so per problem in the second pass. Again, do this right before
bed if possible and then go immediately to sleep.
Pass 3 After at least one nights sleep, make a nal pass through all the problems. Begin as before
by quickly reviewing all the problems you solved in the previous two passes. Then spend fteen
minutes or more (as needed) to solve the remaining unsolved problems. Leave any impossible
problems for recitation there should be no more than three from any given assignment, as a
general rule. Go immediately to bed.
22
Note that this description is at least partly metaphor, for while there is some hemispherical specialization of some
of these functions, it isnt always sharp. Im retaining them here (oh you brain specialists who might be reading this)
because they are a valuable metaphor.
Preliminaries 23
This is an extremely powerful prescription for deeply learning nearly anything. Here is the moti-
vation. Memory is formed by repetition, and this obviously contains a lot of that. Permanent (long
term) memory is actually formed in your sleep, and studies have shown that whatever you study right
before sleep is most likely to be retained. Physics is actually a whole brain subject it requires
a synthesis of both right brain visualization and conceptualization and left brain verbal/analytical
processing both geometry and algebra, if you like, and youll often nd that problems that stumped
you the night before just solve themselves like magic on the second or third pass if you work hard
on them for a short, intense, session and then sleep on it. This is your right (nonverbal) brain
participating as it develops intuition to guide your left brain algebraic engine.
Other suggestions to improve learning include working in a study group for that third pass (the
rst one or two are best done alone to prepare for the third pass). Teaching is one of the best
ways to learn, and by working in a group youll have opportunities to both teach and learn more
deeply than you would otherwise as you have to articulate your solutions.
Make the learning fun the right brain is the key to forming long term memory and it is the seat
of your emotions. If you are happy studying and make it a positive experience, you will increase
retention, it is that simple. Order pizza, play music, make it a physics homework party night.
Use your whole brain on the problems draw lots of pictures and gures (right brain) to go with
the algebra (left brain). Listen to quiet music (right brain) while thinking through the sequences
of events in the problem (left brain). Build little demos of problems where possible even using
your hands in this way helps strengthen memory.
Avoid memorization. You will learn physics far better if you learn to solve problems and un-
derstand the concepts rather than attempt to memorize the umpty-zillion formulas, factoids, and
specic problems or examples covered at one time or another in the class. That isnt to say that you
shouldnt learn the important formulas, Laws of Nature, and all of that its just that the learning
should generally not consist of putting them on a big sheet of paper all jumbled together and then
trying to memorize them as abstract collections of symbols out of context.
Be sure to review the problems one last time when you get your graded homework back. Learn
from your mistakes or you will, as they say, be doomed to repeat them.
If you follow this prescription, you will have seen every assigned homework problem a minimum
of ve or six times three original passes, recitation itself, a nal write up pass after recitation, and
a review pass when you get it back. At least three of these should occur after you have solved all of
the problems correctly, since recitation is devoted to ensuring this. When the time comes to study
for exams, it should really be (for once) a review process, not a cram. Every problem will be like
an old friend, and a very brief review will form a seventh pass or eighth pass through the assigned
homework.
With this methodology (enhanced as required by the physics resource rooms, tutors, and help
from your instructors) there is no reason for you do poorly in the course and every reason to expect
that you will do well, perhaps very well indeed! And youll still be spending only the 3 to 6 hours
per week on homework that is expected of you in any college course of this level of diculty!
This ends our discussion of course preliminaries (for nearly any serious course you might take,
not just physics courses) and it is time to get on with the actual material for this course.
Mathematics
Physics, as was noted in the preface, requires a solid knowledge of all mathematics through calculus.
Thats right, the whole nine yards: number theory, algebra, geometry, trigonometry, vectors, dier-
ential calculus, integral calculus, even a smattering of dierential equations. Somebody may have
24 Preliminaries
told you that you can go ahead and take physics having gotten Cs in introductory calculus, perhaps
in a remedial course that you took because you had such a hard time with precalc or because you
failed straight up calculus when you took it.
They lied.
Sorry to be blunt, but thats the simple truth. Heres a list of a few of the kinds of things youll
have to be able to do during the next two semesters of physics. Dont worry just yet about what
they mean that is part of what you will learn along the way. The question is, can you (perhaps
with a short review of things youve learned and knew at one time but have not forgotten) evaluate
these mathematical expressions or solve for the algebraic unknowns? You dont necessarily have to
be able to do all of these things right this instant, but you should at the very least recognize most
of them and be able to do them with just a very short review:
What are the two values of that solve:
2
+
R
L
+
1
LC
= 0?
What is:
Q(r) =

0
R
4
_
r
0
r
3
dr
?
What is:
d cos(t +)
dt
?
x
y
?
?
A
What are the x and y components of a vector of length A that makes an angle of with the
positive x axis (proceeding, as usual, counterclockwise for positive )?
What is the sum of the two vectors

A = A
x
x +A
y
y and

B = B
x
y +B
y
y?
What is the inner/dot product of the two vectors

A = A
x
x +A
y
y and

B = B
x
y +B
y
y?
What is the cross product of the two vectors r = r
x
x and

F = F
y
y (magnitude and direction)?
If all of these items are unfamiliar you dont remember the quadratic formula (needed to solve
the rst one), cant integrate x
n
dx (needed to solve the second one), dont recall how to dierentiate
a sine or cosine function, dont recall your basic trigonometry so that you cant nd the components
of a vector from its length and angle or vice versa, and dont recall what the dot or cross product
of two vectors are, then you are going to have to add to the burden of learning physics per se the
burden of learning, or re-learning, all of the basic mathematics that would have permitted you to
answer these questions easily.
Here are the answers, see if this jogs your memory:
Preliminaries 25
Here are the two roots, found with the quadratic formula:
R
L

_
_
R
L
_
2
4
LC
2
=
R
2L

_
R
2
4L
2

1
LC
Q(r) =

0
R
4
_
r
0
r
3
dr
=

0
R
4
r
4
4
r
0
=

0
r
4
R
d cos(t +)
dt
= sin(t +)
A
x
= Acos() A
y
= Asin()
A+

B = (A
x
+B
x
) x + (A
y
+B
y
) y
A

B = A
x
B
x
+A
y
B
y
r

F = r
x
x F
y
y = r
x
F
y
( x y) = r
x
F
y
z
My strong advice to you, if you are now feeling the cold icy grip of panic because in fact you
are signed up for physics using this book and you couldnt answer any of these questions and dont
even recognize the answers once you see them, is to seek out the course instructor and review your
math skills with him or her to see if, in fact, it is advisable for you to take physics at this time or
rather should wait and strengthen your math skills rst. You can, and will, learn a lot of math while
taking physics and that is actually part of the point of taking it! If you are too weak going into it,
though, it will cost you some misery and hard work and some of the grade you might have gotten
with better preparation ahead of time.
So, what if you could do at least some of these short problems and can remember once learn-
ing/knowing the tools, like the Quadratic Formula, that you were supposed to use to solve them?
Suppose you are pretty sure that given a chance and resource to help you out you can do some
review and theyll all be fresh once again in time to keep up with the physics and still do well in
the course? What if you have no choice but to take physics now, and are just going to have to do
your best and relearn the math as required along the way? What if you did in fact understand math
pretty well once upon a time and are sure it wont be much of an obstacle, but you really would like
a review, a summary, a listing of the things you need to know someplace handy so you can instantly
look them up as you struggle with the problems that uses the math it contains? What if you are
(or were) really good at math, but want to be able to look at derivations or reread explanations to
bring stu you learned right back to your ngertips once again?
Hmmm, that set of questions spans the set of student math abilities from the near-tyro to the
near-expert. In my experience, everybody but the most mathematically gifted students can probably
benet from having a math review handy while taking this course. For all of you, then, I provide
the following free book online:
Mathematics for Introductory Physics
It is located here:
http://www.phy.duke.edu/rgb/Class/math for intro physics.php
26 Preliminaries
It is a work in progress, and is quite possibly still somewhat incomplete, but it should help you
with a lot of what you are missing or need to review, and if you let me know what you are missing
that you didnt nd there, I can work to add it!
I would strongly advise all students of introductory physics (any semester) to visit this site right
now and bookmark it or download the PDF, and to visit the site from time to time to see if Ive
posted an update. It is on my back burner, so to speak, until I nish the actual physics texts
themselves that Im working on, but I will still add things to them as motivated by my own needs
teaching courses using this series of books.
Summary
Thats enough preliminary stu. At this point, if youve read all of this weeks material and vowed
to adopt the method of three passes in all of your homework eorts, if youve bookmarked the math
help or downloaded it to your personal ebook viewer or computer, if youve realized that your brain
is actually something that you can help and enhance in various ways as you try to learn things, then
my purpose is well-served and you are as well-prepared as you can be to tackle physics.
Preliminaries 27
Homework for Week 0
Problem 1.
Skim read this entire section (Week 0: How to Learn Physics), then read it like a novel, front to
back. Think about the connection between engagement and learning and how important it is to try
to have fun in a physics course. Write a short essay (say, three paragraphs) describing at least one
time in the past where you were extremely engaged in a course you were taking, had lots of fun in
the class, and had a really great learning experience.
Problem 2.
Skim-read the entire content of Mathematics for Introductory Physics (linked above). Identify
things that it covers that you dont remember or dont understand. Pick one and learn it.
Problem 3.
Apply the Method of Three Passes to this homework assignment. You can either write three short
essays or revise your one essay three times, trying to improve it and enhance it each time for the
rst problem, and review both the original topic and any additional topics you dont remember in
the math review problem. On the last pass, write a short (two paragraph) essay on whether or not
you found multiple passes to be eective in helping you remember the content.
Note well: You may well have found the content boring on the third pass because it was so
familiar to you, but thats not a bad thing. If you learn physics so thoroughly that its laws become
boring, not because they confuse you and youd rather play World of Warcraft but because you know
them so well that reviewing them isnt adding anything to your understanding, well damn youll do
well on the exams testing the concept, wont you?
28 Preliminaries
II: Elementary Mechanics
29
Preliminaries 31
OK, so now you are ready to learn physics. Your math skills are bued and honed, youve
practiced the method of three passes, you understand that success depends on your full engagement
and a certain amount of hard work. In case you missed the previous section (or are unused to
actually reading a math-y textbook instead of minimally skimming it to extract just enough stu
to be able to do the homework) I usually review its content on the rst day of class at the same
time I review the syllabus and set down the class rules and grading scheme that I will use.
Its time to embark upon the actual week by week, day by day progress through the course
material. For maximal ease of use for you the student and (one hopes) your instructor whether or
not that instructor is me, the course is designed to cover one chapter per week-equivalent, whether or
not the chapter is broken up into a day and a half of lecture (summer school), an hour a day (MWF),
or an hour and a half a day (TTh) in a semester based scheme. To emphasize this preferred rhythm,
each chapter will be referred to by the week it would normally be covered in my own semester-long
course.
A weeks work in all cases covers just about exactly one topic in the course. A very few are
spread out over two weeks; one or two compress two related topics into one week, but in all cases
the homework is assigned on a weekly rhythm to give you ample opportunity to use the method of
three passes described in the rst part of the book, culminating in an expected 2-3 hour recitation
where you should go over the assigned homework in a group of three to six students, with a mentor
handy to help you where you get stuck, with a goal of getting all of the homework perfectly correct
by the end of recitation.
That is, at the end of a week plus its recitation, you should be able to do all of the weeks
homework, perfectly, and without looking or outside help. You will usually need all three passes, the
last one working in a group, plus the mentored recitation to achieve this degree of competence! But
without it, surely the entire process is a waste of time. Just nishing the homework is not enough,
the whole point of the homework is to help you learn the material and it is the latter that is the real
goal of the activity not the mere completion of a task.
However, if you do this attempt to really master the material you are almost certain to do
well on a quiz that terminates the recitation period, and you will be very likely to retain the material
and not have to cram it in again for the hour exams and/or nal exam later in the course. Once
you achieve understanding and reinforce it with a fair bit of repetition and practice, most students
will naturally transform this experience into remarkably deep and permanent learning.
Note well that each week is organized for maximal ease of learning with the week/chapter review
rst. Try to always look at this review before lecture even if you skip reading the chapter itself until
later, when you start your homework. Skimming the whole week/chapter guided by this summary
before lecture is, of course, better still. It is a rst pass that can often make lecture much easier
to follow and help free you from the tyranny of note-taking as you only need to note dierences in
the presentation from this text and perhaps the answers to questions that helped you understand
something during the discussion. Then read or skim it again right before each homework pass.
32 Week 1: Newtons Laws
Week 1: Newtons Laws
Summary
Physics is a language in particular the language of a certain kind of worldview. For philo-
sophically inclined students who wish to read more deeply on this, I include links to terms
that provide background for this point of view.
Wikipedia: http://www.wikipedia.org/wiki/Worldview
Wikipedia: http://www.wikipedia.org/wiki/Semantics
Wikipedia: http://www.wikipedia.org/wiki/Ontology
Mathematics is the natural language and logical language of physics, not for any particularly
deep reason but because it works. The components of the semantic language of physics are
thus generally expressed as mathematical or logical coordinates, and the semantic expressions
themselves are generally mathematical/algebraic laws.
Coordinates are the fundamental adjectival modiers corresponding to the dierentiating
properties of things (nouns) in the real Universe, where the term fundamental can also be
thought of as meaning irreducible adjectival properties that cannot be readily be expressed
in terms of or derived from other adjectival properties of a given object/thing. See:
Wikipedia: http://www.wikipedia.org/wiki/Coordinate System
Units. Physical coordinates are basically mathematical numbers with units (or can be so
considered even when they are discrete non-ordinal sets). In this class we will consistently
and universally use Standard International (SI) units unless otherwise noted. Initially, the
irreducible units we will need are:
a) meters the SI units of length
b) seconds the SI units of time
c) kilograms the SI units of mass
All other units for at least a short while will be expressed in terms of these three, for example
units of velocity will be meters per second, units of force will be kilogram-meters per second
squared. We will often give names to some of these combinations, such as the SI units of force:
1 Newton =
kg-m
sec
2
Later you will learn of other irreducible coordinates that describe elementary particles or ex-
tended macroscopic objects in physics such as electrical charge, as well as additional derivative
quantities such as energy, momentum, angular momentum, electrical current, and more.
33
Laws of Nature are essentially mathematical postulates that permit us to understand natural
phenomena and make predictions concerning the time evolution or static relations between the
coordinates associated with objects in nature that are consistent mathematical theorems of
the postulates. These predictions can then be compared to experimental observation and, if
they are consistent (uniformly successful) we increase our degree of belief in them. If they are
inconsistent with observations, we decrease our degree of belief in them, and seek alternative
or modied postulates that work better
23
.
The entire body of human scientic knowledge is the more or less successful outcome of this
process. This body is not xed indeed it is constantly changing because it is an adaptive
process, one that self-corrects whenever observation and prediction fail to correspond or when
new evidence spurs insight (sometimes revolutionary insight!)
Newtons Laws built on top of the analytic geometry of Descartes (as the basis for at least
the abstract spatial coordinates of things) are the dynamical principle that proved successful
at predicting the outcome of many, many everyday experiences and experiments as well as
cosmological observations in the late 1600s and early 1700s all the way up to the mid-19th
century
24
. When combined with associated empirical force laws they form the basis of the
physics you will learn in this course.
Newtons Laws:
a) Law of Inertia: Objects at rest or in uniform motion (at a constant velocity) in an
inertial reference frame remain so unless acted upon by an unbalanced (net) force. We
can write this algebraically
25
as
F
i
= 0 = ma = m
dv
dt
v = constant vector (1)
b) Law of Dynamics: The net force applied to an object is directly proportional to its
acceleration in an inertial reference frame. The constant of proportionality is called the
mass of the object. We write this algebraically as:
F =
F
i
= ma =
d(mv)
dt
=
d p
dt
(2)
where we introduce the momentum of a particle, p = mv, in the last way of writing it.
c) Law of Reaction: If object A exerts a force

F
AB
on object B along a line connecting the
two objects, then object B exerts an equal and opposite reaction force of

F
BA
=
F
AB
on object A. We write this algebraically as:
F
ij
=
F
ji
(3)
(or)
i,j
F
ij
= 0 (4)
(the latter form means that the sum of all internal forces between particles in any closed
system of particles cancel).
23
Students of philosophy or science who really want to read something cool and learn about the fundamental basis
of our knowledge of reality are encouraged to read e.g. Richard Coxs The Algebra of Probable Reason or E. T. Jaynes
book Probability Theory: The Logic of Science. These two related works quantify how science is not (as some might
think) absolute truth or certain knowledge, but rather the best set of things to believe based on our overall experience
of the world, that is to say, the evidence.
24
Although they failed in the late 19th and early 20th centuries, to be superceded by relativistic quantum mechanics.
Basically, everything we learn in this course is wrong, but it nevertheless works damn well to describe the world of
macroscopic, slowly moving objects of our everyday experience.
25
For students who are still feeling very shaky about their algebra and notation, let me remind you that
P
i
F
i
stands for The sum over i of all force

F
i
, or

F
1
+

F
2
+

F
3
+ .... We will often use
P
as shorthand for summing
over a list of similar objects or components or parts of a whole.
An inertial reference frame is a spatial coordinate system (or frame) that is either at rest or
moving at a constant speed, a non-accelerating set of coordinates that can be used to describe
the locations of real objects. In physics one has considerable leeway when it comes to choosing
the (inertial) coordinate frame to be used to solve a problem some lead to much simpler
solutions than others!
Forces of Nature (weakest to strongest):
a) Gravity
b) Weak Nuclear
c) Electromagnetic
d) Strong Nuclear
It is possible that there are more forces of nature waiting to be discovered. Because physics
is not a dogma, this presents no real problem. If they are, well simply give the discoverer a
Nobel Prize and add their name to the pantheon of great physicists, add the force to the
list above, and move on. Science, as noted, is self-correcting.
Force is a vector. For each force rule below we therefore need both a formula or rule for the
magnitude of the force (which we may have to compute in the solution to a problem in the
case of forces of constraint such as the normal force (see below) we will usually have to do
so) and a way of determining or specifying the direction of the force. Often this direction will
be obvious and in corresponence with experience and mere common sense strings pull, solid
surfaces push, gravity points down and not up. Other times it will be more complicated or
geometric and (along with the magnitude) may vary with position and time.
Force Rules The following set of force rules will be used both in this chapter and throughout
this course. All of these rules can be derived or understood (with some eort) from the forces
of nature, that is to say from elementary natural laws.
a) Gravity (near the surface of the earth):
F
g
= mg (5)
The direction of this force is down, so one could write this in vector form as

F
g
= mg y
in a coordinate system such that up is the +y direction. This rule follows from Newtons
Law of Gravitation, the elementary law of nature in the list above, evaluated near the
surface of the earth where it is approximately constant.
b) The Spring (Hookes Law) in one dimension:
F
x
= kx (6)
This force is directed back to the equilibrium point of unstretched spring, in the opposite
direction to x, the displacement of the mass on the spring from equilibrium. This rule
arises from the primarily electrostatic forces holding the atoms or molecules of the spring
material together, which tend to linearly oppose small forces that pull them apart or push
them together (for reasons we will understand in some detail later).
c) The Normal Force:
F
= N (7)
This points perpendicular and away from solid surface, magnitude sucient to oppose
the force of contact whatever it might be! This is an example of a force of constraint
a force whose magnitude is determined by the constraint that one solid object cannot
generally interpenetrate another solid object, so that the solid surfaces exert whatever
force is needed to prevent it (up to the point where the solid property itself fails). The
physical basis is once again the electrostatic molecular forces holding the solid object
together, and microscopically the surface deforms, however slightly, more or less like a
spring.
d) Tension in an Acme (massless, unstretchable, unbreakable) string:
F
s
= T (8)
This force simply transmits an attractive force between two objects on opposite ends of
the string, in the directions of the taut string at the points of contact. It is another
constraint force with no xed value. Physically, the string is like a spring once again
it microscopically is made of bound atoms or molecules that pull ever so slightly apart
when the string is stretched until the restoring force balances the applied force.
e) Static Friction
f
s

s
N (9)
(directed opposite towards net force parallel to surface to contact). This is another force
of constraint, as large as it needs to be to keep the object in question travelling at the
same speed as the surface it is in contact with, up to the maximum value static friction
can exert before the object starts to slide. This force arises from mechanical interlocking
at the microscopic level plus the electrostatic molecular forces that hold the surfaces
themselves together.
f) Kinetic Friction
f
k
=
k
N (10)
(opposite to direction of relative sliding motion of surfaces and parallel to surface of
contact). This force does have a xed value when the right conditions (sliding) hold.
This force arises from the forming and breaking of microscopic adhesive bonds between
atoms on the surfaces plus some mechanical linkage between the small irregularities on
the surfaces.
g) Fluid Forces, Pressure: A uid in contact with a solid surface (or anything else) in
general exerts a force on that surface that is related to the pressure of the uid:
F
P
= PA (11)
which you should read as the force exerted by the uid on the surface is the pressure
in the uid times the area of the surface. If the pressure varies or the surface is curved
one may have to use calculus to add up a total force. In general the direction of the force
exerted is perpendicular to the surface. An object at rest in a uid often has balanced
forces due to pressure. The force arises from the molecules in the uid literally bouncing
o of the surface of the object, transferring momentum (and exerting an average force)
as they do so. We will study this in some detail and will even derive a kinetic model for
a gas that is in good agreement with real gases.
h) Drag Forces:
F
d
= bv
n
(12)
(directed opposite to relative velocity of motion through uid, n usually between 1 (low
velocity) and 2 (high velocity). This force also has a determined value, although one
that depends in detail on the motion of the object. It arises rst because the surface of
an object moving through a uid is literally bouncing uid particles o in the leading
direction while moving away from particles in the trailing direction, so that there is a
dierential pressure on the two surfaces.
The rst week summary would not be complete without some sort of reference to methodologies
of problem solving using Newtons Laws and the force laws or rules above. The following rubric
should be of great use to you as you go about solving any of the problems you will encounter in this
course, although we will modify it slightly when we treat e.g. energy instead of force, torque instead
of force, and so on.
Dynamical Recipe for Newtons Second Law
a) Draw a good picture of what is going on. In general you should probably do this even if one
has been provided for you visualization is key to success in physics.
b) On your drawing (or on a second one) decorate the objects with all of the forces that act on
them, creating a free body diagram for the forces on each object.
c) Write Newtons Second Law for each object (summing the forces and setting the result to
m
i
a
i
for each ith object) and algebraically rearrange it into (vector) dierential equations
of motion (practically speaking, this means solving for or isolating the acceleration a
i
=
d
2
x
i
dt
2
of the particles in the equations of motion).
d) Decompose the 1, 2 or 3 dimensional equations of motion for each object into a set of inde-
pendent 1 dimensional equations of motion for each of the orthogonal coordinates by choosing
a suitable coordinate system (which may not be cartesian, for some problems) and using
trig/geometry. Note that a coordinate here may even wrap around a corner following a
string, for example or we can use a dierent coordinate system for each particle, as long as
we have a known relation between the coordinate systems.
e) Solve the independent 1 dimensional systems for each of the independent orthogonal coor-
dinates chosen, plus any coordinate system constraints or relations. In many problems the
constraints will eliminate one or more degrees of freedom from consideration. Note that in
most nontrivial cases, these solutions will have to be simultaneous solutions, obtained by e.g.
algebraic substitution or elimination.
f) Reconstruct the multidimensional trajectory by adding the vectors components thus obtained
back up (for a common independent variable, time).
g) Answer algebraically any questions requested concerning the resultant trajectory.
Some parts of this rubric will require experience and common sense to implement correctly for
any given kind of problem. That is why homework is so critically important! We want to make
solving the problems (and the conceptual understanding of the underlying physics) easy, and they
will only get to be easy with practice followed by a certain amount of meditation and reection,
practice followed by reection, iterate until the light dawns...
1.1: Introduction: A Bit of History and Philosophy
It has been remarked by at least one of my colleagues that one reason we have such a hard time
teaching Newtonian physics to college students is that we have to rst unteach them their already
prevailing natural worldview of physics, which dates all the way back to Aristotle.
In a nutshell and in very general terms (skipping all the nature is a source or cause of being moved
and of being at rest as primary attributes, see Aristotles Physica, book II) Aristotle considered
motion or the lack thereof of an object to be innate properties of materials, according to their
proportion of the big four basic elements: Earth, Air, Fire and Water. He extended the idea of the
moving and the immovable to cosmology and to his Metaphysics as well.
In this primitive view of things, the observation that (most) physical objects (being Earth) set
in motion slow down is translated into the notion that their natural state is to be at rest, and that
one has to add something from one of the other essences to produce a state of uniform motion. This
was not an unreasonable hypothesis; a great deal of a persons everyday experience (then and now)
is consistent with this. When we pick something up and throw it, it moves for a time and bounces,
rolls, slides to a halt. We need to press down on the accelerator of a car to keep it going, adding
something from the re burning in the motor to the earth of the body of the car. Even our
selves seem to run on something that goes away when we die.
Unfortunately, it is completely and totally wrong. Indeed, it is almost precisely Newtons rst
law stated backwards. It is very likely that the reason Newton wrote down his rst law (which is
otherwise a trivial consequence of his second law) is to directly confront the error of Aristotle, to
force the philosophers of his day to confront the fact that his (Newtons) theory of physics was
irreconcilable with that of Aristotle, and that (since his actually worked to make precise predictions
of nearly any kind of classical motion that were in good agreement with observation and experiments
designed to test it) Aristotles physics was almost certainly wrong.
Newtons discoveries were a core component of the Enlightment, a period of a few hundred years
in which Europe went from a state of almost slavish, church-endorsed belief in the infallibility and
correctness of the Aristotelian worldview to a state where humans, for the rst time in history,
let nature speak for itself by using a consistent framework to listen to what nature had to say
26
.
Aristotle lost, but his ideas are slow to die because they closely parallel everyday experience. The
rst chore for any serious student of physics is thus to unlearn this Aristotelian view of things
27
.
This is not, unfortunately, an abstract problem. It is very concrete and very current. Because I
have an online physics textbook, and because physics is in some very fundamental sense the magic
that makes the world work, I not infrequently am contacted by individuals who do not understand
the material covered in this textbook, who do not want to do the very hard work required to master
it, but who still want to be magicians. So they invent their own version of the magic, usually
altering the mathematically precise meanings of things like force, work, energy to be something
else altogether that they think that they understand but that, when examined closely, usually are
dimensionally or conceptually inconsistent and mean nothing at all.
Usually their new physics is in fact a reversion to the physics of Aristotle. They recreate the
magic of earth and air, re and water, a magic where things slow down unless re (energy) is added
to sustain their motion or where it can be extracted from invisible an inexhaustible resources, a world
26
Students who like to read historical ction will doubtless enjoy Neal Stephensons Baroque Cycle, a set of novels
lled with sex and violence and humor, a good read that spans the Enlightenment and in which Newton, Liebnitz,
Hooke and other luminaries to whom we owe our modern conceptualization of physics all play active parts.
27
This is not the last chore, by the way. Physicists have long since turned time into a coordinate just like space so
that how long things take depends on ones point of view, eliminated the assumption that one can measure any set
of measureable quantities to arbitrary precision in an arbitrary order, replaced the determinism of mathematically
precise trajectories with a funny kind of stochastic quasi-determinism, made (some) forces into just an aspect of
geometry, and demonstrated a degree of mathematical structure (still incomplete, were working on it) beyond the
wildest dreams of Aristotle or his mathematical-mystic buddies, the Pythagoreans.
where the mathematical relations between work and energy and force and acceleration do not hold.
A world, in short, that violates a huge, vast, truly stupdendous body of accumulated experimental
evidence including the very evidence that you yourselves will very likely observe in person in the
physics labs associated with this course. A world in which things like perpetual motion machines
are possible, where free lunches abound, and where humble dilettantes can be crowned the next
Einstein without having a solid understanding of algebra, geometry, advanced calculus, or the
physics that everybody else seems to understand perfectly.
This world does not exist. Seriously, it is a fantasy, and a very dangerous one, one that threatens
modern civilization itself. One of the most important reasons you are taking this course, whatever
your long term dreams and aspirations are professionally, is to come to fully and deeply understand
this. You will come to understand the magic of science, at the same time you learn to reject the
notion that science is magic or vice versa.
There is nothing wrong with this. I personally nd it very comforting that the individuals
that take care of my body (physicians) and who design things like jet airplanes and automobiles
(engineers) share a common and consistent Newtonian
28
view of just how things work, and would
nd it very disturbing if any of them believed in magic, in gods, in fairies, in earth, air, re and
water as constituent elements, in crystal energies, in the power of a drawn pentagram or ritually
chanted words in any context whatsoever. These all represent a sort of willful wishful thinking on
the part of the believer, a desire for things to not follow the rigorous mathematical rules that they
appear to follow as they evolve in time, for there to be a man behind the curtain making things
work out as they appear to do. Or sometimes an entire pantheon.
Let me be therefore be precise. In the physics we will study week by week below, the natural state
of things (e.g. objects made of matter) will be to move uniformly. We will learn non-Aristotelian
physics, Newtonian physics. It is only when things are acted on from outside by unbalanced forces
that the motion becomes non-uniform; they will speed up or slow down. By the time we are done,
you will understand how this can still lead to the damping of motion observed in everyday life, why
things do generally slow down. In the meantime, be aware of the problem and resist applying the
Aristotelian view to real physics problems, and consider, based on the evidence and your experiences
taking this course rejecting magic as an acceptable component of your personal worldview unless
and until it too has some sort of objective empirical support. Which would, of course, just make it
part of physics!
1.2: Dynamics
Physics is the study of dynamics. Dynamics is the description of the actual forces of nature that, we
believe, underlie the causal structure of the Universe and are responsible for its evolution in time.
We are about to embark upon the intensive study of a simple description of nature that introduces
the concept of a force, due to Isaac Newton. A force is considered to be the causal agent that
produces the eect of acceleration in any massive object, altering its dynamic state of motion.
Newton was not the rst person to attempt to describe the underlying nature of causality. Many,
many others, including my favorite dumb philosopher, Aristotle, had attempted this. The major
dierence between Newtons attempt and previous ones is that Newton did not frame his as a
philosophical postulate per se. Instead he formulated it as a mathematical theory and proposed a
set of laws that (he hoped) precisely described the regularities of motion in nature.
In physics a law is the equivalent of a postulated axiom in mathematics. That is, a physical
law is, like an axiom, an assumption about how nature operates that not formally provable by any
28
Newtonian or better, that is. Of course actual modern physics is non-Newtonian quantum mechanics, but this
is just as non-magical and concrete and it reduces to Newtonian physics in the macroscopic world of our quotidian
experience.
means, including experience, within the theory. A physical law is thus not considered correct
rather we ascribe to it a degree of belief based on how well and consistently it describes nature in
experiments designed to verify and falsify its correspondence.
It is important to do both. Again, interested students are are encouraged to look up Karl
Poppers Falsiability
29
and the older Postivism
30
. A hypothesis must successfully withstand
the test of repeated, reproducible experiments that both seek to disprove it and to verify that it has
predictive value in order to survive and become plausible. And even then, it could be wrong!
If a set of laws survive all the experimental tests we can think up and subject it to, we consider
it likely that it is a good approximation to the true laws of nature; if it passes many tests but
then fails others (often failing consistently at some length or time scale) then we may continue to
call the postulates laws (applicable within the appropriate milieu) but recognize that they are only
approximately true and that they are superceded by some more fundamental laws that are closer
(at least) to being the true laws of nature.
Newtons Laws, as it happens, are in this latter category early postulates of physics that worked
remarkably well up to a point (in a certain classical regime) and then failed. They are exact
(for all practical purposes) for massive, large objects moving slowly compared to the speed of light
31
for long times such as those we encounter in the everyday world of human experience (as described
by SI scale units). They fail badly (as a basis for prediction) for microscopic phenomena involving
short distances, small times and masses, for very strong forces, and for the laboratory description
of phenomena occurring at relativistic velocities. Nevertheless, even here they survive in a distorted
but still recognizable form, and the constructs they introduce to help us study dynamics still survive.
Interestingly, Newtons laws lead us to second order dierential equations, and even quantum
mechanics appears to be based on dierential equations of second order or less. Third order and
higher systems of dierential equations seem to have potential problems with temporal causality
(where eects always follow, or are at worst simultaneous with, their causes in time); it is part of
the genius of Newtons description that it precisely and suciently allows for a full description of
causal phenomena, even where the details of that causality turn out to be incorrect.
Incidentally, one of the other interesting features of Newtons Laws is that Newton invented
calculus to enable him to solve the problems they described. Now you know why calculus is so
essential to physics: physics was the original motivation behind the invention of calculus itself.
Calculus was also (more or less simultaneously) invented in the more useful and recognizable form
that we still use today by other mathematical-philosophers such as Leibnitz, and further developed
by many, many people such as Gauss, Poincare, Poisson, Laplace and others. In the overwhelming
majority of cases, especially in the early days, solving one or more problems in the physics that
was still being invented was the motivation behind the most signicant developments in calculus
and dierential equation theory. This trend continues today, with physics providing an underlying
structure and motivation for the development of much of the most advanced mathematics.
29
Wikipedia: http://www.wikipedia.org/wiki/Falsiability. Popper considered the ability to in principle disprove
a hypothesis as an essential criterion for it to have objective meaning. Students might want to purchase and read
Nassim Nicholas Talebs book The Black Swan to learn of the dangers and seductions of worldview-building gone
awry due to insucient skepticism or a failure to allow for the disproportionate impact of the unexpected but true
anyway such as an experiment that falsies a conclusion that was formerly accepted as being veried.
30
Wikipedia: http://www.wikipedia.org/wiki/Positivism. This is the correct name for veriability, or the ability
to verify a theory as the essential criterion for it to have objective meaning. The correct modern approach in physics
is to do both, following the procedure laid out by Richard Cox and E. T. Jaynes wherein propositions are never proven
or disproven per se, but rather are shown to be more or less plausible. A hypothesis in this approach can have
meaning as a very implausible notion quite independent of whether or not it can be veried or falsied yet.
31
c = 3 10
8
meters/second
1.3: Coordinates
Think about any thing, any entity that objectively exists in the real, visible, Universe. What denes
the object and dierentiates it from all of the other things that make up the Universe? Before we
can talk about how the Universe and its contents change in time, we have to talk about how to
describe its contents (and time itself) at all.
As I type this Im looking over at just such a thing across the room from me, an object that I
truly believe exists in the real Universe. To help you understand this object, I have to use language.
I might tell you how large it is, what its weight is, what it looks like, where it is, how long it has
been there, what it is for, and of course I have to use words to do this, not just nouns but a few
adjectival modiers, and speak of an empty beer glass sitting on a table in my den just to my side,
where now I have only to tell you just where my den is, where the table is in the den, and perhaps
dierentiate this particular beer glass from other beer glasses you might have seen. Eventually, if I
use enough words, construct a detailed map, make careful measurements, perhaps include a picture,
I can convey to you a very precise mental picture of the beer glass, one suciently accurate that you
can visualize just where, when and what it is (or was).
Of course this prose description is not the glass itself ! If you like, the map is not the territory
32
!
That is, it is an informational representation of the glass, a collection of symbols with an agreed
upon meaning (where meaning in this context is a correspondence between the symbols and the
presumed general sensory experience of the glass that one would have if one looked at the glass from
my current point of view.
Constructing just such a map is the whole point of physics, only the map is not just of mundane
objects such as a glass; it is the map of the whole world, the whole Universe. To the extent that
this worldview is successful, especially in a predictive sense and not just hindsight, the physical map
in your mind works well to predict the Universe you perceive through your sensory apparatus. A
perfect understanding of physics (and a knowledge of certain data) is equivalent to a possessing a
perfect map, one that precisely locates every thing within the Universe for all possible times.
Maps require several things. It is convenient, but not necessary, to have a set of single term
descriptors, symbols for various things in the world the map is supposed to describe. So this
symbol might stand for a house, that one for a bridge, still another one for a street or railroad
crossing. Another absolutely essential part of a map is the actual coordinates of things that it is
describing. The coordinate representation of objects drawn in on the map is supposed to exist in an
accurate one-to-one but abstract correspondence with the concrete territory in the real world where
the things represented by the symbols actually exist and move about
33
.
Of course the symbols such as the term beer glass can themselves be abstractly modeled
as points in some sort of space; Complex or composite objects with simple coordinates can be
represented as a collection of far more coordinates for the smaller objects that make up the composite
object. Ultimately one arrives at elementary objects, objects that are not (as far as we know or
can tell so far) made up of other objects at all. The various kinds of elementary objects, the list
of their variable properties, and their spatial and temporal coordinates are in some deep sense all
coordinates, and every object in the universe can be thought of as a point in or volume of this
enormous and highly complex coordinate space!
In this sense coordinates are the fundamental adjectival modiers corresponding to the dier-
entiating properties of named things (nouns) in the real Universe, where the term fundamental
32
This is an adage of a eld called General Semantics and is something to keep carefully in mind while studying
physics. Not even my direct perception of the glass is the glass itself; it is just a more complex and dynamical kind
of map.
33
Of course in the old days most actual maps were stationary, and one had to work hard to see time on them, but
nowadays nearly everybody has or at least has seen GPS maps and video games, where things or the map coordinates
themselves move.
can also be thought of as meaning elementary or irreducible adjectival properties that cannot be
readily be expressed in terms of or derived from other adjectival properties of a given object/thing.
Physical coordinates are, then, basically mathematical numbers with units (and can be so con-
sidered even when they are discrete non-ordinal sets). At rst we will omit most of the details from
the objects we study to keep things simple. In fact, we will spend most of the rst part of the course
interested in only three quantities that set the scale for the coordinate system we need to describe
the classical physics of a rather generic particle: space (where it is), time (when it is there), and
mass (an intrinsic property).
This is our rst idealization the treatment of an extended (composite) object as if it were
itself an elementary object. This is called the particle approximation, and later we will justify this
approximation ex post facto (after the fact) by showing that there really is a special point in a
collective system of particles that behaves like a particle as far as Newtons Laws are concerned.
For the time being, then, objects such as porpoises, puppies, and ponies are all idealized and will
be treated as particles
34
. Well talk more about particles in a page or two.
We need units to describe intervals or values in all three coordinates so that we can talk or think
about those particles (idealized objects) in ways that dont depend on the listener. In this class
we will consistently and universally use Standard International (SI) units unless otherwise noted.
Initially, the irreducible units we will need are:
a) meters the SI units of length
b) seconds the SI units of time
c) kilograms the SI units of mass
All other units for at least a short while will be expressed in terms of these three.
For example units of velocity will be meters per second, units of force will be kilogram-meters
per second squared. We will often give names to some of these combinations, such as the SI units
of force:
1 Newton =
kg-m
sec
2
Later you may learn of other irreducible coordinates that describe elementary particles or ex-
tended macroscopic objects in physics such as electrical charge, as well as additional derivative
quantities such as energy, momentum, angular momentum, electrical current, and more.
As for what the quantities that these units represent are well, thats a tough question to answer.
I know how to measure distances between points in space and times between events that occur in
space, using things like meter sticks and stopwatches, but as to just what the space and time in
which these events are embedded really is Im as clueless as a cave-man. Its probably best to just
dene distance as that which we might measure with a meter stick or other standard of length,
time as that which we might measure with a clock or other standard of time, and mass that which
we might measure compared to some standard of mass using methods well have to gure out
below. Existential properties cannot really be dened, only observed, quantied, and understood
in the context of a complete, consistent system, the physical worldview, the map we construct that
works to establish a useful semantic representation of that which we observe.
Sorry if thats dicult to grasp, but there it is. Its just as dicult for me (after most of a lifetime
studying physics) as it is for you right now. Dictionaries are, after all, written in words that are in
34
I teach physics in the summers at the Duke Marine Lab, where there are porpoises and wild ponies visible from
the windows of our classroom. Puppies I threw in for free because they are cute and also begin with p. However,
you can think of a particle as a baseball or bullet or ball bearing if you prefer less cute things that begin with the
letter b, which is a symmetry transformed p, sort of.
the dictionaries and hence are self-referential and in some deep sense should be abstract, arbitrary,
meaningless yet somehow we learn to speak and understand them. So it is, so it will be for you,
with physics, and the process takes some time.
x(t)
x(t+ t)
x
x
y
m
x(t)
y(t)
Figure 2: Coordinatized visualization of the motion of a particle of mass m along a trajectory x(t).
Note that in a short time t the particles position changes from x(t) to x(t + t).
Coordinates are enormously powerful ideas, the very essence of mapmaking and knowledge itself.
To assist us in working with them, we introduce the notion of coordinate frame a system of all
of the relevant coordinates that describe at least the position of a particle (in one, two or three
dimensions, usually). In gure 2 is a picture of a simple single particle with mass m (that might
represent my car) on a set of coordinates that describes at least part of the actual space where my
car is sitting. The solid line on this gure represents the trajectory of my car as it moves about.
Armed with a watch, an apparatus for measuring mass, meter sticks and some imagination, one can
imagine a virtual car rolling up or down along its virtual trajectory and compare its motion in our
conceptual map
35
with the correspondent happenings in the world outside of our minds where the
real car moves along a real track.
Note well that we idealize my car by treating the whole thing as a single object with a single
position (located somewhere in the middle) when we know that it is really made up steering wheels
and bucket seats that are objects in their own right that are further assembled into a car All
of these wheels and panels, nuts and bolts are made up of still smaller objects molecules and
molecules are made up of atoms, and atoms are made of protons and neutrons and electrons, and
protons and neutrons are made up of quarks, and we dont really know for certain if electrons and
quarks are truly elementary particles or are themselves composite objects
36
. Later in this semester
we will formally justify our ability to do this, and we will improve on our description of things like
cars and wheels and solid composite objects by learning how they can move, rotate, and even explode
into little bits of car and still have some parts of their collective coordinate motion that behaves as
though the ex-car is still a single point-like object.
In the meantime, we will simply begin with this idealization and treat discrete solid objects as
particles masses that are at a single point in space at a single time. So we will treat objects such as
planets, porpoises, puppies, people, baseballs and blocks, cars and cannonballs and much more as if
they have a single mass and a single spatial location at any single instant in time as a particle. One
35
This map need not be paper, in other words I can sit here and visualize the entire drive from my house to
the grocery store, over time. Pictures of trajectories on paper are just ways we help our brains manage this sort of
understanding.
36
Although the currently accepted belief is that they are. However, it would take only one good, reproducible
experiment to make this belief less plausible, more probably false. Evidence talks, belief walks.
advantage of this is that the mathematical expressions for all of these quantities become functions
of time
37
and possibly other coordinates.
In physical dynamics, we will be concerned with nding the trajectory of particles or systems the
position of each particle in the system expressed as a function of time. We can write the trajectory
as a vector function on a spatial coordinate system (e.g. cartesian coordinates in 2 dimensions):
x(t) = x(t) x +y(t) y (13)
Note that x(t) stands for a vector from the origin to the particle, where x(t) by itself (no boldface
or vector sign) stands for the x-component of this vector. An example trajectory is visualized in
gure 2 (where as noted, it might stand for the trajectory of my car, treated as a particle). In all
of the problems we work on throughout the semester, visualization will be a key component of the
solution.
The human brain doesnt, actually, excel at being able to keep all of these details onboard in
your minds eye, the virtual visual eld of your imagination. Consequently, you must always
draw gures, usually with coordinates, forces, and other decorations, when you solve a physics
problem. The paper (or blackboard or whiteboard) then becomes an extension of your brain a
kind of scratch space that augments your visualization capabilities and your sequential symbolic
reasoning capabilities. To put it bluntly, you are more intelligent when you reason with a piece of
paper and pen than you are when you are forced to rely on your brain alone. To succeed in physics,
you need all of the intelligence you can get, and you need to synthesize solutions using both halves
of your brain, visualization and sequential reason. Paper and pen facilitate this process and one of
the most important lessons of this course is how to use them to attain the full benet of the added
intelligence they enable not just in physics problems, but everywhere else as well.
If we know the trajectory function of a particle, we know a lot of other things too. Since we
know where it is at any given time, we can easily tell how fast it is going in what direction. This
combination of the speed of the particle and its direction forms a vector called the velocity of the
particle. Speed, we all hopefully know from our experience in real life doing things like driving
cars, is a measure of how far you go in a certain amount of time, expressed in units of distance
(length) divided by time. Miles per hour. Furlongs per fortnight. Or, in a physics course, meters
per second
38
.
The average velocity of the particle is by denition the vector change in its position x in some
time t divided by that time:
v
av
=
x
t
(14)
Sometimes average velocity is useful, but often, even usually, it is not. It can be a rather poor
measure for how fast a particle is actually moving at any given time, especially if averaged over
times that are long enough for interesting changes in the motion to occur.
For example, I might get in my car and drive around a racetrack at speed of 50 meters per second
really booking it, tires squealing on the turns, smoke coming out of my engine (at least if I tried
this in my car, as it would likely explode if I tried to go 112 mph for any extended time), and screech
to a halt right back where I began. My average velocity is then zero Im back where I started!
That zero is a poor explanation for the heat waves pulsing out from under the hood of the car and
the wear on its tires.
More often we will be interested in the instantaneous velocity of the particle. This is basically
the average velocity, averaged over as small a time interval as possible one so short that it is just
37
Recall that a function is a quantity that depends on a set of argument(s) that is single-valued, that is, has a single
value for each unique value of its argument(s).
38
A good rule of thumb for people who have a practical experience of speeds in miles per hour trying to visualize
meters per second is that 1 meter per second is approximately equal to 2
1
4
miles per hour, hence four meters per
second is nine miles per hour. A cruder but still quite useful approximation is (meters per second) equals (miles per
hour/2).
long enough for the car to move at all. Calculus permits us to take this limit, and indeed uses just
this limit as the denition of the derivative. We thus dene the instantaneous velocity vector as the
time-derivative of the position vector:
v(t) = lim
t0
x(t + t) x(t)
t
= lim
t0
x
t
=
dx
dt
(15)
Sometimes we will care about how fast a car is going but not so much about the direction.
Speed is dened to be the magnitude of the velocity vector:
v(t) = |v(t)| (16)
We could say more about it, but Im guessing that you already have a pretty good intuitive feel for
speed if you drive a car and pay attention to how your speedometer reading corresponds to the way
things zip by or crawl by outside of your window.
The reason that average velocity is a poor measure is that (of course) our cars speed up and slow
down and change direction, often. Otherwise they tend to run into things, because it is usually not
possible to travel in perfectly straight lines at only one speed and drive to the grocery store. To see
how the velocity changes in time, we will need to consider the acceleration of a particle, or the rate
at which the velocity changes. As before, we can easily dene an average acceleration over a possibly
long time interval t as:
a
av
=
v(t + t) v(t)
t
=
v
t
(17)
Also as before, this average is usually a poor measure of the actual acceleration a particle (or
car) experiences. If I am on a straight track at rest and stamp on the accelerator, burning rubber
until I reach 50 meters per second (112 miles per hour) and then stamp on the brakes to quickly
skid to a halt, tires smoking and leaving black streaks on the pavement, my average acceleration is
once again zero, but there is only one brief interval (between taking my foot o of the accelerator
and before I pushed it down on the brake pedal) during the trip where my actual acceleration was
anything close to zero. Yet, my average acceleration is zero.
Things are just as bad if I go around a circular track at a constant speed! As we will shortly see,
in that case I am always accelerating towards the center of the circle, but my average acceleration
is systematically approaching zero as I go around the track more and more times.
From this we conclude that the acceleration that really matters is (again) the limit of the average
over very short times; the time derivative of the velocity. This limit is thus dened to be the
instantaneous accleration:
a(t) = lim
t0
v
t
=
dv
dt
=
d
2
x
dt
2
, (18)
the acceleration of the particle right now.
Obviously we could continue this process and dene the time derivative of the acceleration
39
and still higher order derivatives of the trajectory. However, we generally do not have to in physics
we will not need to continue this process. As it turns out, the dynamic principle that appears
sucient to describe pretty much all classical motion will involve force and acceleration, and pretty
much all of the math we do (at least at rst) will involve solving backwards from a knowledge of the
acceleration to a knowledge of the velocity and position vectors via integration or more generally
(later) solving the dierential equation of motion.
We are now prepared to formulate this dynamical principle Newtons Second Law. While were
at it, lets study his First and Third Laws too might as well collect the complete set...
39
A quantity that actually does have a name it is called the jerk but we wont need it.
1.4: Newtons Laws
The following are Newtons Laws as you will need to know them to both solve problems and answer
conceptual questions in this course. Note well that they are framed in terms of the spatial coordinates
dened in the previous section plus mass and time.
a) Law of Inertia: Objects at rest or in uniform motion (at a constant velocity) in an inertial
reference frame remain so unless acted upon by an unbalanced (net, total) force. We can write
this algebraically as:
F =
F
i
= 0 = ma = m
dv
dt
v = constant vector (19)
b) Law of Dynamics: The total force applied to an object is directly proportional to its accel-
eration in an inertial reference frame. The constant of proportionality is called the mass of
the object. We write this algebraically as:
F =
F
i
= ma =
d(mv)
dt
=
d p
dt
(20)
where we introduce the momentum of a particle, p = mv, in the last way of writing it.
c) Law of Reaction: If object A exerts a force

F
AB
on object B along a line connecting the
two objects, then object B exerts an equal and opposite reaction force of

F
BA
=
F
AB
on
object A. We write this algebraically as:
F
ij
=
F
ji
(21)
(or)
i,j
F
ij
= 0 (22)
where i and j are arbitrary particle labels. The latter form will be useful to us later; it means
that the sum of all internal forces between particles in any closed system of particles cancels!.
Note that these laws are not all independent as mathematics goes. The rst law is a clear and
direct consequence of the second. The third is not it is an independent statement. The rst law
historically, however, had an important purpose. It rejected the dynamics of Aristotle, introducing
the new idea of intertia where an object in motion continues in that motion unless acted upon by
some external agency. This is directly opposed to the Aristotelian view that things only moved when
acted on by an external agency and that they naturally came to rest when that agency was removed.
The second law is our basic dynamical principle. It tells one how to go from a problem description
(in words) plus a knowledge of the force laws of nature to an equation of motion (typically a
statement of Newtons second law). The equation of motion, generally solved for the acceleration,
becomes a kinematical equation from which we can develop a full knowledge of the solution using
mathematics guided by our experience and physical intuition.
The third law leads (as we shall see) to the surprising result that systems of particles behave
collectively like a particle! This is indeed fortunate! We know that something like a baseball is really
made up of a lot of teensy particles itself, and yet it obeys Newtons Second law as if it is a particle.
We will use the third law to derive this and the closely related Law of Conservation of Momentum
in a later week of the course.
An inertial reference frame is a coordinate system (or frame) that is either at rest or moving
at a constant speed, a non-accelerating frame of reference. For example, the ground, or lab frame,
is a coordinate system at rest relative to the approximately non-accelerating ground or lab and
is considered to be an inertial frame to a good approximation. A (coordinate system inside a) car
travelling at a constant speed relative to the ground, a spaceship coasting in a region free from elds, a
railroad car rolling on straight tracks at constant speed are also inertial frames. A (coordinate system
inside a) car that is accelerating (say by going around a curve), a spaceship that is accelerating, a
freight car that is speeding up or slowing down these are all examples of non-inertial frames. All
of Newtons laws suppose an inertial reference frame (yes, the third law too) and are generally false
for accelerations evaluated in an accelerating frame as we will prove and discuss next week.
In the meantime, please be sure to learn the statements of the laws including the condition in
an inertial reference frame, in spite of the fact that you dont yet really understand what this means
and why we include it. Eventually, it will be the other important meaning and use of Newtons First
Law it is the law that denes an inertial reference frame as any frame where an object remains in
a state of uniform motion if no forces act on it!
Youll be glad that you did.
1.5: Forces
Classical dynamics at this level, in a nutshell, is very simple. Find the total force on an object.
Use Newtons second law to obtain its acceleration (as a dierential equation of motion). Solve the
equation of motion by direct integration or otherwise for the position and velocity.
Thats it!
Well, except for answering those pesky questions that we typically ask in a physics problem, but
well get to that later. For the moment, the next most important problem is: how do we evaluate
the total force?
To answer it, we need a knowledge of the forces at our disposal, the force laws and rules that
we are likely to encounter in our everyday experience of the world. Some of these forces are funda-
mental forces elementary forces that we call laws of nature because the forces themselves arent
caused by some other force, they are themselves the actual causes of dynamical action in the visible
Universe. Other force laws arent quite so fundamental they are more like approximate rules
and arent exactly correct. They are also usually derivable from (or at least understandable from)
the elementary natural laws, although it may be quite a lot of work to do so.
We quickly review the forces we will be working with in the rst part of the course, both the
forces of nature and the force rules that apply to our everyday existence in approximate form.
1.5.1: The Forces of Nature
At this point in your life, you almost certainly know that all normal matter of your everyday
experience is made up of atoms. Most of you also know that an atom itself is made up of a positively
charged atomic nucleus that is very tiny indeed surrounded by a cloud of negatively charged electrons
that are much lighter. Atoms in turn bond together to make molecules, atoms or molecules in turn
bind together (or not) to form gases, liquids, solids things, including those macroscopic things
that we are so far treating as particles.
The actual elementary particles from which they are made are much tinier than atoms. It is worth
providing a greatly simplied table of the stu from which normal atoms (and hence molecules,
and hence we ourselves) are made:
In this table, up and down quarks and electrons are so-called elementary particles things that
are not made up of something else but are fundamental components of nature. Quarks bond together
three at a time to form nucleons a proton is made up of up-up-down quarks and has a charge
of +e, where e is the elementary electric charge. A neutron is made up of up-down-down and has
Particle Location Size
Up or Down Quark Nucleon (Proton or Neutron) pointlike
Proton Nucleus 10
15
meters
Neutron Nucleus 10
15
meters
Nucleus Atom 10
15
meters
Electron Atom pointlike
Atom Molecules or Objects 10
10
meters
Molecule Objects > 10
10
meters
Table 1: Basic building blocks of normal matter as of 2011, subject to change as we discover and
understand more about the Universe, ignoring pesky things like neutrinos, photons, gluons, heavy
vector bosons, heavier leptons that physics majors (at least) will have to learn about later...
no charge.
Neutrons and protons, in turn, bond together to make an atomic nucleus. The simplest atomic
nucleus is the hydrogen nucleus, which can be as small as a single proton, or can be a proton bound
to one neutron (deuterium) or two neutrons (tritium). No matter how many protons and neutrons
are bound together, the atomic nucleus is small order of 10
15
meters in diameter
40
. The quarks,
protons and neutrons are bound together by means of a force of nature called the strong nuclear
interaction, which is the strongest force we know of relative to the mass of the interacting particles.
The positive nucleus combines with electrons (which are negatively charged and around 2000
times lighter than a proton) to form an atom. The force responsible for this binding is the electro-
magnetic force, another force of nature (although in truth nearly all of the interaction is electrostatic
in nature, just one part of the overall electromagnetic interaction).
The light electrons repel one another electrostatically almost as strongly as they are attracted
to the nucleus that anchors them. They also obey the Pauli exclusion principle which causes them
to avoid one anothers company. These things together cause atoms to be much larger than a
nucleus, and to have interesting structure that gives rise to chemistry and molecular bonding and
(eventually) life.
Inside the nucleus (and its nucleons) there is another force that acts at very short range. This
force can cause e.g. neutrons to give o an electron and turn into a proton or other strange things
like that. This kind of event changes the atomic number of the atom in question and is usually
accompanied by nuclear radiation. We call this force the weak nuclear force. The two nuclear forces
thus both exist only at very short length scales, basically in the quantum regime inside an atomic
nucleus, where we cannot easily see them using the kinds of things well talk about this semester.
For our purposes it is enough that they exist and bind stable nuclei together so that those nuclei in
turn can form atoms, molecules, objects, us.
Our picture of normal matter, then, is that it is made up of atoms that may or may not be
bonded together into molecules, with three forces all signicantly contributing to what goes on
inside a nucleus and only one that is predominantly relevant to the electronic structure of the atoms
themselves.
There is, however, a fourth force (that we know of there may be more still, but four is all
that weve been able to positively identify and understand). That force is gravity. Gravity is a bit
odd. It is a very long range, but very weak force by far the weakest force of the four forces of
nature. It only is signcant when one builds planet or star sized objects, where it can do anything
from simply bind an atmosphere to a planet and cause moons and satellites to go around it in nice
orbits to bring about the catastrophic collapse of a dying star. The physical law for gravitation will
40
...with the possible exception of neutrons bound together by gravity to form neutron stars. Those can be thought
of, very crudely, as very large nuclei.
be studied over an entire week of work later in the course. I put it down now just for completeness,
but initially well focus on the force rules in the following section.
F
21
=
Gm
1
m
2
r
2
12
r
12
(23)
Dont worry too much about what all of these symbols mean and what the value of G is well get
to all of that but not now.
Since we live on the surface of a planet, to us gravity will be an important force, but the forces
we experience every day and we ourselves are primarily electromagnetic phenomena, with a bit of
help from quantum mechanics to give all that electromagnetic stu just the right structure.
Lets summarize this in a short table of forces of nature, strongest to weakest:
a) Strong Nuclear
b) Electromagnetic
c) Weak Nuclear
d) Gravity
Note well: It is possible that there are more forces of nature waiting to be discovered. Because
physics is not a dogma, this presents no real problem. If a new force of nature (or radically dierent
way to view the ones weve got) emerges as being consistent with observation and predictive, and
hence possibly/plausibly true and correct, well simply give the discoverer a Nobel Prize, add their
name to the pantheon of great physicists, add the force itself to the list above, and move on.
Science, as noted above, is a self-correcting system of reasoning, at least when it is done right.
1.5.2: Force Rules
The following set of force rules will be used both in this chapter and throughout this course. All of
these rules can be derived or understood (with some eort) from the forces of nature, that is to say
from elementary natural laws, but are not quite laws themselves.
a) Gravity (near the surface of the earth):
F
g
= mg (24)
The direction of this force is down, so one could write this in vector form as

F
g
= mg y in
a coordinate system such that up is the +y direction. This rule follows from Newtons Law
of Gravitation, the elementary law of nature in the list above, evaluated near the surface
of the earth where it is varies only very slowly with height above the surface (and hence is
constant) as long as that height is small compared to the radius of the Earth.
The measured value of g (the gravitational constant or gravitational eld close to the Earths
surface) thus isnt really constant it actually varies weakly with latitude and height and the
local density of the earth immediately under your feet and is pretty complicated
41
. Some
constant, eh?
Most physics books (and the wikipedia page I just linked) give gs value as something like:
g 9.81
meters
second
2
(25)
41
Wikipedia: http://www.wikipedia.org/wiki/Gravity of Earth. There is a very cool rotating earth graphic on
this page that shows the eld variation in a color map. This page goes into much more detail than I will about the
causes of variation of apparent gravity.
(which is sort of an average of the variation) but in this class to the extent that we do arithmetic
with it well just use
g 10
meters
second
2
(26)
because hey, so it makes a 2% error. Thats not very big, really you will be lucky to measure
g in your labs to within 2%, and it is so much easier to multiply or divide by 10 than 9.80665.
b) The Spring (Hookes Law) in one dimension:
F
x
= kx (27)
This force is directed back to the equilibrium point (the end of the unstretched spring where
the mass is attached) in the opposite direction to x, the displacement of the mass on the
spring away from this equilibrium position. This rule arises from the primarily electrostatic
forces holding the atoms or molecules of the spring material together, which tend to linearly
oppose small forces that pull them apart or push them together (for reasons we will understand
in some detail later).
c) The Normal Force:
F
= N (28)
This points perpendicular and away from solid surface, magnitude sucient to oppose the force
of contact whatever it might be! This is an example of a force of constraint a force whose
magnitude is determined by the constraint that one solid object cannot generally interpenetrate
another solid object, so that the solid surfaces exert whatever force is needed to prevent it
(up to the point where the solid property itself fails). The physical basis is once again the
electrostatic molecular forces holding the solid object together, and microscopically the surface
deforms, however slightly, more or less like a spring to create the force.
d) Tension in an Acme (massless, unstretchable, unbreakable) string:
F
s
= T (29)
This force simply transmits an attractive force between two objects on opposite ends of the
string, in the directions of the taut string at the points of contact. It is another constraint force
with no xed value. Physically, the string is like a spring once again it microscopically is
made of bound atoms or molecules that pull ever so slightly apart when the string is stretched
until the restoring force balances the applied force.
e) Static Friction
f
s

s
N (30)
(directed opposite towards net force parallel to surface to contact). This is another force of
constraint, as large as it needs to be to keep the object in question travelling at the same speed
as the surface it is in contact with, up to the maximum value static friction can exert before
the object starts to slide. This force arises from mechanical interlocking at the microscopic
level plus the electrostatic molecular forces that hold the surfaces themselves together.
f) Kinetic Friction
f
k
=
k
N (31)
(opposite to direction of relative sliding motion of surfaces and parallel to surface of contact).
This force does have a xed value when the right conditions (sliding) hold. This force arises
from the forming and breaking of microscopic adhesive bonds between atoms on the surfaces
plus some mechanical linkage between the small irregularities on the surfaces.
g) Fluid Forces, Pressure: A uid in contact with a solid surface (or anything else) in general
exerts a force on that surface that is related to the pressure of the uid:
F
P
= PA (32)
which you should read as the force exerted by the uid on the surface is the pressure in the
uid times the area of the surface. If the pressure varies or the surface is curved one may
have to use calculus to add up a total force. In general the direction of the force exerted is
perpendicular to the surface. An object at rest in a uid often has balanced forces due to
pressure. The force arises from the molecules in the uid literally bouncing o of the surface
of the object, transferring momentum (and exerting an average force) as they do so. We
will study this in some detail and will even derive a kinetic model for a gas that is in good
agreement with real gases.
h) Drag Forces:
F
d
= bv
n
(33)
(directed opposite to relative velocity of motion through uid, n usually between 1 (low veloc-
ity) and 2 (high velocity). It arises in part because the surface of an object moving through
a uid is literally bouncing uid particles o in the leading direction while moving away from
particles in the trailing direction, so that there is a dierential pressure on the two surfaces,
in part from kinetic friction that exerts a force component parallel to a surface in relative
motion to the uid. It is really pretty complicated so complicated that we can only write
down a specic, computable expression for it for very simple geometries and situations. Still,
it is a very important and ubiquitous force and well try to gain some appreciation for it along
the way.
1.6: Force Balance Static Equilibrium
Before we start using dynamics at all, let us consider what happens when all of the forces acting on
an object balance. That is, there are several non-zero (vector) forces acting on an object, but those
forces sum up to zero force. In this case, Newtons First Law becomes very useful. It tells us that
the object in question will remain at rest if it is initially at rest. We call this situation where the
forces are all balanced static force equilibrium:
F
tot
=
F
i
= ma = 0 (34)
This works both ways; if an object is at rest and stays that way, we can be certain that the forces
acting on it balance!
We will spend some time later studying static equilibrium in general once we have learned about
both forces and torques, but for the moment we will just consider a single example of what is after
all a pretty simple idea. This will also serve as a short introduction to one of the forces listed above,
Hookes Law for the force exerted by a spring on an attached mass.
Example 1.6.1: Spring and Mass in Static Force Equilibrium
Suppose we have a mass m hanging on a spring with spring constant k such that the spring is
stretched out some distance x from its unstretched length. This situation is pictured in gure 3.
We will learn how to really solve this as a dynamics problem later indeed, well spend an entire
week on it! Right now we will just write down Newtons laws for this problem so we can nd a. Let
the x direction be up. Then (using Hookes Law from the list above):
x
m
Figure 3: A mass m hangs on a spring with spring constant k. We would like to compute the amount
x by which the string is stretched when the mass is at rest in static force equilibrium.
F
x
= k(x x
0
) mg = ma
x
(35)
or (with x = x x
0
, so that x is negative as shown)
a
x
=
k
m
x g (36)
Note that this result doesnt depend on where the origin of the x-axis is, because x and x
0
both
change by the same amount as we move it around. In most cases, we will nd the equilibrium
position of a mass on a spring to be the most convenient place to put the origin, because then x and
x are the same!
In static equilibrium, a
x
= 0 (and hence, F
x
= 0) and we can solve for x:
a
x
=
k
m
x g = 0
k
m
x = g
x =
mg
k
(37)
You will see this result appear in several problems and examples later on, so bear it in mind.
1.7: Simple Motion in One Dimension
Finally! All of that preliminary stu is done with. If you actually read and studied the chapter up
to this point (many of you will not have done so, and youll be SORRReeee...) you should:
a) Know Newtons Laws well enough to recite them on a quiz yes, I usually just put a question
like What are Newtons Laws on quizzes just to see who can recite them perfectly, a really
useful thing to be able to do given that were going to use them hundreds of times in the next
12 weeks of class, next semester, and beyond; and
b) Have at least started to commit the various force rules well use this semester to memory.
I dont generally encourage rote memorization in this class, but for a few things, usually very
fundamental things, it can help. So if you havent done this, go spend a few minutes working on
this before starting the next section.
All done? Well all rightie then, lets see if we can actually use Newtons Laws (usually Newtons
Second Law, our dynamical principle) and force rules to solve problems. We will start out very gently,
trying to understand motion in one dimension (where we will not at rst need multiple coordinate
dimensions or systems or trig or much of the other stu that will complicate life later) and then,
well, well complicate life later and try to understand what happens in 2+ dimensions.
Heres the basic structure of a physics problem. You are given a physical description of the
problem. A mass m at rest is dropped from a height H above the ground at time t = 0; what
happens to the mass as a function of time? From this description you must visualize whats going
on (sometimes but not always aided by a gure that has been drawn for you representing it in
some way). You must select a coordinate system to use to describe what happens. You must write
Newtons Second Law in the coordinate system for all masses, being sure to include all forces or force
rules that contribute to its motion. You must solve Newtons Second Law to nd the accelerations
of all the masses (equations called the equations of motion of the system). You must solve the
equations of motion to nd the trajectories of the masses, their positions as a function of time, as
well as their velocities as a function of time if desired. Finally, armed with these trajectories, you
must answer all the questions the problem poses using algebra and reason and rarely in this class
arithmetic!
Simple enough.
Lets put this simple solution methodology to the test by solving the following one dimensional,
single mass example problem, and then see what weve learned.
Example 1.7.1: A Mass Falling from Height H
Lets solve the problem we posed above, and as we do so develop a solution rubric a recipe for
solving all problems involving dynamics
42
! The problem, recall, was to drop a mass m from rest
from a height H, algebraically nd the trajectory (the position function that solves the equations
of motion) and velocity (the time derivative of the trajectory), and then answer any questions that
might be asked using a mix of algebra, intuition, experience and common sense. For this
rst problem well postpone actually asking any question until we have these solutions so that we
can see what kinds of questions one might reasonably ask and be able to answer.
The rst step in solving this or any physics problem is to visualize whats going on! Mass m?
Height H? Drop? Start at rest? Fall? All of these things are input data that mean something when
translated into algebraic physicsese, the language of physics, but in the end we have to coordinatize
the problem (choose a coordinate system in which to do the algebra and solve our equations for an
answer) and to choose a good one we need to draw a representation of the problem.
Physics problems that you work and hand in that have no gure, no picture, not even additional
hand-drawn decorations on a provided gure will rather soon lose points in the grading scheme!
At rst we (the course faculty) might just remind you and not take points o, but by your second
assignment youd better be adding some relevant artwork to every solution
43
. Figure 4 is what an
42
At least for the next couple of weeks... but seriously, this rubric is useful all the way up to graduate physics.
43
This has two benets one is that it actually is a critical step in solving the problem, the other is that drawing
engages the right hemisphere of your brain (the left hemisphere is the one that does the algebra). The right hemisphere
is the one that controls formation of long term memory, and it can literally get bored, independently of the left
hemisphere and interrupt your ability to work. If youve ever worked for a very long time on writing something
very dry (left hemisphere) or doing lots of algebraic problems (left hemisphere) and found your eyes being almost
irresistably drawn up to look out the window at the grass and trees and ponies and bright sun, then know that it is
your right brain that has taken over your body because it is dying in there, bored out of its (your!) gourd.
Figure 4: A picture of a ball being dropped from a height H, with a suitable one-dimensional
coordinate system added. Note that the gure clearly indicates that it is the force of gravity that
makes it fall. The pictures of Satchmo (my border collie) and the tree and sun and birds arent
strictly necessary and might even be distracting, but my right brain was bored when I drew this
picture and they do orient the drawing and make it more fun!
actual gure you might draw to accompany a problem might look like.
Note a couple of things about this gure. First of all, it is large it took up 1/4+ of the
unlined/white page I drew it on. This is actually good practice do not draw postage-stamp sized
gures! Draw them large enough that you can decorate them, not with Satchmo but with things like
coordinates, forces, components of forces, initial data reminders. This is your brain were talking
about here, because the paper is functioning as an extension of your brain when you use it to help
solve the problem. Is your brain postage-stamp sized? Dont worry about wasting paper paper is
cheap, physics educations are expensive. Use a whole page (or more) per problem solution at this
point, not three problems per page with gures that require a magnifying glass to make out.
When I (or your instructor) solve problems with you, this is the kind of thing youll see us draw,
over and over again, on the board, on paper at a table, wherever. In time, physicists become pretty
good schematic artists and so should you. However, in a textbook we want things to be clearer and
prettier, so Ill redraw this in gure 5, this time with a computer drawing tool (xg) that Ill use
for drawing most of the gures included in the textbook. Alas, it wont have Satchmo, but it does
have all of the important stu that should be on your hand-drawn gures.
Note that I drew two alternative ways of adding coordinates to the problem. The one on the
left is appropriate if you visualize the problem from the ground, looking up like Satchmo, where
the ground is at zero height. This might be e.g. dropping a ball o of the top of Duke Chapel, for
example, with you on the ground watching it fall.
The one or the right works if you visualize the problem as something like dropping the same ball
To keep the right brain happy while you do left brained stu, give it something to do listen to music, draw pictures
or visualize a lot, take ve minute right-brain-breaks and deliberately look at something visually pleasing. If your
right brain is happy, you can work longer and better. If your right brain is engaged in solving the problem you will
remember what you are working on much better, it will make more sense, and your attention wont wander as much.
Physics is a whole brain subject, and the more pathways you use while working on it, the easier it is to understand
and remember!
x
mg
H
+y
m
v = 0 @ t = 0
mg
+y
x
v = 0 @ t = 0
m
H
Figure 5: The same gure and coordinate system, drawn perfectly with xg, plus a second (alter-
native) coordinatization.
into a well, where the ground is still at zero height but now it falls down to a negative height H
from zero instead of starting at H and falling to height zero. Or, you dropping the ball from the
top of the Duke Chapel and counting y = 0 as the height where you are up there (and the initial
position in y of the ball), with the ground at y = H below the nal position of the ball after it
falls.
Now pay attention, because this is important: Physics doesnt care which coordinate sys-
tem you use! Both of these coordinatizations of the problem are inertial reference frames. If you
think about it, you will be able to see how to transform the answers obtained in one coordinate
system into the corresponding answers in the other (basically subtract a constant H from the values
of y in the left hand gure and you get y
in the right hand gure, right?). Newtons Laws will

work perfectly in either inertial reference frame
44
, and truthfully there are an innite number of
coordinate frames you could choose that would all describe the same problem in the end. You can
therefore choose the frame that makes the problem easiest to solve!
Personally, from experience I prefer the left hand frame it makes the algebra a tiny bit prettier
but the one on the right is really almost as good. I reject without thinking about it all of the frames
where the mass m e.g. starts at the initial position y
i
= H/2 and falls down to the nal position
y
f
= H/2. I do sometimes consider a frame like the one on the right with y positive pointing
down, but it often bothers students to have down be positive (even though it is very natural to
orient our coordinates so that

F points in the positive direction of one of them) so well work into
that gently. Finally, I did draw the x (horizontal) coordinate and ignored altogether for now the
z coordinate that in principle is pointing out of the page in a right-handed coordinate frame. We
dont really need either of these because no aspect of the motion will change x or z (there are no
forces acting in those directions) so that the problem is eectively one-dimensional.
Next, we have to put in the physics, which at this point means: Draw in all of the forces
that act on the mass as proportionate vector arrows in the direction of the force. The
proportionate part will be dicult at rst until you get a feeling for how large the forces are likely
to be relative to one another but in this case there is only one force, gravity that acts, so we can
write on our page (and on our diagram) the vector relation:
F = mg y (38)
or if you prefer, you can write the dimension-labelled scalar equation for the magnitude of the force
in the y-direction:
F
y
= mg (39)
44
For the moment you can take my word for this, but we will prove it in the next week/chapter when we learn how
to systematically change between coordinate frames!
Note well! Either of these is acceptable vector notation because the force is a vector (magnitude
and direction). So is the decoration on the gure an arrow for direction labelled mg.
What is not quite right (to the tune of minus a point or two at the discretion of the grader) is to
just write F = mg on your paper without indicating its direction somehow. Yes, this is the magnitude
of the force, but in what direction does it point in the particular coordinate system you drew into
your gure? After all, you could have made +x point down as easily as y! Practice connecting
your visualization of the problem in the coordinates you selected to a correct algebraic/symbolic
description of the vectors involved.
In context, we dont really need to write F
x
= F
z
= 0 because they are so clearly irrelevant.
However, in many other problems we will need to include either or both of these. Youll quickly get
a feel for when you do or dont need to worry about them.
Now comes the key step setting up all of the algebra that leads to the solution. We write
Newtons Second Law for the mass m, and algebraically solve for the acceleration! Since there is
only one relevant component of the force in this one-dimensional problem, we only need to do this
one time for the scalar equation for that component.:
F
y
= mg = ma
y
ma
y
= mg
a
y
= g
d
2
y
dt
2
=
dv
y
dt
= g (40)
where g = 10 m/second
2
is the constant (within 2%, close to the Earths surface, remember).
We are all but done at this point. The last line (the algebraic expression for the acceleration)
is called the equation of motion for the system, and one of our chores will be to learn how to solve
several common kinds of equation of motion. This one is a constant acceleration problem. Lets
do it.
Here is the algebra involved. Learn it. Practice doing this until it is second nature when solving
simple problems like this. I do not recommend memorizing the solution you obtain at the end, even
though when you have solved the problem enough times you will probably remember it anyway for
the rest of your share of eternity. Start with the equation of motion for a constant acceleration:
dv
y
dt
= g Next, multiply both sides by dt to get:
dv
y
= g dt Then integrate both sides:
_
dv
y
=
_
g dt doing the indenite integrals to get:
v
y
(t) = gt +C (41)
The nal C is the constant of integration of the indenite integrals. We have to evaluate it using
the given (usually initial) conditions. In this case we know that:
v
y
(0) = g 0 +C = C = 0 (42)
(Recall that we even drew this into our gure to help remind us it is the bit about being dropped
from rest at time t = 0.) Thus:
v
y
(t) = gt (43)
We now know the velocity of the dropped ball as a function of time! This is good, we are likely
to need it. However, the solution to the dynamical problem is the trajectory function, y(t). To nd
it, we repeat the same process, but now use the denition for v
y
in terms of y:
dy
dt
= v
y
(t) = gt Multiply both sides by dt to get:
dy = gt dt Next, integrate both sides:
_
dy =
_
gt dt to get:
y(t) =
1
2
gt
2
+D (44)
The nal D is again the constant of integration of the indenite integrals. We again have to evaluate
it using the given (initial) conditions in the problem. In this case we know that:
y(0) =
1
2
g 0
2
+D = D = H (45)
because we dropped it from an initial height y(0) = H. Thus:
y(t) =
1
2
gt
2
+H (46)
and we know everything there is to know about the motion! We know in particular exactly where it
is at all times (until it hits the ground) as well as how fast it is going and in what direction. Sure,
later well learn how to evaluate other quantities that depend on these two, but with the solutions
in hand evaluating those quantities will be (we hope) trivial.
Finally, we have to answer any questions that the problem might ask! Note well that
the problem may not have told you to evaluate y(t) and v
y
(t), but in many cases youll need them
anyway to answer the questions they do ask. Here are a couple of common questions you can now
answer using the solutions you just obtained:
a) How long will it take for the ball to reach the ground?
b) How fast is it going when it reaches the ground?
To answer the rst one, we use a bit of algebra. The ground is (recall) y = 0 and it will reach
there at some specic time (the time we want to solve for) t
g
. We write the condition that it is at
the ground at time t
g
:
y(t
g
) =
1
2
gt
2
g
+H = 0 (47)
If we rearrange this and solve for t
g
we get:
t
g
=
2H
g
(48)
Hmmm, there seem to be two times at which y(t
g
) equals zero, one in the past and one in the
future. The right answer, of course, must be the one in the future: t
g
= +
_
2H/g, but you should
think about what the one in the past means, and how the algebraic solution weve just developed is
ignorant of things like your hand holding the ball before t = 0 and just what value of y corresponds
to the ground...
That was pretty easy. To nd the speed at which it hits the ground, one can just take our correct
(future) time and plug it into v
y
! That is:
v
g
= v
y
(t
g
) = gt
g
= g
2H
g
=
_
2gH (49)
Note well that it is going down (in the negative y direction) when it hits the ground. This is a good
hint for the previous puzzle. What direction would it have been going at the negative time? What
kind of motion does the overall solution describe, on the interval from t = (, )? Do we need
to use a certain amount of common sense to avoid using the algebraic solution for times or values
of y for which they make no sense, such as y < 0 or t < 0 (in the ground or before we let go of the
ball, respectively)?
The last thing we might look at Im going to let you do on your own (dont worry, its easy
enough to do in your head). Assuming that this algebraic solution is valid for any reasonable H,
how fast does the ball hit the ground after falling (say) 5 meters? How about 20 = 4 5 meters?
How about 80 = 16 5 meters? How long does it take for the ball to fall 5 meters, 20 meters, 80
meters, etc? In this course we wont do a lot of arithmetic, but whenever we learn a new idea with
parameters like g in it, it is useful to do a little arithmetical exploration to see what a reasonable
answer looks like. Especially note how the answers scale with the height if one drops it from 4x
the height, how much does that increase the time it falls and speed with which it hits?
One of these heights causes it to hit the ground in one second, and all of the other answers scale
with it like the square root. If you happen to remember this height, you can actually estimate how
long it takes for a ball to fall almost any height in your head with a division and a square root, and
if you multiply the time answer by ten, well, there is the speed with which it hits! Well do some
conceptual problems that help you understand this scaling idea for homework.
This (a falling object) is nearly a perfect problem archetype or example for one dimensional
motion. Sure, we can make it more complicated, but usually well do that by having more than one
thing move in one dimension and then have to gure out how to solve the two problems simultaneously
and answer questions given the results.
Lets take a short break to formally solve the equation of motion we get for a constant force in
one dimension, as the general solution exhibits two constants of integration that we need to be able
to identify and evaluate from initial conditions. Note well that the next problem is almost identical
to the former one. It just diers in that you are given the force

F itself, not a knowledge that the
force is e.g. gravity.
Example 1.7.2: A Constant Force in One Dimension
This time well imagine a dierent problem. A car of mass m is travelling at a constant speed v
0
as
it enters a long, nearly straight merge lane. A distance d from the entrance, the driver presses the
accelerator and the engine exerts a constant force of magnitude F on the car.
a) How long does it take the car to reach a nal velocity v
f
> v
0
?
b) How far (from the entrance) does it travel in that time?
As before, we need to start with a good picture of what is going on. Hence a car:
m
F
d
D
f
v
0
v
0
v
t = 0 t = t
f
x
y
Figure 6: One possible way to portray the motion of the car and coordinatize it.
In gure 6 we see what we can imagine are three slices of the cars position as a function of
time at the moments described in the problem. On the far left we see it entering a long, nearly
straight merge lane. The second position corresponds to the time the car is a distance d from the
entrance, which is also the time the car starts to accelerate because of the force F. I chose to start
the clock then, so that I can integrate to nd the position as a function of time while the force is
being applied. The nal position corresponds to when the car has had the force applied for a time
t
f
and has acquired a velocity v
f
. I labelled the distance of the car from the entrance D at that
time. The mass of the car is indicated as well.
This gure completely captures the important features of the problem! Well, almost. There are
two forces I ignored altogether. One of them is gravity, which is pulling the car down. The other is
the so-called normal force exerted by the road on the car this force pushes the car up. I ignored
them because my experience and common sense tell me that under ordinary circumstances the road
doesnt push on the car so that it jumps into the air, nor does gravity pull the car down into the road
the two forces will balance and the car will not move or accelerate in the vertical direction. Next
week well take these forces into explicit account too, but here Im just going to use my intuition
that they will cancel and hence that the y-direction can be ignored, all of the motion is going to be
in the x-direction as Ive dened it with my coordinate axes.
Its time to follow our ritual. We will write Newtons Second Law and solve for the acceleration
(obtaining an equation of motion). Then we will integrate twice to nd rst v
x
(t) and then x(t). We
will have to be extra careful with the constants of integration this time, and in fact will get a very
general solution, one that can be applied to all constant acceleration problems, although I do not
recommend that you memorize this solution and try to use it every time you see Newtons Second
Law! For one thing, well have quite a few problems this year where the force, and acceleration, are
not constant and in those problems the solution we will derive is wrong. Alas, to my own extensive
and direct experience, students that memorize kinematic solutions to the constant acceleration
problem instead of learning to solve it with actual integration done every time almost invariably
try applying the solution to e.g. the harmonic oscillator problem later, and I hate that. So dont
memorize the answer; learn how to derive it and practice the derivation until (sure) you know the
result, and also know when you can use it.
Thus:
F = ma
x
a
x
=
F
m
= a
0
(a constant)
dv
x
dt
= a
0
(50)
Next, multiply through by dt and integrate both sides:
v
x
(t) =
_
dv
x
=
_
a
0
dt = a
0
t +V =
F
m
t +V (51)
Either of the last two are valid answers, provided that we dene a
0
= F/m somewhere in the solution
and also provided that the problem doesnt explicitly ask for an answer to be given in terms of F
and m. V is a constant of integration that we will evaluate below.
Note that if a
0
= F/m was not a constant (say that F(t) is a function of time) then we would
have to do the integral :
v
x
(t) =
_
F(t)
m
dt =
1
m
_
F(t) dt =??? (52)
At the very least, we would have to know the explicit functional form of F(t) to proceed, and the
answer would not be linear in time.
At time t = 0, the velocity of the car in the x-direction is v
0
, so (check for yourself) V = v
0
and:
v
x
(t) = a
0
t +v
0
=
dx
dt
(53)
We multiply this equation by dt on both sides, integrate, and get:
x(t) =
_
dx =
_
(a
0
t +v
0
) dt =
1
2
a
0
t
2
+v
0
t +x
0
(54)
where x
0
is the constant of integration. We note that at time t = 0, x(0) = d, so x
0
= d. Thus:
x(t) =
1
2
a
0
t
2
+v
0
t +d (55)
It is worth collecting the two basic solutions in one place. It should be obvious that for any
one-dimensional (say, in the x-direction) constant acceleration a
x
= a
0
problem we will always nd
that:
v
x
(t) = a
0
t +v
0
(56)
x(t) =
1
2
a
0
t
2
+v
0
t +x
0
(57)
where x
0
is the x-position at time t = 0 and v
0
is the x-velocity at time t = 0. You can see why it
is so very tempting to just memorize this result and pretend that you know a piece of physics, but
dont!
The algebra that led to this answer is basically ordinary math with units. As weve seen, math
with units has a special name all its own kinematics and the pair of equations 56 and 57 are
called the kinematic solutions to the constant acceleration problem. Kinematics should be contrasted
with dynamics, the physics of forces and laws of nature that lead us to equations of motion. One
way of viewing our solution strategy is that after drawing and decorating our gure, of course
we solve rst the dynamics problem of writing our dynamical principle (Newtons Second Law with
the appropriate vector total force), turning it into a dierential equation of motion, then solving
the resulting kinematics problem represented by the equation of motion with calculus. Dont be
tempted to skip the calculus and try to memorize the kinematic solutions it is just as important
to understand and be able to do the kinematic calculus quickly and painlessly as it is to be able to
set up the dynamical part of the solution.
Now, of course, we have to actually answer the questions given above. To do this requires as
before logic, common sense, intuition, experience, and math. First, at what time t
f
does the car
have speed v
f
? When:
v
x
(t
f
) = v
f
= a
0
t
f
+v
0
(58)
of course. You can easily solve this for t
f
. Note that I just transformed the English statement At
t
f
, the car must have speed v
f
into an algebraic equation that means the exact same thing!
Second, what is D? Well in English, the distance D from the entrance is where the car is at time
t
f
, when it is also travelling at speed v
f
. If we turn this sentence into an equation we get:
x(t
f
) = D =
1
2
a
0
t
2
f
+v
0
t
f
+d (59)
Again, having solved the previous equation algebraically, you can substitute the result for t
f
into
this equation and get D in terms of the originally given quantities! The problem is solved, the
questions are answered, were nished.
Or rather, you will be nished, after you ll in these last couple of steps on your own!
1.7.1: Solving Problems with More Than One Object
One of the keys to answering the questions in both of these examples has been turning easy-enough
statements in English into equations, and then solving the equations to obtain an answer to a
question also framed in English. So far, we have solved only single equations, but we will often be
working with more than one thing at a time, or combining two or more principles, so that we have
to solve several simultaneous equations.
The only change we might make to our existing solution strategy is to construct and solve the
equations of motion for each object or independent aspect (such as dimension) of the problem. In
a moment, well consider problems of the latter sort, where this strategy will work when the force
in one coordinate direction is independent of the force in another coordinate direction! . First,
though, lets do a couple of very simple one-dimensional problems with two objects with some sort
of constraint connecting the motion of one to the motion of the other.
Example 1.7.3: Atwoods Machine
m
m
1
2
m
1
g
m
2
g
T
T
Figure 7: Atwoods Machines consists of a pair of masses (usually of dierent mass) connected by a
string that runs over a pulley as shown. Initially we idealize by considering the pulley to be massless
and frictionless, the string to be massless and unstretchable, and ignore drag forces.
A mass m
1
and a second mass m
2
are hung at both ends of a massless, unstretchable string that
runs over a frictionless, massless pulley as shown in gure 7. Gravity near the Earths surface pulls
both down. Assuming that the masses are released from rest at time t = 0, nd:
a) The acceleration of both masses;
b) The tension T in the string;
c) The speed of the masses after they have moved through a distance H in the direction of the
more massive one.
The trick of this problem is to note that if mass m
2
goes down by a distance (say) x, mass m
1
goes up by the same distance x and vice versa. The magnitude of the displacement of one is the
same as that of the other, as they are connected by a taut unstretchable string. This also means
that the speed of one rising equals the speed of the other falling, the magnitude of the acceleration
of one up equals the magnitude of the acceleration of the other down. So even though it at rst looks
like you need two coordinate systems for this problem, x
1
(measured from m
1
s initial position, up
or down) will equal x
2
(measured from m
2
s initial position, down or up) be the same. We therefore
can just use x to describe this displacement (the displacement of m
1
up and m
2
down from its
starting position), with v
x
and a
x
being the same for both masses with the same convention.
This, then, is a wraparound one-dimensional coordinate system, one that curves around the
pulley. In these coordinates, Newtons Second Law for the two masses becomes the two equations:
F
1
= T m
1
g = m
1
a
x
(60)
F
2
= m
2
g T = m
2
a
x
(61)
This is a set of two equations and two unknowns (T and a
x
). It is easiest to solve by elimination.
If we add the two equations we eliminate T and get:
m
2
g m
1
g = (m
2
m
1
)g = m
1
a
x
+m
2
a
x
= (m
1
+m
2
)a
x
(62)
or
a
x
=
m
2
m
1
m
1
+m
2
g (63)
In the gure above, if m
2
> m
1
(as the gure suggests) then both mass m
2
will accelerate down and
m
1
will accelerate up with this constant acceleration.
We can nd T by substituting this value for a
x
into either force equation:
T m
1
g = m
1
a
x
T m
1
g =
m
2
m
1
m
1
+m
2
m
1
g
T =
m
2
m
1
m
1
+m
2
m
1
g +m
1
g
T =
m
2
m
1
m
1
+m
2
m
1
g +
m
2
+m
1
m
1
+m
2
m
1
g
T =
2m
2
m
1
m
1
+m
2
g (64)
a
x
is constant, so we can evaluate v
x
(t) and x(t) exactly as we did for a falling ball:
a
x
=
dv
x
dt
=
m
2
m
1
m
1
+m
2
g
dv
x
=
m
2
m
1
m
1
+m
2
g dt
_
dv
x
=
_
m
2
m
1
m
1
+m
2
g dt
v
x
=
m
2
m
1
m
1
+m
2
gt +C
v
x
(t) =
m
2
m
1
m
1
+m
2
gt (65)
and then:
v
x
(t) =
dx
dt
=
m
2
m
1
m
1
+m
2
gt
dx =
m
2
m
1
m
1
+m
2
gt dt
_
dx =
_
m
2
m
1
m
1
+m
2
gt dt
x =
1
2
m
2
m
1
m
1
+m
2
gt
2
+C
x(t) =
1
2
m
2
m
1
m
1
+m
2
gt
2
(66)
(where C and C
are set from our knowledge of the initial conditions, x(0) = 0 and v(0) = 0 in the
coordinates we chose).
Now suppose that the blocks fall a height H (only m
2
actually falls, m
1
goes up). Then we
can, as before, nd out how long it takes for x(t
h
) = H, then substitute this into v
x
(t
h
) to nd the
speed. I leave it as an exercise to show that this answer is:
v
x
(t
h
) =
_
m
2
m
1
m
1
+m
2
_
2gH (67)
Example 1.7.4: Braking for Bikes, or Just Breaking Bikes?
A car of mass M is overtaking a bicyclist. Initially, the car is travelling at speed v
0c
and the bicyclist
is travelling at v
0b
< v
0c
in the same direction. At a time that the bicyclist is D meters away, the
driver of the car suddenly sees that he is on a collision course and applies the brakes, exerting a force
F on his car (where the minus sign just means that he is slowing down, diminishing his velocity.
Assuming that the bicyclist doesnt speed up or slow down, does he hit the bike?
At this point you should have a pretty good idea how to proceed for each object. First, well
draw a gure with both objects and formulate the equations of motion for each object separately.
Second, well solve the equations of motion for reach object. Third, well write an equation that
captures the condition that the car hits the bike, and see if that equation has any solutions. If so,
then it is likely that the car will be breaking, not braking (in time)!
F
D
M
m
t = 0
x
v
v
0c
0b
y
Figure 8: The initial picture of the car overtaking the bike at the instant it starts to brake. Again
we will ignore the forces in the y-direction as we know that the car doesnt jump over the bike and
well pretend that the biker cant just turn and get out of the way as well.
Heres the solution, without most of the details. You should work through this example, lling
in the missing details and making the solution all pretty. The magnitude of the acceleration of the
car is a
c
= F/M, and well go ahead and use this constant acceleration a
c
to formulate the answer
we can always do the arithmetic and substitute at the end, given some particular values for F and
M.
Integrating this (and using x
c
(0) = 0, v
c
(0) = v
0c
) you will get:
v
c
(t) = a
c
t +v
0c
(68)
x
c
(t) =
1
2
a
c
t
2
+v
0c
t (69)
The acceleration of the bike is a
b
= 0. This means that:
v
b
(t) = a
b
t +v
0b
= v
0b
(70)
The velocity of the bike is constant because there is no (net) force acting on it and hence it has no
acceleration. Integrating this one gets (using x
b
(0) = D):
x
b
(t) = v
0b
t +D (71)
Now the big question: Does the car hit the bike? If it does, it does so at some real time, call
it t
h
. Hitting means that there is no distance between them they are at the same place at the
same time, in particular at this time t
h
. Turning this sentence into an equation, the condition for a
collision is algebraically:
x
b
(t
h
) = v
0b
t
h
+D =
1
2
a
c
t
2
h
+v
0c
t
h
= x
c
(t
h
) (72)
Rearranged, this is a quadratic equation:
1
2
a
c
t
2
h
(v
0c
v
0b
) t
h
+D = 0 (73)
and therefore has two roots. If we write down the quadratic formula:
t
h
=
(v
0c
v
0b
)
_
(v
0c
v
0b
)
2
2a
c
D
a
c
(74)
we can see that there will only be a real (as opposed to imaginary) time t
h
that solves the collision
condition if the argument of the square root is non-negative. That is:
(v
0c
v
0b
)
2
2a
c
D (75)
If this is true, there will be a collision. If it is false, the car will never reach the bike.
There is actually a second way to arrive at this result. One can nd the time t
s
that the car is
travelling at the same speed as the bike. Thats really pretty easy:
v
0b
= v
c
(t
s
) = a
c
t
s
+v
0c
(76)
or
t
s
=
(v
0c
v
0b
)
a
c
(77)
Now we locate the car relative to the bike. If the collision hasnt happened by t
s
it never will, as
afterwards the car will be slower than the bike and the bike will pull away. If the position of the car
is behind (or barely equal to) the position of the bike at t
s
, all is well, no collision occurs. That is:
x
c
(t
s
) =
1
2
a
c
t
2
s
+v
0c
t
s
v
0b
t
s
+D (78)
if no collision occurs. Its left as an exercise to show that this leads to the same condition that the
quadratic gives you.
Next, lets see what happens when we have only one object but motion in two dimensions.
1.8: Motion in Two Dimensions
The idea of motion in two or more dimensions is very simple. Force is a vector, and so is acceleration.
Newtons Second Law is a recipe for taking the total force and converting it into a dierential equation
of motion:
a =
d
2
r
dt
2
=
F
tot
m
(79)
In the most general case, this can be quite dicult to solve. For example, consider the forces
that act upon you throughout the day every step you take, riding in a car, gravity, friction, even
the wind exert forces subtle or profound on your mass and accelerate you rst this way, then that as
you move around. The total force acting on you varies wildly with time and place, so even though
your trajectory is a solution to just such an equation of motion, computing it algebraically is out of
the question. Computing it with a computer would be straightforward if the forces were all known,
but of course they vary according to your volition and the circumstances of the moment and are
hardly knowable ahead of time.
However, much of what happens in the world around you can actually be at least approximated
by relatively simple (if somewhat idealized) models and explicitly solved. These simple models
generally arise when the forces acting are due to the well-known forces of nature or force rules
listed above and hence point in specic directions (so that their vector description can be analyzed)
and are either constant in time or vary in some known way so that the calculus of the solution is
tractable
45
.
We will now consider only these latter sorts of forces: forces that act in a well-dened direction
with a computable value (initially, with a computable constant value, or a value that varies in some
simple way with position or time). If we write the equation of motion out in components:
a
x
=
d
2
x
dt
2
=
F
tot,x
m
(80)
a
y
=
d
2
y
dt
2
=
F
tot,y
m
(81)
a
z
=
d
2
z
dt
2
=
F
tot,z
m
(82)
we will often reduce the complexity of the problem from a three dimensional problem to three
one dimensional problems of the sort we just learned to solve in the section above.
Of course, theres a trick to it. The trick is this:
Select a coordinate system in which one of the coordinate axes is aligned with
the total force.
We wont always be able to do this, but when it can it will get us o to a very good start, and trying
it will help us understand what to do when we hit problems where this alone wont quite work or
help us solve the problem.
The reason this step (when possible) simplies the problem is simple enough to understand: In
this particular coordinate frame (with the total force pointing in a single direction along one of
the coordinate axes), the total force in the other directions adds up to zero! That means that all
acceleration occurs only along the selected coordinate direction. Solving the equations of motion in
the other directions is then trivial it is motion with a constant velocity (which may be zero, as in
the case of dropping a ball vertically down from the top of a tower in the problems above). Solving
the equation of motion in the direction of the total force itself is then the problem, and you will
need lots of practice and a few good examples to show you how to go about it.
To make life even simpler, we will now further restrict ourselves to the class of problems where
the acceleration and velocity in one of the three dimensions is zero. In that case the value of that
coordinate is constant, and may as well be taken to be zero. The motion (if any) then occurs in
the remaining two dimensional plane that contains the origin. In the problems below, we will nd
it useful to use one of two possible two-dimensional coordinate systems to solve for the motion:
Cartesian coordinates (which weve already begun to use, at least in a trivial way) and Plane Polar
coordinates, which we will review in context below.
As you will see, solving problems in two or three dimensions with a constant force direction
simply introduces a few extra steps into the solution process:
45
Tractable here means that it can either be solved algebraically, true for many of the force laws or rules, or at
least solved numerically. In this course you may or may not be required or expected to explore numerical solutions
to the dierential equations with e.g. matlab, octave, or mathematica.
Decomposing the known forces into a coordinate system where one of the coordinate axes lines
up with the (expected) total force...
Solving the individual one-dimensional motion problems (where one or two of the resulting
solutions will usually be trivial, e.g. constant motion)...
Finally, reconstructing the overall (vector) solution from the individual solutions for the inde-
pendent vector coordinate directions...
and answering any questions as usual.
1.8.1: Free Flight Trajectories Projectile Motion
Perhaps the simplest example of this process adds just one small change to our rst example. Instead
of dropping a particle straight down let us imagine throwing the ball o of a tower, or ring a cannon,
or driving a golf ball o of a tee or shooting a basketball. All of these are examples of projectile motion
motion under the primary action of gravity where the initial velocity in some horizontal direction
is not zero.
Note well that we will necessarily idealize our treatment by (initially) neglecting some of the
many things that might aect the trajectory of all of these objects in the real world drag forces
which both slow down e.g. a golf ball and exert lift on it that can cause it to hook or slice, the
fact that the earth is not really an inertial reference frame and is rotating out underneath the free
ight trajectory of a cannonball, creating an apparent deection of actual projectiles red by e.g.
naval cannons. That is, only gravity near the earths surface will act on our ideal particles for now.
The easiest way to teach you how to handle problems of this sort is just to do a few examples
there are really only three distinct cases one can treat two rather special ones and the general
solution. Lets start with the simplest of the special ones.
Example 1.8.1: Trajectory of a Cannonball
m
mg
y
x R
v
0
Figure 9: An idealized cannon, neglecting the drag force of the air. Let x be the horizontal direction
and y be the vertical direction, as shown. Note well that

F
g
= mg y points along one of the
coordinate directions while F
x
= (F
z
=)0 in this coordinate frame.
A cannon res a cannonball of mass m at an initial speed v
0
at an angle with respect to the
ground as shown in gure 9. Find:
a) The time the cannonball is in the air.
b) The range of the cannonball.
Weve already done the rst step of a good solution drawing a good gure, selecting and
sketching in a coordinate system with one axis aligned with the total force, and drawing and labelling
all of the forces (in this case, only one). We therefore proceed to write Newtons Second Law for
both coordinate directions.
F
x
= ma
x
= 0 (83)
F
y
= ma
y
= m
d
2
y
dt
2
= mg (84)
We divide each of these equations by m to obtain two equations of motion, one for x and the
other for y:
a
x
= 0 (85)
a
y
= g (86)
We solve them independently. In x:
a
x
=
dv
x
dt
= 0 (87)
The derivative of any constant is zero, so the x-component of the velocity does not change in time.
We nd the initial (and hence constant) component using trigonometry:
v
x
(t) = v
0x
= v
0
cos() (88)
We then write this in terms of derivatives and solve it:
v
x
=
dx
dt
= v
0
cos()
dx = v
0
cos() dt
_
dx = v
0
cos()
_
dt
x(t) = v
0
cos()t +C
We evaluate C (the constant of integration) from our knowledge that in the coordinate system we
selected, x(0) = 0 so that C = 0. Thus:
x(t) = v
0
cos()t (89)
The solution in y is more or less identical to the solution that we obtained above dropping a ball,
except the constants of integration are dierent:
a
y
=
dv
y
dt
= g
dv
y
= g dt
_
dv
y
=
_
g dt
v
y
(t) = gt +C
(90)
For this problem, we know from trigonometry that:
v
y
(0) = v
0
sin() (91)
so that C
= v
0
sin() and:
v
y
(t) = gt +v
0
sin() (92)
We write v
y
in terms of the time derivative of y and integrate:
dy
dt
= v
y
(t) = gt +v
0
sin()
dy = (gt +v
0
sin()) dt
_
dy =
_
(gt +v
0
sin()) dt
y(t) =
1
2
gt
2
+v
0
sin()t +D (93)
Again we use y(0) = 0 in the coordinate system we selected to set D = 0 and get:
y(t) =
1
2
gt
2
+v
0
sin()t (94)
Collecting the results from above, our overall solution is thus:
x(t) = v
0
cos()t (95)
y(t) =
1
2
gt
2
+v
0
sin()t (96)
v
x
(t) = v
0x
= v
0
cos() (97)
v
y
(t) = gt +v
0
sin() (98)
We know exactly where the cannonball is at all times, and we know exactly what its velocity is as
well. Now lets see how we can answer the equations.
To nd out how long the cannonball is in the air, we need to write an algebraic expression that
we can use to identify when it hits the ground. As before (dropping a ball) hitting the ground in
algebra-speak is y(t
g
) = 0, so nding t
g
such that this is true should do the trick:
y(t
g
) =
1
2
gt
2
g
+v
0
sin()t
g
= 0
_
1
2
gt
g
+v
0
sin()
_
t
g
= 0
or
t
g,1
= 0 (99)
t
g,2
=
2v
0
sin()
g
(100)
are the two roots of this (factorizable) quadratic. The rst root obviously describes when the ball
was red, so it is the second one we want. The ball hits the ground after being in the air for a time
t
g,2
=
2v
0
sin()
g
(101)
Now it is easy to nd the range of the cannonball, R. R is just the value of x(t) at the time that
the cannonball hits!
R = x(t
g,2
) =
2v
2
0
sin() cos()
g
(102)
Using a trig identity one can also write this as:
R =
v
2
0
sin(2)
g
(103)
The only reason to do this is so that one can see that the range of this projectile is symmetric: It
is the same for = /4 for any [0, /4].
For your homework you will do a more general case of this, one where the cannonball (or golf
ball, or arrow, or whatever) is red o of the top of a cli of height H. The solution will proceed
identically except that the initial and nal conditions may be dierent. In general, to nd the time
and range in this case one will have to solve a quadratic equation using the quadratic formula (instead
of simple factorization) so if you havent reviewed or remembered the quadratic formula before now
in the course, please do so right away.
1.8.2: The Inclined Plane
The inclined plane is another archetypical problem for motion in two dimensions. It has many
variants. Well start with the simplest one, one that illustrates a new force, the normal force. Recall
from above that the normal force is whatever magnitude it needs to be to prevent an object from
moving in to a solid surface, and is always perpendicular (normal) to that surface in direction.
In addition, this problem beautifully illustrates the reason one selects coordinates aligned with
the total force when that direction is consistent throughout a problem, if at all possible.
Example 1.8.2: The Inclined Plane
m
x
y
N
mg
H
L
Figure 10: This is the naive/wrong coordinate system to use for the inclined plane problem. The
problem can be solved in this coordinate frame, but the solution (as you can see) would be quite
dicult.
A block m rests on a plane inclined at an angle of with respect to the horizontal. There is no
friction (yet), but the plane exerts a normal force on the block that keeps it from falling straight
down. At time t = 0 it is released (at a height H = Lsin() above the ground), and we might then
be asked any of the usual questions how long does it take to reach the ground, how fast is it
going when it gets there and so on.
The motion we expect is for the block to slide down the incline, and for us to be able to solve
the problem easily we have to use our intuition and ability to visualize this motion to select the best
coordinate frame.
Lets start by doing the problem foolishly. Note well that in principle we actually can solve the
problem set up this way, so it isnt really wrong, but in practice while I can solve it in this frame
(having taught this course for 30 years and being pretty good at things like trig and calculus) it is
somewhat less likely that you will have much luck if you havent even used trig or taken a derivative
for three or four years. Kids, Dont Try This at Home
46
...
In gure 10, Ive drawn a coordinate frame that is lined up with gravity. However, gravity is not
the only force acting any more. We expect the block to slide down the incline, not move straight
down. We expect that the normal force will exert any force needed such that this is so. Lets see
what happens when we try to decompose these forces in terms of our coordinate system.
We start by nding the components of

N, the vector normal force, in our coordinate frame:
N
x
= N sin() (104)
N
y
= N cos() (105)
where N = |
N| is the (unknown) magnitude of the normal force.

We then add up the total forces in each direction and write Newtons Second Law for each
directions total force :
F
x
= N sin() = ma
x
(106)
F
y
= N cos() mg = ma
y
(107)
Finally, we write our equations of motion for each direction:
a
x
=
N sin()
m
(108)
a
y
=
N cos() mg
m
(109)
Unfortunately, we cannot solve these two equations as written yet. That is because we do not
know the value of N; it is in fact something we need to solve for! To solve them we need to add
a condition on the solution, expressed as an equation. The condition we need to add is that the
motion is down the incline, that is, at all times:
y(t)
Lcos() x(t)
= tan() (110)
must be true as a constraint
47
. That means that:
y(t) = (Lcos() x(t)) tan()
dy(t)
dt
=
dx(t)
dt
tan()
d
2
y(t)
dt
2
=
d
2
x(t)
dt
2
tan()
a
y
= a
x
tan() (111)
where we used the fact that the time derivative of Lcos() is zero! We can use this relation to
eliminate (say) a
y
from the equations above, solve for a
x
, then backsubstitute to nd a
y
. Both are
constant acceleration problems and hence we can easily enough solve them. But yuk! The solutions
we get will be so very complicated (at least compared to choosing a better frame), with both x and
y varying nontrivially with time.
Now lets see what happens when we choose the right (or at least a good) coordinate frame
according to the prescription given. Such a frame is drawn in 11:
As before, we can decompose the forces in this coordinate system, but now we need to nd the
components of the gravitational force as

N = N y is easy! Furthermore, we know that a
y
= 0 and
46
Or rather, by all means give it a try, especially after reviewing my solution.
47
Note that the tangent involves the horizontal distance of the block from the lower apex of the inclined plane,
x
= Lcos() x where x is measured, of course, from the origin.

m
mg
H
L
x
N
y
Figure 11: A good choice of coordinate frame has (say) the x-coordinate lined up with the total
force and hence direction of motion.
hence F
y
= 0.
F
x
= mg sin() = ma
x
(112)
F
y
= N mg cos() = ma
y
= 0 (113)
We can immediately solve the y equation for:
N = mg cos() (114)
and write the equation of motion for the x-direction:
a
x
= g sin() (115)
which is a constant.
From this point on the solution should be familiar since v
y
(0) = 0 and y(0) = 0, y(t) = 0 and
we can ignore y altogether and the problem is now one dimensional! See if you can nd how long
it takes for the block to reach bottom, and how fast it is going when it gets there. You should nd
that v
bottom
=
2gH, a familiar result (see the very rst example of the dropped ball) that suggests
that there is more to learn, that gravity is somehow special if a ball can be dropped or slide down
from a height H and reach the bottom going at the same speed either way!
1.9: Circular Motion
So far, weve solved only two dimensional problems that involved a constant acceleration in some
specic direction. Another very general (and important!) class of motion is circular motion. This
could be: a ball being whirled around on a string, a car rounding a circular curve, a roller coaster
looping-the-loop, a bicycle wheel going round and round, almost anything rotating about a xed
axis has all of the little chunks of mass that make it up going in circles!
Circular motion, as we shall see, is special because the acceleration of a particle moving in a
circle towards the center of the circle has a value that is completely determined by the geometry
of this motion. The form of centripetal acceleration we are about to develop is thus a kinematic
relation not dynamical. It doesnt matter which force(s) or force rule(s) o of the list above
make something actually move around in a circle, the relation is true for all of them. Lets try to
understand this.
v
v
s = r
r
Figure 12: A way to visualize the motion of a particle, e.g. a small ball, moving in a circle of radius r.
We are looking down from above the circle of motion at a particle moving counterclockwise around
the circle. At the moment, at least, the particle is moving at a constant speed v (so that its velocity
is always tangent to the circle.
1.9.1: Tangential Velocity
First, we have to visualize the motion clearly. Figure 12 allows us to see and think about the motion
of a particle moving in a circle of radius r (at a constant speed, although later we can relax this to
instantaneous speed) by visualizing its position at two successive times. The rst position (where the
particle is solid/shaded) we can imagine as occurring at time t. The second position (empty/dashed)
might be the position of the particle a short time later at (say) t + t.
During this time, the particle travels a short distance around the arc of the circle. Because the
length of a circular arc is the radius times the angle subtended by the arc we can see that:
s = r (116)
Note Well! In this and all similar equations must be measured in radians, never degrees. In fact,
angles measured in degrees are fundamentally meaningless, as degrees are an arbitrary partitioning
of the circle. Also note that radians (or degrees, for that matter) are dimensionless they are the
ratio between the length of an arc and the radius of the arc (think 2 is the ratio of the circumference
of a circle to its radius, for example).
The average speed v of the particle is thus this distance divided by the time it took to move it:
v
avg
=
s
t
= r
t
(117)
Of course, we really dont want to use average speed (at least for very long) because the speed might
be varying, so we take the limit that t 0 and turn everything into derivatives, but it is much
easier to draw the pictures and visualize what is going on for a small, nite t:
v = lim
t0
r
t
= r
d
dt
(118)
This speed is directed tangent to the circle of motion (as one can see in the gure) and we will
often refer to it as the tangential velocity. Sometimes Ill even put a little t subscript on it to
emphasize the point, as in:
v
t
= r
d
dt
(119)
but since the velocity is always tangent to the trajectory (which just happens to be circular in this
case) we dont really need it.
In this equation, we see that the speed of the particle at any instant is the radius times the rate
that the angle is being swept out by by the particle per unit time. This latter quantity is a very,
very useful one for describing circular motion, or rotating systems in general. We dene it to be the
angular velocity:
=
d
dt
(120)
Thus:
v = r (121)
or
=
v
r
(122)
are both extremely useful expressions describing the kinematics of circular motion.
1.9.2: Centripetal Acceleration
v = v
v
Figure 13: The velocity of the particle at t and t + t. Note that over a very short time t the
speed of the particle is at least approximately constant, but its direction varies because it always
has to be perpendicular to r, the vector from the center of the circle to the particle. The velocity
swings through the same angle that the particle itself swings through in this (short) time.
Next, we need to think about the velocity of the particle (not just its speed, note well, we have
to think about direction). In gure 13 you can see the velocities from gure 12 at time t and t +t
placed so that they begin at a common origin (remember, you can move a vector anywhere you like
as long as the magnitude and direction are preserved).
The velocity is perpendicular to the vector r from the origin to the particle at any instant of
time. As the particle rotates through an angle , the velocity of the particle also must rotate
through the angle while its magnitude remains (approximately) the same.
In time t, then, the magnitude of the change in the velocity is:
v = v (123)
Consequently, the average magnitude of the acceleration is:
a
avg
=
v
t
= v
t
(124)
As before, we are interested in the instantaneous value of the acceleration, and wed also like
to determine its direction as it is a vector quantity. We therefore take the limit t 0 and
inspect the gure above to note that the direction in that limit is to the left, that is to say in the
negative r direction! (Youll need to look at both gures, the one representing position and the
other representing the velocity, in order to be able to see and understand this.) The instantaneous
magnitude of the acceleration is thus:
a = lim
t0
v
t
= v
d
dt
= v =
v
2
r
= r
2
(125)
where we have substituted equation 122 for (with a bit of algebra) to get the last couple of
equivalent forms. The direction of this vector is towards the center of the circle.
The word centripetal means towards the center, so we call this kinematic acceleration the
centripetal acceleration of a particle moving in a circle and will often label it:
a
c
= v =
v
2
r
= r
2
(126)
A second way you might see this written or referred to is as the r-component of a vector in plane
polar coordinates. In that case towards the center is in the r direction and we could write:
a
r
= v =
v
2
r
= r
2
(127)
In most actual problems, though, it is easiest to just compute the magnitude a
c
and then assign the
direction in terms of the particular coordinate frame you have chosen for the problem, which might
well make towards the center be the positive x direction or something else entirely in your gure
at the instant drawn.
This is an enormously useful result. Note well that it is a kinematic result math with units
not a dynamic result. That is, Ive made no reference whatsoever to forces in the derivations
above; the result is a pure mathematical consequence of motion in a 2 dimensional plane circle,
quite independent of the particular forces that cause that motion. The way to think of it is as
follows:
If a particle is moving in a circle at instantaneous speed v, then its acceleration towards
the center of that circle is v
2
/r (or r
2
if that is easier to use in a given problem).
This species the acceleration in the component of Newtons Second Law that points towards
the center of the circle of motion! No matter what forces act on the particle, if it moves in a circle
the component of the total force acting on it towards the center of the circle must be ma
c
= mv
2
/r.
If the particle is moving in a circle, then the centripetal component of the total force must have
this value, but this quantity isnt itself a force law or rule! There is no such thing as a centripetal
force, although there are many forces that can cause a centripetal acceleration in a particle moving
in circular trajectory.
Let me say it again, with emphasis: A common mistake made by students is to confuse mv
2
/r
with a force rule or law of nature. It is nothing of the sort. No special/new force appears
because of circular motion, the circular motion is caused by the usual forces we list above in some
combination that add up to ma
c
= mv
2
/r in the appropriate direction. Dont make this mistake
one a homework problem, quiz or exam! Think about this a bit and discuss it with your instructor
if it isnt completely clear.
Example 1.9.1: Ball on a String
At the bottom of the trajectory, the tension T in the string points straight up and the force mg
points straight down. No other forces act, so we should choose coordinates such that one axis lines
up with these two forces. Lets use +y vertically up, aligned with the string. Then:
F
y
= T mg = ma
y
= m
v
2
L
(128)
m
mg
L
v
T
Figure 14: A ball of mass m swings down in a circular arc of radius L suspended by a string, arriving
at the bottom with speed v. What is the tension in the string?
or
T = mg +m
v
2
L
(129)
Wow, that was easy! Easy or not, this simple example is a very useful one as it will form part
of the solution to many of the problems you will solve in the next few weeks, so be sure that you
understand it. The net force towards the center of the circle must be algebraically equal to mv
2
/r,
where Ive cleverly given you L as the radius of the circle instead of r just to see if youre paying
attention
48
.
Example 1.9.2: Tether Ball/Conic Pendulum
L
m
r
v
t
Figure 15: Ball on a rope (a tether ball or conical pendulum). The ball sweeps out a right circular
cone at an angle with the vertical when launched appropriately.
Suppose you hit a tether ball (a ball on a string or rope, also called a conic pendulum as the
rope sweeps out a right circular cone) so that it moves in a plane circle at an angle at the end of
a string of length L. Find T (the tension in the string) and v, the speed of the ball such that this
is true.
48
There is actually an important lesson here as well: Read the problem! I cant tell you how often students miss
points because they dont solve the problem given, they solve a problem like the problem given that perhaps was a
class example or on their homework. This is easily avoided by reading the problem carefully and using the variables
and quantities it denes. Read the problem!
We note that if the ball is moving in a circle of radius r = Lsin , its centripetal acceleration
must be a
r
=
v
2
r
. Since the ball is not moving up and down, the vertical forces must cancel. This
suggests that we should use a coordinate system with +y vertically up and x in towards the center
of the circle of motion, but we should bear in mind that we will also be thinking of the motion in
plane polar coordinates in the plane and that the angle is specied relative to the vertical! Oooo,
head aching, must remain calm and visualize, visualize.
Visualization is aided by a good gure, like the one (without coordinates, you can add them) in
gure 15. Note well in this gure that the only real forces acting on the ball are gravity and the
tension T in the string. Thus in the y-direction we have:
F
y
= T cos mg = 0 (130)
and in the x-direction (the minus r-direction, as drawn) we have:
F
x
= T sin = ma
r
=
mv
2
r
. (131)
Thus
T =
mg
cos
, (132)
v
2
=
Tr sin
m
(133)
or
v =
_
gLsin tan (134)
Nobody said all of the answers will be pretty...
1.9.3: Tangential Acceleration
Sometimes we will want to solve problems where a particle speeds up or slows down while moving in a
circle. Obviously, this means that there is a nonzero tangential acceleration changing the magnitude
of the tangential velocity.
Lets write

F (total) acting on a particle moving in a circle in a coordinate system that rotates
along with the particle plane polar coordinates. The tangential direction is the

direction, so we
will get:
F = F
r
r +F
t
(135)
From this we will get two equations of motion (connecting this, at long last, to the dynamics of two
dimensional motion):
F
r
= m
v
2
r
(136)
F
t
= ma
t
= m
dv
dt
(137)
The acceleration on the right hand side of the rst equation is determined from m, v, and r, but v(t)
itself is determined from the second equation. You will use these two equations together to solve the
bead sliding on a wire problem in the next weeks homework assignment, so keep this in mind.
Thats about it for the rst week. We have more to do, but to do it well need more forces.
Next week we move on to learn some more forces from our list, especially friction and drag forces.
Well wrap the weeks work up with a restatement of our solution rubric for standard dynamics
problems. I would recommend literally ticking o the steps in your mind (and maybe on the paper!)
as you work this weeks homework. It will really help you later on!
1.10: Conclusion: Rubric for Newtons Second Law Problems
a) Draw a good picture of what is going on. In general you should probably do this even if one
has been provided for you visualization is key to success in physics.
b) On your drawing (or on a second one) decorate the objects with all of the forces that act on
them, creating a free body diagram for the forces on each object.
c) Write Newtons Second Law for each object (summing the forces and setting the result to
m
i
a
i
for each ith object) and algebraically rearrange it into (vector) dierential equations
of motion (practically speaking, this means solving for or isolating the acceleration a
i
=
d
2
x
i
dt
2
of the particles in the equations of motion).
d) Decompose the 1, 2 or 3 dimensional equations of motion for each object into a set of inde-
pendent 1 dimensional equations of motion for each of the orthogonal coordinates by choosing
a suitable coordinate system (which may not be cartesian, for some problems) and using
trig/geometry. Note that a coordinate here may even wrap around a corner following a
string, for example or we can use a dierent coordinate system for each particle, as long as
we have a known relation between the coordinate systems.
e) Solve the independent 1 dimensional systems for each of the independent orthogonal coor-
dinates chosen, plus any coordinate system constraints or relations. In many problems the
constraints will eliminate one or more degrees of freedom from consideration. Note that in
most nontrivial cases, these solutions will have to be simultaneous solutions, obtained by e.g.
algebraic substitution or elimination.
f) Reconstruct the multidimensional trajectory by adding the vectors components thus obtained
back up (for a common independent variable, time).
g) Answer algebraically any questions requested concerning the resultant trajectory.
Homework for Week 1
Problem 1.
Physics Concepts
In order to solve the following physics problems for homework, you will need to have the following
physics and math concepts rst at hand, then in your long term memory, ready to bring to bear
whenever they are needed. Every week (or day, in a summer course) there will be new ones.
To get them there eciently, you will need to carefully organize what you learn as you go along.
This organized summary will be a standard, graded part of every homework assignment!
Your homework will be graded in two equal parts. Ten points will be given for a complete
crossreferenced summary of the physics concepts used in each of the assigned problems. One problem
will be selected for grading in detail usually one that well-exemplies the material covered that
week for ten more points.
Points will be taken o for egregiously missing concepts or omitted problems in the concept
summary. Dont just name the concepts; if there is an equation and/or diagram associated with the
concept, put that down too. Indicate (by number) all of the homework problems where a concept
was used.
This concept summary will eventually help you prioritize your study and review for exams! To
help you understand what I have in mind, Im building you a list of the concepts for this week, and
indicating the problems that (will) need them as a sort of template, or example. However, Note
Well! You must write up, and hand in, your own version this week as well as all of the other
weeks to get full credit.
In the end, if you put your homework assignments including the summaries for each week into
a three-ring binder as you get them back, you will have a nearly perfect study guide to go over
before all of the exams and the nal. You might want to throw the quizzes and hour exams in as
well, as you get them back. Remember the immortal words of Edmund Burke: Those who dont
know history are destined to repeat it know your own history, by carefully saving, and going
over, your own work throughout this course!
Writing a vector in cartesian coordinates. For example:
A = A
x
x +A
y
y +A
z
z
Used in problems 2,3,4,5,6,7,8,9,10,12
Decomposition of a vector at some angle into components in a (2D) coordinate system. Given
a vector

A with length A at angle with respect to the x-axis:
A
x
= Acos()
A
y
= Asin()
Used in problem 5,6,9,10,11,12
Denition of trajectory, velocity and acceleration of a particle:
The trajectory is the vector x(t), the vector position of the particle as a function of the time.
The velocity of the particle is the (vector) rate at which its position changes as a function of
time, or the time derivative of the trajectory:
v =
x
t
=
dx
dt
The acceleration is the (vector) rate at which its velocity changes as a function of time, or the
time derivative of the velocity:
a =
v
t
=
dv
dt
Used in all problems.
Inertial reference frame
A set of coordinates in which (if you like) the laws of physics that describe the trajectory of
particles take their simplest form. In particular a frame in which Newtons Laws (given below)
hold in a consistent manner. A set of coordinates that is not itself accelerating with respect
to all of the other non-accelerating coordinate frames in which Newtons Laws hold.
Used in all problems (when I choose a coordinate system that is an inertial reference frame).
Newtons First Law
In an inertial reference frame, an object in motion will remain in motion, and an object at rest
will remain at rest, unless acted on by a net force.
If

F = 0, then v is a constant vector.
A consequence, as one can see, of Newtons Second Law. Not used much yet.
Newtons Second Law
In an inertial reference frame, the net vector force on an object equals its mass times its
acceleration.
F = ma
Used in every problem! Very important! Key! Five stars! *****
Newtons Third Law
If one object exerts a force on a second object (along the line connecting the two objects), the
second object exerts an equal and opposite force on the rst.
F
ij
=
F
ji
Not used much yet.
Dierentiating x
n
dx
n
dx
= nx
n1
Not used much yet.
Integrating x
n
dx
_
x
n
dx =
x
n+1
n + 1
Used in every problem where we implicitly use kinematic solutions to constant acceleration to
nd a trajectory.
Problems 2
The force exerted by gravity near the Earths surface
F = mg y
(down).
Used in problems 2,3,4,5,6,8,9,10,11,12
Problems 2
Centripetal acceleration.
a
r
=
v
2
r
Used in problems 11,13
This isnt a perfect example if I were doing this by hand I would have drawn pictures to
accompany, for example, Newtons second and third law, the circular motion acceleration, and so
on.
I also included more concepts than are strictly needed by the problems dont hesitate to add
important concepts to your list even if none of the problems seem to need them! Some concepts
(like that of inertial reference frames) are ideas and underlie problems even when they arent actu-
ally/obviously used in an algebraic way in the solution!
Problem 2.
H
m, v = 0
t = 0
mg
0
A ball of mass m is dropped at time t = 0 from the top of the Duke Chapel (which has height
H) to fall freely under the inuence of gravity.
a) How long does it take for the ball to reach the ground?
b) How fast is it going when it reaches the ground?
To solve this rst problem, be sure that you use the following ritual:
Draw a good gure in this case a chapel tower, the ground, the ball falling. Label the distance
H in the gure, indicate the force on the mass with a vector arrow labelled mg pointing down.
This is called a force diagram (or sometimes a free body diagram). Note well! Solutions without
a gure will lose points!
Choose coordinates! In this case you could (for example) put an origin at the bottom of the
tower with a y-axis going up so that the height of the object is y(t).
Write Newtons second law for the mass.
Transform it into a (dierential) equation of motion. This is the math problem that must be
solved.
In this case, you will want to integrate the constant
dv
y
dt
= a
y
= g to get v
y
(t), then integrate
dy
dt
= v
y
(t)) to get y(t).
Express the algebraic condition that is true when the mass reaches the ground, and solve for
the time it does so, answering the rst question.
Use the answer to the rst question (plus your solutions) to answer the second.
The rst four steps in this solution will nearly always be the same for Newtons Law problems.
Once one has the equation of motion, solving the rest of the problem depends on the force law(s)
in question, and answering the questions requires a bit of insight that only comes from practice. So
practice!
Problem 3.
02
H
01
m
t = 0
m, v = 0
v
A baseball of mass m is dropped at time t = 0 from rest (v
01
= 0) from the top of the Duke
Chapel (which has height H) to fall freely under the inuence of gravity. At the same instant, a
second baseball of mass m is thrown up from the ground directly beneath at a speed v
02
(so that if
the two balls travel far enough, fast enough, they will collide). Neglect drag.
a) Draw a free body diagram for and compute the net force acting on each mass separately.
b) From the equation of motion for each mass, determine their one dimensional trajectory
functions, y
1
(t) and y
2
(t).
c) Sketch a qualitatively correct graph of y
1
(t) and y
2
(t) on the same set of axes in the case where
the two collide before they hit the ground, and draw a second graph of y
1
(t) and y
2
(t) on a
new set of axes in the case where they do not. From your two pictures, determine a criterion
for whether or not the two balls will actually collide before they hit the ground. Express this
criterion as an algebraic expression (inequality) involving H, g, and v
02
.
d) The Duke Chapel is roughly 100 meters high. What (also roughly, you may estimate and dont
need a calculator) is the minimum velocity v
0
2 a the second mass must be thrown up in order
for the two to collide? Note that you should give an actual numerical answer here. What is the
(again approximate, no calculators) answer in miles per hour, assuming that 1 meter/second
9/4 miles per hour? Do you think you can throw a baseball that fast?
Problem 4.
F
mg
m
A model rocket of mass m blasts o vertically from rest at time t = 0 being pushed by an engine
that produces a constant thrust force F (up). The engine blasts away for t
b
seconds and then stops.
Assume that the mass of the rocket remains more or less unchanged during this time, and that the
only forces acting are the thrust and gravity near the earths surface.
a) Find the height y
b
and vertical velocity v
b
that the rocket has reached by the end of the blast
at time t
b
(neglect any drag forces from the air).
b) Find the maximum height y
m
that the rocket reaches. You may want to reset your clock to
be zero at t
b
, solving for v(t
) and y(t
) in terms of the reset clock t
. Your answer may be

expressed in terms of the symbols v
b
and y
b
(which are now initial data for the second part of
the motion after the rocket engine goes o).
c) Find the speed of the rocket as it hits the ground, v
g
(note that this is a magnitude and wont
need the minus sign). You may nd it easiest to express this answer in terms of y
m
.
d) Sketch v(t) and y(t) for the entire time the rocket is in the air. Indicate and label (on both
graphs) t
b
, t
m
(the time the rocket reaches its maximum height) and t
g
(the time it reaches
the ground again).
e) Evaluate the numerical value of your algebraic answers to a-c if m = 0.1 kg, F = 5 N, and
t
b
= 3 seconds. You may use g = 10 m/sec
2
(now and for the rest of the course) for simplicity.
Note that you will probably want to evaluate the numbers piecewise nd y
b
and v
b
, then
put these and the other numbers into your algebraic answer for y
m
, put that answer into your
algebraic answer for v
g
.
Problem 5.
m
R
H
v
0
A cannon sits on a horizontal plain. It res a cannonball of mass m at speed v
0
at an angle
relative to the ground. Find:
a) The maximum height H of the cannonballs trajectory.
b) The time t
a
the cannonball is in the air.
c) The range R of the cannonball.
Questions to discuss in recitation: How does the time the cannonball remains in the air depend on
its maximum height? If the cannon is red at dierent angles and initial speeds, does the cannonballs
with the greatest range always remain in the air the longest? Use the trigonometric identity:
2 sin() cos() = sin(2)
to express your result for the range. For a xed v
0
, how many angles (usually) can you set the
cannon to that will have the same range?
Problem 6.
m
y
max
v
H
R
0
A cannon sits on at the top of a rampart of height (to the mouth of the cannon) H. It res a
cannonball of mass m at speed v
0
at an angle relative to the ground. Find:
a) The maximum height y
max
of the cannonballs trajectory.
b) The time the cannonball is in the air.
c) The range of the cannonball.
Discussion: In your solution to b) above you should have found two times, one of them negative.
What does the negative time correspond to? (Does our mathematical solution know about the
actual prior history of the cannonball?
You might nd the quadratic formula useful in solving this problem. We will be using this a lot
in this course, and on a quiz or exam you wont be given it, so be sure that you really learn it now
in case you dont know or have forgotten it. The roots of a quadratic:
ax
2
+bx +c = 0
are
x =
b
b
2
4ac
2a
You can actually derive this for yourself if you like (it helps you remember it). Just divide the whole
equation by a and complete the square by adding and subtracting the right algebraic quantities,
then factor.
Problem 7.
m
k
eq
x
x
F = kx
A mass m on a frictionless table is connected to a spring with spring constant k (so that the
force on it is F
x
= kx where x is the distance of the mass from its equilibrium postion. It is then
pulled so that the spring is stretched by a distance x from its equilibrium position and at t = 0 is
released.
Write Newtons Second Law and solve for the acceleration. Solve for the acceleration and write
the result as a second order, homogeneous dierential equation of motion for this system.
Discussion in your recitation group: Based on your experience and intuition with masses on
springs, how do you expect the mass to move in time? Since x(t) is not constant, and a is proportional
to x(t), a is a function of time! Do you expect the solution to resemble the kinds of solutions you
derived in constant acceleration problems above at all ?
The moral of this story is that not everything moves under the inuence of a constant force! If the
force/acceleration vary in time, we cannot use e.g. the constant acceleration solution x(t) =
1
2
at
2
!
Yet this is a very common mistake made by intro physics students, often as late as the nal
exam. Try to make sure that you are not one of them!
Problem 8.
m
2
1
m
A mass m
1
is attached to a second mass m
2
by an Acme (massless, unstretchable) string. m
1
sits on a frictionless table; m
2
is hanging over the ends of a table, suspended by the taut string from
an Acme (frictionless, massless) pulley. At time t = 0 both masses are released.
a) Draw the force/free body diagram for this problem.
b) Find the acceleration of the two masses.
c) The tension T in the string.
d) How fast are the two blocks moving when mass m
2
has fallen a height H (assuming that m
1
hasnt yet hit the pulley)?
Discussion: Your answer should look something like: The total unopposed force acting on the
system accelerates both masses. The string just transfers force from one mass to the other so that
they accelerate together! This is a common feature to many problems involving multiple masses and
internal forces, as well see and eventually formalize.
Also, by this point you should be really internalizing the ritual for nding the speed of something
when it has moved some distance while acclerating as in d) above: nd the time it takes to move
the distance, backsubstitute to nd the speed/velocity. We could actually do this once and for all
algebraically for constant accelerations and derive a formula that saves these steps:
v
2
1
v
2
0
= 2ax
However, very soon we will formally eliminate time as a variable altogether from Newtons Second
Law, and the resulting work-energy theorem is a better version of this same result that will work
even for non-constant forces and accelerations (and is the basis of a fundamental law of nature!), so
we wont do this yet.
Problem 9.
m
m
1
2
A mass m
1
2
> m
1
by an Acme (massless, unstretchable) string.
m
1
sits on a frictionless inclined plane at an angle with the horizontal; m
2
is hanging over the
high end of the plane, suspended by the taut string from an Acme (frictionless, massless) pulley. At
time t = 0 both masses are released from rest.
a) Draw the force/free body diagram for this problem.
b) Find the acceleration of the two masses.
c) Find the tension T in the string.
d) How fast are the two blocks moving when mass m
2
has fallen a height H (assuming that m
1
Problem 10.
F
M
m
A block m is sitting on a frictionless inclined block with mass M at an angle
0
as shown. With
what force F should you push on the large block in order that the small block will remain motionless
with respect to the large block and neither slide up nor slide down?
BTW, I made the angle
0
sit in the upper corner just to annoy you and make you actually think
about sines and cosines of angles. This is good for you dont just memorize the trig for an inclined
plane, understand it! Talk about it in your groups until you do!
Problem 11.
v
A tether ball of mass m is suspended by a rope of length L from the top of a pole. A youngster
gives it a whack so that it moves with some speed v in a circle of radius r = Lsin() < L around
the pole.
a) Find an expression for the tension T in the rope as a function of m, g, and .
b) Find an expression for the speed v of the ball as a function of .
Discussion: Why dont you need to use L or v in order to nd the tension T? Once the tension
T is known, how does it constrain the rest of your solution?
By now you should have covered, and understood, the derivation of the True Fact that if a
particle is moving in a circle of radius r, it must have a total acceleration towards the center of
the circle of:
a
c
=
v
2
r
This acceleration (or rather, the acceleration times the mass, ma
c
) is not a force!. The force that
produces this acceleration has to come from the many real forces of nature pushing and pulling on
the object (in this case tension in the string and/or gravity).
Problem 12.
0
v
A researcher aims her tranquiler gun directly at a monkey in a distant tree. Just as she res, the
monkey lets go and drops in free fall towards the ground.
Show that the sleeping dart hits the monkey.
Discussion: There are some unspoken assumptions in this problem. For example, if the gun shoots
the dart too slowly (v
0
too small), what will really happen? Also, real guns re a bullet so fast that
the trajectory is quite at. We must neglect drag forces (discussed next chapter) or the problem
is absurdly dicult and we could not possibly answer it here. Finally and most importantly, real
hunters allow for the drop in their dart/bullet and would aim the gun at a point above the monkey
to hit it if it did not drop (the default assumption).
Be at peace. No monkeys, real or virtual, were harmed in this problem.
Problem 13.
A train engine of mass m is chugging its way around a circular curve of radius R at a constant
speed v. Draw a free body/force diagram for the train engine showing all of the forces acting on it.
Evaluate the total vector force acting on the engine as a function of its speed in a plane perpendicular
to its velocity v.
You may nd the picture above of a trains wheels useful. Note that they are notched so that
they t onto the rails the thin rim of metal that rides on the inside of each rail is essential to the
train being able to go around a curve and stay on a track!
Draw a schematic picture of the wheel and rail in cross-section and draw in the forces using the
force rules we have learned so far that illustrate how a rail can exert both components of the force
needed to hold a train up and curve its trajectory around in a circle.
Discussion: What is the mechanical origin of the force responsible for making the train go in a
curve without coming o of the track (and for that matter, keeping it on the track in the rst place,
even when it is going straight)? What would happen if there were no rim on the trains wheels?
Optional Problems
The following problems are not required or to be handed in, but are provided to give you
some extra things to work on or test yourself with after mastering the required problems and concepts
above and to prepare for quizzes and exams.
No optional problems this week.
94 Week 2: Newtons Laws: Continued
Week 2: Newtons Laws:
Continued
Summary
We now continue our discussion of dynamics and Newtons Laws, adding a few more very important
force rules to our repertoire. So far our idealizations have carefully excluded forces that bring things
to rest as they move, forces that always seem to act to slow things down unless we constantly push
on them. The dissipative forces are, of course, ubiquitous and we cannot aord to ignore them for
long. Wed also like to return to the issue of inertial reference frames and briey discuss the topic
of pseudoforces introduced in the weight in an elevator example above. Naturally, we will also see
many examples of the use of these ideas, and will have to do even more problems for homework to
make them intelligible.
The ideas we will cover include:
Static Friction
49
is the force exerted by one surface on another that acts parallel to the
surfaces to prevent the two surfaces from sliding.
a) Static friction is as large as it needs to be to prevent any sliding motion, up to a maximum
value, at which point the surfaces begin to slide.
b) The maximum force static friction can exert is proportional to both the pressure between
the surfaces and the area in contact. This makes it proportional to the product of the
pressure and the area, which equals the normal force. We write this as:
f
s
f
max
s
=
s
N (138)
where
s
is the coecient of static friction, a dimensionless constant characteristic of
the two surfaces in contact, and N is the normal force.
c) The direction of static friction is parallel to the surfaces in contact and opposes the
component of the dierence between the total force acting on the object in in that plane
it therefore acts to hold the object stationary until the applied force exceeds the maximum
f
max
s
. Note that in general it does not matter which direction the applied force points
in the plane of contact static friction usually acts symmetrically to the right or left,
backwards or forwards and required to hold an object stationary.
Kinetic Friction is the force exerted by one surface on another that is sliding across it.
It, also, acts parallel to the surfaces and opposes the direction of relative motion of the two
surfaces. That is:
49
Wikipedia: http://www.wikipedia.org/wiki/Friction. This article describes some aspects of friction in more detail
than my brief introduction below. The standard model of friction I present is at best an approximate, idealized one.
Wikipedia: http://www.wikipedia.org/wiki/Tribology describes the science of friction and lubrication in more detail.
95
a) The force of kinetic friction is proportional to both the pressure between the surfaces and
the area in contact. This makes it proportional to the product of the pressure and the
area, which equals the normal force. Thus again
f
k
=
k
N (139)
where
k
is the coecient of kinetic friction, a dimensionless constant characteristic
of the two surfaces in contact, and N is the normal force.
Note well that kinetic friction equals
k
N in magnitude, where static friction is whatever
it needs to be to hold the surfaces static up to a maximum of
s
N. This is often a point
of confusion for students when they rst start to solve problems.
b) The direction of kinetic friction is parallel to the surfaces in contact and opposes the
relative direction of the sliding surfaces. That is, if the bottom surface has a velocity
(in any frame) of v
b
and the top frame has a velocity of v
t
= v
b
, the direction of kinetic
friction on the top object is the same as the direction of the vector (v
t
v
b
) = v
b
v
t
.
The bottom surface drags the top one in the (relative) direction it slides, as it were
(and vice versa).
Note well that often the circumstances where you will solve problems involving kinetic
friction will involve a stationary lower surface, e.g. the ground, a xed inclined plane, a
roadway all cases where kinetic friction simply opposes the direction of motion of the
upper object but you will be given enough problems where the lower surface is moving
and dragging the upper one that you should be able to learn to manage them as well.
Drag Force
50
is the frictional force exerted by a uid (liquid or gas) on an object that
moves through it. Like kinetic friction, it always opposes the direction of relative motion of
the object and the medium: drag force equally well describes the force exerted on a car by
the still air it moves through and the force exerted on a stationary car in a wind tunnel.
Drag is an extremely complicated force. It depends on a vast array of things including but not
limited to:
The size of the object.
The shape of the object.
The relative velocity of the object through the uid.
The state of the uid (e.g. its internal turbulence).
The density of the uid.
The viscosity of the uid (we will learn what this is later).
The properties and chemistry of the surface of the object (smooth versus rough, strong
or weak chemical interaction with the uid at the molecular level).
The orientation of the object as it moves through the uid, which may be xed in time
or varying in time (as e.g. an object tumbles).
The long and the short of this is that actually computing drag forces on actual objects moving
through actual uids is a serious job of work for uid engineers and physicists. To obtain
mastery in this, one must rst study for years, although then one can make a lot of money
(and have a lot of fun, I think) working on cars, jets, turbine blades, boats, and many other
things that involve the utilization or minimization of drag forces in important parts of our
society.
To simplify drag forces to where we learn to understand in general how they work, we will use
following idealizations:
50
Wikipedia: http://www.wikipedia.org/wiki/Drag (physics). This article explains a lot of the things we skim over
below, at least in the various links you can follow if you are particularly interested.
a) We will only consider smooth, uniform, nonreactive surfaces of convex, blu objects
(like spheres) or streamlined objects (like rockets or arrows) moving through uniform,
stationary uids where we can ignore or treat separately e.g. bouyant forces.
b) We will wrap up all of our ignorance of the shape and cross-sectional area of the object,
the density and viscosity of the uid, and so on in a single number, b. This dimensioned
number will only be actually computable for certain particularly nice shapes and so
on (see the Wikipedia article on drag linked above) but allows us to treat drag relatively
simply. We will treat drag in two limits:
c) Low velocity, non-turbulent (streamlined, laminar) motion leads to Stokes drag, described
by:
F
d
= bv (140)
This is the simplest sort of drag a drag force directly proportional to the velocity of
(relative) motion of the object through the uid and oppositely directed.
d) High velocity, turbulent (high Reynolds number) drag that is described by a quadratic
dependence on the relative velocity:
F
d
= b|v|v (141)
It is still directed opposite to the relative velocity of the object and the uid but now is
proportional to that velocity squared.
e) In between, drag is a bit of a mess changing over from one from to the other. We will
ignore this transitional region where turbulence is appearing and so on, except to note
that it is there and you should be aware of it.
Pseudoforces in an accelerating frame are gravity-like imaginary forces we must add
to the real forces of nature to get an accurate Newtonian description of motion in a non-
inertial reference frame. In all cases it is possible to solve Newtons Laws without recourse to
pseudoforces (and this is the general approach we promote in this textbook) but it is useful in
a few cases to see how to proceed to solve or formulate a problem using pseudoforces such as
centrifugal force or coriolis force (both arising in a rotating frame) or pseudogravity in a
linearly accelerating frame. In all cases if one tries to solve force equations in an accelerating
frame, one must modify the actual force being exerted on a mass m in an inertial frame by:
F
accelerating
=

F
intertial
ma
frame
(142)
where ma
frame
is the pseudoforce.
This sort of force is easily exemplied indeed, weve already seen such an example in our treatment
of apparent weight in an elevator in the rst week/chapter.
2.1: Friction
So far, our picture of natural forces as being the cause of the acceleration of mass seems fairly
successful. In time it will become second nature to you; you will intuitively connect forces to all
changing velocities. However, our description thus far is fairly simplistic we have massless strings,
frictionless tables, drag-free air. That is, we are neglecting certain well-known and important facts or
forces that appear in real-world problems in order to concentrate on ideal problems that illustrate
the methods simply.
It is time to restore some of the complexity to the problems we solve. The rst thing we will add
is friction.
Experimentally
Applied Force F
Frictional Contact Force
Normal Force
Figure 16: A cartoon picture representing two smooth surfaces in contact when they are highly
magnied. Note the two things that contribute to friction area in actual contact, which regulates
the degree of chemical bonding between the surfaces, and a certain amount of keyholing where
features in one surface t into and are physically locked by features in the other.
a) f
s

s
|N|. The force exerted by static friction is less than or equal to the coecient of static
friction mu
s
times the magnitude of the normal force exerted on the entire (homogeneous)
surface of contact. We will sometimes refer to this maximum possible value of static friction
as f
max
s
=
s
|N|. It opposes the component of any (otherwise net) applied force in the plane
of the surface to make the total force component parallel to the surface zero as long as it is
able to do so (up to this maximum).
b) f
k
=
k
|N|. The force exerted by kinetic friction (produced by two surfaces rubbing against
or sliding across each other in motion) is equal to the coecient of kinetic friction times the
magnitude of the normal force exerted on the entire (homogeneous) surface of contact. It
opposes the direction of the relative motion of the two surfaces.
c)
k
<
s
d)
k
is really a function of the speed v (see discussion on drag forces), but for slow speeds
k
constant and we will idealize it as a constant throughout this book.
e)
s
and
k
depend on the materials in smooth contact, but are independent of contact area.
We can understand this last observation by noting that the frictional force should depend on the
pressure (the normal force/area N/m
2
) and the area in contact. But then
f
k
=
k
P A =
k
N
A
A =
k
N (143)
and we see that the frictional force will depend only on the total force, not the area or pressure
separately.
The idealized force rules themselves, we see, are pretty simple: f
s

s
N and f
k
=
k
N. Lets
see how to apply them in the context of actual problems.
Example 2.1.1: Inclined Plane of Length L with Friction
In gure 17 the problem of a block of mass m released from rest at time t = 0 on a plane of length L
inclined at an angle relative to horizontal is once again given, this time more realistically, including
the eects of friction. The inclusion of friction enables new questions to be asked that require the
m
mg
H
L
x
N
y
f
s,k
Figure 17: Block on inclined plane with both static and dynamic friction. Note that we still use the
coordinate system selected in the version of the problem without friction, with the x-axis aligned
with the inclined plane.
use of your knowledge of both the properties and the formulas that make up the friction force rules
to answer, such as:
a) At what angle
c
does the block barely overcome the force of static friction and slide down the
incline.?
b) Started at rest from an angle >
c
(so it denitely slides), how fast will the block be going
when it reaches the bottom?
To answer the rst question, we note that static friction exerts as much force as necessary to
keep the block at rest up to the maximum it can exert, f
max
s
=
s
N. We therefore decompose the
known force rules into x and y components, sum them componentwise, write Newtons Second Law
for both vector components and nally use our prior knowledge that the system remains in static
force equilibrium to set a
x
= a
y
= 0. We get:
F
x
= mg sin() f
s
= 0 (144)
(for
c
and v(0) = 0) and
F
y
= N mg cos() = 0 (145)
So far, f
s
is precisely what it needs to be to prevent motion:
f
s
= mg sin() (146)
while
N = mg cos() (147)
is true at any angle, moving or not moving, from the F
y
equation
51
.
You can see that as one gradually and gently increases the angle , the force that must be exerted
by static friction to keep the block in static force equilibrium increases as well. At the same time, the
51
Here again is an appeal to experience and intuition we know that masses placed on inclines under the inuence
of gravity generally do not jump up o of the incline or sink into the (solid) incline, so their acceleration in the
perpendicular direction is, from sheer common sense, zero. Proving this in terms of microscopic interactions would
be absurdly dicult (although in principle possible) but as long as we keep our wits about ourselves we dont have
to!
normal force exerted by the plane decreases (and hence the maximum force static friction can exert
decreases as well. The critical angle is the angle where these two meet; where f
s
is as large as it can
be such that the block barely doesnt slide (or barely starts to slide, as you wish at the boundary
the slightest uctuation in the total force suces to trigger sliding). To nd it, we can substitute
f
max
s
=
s
N
c
where N
c
= mg cos(
c
) into both equations, so that the rst equation becomes:
F
x
= mg sin(
c
)
s
mg cos(
c
) = 0 (148)
at
c
. Solving for
c
, we get:
c
= tan
1
(
s
) (149)
Once it is moving (either at an angle >
c
or at a smaller angle than this but with the initial
condition v
x
(0) > 0, giving it an initial push down the incline) then the block will (probably)
accelerate and Newtons Second Law becomes:
F
x
= mg sin()
k
mg cos() = ma
x
(150)
which we can solve for the constant acceleration of the block down the incline:
a
x
= g sin()
k
g cos() = g(sin()
k
cos()) (151)
Given a
x
, it is now straightforward to answer the second question above (or any of a number of
others) using the methods exemplied in the rst week/chapter. For example, we can integrate twice
and nd v
x
(t) and x(t), use the latter to nd the time it takes to reach the bottom, and substitute
that time into the former to nd the speed at the bottom of the incline. Try this on your own, and
get help if it isnt (by now) pretty easy.
Other things you might think about: Suppose that you started the block at the top of an incline
at an angle less than
c
but at an initial speed v
x
(0) = v
0
. In that case, it might well be the case that
f
k
> mg sin() and the block would slide down the incline slowing down. An interesting question
might then be: Given the angle,
k
, L and v
0
, does the block come to rest before it reaches the
bottom of the incline? Does the answer depend on m or g? Think about how you might formulate
and answer this question in terms of the givens.
Example 2.1.2: Block Hanging o of a Table
s,k
f
m
1
m
1
g
2
m
2
m g
+x
+x
+y
+y
N
T
T
Figure 18: Atwoods machine, sort of, with one block resting on a table with friction and the other
dangling over the side being pulled down by gravity near the Earths surface. Note that we should use
an around the corner coordinate system as shown, since a
1
= a
2
= a if the string is unstretchable.
Suppose a block of mass m
1
sits on a table. The coecients of static and kinetic friction between
the block and the table are
s
>
k
and
k
respectively. This block is attached by an ideal
massless unstretchable string running over an ideal massless frictionless pulley to a block of mass
m
2
hanging o of the table as shown in gure 18. The blocks are released from rest at time t = 0.
Possible questions include:
a) What is the largest that m
2
can be before the system starts to move, in terms of the givens
and knowns (m
1
, g,
k
,
s
...)?
b) Find this largest m
2
if m
1
= 10 kg and
s
= 0.4.
c) Describe the subsequent motion (nd a, v(t), the displacement of either block x(t) from its
starting position). What is the tension T in the string while they are stationary?
d) Suppose that m
2
= 5 kg and
k
= 0.3. How fast are the masses moving after m
2
has fallen
one meter? What is the tension T in the string while they are moving?
Note that this is the rst example you have been given with actual numbers. They are there to
tempt you to use your calculators to solve the problem. Do not do this! Solve both of these problems
algebraically and only at the very end, with the full algebraic answers obtained and dimensionally
checked, consider substituting in the numbers where they are given to get a numerical answer. In
most of the rare cases you are given a problem with actual numbers in this book, they will be simple
enough that you shouldnt need a calculator to answer them! Note well that the right number answer
is worth very little in this course I assume that all of you can, if your lives (or the lives of others
for those of you who plan to go on to be physicians or aerospace engineers) depend on it, can punch
numbers into a calculator correctly. This course is intended to teach you how to correctly obtain
the algebraic expression that you need to numerically evaluate, not drill you in calculator skills
52
.
We start by noting that, like Atwoods Machine and one of the homework problems from the
rst week, this system is eectively one dimensional, where the string and pulley serve to bend
the contact force between the blocks around the corner without loss of magnitude. I crudely draw
such a coordinate frame into the gure, but bear in mind that it is really lined up with the string.
The important thing is that the displacement of both blocks from their initial position is the same,
and neither block moves perpendicular to x in their (local) y direction.
At this point the ritual should be quite familiar. For the rst (static force equilibrium) problem
we write Newtons Second Law with a
x
= a
y
= 0 for both masses and use static friction to describe
the frictional force on m
1
:
F
x1
= T f
s
= 0
F
y1
= N m
1
g = 0
F
x2
= m
2
g T = 0
F
y2
= 0 (152)
From the second equation, N = m
1
g. At the point where m
2
is the largest it can be (given m
1
and
so on) f
s
= f
max
s
=
s
N =
s
m
1
g. If we substitute this in and add the two x equations, the T
cancels and we get:
m
max
2
g
s
m
1
g = 0 (153)
Thus
m
max
2
=
s
m
1
(154)
52
Indeed, numbers are used as rarely as they are to break you of the bad habit of thinking that a calculator, or
computer, is capable of doing your intuitive and formal algebraic reasoning for you, and are only included from time
to time to give you a feel for what reasonable numbers are for describing everyday things.
which (if you think about it) makes both dimensional and physical sense. In terms of the given
numbers, m
2
> mu
s
m
1
= 4 kg is enough so that the weight of the second mass will make the whole
system move. Note that the tension T = m
2
g = 40 Newtons, from F
x2
(now that we know m
2
).
Similarly, in the second pair of questions m
2
is larger than this minimum, so m
1
will slide to the
right as m
2
falls. We will have to solve Newtons Second Law for both masses in order to obtain the
non-zero acceleration to the right and down, respectively:
F
x1
= T f
k
= m
1
a
F
y1
= N m
1
g = 0
F
x2
= m
2
g T = m
2
a
F
y2
= 0 (155)
If we substitute the xed value for f
k
=
k
N =
k
m
1
g and then add the two x equations once
again (using the fact that both masses have the same acceleration because the string is unstretchable
as noted in our original construction of round-the-corner coordinates), the tension T cancels and we
get:
m
2
g
k
m
1
g = (m
1
+m
2
)a (156)
or
a =
m
2
k
m
1
m
1
+m
2
g (157)
is the constant acceleration.
This makes sense! The string forms an internal force not unlike the molecular forces that glue
the many tiny components of each block together. As long as the two move together, these internal
forces do not contribute to the collective motion of the system any more than you can pick yourself
up by your own shoestrings! The net force along x is just the weight of m
2
pulling one way, and
the force of kinetic friction pulling the other. The sum of these two forces equals the total mass
times the acceleration!
Solving for v(t) and x(t) (for either block) should now be easy and familiar. So should nding
the time it takes for the blocks to move one meter, and substituting this time into v(t) to nd out
how fast they are moving at this time. Finally, one can substitute a into either of the two equations
of motion involving T and solve for T. In general you should nd that T is less than the weight of
the second mass, so that the net force on this mass is not zero and accelerates it downward. The
tension T can never be negative (as drawn) because strings can never push an object, only pull.
Basically, we are done. We know (or can easily compute) anything that can be known about this
system.
Example 2.1.3: Find The Minimum No-Skid Braking Distance for a Car
One of the most important everyday applications of our knowledge of static versus kinetic friction is
in anti-lock brake systems (ABS)
53
ABS brakes are implemented in every car sold in the European
Union (since 2007) and are standard equipment in almost every car sold in the United States, where
for reasons known only to congress it has yet to be formally mandated. This is in spite of the fact
that road tests show that on average, stopping distances for ABS-equipped cars are some 18 to 35%
shorter than non-ABS equipped cars, for all but the most skilled drivers (who still nd it dicult
to actually beat ABS stopping distances but who can equal them).
One small part of the reason may be that ABS braking feels strange as the car pumps the
brakes for you 10-16 times per second, making it pulse as it stops. This causes drivers unprepared
53
Wikipedia: http://www.wikipedia.org/wiki/Anti-lock Braking System.
s
f
0
v
mg
N
f
0
v
mg
N
k
s
k
a)
b)
D
D
Figure 19: Stopping a car with and without locking the brakes and skidding. The coordinate system
(not drawn) is x parallel to the ground, y perpendicular to the ground, and the origin in both cases
is at the point where the car begins braking. In panel a), the anti-lock brakes do not lock and the
car is stopped with the maximum force of static friction. In panel b) the brakes lock and the car
skids to a stop, slowed by kinetic/sliding friction.
for the feeling to back o of the brake pedal and not take full advantage of the ABS feature, but of
course the simpler and better solution is for drivers to educate themselves on the feel of anti-lock
brakes in action under safe and controlled conditions and then trust them.
This problem is designed to help you understand why ABS-equipped cars are better (safer)
than non-ABS-equipped cars, and why you should rely on them to help you stop a car in the
minimum possible distance. We achieve this by answer the following questions:
Find the minimum braking distance of a car travelling at speed v
0
30 m/sec running on tires
with
s
= 0.5 and
k
= 0.3:
a) equipped with ABS such that the tires do not skid, but rather roll (so that they exert the
maximum static friction only);
b) the same car, but without ABS and with the wheels locked in a skid (kinetic friction only)
c) Evaluate these distances for v
0
= 30 meters/second ( 67 mph), and both for
s
= 0.8,
k
= 0.7 (reasonable values, actually, for good tires on dry pavement) and for
s
= 0.7,
k
= 0.3 (not unreasonable values for wet pavement). The latter are, however, highly variable,
depending on the kind and conditions of the treads on your car (which provide channels for
water to be displaced as a thin lm of water beneath the treads lubricates the point of contact
between the tire and the road. With luck they will teach you why you should slow down and
allow the distance between your vehicle and the next one to stretch out when driving in wet,
snowy, or icy conditions.
To answer all of these questions, it suces to evalute the acceleration of the car given either
f
max
s
=
s
N =
s
mg (for a car being stopped by peak static friction via ABS) and f
k
=
k
N =
k
mg. In both cases we use Newtons Law in the x-direction to nd a
x
:
x
F
x
=
(s,k)
N = ma
x
(158)
y
F
y
= N mg = ma
y
= 0 (159)
(where
s
is for static friction and
k
is for kinetic friction), or:
ma
x
=
(s,k)
mg (160)
so
a
x
=
(s,k)
g (161)
which is a constant.
We can then easily determine how long a distance D is required to make the car come to rest.
We do this by nding the stopping time t
s
from:
v
x
(t
s
) = 0 = v
0
(s,k)
gt
s
(162)
or:
t
s
=
v
0
(s,k)
g
(163)
and using it to evaluate:
D
(s,k)
= x(t
s
) =
1
2
(s,k)
gt
2
s
+v
0
t
s
(164)
I will leave the actual completion of the problem up to you, because doing these last few steps four
times will provide you with a valuable lesson that we will exploit shortly to motivate learing about
energy, which will permit us to answer questions like this without always having to nd times as
intermediate algebraic steps.
Note well! The answers you obtain for D (if correctly computed) are reasonable! That is, yes,
it can easily take you order of 100 meters to stop your car with an initial speed of 30 meters per
second, and this doesnt even allow for e.g. reaction time. Anything that shortens this distance
makes it easier to survive an emergency situation, such as avoiding a deer that appears in the
middle of the road in front of you at night.
Example 2.1.4: Car Rounding a Banked Curve with Friction
N
mg
R
+x
+y
f
s
Figure 20: Friction and the normal force conspire to accelerate car towards the center of the circle
in which it moves, together with the best coordinate system to use one with one axis pointing in
the direction of actual acceleration. Be sure to choose the right coordinates for this problem!
A car of mass m is rounding a circular curve of radius R banked at an angle relative to the
horizontal. The car is travelling at speed v (say, into the page in gure 20 above). The coecient
of static friction between the cars tires and the road is
s
. Find:
a) The normal force exerted by the road on the car.
b) The force of static friction exerted by the road on the tires.
c) The range of speeds for which the car can round the curve successfully (without sliding up or
down the incline).
Note that we dont know f
s
, but we are certain that it must be less than or equal to
s
N in
order for the car to successfully round the curve (the third question). To be able to formulate the
range problem, though, we have to nd the normal force (in terms of the other/given quantities and
the force exerted by static friction (in terms of the other quantities), so we start with that.
As always, the only thing we really know is our dynamical principle Newtons Second Law
plus our knowledge of the force rules involved plus our experience and intuition, which turn out to
be crucial in setting up this problem.
For example, what direction should f
s
point? Imagine that the inclined roadway is coated with
frictionless ice and the car is sitting on it (almost) at rest (for a nite but tiny v 0). What
will happen (if
s
=
k
= 0)? Well, obviously it will slide down the hill which doesnt qualify as
rounding the curve at a constant height on the incline. Now imagine that the car is travelling at
an enormous v; what will happen? The car will skid o of the road to the outside, of course. We
know (and fear!) that from our own experience rounding curves too fast.
We now have two dierent limiting behaviors in the rst case, to round the curve friction has
to keep the car from sliding down at low speeds and hence must point up the incline; in the second
case, to round the curve friction has to point down to keep the car from skidding up and o of the
road.
We have little choice but to pick one of these two possibilities, solve the problem for that possi-
bility, and then solve it again for the other (which should be as simple as changing the sign of f
s
in
the algebra. I therefore arbitrarily picked f
s
pointing down (and parallel to, remember) the incline,
which will eventually give us the upper limit on the speed v with which we can round the curve.
As always we use coordinates lined up with the eventual direction of

F
tot
and the actual
acceleration of the car: +x parallel to the ground (and the plane of the circle of movement with
radius R).
We write Newtons second law:
x
F
x
= N sin +f
s
cos = ma
x
=
mv
2
R
(165)
y
F
y
= N cos mg f
s
sin = ma
y
= 0 (166)
(where so far f
s
is not its maximum value, it is merely whatever it needs to be to make the car
round the curve for a v presumed to be in range) and solve the y equation for N:
N =
mg +f
s
sin
cos
(167)
substitute into the x equation:
(mg +f
s
sin ) tan +f
s
cos =
mv
2
R
(168)
and nally solve for f
s
:
f
s
=
mv
2
R
mg tan
sin tan + cos
(169)
From this we see that if
mv
2
R
> mg tan (170)
or
v
2
Rg
> tan (171)
then f
s
is positive (down the incline), otherwise it is negative (up the incline). When
v
2
Rg
= tan ,
f
s
= 0 and the car would round the curve even on ice (as you determined in a previous homework
problem).
See if you can use your knowledge of the algebraic form for f
max
s
to determine the range of v
given
s
that will permit the car to round the curve. Its a bit tricky! You may have to go back
a couple of steps and nd N
max
(the N associated with f
max
s
) and f
max
s
in terms of that N at the
same time, because both N and f
s
depend, in the end, on v...
2.2: Drag Forces
Pressure increase
viscous friction
turbulence
Pressure decrease
d
F
v
Figure 21: A cartoon illustrating the dierential force on an object moving through a uid. The
drag force is associated with a dierential pressure where the pressure on the side facing into the
wind of its passage is higher than the pressure of the trailing/lee side, plus a dynamic frictional
force that comes from the uid rubbing on the sides of the object as it passes. In very crude terms,
the former is proportional to the cross-sectional area; the latter is proportional to the surface area
exposed to the ow. However, the details of even this simple model, alas, are enormously complex.
As we will discuss later in more detail in the week that we cover uids, when an object is sitting
at rest in a uid at rest with a uniform temperature, pressure and density, the uid around it presses
on it, on average, equally on all sides
54
.
Basically, the molecules of the uid on one side of the object hit it, on average, with as much
force per unit area area as molecules on the other side and the total cross-sectional area of the object
seen from any given direction or the opposite of that direction is the same. By the time one works
out all of the vector components and integrates the force component along any line over the whole
surface area of the object, the force cancels. This makes sense the whole system is in average
static force equilibrium and we dont expect a tree to bend in the wind when there is no wind!
When the same object is moving with respect to the uid (or the uid is moving with respect to
the object, i.e. there is a wind in the case of air) then we empirically observe that a friction-like
force is exerted on the object (and back on the uid) called drag
55
.
We can make up at least an heuristic description of this force that permits us to intuitively reason
about it. As an object moves through a uid, one expects that the molecules of the uid will hit
54
We are ignoring variations with bulk uid density and pressure in e.g. a gravitational eld in this idealized
statement; later we will see how the eld gradient gives rise to buoyancy through Archimedes Principle. However,
lateral forces perpendicular to the gravitational eld and pressure gradient still cancel even then.
55
Wikipedia: http://www.wikipedia.org/wiki/Drag (physics). This is a nice summary and well worth at least glanc-
ing at to take note of the gure at the top illustrating the progression from laminar ow and skin friction to highly
turbulent ow and pure form drag.
on the side facing the direction of motion harder, on the average, then molecules on the other side.
Even though we will delay our formal treatment of uid pressure until later, we should all be able
to understand that these stronger collisions correspond (on average) to a greater pressure on the
side of the object moving against the uid or vice versa, and a lower pressure in the turbulent ow
on the far side, where the object is moving away from the chasing and disarranged molecules of
uid. This pressure-linked drag force we might expect to be proportional to the cross-sectional area
of the object perpendicular to its direction of relative motion through the uid and is called form
drag to indicate its strong dependence on the shape of the object.
However, the uid that ows over the sides of the object also tends to stick to the surface of
the object because of molecular interactions that occur during the instant of the molecular collision
between the uid and the surface. These collisions exert transverse frictional forces that tend to
speed up the recoiling air molecules in the direction of motion of the object and slow the object down.
The interactions can be strong enough to actually freeze a thin layer called the boundary layer of
the uid right up next to the object so that the frictional forces are transmitted through successive
layers of uid owing and dierent speeds relative to the object. This sort of ow in layers is often
called laminar (layered) ow and the frictional force exerted on the object transmitted through the
rubbing of the layers on the sides of the object as it passes through the uid is called skin friction
or laminar drag.
Note well: When an object is enlongated and passes through a uid parallel to its long axis
with a comparatively small forward-facing cross section compared to its total area, we say that it is
a streamlined object as the uid tends to pass over it in laminar ow. A streamlined object will
often have its total drag dominated by skin friction. A blu object, in contrast has a comparatively
large cross-sectional surface facing forward and will usually have the total drag dominated by form
drag. Note that a single object, such as an arrow or piece of paper, can often be streamlined moving
through the uid one way and blu another way or be crumpled into a dierent shape with any mix
in between. A sphere is considered to be a blu body, dominated by form drag.
Unfortunately, this is only the beginning of an heuristic description of drag. Drag is a very
complicated force, especially when the object isnt smooth or convex but is rather rough and
irregularly shaped, or when the uid through which it moves is not in an ideal state to begin with,
when the object itself tumbles as it moves through the uid causing the drag force to constantly
change form and magnitude. Flow over dierent parts of a single object can be laminar here, or
turbulent there (with portions of the uid left spinning in whirlpool-like eddies in the wake of the
object after it passes).
The full Newtonian description of a moving uid is given by the Navier-Stokes equation
56
which is too hard for us to even look at.
We will therefore need to idealize; learn a few nearly universal heuristic rules that we can use to
conceptually understand uid ow for at least simple, smooth, convex geometries.
It would be nice, perhaps, to be able to skip all of this but we cant, not even for future physicians
as opposed to future engineers, physicists or mathematicians. As it happens, the body contains at
least two major systems of uid ow the vasculature and the lymphatic system as well as
numerous minor ones (the renal system, various sexual systems, even much of the digestive system
is at least partly a uid transport problem). Drag forces play a critical role in understanding blood
pressure, heart disease, and lots of other stu. Sorry, my beloved students, you gotta learn it at
least well enough to qualitatively and semi-quantitatively understand it.
56
Wikipedia: http://www.wikipedia.org/wiki/Navier-Stokes Equation. A partial dierential way, way beyond the
scope of this course. To give you an idea of how dicult the Navier-Stokes equation is to solve (in all but a few
relatively simple geometries) simply demonstrating that solutions to it always exist and are smooth is one of the seven
most important questions in mathematics and you could win a million dollar prize if you were to demonstrate it (or
oer a proven counterexample).
Besides, this section is the key to understanding how to at least in principle fall out of an airplane
without a parachute and survive. Drag forces signicantly modify the idealized trajectory functions
we derived in week 1, so much so that anyone relying on them to aim a cannon would almost certainly
consistently miss any target they aimed at using the idealized no-drag trajectories.
Drag is an extremely complicated force. It depends on a vast array of things including but not
limited to:
The size of the object.
The shape of the object.
The relative velocity of the object through the uid.
The state of the uid (e.g. its velocity eld including any internal turbulence).
The density of the uid.
The viscosity of the uid (we will learn what this is later).
The properties and chemistry of the surface of the object (smooth versus rough, strong or
weak chemical interaction with the uid at the molecular level).
The orientation of the object as it moves through the uid, which may be xed in time
(streamlined versus blu motion) or varying in time (as, for example, an irregularly shaped
object tumbles).
To eliminate most of this complexity and end up with force rules that will often be quanti-
tatively predictive we will use a number of idealizations. We will only consider smooth, uniform,
nonreactive surfaces of convex blu objects (like spheres) or streamlined objects (like rockets or
arrows) moving through uniform, stationary uids where we can ignore or treat separately the other
non-drag (e.g. buoyant) forces acting on the object.
There are two dominant contributions to drag for objects of this sort.
The rst, as noted above, is form drag the dierence in pressure times projective area between
the front of an object and the rear of an object. It is strongly dependent on both the shape and
orientation of an object and requires at least some turbulence in the trailing wake in order to occur.
The second is skin friction, the friction-like force resulting from the uid rubbing across the
skin at right angles in laminar ow.
In this course, we will wrap up all of our ignorance of the shape and cross-sectional area of the
object, the density and viscosity of the uid, and so on into a single number: b. This (dimensioned)
number will only be actually computable for certain particularly nice shapes, but it allows us to
understand drag qualitatively and treat drag semi-quantitatively relatively simply in two important
limits.
2.2.1: Stokes, or Laminar Drag
The rst is when the object is moving through the uid relatively slowly and/or is arrow-shaped or
rocket-ship-shaped so that streamlined laminar drag (skin friction) is dominant. In this case there
is relatively little form drag, and in particular, there is little or no turbulence eddies of uid
spinning around an axis in the wake of the object as the presence of turbulence (which we will
discuss in more detail later when we consider uid dynamics) breaks up laminar ow.
This low-velocity, streamlined skin friction drag is technically named Stokes drag (as Stokes
was the rst to derive it as a particular limit of the Navier-Stokes equation for a sphere moving
through a uid) or laminar drag and has the idealized force rule:
F
d
= b
l
v (172)
This is the simplest sort of drag a drag force directly proportional to the velocity of relative
motion of the object through the uid and oppositely directed.
Stokes derived the following relation for the dimensioned number b
l
(the laminar drag coecient)
that appears in this equation for a sphere of radius R:
b
l
= 6R (173)
where is the dynamical viscosity. Dierent objects will have dierent laminar drag coecients b
l
,
and in general it will be used as a simple given parameter in any problem involving Stokes drag.
Sadly sadly because Stokes drag is remarkably mathematically tractable compared to e.g.
turbulent drag below spheres experience pure Stokes drag only when they are very small or
moving very slowly through the uid. To given you an idea of how slowly a sphere moving at
1 meter per second through water would have to be on the order of one micron (a millionth of a
meter) in size in order to experience predominantly laminar/Stokes drag. Equivalently, a sphere a
meter in diameter would need to be moving at a micron per second. This is a force that is relevant
for bacteria or red blood cells moving in water, but not too relevant to baseballs.
It becomes more relevant for streamlined objects objects whose length along the direction of
motion greatly exceeds the characteristic length of the cross-sectional area perpendicular to this
direction. We will therefore still nd it useful to solve a few problems involving Stokes drag as it
will be highly relevant to our eventual studies of harmonic oscillation and is not irrelevant to the
ow of blood in blood vessels.
2.2.2: Rayleigh, or Turbulent Drag
On the other hand, if one moves an object through a uid too fast where the actual speed depends
in detail on the actual size and shape of the object, how blu or streamlined it is pressure builds
up on the leading surface and turbulence
57
appears in its trailing wake in the uid (as illustrated
in gure 21 above) when the Reynolds number R
e
of the relative motion (which is a function of the
relative velocity, the kinetic viscosity, and the characteristic length of the object) exceeds a critical
threshold. Again, we will learn more about this (and perhaps dene the Reynolds number) later
for the moment it suces to know that most macroscopic objects moving through water or air at
reasonable velocities experience turbulent drag, not Stokes drag.
This high velocity, turbulent drag exerts a force described by a quadratic dependence on the
relative velocity due to Lord Rayleigh:
F
d
=
1
2
C
d
A|v|v = b
t
|v|v (174)
It is still directed opposite to the relative velocity of the object and the uid but now is
proportional to that velocity squared. In this formula is the density of the uid through which
the object moves (so denser uids exert more drag as one would expect) and A is the cross-sectional
area of the object perpendicular to the direction of motion, also known as the orthographic projection
of the object on any plane perpendicular to the motion. For example, for a sphere of radius R, the
orthographic projection is a circle of radius R and the area A = R
2
.
57
Wikipedia: http://www.wikipedia.org/wiki/Turbulence. Turbulence eddies spun out in the uid as it moves o
of the surface passing throughout it is arguably the single most complex phenomenon physics attempts to describe,
dwarng even things like quantum eld theory in its diculty. We can see a great deal of structure in it, but that
structure is fundamentally chaotic and hence subject to things like the buttery eect. In the end it is very dicult
to compute except in certain limiting and idealized cases.
The number C
d
is called the drag coecient and is a dimensionless number that depends on
relative speed, ow direction, object position, object size, uid viscosity and uid density. In other
words, the expression above is only valid in certain domains of all of these properties where C
d
is
slowly varying and can be thought of as a constant! Hence we can say that for a sphere moving
through still air at speeds where turbulent drag is dominant it is around 0.47 0.5, or:
b
t

1
4
R
2
(175)
which one can compare to b
l
= 6R for the Stokes drag of the same sphere, moving much slower.
To get a feel for non-spherical objects, blu convex objects like potatoes or cars or people have
drag coecients close to but a bit more or less than 0.5, while highly blu objects might have a drag
coecient over 1.0 and truly streamlined objects might have a drag coecient as low as 0.04.
As one can see, the functional complexity of the actual non-constant drag coecient C
d
even
for such a simple object as a sphere has to manage the entire transition from laminar drag force for
low velocities/Reynolds numbers to turbulent drag for high velocites/Reynolds numbers, so that at
speeds in between the drag force is at best a function of a non-integer power of v in between 1 and
2 or some arcane mixture of form drag and skin friction. We will pretty much ignore this transition.
It is just too damned dicult for us to mess with, although you should certainly be aware that it is
there.
You can see that in our actual expression for the drag force above, as promised, we have simplied
things even more and express all of this dependence , , size and shape and more wrapped
up in the turbulent dimensioned constant b
t
, which one can think of as an overall turbulent drag
coecient that plays the same general role as the laminar drag coecient b
l
we similarly dened
above. However, it is impossible for the heuristic descriptors b
l
and b
t
to be the same for Stokes
and turbulent drag they dont even have the same units and for most objects most of the time
the total drag is some sort of mixture of these limiting forces, with one or the other (probably)
dominant.
As you can see, drag forces are complicated! In the end, they turn out to be most useful (to us)
as heuristic rules with drag coecients b
l
or b
t
given so that we can see what we can reasonably
compute or estimate in these limits.
2.2.3: Terminal velocity
mg
F
d
v
Figure 22: A simple object falling through a uid experiences a drag force that increasingly cancels
the force of gravity as the object accelerates until a terminal velocity v
t
is asymptotically reached.
For blu objects such as spheres, the F
d
= bv
2
force rule is usually appropriate.
One immediate consequence of this is that objects dropped in a gravitational eld in uids such
as air or water do not just keep speeding up ad innitum. When they are dropped from rest, at rst
their speed is very low and drag forces may well be negligible
58
. The gravitational force accelerates
them downward and their speed gradually increases.
As it increases, however, the drag force in all cases increases as well. For many objects the drag
forces will quickly transition over to turbulent drag, with a drag force magnitude of b
t
v
2
. For others,
the drag force may remain Stokes drag, with a drag force magnitude of b
l
v (in both cases opposing
the directioin of motion through the uid). Eventually, the drag force will balance the gravitational
force and the object will no longer accelerate. It will fall instead at a constant speed. This speed is
called the terminal velocity.
It is extremely easy to compute the terminal velocity for a falling object, given the form of its
drag force rule. It is the velocity where the net force on the object vanishes. If we choose a coordinate
system with down being e.g. x positive (so gravity and the velocity are both positive pointing
down) we can write either:
mg b
l
v
t
= ma
x
= 0 or
v
t
=
mg
b
l
(176)
(for Stokes drag) or
mg b
t
v
2
t
= ma
x
= 0 and
v
t
=
_
mg
b
t
(177)
for turbulent drag.
We expect v
x
(t) to asymptotically approach v
t
with time. Rather than draw a generic asymptotic
curve (which is easy enough, just start with the slope of v being g and bend the curve over to smoothly
approach v
t
), we will go ahead and see how to solve the equations of motion for at least the two
limiting (and common) cases of Stokes and turbulent drag.
The entire complicated set of drag formulas above can be reduced to the following rule of thumb
that applies to objects of water-like density that have sizes such that turbulent drag determines their
terminal velocity raindrops, hail, live animals (including humans) falling in air just above sea level
near the surface of the Earth. In this case terminal velocity is roughly equal to
v
t
= 90
d (178)
where d is the characteristic size of the object in meters.
For a human body d 0.6 so v
t
70 meters per second or 156 miles per hour. However, if one
falls in a blu position, one can reduce this to anywhere from 40 to 55 meters per second, say 90 to
120 miles per hour.
Note that the characteristic size of a small animal such as a squirrel or a cat might be 0.05
(squirrel) to 0.1 (cat). Terminal velocity for a cat is around 28 meters per second, lower if the cat
falls in a blu position (say, 50 to 60 mph) and for a squirrel in a blu position it might be as low
as 10 to 20 mph. Smaller animals especially ones with large bushy tails or skin webs like those
observed in the ying squirrel
59
have a much lower terminal velocity than (say) humans and hence
have a much better chance of survival. One rather imagines that this provided a direct evolutionary
path to actual ight for small animals that lived relatively high above the ground in arboreal niches.
58
In air and other low viscosity, low density compressible gases they probably are; in water or other viscous, dense,
incompressible liquids they may not be.
59
Wikipedia: http://www.wikipedia.org/wiki/Flying Squirrel. A ying squirrel doesnt really y rather it skydives
in a highly blu position so that it can glide long transverse distances and land with a very low terminal velocity.
Example 2.2.1: Falling From a Plane and Surviving
As noted above, the terminal velocity for humans in free fall near the Earths surface is (give or
take, depending on whether you are falling in a streamlined swan dive or falling in a blu skydivers
belly op position) anywhere from 40 to 70 meters per second (90-155 miles per hour). Amazingly,
humans can survive
60
collisions at this speed.
The trick is to fall into something soft and springy that gradually slows you from high speed
to zero without ever causing the deceleration force to exceed 100 times your weight, applied as
uniformly as possible to parts of your body you can live without such as your legs (where your odds
go up the smalller this multiplier is, of course). It is pretty simple to gure out what kinds of things
might do.
Suppose you fall from a large height (long enough to reach terminal velocity) to hit a haystack
of height H that exerts a nice, uniform force to slow you down all the way to the ground, smoothly
compressing under you as you fall. In that case, your initial velocity at the top is v
t
, down. In order
to stop you before y = 0 (the ground) you have to have a net acceleration a such that:
v(t
g
) = 0 = v
t
at
g
(179)
y(t
g
) = 0 = H v
t
t
g
1
2
at
2
g
(180)
If we solve the rst equation for t
g
(something we have done many times now) and substitute it into
the second and solve for the magnitude of a, we will get:
v
2
t
= 2aH or
a =
v
2
t
2H
(181)
We know also that
F
haystack
mg = ma (182)
or
F
haystack
= ma +mg = m(a +g) = mg
= m
_
v
2
t
2H
+g
_
(183)
Lets suppose the haystack was H = 1.25 meter high and, because you cleverly landed on it in a
blu position to keep v
t
as small as possible, you start at the top moving at only v
t
= 50 meters
per second. Then g
= a + g is approximately 1009.8 meters/second

2
, 103 gees, and the force the
haystack must exert on you is 103 times your normal weight. You actually have a small chance of
surviving this stopping force, but it isnt a very large one.
To have a better chance of surviving, one needs to keep the g-force under 100, ideally well under
100, although a very few people are known to have survived 100 g accelerations in e.g. race car
crashes. Since the haystack portion of the acceleration needed is inversely proportional to H we
can see that a 2.5 meter haystack would lead to 51 gees, a 5 meter haystack would lead to 26 gees,
and a 10 meter haystack would lead to a mere 13.5 gees, nothing worse than some serious bruising.
If you want to get up and walk to your press conference, you need a haystack or palette at the
mattress factory or thick pine forest that will uniformly slow you over something like 10 or more
meters. I myself would prefer a stack of pillows at least 40 meters high... but then I have been
known to crack a rib just falling a meter or so playing basketball.
The amazing thing is that a number of people have been reliably documented
61
to have survived
just such a fall, often with a stopping distance of only a very few meters if that, from falls as high
60
Wikipedia: http://www.wikipedia.org/wiki/Free fall#Surviving falls. ...and have survived...
61
http://www.greenharbor.com/folder/research.html This website contains ongoing and constantly updated links
to contemporary survivor stories as well as historical ones. Its a fun read.
as 18,000 feet. Sure, they usually survive with horrible injuries, but in a very few cases, e.g. falling
into a deep bank of snow at a grazing angle on a hillside, or landing while strapped into an airline
seat that crashed down through a thick forest canopy they havent been particularly badly hurt...
Kids, dont try this at home! But if you ever do happen to fall out of an airplane at a few thousand
feet, isnt it nice that your physics class helps you have the best possible chance at surviving?
Example 2.2.2: Solution to Equations of Motion for Stokes Drag
We dont have to work very hard to actually nd and solve the equations of motion for a streamlined
object that falls subject to a Stokes drag force.
We begin by writing the total force equation for an object falling down subject to near-Earth
gravity and Stokes drag, with down being positive:
mg bv = m
dv
dt
(184)
(where weve selected the down direction to be positive in this one-dimensional problem).
We rearrange this to put the velocity derivative by itself, factor out the coecient of v on
the right, divide through the v-term from the right, multiply through by dt, integrate both sides,
exponentiate both sides, and set the constant of integration. Of course...
Was that too fast for you
62
? Like this:
dv
dt
= g
b
m
v
dv
dt
=
b
m
_
v
mg
b
_
dv
v
mg
b
=
b
m
dt
ln
_
v
mg
b
_
=
b
m
t +C
v
mg
b
= e
b
m
t
e
C
= v
0
e
b
m
t
v(t) =
mg
b
+v
0
e
b
m
t
v(t) =
mg
b
_
1 e
b
m
t
_
(185)
or
v(t) = v
t
_
1 e
b
m
t
_
(186)
(where we used the fact that v(0) = 0 to set the constant of integration v
0
, which just happened to
be v
t
, the terminal velocity!
Objects falling through a medium under the action of Stokes drag experience an exponential
approach to a constant (terminal) velocity. This is an enormously useful piece of calculus to master;
we will have a number of further opportunities to solve equations of motion this and next semester
that are rst order, linear, inhomogeneous ordinary dierential equations such as this one.
Given v(t) it isnt too dicult to integrate again and nd x(t), if we care to, but in this class
we will usually stop here as x(t) has pieces that are both linear and exponential in t and isnt as
pretty as v(t) is.
62
Just kidding! I know you (probably) have no idea how to do this. Thats why youre taking this course!
0
10
20
30
40
50
60
0 5 10 15 20 25 30
v
(
t
)
t
Figure 23: A simple object falling through a uid experiences a drag force of F
d
= b
l
v. In the
gure above m = 100 kg, g = 9.8 m/sec
2
, and b
l
= 19.6, so that terminal velocity is 50 m/sec.
Compare this gure to gure 25 below and note that it takes a relatively longer time to reach the
same terminal velocity for an object of the same mass. Note also that the b
l
that permits the
terminal velocities to be the same is much larger than b
t
!
2.2.4: Advanced: Solution to Equations of Motion for Turbulent Drag
Turbulent drag is set up exactly the same way that Stokes drag is We suppose an object is dropped
from rest and almost immediately converts to a turbulent drag force. This can easily happen because
it has a blu shape or an irregular surface together with a large coupling between that surface and
the surrounding uid (such as one might see in the following example, with a furry, uy ram).
The one catch is that the integral you have to do is a bit dicult for most physics students to
do, unless they were really good at calculus. We will use a special method to solve this integral in
the example below, one that I commend to all students when confronted by problems of this sort.
Example 2.2.3: Dropping the Ram
The UNC ram, a wooly beast of mass M
ram
is carried by some naughty (but intellectually curious)
Duke students up in a helicopter to a height H and is thrown out. On the ground below a student
armed with a radar gun measures and records the velocity of the ram as it plummets toward the
vat of dark blue paint below
63
. Assume that the uy, cute little ram experiences a turbulent drag
force on the way down of b
t
v
2
in the direction shown.
In terms of these quantities (and things like g):
a) Describe qualitatively what you expect to see in the measurements recorded by the student
(v(t)).
b) What is the actual algebraic solution v(t) in terms of the givens.
c) Approximately how fast is the fat, furry creature going when it splashes into the paint, more
or less permanently dying it Duke Blue, if it has a mass of 100 kg and is dropped from a height
63
Note well: No real sheep are harmed in this physics problem this actual experiment is only conducted with soft,
cuddly, stued sheep...
H
mg
v
F
M
B
a
a
a
h
h
h
h
!
d
ram
Figure 24: The kidnapped UNC Ram is dropped a height H from a helicopter into a vat of Duke
Blue paint!
of 1000 meters, given b
t
= 0.392 Newton-second
2
/meter
2
?
Ill get you started, at least. We know that:
F
x
= mg bv
2
= ma = m
dv
dt
(187)
or
a =
dv
dt
= g
b
m
v
2
=
b
m
_
v
2
mg
b
_
(188)
much as before. Also as before, we divide all of the stu with a v in it to the left, multiply the dt
to the right, integrate, solve for v(t), set the constant of integration, and answer the questions.
Ill do the rst few steps in this for you, getting you set up with a denite integral:
dv
v
2
mg
b
=
b
m
dt
_
v
f
0
dv
v
2
mg
b
=
b
m
_
t
f
0
dt
_
v
f
0
dv
v
2
mg
b
=
b
m
t
f
(189)
Unfortunately, the remaining integral is one you arent likely to remember. Im not either!
Does this mean that we are done? Not at all! We use the look it up in an integral table
method of solving it, also known as the famous mathematician method! Once upon a time famous
mathematicians (and perhaps some not so famous ones) worked all of this sort of thing out. Once
upon a time you and I probably worked out how to solve this in a calculus class. But we forgot (at
least I did I took integral calculus in the spring of 1973, almost forty years ago as I write this). So
what the heck, look it up!
We discover that:
_
dx
x
2
a
=
tanh
1
(x/
a)
a
(190)
Now you know what those rarely used buttons on your calculator are for. We substitute x > v,
a mg/b, multiply out the
_
mg/b and then take the hyperbolic tangent of both sides and then
multiply by
_
mg/b again to get the following result for the speed of descent as a function of time:
v(t) =
_
mg
b
tanh
_
_
gb
m
t
_
(191)
This solution is plotted for you as a function of time in gure 25 below.
0
10
20
30
40
50
60
0 5 10 15 20 25 30
v
(
t
)
t
Figure 25: A simple object falling through a uid experiences a drag force of F
d
= b
t
v
2
. In the
gure above (generated using the numbers given in the ram example), m = 100 kg, g = 9.8 m/sec
2
,
and b
t
= 0.392, so that terminal velocity is 50 m/sec. Note that the initial acceleration is g, but
that after falling around 14 seconds the object is travelling at a speed very close to terminal velocity.
Since even without drag forces it takes
_
2H/g
200 14 seconds to fall 1000 meters, it is almost

certain that the ram will be travelling at the terminal velocity of 50 m/sec as it hits the paint!
Clearly this is a lot of algebra, but thats realistic (or more so than Stokes drag for most
problems). Its just the way nature really is, tough luck and all that. If we want any consolation,
at least we didnt have to try to integrate over the transition between Stokes drag and full-blown
turbulent drag for the specic shape of a furry ram being dropped from underneath a helicopter
(that no doubt has made the air it falls through initially both turbulent and beset by a substantial
downdraft).
Real physics is often not terribly easy to compute, but the good thing is that it is still easy
enough to understand. Even if we have a hard time answering question b) above, we should all be
able to understand and draw a qualitative picture for a) and we should really even be able to guess
that the ram is moving at or near terminal velocity by the time it has fallen 1000 meters.
2.3: Inertial Reference Frames the Galilean Transformation
We have already spoken about coordinate systems, or frames, that we need to imagine when we
create the mental map between a physics problem in the abstract and the supposed reality that it
describes. One immediate problem we face is that there are many frames we might choose to solve
a problem in, but that our choice of frames isnt completely arbitrary. We need to reason out how
much freedom we have, so that we can use that freedom to make a good choice and select a frame
that makes the problem relatively simple.
Students that go on in physics will learn that there is more to this process than meets the eye
the symmetries of frames that preserve certain quantities actually leads us to an understanding of
conserved quantities and restricts acceptable physical theories in certain key ways. But even students
with no particular interest in relativity theory or quantum theory or advanced classical mechanics
(where all of this is developed) have to understand the ideas developed in this section, simply to be
able to solve problems eciently.
2.3.1: Time
Let us start by thinking about time. Suppose that you wish to time a race (as physicists). The
rst thing one has to do is understand what the conditions are for the start of the race and the end
of the race. The start of the race is the instant in time that the gun goes o and the racers (as
particles) start accelerating towards the nish line. This time is concrete, an actual event that you
can instantly observe
64
. Similarly, the end of the race is the instant in time that the racers (as
particles) cross the nish line.
Consider three observers timing the same racer. One uses a perfect stop watch, one that is
triggered by the gun and stopped by the racer crossing the nish line. The race starts at time t = 0
on the stop watch, and stops at time t
f
, the time it took the racer to complete the race.
The second doesnt have a stop watch she has to use their watch set to local time. When
the gun goes o she records t
0
, the time her watch reads at the start of the race. When the racer
crosses the nish line, she records t
1
, the nish time in local time coordinates. To nd the time of
the race, she converts her watchs time to seconds and subtracts to obtain t
f
= t
1
t
0
, which must
non-relativistically
65
agree with the rst observer.
The third has just arrived from India, and hasnt had time to reset his watch. He records t
0
for
the start, t
1
for the nish, and subtracts to once again obtain t
f
= t
1
t
0
.
All three of these times must agree because clearly the time required for the racer to cross the
nish line has nothing to do with the observers. We could use any clock we wished, set to any time
zone or started so that t = 0 occurs at any time you like to time the race as long as it records
times in seconds accurately. In physics we express this invariance by stating that we can change
clocks at will when considering a particular problem by means of the transformation:
t
= t t
0
(192)
where t
0
is the time in our old time-coordinate frame that we wish to be zero in our new, primed
frame. This is basically a linear change of variables, a so-called u-substitution in calculus, but
because we shift the zero of our clock in all cases by a constant, it is true that:
dt
= dt (193)
so dierentiation by t
is identical to dierentiation by t and:
F = m
d
2
x
dt
2
= m
d
2
x
dt
2
(194)
That is, Newtons second law is invariant under uniform translations of time, so we can start our
clocks whenever we wish and still accurately describe all motion relative to that time.
2.3.2: Space
We can reason the same way about space. If we want to measure the distance between two points on
a line, we can do so by putting the zero on our meter stick at the rst and reading o the distance
of the second, or we can put the rst at an arbitrary point, record the position of the second, and
subtract to get the same distance. In fact, we can place the origin of our coordinate system anywhere
we like and measure all of our locations relative to this origin, just as we can choose to start our
clock at any time and measure all times relative to that time.
64
For the purpose of this example we will ignore things like the speed of sound or the speed of light and assume
that our observation of the gun going o is instantaneous.
65
Students not going on in physics should just ignore this adverb. Students going on in physics should be aware
that the real, relativistic Universe those times might not agree.
Displacing the origin is described by:
x
= x x
0
(195)
and as above,
dx
= dx (196)
so dierentiating by x is the same as dierentiating by a displaced x
.
However, there is another freedom we have in coordinate transformations. Suppose you are
driving a car at a uniform speed down the highway. Inside the car is a y, ying from the back of
the car to the front of the car. To you, the y is moving slowly in fact, if you place a coordinate
frame inside the car, you can describe the ys position and velocity relative to that coordinate
frame very easily. To an observer on the ground, however, the y is ying by at the speed of the
car plus the speed of the car. The observer on the ground can use a coordinate frame on the ground
and can also describe the position of the y perfectly well.
x
vt
x
S
S
Figure 26: The frame S can be thought of as a coordinate system describing positions relative to the
ground, or laboratory, at rest. The frame S
can be thought of as the coordinate system inside

(say) the car moving at a constant velocity v relative to the coordinate system on the ground. The
position of a y in the ground coordinate frame is the position of the car in the ground frame plus
the position of the y in the coordinate frame inside the car. The position of the y in the cars
frame is the position of the y in the ground frame minus the position of the car in the ground
frame. This is an easy mental model to use to understand frame transformations.
In gure 26 one can consider the frame S to be the ground frame. x is the position of the
y relative to the ground. The frame S
is the car, moving at a constant velocity v relative to the

ground, and x
is the position of the y relative to the car. Repeat the following ritual expression
(and meditate) until it makes sense forwards and backwards:
The position of the y in the coordinate frame of the ground is the position of the y in
the coordinate frame of the car, plus the position of the car in the coordinate frame of
the ground.
In this way we can relate the position of the y in time in either one of the two frames to its
position in the other, as (looking at the triangle of vectors in gure 26):
x(t) = x
(t) +v
frame
t or
x
(t) = x(t) v
frame
t (197)
We call the transformation of coordinates in equations 197 from one (inertial) reference frame to
another moving at a constant velocity relative to the rst the Galilean transformation. Note
that we use the fact that the displacement of the origin of the two frames is vt, the velocity of the
moving frame times time. In a bit well show that this is formally correct, but you probably already
understand this pretty well based on your experiences driving cars and the like.
So much for description; what about dynamics? If we dierentiate this equation twice, we get:
dx
dt
=
dx
dt
+v
frame
(198)
d
2
x
dt
2
=
d
2
x
dt
2
(199)
(where we use the fact that the velocity v
frame
is a constant so that it disappears from the second
derivative) so that if we multiply both sides by m we prove:
F = m
d
2
x
dt
2
= m
d
2
x
dt
2
(200)
or Newtons second law is invariant under the Galilean transformation represented by equation 197
the force acting on the mass is the same in both frames, the acceleration is the same in both frames,
the mass itself is the same in both frames, and so the motion is the same except that the translation
of the S
frame itself has to be added to the trajectory in the S frame to get the trajectory in the
S
frame. It makes sense!

Any coordinate frame travelling at a constant velocity (in which Newtons rst law will thus
apparently hold
66
) is called an inertial reference frame, and since our law of dynamics is invariant
with respect to changes of inertial frame (as long as the force law itself is), we have complete freedom
to choose the one that is the most convenient.
The physics of the y relative to (expressed in) the coordinate frame in the car are identical to
the physics of the y relative to (expressed in) the coordinate frame on the ground when we account
for all of the physical forces (in either frame) that act on the y.
Equation 197, dierentiated with respect to time, can be written as:
v
= v v
frame
(201)
which you can think of as the velocity relative to the ground is the velocity in the frame plus the
velocity of the frame. This is the conceptual rule for velocity transformations: The y may be
moving only at 1 meter per second in the car, but if the car is travelling at 19 meters per second
relative to the ground in the same direction, the y is travelling at 20 meters per second relative to
the ground!
The Galilean transformation isnt the only possible way to relate frames, and in fact it doesnt
correctly describe nature. A dierent transformation called the Lorentz transformation from the
theory of relativity works much better, where both length intervals and time intervals change when
changing inertial reference frames. However, describing and deriving relativistic transformations
(and the postulates that lead us to consider them in the rst place) is beyond the scope of this
course, and they are not terribly important in the classical regime where things move at speeds
much less than that of light.
66
This is a rather subtle point, as my colleague Ronen Plesser pointed out to me. If velocity itself is always dened
relative to and measured within some frame, then constant velocity relative to what frame? The Universe doesnt
come with a neatly labelled Universal inertial reference frame or perhaps it does, the frame where the blackbody
background radiation leftover from the big bang is isotropic but even if it does the answer is relative to another
inertial reference frame which begs the question, a very bad thing to do when constructing a consistent physical
theory. To avoid this, an inertial reference frame may be dened to be any frame where Newtons First Law is true,
that is, a frame where objects at rest remain at rest and objects in motion remain in uniform motion unless acted on
by an actual external force.
2.4: Non-Inertial Reference Frames Pseudoforces
Note that if the frame S
is not travelling at a constant velocity and we dierentiate equation 201,

one more time with respect to time then:
dx
dt
=
dx
dt
+v(t)
d
2
x
dt
2
=
d
2
x
dt
2
+a
frame
(202)
or
a =a
+a
frame
(203)
Note that the velocity transformation is unchanged from that in an inertial frame the velocity of
the y relative to the ground is always the velocity of the y in the car plus the velocity of the car,
even if the car is accelerating.
However, the acceleration transformation is now dierent to nd the acceleration of an object
(e.g. a y in a car) in the lab/ground frame S we have to add the acceleration of the accelerating
frame (the car) in S to the acceleration of in the accelerating frame S.
Newtons second law is then not invariant. If S is an inertial frame where Newtons Second Law
is true, then:
F = ma = ma
+ma
frame
(204)
We would like to be able to write something that looks like Newtons Second Law in this frame
that can also be solved like Newtons Second Law in the (accelerating) frame coordinates. That is,
we would like to write:
= ma
(205)
If we compare these last two equations, we see that this is possible if and only if:
=

F ma
frame
=

F

F
p
(206)
where

F
p
is a pseudoforce a force that does not exist as a force or force rule of nature that
arises within the accelerated frame from the acceleration of the frame.
In the case of uniform frame accelerations, this pseudoforce is proportional to the mass times a
the constant acceleration of the frame and behaves a lot like the only force rule we have so far which
produces uniform forces proportional to the mass gravity near Earths surface! Indeed, it feels to
our senses like gravity has been modied if we ride along in an accelerating frame made weaker,
stronger, changing its direction. However, our algebra above shows that a pseudoforce behaves
consistently like that we can actually solve equations of motion in the accelerating frame using
the additional force rule of the pseudoforce and well get the right answers within the frame and,
when we add the coordinates in the frame to the ground/inertial frame coordinates of the frame, in
those coordinates as well.
Pseudoforces are forces which arent really there. Why, then, you might well ask, do we deal
with them? From the previous paragraph you should be able to see the answer: because it is
psychologically and occasionally computationally useful to do so. Psychologically because they
describe what we experience in such a frame; computationally because we live in a non-inertial
frame (the surface of the rotating earth) and for certain problems it is the solution in the natural
coordinates of this non-inertial frame that matters.
We have encountered a few pseudoforces already, either in the course or in our life experience.
We will encounter more in the weeks to come. Here is a short list of places where one experiences
pseudoforces, or might nd the concept itself useful in the mathematical description of motion in an
accelerating frame:
a) The force added or subtracted to a real force (i.e. mg, or a normal force) in a frame accel-
erating uniformly. The elevator and boxcar examples below illustrate this nearly ubiquitous
experience. This is the force that pushes you back in your seat when riding in a jet as it takes
o, or a car that is speeding up. Note that it isnt a force at all all that is really happening
is that the seat of the car is exerting a normal force on you so that you accelerate at the same
rate as the car, but this feels like gravity has changed to you, with a new component added to
mg straight down.
b) Rotating frames account for lots of pseudoforces, in part because we live on one (the Earth).
The centrifugal force mv
2
/r that apparently acts on an object in a rotating frame is a
pseudoforce. Note that this is just minus the real centripetal force that pushes the object
toward the center. The centrifugal force is the normal force that a scale might read as it
provides the centripetal push. It is not uniform, however its value depends on your distance
r from the axis of rotation!
c) Because of this r dependence, there are slightly dierent pseudoforces acting on objects falling
towards or away from a rotating sphere (such as the earth). These forces describe the apparent
deection of a particle as its straight-line trajectory falls ahead of or behind the rotating frame
(in which the rest velocity is a function of and r).
d) Finally, objects moving north or south along the surface of a rotating sphere also experience a
similar deection, for similar reasons. As a particle moves towards the equator, it is suddenly
travelling too slowly for its new radius (and constant ) and is apparently deected west.
As it travels away from the equator it is suddenly traveling too fast for its new radius and is
deected east. These eects combine to produce clockwise rotation of large air masses in the
northern hemisphere and anticlockwise rotations in the southern hemisphere.
Note Well: Hurricanes rotate counterclockwise in the northern hemisphere because the counter-
clockwise winds meet to circulate the other way around a defect at the center. This defect is called
the eye. Winds owing into a center have to go somewhere. At the defect they must go up or
down. In a hurricane the ocean warms air that rushes toward the center and rises. This warm wet
air dumps (warm) moisture and cools. The cool air circulates far out and gets pulled back along the
ocean surface, warming as it comes in. A hurricane is a heat engine! There is an optional section on
hurricanes down below just for fun. I live in North Carolina and teach physics in the summers at
the Duke Marine Lab at Beaufort, NC, which is more or less one end of the bowling alley where
hurricanes spawned o of the coast of Africa eventually come to shore. For me, then, hurricanes are
a bit personal every now and then they come roaring overhead and do a few billion dollars worth
of damage and kill people. Its interesting to understand at least a bit about them and how the
rotation of the earth is key to their formation and structure.
The two forces just mentioned (pseudoforces in a rotating spherical frame) are commonly called
coriolis forces and are a major driving factor in the time evolution of weather patterns in general,
not just hurricanes. They also complicate naval artillery trajectories, missile launches, and other
long range ballistic trajectories in the rotating frame, as the coriolis forces combine with drag forces
to produce very real and somewhat unpredictable deections compared to ring right at a target in
a presumed cartesian inertial frame. One day, pseudoforces will one day make pouring a drink in a
space station that is being rotated to produce a kind of pseudogravity an interesting process (hold
the cup just a bit antispinward, as things will not apparently fall in a straight line!).
2.4.1: Identifying Inertial Frames
We are now nally prepared to tackle a very dicult concept. All of our dynamics so far is based on
the notion that we can formulate it in an inertial frame. Its right there in Newtons Laws valid
only in inertial frames, and we can now clearly see that if we are not in such a frame we have to
account for pseudoforces before we can solve Newtonian problems in that frame.
This is not a trivial question. The Universe doesnt come with a frame attached frames are
something we imagine, a part of the conceptual map we are trying to build in our minds in an
accurate correspondence with our experience of that Universe. When we look out of our window,
the world appears at so we invent a Cartesian at Earth. Later, further experience on longer length
scales reveals that the world is really a curved, approximately spherical object that is only locally
at a manifold
67
in fact.
Similarly we do simple experiments suspending masses from strings, observing blocks sliding
down inclined planes, ring simple projectiles and observing their trajectories under the assumption
that our experiential coordinates associated with the Earths surface form an inertial frame, and
Newtons Laws appear to work pretty well in them at rst. But then comes the day when we re a
naval cannon at a target twenty kilometers to the north of us and all of our shots consistently miss
to the east of it because of that pesky coriolis force the pseudoforce in the rotating frame of the
earth and we learn of our mistake.
We learn to be cautious in our system of beliefs. We are always doing our experiments and
making our observations in a sort of box, a box of limited range and resolution. We have to
accept the fact that any set of coordinates we might choose might or might not be inertial, might or
might not be at, that at best they might be locally at and inertial within the box we can reach
so far.
In this latter, highly conservative point of view, how do we determine that the coordinates we are
using are truly inertial? To put it another way, is there a rest frame for the Universe, a Universal
inertial frame S from which we can transform to all other frames S
, inertial or not?
The results of the last section provide us with one possible way. If we systematically determine
the force laws of nature, Newton tells us that all of those laws involve two objects (at least). I
cannot be pushed unless I push back on something. In more appropriate language (although not so
conceptually profound) all of the force laws are laws of interaction. I interact with the Earth by
means of gravity, and with a knowledge of the force law I can compute the force I exert on the Earth
and the force the Earth exerts on me given only a knowledge of our mutual relative coordinates in
any coordinate system. Later we will learn that the same is more or less true for the electromagnetic
interaction it is a lot more complicated, in the end, than gravity, but it is still true that a knowledge
of the trajectories of two charged objects suces to determine their electromagnetic interaction, and
there is a famous paper by Wheeler and Feynman that suggests that even radiation reaction
(something that locally appears as a one-body self-force) is really a consequence of interaction with
a Universe of charge pairs.
The point is that in the end, the operational denition of an inertial frame is that it is a frame
where Newtons Laws are true for a closed, nite set of (force) Law of Nature that all involve well-
dened interaction in the coordinates of the inertial frame. In that case we can add up all of the
actual forces acting on any mass. If the observed movement of that mass is in correspondence with
Newtons Laws given that total force, the frame must be inertial! Otherwise, there must be at least
one force that we cannot identify in terms of any interaction pair, and examined closely, it will
have a structure that suggests some sort of acceleration of the frame rather than interaction per se
with a (perhaps still undiscovered) interaction law.
There is little more that we can do, and even this will not generally suce to prove that any
given frame is truly inertial. For example, consider the rest frame of the visible Universe, which
can be thought of as a sphere some 13.7 billion Light Years
68
in radius surrounding the Earth. To
67
Wikipedia: http://www.wikipedia.org/wiki/manifold. A word that students of physics or mathematics would do
well to start learning...
68
Wikipedia: http://www.wikipedia.org/wiki/Light Year. The distance light travels in a year.
the best of our ability to tell, there is no compelling asymmetry of velocity or relative acceleration
within that sphere all motion is reasonably well accounted for by means of the known forces plus an
as yet unknown force, the force associated with dark matter and dark energy, that still appears
to be a local interaction but one we do not yet understand.
How could we tell if the entire sphere were uniformly accelerating in some direction, however?
Note well that we can only observe near-Earth gravity by its opposition in a freely falling box
all motion in box coordinates is precisely what one would expect if the box were not falling! The
pseudoforce associated with the motion only appears when relating the box coordinates back to the
actual unknown inertial frame.
If all of this gives you a headache, well, it gives me a bit of a headache too. The point is once
again that an inertial frame is practically speaking a frame where Newtons Laws hold, and that while
the coordinate frame of the visible Universe is probably the best that we can do for a Universal rest
frame, we cannot be certain that it is truly inertial on a much larger length scale we might be able
to detect it if it wasnt, but then, we might not.
Einstein extended these general meditations upon the invariance of frames to invent rst special
relativity (frame transformations that leave Maxwells Equations form invariant and hence preserve
the speed of light in all inertial frames) and then general relativity, which is discussed a bit further
below.
Example 2.4.1: Weight in an Elevator
a
Figure 27: An elevator accelerates up with a net acceleration of a. The normal force exerted by the
(scale on the oor) of the elevator overcomes the force of gravity to provide this acceleration.
Lets compute our apparent weight in an elevator that is accelerating up (or down, but say up)
at some net rate a. If you are riding in the elevator, you must be accelerating up with the same
acceleration. Therefore the net force on you must be
F = ma (207)
where the coordinate direction of these forces can be whatever you like, x, y or z, because the
problem is really one dimensional and you can name the dimension whatever seems most natural to
you.
That net force is made up of two real forces: The force of gravity which pulls you down (in
whatever coordinate frame you choose), and the (normal) force exerted by all the molecules in the
scale upon the soles of your feet. This latter force is what the scale indicates as your weight
69
.
Thus:
F = ma = N mg (208)
or
N = W = mg +ma (209)
where W is your weight.
Note well that we could also write this as:
W = m(g +a) = mg
(210)
The elevator is an example of a non-inertial reference frame and its acceleration causes you to
experiences something that feels like an additional force of gravity, as if g g
. Similarly, if the
elevator accelerates down, gravity g
= g a feels weaker and you feel lighter.

Example 2.4.2: Pendulum in a Boxcar
+x
+y
ma
mg
mg
T
x
y
T
a
m
T
+y
+x
Figure 28: A plumb bob or pendulum hangs at rest at an angle in the frame of a boxcar that is
uniformly accelerating to the right.
In gure 28, we see a railroad boxcar that is (we imagine) being uniformly and continuously
accelerated to the right at some constant acceleration a = a
x
x in the (ground, inertial) coordinate
frame shown. A pendulum of mass m has been suspended at rest (in the accelerating frame of
the boxcar) at a stationary angle relative to the inertial frame y axis as shown
We would like to be able to answer questions such as:
a) What is the tension T in the string suspending the mass m?
b) What is the angle in terms of the givens and knows?
We can solve this problem and answer these questions two ways (in two distinct frames). The
rst, and I would argue right way, is to solve the Newtons Second Law dynamics problem in
the inertial coordinate system corresponding to the ground. This solution (as we will see) is simple
69
Mechanically, a non-digital bathroom scale reads the net force applied to/by its top surface as that force e.g.
compresses a spring, which in turn causes a little geared needle to spin around a dial. This will make more sense
later, as we come study springs in more detail.
enough to obtain, but it does make it relatively dicult to relate the answer in ground coordinates
(that isnt going to be terribly simple) to the extremely simple solution in the primed coordinate
system of the accelerating boxcar shown in gure 28. Alternatively, we can solve and answer it
directly in the primed accelerating frame the coordinates you would naturally use if you were
riding in the boxcar by means of a pseudoforce.
Lets proceed the rst way. In this approach, we as usual decompose the tension in the string in
terms of the ground coordinate system:
F
x
= T
x
= T sin() = ma
x
(211)
F
y
= T
y
mg = T cos() mg = ma
y
= 0 (212)
where we see that a
y
is 0 because the mass is at rest in y as the whole boxcar frame moves only
in the x-direction and hence has no y velocity or net acceleration.
From the second equation we get:
T =
mg
cos()
(213)
and if we substitute this for T into the rst equation (eliminating T) we get:
mg tan() = ma
x
(214)
or
tan() =
a
x
g
(215)
We thus know that = tan
1
(a
x
/g) and weve answered the second question above. To answer the
rst, we look at the right triangle that makes up the vector force of the tension (also from Newtons
Laws written componentwise above):
T
x
= ma
x
(216)
T
y
= mg (217)
and nd:
T =
_
T
2
x
+T
2
y
= m
_
a
2
x
+g
2
= mg
(218)
where g
=
_
a
2
x
+g
2
is the eective gravitation that determines the tension in the string, an idea
that wont be completely clear yet. At any rate, weve answered both questions.
To make it clear, lets answer them both again, this time using a pseudoforce in the accelerating
frame of the boxcar. In the boxcar, according to the work we did above, we expect to have a total
eective force:
=

F ma
frame
(219)
where

F is the sum of the actual force laws and rules in the inertial/ground frame and ma
frame
is the pseudoforce associated with the acceleration of the frame of the boxcar. In this particular
problem this becomes:
mg
= mg y ma
x
x (220)
or the magnitude of the eective gravity in the boxcar is mg
, and it points down in the boxcar

frame in the y
direction. Finding g
from its components is now straightforward:

g
=
_
a
2
x
+g
2
(221)
as before and the direction of y
is now inclined at the angle

= tan
1
_
a
x
g
_
(222)
also as before. Now we get T directly from the one dimensional statics problem along the y
direction:
T mg
= ma
y
= 0 (223)
or
T = mg
= m
_
a
2
x
+g
2
(224)
as naturally before. We get the same answer either way, and there isnt much dierence in the
work required. I personally prefer to think of the problem, and solve it, in the inertial ground frame,
but what you experience riding along in the boxcar is much closer to what the second approach
yields gravity appears to have gotten stronger and to be pointing back at an angle as the boxcar
accelerates, which is exactly what one feels standing up in a bus or train as it starts to move, in a
car as it rounds a curve, in a jet as it accelerates down the runway during takeo.
Sometimes (rarely, in my opinion) it is convenient to solve problems (or gain a bit of insight into
behavior) using pseudoforces in an accelerating frame (and the latter is certainly in better agreement
with our experience in those frames) but it will lead us to make silly and incorrect statements and
get problems wrong if we do things carelessly, such as call mv
2
/r a force where it is really just ma
c
,
the right and side of Newtons Second Law where the left hand side is made up of actual force rules.
In this kind of problem and many others it is better to just use the real forces in an inertial reference
frame, and we will fairly religiously stick to this in this textbook. As the next discussion (intended
only for more advanced or intellectually curious students who want to be guided on a nifty wikiromp
of sorts) suggests, however, there is some advantage to thinking more globally about the apparent
equivalence between gravity in particular and pseudoforces in accelerating frames.
2.4.2: Advanced: General Relativity and Accelerating Frames
As serious students of physics and mathematics will one day learn, Einsteins Theory of Special
Relativity
70
and the associated Lorentz Transformation
71
will one day replace the theory of inertial
relativity and the Galilean transformation between inertial reference frames we deduced in week
1. Einsteins result is based on more or less the same general idea the laws of physics need to be
invariant under inertial frame transformation. The problem is that Maxwells Equations (as you will
learn in detail in part 2 of this course, if you continue) are the actual laws of nature that describe
electromagnetism and hence need to be so invariant. Since Maxwells equations predict the speed
of light, the speed of light has to be the same in all reference frames!
This has the consequence which we will not cover in any sort of detail at this time of causing
space and time to become a system of four dimensional spacetime, not three space dimension plus
time as an independent variable. Frame transformations nonlinearly mix space coordinates and time
as a coordinate instead of just making simple linear tranformations of space coordinates according
to Galilean relativity.
Spurred by his success, Einstein attempted to describe force itself in terms of curvature of space-
time, working especially on the ubiquitous force of gravity. The idea there is that the pseudoforce
produced by the acceleration of a frame is indistinguishible from a gravitational force, and that a
generalized frame transformation (describing acceleration in terms of curvature of spacetime) should
be able to explain both.
This isnt quite true, however. A uniformly accelerating frame can match the local magnitude of
a gravitational force, but gravitational elds have (as we will learn) a global geometry that cannot be
matched by a uniform acceleration this hypothesis works only in small volumes of space where
gravity is approximately uniform, for example in the elevator or train above. Nor can one match it
70
Wikipedia: http://www.wikipedia.org/wiki/Special Relativity.
71
Wikipedia: http://www.wikipedia.org/wiki/Lorentz Transformation.
with a rotating frame as the geometric form of the coriolis force that arises in a rotating frame does
not match the 1/r
2
r gravitational force law.
The consequence of this problem is that it is considerably more dicult to derive the theory
of general relativity than it is the theory of special relativity one has to work with manifolds
72
.
In a suciently small volume Einsteins hypothesis is valid and gives excellent results that predict
sometimes startling but experimentally veried deviations from classical expectations (such as the
precession of the perihelion of Mercury)
73
The one remaining problem with general relativity also beyond the scope of this textbook is
its fundamental, deep incompatibility with quantum theory. Einstein wanted to view all forces of
nature as being connected to spacetime curvature, but quantum mechanics provides a spectacularly
dierent picture of the cause of interaction forces the exchange of quantized particles that mediate
the eld and force, e.g. photons, gluons, heavy vector bosons, and by extension gravitons
74
. So
far, nobody has found an entirely successful way of unifying these two rather distinct viewpoints,
although there are a number of candidates
75
.
72
Wikipedia: http://www.wikipedia.org/wiki/Manifold. A manifold is a topological curved space that is locally
at in a suciently small volume. For example, using a simple cartesian map to navigate on the surface of the
at Earth is quite accurate up to distances of order 10 kilometers, but increasingly inaccurate for distances of order
100 kilometers, where the fact that the Earths surface is really a curved spherical surface and not a at plane begins
to matter. Calculus on curved spaces is typically dened in terms of a manifold that covers the space with locally
Euclidean patches. Suddenly the mathematics has departed from the relatively simple calculus and geometry we use
in this book to something rather dicult...
73
Wikipedia: http://www.wikipedia.org/wiki/Tests of general relativity. This is one of several famous tests of
the theory of general relativity, which is generally accepted as being almost correct, or rather, correct in context.
74
Wikipedia: http://www.wikipedia.org/wiki/gravitons. The quantum particle associated with the gravitational
eld.
75
Wikipedia: http://www.wikipedia.org/wiki/quantum gravity. Perhaps the best known of these is string theory,
but as this article indicates, there are a number of others, and until dark matter and dark energy are better understood
as apparent modiers of gravitational force we may not be able to experimentally choose between them.
2.5: Just For Fun: Hurricanes
Figure 29: Satellite photo of Hurricane Ivan as of September 8, 2004. Note the roughly symmetric
rain bands circulating in towards the center and the small but clearly dened eye.
Hurricanes are of great interest, at least in the Southeast United States where every fall several
of them (on average) make landfall somewhere on the Atlantic or Gulf coast between Texas and
North Carolina. Since they not infrequently do billions of dollars worth of damage and kill dozens
of people (usually drowned due to ooding) it is worth taking a second to look over their Coriolis
dynamics.
In the northern hemisphere, air circulates around high pressure centers in a generally clockwise
direction as cool dry air falls out of them in all directions, deecting west as it ows out south
and east as it ow out north.
Air circulates around low pressure centers in a counterclockwise direction as air rushes to the
center, warms, and lifts. Here the eastward deection of north-travelling air meets the west deection
of south-travelling air and creates a whirlpool spinning opposite to the far curvature of the incoming
air (often owing in from a circulation pattern around a neighboring high pressure center).
If this circulation occurs over warm ocean water it picks up considerable water vapor and heat.
The warm, wet air cools as it lifts in the central pattern of the low and precipitation occurs, releasing
the energy of fusion into the rapidly expanding air as wind owing out of the low pressure center
at high altitude in the usual clockwise direction (the outow of the storm). If the low remains
over warm ocean water and no shear winds blow at high altitude across the developing eye and
interfere with the outow, a stable pattern in the storm emerges that gradually amplies into a
hurricane with a well dened eye where the air has very low pressure and no wind at all.
Figure 32 shows a snapshot of the high and low pressure centers over much of North and South
America and the Atlantic on September 8, 2004. In it, two extreme low pressure centers are clearly
visible that are either hurricanes or hurricane remnants. Note well the counterclockwise circulation
around these lows. Two large high pressure regions are also clearly visible, with air circulating
around them (irregularly) clockwise. This rotation smoothly transitions into the rotation around
the lows across boundary regions.
Southward
trajectory
Falling deflects east
North to South deflects west
direction of rotation
S
N
(NorthCounter Clockwise)
Hurricane
Eye
Figure 30:
Figure 31: Coriolis dynamics associated with tropical storms. Air circulating clockwise (from sur-
rounding higher pressure regions) meets at a center of low pressure and forms a counterclockwise
eye.
As you can see the dynamics of all of this are rather complicated air cannot just ow on the
surface of the Earth it has to ow from one place to another, being replaced as it ows. As it ows
north and south, east and west, up and down, pseudoforces associated with the Earths rotation
join the real forces of gravitation, air pressure dierences, buoyancy associated with dierential
heating and cooling due to insolation, radiation losses, conduction and convection, and moisture
accumulation and release, and more. Atmospheric modelling is dicult and not terribly skilled
(predictive) beyond around a week or at most two, at which point small uctuations in the initial
conditions often grow to unexpectedly dominate global weather patterns, the so-called buttery
eect
76
.
In the specic case of hurricanes (that do a lot of damage, providing a lot of political and economic
incentive to improve the predictive models) the details of the dynamics and energy release are only
gradually being understood by virtue of intense study, and at this point the hurricane models are
quite good at predicting motion and consequence within reasonable error bars up to ve or six
days in advance. There is a wealth of information available on the Internet
77
to any who wish to
learn more. An article
78
on the Atlantic Oceanographic and Meteorological Laboratorys Hurricane
Frequently Asked Questions
79
website contains a lovely description of the structure of the eye and
the inowing rain bands.
Atlantic hurricanes usually move from Southeast to Northwest in the Atlantic North of the
76
Wikipedia: http://www.wikipedia.org/wiki/Buttery Eect. So named because The ap of a butterys wings
in Brazil causes a hurricane in the U.S. some months later. This latter sort of statement isnt really correct, of
course many things conspire to cause the hurricane. It is intended to reect the fact that weather systems exhibit
deterministic chaotic dynamics innite sensitivity to initial conditions so that tiny dierences in initial state lead to
radically dierent states later on.
77
Wikipedia: http://www.wikipedia.org/wiki/Tropical Cyclone.
78
http://www.aoml.noaa.gov/hrd/tcfaq/A11.html
79
http://www.aoml.noaa.gov/hrd/weather sub/faq.html
Figure 32: Pressure/windeld of the Atlantic on September 8, 2004. Two tropical storms are visible
the remnants of Hurricane Frances poised over the U.S. Southeast, and Hurricane Ivan just north
of South America. Two more low pressure tropical waves are visible between South America
and Africa either or both could develop into tropical storms if shear and water temperature are
favorable. The low pressure system in the middle of the Atlantic is extratropical and very unlikely
to develop into a proper tropical storm.
equator until they hook away to the North or Northeast. Often they sweep away into the North
Atlantic to die as mere extratropical storms without ever touching land. When they do come ashore,
though, they can pack winds well over a hundred miles an hour. This is faster than the terminal
velocity associated with atmospheric drag and thereby they are powerful enough to lift a human
or a cow right o their feet, or a house right o its foundations. In addition, even mere tropical
storms (which typically have winds in the range where wind per se does relatively little damage)
can drop a foot of rain in a matter of hours across tens of thousands of square miles or spin down
local tornadoes with high and damaging winds. Massive ooding, not wind, is the most common
cause of loss of life in hurricanes and other tropical storms.
Hurricanes also can form in the Gulf of Mexico, the Carribean, or even the waters of the Pacic
close to Mexico. Tropical cyclones in general occur in all of the worlds tropical oceans except for
the Atlantic south of the equator, with the highest density of occurrence in the Western Pacic
(where they are usually called typhoons instead of hurricanes). All hurricanes tend to be highly
unpredictable in their behavior as they bounce around between and around surrounding air pressure
ridges and troughs like a pinball in a pinball machine, and even the best of computational models,
updated regularly as the hurricane evolves, often err by over 100 kilometers over the course of just
a day or two.
Homework for Week 2
Problem 1.
Physics Concepts: Make this weeks physics concepts summary as you work all of the problems
in this weeks assignment. Be sure to cross-reference each concept in the summary to the problem(s)
they were key to, and include concepts from previous weeks as necessary. Do the work carefully
enough that you can (after it has been handed in and graded) punch it and add it to a three ring
binder for review and study come nals!
Problem 2.
m
L
A block of mass m sits at rest on a rough plank of length L that can be gradually tipped up
until the block slides. The coecient of static friction between the block and the plank is
s
; the
coecient of dynamic friction is
k
and as usual,
k
<
s
.
a) Find the angle
0
at which the block rst starts to move.
b) Suppose that the plank is lifted to an angle >
0
(where the mass will denitely slide) and
the mass is released from rest at time t
0
= 0. Find its acceleration a down the incline.
c) Finally, nd the time t
f
that the mass reaches the lower end of the plank.
Problem 3.
r
m
m
1
2
v
A hockey puck of mass m
1
is tied to a string that passes through a hole in a frictionless table,
where it is also attached to a mass m
2
that hangs underneath. The mass is given a push so that it
moves in a circle of radius r at constant speed v when mass m
2
hangs free beneath the table. Find
r as a function of m
1
, m
2
, v, and g.
Problem 4.
F
M
m
A small square block m is sitting on a larger wedge-shaped block of mass M at an upper angle
0
such that the little block will slide on the big block if both are started from rest and no other
forces are present. The large block is sitting on a frictionless table. The coecient of static friction
between the large and small blocks is
s
. With what range of force F can you push on the large
block to the right such that the small block will remain motionless with respect to the large block
and neither slide up nor slide down?
Problem 5.
1
m
m
2
A mass m
1
2
by an Acme (massless, unstretchable) string. m
1
sits on a table with which it has coecients of static and dynamic friction
s
and
k
respectively.
m
2
is hanging over the ends of a table, suspended by the taut string from an Acme (frictionless,
massless) pulley. At time t = 0 both masses are released.
a) What is the minimum mass m
2,min
such that the two masses begin to move?
b) If m
2
= 2m
2,min
, determine how fast the two blocks are moving when mass m
2
has fallen a
height H (assuming that m
1
Problem 6.
R
v towards center
(top view) (side view)

m
A car of mass m is rounding a banked curve that has radius of curvature R and banking angle
. Find the speed v of the car such that it succeeds in making it around the curve without skidding
on an extremely icy day when
s
0.
Problem 7.
R
v towards center
(top view) (side view)

m
A car of mass m is rounding a banked curve that has radius of curvature R and banking angle .
The coecient of static friction between the cars tires and the road is
s
. Find the range of speeds
v of the car such that it can succeed in making it around the curve without skidding.
Problem 8.
m
v
You and a friend are working inside a cylindrical new space station that is a hundred meters long
and thirty meters in radius and lled with a thick air mixture. It is lunchtime and you have a bag of
oranges. Your friend (working at the other end of the cylinder) wants one, so you throw one at him
at speed v
0
at t = 0. Assume Stokes drag, that is

F
d
= bv (this is probably a poor assumption
depending on the initial speed, but it makes the algebra relatively easy and qualitatively describes
the motion well enough).
a) Derive an algebraic expression for the velocity of the orange as a function of time.
b) How long does it take the orange to lose half of its initial velocity?
Problem 9.
R
m
v
A bead of mass m is threaded on a metal hoop of radius R. There is a coecient of kinetic
friction
k
between the bead and the hoop. It is given a push to start it sliding around the hoop
with initial speed v
0
. The hoop is located on the space station, so you can ignore gravity.
a) Find the normal force exerted by the hoop on the bead as a function of its speed.
b) Find the dynamical frictional force exerted by the hoop on the bead as a function of its speed.
c) Find its speed as a function of time. This involves using the frictional force on the bead in
Newtons second law, nding its tangential acceleration on the hoop (which is the time rate of
change of its speed) and solving the equation of motion.
All answers should be given in terms of m,
k
, R, v (where requested) and v
0
.
Problem 10.
m
2
m
1
A block of mass m
2
sits on a rough table. The coecients of friction between the block and
the table are
s
and
k
for static and kinetic friction respectively. A mass m
1
is suspended from
an massless, unstretchable, unbreakable rope that is looped around the two pulleys as shown and
attached to the support of the rightmost pulley. At time t = 0 the system is released at rest.
a) Find an expression for the minimum mass m
1,min
such that the masses will begin to move.
b) Suppose m
1
= 2m
1,min
(twice as large as necessary to start it moving). Solve for the acceler-
ations of both masses. Hint: Is there a constraint between how far mass m
2
moves when mass
m
1
moves down a short distance?
c) Find the speed of both masses after the small mass has fallen a distance H. Remember this
answer and how hard you had to work to nd it next week we will nd it much more easily.
Problem 11.
m
m
1
2
Two blocks, each with the same mass m but made of dierent materials, sit on a rough plane
inclined at an angle such that they will slide (so that the component of their weight down the incline
exceeds the maximum force exerted by static friction). The rst (upper) block has a coecient of
kinetic friction of
k1
between block and inclined plane; the second (lower) block has coecient of
kinetic friction
k2
. The two blocks are connected by an Acme string.
Find the acceleration of the two blocks a
1
and a
2
down the incline:
a) when
k1
>
k2
;
b) when
k2
>
k1
.
Advanced Problem 12.
m
R
A small frictionless bead is threaded on a semicircular wire hoop with radius R, which is then
spun on its vertical axis as shown above at angular velocity .
a) Find an expression for in terms of R, g and .
b) What is the smallest angular frequency
min
such that the bead will not sit at the bottom at
= 0, for a given R.
140 Week 3: Work and Energy
Optional Problems
No optional problems (yet) this week.
Week 3: Work and Energy
Summary
The Work-Kinetic Energy Theorem in words is The work done by the total force acting
on an object between two points equals the change in its kinetic energy. As is frequently the
case, though, this is more usefully learned in terms of its algebraic forms:
W(x
1
x
2
) =
_
x
2
x
1
F
x
dx =
1
2
mv
2
2
1
2
mv
2
1
= K (225)
in one dimension or
W(x
1
x
2
) =
_
x
2
x
1
F d
=
1
2
mv
2
2
1
2
mv
2
1
= K (226)
in two or more dimensions, where the integral in the latter is along some specic path
between the two endpoints.
A Conservative Force

F
c
is one where the integral:
W(x
1
x
2
) =
_
x
2
x
1
F
c
d
(227)
does not depend on the particular path taken between x
1
and x
2
. In that case going from x
1
to x
2
by one path and coming back by another forms a loop (a closed curve containing both
points). We must do the same amount of positive work going one way as we do negative the
other way and therefore we can write the condition as:
_
C
F
c
d
= 0 (228)
for all closed curves C.
Note Well: If you have no idea what the dot-product in these equations is or how to evaluate
it, if you dont know what an integral along a curve is, it might be a good time to go over the
former in the online math review and pay close attention to the pictures below that explain it
in context. Dont worry about this its all part of what you need to learn in the course, and
I dont expect that you have a particularly good grasp of it yet, but it is denitely something
to work on!
Potential Energy is the negative work done by a conservative force (only) moving between
two points. The reason that we bother dening it is because for known, conservative force rules,
we can do the work integral once and for all for the functional form of the force and obtain an
answer that is (within a constant) the same for all problems! We can then simplify the Work-
Kinetic Energy Theorem for problems involving those conservative forces, changing them into
energy conservation problems (see below). Algebraically:
U(x) =
_

F
c
d
+U
0
(229)
141
where the integral is the indenite integral of the force and U
0
is an arbitrary constant of
integration (that may be set by some convention though it doesnt really have to be, be wary)
or else the change in the potential energy is:
U(x
0
x
1
) =
_
x
1
x
0
F
c
d
(230)
(independent of the choice of path between the points).
The Law of Conservation of Mechanical Energy states that if no non-conservative forces
are acting, the sum of the potential and kinetic energies of an object are constant as the object
moves around:
E
i
= U
0
+K
0
= U
f
+K
f
= E
f
(231)
where U
0
= U(x
0
), K
0
=
1
2
mv
2
0
etc.
The Generalized Non-Conservative Work-Mechanical Energy Theorem states that if
both conservative and non-conservative forces are acting, the work done by the non-conservative
forces (e.g. friction, drag) equals the change in the total mechanical energy:
W
nc
=
_
x
1
x
0
F
nc
d
= E
mech
= (U
f
+K
f
) (U
0
+K
0
) (232)
In general, recall, the work done by non-conservative forces depends on the path taken,
so the left hand side of this must be explicitly evaluated for a particular path while the right
hand side depends only on the values of the functions at the end points of that path.
Power is the work performed per unit time by a force:
P =
dW
dt
(233)
In many mechanics problems, power is most easily evaluated by means of:
P =
d
dt
_
F d
_
=

F
d
dt
=

F v (234)
An object is in force equilibrium when its potential energy function is at a minimum or
maximum. This is because the other way to write the denition of potential energy is:
F
x
=
dU
dx
(235)
so that if
dU
dx
= 0 (236)
then F
x
= 0, the condition for force equilibrium in one dimension.
For advanced students: In more than one dimension, the force is the negative gradient of the
potential energy:
F =
U =
U
x
x
U
y
y
U
z
z (237)
(where

x
stands for the partial derivative with respect to x, the derivative of the function
one takes pretending the other coordinates are constant.
An equilibrium point x
e
is stable if U(x
e
) is a minimum. A mass hanging at rest from a
string is at a stable equilibrium at the bottom.
e
is unstable if U(x
e
) is a maximum. A pencil balanced on its point
(if you can ever manage such a feat) is in unstable equilibrium the slightest disturbance and
it will fall.
e
is neutral if U(x
e
) is at to either side, neither ascending or de-
scending. A disk placed on a perfectly level frictionless table is in neutral equilibrium if it
is place at rest, it will remain at rest no matter where you place it, but of course if it has
the slightest nonzero velocity it will coast until it either reaches the edge of the table or some
barrier that traps it. In the latter sense a perfect neutral equilibrium is often really unstable,
as it is essentially impossible to place an object at rest, but friction or drag often conspire to
stabilize a neutral equilibrium so that yes, if you put a penny on a table it will be there the
next day, unmoved, as far as physics is concerned...
3.1: Work-Kinetic Energy Theorem
If youve been doing all of the work assigned so far, you may have noticed something. In many of the
problems, you were asked to nd the speed of an object (or, if the direction was obvious, its velocity)
after it moved from some initial position to a nal position. The solution strategy you employed
over and over again was to solve the equations of motion, solve for the time, substitute the time,
nd the speed or velocity. We used this in the very rst example in the book and the rst actual
homework problem to show that a mass dropped from rest that falls a height H hits the ground at
speed v =
2gH, but later we discovered that a mass that slides down a frictionless inclined plane
starting from rest a height H above the ground arrives at the ground as a speed
2gH independent
of the slope of the incline!
If you were mathematically inclined or used a dierent textbook, one with a separate section
on the kinematics of constant acceleration motion (a subject this textbook has assiduously avoided,
instead requiring you to actually solve the equations of motion using calculus repeatedly and then
use algebra as needed to answer the questions) you might have noted that you can actually do the
algebra associated with this elimination of time once and for all for a constant acceleration problem
in one dimension. It is simple.
If you look back at week 1, you can see if that if you integrate a constant acceleration of an
object twice, you obtain:
v(t) = at +v
0
x(t) =
1
2
at
2
+v
0
t +x
0
as a completely general kinematic solution in one dimension, where v
0
is the initial speed and x
0
is
the initial x position at time t = 0.
Now, suppose you want to nd the speed v
1
the object will have when it reaches position x
1
.
One can algebraically, once and for all note that this must occur at some time t
1
such that:
v(t
1
) = at
1
+v
0
= v
1
x(t
1
) =
1
2
at
2
1
+v
0
t
1
+x
0
= x
1
We can algebraically solve the rst equation once and for all for t
1
:
t
1
=
v
1
v
0
a
(238)
and substitute the result into the second equation, elminating time altogether from the solutions:
1
2
a
_
v
1
v
0
a
_
2
+v
0
_
v
1
v
0
a
_
+x
0
= x
1
1
2a
_
v
2
1
2v
0
v
1
+v
2
0
_
+
_
v
0
v
1
v
2
0
a
_
= x
1
x
0
v
2
1
2v
0
v
1
+v
2
0
+ 2v
0
v
1
2v
2
0
= 2a(x
1
x
0
)
or
v
2
1
v
2
0
= 2a(x
1
x
0
) (239)
Many textbooks encourage students to memorize this equation as well as the two kinematic solutions
for constant acceleration very early often before one has even learned Newtons Laws so that
students never have to actually learn why these solutions are important or where they come from,
but at this point youve hopefully learned both of those things well and it is time to make solving
problems of this kinds a little bit easier.
However, we will not do so using this constant acceleration kinematic equation even now! There
is no need! As we will see below, it is quite simple to eliminate time from Newtons Second Law itself
once and for all, and obtain a powerful way of solving many, many physics problems in particular,
ones where the questions asked do not depend on specic times without the tedium of integrating
out the equations of motion. This time independent formulation of force laws and motion turns
out, in the end, to be even more general and useful than Newtons Laws themselves, surviving the
transition to quantum theory where the concepts of force and acceleration do not.
One very good thing about waiting as we have done and not memorizing anything, let alone
kinematic constant acceleration solutions, is that this new formulation in terms of work and energy
works just ne for non-constant forces and accelerations, where the kinematic solutions above are
(as by now you should fully appreciate, having worked through e.g. the drag force and investigated
the force exerted by springs, neither of which are constant in space or in time) completely useless
and wrong.
Let us therefore begin now with this relatively meaningless kinematical result that arises from
eliminating time for a constant acceleration in one dimension only planning to use it only
long enough to ensure that we never have to use it because weve found something even better that
is far more meaningful :
v
2
1
v
2
0
= 2ax (240)
where x is the displacement of the object x
1
x
0
.
If we multiply by m (the mass of the object) and move the annoying 2 over to the other side, we
can make the constant acceleration a into a constant force F
x
= ma:
(ma)x =
1
2
mv
2
1
1
2
mv
2
0
(241)
F
x
x =
1
2
mv
2
1
1
2
mv
2
0
(242)
We now dene the work done by the constant force F
x
on the mass m as it moves through
the distance x to be:
W = F
x
x. (243)
The work can be positive or negative.
3.1.1: Units of Work and Energy
Work is a form of energy. As always when we rst use a new named quantity in physics, we need
to dene its units so we can e.g. check algebraic results for kinematic consistency, correctly identify
work, and learn to quantitatively appreciated it when people refer to quantities in other sciences or
circumstances (such as the energy yield of a chemical reaction, the power consumed by an electric
light bulb, or the energy consumed and utilized by the human body in a day) in these units.
In general, the denition of SI units can most easily be remembered and understood from the
basic equations that dene the quantity of interest, and the units of energy are no exception. Since
work is dened above to be a force times a distance, the SI units of energy must be the SI units of
force (Newtons) times the SI units of length (meters). The units themselves are named (as many
are) after a Famous Physicist, James Prescott Joule
80
. Thus:
1 Joule = 1 Newton-meter = 1
kilogram-meter
2
second
2
(244)
3.1.2: Kinetic Energy
The latter, we also note, are the natural units of mass times speed squared. We observe that this
is the quantity that changes when we do work on a mass, and that this energy appears to be a
characteristic of the moving mass associated with the motion itself (dependent only on the speed
v). We therefore dene the quantity changed by the work to be the kinetic energy
81
and will use
the symbol K to represent it in this work:
K =
1
2
mv
2
(245)
Note that kinetic energy is a relative quantity it depends upon the inertial frame in which
it is measured. Suppose we consider the kinetic energy of a block of mass m sliding forward at a
constant speed v
b
in a railroad car travelling at a constant speed v
c
. The frame of the car is an
inertial reference frame and so Newtons Laws must be valid there. In particular, our denition of
kinetic energy that followed from a solution to Newtons Laws ought to be valid there. It should be
equally valid on the ground, but these two quantities are not equal.
Relative to the ground, the speed of the block is:
v
g
= v
b
+v
c
(246)
and the kinetic energy of the block is:
K
g
=
1
2
mv
2
g
=
1
2
mv
2
b
+
1
2
mv
2
c
+mv
b
v
c
(247)
or
K
g
= K
b
+
1
2
mv
2
c
+mv
b
v
c
(248)
where K
b
is the kinetic energy of the block in the frame of the train.
Worse, the train is riding on the Earth, which is not exactly at rest relative to the sun, so we
could describe the velocity of the block by adding the velocity of the Earth to that of the train and
the block within the train. The kinetic energy in this case is so large that the dierence in the
energy of the block due to its relative motion in the train coordinates is almost invisible against the
huge energy it has in an inertial frame in which the sun is approximately at rest. Finally, as we
discussed last week, the sun itself is moving relative to the galactic center or the rest frame of the
visible Universe.
What, then, is the actual kinetic energy of the block?
I dont know that there is such a thing. But the kinetic energy of the block in the inertial
reference frame of any well-posed problem is
1
2
mv
2
, and that will have to be enough for us. As we
will prove below, this denition makes the work done by the forces of nature consistent within the
frame, so that our computations will give us answers consistent with experiment and experience in
the frame coordinates.
80
Wikipedia: http://www.wikipedia.org/wiki/James Prescott Joule. He worked with temperature and heat and was
one of the rst humans on Earth to formulate and initially experimentally verify the Law of Conservation of Energy,
discussed below. He also discovered and quantied resistive electrical heating (Joule heating) and did highly precise
experiments that showed that mechanical energy delivered into a closed system increased its temperature is the work
converted into heat.
81
The work kinetic means related to the motion of material bodies, although we also apply it to e.g. hyperkinetic
people...
3.1.3: Derivations of the Work-Kinetic Energy Theorem
Let us now formally state the result we derived above using the new denitions of work and kinetic
energy as the Work-Kinetic Energy Theorem (which I will often abbreviate, e.g. WKET) in
one dimension in English:
The work done on a mass by the total force acting on it is equal to the change in its
kinetic energy.
and as an equation that is correct for constant one dimensional forces only:
W = F
x
x =
1
2
mv
2
f

1
2
mv
2
i
= K (249)
You will note that in the English statement of the theorem, I didnt say anything about needing
the force to be constant or one dimensional. I did this because those conditions arent necessary I
only used them to bootstrap and motivate a completely general result. Of course, now it is up to us
to prove that the theorem is general and determine its correct and general algebraic form.
I will do this two completely dierent ways below, as each has its lessons.
x x
x
F
0
x
1
x
2
x
3
x
4
x
5
x
6
x
7
x
f
Figure 33: The work done by a variable force can be approximated arbitrarily accurately by summing
F
x
x using the average force as if it were a constant force across each of the slices of width x
one can divide the entire interval into. In the limit that the width x dx, this summation turns
into the integral.
First, let us consider a force that varies with position so that it can be mathematically described
as a function of x, F
x
(x). To compute the work done going between (say) x
0
and some position
x
f
that will ultimately equal the total change in the kinetic energy, we can try to chop the interval
x
f
x
0
up into lots of small pieces, each of width x. x needs to be small enough that F
x
basically
doesnt change much across it, so that we are justied in saying that it is constant across each
interval, even though the value of the constant isnt exactly the same from interval to interval. The
actual value we use as the constant in the interval isnt terribly important the easiest to use is the
average value or value at the midpoint of the interval, but no matter what sensible value we use the
error we make will vanish as we make x smaller and smaller.
In gure 33, you can see a very crude sketch of what one might get chopping the total interval
x
0
x
f
up into eight pieces such that e.g. x
1
= x
0
+x, x
2
= x
1
+x,... and computing the work
done across each sub-interval using the approximately constant value it has in the middle of the
sub-interval. If we let F
1
= F
x
(x
0
+ x/2), then the work done in the rst interval, for example, is
F
1
x, the shaded area in the rst rectangle draw across the curve. Similarly we can nd the work
done for the second strip, where F
2
= F
x
(x
1
+x/2) and so on. In each case the work done equals
the change in kinetic energy as the particle moves across each interval from x
0
to x
f
.
We then sum the constant acceleration Work-Kinetic-Energy theorem for all of these intervals:
W
tot
= F
1
(x
1
x
0
) +F
2
(x
2
x
1
) +. . .
= (
1
2
mv
2
(x
1
)
1
2
mv
2
(x
0
)) + (
1
2
mv
2
(x
2
)
1
2
mv
2
(x
1
)) +. . .
F
1
x +F
2
x +. . . =
1
2
mv
2
f

1
2
mv
2
i
8
i=1
F
i
x =
1
2
mv
2
f

1
2
mv
2
i
(250)
where the internal changes in kinetic energy at the end of each interval but the rst and last cancel.
Finally, we let x go to zero in the usual way, and replace summation by integration. Thus:
W
tot
= lim
x0
i=1
F
x
(x
0
+ix)x =
_
x
f
x
0
F
x
dx = K (251)
and we have generalized the theorem to include non-constant forces in one dimension
82
.
This approach is good in that it makes it very clear that the work done is the area under the
curve F
x
(x), but it buries the key idea the elimination of time in Newtons Second Law way back
in the derivation and relies uncomfortably on constant force/acceleration results. It is much more
elegant to directly derive this result using straight up calculus, and honestly it is a lot easier, too.
To do that, we simply take Newtons Second Law and eliminate dt using the chain rule. The
algebra is:
F
x
= ma
x
= m
dv
x
dt
F
x
= m
dv
x
dx
dx
dt
(chain rule)
F
x
= m
dv
x
dx
v
x
(denition of v
x
)
F
x
dx = mv
x
dv
x
(rearrange)
_
x
1
x
0
F
x
dx = m
_
v
1
v
0
v
x
dv
x
(integrate both sides)
W
tot
=
_
x
1
x
0
F
x
dx =
1
2
mv
2
1
1
2
mv
2
0
(The WKE Theorem, QED!) (252)
This is an elegant proof, one that makes it completely clear that time dependence is being eliminated
in favor of the direct dependence of v on x. It is also clearly valid for very general one dimensional
force functions; at no time did we assume anything about F
x
other than its general integrability in
the last step.
What happens if

F is actually a vector force, not necessarily in acting only in one dimension?
Well, the rst proof above is clearly valid for F
x
(x), F
y
(y) and F
z
(z) independently, so:
_

F d
=
_
F
x
dx +
_
F
y
dy +
_
F
z
dz = K
x
+ K
y
+ K
z
= K (253)
However, this doesnt make the meaning of the integral on the left very clear.
The best way to understand that is to examine a small piece of the path in two dimensions. In
gure 34 a small part of the trajectory of a particle is drawn. A small chunk of that trajectory d
represents the vector displacement of the object over a very short time under the action of the force
F acting there.
82
This is notationally a bit sloppy, as Im not making it clear that as Deltax gets smaller, you have to systematically
increase the number of pieces you divide x
f
x
0
into and so on, hoping that you all remember you intro calculus
course and recognize this picture as being one of the rst things you learned about integration...
F
dl
F
||
x(t)
Figure 34: Consider the work done going along the particular trajectory x(t) where there is a force
F(x) acting on it that varies along the way. As the particle moves across the small/dierential
section d
, only the force component along d
does work. The other force component changes the

direction of the velocity without changing its magnitude.
The component of

F perpendicular to d
doesnt change the speed of the particle; it behaves like

a centripetal force and alters the direction of the velocity without altering the speed. The component
parallel to d
, however, does alter the speed, that is, does work. The magnitude of the component
in this direction is (from the picture) F cos() where is the angle between the direction of

F and
the direction of d
.
That component acts (over this very short distance) like a one dimensional force in the direction
of motion, so that
dW = F cos()d = d(
1
2
mv
2
) = dK (254)
The next little chunk of x(t) has a dierent force and direction but the form of the work done
and change in kinetic energy as the particle moves over that chunk is the same. As before, we can
integrate from one end of the path to the other doing only the one dimensional integral of the path
element d times F
||
, the component of

F parallel to the path at that (each) point.
The vector operation that multiplies a vector by the component of another vector in the same
direction as the rst is the dot (or scalar) product. The dot product between two vectors

A and
B can be written more than one way (all equally valid):
A

B = ABcos() (255)
= A
x
B
x
+A
y
B
y
+A
z
B
z
(256)
The second form is connected to what we got above just adding up the independent cartesian
component statements of the Work-Kinetic Energy Theorem in one (each) dimension, but it doesnt
help us understand how to do the integral between specic starting and ending coordinates along
some trajectory. The rst form of the dot product, however, corresponds to our picture:
dW = F cos()d =

F d
= dK (257)
Now we can see what the integral means. We have to sum this up along some specic path
between x
0
and x
1
to nd the total work done moving the particle along that path by the force. For
dierential sized chunks, the sum becomes an integral and we integrate this along the path to get
the correct statement of the Work-Kinetic Energy Theorem in 2 or 3 dimensions:
W(x
0
x
1
) =
_
x
1
x
0
F d
=
1
2
mv
2
1
1
2
mv
2
0
= K (258)
Note well that this integral may well be dierent for dierent paths connecting points x
0
to x
1
!
In the most general case, one cannot nd the work done without knowing the path taken, because
there are many ways to go between any two points and the forces could be very dierent along them.
Also, Note well: Energy is a scalar just a number with a magnitude and units but no direction
and hence is considerably easier to treat than vector quantities like forces.
Note well: Normal forces (perpendicular to the direction of motion) do no work:
W =

F
x = 0. (259)
In fact, force components perpendicular to the trajectory bend the trajectory with local curvature
F
= mv
2
/R but dont speed the particle up or slow it down. This really simplies problem solving,
as we shall see.
We should think about using time-independent work and energy instead of time dependent
Newtonian dynamics whenever the answer requested for a given problem is independent of time. The
reason for this should now be clear: we derived the work-energy theorem (and energy conservation)
from the elimination of t from the dynamical equations.
Lets look at a few examples to see how work and energy can make our problem solving lives
much better.
Example 3.1.1: Pulling a Block
T
M

Figure 35: A block is connected to an Acme (massless, unstretchable) string and is pulled so that it
exerts a constant tension T on the block at the angle .
Suppose we have a block of mass m being pulled by a string at a constant tension T at an angle
with the horizontal along a rough table with coecients of friction
s
>
k
. Typical questions
might be: At what value of the tension does the block begin to move? If it is pulled with exactly
that tension, how fast is it moving after it is pulled a horizontal distance L?
We see that in the y-direction, N +T sin() mg = 0, or N = mg T sin(). In the x-direction,
F
x
= T cos()
s
N = 0 (at the point where block barely begins to move).
Therefore:
T cos()
s
mg +T
s
sin() = 0 (260)
or
T =

s
mg
cos() +
s
sin()
(261)
With this value of the tension T, the work energy theorem becomes:
W = F
x
L = K (262)
where F
x
= T cos()
k
(mg T sin(). That is:
(T cos()
k
(mg T sin()) L =
1
2
mv
2
f
0 (since v
i
= 0) (263)
or (after a bit of algebra, substituting in our value for T from the rst part):
v
f
=
_
2
s
gLcos()
cos() +
s
sin()
2
k
gL +
2
k
s
gLsin()
cos() +
s
sin()
_1
2
(264)
Although it is dicult to check exactly, we can see that if
k
=
s
, v
f
= 0 (or the mass doesnt
accelerate). This is consistent with our value of T the value at which the mass will exactly not
move against
s
alone, but will still move if tapped to get it started so that static friction falls
back to weaker dynamic friction.
This is an example of how we can combine Newtons Laws or statics with work and energy for
dierent parts of the same problem. So is the next example:
Example 3.1.2: Range of a Spring Gun
x
H
R?
Figure 36: A simple spring gun is red horizontally a height H above the ground. Compute its
range R.
Suppose we have a spring gun with a bullet of mass m compressing a spring with force constant
k a distance x. When the trigger is pulled, the bullet is released from rest. It passes down a
horizontal, frictionless barrel and comes out a distance H above the ground. What is the range of
the gun?
If we knew the speed that the bullet had coming out of the barrel, wed know exactly how to
solve this as in fact we have solved it for homework (although you shouldnt look see if you can
do this on your own or anticipate the answer below for the extra practice and review). To nd
that speed, we can use the Work-Kinetic Energy Theorem if we can compute the work done by the
spring!
So our rst chore then is to compute the work done by the spring that is initially compressed a
distance x, and use that in turn to nd the speed of the bullet leaving the barrel.
W =
_
x
0
x
1
k(x x
0
)dx (265)
=
1
2
k(x x
0
)
2
|
x
0
x
1
(266)
=
1
2
k(x)
2
=
1
2
mv
2
f
0 (267)
or
v
f
=
_
k
m
|x| (268)
As you can see, this was pretty easy. It is also a result that we can get no other way, so far,
because we dont know how to solve the equations of motion for the mass on the spring to nd x(t),
solve for t, nd v(t), substitute to nd v and so on. If we hadnt derived the WKE theorem for
non-constant forces wed be screwed!
The rest should be familiar. Given this speed (in the x-direction), nd the range from Newtons
Laws:
F = mg y (269)
or a
x
= 0, a
y
= g, v
0x
= v
f
, v
0y
= 0, x
0
= 0, y
0
= H. Solving as usual, we nd:
R = v
x0
t
0
(270)
= v
f
2H
g
(271)
=
2kH
mg
|x| (272)
where you can either ll in the details for yourself or look back at your homework. Or get help, of
course. If you cant do this second part on your own at this point, you probably should get help,
seriously.
3.2: Conservative Forces: Potential Energy
1
2
x
C
x
Figure 37: The work done going around an arbitrary loop by a conservative force is zero. This
ensures that the work done going between two points is independent of the path taken, its dening
characteristic.
We have now seen two kinds of forces in action. One kind is like gravity. The work done by
gravity doesnt depend on the path taken through the gravitational eld it only depends on the
relative height of the two endpoints. The other kind is like friction. It not only depends on the path,
it is (almost) always negative work, as typically friction dissipates kinetic energy as heat.
We dene a conservative force to be one such that the work done by the force as you move a
mass from point x
1
to point x
2
is independent of the path used to move between the points:
In this case (only), the work done going around an arbitrary closed path (starting and ending
on the same point) will be identically zero!
W
loop
=
_
C
F d
l = 0 (273)
This is illustrated in gure 37. Note that the two paths from x
1
to x
2
combine to form a closed
loop C, where the work done going forward along one path is undone coming back along the other.
Since the work done moving a mass m from an arbitrary starting point to any point in space is
the same independent of the path, we can assign each point in space a numerical value: the work
done by us on mass m, against the conservative force, to reach it. This is the negative of the work
done by the force. We do it with this sign for reasons that will become clear in a moment. We call
this function the potential energy of the mass m associated with the conservative force
F:
U(x) =
_
x
x
0
F dx = W (274)
Note Well: that only one limit of integration depends on x; the other depends on where you
choose to make the potential energy zero. This is a free choice. No physical result that can be
measured or observed can uniquely depend on where you choose the potential energy to be zero.
Lets understand this.
3.2.1: Force from Potential Energy
In one dimension, the x-component of
F d
is:
dU = dW = F
x
dx (275)
If we rearrange this, we get:
F
x
=
dU
dx
(276)
That is, the force is the slope of the potential energy function. This is actually a rather profound
result and relationship.
U(x)
+x
Figure 38: A tiny subset of the innite number of possible U(x) functions that might lead to the
same physical force F
x
(x). One of these is highlighted by means of a thick line, but the only thing
that might make it preferred is whether or not it makes solving any given problem a bit easier.
Consider the set of transformations that leave the slope of a function invariant. One of them is
quite obvious adding a positive or negative constant to U(x) as portrayed in gure 38 does not
aect its slope with respect to x, it just moves the whole function up or down on the U-axis. That
means that all of this innite set of candidate potential energies that dier by only a constant overall
energy lead to the same force!
Thats good, as force is something we can often measure, even at a point (without necessarily
moving the object), but potential energy is not. To measure the work done by a conservative force
on an object (and hence measure the change in the potential energy) we have to permit the force to
move the object from one place to another and measure the change in its speed, hence its kinetic
energy. We only measure a change, though we cannot directly measure the absolute magnitude of
the potential energy, any more than we can point to an object and say that the work of that object
is zero Joules, or ten Joules, or whatever. We can talk about the amount of work done moving the
object from here to there but objects do not possess work as an attribute, and potential energy
is just a convenient renaming of the work, at least so far.
I cannot, then, tell you precisely what the near-Earth gravitational potential energy of a 1
kilogram mass sitting on a table is, not even if you tell me exactly where the table and the mass are
in some sort of Universal coordinate system (where if the latter exists, as now seems dubious given
our discussion of inertial frames and so on, we have yet to nd it). There are literally an innity of
possible answers that will all equally well predict the outcome of any physical experiment involving
near-Earth gravity acting on the mass, because they all lead to the same force acting on the object.
In more than one dimesion we have to use a bit of vector calculus to write this same result per
component:
U =
_

F d
(277)
dU =
F d
(278)
Its a bit more work than we can do in this course to prove it, but the result one gets by dividing
through but d
in this case is:
F =
U =
U
x
x
U
y
y
U
z
z (279)
which is basically the one dimensional result written above, per component. If you are a physics or
math major (or have had or are in multivariate calculus) this last form should be studied until it
makes sense, but everybody should know the rst form (per component) and should be able to see
that it should reasonably hold (subject to working out some more math than you may yet know)
for all coordinate directions. Note that non-physics majors wont (in my classes) be held responsible
for knowing this vector calculus form, but everybody should understand the concept underlying it.
Well discuss this a bit further below, after we have learned about the total mechanical energy.
So much for the denition of a conservative force, its potential energy, and how to get the force
back from the potential energy and our freedom to choose add a constant energy to the potential
energy and still get the same answers to all physics problems
83
we had a perfectly good theorem, the
Work-Kinetic Energy Theorem Why do we bother inventing all of this complication, conservative
forces, potential energies? What was wrong with plain old work?
Well, for one thing, since the work done by conservative forces is independent of the path taken
by denition, we can do the work integrals once and for all for the well-known conservative forces,
stick a minus sign in front of them, and have a set of well-known potential energy functions that
are generally even simpler and more useful. In fact, since one can easily dierentiate the potential
energy function to recover the force, one can in fact forget thinking in terms of the force altogether
and formulate all of physics in terms of energies and potential energy functions!
In this class, we wont go to this extreme we will simply learn both the forces and the associated
potential energy functions where appropriate (there arent that many, this isnt like learning all of
organic chemistrys reaction pathways or the like), deriving the second from the rst as we go, but in
future courses taken by a physics major, a chemistry major, a math major it is quite likely that you
will relearn even classical mechanics in terms of the Lagrangian
84
or Hamiltonian
85
formulation,
both of which are fundamentally energy-based, and quantum physics is almost entirely derived and
understood in terms of Hamiltonians.
For now lets see how life is made a bit simpler by deriving general forms for the potential energy
functions for near-Earth gravity and masses on springs, both of which will be very useful indeed to
us in the weeks to come.
83
Wikipedia: http://www.wikipedia.org/wiki/Gauge Theory. For students intending to continue with more physics,
this is perhaps your rst example of an idea called Gauge freedom the invariance of things like energy under certain
sets of coordinate transformations and the implications (like invariance of a measured force) of the symmetry groups
of those transformations which turns out to be very important indeed in future courses. And if this sounds strangely
like Im speaking Martian to you or talking about your freedom to choose a 12 gauge shotgun instead of a 20 gauge
shotgun gauge freedom indeed well, dont worry about it...
84
Wikipedia: http://www.wikipedia.org/wiki/Lagrangian.
85
Wikipedia: http://www.wikipedia.org/wiki/Hamiltonian.
3.2.2: Potential Energy Function for Near-Earth Gravity
The potential energy of an object experiencing a near-Earth gravitational force is either:
U
g
(y) =
_
y
0
(mg)dy
= mgy (280)
where we have eectively set the zero of the potential energy to be ground level, at least if we put
the y-coordinate origin at the ground. Of course, we dont really need to do this we might well
want the zero to be at the top of a table over the ground, or the top of a cli well above that, and
we are free to do so. More generally, we can write the gravitational potential energy as the indenite
integral:
U
g
(y) =
_
(mg)dy = mgy +U
0
(281)
where U
0
is an arbitrary constant that sets the zero of gravitational potential energy. For example,
suppose we did want the potential energy to be zero at the top of a cli of height H, but for one
reason or another selected a coordinate system with the y-origin at the bottom. Then we need:
U
g
(y = H) = mgH +U
0
= 0 (282)
or
U
0
= mgH (283)
so that:
U
g
(y) = mgy mgH = mg(y H) = mgy
(284)
where in the last step we changed variables (coordinate systems) to a new one y
= y H with the
origin at the top of the cli!
From the latter, we see that our freedom to choose any location for the zero of our potential
energy function is somehow tied to our freedom to choose an arbitrary origin for our coordinate
frame. It is actually even more powerful (and more general) than that we will see examples later
where potential energy can be dened to be zero on entire planes or lines or at innity, where of
course it is dicult to put an origin at innity and have local coordinates make any sense.
You will nd it very helpful to choose a coordinate system and set the zero of potential energy
in such as way as to make the problem as computationally simple as possible. Only experience and
practice will ultimately be your best guide as to just what those are likely to be.
3.2.3: Springs
Springs also exert conservative forces in one dimension the work you do compressing or stretching
an ideal spring equals the work the spring does going back to its original position, whatever that
position might be. We can therefore dene a potential energy function for them.
In most cases, we will choose the zero of potential energy to be the equilibrium position of the
spring other choices are possible, though, and one in particular will be useful (a mass hanging
from a spring in near-Earth gravity).
With the zero of both our one dimensional coordinate system and the potential energy at the
equilibrium position of the unstretched spring (easiest) Hookes Law is just:
F
x
= kx (285)
and we get:
U
s
(x) =
_
x
0
(kx
) dx
=
1
2
kx
2
(286)
This is the function you should learn by deriving this result several times on your own, not by
memorizing as the potential energy of a spring.
More generally, if we do the indenite integral in this coordinate frame instead we get:
U(x) =
_
(kx) dx =
1
2
kx
2
+U
0
(287)
To see how this is related to ones choice of coordinate origin, suppose we choose the origin of
coordinates to be at the end of the spring xed to a wall, so that the equilibrium length of the
unstretched, uncompressed spring is x
eq
. Hookes Law is written in these coordinates as:
F
x
(x) = k(x x
eq
) (288)
Now we can choose the zero of potential energy to be at the position x = 0 by doing the denite
integral:
U
s
(x) =
_
x
0
(k(x
x
eq
)) dx
=
1
2
k(x x
eq
)
2
1
2
kx
2
eq
(289)
If we now change variables to, say, y = x x
eq
, this is just:
U
s
(y) =
1
2
ky
2
1
2
kx
2
eq
=
1
2
ky
2
+U
0
(290)
which can be compared to the indenite integral form above. Later, well do a problem where a mass
hangs from a spring and see that our freedom to add an arbitrary constant of integration allows us
to change variables to an easier origin of coordinates halfway through a problem.
Consider: our treatment of the spring gun (above) would have been simpler, would it not, if we
could have simply started knowing the potential energy function for (and hence the work done by)
a spring?
There is one more way that using potential energy instead of work per se will turn out to be useful
to us, and it is the motivation for including the leading minus sign in its denition. Suppose that you
have a mass m that is moving under the inuence of a conservative force. Then the Work-Kinetic
Energy Theorem (258) looks like:
W
C
= K (291)
where W
C
is the ordinary work done by the conservative force. Subtracting W
C
over to the other
side and substituting, one gets:
K W
C
= K + U = 0 (292)
Since we can now assign U(x) a unique value (once we set the constant of integration or place(s)
U(x) is zero in its denition above) at each point in space, and since K is similarly a function of
position in space when time is eliminated in favor of position and no other (non-conservative) forces
are acting, we can dene the total mechanical energy of the particle to be:
E
mech
= K +U (293)
in which case we just showed that
E
mech
= 0 (294)
Wait, did we just prove that E
mech
is a constant any time a particle moves around under only
the inuence of conservative forces? We did...
3.3: Conservation of Mechanical Energy
OK, so maybe you missed that last little bit. Lets make it a bit clearer and see how enormously
useful and important this idea is.
First we will state the principle of the Conservation of Mechanical Energy:
The total mechanical energy (dened as the sum of its potential and kinetic energies) of
a system moving in a conservative force eld is constant.
Or (in much more concise algebra), if only conservative forces act on an object and U is the potential
energy function for the total conservative force, then
E
mech
= K +U = A scalar constant (295)
The proof of this statement is given above, but we can recapitulate it here.
Suppose
E
mech
= K +U (296)
Because the change in potential energy of an object is just the path-independent negative work done
by the conservative force,
K + U = K W
C
= 0 (297)
is just a restatement of the WKE Theorem, which we derived and proved. So it must be true! But
then
K + U = (K +U) = E
mech
= 0 (298)
and E
mech
must be constant as the conservative force moves the mass(es) around.
3.3.1: Force, Potential Energy, and Total Mechanical Energy
Now that we know what the total mechanical energy is, the following little litany might help you
conceptually grasp the relationship between potential energy and force. We will return to this still
again below, when we talk about potential energy curves and equilibrium, but repetition makes the
ideas easier to understand and remember, so skim it here rst, now.
The fact that the force is the negative derivative of (or gradient of) the potential energy of an
object means that the force points in the direction the potential energy decreases in.
This makes sense. If the object has a constant total energy, and it moves in the direction of the
force, it speeds up! Its kinetic energy increases, therefore its potential energy decreases. If it moves
from lower potential energy to higher potential energy, its kinetic energy decreases, which means
the force pointed the other way, slowing it down.
There is a simple metaphor for all of this the slope of a hill. We all know that things roll slowly
down a shallow hill, rapidly down a steep hill, and just fall right o of clis. The force that speeds
them up is related to the slope of the hill, and so is the rate at which their gravitational potential
energy increases as one goes down the slope! In fact, it isnt actually just a metaphor, more like an
example.
Either way, downhill is where potential energy variations push objects in the direction that
the potential energy maximally decreases, with a force proportional to the rate at which it decreases.
The WKE Theorem itself and all of our results in this chapter, after all, are derived from Newtons
Second Law energy conservation is just Newtons Second Law in a time-independent disguise.
Example 3.3.1: Falling Ball Reprise
To see how powerful this is, let us look back at a falling object of mass m (neglecting drag and
friction). First, we have to determine the gravitational potential energy of the object a height y
above the ground (where we will choose to set U(0) = 0):
U(y) =
_
y
0
(mg)dy = mgy (299)
Wow, that was kind of easy!
Now, suppose we have our ball of mass m at the height H and drop it from rest, yadda yadda.
How fast is it going when it hits the ground? This time we simply write the total energy of the ball
at the top (where the potential is mgH and the kinetic is zero) and the bottom (where the potential
is zero and kinetic is
1
2
mv
2
) and set the two equal! Solve for v, done:
E
i
= mgH + (0) = (0) +
1
2
mv
2
= E
f
(300)
or
v =
_
2gH (301)
Even better:
Example 3.3.2: Block Sliding Down Frictionless Incline Reprise
The block starts out a height H above the ground, with potential energy mgH and kinetic energy
of 0. It slides to the ground (no non-conservative friction!) and arrives with no potential energy and
kinetic energy
1
2
mv
2
. Whoops, time to block-copy the previous solution:
E
i
= mgH + (0) = (0) +
1
2
mv
2
= E
f
(302)
or
v =
_
2gH (303)
Example 3.3.3: A Simple Pendulum
Here are two versions of a pendulum problem: Imagine a pendulum (ball of mass m suspended on a
string of length L that we have pulled up so that the ball is a height H < L above its lowest point on
the arc of its stretched string motion. We release it from rest. How fast is it going at the bottom?
Yep, you guessed it block copy again:
E
i
= mgH + (0) = (0) +
1
2
mv
2
= E
f
(304)
or
v =
_
2gH (305)
It looks as though it does not matter what path a mass takes as it goes down a height H starting
from rest as long as no forces act to dissipate energy, it will arrive at the bottom travelling at the
same speed.
Heres the same problem, formulated a dierent way: A mass m is hanging by a massless thread
of length L and is given an initial speed v
0
to the right (at the bottom). It swings up and stops at
some maximum height H at an angle as illustrated in gure 39 (which can be used backwards
as the gure for the rst part of this example, of course). Find .
v
0
L
m
L
H
Figure 39: Find the maximum angle through which the pendulum swings from the initial conditions.
Again we solve this by setting E
i
= E
f
(total energy is conserved).
Initial:
E
i
=
1
2
mv
2
0
+mg(0) =
1
2
mv
2
0
(306)
Final:
E
f
=
1
2
m(0)
2
+mgH = mgL(1 cos()) (307)
(Note well: H = L(1 cos())!)
Set them equal and solve:
cos() = 1
v
2
0
2gL
(308)
or
= cos
1
(1
v
2
0
2gL
). (309)
Example 3.3.4: Looping the Loop
H
R
v
m
Figure 40:
Here is a lovely problem so lovely that you will solve it ve or six times, at least, in various
forms throughout the semester, so be sure that you get to where you understand it that requires
you to use three dierent principles weve learned so far to solve:
What is the minimum height H such that a block of mass m loops-the-loop (stays on the
frictionless track all the way around the circle) in gure 40 above?
Such a simple problem, such an involved answer. Heres how you might proceed. First of all,
lets understand the condition that must be satised for the answer stay on the track. For a block
to stay on the track, it has to touch the track, and touching something means exerting a normal
force on it in physicsspeak. To barely stay on the track, then the minimal condition is for the
normal force to barely go to zero.
Fine, so we need the block to precisely kiss the track at near-zero normal force at the point
where we expect the normal force to be weakest. And where is that? Well, at the place it is moving
the slowest, that is to say, the top of the loop. If it comes o of the loop, it is bound to come o at
or before it reaches the top.
Why is that point key, and what is the normal force doing in this problem. Here we need two
physical principles: Newtons Second Law and the kinematics of circular motion since the
mass is undoubtedly moving in a circle if it stays on the track. Heres the way we reason: If the
block moves in a circle of radius R at speed v, then its acceleration towards the center must be
a
c
= v
2
/R. Newtons Second Law then tells us that the total force component in the direction of
the center must be mv
2
/R. That force can only be made out of (a component of) gravity and the
normal force, which points towards the center. So we can relate the normal force to the speed of the
block on the circle at any point.
At the top (where we expect v to be at its minimum value, assuming it stays on the circle)
gravity points straight towards the center of the circle of motion, so we get:
mg +N =
mv
2
R
(310)
and in the limit that N 0 (barely looping the loop) we get the condition:
mg =
mv
2
t
R
(311)
where v
t
is the (minimum) speed at the top of the track needed to loop the loop.
Now we need to relate the speed at the top of the circle to the original height H it began at.
This is where we need our third principle Conservation of Mechanical Energy! Note that we
cannot possible integrate Newtons Second Law and solve an equation of motion for the block on
the frictionless track I havent given you any sort of equation for the track (because I dont know
it) and even a physics graduate student forced to integrate N2 to nd the answer for some relatively
simple functional form for the track would suer mightily nding the answer. With energy we
dont care about the shape of the track, only that the track do no work on the mass which (since it
is frictionless and normal forces do no work) is in the bag.
Thus:
E
i
= mgH = mg2R +
1
2
mv
2
t
= E
f
(312)
If you put these two equations together (e.g. solve the rst for mv
2
t
and substitute it into the
second, then solve for H in terms of R) you should get H
min
= 5R/2. Give it a try. Youll get
even more practice in your homework, for some more complicated situations, for masses on strings
or rods theyre all the same problem, but sometimes the Newtons Law condition will be quite
dierent! Use your intuition and experience with the world to help guide you to the right solution
in all of these causes.
So any time a mass moves down a distance H, its change in potential energy is mgH, and since
total mechanical energy is conserved, its change in kinetic energy is also mgH the other way. As
one increases, the other decreases, and vice versa!
This makes kinetic and potential energy bone simple to use. It also means that there is a
lovely analogy between potential energy and your savings account, kinetic energy and your checking
account, and cash transfers (conservative movement of money from checking to savings or vice versa
where your total account remains constant.
Of course, it is almost too much to expect for life to really be like that. We know that we always
have to pay banking fees, teller fees, taxes, somehow we never can move money around and end up
with as much as we started with. And so it is with energy.
Well, it is and it isnt. Actually conservation of energy is a very deep and fundamental principle
of the entire Universe as best we can tell. Energy seems to be conserved everywhere, all of the time,
in detail, to the best of our ability to experimentally check. However, useful energy tends to decrease
over time because of taxes. The tax collectors, as it were, of nature are non-conservative forces!
What happens when we try to combine the work done by non-conservative forces (which we must
tediously calculate per problem, per path) with the work done by conservative ones, expressed in
terms of potential and total mechanical energy? You get the...
3.4: Generalized Work-Mechanical Energy Theorem
So, as suggested above lets generalize the WKE one further step by considering what happens if
more than one (kind) of force is present (both conservative and nonconservative). In that case the
argument above becomes:
W
tot
= W
C
+W
NC
= K (313)
or
W
NC
= K W
C
= K + U = E
mech
(314)
which we state as the Generalized Non-Conservative Work-Mechanical Energy Theorem:
The work done by all the non-conservative forces acting on a system equals the change
in its total mechanical energy.
Our example here is very simple.
Example 3.4.1: Block Sliding Down a Rough Incline
Suppose a block of mass m slides down an incline of length L at an incline with respect to the
horizontal and with kinetic friction (coecient
k
) acting against gravity. How fast is it going
(released from rest at an angle where static friction cannot hold it) when it reaches the ground?
Here we have to do a mixture of several things. First, lets write Newtons Second Law for just
the (static) y direction:
N mg cos() = 0 (315)
or
N = mg cos() (316)
Next, evaluate:
f
k
=
k
N =
k
mg cos() (317)
(up the incline, opposite to the motion of the block).
We ignore dynamics in the direction down the plane. Instead, we note that the work done by
friction is equal to the change in the mechanical energy of the block. E
i
= mgH = mgLsin().
E
f
=
1
2
mv
2
. So:
k
mgLcos() = E
f
E
i
=
1
2
mv
2
mgH (318)
or
1
2
mv
2
= mgH
k
mgLcos() (319)
so that:
v =
_
2gH
k
2gLcos() (320)
Here we really do have to be careful and choose the sign that means going down the incline at the
bottom.
As an extra bonus, our answer tells us the condition on (say) the angle such that the mass
doesnt or just barely makes it to the bottom. v = 0 means barely (gets there and stops) and if
v is imaginary, it doesnt make all the way to the bottom at all.
I dont know about you, but this seems a lot easier than messing with integrating Newtons Law,
solving for v(t) and x(t), solving for t, back substituting, etc. Its not that this is all that dicult,
but work-energy is simple bookkeeping, anybody can do it if they just know stu like the form of
the potential energy, the magnitude of the force, some simple integrals.
Heres another example.
Example 3.4.2: A Spring and Rough Incline
m
k
x
H
max
Figure 41: A spring compressed an initial distance x res a mass m across a smooth (
k
0) oor
to rise up a rough
k
= 0) incline. How far up the incline does it travel before coming to rest?
In gure 41 a mass m is released from rest from a position on a spring with spring constant k
compressed a distance x from equilibrium. It slides down a frictionless horizontal surface and then
slides up a rough plane inclined at an angle . What is the maximum height that it reaches on the
incline?
This is a problem that is basically impossible, so far, for us to do using Newtons Laws alone.
This is because we are weeks away from being able to solve the equation of motion for the mass on
the spring! Even if/when we can solve the equation of motion for the mass on the spring, though,
this problem would still be quite painful to solve using Newtons Laws and dynamical solutions
directly.
Using the GWME Theorem, though, it is pretty easy. As before, we have to express the initial
total mechanical energy and the nal total mechanical energy algebraically, and set their dierence
equal to the non-conservative work done by the force of kinetic friction sliding up the incline.
Im not going to do every step for you, as this seems like it would be a good homework problem,
but here are a few:
E
i
= U
gi
+U
si
+K
i
= mg(0) +
1
2
kx
2
+
1
2
m(0)
2
=
1
2
kx
2
(321)
E
f
= U
gf
+K
f
= mgH
max
+
1
2
m(0)
2
= mgH
max
(322)
Remaining for you to do: Find the force of friction down the incline (as it slides up). Find
the work done by friction. Relate that work to H
max
algebraically, write the GWME Theorem
algebraically, and solve for H
max
. Most of the steps involving friction and the inclined plane can be
found in the previous example, if you get stuck, but try to do it without looking rst!
3.4.1: Heat and Conservation of Energy
What happens to the energy removed by things like non-conservative kinetic friction and drag? Both
of these remove kinetic energy from a moving mass (usually) and turn it into heat. Heat, as it turns
out, is energy microscopic energy but it is also microscopic random energy, too disorganized to
be of much use to do nice, organized work. A whole branch of physics (Thermodynamics) exists
to help us understand the relationships between heat and temperature and work and all that. It is
beyond the scope of this course (due simply to time constraints) but it is worth remembering that
microscopically the total energy of the Universe is conserved, even as some of that energy goes from
useful and usable forms to less usable forms.
Heat can also ow into a system and increase its total energy, but unless the system in question
is a rather complicated heat engine it doesnt have a tendency to turn into work. Heat engines and
refrigerators are things that do convert heat to work or move heat around with work. For most of
the problems we solve in this course we can largely ignore heat at a dynamical inuence, but it is
nevertheless important to remember that it is there, the nal dumping ground for nearly any kind
of organized energy, sooner or later.
3.5: Power
The energy in a given system is not, of course, usually constant in time. Energy is added to a given
mass, or taken away, at some rate. We accelerate a car (adding to its mechanical energy). We brake
a car (turning its kinetic energy into heat). There are many times when we are given the rate at
which energy is added or removed in time, and need to nd the total energy added or removed. This
rate is called the power.
Power: The rate at which work is done, or energy released into a system.
This latter form lets us express it conveniently for time-varying forces:
dW =

F dx =

F
dx
dt
dt (323)
or
P =
dW
dt
=

F v (324)
so that
W = E
tot
=
_
Pdt (325)
The units of power are clearly Joules/sec = Watts. Another common unit of power is Horse-
power, 1 HP = 746 W. Note that the power of a car together with its drag coecient determine
how fast it can go. When energy is being added by the engine at the same rate at which it is being
dissipated by drag and friction, the total mechanical energy of the car will remain constant in time.
Example 3.5.1: Rocket Power
A model rocket engine delivers a constant thrust F that pushes the rocket (of approximately constant
mass m) up for a time t
r
before shutting o. Show that the total energy delivered by the rocket
engine is equal to the change in mechanical energy the hard way by solving Newtons Second Law
for the rocket to obtain v(t), using that to nd the power P, and integrating the power from 0 to
t
r
to nd the total work done by the rocket engine, and comparing this to mgy(t
r
) +
1
2
mv(t
r
)
2
, the
total mechanical energy of the rocket at time t
r
.
To outline the solution, following a previous homework problem, we write:
F mg = ma (326)
or
a =
F mg
m
(327)
We integrate twice to obtain (starting at y(0) = 0 and v(0) = 0):
v(t) = at =
F mg
m
t (328)
y(t) =
1
2
at
2
=
1
2
F mg
m
t
2
(329)
(330)
From this we can nd:
E
mech
(t
r
) = mgy(t
r
) +
1
2
mv(t
r
)
2
= mg
1
2
F mg
m
t
2
r
+
1
2
m
_
F mg
m
t
r
_
2
=
1
2
_
Fg mg
2
+
F
2
m
+mg
2
2Fg
_
t
2
r
=
1
2m
_
F
2
Fmg
_
t
2
r
(331)
Now for the power:
P = F v = Fv(t)
=
F
2
Fmg
m
t (332)
We integrate this from 0 to t
r
to nd the total energy delivered by the rocket engine:
W =
_
t
r
0
P dt =
1
2m
_
F
2
Fmg
_
t
2
r
= E
mech
(t
r
) (333)
For what it is worth, this should also just be W = F y(t
r
), the force through the distance:
W = F
1
2
F mg
m
t
2
r
=
1
2m
_
F
2
Fmg
_
t
2
r
(334)
and it is.
The main point of this example is to show that all of the denitions and calculus above are
consistent. It doesnt matter how you proceed compute E
mech
, nd P(t) and integrate, or just
straight up evaluate the work W = Fy, you will get the same answer.
Power is an extremely important quantity, especially for engines because (as you see) the faster
you go at constant thrust, the larger the power delivery. Most engines have a limit on the amount
of power they can generate. Consequently the forward directed force or thrust tends to fall o as the
speed of the e.g. rocket or car increases. In the case of a car, the car must also overcome a (probably
nonlinear!) drag force. One of your homework problems explores the economic consequences of this.
3.6: Equilibrium
Recall that the force is given by the negative gradient of the potential energy:
F =
U (335)
or (in each direction
86
):
F
x
=
dU
dx
, F
y
=
dU
dy
, F
z
=
dU
dz
(336)
or the force is the negative slope of the potential energy function in this direction. As discussed
above, the meaning of this is that if a particle moves in the direction of the (conservative) force, it
speeds up. If it speeds up, its kinetic energy increases. If its kinetic energy increases, its potential
energy must decrease. The force (component) acting on a particle is thus the rate at which the
potential energy decreases (the negative slope) in any given direction as shown.
In the discussion below, we will concentrate on one-dimensional potentials to avoid overstress-
ing students calculus muscles while they are still under development, but the ideas all generalize
beautifully to two or three (or in principle still more) dimensions.
U(x)
F = 0 Equilibrium
F
F
x
b a
Figure 42: A one-dimensional potential energy curve U(x). This particular curve might well rep-
resent U(x) =
1
2
kx
2
for a mass on a spring, but the features identied and classied below are
generic.
In one dimension, we can use this to rapidly evaluate the behavior of a system on a qualitative
basis just by looking at a graph of the curve! Consider the potential energy curves in gure 42. At
the point labelled a, the x-slope of U(x) is positive. The x (component of the) force, therefore, is
in the negative x direction. At the point b, the x-slope is negative and the force is correspondingly
positive. Note well that the force gets larger as the slope of U(x) gets larger (in magnitude).
The point in the middle, at x = 0, is special. Note that this is a minimum of U(x) and hence
the x-slope is zero. Therefore the x-directed force F at that point is zero as well. A point at which
the force on an object is zero is, as we previously noted, a point of static force equilibrium a
particle placed there at rest will remain there at rest.
In this particular gure, if one moves the particle a small distance to the right or the left of the
equilibrium point, the force pushes the particle back towards equilibrium. Points where the force is
zero and small displacements cause a restoring force in this way are called stable equilibrium points.
As you can see, the isolated minima of a potential energy curve (or surface, in higher dimensions)
are all stable equilibria.
86
Again, more advanced math or physics students will note that these should all be partial derivatives in correspon-
dance with the force being the gradient of the potential energy surface U(x, y, z), but even then each component is
the local slope along the selected direction.
U(r)
Unstable Equilibrium
Stable Equilibrium
F
Neutral Equilibrium
r
Figure 43: A fairly generic potential energy shape for microscopic (atomic or molecular) interactions,
drawn to help exhibits features one might see in such a curve more than as a realistically scaled
potential energy in some set of units. In particular, the curve exhibits stable, unstable, and neutral
equilibria for a radial potential energy as a fuction of r, the distance between two e.g. atoms.
Figure 43 corresponds to a more useful generic atomic or molecular interaction potential energy.
It corresponds roughly to a Van der Waals Force
87
between two atoms or molecules, and exhibits
a number of the features that such interactions often have.
At very long ranges, the forces between neutral atoms are extremely small, eectively zero. This
is illustrated as an extended region where the potential energy is at for large r. Such a range is
called neutral equilibrium because there are no forces that either restore or repel the two atoms.
Neutral equilibrium is not stable in the specic sense that a particle placed there with any non-
zero velocity will move freely (according to Newtons First Law). Since it is nearly impossible to
prepare an atom at absolute rest relative to another particle, one basically never sees two unbound
microscopic atoms with a large, perfectly constant spatial orientation.
As the two atoms near one another, their interaction becomes rst weakly attractive due to e.g.
quantum dipole-induced dipole interactions and then weakly repulsive as the two atoms start to
touch each other. There is a potential energy minimum in between where two atoms separated
by a certain distance can be in stable equilibrium without being chemically bound.
Atoms that approach one another still more closely encounter a second potential energy well that
is at rst strongly attractive (corresponding, if you like, to an actual chemical interaction between
them) followed by a hard core repulsion as the electron clouds are prevented from interpenetrating
by e.g. the Pauli exclusion principle. This second potential energy well is often modelled by a
Lennard-Jones potential energy (or 6-12 potential energy, corresponding to the inverse powers of
r used in the model
88
. It also has a point of stable equilibrium.
In between, there is a point where the growing attraction of the inner potential energy well
and the growing repulsion of the outer potential energy well balance, so that the potential energy
function has a maximum. At this maximum the slope is zero (so it is a position of force equilibrium)
but because the force on either side of this point pushes the particle away from it, this is a point
of unstable equilibrium. Unstable equilibria occur at isolated maxima in the potential energy
87
Wikipedia: http://www.wikipedia.org/wiki/Van der Waals Force.
88
Wikipedia: http://www.wikipedia.org/wiki/Lennard-Jones Potential. We will learn the dierence between a po-
tential energy and a potential later in this course, but for the moment it is not important. The shapes of the two
curves are eectively identical.
function, just as stable equilibria occur at isolated minima.
Note for advanced students: In more than one dimension, a potential energy curve can have
saddle points that are maxima in one dimension and minima in another (so called because the
potential energy surface resembles the surface of a saddle, curved up front-to-back to hold the
rider in and curved down side to side to allow the legs to straddle the horse). Saddle points are
unstable equilibria (because instability in any direction means unstable) and are of some conceptual
importance in more advanced studies of physics or in mathematics when considering asymptotic
convergence.
3.6.1: Energy Diagrams: Turning Points and Forbidden Regions
U(r)
r b a
c c
b b
c
E
a
E
K < 0 forbidden
b
E
Quadratic region
Classically forbidden domains (shaded)
K = E U > 0 allowed
Figure 44: The same potential energy curve, this time used to illustrate turning points and classically
allowed and forbidden regions. Understanding the role of the total energy on potential energy
diagrams and how transitions from a higher energy state to a lower energy state can bind a
system provide insight into chemistry, orbital dynamics, and more.
We now turn to another set of extremely useful information one can extract from potential
energy curves in cases where one knows the total mechanical energy of the particle in addition to
the potential energy curve. In gure 44 we again see the generic (Van der Waals) atomic interaction
curve this time rather decorated with information. To understand this information and how to
look at the diagram and gain insight, please read the following description very carefully while
following along in the gure.
Consider a particle with total energy mechanical E
a
. Since the total mechanical energy is a
constant, we can draw the energy in on the potential energy axes as a straight line with zero slope
the same value for all r. Now note carefully that:
K(r) = E
mech
U(r) (337)
which is the dierence between the total energy curve and the potential energy curve. The kinetic
energy of a particle is
1
2
mv
2
which is non-negative. This means that we can never observe a particle
with energy E
a
to the left of the position marked a on the r-axis only point where E
a
U lead
to K > 0. We refer to the point a as a turning point of the motion for any given energy when
r = a, E
mech
= E
a
= U(a) and K(a) = 0.
We can interpret the motion associated with E
a
very easily. An atom comes in at more or less
a constant speed from large r, speeds and slows and speeds again as it reaches the support of the
potential energy
89
, collides with the central atom at r = 0 (strongly repelled by the hard core
interaction) and recoils, eventually receding from the central atom at more or less the same speed
it initially came in with. Its distance of closest approach is r = a.
Now consider a particle coming in with energy E
mech
= E
b
. Again, this is a constant straight
line on the potential energy axes. Again K(r) = E
b
U(r) 0. The points on the r-axis labelled
b are the turning points of the motion, where K(b) = 0. The shaded regions indicate classically
forbidden regions where the kinetic energy would have to be negative for the particle (with
the given total energy) to be found there. Since the kinetic energy can never be negative, the atom
can never be found there.
Again we can visualize the motion, but now there are two possibilities. If the atom comes in
from innity as before, it will initially be weakly attracted ultimately be slowed and repelled not by
the hard core, but by the much softer force outside of the unstable maximum in U(r). This sort of
soft collision is an example of an interaction barrier a chemical reaction that cannot occur at
low temperatures (where the energy of approach is too low to overcome this initial repulsion and
allow the atoms to get close enough to chemically interact.
However, a second possibility emerges. If the separation of the two atoms (with energy E
b
,
recall) is in the classically allowed region between the two inner turning points, then the atoms
will oscillate between those two points, unable to separate to innity without passing through the
classically forbidden region that would require the kinetic energy to be negative. The atoms in this
case are said to be bound in a classically stable conguration around the stable equilibrium point
associated with this well.
In nature, this conguration is generally not stably bound with an energy E
b
> 0 quantum
theory permits an atom outside with this energy to tunnel into the inner well and an atom in the
inner well to tunnel back to the outside and thence be repelled to r . Atoms bound in this
inner well are then said to be metastable (which means basically slowly unstable) they are
classically bound for a while but eventually escape to innity.
However, in nature pairs of atoms in the metastable conguration have a chance of giving up
some energy (by, for example, giving up a photon or phonon, where you shouldnt worry too much
about what these are just yet) and make a transistion to a still lower energy state such as that
represented by E
c
< 0.
When the atoms have total energy E
c
as drawn in this gure, they have only two turning points
(labelled c in the gure). The classically permitted domain is now only the values of r in between
these two points; everything less than the inner turning point or outside of the outer turning point
corresponds to a kinetic energy that is less than 0 which is impossible. The classically forbidden
regions for E
c
are again shaded on the diagram. Atoms with this energy oscillate back and forth
between these two turning points.
They oscillate back and forth very much like a mass on a spring! Note that this regions is
labelled the quadratic region on the gure. This means that in this region, a quadratic function
of r r
e
(where r
e
is the stable equilibrium at the minimum of U(r) in this well) is a very good
approximation to the actual potential energy. The potential energy of a mass on a spring aligned
with r and with its equilibrium length moved so that it is r
e
is just
1
2
k(r r
e
)
2
+U
0
, which can be
t to U(r) in the quadratic region with a suitable choice of k and U
0
.
89
The support of a function is the set values of the argument for which the function is not zero, in this case a
nite sphere around the atom out where the potential energy rst becomes attractive.
Homework for Week 3
Problem 1.
Problem 2.
Derive the Work-Kinetic Energy (WKE) theorem in one dimension from Newtons second law. You
may use any approach used in class or given and discussed in this textbook (or any other), but do
it yourself and without looking after studying.
Problem 3.
L
m
k
D?
at rest
A block of mass m slides down a smooth (frictionless) incline of length L that makes an angle
with the horizontal as shown. It then reaches a rough surface with a coecient of kinetic friction
k
.
Use the concepts of work and/or mechanical energy to nd the distance D the block slides across
the rough surface before it comes to rest. You will nd that using the generalized non-conservative
work-mechanical energy theorem is easiest, but you can succeed using work and mechanical energy
conservation for two separate parts of the problem as well.
Problem 4.
d
m
H
A simple childs toy is a jumping frog made up of an approximately massless spring of uncom-
pressed length d and spring constant k that propels a molded plastic frog of mass m. The frog is
pressed down onto a table (compressing the spring by d) and at t = 0 the spring is released so that
the frog leaps high into the air.
Use work and/or mechanical energy to determine how high the frog leaps.
Problem 5.
H
m
2
m
1
A block of mass m
2
sits on a rough table. The coecients of friction between the block and the
table are
s
and
k
for static and kinetic friction respectively. A much larger mass m
1
(easily heavy
enough to overcome static friction) is suspended from a massless, unstretchable, unbreakable rope
that is looped around the two pulleys as shown and attached to the support of the rightmost pulley.
At time t = 0 the system is released at rest.
Use work and/or mechanical energy (where the latter is very easy since the internal work done
by the tension in the string cancels) to nd the speed of both masses after the large mass m
1
has
fallen a distance H. Note that you will still need to use the constraint between the coordinates that
describe the two masses. Remember how hard you had to work to get this answer last week?
When time isnt important, energy is better!
Problem 6.
D
m
x
o
F = F e
x/D
A simple schematic for a paintball gun with a barrel of length D is shown above; when the
trigger is pulled carbon dioxide gas under pressure is released into the approximately frictionless
barrel behind the paintball (which has mass m). As it enters, the expanding gas is cut o by a
special valve so that it exerts a force on the ball of magnitude:
F = F
0
e
x/D
on the ball, pushing it to the right, where x is measured from the paintballs initial position as
shown, until the ball leaves the barrel.
a) Find the work done on the paintball by the force as the paintball is accelerated a total distance
D down the barrel.
b) Use the work-kinetic-energy theorem to compute the kinetic energy of the paintball after it
has been accelerated.
c) Find the speed with which the paintball emerges from the barrel after the trigger is pulled.
Problem 7.
H
v
m
R
R
A block of mass M sits at rest at the top of a frictionless hill of height H leading to a circular
frictionless loop-the-loop of radius R.
a) Find the minimum height H
min
for which the block barely goes around the loop staying on
the track at the top. (Hint: What is the condition on the normal force when it barely stays
in contact with the track? This condition can be thought of as free fall and will help us
understand circular orbits later, so dont forget it.).
Discuss within your recitation group why your answer is a scalar number times R and how
this kind of result is usually a good sign that your answer is probably right.
b) If the block is started at height H
min
, what is the normal force exerted by the track at the
bottom of the loop where it is greatest?
If you have ever ridden roller coasters with loops, use the fact that your apparent weight is
the normal force exerted on you by your seat if you are looping the loop in a roller coaster
and discuss with your recitation group whether or not the results you derive here are in accord
with your experiences. If you havent, consider riding one aware of the forces that are acting
on you and how they aect your perception of weight and change your direction on your next
visit to e.g. Busch Gardens to be, in a bizarre kind of way, a physics assignment. (Now cmon,
how many classes have you ever taken that assign riding roller coasters, even as an optional
activity?:-)
Problem 8.
L
T
m
v
v
min
o
A ball of mass m is attached to a (massless, unstretchable) string and is suspended from a pivot.
It is moving in a vertical circle of radius R such that it has speed v
0
at the bottom as shown. The
ball is in a vacuum; neglect drag forces and friction in this problem. Near-Earth gravity acts down.
a) Find an expression for the tension T at the top of the loop as a function of m, v
0
, g, R,
assuming that it is still moving in a circle when it gets there.
b) From this expression, nd the minimum speed v
min
that the ball must have at the top to barely
loop the loop on the circular trajectory (with a precisely limp string with tension T = 0 at the
top).
c) Determine the speed v
0
the ball must have at the bottom to arrive at the top with this minimum
speed. You may use either work or potential energy for this part of the problem.
Problem 9.
L
T
m
v
v
min
o
A ball of mass m is attached to a massless rod (note well) and is suspended from a frictionless
pivot. It is moving in a vertical circle of radius R such that it has speed v
0
at the bottom as shown.
The ball is in a vacuum; neglect drag forces and friction in this problem. Near-Earth gravity acts
down.
a) Find an expression for the force exerted by the rod at the top of the loop as a function of m,
v
0
, g, R, assuming that it is still moving in a circle when it gets there.
b) Find the minimum speed v
min
that the ball must have at the top to barely loop the loop on
the circular trajectory. Note that this is easy, once you think about how the rod is dierent
from a string!
c) Determine the speed v
0
the ball must have at the bottom to arrive at the top with this minimum
speed. You may use either work or potential energy for this part of the problem.
Problem 10.
H
m
v R
A block of mass M sits at the top of a frictionless hill of height H. It slides down and around a
loop-the-loop of radius R, so that its position on the circle can be identied with the angle with
respect to the vertical as shown
a) Find the magnitude of the normal force as a function of the angle .
b) From this, deduce an expression for the angle
0
at which the block will leave the track if the
block is started at a height H = 2R.
Problem 11.
v
0
0
2v
D
In the gure above we see two cars, one moving at a speed v
0
and an identical car moving at a
speed 2v
0
. The cars are moving at a constant speed, so their motors are pushing them forward with
a force that precisely cancels the drag force exerted by the air. This drag force is quadratic in their
speed:
F
d
= bv
2
(in the opposite direction to their velocity) and we assume that this is the only force acting on the
car in the direction of motion besides that provided by the motor itself, neglecting various other
sources of friction or ineciency.
a) Prove that the engine of the faster car has to be providing eight times as much power to
maintain the higher constant speed than the slower car.
b) Prove that the faster car has to do four times as much work to travel a xed distance D than
the slower car.
Discuss these (very practical) results in your groups. Things you might want to talk over include:
Although cars typically do use more gasoline to drive the same distance at 100 kph ( 62 mph)
than they do at 50 kph, it isnt four times as much, or even twice as much. Why not?
Things to think about include gears, engine eciency, fuel wasted idly, friction, streamlining
(dropping to F
d
= bv Stokes drag).
r
+x
+y
(t)
r sin
r cos (t)
(t)
v
This is a guided exercise in calculus exploring the kinematics of circular motion and the relation
between Cartesian and Plane Polar coordinates. It isnt as intuitive as the derivation given in the
rst two weeks, but it is much simpler and is formally correct.
In the gure above, note that:
r = r cos ((t)) x +r sin ((t)) y
where r is the radius of the circle and (t) is an arbitrary continuous function of time describing
where a particle is on the circle at any given time. This is equivalent to:
x(t) = r cos((t))
y(t) = r sin((t))
(going from (r, ) plane polar coordinates to (x, y) cartesian coordinates and the corresponding:
r =
_
x(t)
2
+y(t)
2
(t) = tan
1
_
y
x
_
You will nd the following two denitions useful:
=
d
dt
=
d
dt
=
d
2
dt
2
The rst you should already be familiar with as the angular velocity, the second is the angular
acceleration. Recall that the tangential speed v
t
= r; similarly the tangential acceleration is
a
t
= r as we shall see below.
Work through the following exercises:
a) Find the velocity of the particle v in cartesian vector coordinates.
b) Form the dot product v r and show that it is zero. This proves that the velocity vector is
perpendicular to the radius vector for any particle moving on a circle!
178 Week 4: Systems of Particles, Momentum and Collisions
c) Show that the total acceleration of the particle a in cartesian vector coordinates can be written
as:
a =
2
r +

v
Since the direction of v is tangent to the circle of motion, we can identify these two terms as the
results:
a
r
=
2
r =
v
2
t
r
(now derived in terms of its cartesian components) and
a
t
= r.
Optional Problems
No optional problems (yet) this week.
Week 4: Systems of Particles,
Momentum and Collisions
Summary
The center of mass of a system of particles is given by:
x
cm
=
i
m
i
x
i
i
m
i
=
1
M
tot
i
m
i
x
i
One can dierentiate this expression once or twice with respect to time to get the two corollary
expressions:
v
cm
=
i
m
i
v
i
i
m
i
=
1
M
tot
i
m
i
v
i
and
a
cm
=
i
m
i
a
i
i
m
i
=
1
M
tot
i
m
i
a
i
All three expressions may be summed up in the useful forms:
M
tot
x
cm
=
i
m
i
x
i
M
tot
v
cm
=
i
m
i
v
i
M
tot
a
cm
=
i
m
i
a
i
The center of mass coordinates are truly weighted averages of the coordinates weighted with
the actual weights of the particles
90
.
The mass density of a solid object in one, two, or three dimensions is traditionally written
in physics as:
= lim
x0
m
x
=
dm
dx
= lim
x0
m
A
=
dm
dA
= lim
x0
m
V
=
dm
dV
In each of these expressions, m is the mass in a small chunk of the material, one of length
x, area A, or volume V . The mass distribution of an object is in general a complicated
90
Near the Earths surface where the weight only depends on the mass, of course. Really they are weighted with
the mass.
179
function of the coordinates
91
. However we will usually work only with very simple mass
distributions that we can easily integrate/sum over in this class. When doing so we are likely
to use these denitions backwards:
dm = dx 1 dimension
dm = dA 2 dimensions
dm = dV 3 dimensions
Use the following ritual incantation (which will be useful to you repeatedly for both semesters
of this course!) when working with mass (or later, charge) density distributions:
The mass of the chunk is the mass per unit (length, area, volume) times
the (length, area, volume) of the chunk!
The Center of Mass of a solid object (continuous mass distribution) is given by:
x
cm
=
_
x dm
_
dm
=
_
x (x) dV
_
(x) dV
=
1
M
tot
_
x (x) dV
This can be evaluated one component at a time, e.g.:
x
cm
=
_
x dm
_
dm
=
_
x (x) dV
_
(x) dV
=
1
M
tot
_
x (x) dV
(and similarly for y
cm
and z
cm
).
It also can be written (componentwise) for mass distributions in one and two dimensions:
x
cm
=
_
x dm
_
dm
=
_
x dx
_
dx
=
1
M
tot
_
x dx
(in one dimension) or
x
cm
=
_
x dm
_
dm
=
_
x dA
_
dA
=
1
M
tot
_
x dA
and
y
cm
=
_
y dm
_
dm
=
_
y dA
_
dA
=
1
M
tot
_
y dA
(in two dimensions).
The Momentum of a particle is dened to be:
p = mv
The momentum of a system of particles is the sum of the momenta of the individual particles:
p
tot
=
i
m
i
v
i
=
m
i
v
cm
= M
tot
v
cm
where the last expression follows from the expression for the velocity of the center of mass
above.
91
Think about how mass is distributed in the human body! Or, for that matter, think about the Universe itself,
which can be thought of at least partially as a great big mass density distribution ( x)...
The Kinetic Energy in Terms of the Momentum of a particle is easily written as:
K =
1
2
mv
2
=
1
2
mv
2
_
m
m
_
=
(mv)
2
2m
=
p
2
2m
or (for a system of particles):
K
tot
=
i
1
2
m
i
v
2
i
=
i
p
2
i
2m
i
These forms are very useful in collision problems where momentum is known and con-
served; they will often save you a step or two in the algebra if you express kinetic energies in
terms of momenta from the beginning.
Newtons Second Law for a single particle can be expressed (and was so expressed, originally,
by Newton) as:
F
tot
=
d p
dt
where

F
tot
is the total force acting on the particle.
For a system of particles one can sum this:
F
tot
=
F
i
=
i
d p
i
dt
=
d
i
p
i
dt
=
d p
tot
dt
In this expression the internal forces directed along the lines between particles of the system
cancel (due to Newtons Third Law) and:
F
tot
=
F
ext
i
=
d p
tot
dt
where the total force in this expression is the sum of only the total external forces acting on
the various particles of the system.
The Law of Conservation of Momentum states (following the previous result) that:
If and only if the total external force acting on a system of particles
vanishes, then the total momentum of that system is a constant vector.
or (in equationspeak):
If and only if

F
tot
= 0 then p
tot
= p
i
= p
f
, a constant vector
where p
i
and p
f
are the initial and nal momenta across some intervening process or time
interval where no external forces acted. Momentum conservation is especially useful in col-
lision problems because the collision force is internal and hence does not change the total
momentum.
The Center of Mass Reference Frame is a convenient frame for solving collision problems.
It is the frame whose origin lies at the center of mass and that moves at the constant velocity
(relative to the lab frame) of the center of mass. That is, it is the frame wherein:
x
i
= x
i
x
cm
= x
i
v
cm
t
and (dierentiating once):
v
i
= v
i
v
cm
In this frame,
p
tot
=
i
m
i
v
i
=
i
m
i
v
i
i
m
i
v
cm
= p
tot
p
tot
= 0
which is why it is so very useful. The total momentum is the constant value 0 in the center of
mass frame of a system of particles with no external forces acting on it!
The Impulse of a collision is dened to be the total momentum transferred during the
collision, where a collision is an event where a very large force is exerted over a very short time
interval t. Recalling that

F = d p/dt, its magnitude is:
I = | p| =
_
t
0
F dt
= |
F
avg
|t
and it usually acts along the line of the collision. Note that this the impulse is directly related
to the average force exerted by a collision that lasts a very short time t:
F
a
vg =
1
t
_
t
0
F(t) dt
An Elastic Collision is by denition a collision in which both the momentum and the total
kinetic energy of the particles is conserved across the collision. That is:
p
i
= p
f
K
i
= K
f
This is actually four independent conservation equations (three components of momentum and
kinetic energy).
In general we will be given six initial values for a three-dimensional collision the three
components of the initial velocity for each particle. Our goal is to nd the six nal values
the three components of the nal velocity of each particle. However, we dont have enough
simultaneous equations to accomplish this and therefore have to be given two more pieces of
information in order to solve a general elastic collision problem in three dimensions.
In two dimensional collisions we are a bit better o we have three conservation equations
(two momenta, one energy) and four unknowns (four components of the nal velocity) and
can solve the collision if we know one more number, say the angle at which one of the particles
emerges or the impact parameter of the collision
92
, but it is still pretty dicult.
In one dimension we have two conservation equations one momentum, one energy, and two
unknowns (the two nal velocities) and we can (almost) uniquely solve for the nal velocities
given the initial ones. In this latter case only, when the initial state of the two particles is
given by m
1
, v
1i
, m
2
, v
2i
then the nal state is given by:
v
1f
= v
1i
+ 2v
cm
v
2f
= v
2i
+ 2v
cm
An Inelastic Collision is by denition not an elastic collision, that is, a collision where
kinetic energy is not conserved. Note well that the term elastic therefore refers to con-
servation of energy which may or may not be present in a collision, but that MOMENTUM
IS ALWAYS CONSERVED IN A COLLISION in the impact approximation, which
we will universally make in this course.
A fully inelastic collision is one where the two particles collide and stick together to move
as one after the collision. In three dimensions we therefore have three conserved quantities (the
components of the momentum) and three unknown quantities (the three components of the
nal velocity and therefore fully inelastic collisions are trivial to solve! The solution is
simply to nd:
P
tot
=

P
i
= m
1
v
1,i
+m
2
v
2,i
and set it equal to

P
f
:
m
1
v
1,i
+m
2
v
2,i
= (m
1
+m
2
)v
f
= (m
1
+m
2
)v
cm
92
Wikipedia: http://www.wikipedia.org/wiki/impact parameter.
or
v
f
= v
cm
=
m
1
v
1,i
+m
2
v
2,i
m
1
+m
2
=
P
tot
M
tot
The nal velocity of the stuck together masses is the (constant) velocity of the center of mass
of the system, which makes complete sense.
Kinetic energy is always lost in an inelastic collision, and one can always evaluate it from:
K = K
f
K
i
=
P
2
tot
2M
tot
_
p
2
1,i
2m
1
+
p
2
2,i
2m
2
_
In a partially inelastic collision, the particles collide but dont quite stick together. One has
three (momentum) conservation equations and needs six nal velocities, so one in general must
be given three pieces of information in order to solve one in three dimensions. Even in one
dimension one has only one equation and two unknowns and need at least one additional piece
of independent information to solve a problem.
The Kinetic Energy of a System of Particles can in general be written as:
K
tot
=
_
i
K
i
_
+K
cm
= K
tot
+K
cm
which one should read as The total kinetic energy of the system is the total kinetic energy in
the (primed) center of mass frame plus the kinetic energy of the center of mass frame.
The latter is just:
K
cm
=
1
2
M
tot
v
2
cm
=
P
2
tot
2M
tot
This theorem will prove very useful to us when we consider rotation, but it also means that
the total kinetic energy of a macroscopic object many of many microscopic parts is the sum of
its macroscopic kinetic energy its kinetic energy where we treat it as a particle located at
its center of mass and its internal microscopic kinetic energy. The latter is essentially related
to heat and temperature. Inelastic collisions that lose kinetic energy of their macroscopic
constituents (e.g. cars) gain it in the increase in temperature of the objects after the collision
that results from the greater microscopic kinetic energy of the particles that make them up in
the center of mass (object) frame.
4.1: Systems of Particles
The world of one particle is fairly simple. Something pushes on the particle, and it accelerates. Stop
pushing, it coasts or remains still. Do work on it and it speeds up. Do negative work on it and it
slows down. Increase or decrease its potential energy; decrease or increase its kinetic energy.
However, the real world is not so simple. For one thing, every push works two ways all forces
act symmetrically between objects no object experiences a force all by itself. For another, real
objects are not particles they are made up of lots of particles themselves. Finally, even if we
ignore the internal constituents of an object, we seem to inhabit a universe with lots of objects.
Somehow we know intuitively that the details of the motion of every electron in a baseball are
irrelevant to the behavior of the baseball as a whole. Clearly, we need to deduce ways of taking a
collection of particles and determining its collective behavior. Ideally, this process should be one
we can iterate, so that we can treat collections of collections a box of baseballs, under the right
circumstances (falling out of an airplane, for example) might also be expected to behave within
reason like a single object independent of the motion of the baseballs inside, or the motion of the
atoms in the baseballs, or the motion of the electrons in the atoms.
Packing (particle of mass m < M)
Atoms in packing
electrons in atom
Baseball ("particle" of mass M)
Figure 45: An object such as a baseball is not really a particle. It is made of many, many particles
even the atoms it is made of are made of many particles each. Yet it behaves like a particle as far
as Newtons Laws are concerned. Now we nd out why.
We will obtain this collective behavior by averaging, or summing over at successively larger
scales, the physics that we know applies at the smallest scale to things that really are particles and
discover to our surprise that it applies equally well to collections of those particles, subject to a few
new denitions and rules.
4.1.1: Newtons Laws for a System of Particles Center of Mass
m
3
x
3
x
2
m
2
x
1
m
1
M
tot
X
cm
F
tot
F
1
F
3
F
2
Figure 46: A system of N = 3 particles is shown above, with various forces

F
i
acting on the masses
(which therefore each their own accelerations a
i
). From this, we construct a weighted average
acceleration of the system, in such a way that Newtons Second Law is satised for the total mass.
Suppose we have a system of N particles, each of which is experiencing a force. Some (part)
of those forces are external they come from outside of the system. Some (part) of them may
be internal equal and opposite force pairs between particles that help hold the system together
(solid) or allow its component parts to interact (liquid or gas).
We would like the total force to act on the total mass of this system as if it were a particle.
That is, we would like for:
F
tot
= M
tot

A (338)
where vA is the acceleration of the system. This is easily accomplished.
Newtons Second Law for a system of particles is written as:
F
tot
=
F
i
=
i
m
i
d
2
x
i
dt
2
(339)
We now perform the following Algebra Magic:
F
tot
=
F
i
(340)
=
i
m
i
d
2
x
i
dt
2
(341)
=
_
i
m
i
_
d
2

X
dt
2
(342)
= M
tot
d
2

X
dt
2
= M
tot

A (343)
Note well the introduction of a new coordinate,

X. This introduction isnt algebra, it is a
denition. Lets isolate it so that we can see it better:
i
m
i
d
2
x
i
dt
2
= M
tot
d
2

X
dt
2
(344)
Basically, if we dene an

X such that this relation is true then Newtons second law is recovered
for the entire system of particles located at

X as if that location were indeed a particle of mass
M
tot
itself.
We can rearrange this a bit as:
d
V
dt
=
d
2

X
dt
2
=
1
M
tot
i
m
i
d
2
x
i
dt
2
=
1
M
tot
i
m
i
dv
i
dt
(345)
and can integrate twice on both sides (as usual, but we only do the integrals formally). The rst
integral is:
d
X
dt
=

V =
1
M
tot
i
m
i
v
i
+

V
0
=
1
M
tot
i
m
i
dx
i
dt
+

V
0
(346)
and the second is:
X =
1
M
tot
i
m
i
x
i
+

V
0
t +

X
0
(347)
Note that this equation is exact, but we have had to introduce two constants of integration that are
completely arbitrary:

V
0
and

X
0
.
These constants represent the exact same freedom that we have with our inertial frame of ref-
erence we can put the origin of coordinates anywhere we like, and we will get the same equations
of motion even if we put it somewhere and describe everything in a uniformly moving frame. We
should have expected this sort of freedom in our denition of a coordinate that describes the sys-
tem because we have precisely the same freedom in our choice of coordinate system in terms of
which to describe it.
In many problems, however, we dont want to use this freedom. Rather, we want the simplest
description of the system itself, and push all of the freedom concerning constants of motion over
to the coordinate choice itself (where it arguably belongs). We therefore select just one (the
simplest one) of the innity of possibly consistent rules represented in our denition above that
would preserve Newtons Second Law and call it by a special name: The Center of Mass!
We dene the position of the center of mass to be:
M

X
cm
=
i
m
i
x
i
(348)
(with M =
i
m
i
). If we consider the location of the system of particles to be the center of mass,
then Newtons Second Law will be satised for the system as if it were a particle, and the location
in question will be exactly what we intuitively expect: the middle of the (collective) object or
system, weighted by its distribution of mass.
Not all systems we treat will appear to be made up of point particles. Most solid objects or
uids appear to be made up of a continuum of mass, a mass distribution. In this case we need to
do the sum by means of integration, and our denition becomes:
M

X
cm
=
_
xdm (349)
(with M =
_
dm). The latter form comes from treating every little dierential chunk of a solid
object like a particle, and adding them all up. Integration, recall, is just a way of adding them
up.
Of course this leaves us with the recursive problem of the fact that solid objects are really
made out of lots of point-like elementary particles and their elds. It is worth very briey presenting
the standard coarse-graining argument that permits us to treat solids and uids like a continuum
of smoothly distributed mass and the limitations of that argument.
4.1.2: Coarse Graining: Continuous Mass Distributions
Suppose we wish to nd the center of mass of a small cube of some uniform material such as gold,
why not? We know that really gold is made up of gold atoms, and that gold atoms are make up of
(elementary) electrons, quarks, and various massless eld particles that bind the massive particles
together. In a cube of gold with a mass of 197 grams, there are roughly 6 10
23
atoms, each with
79 electrons and 591 quarks for a total of 670 elementary particles per atom. This is then about
4 10
26
elementary particles in a cube just over 2 cm per side.
If we tried to actually use the sum form of the denition of center of mass to evaluate its location,
and ran the computation on a computer capable of performing one trillion oating point operations
per second, it would take several hundred trillion seconds (say ten million years) and unless we
knew the exacly location of every quark would still be approximate, no better than a guess.
We do far better by averaging. Suppose we take a small chunk of the cube of gold one with cube
edges 1 millimeter long, for example. This still has an enormous number of elementary particles in it
so many that if we shift the boundaries of the chunk a tiny bit many particles many whole atoms
are moved in or out of the chunk. Clearly we are justied in talking about the average number of
atoms or average amount of mass of gold in a tiny cube like this.
A millimeter is still absurdly large on an atomic scale. We could make the cube 1 micron (110
6
meter, a thousandth of a millimeter) and because atoms have a generic size around one Angstrom
1 10
10
meters we would expect it to contain around (10
6
/10
10
)
3
= 10
12
atoms. Roughly
a trillion atoms in a cube too small to see with the naked eye (and each atom still has almost 700
elementary particles, recall). We could go down at least 1-2 more orders of magnitude in size and
still have millions of particles in our chunk!
A chunk 10 nanometers to the side is fairly accurately located in space on a scale of meters. It
has enough elementary particles in it that we can meaningfully speak of its average mass and use
this to dene the mass density at the point of location of the chunk the mass per unit volume
at that point in space with at least 5 or 6 signicant gures (one part in a million accuracy). In
most real-number computations we might undertake in the kind of physics learned in this class, we
wouldnt pay attention to more than 3 or 4 signicant gures, so this is plenty.
The point is that this chunk is now small enough to be considered dierentially small for the
purposes of doing calculus. This is called coarse graining treating chunks big on an atomic or
molecular scale but small on a macroscopic scale. To complete the argument, in physics we would
generally consider a small chunk of matter in a solid or uid that we wish to treat as a smooth
distribution of mass, and write at rst:
m = V (350)
while reciting the following magical formula to ourselves:
The mass of the chunk is the mass per unit volume times the volume of the
chunk.
We would then think to ourselves: Gee, is almost a uniform function of location for chunks that
are small enough to be considered a dierential as far as doing sums using integrals are concerned.
Ill just coarse grain this and use integration to evaluation all sums. Thus:
dm = dV (351)
We do this all of the time, in this course. This semester we do it repeatedly for mass distributions,
and sometimes (e.g. when treating planets) will coarse grain on a much larger scale to form the
average density on a planetary scale. On a planetary scale, barring chunks of neutronium or the
occasional black hole, a cubic kilometer chunk is still small enough to be considered dierentially
small we usually wont need to integrate over every single distinct pebble or clod of dirt on a much
smaller scale. Next semester we will do it repeatedly for electrical charge, as after all all of those gold
atoms are made up of charged particles so there are just as many charges to consider as there are
elementary particles. Our models for electrostatic elds of continuous charge and electrical currents
in wires will all rely on this sort of coarse graining.
Before we move on, we should say a word or two about two other common distributions of mass.
If we want to nd e.g. the center of mass of a at piece of paper cut out into (say) the shape of a
triangle, we could treat it as a volume of paper and integrate over its thickness. However, it is
probably a pretty good bet from symmetry that unless the paper is very inhomogeneous across its
thickness, the center of mass in the at plane is in the middle of the slab of paper, and the paper
is already so thin that we dont pay much attention to its thickness as a general rule. In this case
we basically integrate out the thickness in our minds (by multiplying by the paper thickness t)
and get:
m = V = tA = A (352)
where = t is the (average) mass per unit area of a chunk of paper with area A. We say our
(slightly modied) magic ritual and poof! We have:
dm = dA (353)
for two dimensional areal distributions of mass.
Similarly, we often will want to nd the center of mass of things like wires bent into curves,
things that are long and thin. By now I shouldnt have to explain the following reasoning:
m = V = Ax = x (354)
where A is the (small!) cross section of the solid wire and = A is the mass per unit length of the
chunk of wire, magic spell, cloud of smoke, and when the smoke clears we are left with:
dm = dx (355)
In all of these cases, note well, , , can be functions of the coordinates! They are not
necessarily constant, they simply describe the (average) mass per unit volume at the point in our
object or system in question, subject to the coarse-graining limits. Those limits are pretty sensible
ones if we are trying to solve problems on a length scale of angstroms, we cannot use these
averages because the laws of large numbers wont apply. Or rather, we can and do still use these
kinds of averages in quantum theory (because even on the scale of a single atom doing all of the
discrete computations proves to be a problem) but then we do so knowing up front that they are
approximations and that our answer will be wrong.
In order to use the idea of center of mass (CM) in a problem, we need to be able to evaluate it.
For a system of discrete particles, the sum denition is all that there is you brute-force your way
through the sum (decomposing vectors into suitable coordinates and adding them up).
For a solid object that is symmetric, the CM is in the middle. But wheres that? To precisely
nd out, we have to be able to use the integral denition of the CM:
M

X
cm
=
_
xdm (356)
(with M =
_
dm, and dm = dV or dm = dA or dm = dl as discussed above).
Lets try a few examples:
Example 4.1.1: Center of Mass of a Continuous Rod
dx 0 L
dm = dx =
M
L
___
dx
Figure 47:
Let us evaluate the center of mass of a continuous rod of length L and total mass M, to make
sure it is in the middle:
M

X
cm
=
_
xdm =
_
L
0
xdx (357)
where
M =
_
dm =
_
L
0
dx = L (358)
(which denes , if you like) so that
M

X
cm
=
L
2
2
= M
L
2
(359)
and
X
cm
=
L
2
. (360)
Gee, that was easy. Lets try a hard one.
0
d dA =r dr
d r
0
R
dr
dm = dA
r
Figure 48:
Example 4.1.2: Center of mass of a circular wedge
Lets nd the center of mass of a circular wedge (a shape like a piece of pie, but very at). It is two
dimensional, so we have to do it one coordinate at a time. We start from the same place:
MX
cm
=
_
xdm =
_
R
0
_

0
0
xdA =
_
R
0
_

0
0
r
2
cos drd (361)
where
M =
_
dm =
_
R
0
_

0
0
dA =
_
R
0
_

0
0
rdrd =
R
2
0
2
(362)
(which denes , if you like) so that
MX
cm
=
R
3
sin
0
3
(363)
from which we nd (with a bit more work than last time but not much) that:
X
cm
=
2R
3
sin
0
3R
2
. (364)
Amazingly enough, this has units of R (length), so it might just be right. To check it, do Y
cm
on your own!
Example 4.1.3: Breakup of Projectile in Midight
m
m = m + m
R
x
2
x
1
1
m
2
1 2
v
0
Figure 49: A projectile breaks up in midight. The center of mass follows the original trajectory of
the particle, allowing us to predict where one part lands if we know where the other one lands, as
long as the explosion exerts no vertical component of force on the two particles.
Suppose that a projectile breaks up horizontally into two pieces of mass m
1
and m
2
in midight.
Given , v
0
, and x
1
, predict x
2
.
The idea is: The trajectory of the center of mass obeys Newtons Laws for the entire projectile
and lands in the same place that it would have, because no external forces other than gravity act.
The projectile breaks up horizontally, which means that both pieces will land at the same time, with
the center of mass in between them. We thus need to nd the point where the center of mass would
have landed, and solve the equation for the center of mass in terms of the two places the projectile
fragments land for one, given the other. Thus:
Find R. As usual:
y = (v
0
sin )t
1
2
gt
2
(365)
t
R
(v
0
sin
1
2
gt
R
) = 0 (366)
t
R
=
2v
0
sin )
g
(367)
R = (v
0
cos )t
R
=
2v
2
0
sin cos
g
. (368)
R is the position of the center of mass. We write the equation making it so:
m
1
x
1
+m
2
x
2
= (m
1
+m
2
)R (369)
and solve for the unknown x
2
.
x
2
=
(m
1
+m
2
)R m
1
x
1
m
2
(370)
From this example, we see that it is sometimes easiest to solve a problem by separating the motion
of the center of mass of a system from the motion in a reference frame that rides along with the
center of mass. The price we may have to pay for this convenience is the appearance of pseudoforces
in this frame if it happens to be accelerating, but in many cases it will not be accelerating, or the
acceleration will be so small that the pseudoforces can be neglected compared to the much larger
forces of interest acting within the frame. We call this (at least approximately) inertial reference
frame the Center of Mass Frame and will discuss and dene it in a few more pages.
First, however, we need to dene an extremely useful concept in physics, that of momentum,
and discuss the closely related concept of impulse and the impulse approximation that permits
us to treat the center of mass frame as being approximately inertial in many problems even when it
is accelerating.
4.2: Momentum
Momentum is a useful idea that follows naturally from our decision to treat collections as objects.
It is a way of combining the mass (which is a characteristic of the object) with the velocity of the
object. We dene the momentum to be:
p = mv (371)
Thus (since the mass of an object is generally constant):
F = ma = m
dv
dt
=
d
dt
(mv) =
d p
dt
(372)
is another way of writing Newtons second law. In fact, this is the way Newton actually wrote
Newtons second law he did not say
F = ma the way we have been reciting. We emphasize this

connection because it makes the path to solving for the trajectories of constant mass particles a bit
easier, not because things really make more sense that way.
Note that there exist systems (like rocket ships, cars, etc.) where the mass is not constant. As
the rocket rises, its thrust (the force exerted by its exhaust) can be constant, but it continually gets
lighter as it burns fuel. Newtons second law (expressed as

F = ma) does tell us what to do in
this case but only if we treat each little bit of burned and exhausted gas as a particle, which is
a pain. On the other hand, Newtons second law expressed as

F =
d p
dt
still works ne and makes
perfect sense it simultaneously describes the loss of mass and the increase of velocity as a function
of the mass correctly.
Clearly we can repeat our previous argument for the sum of the momenta of a collection of
particles:
P
tot
=
i
p
i
=
i
mv
i
(373)
so that
d
P
tot
dt
=
i
d p
i
dt
=
F
i
=

F
tot
(374)
Dierentiating our expression for the position of the center of mass above, we also get:
d
i
m
i
x
i
dt
=
i
m
i
dx
i
dt
=
i
p
i
=

P
tot
= M
tot
v
cm
(375)
4.2.1: The Law of Conservation of Momentum
We are now in a position to state and trivially prove the Law of Conservation of Momentum.
It reads
93
:
If and only if the total external force acting on a system is zero, then the total
momentum of a system (of particles) is a constant vector.
You are welcome to learn this in its more succinct algebraic form:
If and only if

F
tot
= 0 then

P
tot
=

P
initial
=

P
nal
= a constant vector. (376)
Please learn this law exactly as it is written here. The condition

F
tot
= 0 is essential otherwise,
as you can see,

F
tot
=
d
P
tot
dt
!
93
The if and only if bit, recall, means that if the total momentum of a system is a constant vector, it also implies
that the total force acting on it is zero, there is no other way that this condition can come about.
The proof is almost a one-liner at this point:
F
tot
=
F
i
= 0 (377)
implies
d
P
tot
dt
= 0 (378)
so that

P
tot
is a constant if the forces all sum to zero. This is not quite enough. We need to note
that for the internal forces (between the ith and jth particles in the system, for example) from
Newtons third law we get:
F
ij
=
F
ji
(379)
so that
F
ij
+

F
ji
= 0 (380)
pairwise, between every pair of particles in the system. That is, although internal forces may not
be zero (and generally are not, in fact) the changes the cause in the momentum of the system cancel.
We can thus subtract:
F
internal
=
i,j
F
ij
= 0 (381)
from

F
tot
=

F
external
+

F
internal
to get:
F
external
=
d
P
tot
dt
= 0 (382)
and the total momentum must be a constant (vector).
This can be thought of as the bootstrap law You cannot lift yourself up by your own boot-
straps! No matter what force one part of you exerts on another, those internal forces can never alter
the velocity of your center of mass or (equivalently) your total momentum, nor can they overcome
or even alter any net external force (such as gravity) to lift you up.
As we shall see, the idea of momentum and its conservation greatly simplify doing a wide range
of problems, just like energy and its conservation did in the last chapter. It is especially useful in
understanding what happens when one object collides with another object.
Evaluating the dynamics and kinetics of microscopic collisions (between, e.g. electrons, protons,
neutrons and targets such as atoms or nuclei) is a big part of contemporary physics so big that
we call it by a special name: Scattering Theory
94
. The idea is to take some initial (presumed
known) state of an about-to-collide system, to let it collide, and to either infer from the observed
scattering something about the nature of the force that acted during the collision, or to predict,
from the measured nal state of some of the particles, the nal state of the rest.
Sound confusing? Its not, really, but it can be complicated because there are lots of things
that might make up an initial and nal state. In this class we have humbler goals we will be
content simply understanding what happens when macroscopic objects like cars or billiard
95
balls
collide, where (as we will see) momentum conservation plays an enormous role. This is still the rst
94
Wikipedia: http://www.wikipedia.org/wiki/Scattering Theory. This link is mostly for more advanced students,
e.g. physics majors, but future radiologists might want to look it over as well as it is the basis for a whole lot of
radiology...
95
Wikipedia: http://www.wikipedia.org/wiki/Billiards. It is always dangerous to assume the every student has had
any given experience or knows the same games or was raised in the same culture as the author/teacher, especially
nowadays when a signicant fraction of my students, at least, come from other countries and cultures, and when this
book is in use by students all over the world outside of my own classroom, so I provide this (and various other) links.
In this case, as you will see, billiards or pool is a game played on a table where the players try to knock balls in
holes by poking one ball (the cue ball) with a stick to drive another identically sized ball into a hole. Since the
balls are very hard and perfectly spherical, the game is an excellent model for two-dimensional elastic collisions.
step (for physics majors or future radiologists) in understanding more advanced scattering theory
but it provides a lot of direct insight into everyday experience and things like car safety and why
a straight on shot in pool often stops one ball cold while the other continues on with the original
balls velocity.
In order to be able to use momentum conservation in a collision, however, no external force can
act on the colliding objects during the collision. This is almost never going to precisely be the case,
so we will have to idealize by assuming that a collision (as opposed to a more general and leisurely
force interaction) involves forces that are zero right up to where the collision starts, spike up to very
large values (generally much larger than the sum of the other forces acting on the system at the
time) and then drop quickly back to zero, being non-zero only in a very short time interval t.
In this idealization, collisions will (by assumption) take place so fast that any other external
forces cannot signicantly alter the momentum of the participants during the time t. This is
called the impulse approximation. With the impulse approximation, we can neglect all other
external forces (if any are present) and use momentum conservation as a key principle while
analyzing or solving collisions. All collision problems solved in this course should be solved using
the impulse approximation. Lets see just what impulse is, and how it can be used to help solve
collision problems and understand things like the forces exerted on an object by a uid that is in
contact with it.
4.3: Impulse
Let us imagine a typical collision: one pool ball approaches and strikes another, causing both balls
to recoil from the collision in some (probably dierent) directions and at dierent speeds. Before
they collide, they are widely separated and exert no force on one another. As the surfaces of the two
(hard) balls come into contact, they suddenly exert relatively large, relatively violent, equal and
opposite forces on each other over a relatively short time, and then the force between the objects
once again drops to zero as they either bounce apart or stick together and move with a common
velocity. Relatively here in all cases means compared to all other forces acting on the
system during the collision in the event that those forces are not actually zero.
For example, when skidding cars collide, the collision occurs so fast that even though kinetic
friction is acting, it makes an ignorable change in the momentum of the cars during the collision
compared to the total change of momentum of each car due to the collision force. When pool balls
collide we can similarly ignore the drag force of the air or frictional force exerted by the tables
felt lining for the tiny time they are in actual contact. When a bullet embeds itself in a block, it
does so so rapidly that we can ignore the friction of the table on which the block sits. Idealizing
and ignoring e.g. friction, gravity, drag forces in situations such as this is known as the impulse
approximation, and it greatly simplies the treatment of collisions.
Note that we will frequently not know the detailed functional form of the collision force,

F
coll
(t)
nor the precise amount of time t in any of these cases. The crumpling of cars as they collide is
a very complicated process and exerts a completely unique force any time such a collision occurs
no two car collisions are exactly alike. Pool balls probably do exert a much more reproducible and
understandable force on one another, one that we we could model if we were advanced physicists or
engineers working for a company that made billiard tables and balls and our livelihoods depended
on it but were not and it doesnt. Bullets embedding themselves in blocks again do so with a force
that is dierent every time that we can never precisely measure, predict, or replicate.
In all cases, although the details of the interaction force are unknown (or even unknowable in any
meaningful way), we can obtain or estimate or measure some approximate things about the forces
in any given collision situation. In particular we can put reasonable limits on t and make before
and after measurements that permit us to compute the average force exerted over this time.
Let us begin, then, by dening the average force over the (short) time t of any given collision,
assuming that we did know

F =

F
21
(t), the force one object (say m
1
) exerts on the other object
(m
2
). The magnitude of such a force (one perhaps appropriate to the collision of pool balls) is
sketched below in gure 50 where for simplicity we assume that the force acts only along the line of
contact and is hence eectively one dimensional in this direction
96
.
t
(t)
F
avg
F
Area is
t
p = I (impulse)
Figure 50: A typical collision force that might be exerted by the cue ball on the eight ball in a
game of pool, approximately along the line connecting the two ball centers. In this case we would
expect a fairly symmetric force as the two balls briey deform at the point of contact. The time of
contact t has been measured to be on the order of a tenth of a millisecond for colliding pool balls.
The time average of this force is computed the same way the time average of any other time-
dependent quantity might be:
F
avg
=
1
t
_
t
0
F(t) dt (383)
We can evaluate the integral using Newtons Second Law expressed in terms of momentum:
F(t) =
d p
dt
(384)
so that (multiplying out by dt and integrating):
p
2f
p
2i
= p
2
=
_
t
0
F(t) dt (385)
This is the total vector momentum change of the second object during the collision and is also
the area underneath the

F(t) curve (for each component of a general force in the gure above
we assume that the force only points along one direction over the entire collision and the change
in the momentum component in this direction is then the area under the drawn curve). Note
that the momentum change of the rst ball is equal and opposite. From Newtons Third Law,
F
12
(t) =
F
21
(t) =

F and:
p
1f
p
1i
= p
1
=
_
t
0
F(t) dt = p
2
(386)
The integral of a force

F over an interval of time is called the impulse
97
imparted by the force
I =
_
t
2
t
1
F(t) dt =
_
t
2
t
1
d p
dt
dt =
_
p
2
p
1
d p = p
2
p1 = p (387)
96
This is, as anyone who plays pool knows from experience, an excellent assumption and is in fact how one most
generally aims the targeted ball (neglecting all of the various fancy tricks that can alter this assumption and the
outcome).
97
Wikipedia: http://www.wikipedia.org/wiki/Impulse (physics).
This proves that the (vector) impulse is equal to the (vector) change in momentum over the same
time interval, a result known as the impulse-momentum theorem. From our point of view, the
impulse is just the momentum transferred between two objects in a collision in such a way that the
total momentum of the two is unchanged.
Returning to the average force, we see that the average force in terms of the impulse is just:
F
avg
=
I
t
=
p
t
=
p
f
p
i
t
(388)
If you refer again to gure 50 you can see that the area under F
avg
is equal the area under the actual
force curve. This makes the average force relatively simple to compute or estimate any time you
know the change in momentum produced by a collision and have a way of measuring or assigning
an eective or average time t per collision.
Example 4.3.1: Average Force Driving a Golf Ball
A golf ball leaves a 1 wood at a speed of (say) 70 meters/second (this is a reasonable number the
world record as of this writing is 90 meters/second). It has a mass of 45 grams. The time of contact
has been measured to be t = 0.0005 seconds (very similar to a collision between pool balls). What
is the magnitude of the average force that acts on the golf ball during this collision?
This one is easy:
F
avg
=
I
t
=
mv
f
m(0)
t
=
3.15
0.0005
= 6300 Newtons (389)
Since I personally have a mass conveniently (if embarrassingly) near 100 kg and therefore weigh 1000
Newtons, the golf club exerts an average force of 6.3 times my weight, call it 3/4 of a ton. The peak
force, assuming an impact shape for F(t) not unlike that pictured above is as much as two English
tons (call it 17400 Newtons).
Note Well! Impulse is related to a whole spectrum of conceptual mistakes students often make!
Heres an example that many students would get wrong before they take mechanics and that no
student should ever get wrong after they take mechanics! But many do. Try not to be one
of them...
Example 4.3.2: Force, Impulse and Momentum for Windshield and Bug
Theres a song by Mary Chapin Carpenter called The Bug with the refrain:
Sometimes youre the windshield,
Sometimes youre the bug...
In a collision between (say) the windshield of a large, heavily laden pickup truck and a teensy
little yellowjacket wasp, answer the following qualitative/conceptual questions:
a) Which exerts a larger (magnitude) force on the other during the collision?
b) Which changes the magnitude of its momentum more during the collision?
c) Which changes the magnitude of its velocity more during the collision?
Think about it for a moment, answer all three in your mind. Now, compare it to the correct
answers below
98
. If you did not get all three perfectly correct then go over this whole chapter until
you do you may want to discuss this with your favorite instructor as well.
4.3.1: The Impulse Approximation
When we analyze actual collisions in the real world, it will almost never be the case that there
are no external forces acting on the two colliding objects during the collision process. If we hit a
baseball with a bat, if two cars collide, if we slide two air-cushioned disks along a tabletop so that
they bounce o of each other, gravity, friction, drag forces are often present. Yet we will, in this
textbook, uniformly assume that these forces are irrelevant during the collision.
t
(t) F
t
p (collision)
p (background forces)
c
b
Figure 51: Impulse forces for a collision where typical external forces such as gravity or friction or
drag forces are also present.
Lets see why (and when!) we can get away with this. Figure 51 shows a typical collision force (as
before) for a collision, but this time shows some external force acting on the mass at the same time.
This force might be varying friction and drag forces as a car brakes to try to avoid a collision on a
bumpy road, for example. Those forces may be large, but in general they are very small compared to
the peak, or average, collision force between two cars. To put it in perpective, in the example above
we estimated that the average force between a golf ball and a golf club is over 6000 newtons during
the collision around six times my (substantial) weight. In contrast, the golf ball itself weighs much
less than a newton, and the drag force and friction force between the golf ball and the tee are a tiny
fraction of that.
If anything, the background forces in this gure are highly exaggerated for a typical collision,
compared to the scale of the actual collision force!
The change in momentum resulting from the background force is the area underneath its curve,
just as the change in momentum resulting from the collision force alone is the area under the collision
force curve.
Over macroscopic time over seconds, for example gravity and drag forces and friction can
make a signicant contribution to the change in momentum of an object. A braking car slows down.
A golf ball soars through the air in a gravitational trajectory modied by drag forces. But during
98
Put here so you cant see them while you are thinking so easily. The force exerted by the truck on the wasp
is exactly the same as the force exerted by the wasp on the truck (Newtons Third Law!). The magnitude of
the momentum (or impulse) transferred from the wasp to the truck is exactly the same as the magnitude of the
momentum transferred from the truck to the wasp. However, the velocity of the truck does not measurably change
(for the probable impulse transferred from any normal non-Mothra-scale wasp) while the wasp (as we will see below)
bounces o going roughly twice the speed of the truck...
the collision time t they are negligible, in the specic sense that:
p = p
c
+ p
b
p
c
(390)
(for just one mass) over that time only. Since the collision force is an internal force between the two
colliding objects, it cancels for the system making the momentum change of the system during the
collision approximately zero.
We call this approximation p p
c
(neglecting the change of momentum resulting from
background external forces during the collision) the impulse approximation and we will always
assume that it is valid in the problems we solve in this course. It justies treating the center of mass
reference frame (discussed in the next section) as an inertial reference frame even when technically
it is not for the purpose of analyzing a collision or explosion.
It is, however, useful to have an understanding of when this approximation might fail. In a
nutshell, it will fail for collisions that take place over a long enough time t that the external forces
produce a change of momentum that is not negligibly small compared to the momentum exchange
between the colliding particles, so that the total momentum before the collision is not approximately
equal to the total momentum after the collision.
This can happen because the external forces are unusually large (comparable to the collision
force), or because the collision force is unusually small (comparable to the external force), or because
the collision force acts over a long time t so that the external forces have time to build up a
signicant p for the system. None of these circumstances are typical, however, although we can
imagine setting up an problem where it is true a collision between two masses sliding on a rough
table during the collision where the collision force is caused by a weak spring (a variant of a homework
problem, in other words). We will consider this sort of problem (which is considerably more dicult
to solve) to be beyond the scope of this course, although it is not beyond the scope of what the
concepts of this course would permit you to set up and solve if your life or job depended on it.
4.3.2: Impulse, Fluids, and Pressure
Another valuable use of impulse is when we have many objects colliding with something so many
that even though each collision takes only a short time t, there are so many collisions that they
exert a nearly continuous force on the object. This is critical to understanding the notion of pressure
exerted by a uid, because microscopically the uid is just a lot of very small particles that are
constantly colliding with a surface and thereby transferring momentum to it, so many that they
exert a nearly continuous and smooth force on it that is the average force exerted per particle times
the number of particles that collide. In this case t is conveniently considered to be the inverse of
the rate (number per second) with which the uid particles collide with a section of the surface.
To give you a very crude idea of how this works, lets review a small piece of the kinetic theory
of gases. Suppose you have a cube with sides of length L containing N molecules of a gas. Well
imagine that all of the molecules have a mass m and an average speed in the x direction of v
x
, with
(on average) one half going left and one half going right at any given time.
In order to be in equilibrium (so v
x
doesnt change) the change in momentum of any molecule
that hits, say, the right hand wall perpendicular to x is p
x
= 2mv
x
. This is the impulse transmitted
to the wall per molecular collision. To nd the total impulse in the time t, one must multiply this
by one half the number of molecules in in a volume L
2
v
x
t. That is,
p
tot
=
1
2
_
N
L
3
_
L
2
v
x
t (2mv
x
) (391)
Lets call the volume of the box L
3
= V and the area of the wall receiving the impulse L
2
= A. We
combine the pieces to get:
P =
F
avg
A
=
p
tot
A t
=
_
N
V
__
1
2
mv
2
x
_
=
_
N
V
_
K
x,avg
(392)
where the average force per unit area applied to the wall is the pressure, which has SI units of
Newtons/meter
2
or Pascals.
If we add a result called the equipartition theorem
99
:
K
x,avg
=
1
2
mv
2
x
=
1
2
k
b
T
2
(393)
where k
b
is Boltzmanns constant and T is the temperature in degrees absolute, one gets:
PV = NkT (394)
which is the Ideal Gas Law
100
.
This all rather amazing and useful, and is generally covered and/or derived in a thermodynamics
course, but is a bit beyond our scope for this semester. Its an excellent use of impulse, though, and
the homework problem involving bouncing of a stream of beads o of the pan of a scale is intended
to be practice for doing it then, or at least reinforcing the understanding of how pressure arises
for later on in this course when we treat uids.
In the meantime, the impulse approximation reduces a potentially complicated force of interaction
during a collision to its most basic parameters the change in momentum it causes and the (short)
time over which it occurs. Life is simple, life is good. Momentum conservation (as an equation or
set of equations) will yield one or more relations between the various momentum components of
the initial and nal state in a collision, and with luck and enough additional data in the problem
description will enable us to solve them simultaneously for one or more unknowns. Lets see how
this works.
99
Wikipedia: http://www.wikipedia.org/wiki/Equipartition Theorem.
100
Wikipedia: http://www.wikipedia.org/wiki/Ideal Gas Law. The physicist version of it anyway. Chemists have the
pesky habit of converting the number of molecules into the number of moles using Avogadros number N = 6 10
23
and expressing it as PV = nRT instead, where R = k
b
N
A
. then using truly horrendous units such as liter-atmospheres
in
4.4: Center of Mass Reference Frame
x
1
x
2
v
1
v
2
x
cm
x
1
x
2
v
cm
m
1
m
2
CM frame
lab frame
Figure 52: The coordinates of the center of mass reference frame, a very useful inertial reference
frame for solving collisions and understanding rigid rotation.
In the lab frame the frame in which we actually live we are often in some sense out of
the picture as we try to solve physics problems, trying to make sense of the motion of ies buzzing
around in a moving car as it zips by us. In the Center of Mass Reference Frame we are literally
in the middle of the action, watching the ies in the frame of the moving car, or standing a ground
zero for an impending collision. This makes it a very convenient frame for analyzing collisions,
rigid rotations around an axis through the center of mass (which well study next week), static
equilibrium (in a couple more weeks). At the end of this week, we will also derive a crucial result
connecting the kinetic energy of a system of particles in the lab to the kinetic energy of the same
system evaluated in the center of mass frame that will help us understand how work or mechanical
energy can be transformed without loss into enthalpy (the heating of an object) during a collision
or to rotational kinetic energy as an object rolls!
Recall from Week 2 the Galilean transformation between two inertial references frames where
the primed one is moving at constant velocity v
frame
compared to the unprimed (lab) reference frame,
equation 197.
x
i
= x
i
v
frame
t (395)
We choose our lab frame so that at time t = 0 the origins of the two frames are the same for
simplicity. Then we take the time derivative of this equation, which connects the velocity in the lab
frame to the velocity in the moving frame:
v
i
= v
i
v
frame
(396)
I always nd it handy to have a simple conceptual metaphor for this last equation: The velocity
of ies observed within a moving car equals the velocity of the ies as seen by an observer on the
ground minus the velocity of the car, or equivalently the velocity seen on the ground is the velocity
of the car plus the velocity of the ies measured relative to the car. That helps me get the sign in
the transformation correct without having to draw pictures or do actual algebra.
Lets dene the Center of Mass Frame to be the particular frame whose origin is at the center
of mass of a collection of particles that have no external force acting on them, so that the total
momentum of the system is constant and the velocity of the center of mass of the system is also
constant:
P
tot
= M
tot
v
cm
= a constant vector (397)
or (dividing by M
tot
and using the denition of the velocity of the center of mass):
v
cm
=
1
M
tot
i
m
i
v
i
= a constant vector. (398)
Then the following two equations dene the Galilean transformation of position and velocity
coordinates from the (unprimed) lab frame into the (primed) center of mass frame:
x
i
= x
i
x
cm
= x
i
v
cm
t (399)
v
i
= v
i
v
cm
(400)
An enormously useful property of the center of mass reference frame follows from adding up the
total momentum in the center of mass frame:
tot
=
i
m
i
v
i
=
i
m
i
(v
i
v
cm
)
= (
i
m
i
v
i
) (
i
m
i
)v
cm
= M
tot
v
cm
M
tot
v
cm
= 0 (!) (401)
The total momentum in the center of mass frame is identically zero! In retrospect, this is obvious.
The center of mass is at the origin, at rest, in the center of mass frame by denition, so its velocity
v
cm
is zero, and therefore it should come as no surprise that

P
tot
= M
tot
v
cm
= 0.
As noted above, the center of mass frame will be very useful to us both conceptually and com-
putationally. Our rst application of the concept will be in analyzing collisions. Lets get started!
4.5: Collisions
A collision in physics occurs when two bodies that are more or less not interacting (because they
are too far apart to interact) come in range of their mutual interaction force, strongly interact for
a short time, and then separate so that they are once again too far apart to interact. We usually
think of this in terms of before and after states of the system a collision takes a pair of particles
from having some known initial free state right before the interaction occurs to an unknown nal
free state right after the interaction occurs. A good mental model for the interaction force (as a
function of time) during the collision is the impulse force sketched above that is zero at all times
but the short time t that the two particles are in range and strongly interacting.
There are three general types of collision:
Elastic
Fully Inelastic
Partially Inelastic
In this section, we will rst indicate a single universal assumption we will make when solving
scattering problems using kinematics (conservation laws) as opposed to dynamics (solving the actual
equations of motion for the interaction through the collision). Next, we will briey dene each type
of collision listed above. Finally, in the following sections well spend some time studying each type
in some detail and deriving solutions where it is not too dicult.
4.5.1: Momentum Conservation in the Impulse Approximation
All collisions that occur rapidly enough to be treated in the impulse approximation conserve mo-
mentum even if the particles are not exactly free before and after (because they are moving in a
gravitational eld, experiencing drag, etc). The validity of the impulse approximation will be our
default assumption in the collisions we treat in this course, and hence we will assume that all col-
lisions conserve total momentum through the collision. That is, the total vector momentum of
the colliding particles right before the collision will equal the total vector momentum of the colliding
particles right after the collision.
Because momentum is a three-dimensional vector, this yields one to three (relevant) independent
equations that constrain the solution, depending on the number of dimensions in which the collision
occurs.
4.5.2: Elastic Collisions
By denition, an elastic collision is one that also conserves total kinetic energy so that the
total scalar kinetic energy of the colliding particles before the collision must equal the total kinetic
energy after the collision. This is an additional independent equation that the solution must satisfy.
It is assumed that all other contributions to the total mechanical energy (for example, gravi-
tational potential energy) are identical before and after if not just zero, again this is the impulse
approximation that states that all of these forces are negligible compared to the collision force over
the time t. However, two of your homework problems will treat exceptions by explicitly giving
you a conservative, slow interaction force (gravity and an inclined plane slope, and a spring) that
mediates the collision. You can use these as mental models for what really happens in elastic
collisions on a much faster and more violent time frame.
4.5.3: Fully Inelastic Collisions
For inelastic collisions, we will assume that the two particles form a single particle as a nal state
with the same total momentum as the system had before the collision. In these collisions, kinetic
energy is always lost. Since energy itself is technically conserved, we can ask ourselves: Where did
it go? The answer is: Into heat
101
!
One important characteristic of fully inelastic collisions, and the property that distinguishes
them from partially inelastic collisions, is that the energy lost to heat in a fully inelastic collision is
the maximum energy that can be lost in a momentum-conserving collision, as will be proven and
discussed below.
Inelastic collisions are much easier to solve than elastic (or partially inelastic) ones, because there
are fewer degrees of freedom in the nal state (only one velocity, not two).
4.5.4: Partially Inelastic Collisions
As suggested by their name, a partially inelastic collision is one where some kinetic energy is lost in
the collision (so it isnt elastic) but not the maximum amount. The particles do not stick together,
so there are in general two velocities that must be solved for in the after picture, just as there
are for elastic collisions. In general, since any energy from zero (elastic) to some maximum amount
(fully inelastic) can be lost during the collision, you will have to be given more information about
the problem (such as the velocity of one of the particles after the collision) in order to be able to
solve for the remaining information and answer questions.
4.5.5: Dimension of Scattering and Sucient Information
Given an actual force law describing a collision, one can in principle always solve the dynamical
dierential equations that result from applying Newtons Second Law to all of the masses and
nd their nal velocities from their initial conditions and a knowledge of the interaction force(s).
However, the solution of collisions involving all but the simplest interaction forces is beyond the
scope of this course (and is usually quite dicult).
The reason for dening the collision types above is because they all represent kinematic (math
with units) constraints that are true independent of the details of the interaction force beyond it
being either conservative (elastic) or non-conservative (fully or partially inelastic). In some cases the
kinematic conditions alone are sucient to solve the entire scattering problem! In others, however,
one cannot obtain a nal answer without knowing the details of the scattering force as well as the
initial conditions, or without knowing some of the details of the nal state.
To understand this, consider only elastic collisions. If the collision occurs in three dimensions,
one has four equations from the kinematic relations three independent momentum conservation
equations (one for each component) plus one equation representing kinetic energy conservation.
However, the outgoing particle velocities have six numbers in them three components each. There
simply arent enough kinematic constraints to be able to predict the nal state from the initial state
without knowing the interaction.
Many collisions occur in two dimensions think about the game of pool, for example, where
the cue ball elastically strikes the eight ball. In this case one has two momentum conservation
equations and one energy conservation equation, but one needs to solve for the four components of
two nal velocities in two dimensions. Again we either need to know something about the velocity
101
Or more properly, into Enthalpy, which is microscopic mechanical energy distributed among the atoms and
molecules that make up an object.
of one of the two outgoing particles say, its x-component or we cannot solve for the remaining
components without a knowledge of the interaction.
Of course in the game of pool
102
we do know something very important about the interaction.
It is a force that is exerted directly along the line connecting the centers of the balls at the instant
they strike one another! This is just enough information for us to be able to mentally predict that
the eight ball will go into the corner pocket if it begins at rest and is struck by the cue ball on the
line from that pocket back through the center of the eight ball. This in turn is sucient to predict
the trajectory of the cue ball as well.
Two dimensional elastic collisions are thus almost solvable from the kinematics. This makes them
too dicult for students who are unlikely to spend much time analyzing actual collisions (although
it is worth it to look them over in the specic context of a good example, one that many students
have direct experience with, such as the game of pool/billiards). Physics majors should spend some
time here to prepare for more dicult problems later, but life science students can probably skip
this without any great harm.
One dimensional elastic collisions, on the other hand, have one momentum conservation equation
and one energy conservation equation to use to solve for two unknown nal velocities. The number
of independent equations and unknowns match! We can thus solve one dimensional elastic collision
problems without knowing the details of the collision force from the kinematics alone.
Things are somewhat simpler for fully elastic collisions. Although one only has one, two, or three
momentum conservation equations, this precisely matches the number of components in the nal
velocity of the masses after they have stuck together. Fully inelastic collisions are thus the easiest
collision problems to solve.
Partially inelastic collisions in any number of dimensions are the most dicult to solve. There
one loses the energy conservation equation one cannot even solve the one dimensional partially
inelastic collision problem without either being given some additional information about the nal
state typically the nal velocity of one of the two particles so that the other can be found from
momentum conservation or solving the dynamical equations of motion, which is generally even
more dicult.
This explains why this textbook focuses on only four relatively simple collision problems. We
rst study elastic collisions in one dimension, solving them in two slightly dierent ways that provide
dierent insights into how the physics works out. I then talk briey about elastic collisions in two
dimensions in an elective section that can safely be omitted by non-physics majors (but is quite
readable, I hope). We then cover inelastic collisions, concentrating on the easiest case (fully inelastic)
but providing a simple example of a partially inelastic collision as well.
4.6: 1-D Elastic Collisions
In gure 53 above, we see a typical one-dimensional collision between two masses, m
1
and m
2
. m
1
has a speed in the x-direction v
1i
> 0 and m
2
has a speed v
2i
< 0, but our solution should not only
handle the specic picture above, it should also handle the (common) case where m
2
is initially at
rest (v
2i
= 0) or even the case where m
2
is moving to the right, but more slowly than m
1
so that
m
1
overtakes it and collides with it, v
1i
> v
2i
> 0. Finally, there is nothing special about the labels
1 and 2 our answer should be symmetric (still work if we label the mass on the left 2 and the
mass on the right 1).
We seek nal velocities that satisfy the two conditions that dene an elastic collision.
102
Or billiards.
X
cm
m
1
m
2
v
1i
v
2i
X
cm
m
1
m
2
v
1f
v
2f
Before Collision
After Collision
Figure 53: Before and after snapshots of an elastic collision in one dimension, illustrating the
important quantities.
Momentum Conservation:
p
1i
+ p
2i
= p
1f
+ p
2f
m
1
v
1i
x +m
2
v
2i
x = m
1
v
1f
x +m
2
v
2f
x (402)
m
1
v
1i
+m
2
v
2i
= m
1
v
1f
+m
2
v
2f
(x-direction only) (403)
Kinetic Energy Conservation:
E
k1i
+E
k2i
= E
k1f
+E
k2f
1
2
m
1
v
2
1i
+
1
2
m
2
v
2
2i
=
1
2
m
1
v
2
1f
+
1
2
m
2
v
2
2f
(404)
Note well that although our gure shows m
2
moving to the left, we expressed momentum conservation
without an assumed minus sign! Our solution has to be able to handle both positive and negative
velocities for either mass, so we will assume them to be positive in our equations and simply use a
negative value for e.g. v
2i
if it happens to be moving to the left in an actual problem we are trying
to solve.
The big question now is: Assuming we know m
1
, m
2
, v
1i
and v
2i
, can we nd v
1f
and v
2f
, even
though we have not specied any of the details of the interaction between the two masses during
the collision? This is not a trivial question! In three dimensions, the answer might well be no, not
without more information. In one dimension, however, we have two independent equations and two
unknowns, and it turns out that these two conditions alone suce to determine the nal velocities.
To get this solution, we must solve the two conservation equations above simultaneously. There
are three ways to proceed.
One is to use simple substitution manipulate the momentum equation to solve for (say) v
2f
in
terms of v
1f
and the givens, substitute it into the energy equation, and then brute force solve the
energy equation for v
1f
and back substitute to get v
2f
. This involves solving an annoying quadratic
(and a horrendous amount of intermediate algebra) and in the end, gives us no insight at all into
the conceptual physics of the solution. We will therefore avoid it, although if one has the patience
and care to work through it it will give one the right answer.
The second approach is basically a much better/smarter (but perhaps less obvious) algebraic
solution, and gives us at least one important insight. We will treat it the relative velocity
approach rst in the subsections below.
The third is the most informative, and (in my opinion) the simplest, of the three solutions
once one has mastered the concept of the center of mass reference frame outlined above. This center
of mass frame approach (where the collision occurs right in front of your eyes, as it were) is the one
I suggest that all students learn, because it can be reduced to four very simple steps and because it
yields by far the most conceptual understanding of the scattering process.
4.6.1: The Relative Velocity Approach
As I noted above, using direct substitution openly invites madness and frustration for all but the most
skilled young algebraists. Instead of using substitution, then, lets rearrange the energy conservation
equation and momentum conservation equations to get all of the terms with a common mass on the
same side of the equals signs and do a bit of simple manipulation of the energy equation as well:
m
1
v
2
1i
m
1
v
2
1f
= m
2
v
2
2f
m
2
v
2
2i
m
1
(v
2
1i
v
2
1f
) = m
2
(v
2
2f
v
2
2i
)
m
1
(v
1i
v
1f
)(v
1i
+v
1f
) = m
2
(v
2f
v
2i
)(v
2i
+v
2f
) (405)
(from energy conservation) and
m
1
(v
1i
v
1f
) = m
2
(v
2f
v
2i
) (406)
(from momentum conservation).
When we divide the rst of these by the second (subject to the condition that v
1i
= v
1f
and
v
2i
= v
2f
to avoid dividing by zero, a condition that incidentally guarantees that a collision occurs
as one possible solution to the kinematic equations alone is always for the nal velocities to equal
the initial velocities, meaning that no collision occured), we get:
(v
1i
+v
1f
) = (v
2i
+v
2f
) (407)
or (rearranging):
(v
2f
v
1f
) = (v
2i
v
1i
) (408)
This nal equation can be interpreted as follows in English: The relative velocity of recession
after a collision equals (minus) the relative velocity of approach before a collision. This
is an important conceptual property of elastic collisions.
Although it isnt obvious, this equation is independent from the momentum conservation equation
and can be used with it to solve for v
1f
and v
2f
, e.g.
v
2f
= v
1f
(v
2i
v
1i
)
m
1
v
1i
+m
2
v
2i
= m
1
v
1f
+m
2
(v
1f
(v
2i
v
1i
))
(m
1
+m
2
)v
1f
= (m
1
m
2
)v
1i
+ 2m
2
v
2i
(409)
Instead of just solving for v
1f
and either backsubstituting or invoking symmetry to nd v
2f
we now
work a bit of algebra magic that you wont see the point of until the end. Specically, lets add zero
to this equation by adding and subtracting m
1
v
1i
:
(m
1
+m
2
)v
1f
= (m
1
m
2
)v
1i
+ 2m
2
v
2i
+ (m
1
v
1i
m
1
v
1i
)
(m
1
+m
2
)v
1f
= (m
1
+m
2
)v
1i
+ 2 (m
2
v
2i
+m
1
v
1i
) (410)
(check this on your own). Finally, we divide through by m
1
+m
2
and get:
v
1f
= v
1i
+ 2
m
1
v
1i
+m
2
v
2i
m
1
+m
2
(411)
The last term is just two times the total initial momentum divided by the total mass, which we
should recognize to be able to write:
v
1f
= v
1i
+ 2v
cm
(412)
There is nothing special about the labels 1 and 2, so the solution for mass 2 must be identical :
v
2f
= v
2i
+ 2v
cm
(413)
although you can also obtain this directly by backsubstituting v
1f
into equation 408.
This solution looks simple enough and isnt horribly dicult to memorize, but the derivation is
dicult to understand and hence learn. Why do we perform the steps above, or rather, why should
we have known to try those steps? The best answer is because they end up working out pretty
well, a lot better than brute force substitutions (the obvious thing to try), which isnt very helpful.
Wed prefer a good reason, one linked to our eventual conceptual understanding of the scattering
process, and while equation 408 had a whi of concept and depth and ability to be really learned
in it (justifying the work required to obtain the result) the magical appearance of v
cm
in the nal
answer in a very simple and symmetric way is quite mysterious (and only occurs after performing
some adding-zero-in-just-the-right-form dark magic from the book of algebraic arts).
To understand the collision and why this in particular is the answer, it is easiest to put
everything into the center of mass (CM) reference frame, evaluate the collision, and
then put the results back into the lab frame! This (as we will see) naturally leads to the
same result, but in a way we can easily understand and that gives us valuable practice in frame
transformations besides!
4.6.2: 1D Elastic Collision in the Center of Mass Frame
Here is a bone-simple recipe for solving the 1D elastic collision problem in the center of mass frame.
a) Transform the problem (initial velocities) into the center of mass frame.
b) Solve the problem. The solution in the center of mass frame is (as we will see) trivial :
Reverse the center of mass velocities.
c) Transform the answer back into the lab/original frame.
Suppose as before we have two masses, m
1
and m
2
, approaching each other with velocities v
1i
and v
2i
, respectively. We start by evaluating the velocity of the CM frame:
v
cm
=
m
1
v
1i
+m
2
v
2i
m
1
+m
2
(414)
and then transform the initial velocities into the CM frame:
v
1i
= v
1i
v
cm
(415)
v
2i
= v
2i
v
cm
(416)
We know that momentum must be conserved in any inertial coordinate frame (in the impact
approximation). In the CM frame, of course, the total momentum is zero so that the momentum
conservation equation becomes:
m
1
v
1i
+m
2
v
2i
= m
1
v
1f
+m
2
v
2f
(417)
p
1i
+p
2i
= p
1f
+p
2f
= 0 (418)
Thus p
i
= p
1i
= p
2i
and p
f
= p
1f
= p
2f
. The energy conservation equation (in terms of the
ps) becomes:
p
2
i
2m
1
+
p
2
i
2m
2
=
p
2
f
2m
1
+
p
2
f
2m
2
or
p
2
i
_
1
2m
1
+
1
2m
2
_
= p
2
f
_
1
2m
1
+
1
2m
2
_
so that
p
2
i
= p
2
f
(419)
Taking the square root of both sides (and recalling that p
i
refers equally well to mass 1 or 2):
p
1f
= p
1i
(420)
p
2f
= p
2i
(421)
The + sign rather obviously satises the two conservation equations. The two particles keep
on going at their original speed and with their original energy! This is, actually, a perfectly good
solution to the scattering problem and could be true even if the particles hit each other. The more
interesting case (and the one that is appropriate for hard particles that cannot interpenetrate) is
for the particles to bounce apart in the center of mass frame after the collision. We therefore choose
the minus sign in this result:
p
1f
= m
1
v
1f
= m
1
v
1i
= p
1i
(422)
p
2f
= m
2
v
2f
= m
2
v
2i
= p
2i
(423)
Since the masses are the same before and after we can divide them out of each equation and
obtain the solution to the elastic scattering problem in the CM frame as:
v
1f
= v
1i
(424)
v
2f
= v
2i
(425)
or the velocities of m
1
and m
2
reverse in the CM frame.
This actually makes sense. It guarantees that if the momentum was zero before it is still zero,
and since the speed of the particles is unchanged (only the direction of their velocity in this frame
changes) the total kinetic energy is similarly unchanged.
Finally, it is trivial to put the these solutions back into the lab frame by adding v
cm
to them:
v
1f
= v
1f
+v
cm
= v
1i
+v
cm
= (v
1i
v
cm
) +v
cm
or
v
1f
= v
1i
+ 2v
cm
and similarly (426)
v
2f
= v
2i
+ 2v
cm
(427)
These are the exact same solutions we got in the rst example/derivation above, but now they have
considerably more meaning. The solution to the elastic collision problem in the CM frame is that
the velocities reverse (which of course makes the relative velocity of approach be the negative of the
relative velocity of recession, by the way). We can see that this is the solution in the center of mass
frame in one dimension without doing the formal algebra above, it makes sense!
Thats it then: to solve the one dimensional elastic collision problem all one has to do is transform
the initial velocities into the CM frame, reverse them, and transform them back. Nothing to it.
Note that (however it is derived) these solutions are completely symmetric we obviously dont
care which of the two particles is labelled 1 or 2, so the answer should have exactly the same
form for both. Our derived answers clearly have that property. In the end, we only need one
equation (plus our ability to evaluate the velocity of the center of mass):
v
f
= v
i
+ 2v
cm
(428)
valid for either particle.
If you are a physics major, you should be prepared to derive this result one of the various ways it
can be derived (Id strongly suggest the last way, using the CM frame). If you are e.g. a life science
major or engineer, you should derive this result for yourself at least once, at least one of the ways
(again, Id suggest that last one) but then you are also welcome to memorize/learn the resulting
solution well enough to use it.
Note well! If you remember the three steps needed for the center of mass frame derivation, even
if you forget the actual solution on a quiz or a test which is probably quite likely as I have little
condence in memorization as a learning tool for mountains of complicated material you have a
prayer of being able to rederive it on a test.
4.6.3: The BB/bb or Pool Ball Limits
In collision problems in general, it is worthwhile thinking about the ball bearing and bowling ball
(BB) limits
103
. In the context of elastic 1D collision problems, these are basically the asymptotic
results one obtains when one hits a stationary bowling ball (large mass, BB) with rapidly travelling
ball bearing (small mass, bb).
This should be something you already know the answer to from experience and intuition. We all
know that if you shoot a bb gun at a bowling ball so that it collides elastically, it will bounce back
o of it (almost) as fast as it comes in and the bowloing ball will hardly recoil
104
. Given that v
cm
in
this case is more or less equal to v
BB
, that is, v
cm
0 (just a bit greater), note that this is exactly
what the solution predicts.
What happens if you throw a bowling ball at a stationary bb? Well, we know perfectly well that
the BB in this case will just continue barrelling along at more or less v
c
m (still roughly equal to the
velocity of the more massive bowling ball) ditto, when your car hits a bug with the windshield, it
doesnt signicantly slow down. The bb (or the bug) on the other hand, bounces forward o of the
BB (or the windshield)!
In fact, according to our results above, it will bounce o the BB and recoil forward at approx-
imately twice the speed of the BB. Note well that both of these results preserve the idea derived
above that the relative velocity of approach equals the relative velocity of recession, and you can
transform from one to the other by just changing your frame of reference to ride along with BB or
bb two dierent ways of looking at the same collision.
Finally, there is the pool ball limit the elastic collision of roughly equal masses. When the
cue ball strikes another ball head on (with no English), then as pool players well know the cue ball
stops (nearly) dead and the other ball continues on at the original speed of the cue ball. This, too,
is exactly what the equations/solutions above predict, since in this case v
cm
= v
1i
/2.
Our solutions thus agree with our experience and intuition in both the limits where one mass is
much larger than the other and when they are both roughly the same size. One has to expect that
they are probably valid everywhere. Any answer you derive (such as this one) ultimately has to pass
the test of common-sense agreement with your everyday experience. This one seems to, however
dicult the derivation was, it appears to be correct!
103
Also known as the windshield and bug limits...
104
...and youll put your eye out kids, do not try this at home!
As you can probably guess from the extended discussion above, pool is a good example of a
game of approximately elastic collisions because the hard balls used in the game have a very
elastic coecient of restitution, another way of saying that the surfaces of the balls behave like
very small, very hard springs and store and re-release the kinetic energy of the collision from a
conservative impulse type force.
However, it also opens up the question: What happens if the collision between two balls is not
along a line? Well, then we have to take into account momentum conservation in two dimensions.
So alas, my fellow human students, we are all going to have to bite the bullet and at least think a
bit about collisions in more than one dimension.
4.7: Elastic Collisions in 2-3 Dimensions
As we can see, elastic collisions in one dimension are good because we can completely solve them
using only kinematics we dont care about the details of the interaction between the colliding
entities; we can nd the nal state from the initial state for all possible elastic forces and the only
dierences that will depend on the forces will be things like how long it takes for the collision to
occur.
In 2+ dimensions we at the very least have to work much harder to solve the problem. We will no
longer be able to use nothing but vector momentum conservation and energy conservation to solve the
problem independent of most of the details of the interaction. In two dimensions we have to solve for
four outgoing components of velocity (or momentum), but we only have conservation equations for
two components of momentum and kinetic energy. Three equations, four unknowns means that the
problem is indeterminate unless we are told at least one more thing about the nal state, such as one
of the components of the velocity or momentum of one of the outgoing masses. In three dimensions
it is even worse we must solve for six outgoing components of velocity/momentum but have only
four conservation equations (three momentum, one energy) and need at least two additional pieces of
information. Kinematics alone is simply insucient to solve the scattering problem need to know
the details of the potential/force of interaction and solve the equations of motion for the scattering
in order to predict the nal/outgoing state from a knowledge of the initial/incoming state.
The dependence of the outoing scattering on the interaction is good and bad. The good thing
is that we can learn things about the interaction from the results of a collision experiment (in one
dimension, note well, our answers didnt depend on the interaction force so we learn nothing at all
about that force aside from the fact that it is elastic from scattering data). The bad is that for the
most part the algebra and calculus involved in solving multidimensional collisions is well beyond
the scope of this course. Physics majors, and perhaps a few other select individuals in other majors
or professions, will have to sweat blood later to work all this out for a tiny handful of interaction
potentials where the problem is analytically solvable, but not yet!
Still, there are a few things that are within the scope of the course, at least for majors. These
involve learning a bit about how to set up a good coordinate frame for the scattering, and how to
treat hard sphere elastic collisions which turn out to be two dimensional, and hence solvable from
kinematics plus a single assumption about recoil direction in at least some simple cases. Lets look
at scattering in two dimensions in the case where the target particle is at rest and the outgoing
particles lie (necessarily) in a plane.
We expect both energy and momentum to be conserved in any elastic collision. This gives us
the following set of equations:
p
0x
= p
1x
+p
2x
(429)
p
0y
= p
1y
+p
2y
(430)
p
0z
= p
1z
+p
2z
(431)
(for momentum conservation) and
p
2
0
2m
1
= E
0
= E
1
+E
2
=
p
2
1
2m
1
+
p
2
2
m
2
(432)
for kinetic energy conservation.
We have four equations, and four unknowns, so we might hope to be able to solve it quite
generally. However, we dont really have that many equations if we assume that the scattering
plane is the x y plane, then necessarily p
0z
= p
1z
= p
2z
= 0 and this equation tells us nothing
useful. We need more information in order to be able to solve the problem.
Lets see what we can tell in this case. Examine gure 54. Note that we have introduced two
angles: and for the incident and target particles outgoing angle with respect to the incident
m
1
0
p
1
m
1
p p
1y
1x
p
2x
p
p
2y
2
p
2
m
Figure 54: The geometry for an elastic collision in a two-dimensional plane.
direction. Using them and setting p
0y
= p
0z
= 0 (and assuming that the target is at rest initially
and has no momentum at all initially) we get:
p
0x
= p
1x
+p
2x
= p
1
cos() +p
2
cos() (433)
p
0y
= p
1y
+p
2y
= 0 = p
1
sin() +p
2
sin() (434)
In other words, the momentum in the x-direction is conserved, and the momentum in the y-
direction (after the collision) cancels. The latter is a powerful relation if we know the y-momentum
of one of the outgoing particles, we know the other. If we know the magnitudes/energies of both,
we know an important relation between their angles.
This, however, puts us no closer to being able to solve the general problem (although it does help
with a special case that is on your homework). To make real progress, it is necessarily to once again
change to the center of mass reference frame by subtracting v
cm
from the velocity of both particles.
We can easily do this:
p
i1
= m
1
(v
0
v
cm
) = m
1
u
1
(435)
p
i2
= m
2
v
cm
= m
2
u
2
(436)
so that p
i1
+ p
i2
= p
tot
= 0 in the center of mass frame as usual. The initial energy in the center
of mass frame is just:
E
i
=
p
2
i1
2m
1
+
p
2
i2
2m
2
(437)
Since p
i1
= p
i2
= p
i
(the magnitudes are equal) we can simplify this a bit further:
E
i
=
p
2
i
2m
1
+
p
2
i
2m
2
=
p
2
i
2
_
1
m
1
+
1
m
2
_
=
p
2
i
2
_
m
1
+m
2
m
1
m
2
_
(438)
After the collision, we can see by inspection of
E
f
=
p
2
f
2m
1
+
p
2
f
2m
2
=
p
2
f
2
_
1
m
1
+
1
m
2
_
=
p
2
f
2
_
m
1
+m
2
m
1
m
2
_
= E
i
(439)
that p
f1
= p
f2
= p
f
= p
i
will cause energy to be conserved, just as it was for a 1 dimensional
collision. All that can change, then, is the direction of the incident momentum in the center of mass
frame. In addition, since the total momentum in the center of mass frame is by denition zero before
and after the collision, if we know the direction of either particle after the collision in the center of
mass frame, the other is the opposite:
p
f1
= p
f2
(440)
We have then solved the collision as much as it can be solved. We cannot uniquely predict the
direction of the nal momentum of either particle in the center of mass (or any other) frame without
knowing more about the interaction and e.g. the incident impact parameter. We can predict the
magnitude of the outgoing momenta, and if we know the outgoing direction alone of either particle
we can nd everything the magnitude and direction of the other particles momentum and the
magnitude of the momentum of the particle whose angle we measured.
As you can see, this is all pretty dicult, so well leave it at this point as a partially solved
problem, ready to be tackled again for specic interactions or collision models in a future course.
4.8: Inelastic Collisions
A fully inelastic collision is where two particles collide and stick together. As always, momentum
is conserved in the impact approximation, but now kinetic energy is not! In fact, we will see that
macroscopic kinetic energy is always lost in an inelastic collision, either to heat or to some sort of
mechanism that traps and reversibly stores the energy.
These collisions are much easier to understand and analyze than elastic collisions. That is because
there are fewer degrees of freedom in an inelastic collision we can easily solve them even in 2 or 3
dimensions. The whole solution is developed from
p
i,ntot
= m
1
v
1i
+m
2
v
2i
= (m
1
+m
2
)v
f
= (m
1
+m
2
)v
cm
= p
f,tot
(441)
In other words, in a fully inelastic collision, the velocity of the outgoing combined particle is the
velocity of the center of mass of the system, which we can easily compute from a knowledge of the
initial momenta or velocities and masses. Of course! How obvious! How easy!
From this relation you can easily nd v
f
in any number of dimensions, and answer many related
questions. The collision is solved. However, there are a number of dierent kinds of problems one
can solve given this basic solution things that more or less tag additional physics problems on to
the end of this initial one and use its result as their starting point, so you have to solve two or more
subproblems in one long problem, one of which is the inelastic collision. This is best illustrated
in some archetypical examples.
Example 4.8.1: One-dimensional Fully Inelastic Collision (only)
m
1
0
v
m
2
m
1
f
v
m
2
Figure 55: Two blocks of mass m
1
and m
2
collide and stick together on a frictionless table.
In gure 55 above, a block m
1
is sliding across a frictionless table at speed v
0
to strike a second
block m
2
initially at rest, whereupon they stick together and move together as one thereafter at
some nal speed v
f
.
Before, after, and during the collision, gravity acts but is opposed by a normal force. There is no
friction or drag force doing any work. The only forces in play are the internal forces mediating the
collision and making the blocks stick together. We therefore know that momentum is conserved
in this problem independent of the features of that internal interaction. Even if friction or drag forces
did act, as long as the collision took place instantly in the impact approximation, momentum would
still be conserved from immediately before to immediately after the collision, when the impulse p
of the collision force would be much, much larger than any change in momentum due to the drag
over the same small time t.
Thus:
p
i
= m
1
v
0
= (m
1
+m
2
)v
f
= p
f
(442)
or
v
f
=
mv
0
(m
1
+m
2
)
( = v
cm
) (443)
A traditional question that accompanies this is: How much kinetic energy was lost in the collision?
We can answer this by simply guring it out.
K = K
f
K
i
=
p
2
f
2(m
1
+m
2
)

p
2
i
2m
1
=
p
2
i
2
_
1
(m
1
+m
2
)

1
m
1
_
=
p
2
i
2
_
m
1
(m
1
+m
2
)
m
1
(m
1
+m
2
)
_
=
p
2
i
2m
1
_
m
2
(m
1
+m
2
)
_
=
_
m
2
(m
1
+m
2
)
_
K
i
(444)
where we have expressed the result as a fraction of the initial kinetic energy!
X
cm
m
1
m
2
v
1i
v
2i
X
cm
m
1
m
2
Before Collision
After Collision
+
Figure 56: Two blocks collide and stick together on a frictionless table in the center of mass frame.
After the collision they are both at rest at the center of mass and all of the kinetic energy they had
before the collision in this frame is lost.
There is a dierent way to think about the collision and energy loss. In gure 56 you see the
same collision portrayed in the CM frame. In this frame, the two particles always come together and
stick to remain, at rest, at the center of mass after the collision. All of the kinetic energy in
the CM frame is lost in the collision! Thats exactly the amount we just computed, but Im
leaving the proof of that as an exercise for you.
Note well the BB limits: For a light bb (m
1
) striking a massive BB (m
2
), nearly all the energy
is lost. This sort of collision between an asteroid (bb) and the earth (BB) caused at least one of
the mass extinction events, the one that ended the Cretaceous and gave mammals the leg up that
they needed in a world dominated (to that point) by dinosaurs. For a massive BB (m
1
) stricking
a light bb (m
2
) very little of the energy of the massive object is lost. Your truck hardly slows
when it smushes a bug inelastically against the windshield. In the equal billiard ball bb collision
(m
1
= m
2
), exactly one half of the initial kinetic energy is lost.
A similar collision in 2D is given for your homework, where a truck and a car inelastically collide
and then slide down the road together. In this problem friction works, but not during the collision!
Only after the instant (impact approximation) collision do we start to worry about the eect of
friction.
Example 4.8.2: Ballistic Pendulum
v
m
M
f
R
Figure 57: The ballistic pendulum, where a bullet strikes and sticks to/in a block, which then
swings up to a maximum angle
f
before stopping and swinging back down.
The classic ballistic pendulum question gives you the mass of the block M, the mass of the
bullet m, the length of a string or rod suspending the target block from a free pivot, and the
initial velocity of the bullet v
0
. It then asks for the maximum angle
f
through which the pendulum
swings after the bullet hits and sticks to the block (or alternatively, the maximum height H through
which it swings). Variants abound on your homework you might be asked to nd the minimum
speed v
0
the bullet must have in order the the block whirl around in a circle on a never-slack string,
or on the end of a rod. Still other variants permit the bullet to pass through the block and emerge
with a dierent (smaller) velocity. You should be able to do them all, if you completely understand
this example (and the other physics we have learned up to now, of course).
There is an actual lab that is commonly done to illustrate the physics; in this lab one typically
measures the maximum horizontal displacement of the block, but it amounts to the same thing once
one does the trigonometry.
The solution is simple:
During the collision momentum is conserved in the impact approximation, which in this
case basically implies that the block has no time to swing up appreciably during the actual
collision.
After the collision mechanical energy is conserved. Mechanical energy is not conserved
during the collision (see solution above of straight up inelastic collision).
One can replace the second sub-problem with any other problem that requires a knowledge of either
v
f
or K
f
immediately after the collision as its initial condition. Ballistic loop-the-loop problems are
entirely possible, in other words!
At this point the algebra is almost anticlimactic: The collision is one-dimensional (in the x-
direction). Thus (for block M and bullet m) we have momentum conservation:
p
m,0
= mv
0
= p
M+m,f
(445)
Now if we were foolish wed evaluate v
M+m,f
to use in the next step: mechanical energy conser-
vation. Being smart, we instead do the kinetic part of mechanical energy conservation in terms of
momentum:
E
0
=
p
2
B+b,f
2(M +m)
=
p
2
b,0
2(M +m)
= E
f
= (M +m)gH
= (M +m)gR(1 cos
f
) (446)
Thus:
f
= cos
1
(1
(mv
0
)
2
2(M +m)
2
gR
) (447)
which only has a solution if mv
0
is less than some maximum value. What does it mean if it is greater
than this value (there is no inverse cosine of an argument with magnitude bigger than 1)? Will this
answer work if > /2, for a string? For a rod? For a track?
Dont leave your common sense at the door when solving problems using algebra!
Example 4.8.3: Partially Inelastic Collision
Lets briey consider the previous example in the case where the bullet passes through the block and
emerges on the far side with speed v
1
< v
0
(both given). How is the problem going to be dierent?
Not at all, not really. Momentum is still conserved during the collision, mechanical energy after.
The only two dierences are that we have to evaluate the speed v
f
of the block M after the collision
from this equation:
p
0
= m
1
v
0
= Mv
f
+mv
1
= p
m
+p
1
= p
f
(448)
so that:
v
f
=
p
M
=
m(v
0
v
1
)
M
(449)
We can read this as the momentum transferred to the block is the momentum lost by the bullet
because momentum is conserved. Given v
f
of the block only, you should be able to nd e.g. the
kinetic energy lost in this collision or
f
or whatever in any of the many variants involving slightly
dierent after-collision subproblems.
4.9: Kinetic Energy in the CM Frame
Finally, lets consider the relationship between kinetic energy in the lab frame and the CM frame,
using all of the velocity relations we developed above as needed. We start with:
K
tot
=
i
1
2
m
i
v
2
i
=
i
p
2
i
2m
i
. (450)
in the lab/rest frame.
We recall (from above) that
v
i
= v
i
+v
cm
(451)
so that:
p
i
= m
i
v
i
= m
i
_
v
i
+v
cm
_
(452)
Then
K
i
=
p
2
i
2m
i
=
m
2
i
v
2
i
2m
i
+
2m
2
i
v
i
v
2
cm
2m
i
+
m
2
i
v
2
cm
2m
i
. (453)
If we sum this as before to construct the total kinetic energy:
K
tot
=
i
K
i
=
i
p
2
i
2m
i
+
P
2
tot
2M
tot
+v
cm
i
m
i
v
i
_
. .
=
P
i
p
i
= 0
v
cm
(454)
or
K
tot
= K(in cm) +K(of cm) (455)
We thus see that the total kinetic energy in the lab frame is the sum of the kinetic energy of all
the particles in the CM frame plus the kinetic energy of the CM frame (system) itself (viewed as
single object).
To conclude, at last we can understand the mystery of the baseball how it behaves like a particle
itself and yet also accounts for all of the myriad of particles it is made up of. The Newtonian motion
of the baseball as a system of particles is identical to that of a particle of the same mass experiencing
the same total force. The best location to assign the baseball (of all of the points inside) is the
center of mass of the baseball. In the frame of the CM of the baseball, the total momentum of the
parts of the baseball is zero (but the baseball itself has momentum M
tot
v relative to the ground).
Finally, the kinetic energy of a baseball ying through the air is the kinetic energy of the baseball
itself (the entire system viewed as a particle) plus the kinetic energy of all the particles that make
up the baseball measured in the CM frame of the baseball itself. This is comprised of rotational
kinetic energy (which we will shortly treat) plus all the general vibrational (atomic) kinetic energy
that is what we would call heat.
We see that we can indeed break up big systems into smaller/simpler systems, solve the smaler
problems, and reassemble the solutions into a big solution, even as we can combine many, many
small problems into one bigger and simpler problem and ignore or average over the details of what
goes on inside the little problems. Treating many bodies at the same time can be quite complex,
and weve only scratched the surface here, but it should be enough to help you understand both
many things in your daily life and (just as important) the rest of this book.
Next up (after the homework) well pursue this idea of motion in plus motion of a bit further
in the context of torque and rotating systems.
Homework for Week 4
Problem 1.
Problem 2.
x
y
M
R
This problem will help you learn required concepts such as:
Center of Mass
Integrating a Distribution of Mass
so please review them before you begin.
In the gure above, a uniformly thick piece of wire is bent into 3/4 of a circular arc as shown.
Find the center of mass of the wire in the coordinate system given, using integration to nd the x
cm
and y
cm
components separately.
Problem 3.
U(x)
x
E
E
1
2
E
3
Potential energy/total energy diagrams
Finding the force from the potential energy
Identifying turning points and stable/unstable equilibribum points on a graph of the potential
energy
Identifying classically forbidden versus allowed domains of motion (in one dimension) on an
energy diagram
a) On (a large copy of) the diagram above, place a small letter u to mark points of unstable
equilibrium.
b) Place the letter s to mark points of stable equilibrium.
c) On the curve itself, place a few arrows in each distinct region indicating the direction of the
force. Try to make the lengths of the arrows proportional in a relative way to the arrow you
draw for the largest magnitude force.
d) For the three energies shown, mark the turning points of motion with the letter t.
e) For energy E
2
, place
allowed
..
to mark out the classically allowed region where the particle
might be found. Place
. .
forbidden
to mark out the classically forbidden region where the particle
can never be found.
Problem 4.
-30
-20
-10
0
10
20
30
0 0.5 1 1.5 2
U
(
x
)
x
Energy conservation and the use of E = K +U in graphs.
Finding the force from the potential energy.
Finding turning points and stable/unstable equilibrium points from algebraic expressions for
the potential as well as visualizing the result on a graph.
An object moves in the force produced by a potential energy function:
U(x) =
1
x
12

10
x
6
This is a one-dimensional representation of an actual important physical potential, the Lennard-
Jones potential. This one-dimensional 12-6 Lennard-Jones potential models the dipole-induced
dipole Van der Waals interaction between two atoms or molecules in a gas, but the 12-10 form
can also model hydrogen bonds in physical chemistry. Note well that the force is strongly repulsive
inside the E = 0 turning point x
t
(which one can think of as where the atoms collide) but weakly
attractive for all x > x
0
, the position of stable equilibrium.
a) Write an algebraic expression for F
x
(x).
b) Find x
0
, the location of the stable equilibrium distance predicted by this potential.
c) Find U(x
0
) the binding energy for an object located at this distance.
d) Find x
t
, the turning point distance for E = 0. This is essentially the sum of the radii of the
two atoms (in suitable coordinates the parameters used in this problem are not intended to
be physical).
Problem 5.
M
M
m
m
(b)
v = 0 (for both)
H
v
M
v
m
(a)
Newtons Third Law
Momentum Conservation
Fully Elastic Collisions
A small block with mass m is sitting on a large block of mass M that is sloped so that the
small block can slide down the larger block. There is no friction between the two blocks, no friction
between the large block and the table, and no drag force. The center of mass of the small block
is located a height H above where it would be if it were sitting on the table, and both blocks are
started at rest (so that the total momentum of this system is zero, note well!)
a) Are there any net external forces acting in this problem? What quantities do you expect to
be conserved?
b) Using suitable conservation laws, nd the velocities of the two blocks after the small block has
slid down the larger one and they have separated.
c) To check your answer, consider the limiting case of M (where one rather expects the
larger block to pretty much not move). Does your answer to part b) give you the usual result
for a block of mass m sliding down from a height H on a xed incline?
d) This problem doesnt look like a collision problem, but it easily could be half of one. Look
carefully at your answer, and see if you can determine what initial velocity one should give
the two blocks so that they would move together and precisely come to rest with the smaller
block a height H above the ground. If you put the two halves together, you have solved a fully
elastic collision in one dimension in the case where the center of mass velocity is zero!
Problem 6.
1
1
1
2
2
2
(2 at rest)
o
v
cm
v
1
v
2
v
(b)
(c)
(a)
Newtons Third Law
Energy conservation
Impulse and average force in a collision
This problem is intended to walk you through the concepts associated with collisions in one
dimension.
In (a) above, mass m
1
approaches mass m
2
at velocity v
0
to the right. Mass m
2
is initially at
rest. An ideal massless spring with spring constant k is attached to mass m
2
and we will assume
that it will not be fully compressed from its uncompressed length in this problem.
Begin by considering the forces that act, neglecting friction and drag forces. What will be
conserved throughout this problem?
a) In (b) above, mass m
1
has collided with mass m
2
, compressing the spring. At the particular
instant shown, both masses are moving with the same velocity to the right. Find this velocity.
What physical principle do you use?
b) Also nd the compression x of the spring at this instant. What physical principle do you
use?
c) The spring has sprung back, pushing the two masses apart. Find the nal velocities of the
two masses. Note that the diagram assumes that m
2
> m
1
to guess the nal directions, but
in general your answer should make sense regardless of their relative mass.
d) So check this. What are the two velocities in the BB limits the m
1
m
2
(bowling ball
strikes ball bearing) and m
1
m
2
(ball bearing strikes bowling ball) limits? In other words,
does your answer make dimensional and intuitive sense?
e) In this particular problem one could in principle solve Newtons second law because the elastic
collision force is known. In general, of course, it is not known, although for a very sti spring
this model is an excellent one to model collisions between hard objects. Assuming that the
spring is suciently sti that the two masses are in contact for a very short time t, write a
simple expression for the impulse imparted to m
2
and qualitatively sketch F
av
over this time
interval compared to F
x
(t).
Problem 7.
m
M
v
v
o
o
f
v
Newtons Third Law
Fully Inelastic Collisions
In the gure above, a large, heavy truck with mass M speeds through a red light to collide with
a small, light compact car of mass m. Both cars fail to brake and are travelling at the speed limit
(v
0
) at the time of the collision, and their metal frames tangle together in the collision so that after
the collision they move as one big mass.
a) Which exerts a larger force on the other, the car or the truck?
b) Which transfers a larger momentum to the other, the car or the truck?
c) What is the nal velocity of the wreck immediately after the collision (please give (v
f
, ))?
d) How much kinetic energy was lost in the collision?
e) If the tires blow and the wreckage has a coecient of kinetic friction
k
with the ground after
the collision, set up an expression in terms of v
f
that will let you solve for how far the wreck
slides before coming to a halt. You do not need to substitute your expression from part c) into
this and get a nal answer, but you should denitely be able to do this on a quiz or exam.
Problem 8.
x
x
x
m m m
r b j
b
j
r
Center of Mass
Newtons Third Law
Romeo and Juliet are sitting in a boat at rest next to a dock, looking deeply into each others
eyes. Juliet, overcome with emotion, walks at a constant speed v relative to the water from her end
of the boat to sit beside him and give Romeo a kiss. Assume that the masses and initial positions
of Romeo, Juliet and the boat are (m
r
, x
r
), (m
j
, x
j
), (m
b
, x
b
), where x is measured from the dock
as shown, and D = x
j
x
r
is their original distance of separation.
a) While she is moving, the boat and Romeo are moving at speed v
in the opposite direction.

What is the ratio v
/v?
b) What is v
rel
= dD/dt, their relative speed of approach in terms of v.
c) How far has the boat moved away from the dock when she reaches him?
d) Make sure that your answer makes sense by thinking about the following BB limits: m
b

m
r
= m
j
; m
b
m
r
= m
j
.
Problem 9.
M
m
H
Newtons Second Law
Gravitation
Newtons Third Law
Impulse and Average Force
Fully Elastic Collisions
In the gure above, a feeder device provides a steady stream of beads of mass m that fall a
distance H and bounce elastically o of one of the hard metal pans of a beam balance scale (and
then fall somewhere else into a hopper and disappear from our problem). N beads per second come
out of the feeder to bounce o of the pan. Our goal is to derive an expression for M, the mass we
should put on the other pan to balance the average force exerted by this stream of beads
105
a) First, the easy part. The beads come o of the feeder with an initial velocity of v = v
0x
x in
the x-direction only. Find the y-component of the velocity v
y
when a single bead hits the pan
after falling a height H.
b) Since the beads bounce elastically, the x-component of their velocity is unchanged and the
y-component reverses. Find the change of the momentum of this bead p during its collision.
c) Compute the average force being exerted on the stream of beads by the pan over a second
(assuming that N 1, so that many beads strike the pan per second).
d) Use Newtons Third Law to deduce the average force exerted by the beads on the pan, and
from this determine the mass M that would produce the same force on the other pan to keep
the scale in balance.
105
This is very similar (conceptually) to the way a gas microscopically exerts a force on a surface that connes it;
we will later use this idea to understand the pressure exerted by a uid and to derive the kinetic theory of gases and
the ideal gas law PV = NkT, which is why I assign it in particular now.
Problem 10.
R
v
m
M
Conservation of Momentum
Conservation of Energy
Disposition of energy in fully inelastic collisions
Circular motion
The dierent kinds of constraint forces exerted by rigid rods versus strings.
A block of mass M is attached to a rigid massless rod of length R (pivot to center-of-mass of
the block/bullet distance at collision) and is suspended from a frictionless pivot. A bullet of mass
m travelling at velocity v strikes it as shown and is quickly stopped by friction in the hole so that
the two masses move together as one thereafter. Find:
a) The minimum speed v
r
that the bullet must have in order to swing through a complete circle
after the collision. Note well that the pendulum is attached to a rod!
b) The energy lost in the collision when the bullet is incident at this speed.
0 L
+x
2M
2
L
(x) = x
Center of Mass of Continuous Mass Distributions
Integrating Over Distributions
In the gure above a rod of total mass M and length L is portrayed that has been machined so
that it has a mass per unit length that increases linearly along the length of the rod:
(x) =
2M
L
2
x
This might be viewed as a very crude model for the way mass is distributed in something like a
baseball bat or tennis racket, with most of the mass near one end of a long object and very little
near the other (and a continuum in between).
Treat the rod as if it is really one dimensional (we know that the center of mass will be in the
center of the rod as far as y or z are concerned, but the rod is so thin that we can imagine that
y z 0) and:
a) verify that the total mass of the rod is indeed M for this mass distribution;
b) nd x
cm
, the x-coordinate of the center of mass of the rod.
Optional Problems
Optional Problem 12.
M
m
D
f
v
b
v
v
i
k
(block at rest)
The Impact Approximation
Elastic versus Inelastic Collisions
The Non-conservative Work-Mechanical Energy Theorem
In the gure above a bullet of mass m is travelling at initial speed v
i
to the right when it strikes
a larger block of mass M that is resting on a rough horizontal table (with coecient of friction
between block and table of
k
). Instead of sticking in the block, the bullet blasts its way through
the block (without changing the mass of the block signicantly in the process). It emerges with the
smaller speed v
f
, still to the right.
a) Find the speed of the block v
b
immediately after the collision (but before the block has had
time to slide any signicant distance on the rough surface).
b) Find the (kinetic) energy lost during this collision. Where did this energy go?
c) How far down the rough surface D does the block slide before coming to rest?
v
m
m
v
v
o
t
b
b
Vector Momentum Conservation
Fully Elastic Collisions in Two Dimensions
In the gure above, two identical billiard balls of mass m are sitting in a zero gravity vacuum (so
that we can neglect drag forces and gravity). The one on the left is given a push in the x-direction
so that it elastically strikes the one on the right (which is at rest) o center at speed v
0
. The top
ball recoils along the direction shown at a speed v
t
and angle
t
relative to the direction of incidence
of the bottom ball, which is deected so that it comes out of the collision at speed v
b
at angle
b
relative to this direction.
a) Use conservation of momentum to show that in this special case that the two masses are equal:
v
0
= v
u
+v
b
and draw this out as a triangle.
b) Use the fact that the collision was elastic to show that
v
2
0
= v
2
u
+v
2
b
(where these speeds are the lengths of the vectors in the triangle you just drew).
c) Identify this equation and triangle with the pythagorean theorem proving that in this case
v
t
v
b
(so that
u
=
b
+/2
Using these results, one can actually solve for v
u
and v
b
given only v
0
and either of
u
or
b
.
Reasoning very similar to this is used to analyze the results of e.g. nuclear scattering experiments
at various laboratories around the world (including Duke)!
230 Week 5: Torque and Rotation in One Dimension
Week 5: Torque and Rotation in
One Dimension
Summary
Rotations in One Dimension are rotations of a solid object about a single axis. Since we
are free to choose any arbitrary coordinate system we wish in a problem, we can without loss
of generality select a coordinate system where the z-axis represents the (positive or negative)
direction or rotation, so that the rotating object rotates in the xy plane. Rotations of a
rigid body in the xy plane can then be described by a single angle , measured by convention
in the counterclockwise direction from the positive x-axis.
Time-dependent Rotations can thus be described by:
a) The angular position as a function of time, (t).
b) The angular velocity as a function of time,
(t) =
d
dt
c) The angular acceleration as a function of time,
(t) =
d
dt
=
d
2
dt
2
Hopefully the analogy between these one dimensional angular coordinates and their one
dimensional linear motion counterparts is obvious.
Forces applied to a rigid object perpendicular to a line drawn from an axis of rotation exert
a torque on the object. The torque is given by:
= rF sin() = rF
= r
F
The torque (as we shall see) is a vector quantity and by convention its direction is perpendicular
to the plane containing r and

F in the direction given by the right hand rule. Although we
wont really work with this until next week, the proper denition of the torque is:
= r

F
Newtons Second Law for Rotation in one dimension is:
= I
where I is the moment of inertia of the rigid body being rotated by the torqe about a
given/specied axis of rotation. The direction of this (one dimensional) rotation is the right-
handed direction of the axis the direction your right handed thumb points if you grasp the
axis with your ngers curling around the axis in the direction of the rotation or torque.
231
The moment of inertia of a point particle of mass m located a (xed) distance r from
some axis of rotation is:
I = mr
2
The moment of inertia of a rigid collection of point particles is:
I =
i
m
i
r
2
i
the moment of inertia of a continuous solid rigid object is:
I =
_
r
2
dm
The rotational kinetic energy of a rigid body (total kinetic energy of all of the chunks of mass
that make it up) is:
K
rot
=
1
2
I
2
The work done by a torque as it rotates a rigid body through some angle d is:
dW = d
Hence the work-kinetic energy theorem becomes:
W =
_
d = K
rot
Consequently rotational work, rotational potential energy, and rotational kinetic energy call
all be simply added in the appropriate places to our theory of work and energy. The total
mechanical energy includes both the total translational kinetic energy of the rigid body treated
as if it is a total mass located at its center of mass plus the kinetic energy of rotation around
its center of mass:
K
tot
= K
cm
+K
rot
This is a special case of the last theorem we proved last week.
If we know the moment of inertia I
cm
of a rigid body about a given axis through its center of
mass, the Parallel Axis Theorem permits us to nd the moment of inertia of a rigid body
of mass m around a new axis parallel to this axis and displaced from it by a distance r
cm
:
I
new
= I
cm
+mr
2
cm
For a distribution of mass with planar symmetry (mirror symmetry about the plane of rotation
or distribution only in the plane of rotation), if we let z point in the direction of an axis of
rotation perpendicular to this plane and x and y be perpendicular axes in the plane of rotation,
then the Perpendicular Axis Theorem states that:
I
z
= I
x
+I
y
5.1: Rotational Coordinates in One Dimension
In the last week/chapter, you learned how a collection of particles can behave like a particle of the
same total mass located at the center of mass as far as Newtons Second Law is concerned. We also
saw at least four examples of how problems involving systems of particles can be decomposed into
two separate problems one the motion of the center of mass, which generally obeys Newtonian
dynamics as if the whole system is a particle, and the other the motion in the center of mass
system
106
.
This decomposition is useful (as we saw) even if the system has many particles in it and is uid
or non-interacting, but it is very useful in helping us to describe the motion of rigid bodies. This
is because the most general motion of a rigid object is the translation of (the center of mass of)
the object according to the total force acting on it and Newtons Second Law (as demonstrated last
week), plus the rotation of that body about its center of mass as unbalanced forces exert a torque
on the object.
The rst part we are very very familiar with at this point and well take it for granted that
you can solve for the motion of the center of mass of a rigid object given any reasonable net force.
The second we are not familiar with at all, and we will now take the next two weeks to study it in
detail and understand it, as rotation is just as important and common as translation when it
comes to understanding the motion of nearly everything we see on a daily basis. Doors rotate about
hinges, tires rotate about axles, electrons and protons just rotate because of their intrinsic spin,
our ngers and toes and head and arms and legs rotate about their joints, our whole bodies rotate
about their center of mass when we get up in the morning, when we do a twirl on ice skates, when
we summersault on a trampoline, the entire Earth rotates around its axis while revolving around the
sun which rotates on its axis while revolving around the Galactic center which... just goes to show
that rotation really is ubiquitous, and pretending that it isnt important or worthy of understanding
is not an option, even for future physicians or non-rocket-scientist bio majors.
It will take two weeks (and maybe even longer, for some of you) because rotation is a wee bit
complicated. For many of you, it will be the most dicult single topic we cover this semester, if only
because rotation is best described by means of the Evil Cross Product
107
. Just as we started our
study of coordinate motion with motion in only one dimension, so we will start our study or rotation
with one dimensional rotation of a rigid body, that is, the rotation of a rigid object through an
angle about a single xed axis
108
.
Eventually we want to be able to treat arbitrary rigid objects, ones that have their mass sym-
metrically but non-uniformly distributed (e.g. basketballs or ninja stars) or non-uniformly and not
particularly symmetrically distributed (e.g. the human body, automobiles, blobs of putty of arbi-
trary shape). But at the moment even the rotation of a basketball on the tip of a players nger
seems like too much for us to handle
We therefore start with the simplest possible example a rigid system with all of its mass
concentrated in a single point that rotates around some xed axis. Consider a small pointlike ball
of mass m on a rigid massless unstretchable rod, portrayed in gure 58. The rod itself is pivoted on
a frictionless axle in the center so that the mass is constrained to move only on the dashed circle in
the plane of the picture. The mass therefore maintains a constant distance from the pivot r is a
constant but the angle can vary in time as external forces act on the system.
The very rst things we need to do are to bring to mind the set of rotational coordinates that
106
In particular, we solved elastic collisions in the center of mass frame (where they were easy) while the center of
mass of the colliding system obeyed (trivial) Newtonian dynamics, we looked at the exploding rocket where the center
of mass followed the parabolic/Newtonian trajectory, we saw that inelastic collisions turn all of the kinetic energy in
the center of mass frame into heat, and we proved that in general the kinetic energy of a system in the lab is the sum
of the kinetic energy of the system (treated as a particle moving at speed v
cm
) plus the kinetic energy of all of the
particles in the center of mass frame this latter being the energy lost in a completely inelastic collision or conserved
in an elastic one!
107
Wikipedia: http://www.wikipedia.org/wiki/Cross Product. Something that is covered both in this Wikipedia
article and in the online Math Review supplement, so now is a really, really great time to pause in reading this
chapter and skip o to refresh your memory of it. It is a memory, we hope, isnt it? If not, then by all means skip o
to learn it...
108
The direction of a rotation is considered to be along the axis of its rotation in a right handed sense described
later below. So a one dimensional rotation is the rotation of any object about a single axis it does not imply that
the object being rotated is in any sense one dimensional.
r
r
v
s
x
y
Figure 58: A small ball of mass m rotates about a frictionless pivot, moving in a circle of radius r.
we have already introduced for doing kinematics of a rotating object. Since r is xed, the position
of the particle is uniquely determined by the positive angle (t), measured by convention as a
counterclockwise rotation about the z-axis from the +x-axis as drawn in gure 58. We call the
angular position of the particle.
We can easily relate r and to the real position of the particle. The distance the particle must
move in the counterclockwise direction from the standard reference position at (x = r, y = 0) around
the circular arc to an arbitrary position on the circle is s = r. s (the arc length) is a one dimensional
coordinate that describes its motion on the arc of the circle itself, and if we know r and s (the latter
measured from the +x-axis) we know exactly where the particle is in the x-y plane.
We recall that the tangential velocity of the particle on this circle is then
v
t
=
ds
dt
=
d(r)
dt
= r
d
dt
= r (456)
where we remind you of the angular velocity =
d
dt
. Note that for a rigid body v
r
=
dr
dt
= 0, that
is, the particle is constrained by the rigid rod or solidity of the body to move in circles of constant
radius r about the center of rotation or pivot so its speed moving towards or away from the circle is
zero.
Similarly, we can dierentiate one more time to nd the tangential acceleration:
a
t
=
dv
t
dt
= r
d
dt
= r
d
2
dt
2
= r (457)
where =
d
dt
=
d
2
dt
2
is the angular accleration of the particle.
Although the magnitude of v
r
= 0, we note well that the direction of v
t
is constantly changing
and we know that a
r
= v
2
/r = r
2
which we derived in the rst couple of weeks and by now
have used repeatedly to solve many problems.
All of this can reasonably be put in a small table that lets us compare and contrast the one
dimensional arc coordinates with the associated angular coordinates:
5.2: Newtons Second Law for 1D Rotations
With these coordinates in hand, we can now consider the angular version of Newtons Second Law
for a force

F applied to this particle as portrayed in gure 59. This is an example of a rigid body
Angular Arc Length
s = r
=
d
dt
v
t
=
ds
dt
= r
=
d
dt
a
t
=
dv
t
dt
= r
Table 2: Coordinates used for angular/rotational kinemetics in one dimension. Note that is the
rotation angle around a given xed axis, in our picture above the z-axis, and that must be given
in (dimensionless) radians for these relations to be true. Remember C = 2r is the formula for the
circumference of a circle and is a special case of the general relation s = r, but only when = 2
radians.
y
F
F
r
F
t
x
r
Figure 59: A force

F is applied at some angle (relative to r) to the ball on the pivoted massless
rod.
rotation, but because we arent yet ready to tackle extended objects all of the mass is concentrated
in the ball at radius r. Well handle true, extended rigid objects shortly, once we understand a few
basic things well.
Since the rod is rigid, and pivoted by an unmovable frictionless axle of some sort in the center,
the tension in the rod opposes any motion along r. If the particle is moving around the circle
at some speed v
t
(not shown), we expect that:
F
r
T = F cos() T = ma
r
= m
v
2
t
r
= mr
2
(458)
(where r is an outward directed radius, note that the acceleration is in towards the center) as usual.
The rotational motion is what we are really interested in. Newtons Law tangent to the circle is
just:
F
t
= F sin() = ma
t
= mr (459)
For reasons that will become clear in a bit, we will nd it very useful to multiply this whole equation
by r and redene rF
t
to be a new quantity called the torque, given the symbol . We will also
collect the factors of r and multiply them by the m to make a new quantity called the moment of
intertia and give it the symbol I:
= rF
t
= rF sin() = mr
2
= I (460)
In particular, this equation contains the moment of inertia of a point mass m moving in a
circle of radius r:
I
point mass
= mr
2
(461)
This looks like, and of course is, Newtons Second Law for a rigid rotating system in
one dimension, where force is replaced by torque, mass is replaced by moment of inertia, and linear
acceleration is replaced by angular acceleration.
Although to us so far this looks just like a trivial algebraic rewrite of something we could have
worked with just as easily as the real thing in the s coordinates, it is actually far more general and
powerful. To completely understand this, we need to understand two things. One of them is how
applying the force

F to (for example) the rod at dierent radii r
F
changes the angular acceleration
. The other is how a force

F applied at some radius r
F
to the massless rod internally redistributes
to muliple masses attached to the rod at dierent radii so that all the masses experience the same
angular acceleration. These are the subjects of the next two sections.
5.2.1: The r-dependence of Torque
Lets see how the angular acceleration of this mass will scale with the point of application of the
force along the rod, and in the process justify our inspired decision to multiply F
t
by r in our
denition of the torque in the previous section. To accomplish this we need a new gure, one where
the massless rigid rod extends out past/through the mass m so it can act as a lever arm on the mass
no matter where we choose to apply the force

F.
y
x
F
d
F
t
F
r
rod
dl
pivot
F
p
m
m
r
r
= Fsin( )
F
= r
F
d
Figure 60: The force

F is applied to the pivoted rod at an angle at the point r
F
with the mass
m attached to the rod at radius r
m
.
This is displayed in gure 60. A massless rod as long or longer than both r
m
and r
F
is pivoted
at one end so it can swing freely (no friction). The mass m is attached to the rod at the position
r
m
. A force

F is applied to the rod at the position r
F
(on the rod) and at an angle with respect
to the direction of r
F
.
Turning this into a suitable angular equation of motion is a bit of a puzzle. The force

F is not
applied directly to the mass it is applied to the massless rigid rod which in turn transmits some
of the force to the mass. However, the external force

F is not the only force acting on the rod!
In the previous example the pivot only exerted a radial force

F
p
= T, and exerted no tangential
force on m at all. We could even compute T (and hence

F
p
) if we knew , v
t
and

F from rotational
kinematics and some vector geometry. In this case, however, if

F exerts a force on the rod that can
be transmitted to and act tangentially upon the mass m, it rather seems that the unknown pivot
force

F
p
can as well, but we dont know

F
p
!
Alas, without knowing all of the forces that act tangentially on m, we cannot use Newtons
Second Law directly. This motivates us to consider using work and energy to obtain a dynamical
principle (basically working the derivation of the WKE theorem backwards) because the pivot does
not move and therefore the force

F
p
does no work! Consequently, the fact that we do not yet
know

F
p
will not matter!
So to work. Let us suppose that the force

F is applied to the rod for a time dt, and that during
that time the rod rotates through an angle d as shown. In this case we can easily nd the work
done by the force

F. The point on the rod where the force

F is applied moves a distance d = r
F
d.
The work is done only by the tangential component of the force moved through this distance F
t
so
that:
dW =

F d
= F
t
r
F
d (462)
The WKE theorem tells us that this work must equal the change in the kinetic energy over that
time:
F
t
r
F
d = dK =
d
_
1
2
mv
2
t
_
dt
dt = mv
t
dv
t
(463)
We make a few useful substitutions from table 3 above:
F
t
r
F
d = m
_
r
m
d
dt
_
(r
m
dt) = mr
2
m
d (464)
and cancel d (and reorder a bit) to get:
= r
F
F
t
= r
F
F sin() = mr
2
m
= I (465)
This formally proves that my guess of = I as being the correct form of Newtons Second
Law for this simple rotating rigid body holds up pretty well no matter where we apply the force(s)
that make up the torque, as long as we dene the torque:
= r
F
F
t
= r
F
F sin() (466)
It is left as an exercise for the student to draw a picture like the one above but involving many
independent and arbitrary forces,

F
1
acting at r
1
,

F
2
acting at r
2
, ..., you get:
tot
=
i
r
i
F
i
sin(
i
) = mr
2
m
= I (467)
for a single point-like mass on the rod at position r
m
. Note well that each
i
is the angle between
r
i
and

F
i
, and you should make the (massless, after all) rod long enough for all of the forces to be
able to act on it and also pass through m.
In a bit we will pay attention to the fact that rF sin() is the magnitude of the cross product
109
of r
F
and

F, and that if we assign the direction of the rotation to be parallel to the z-axis of a
right handed coordinate system when is drawn in the sense shown, we can even make this a vector
relation. For the moment, though, we will stick with our simple 1D scalar formulation and ask a
dierent question: what if we have a more complicated object than a single mass on a pivoted rigid
rod that is being driven by a torque (or sum of torques).
The answer is: We have to sum up the objects total moment of inertia around the pivot axis.
Lets prove this.
109
Wikipedia: http://www.wikipedia.org/wiki/Cross Product. Making this a gangbusters good time to go review
or learn cross products, at least well enough to be able evaluate their magnitude and direction (using the right hand
rule).
5.2.2: Summing the Moment of Inertia
Suppose we have a mass m
1
attached to our massless rod pivoted at the origin at the position r
1
,
and a second mass m
2
attached at position r
2
. We will then apply the force

F at an angle to
the (extended) rod at position r as shown in gure 61, and duplicate our reasoning from the last
chapter (because we still do not known the unknown force exerted by the pivot, but as long as we
consider work we dont have to.
x
F
r
2
1
r
m m
1 2
y
r
F
Figure 61: A single torque = r

F
F sin() is applied to a rod with two masses, m
1
at r
1
and m
2
at
r
2
.
The WKE theorem for this picture is now (note that v
1
and v
2
are both necessarily tangential):
dW = r
F
F sin() d = d = dK = m
1
v
1
dv
1
+m
2
v
2
dv
2
so as usual
d = m
1
_
r
1
d
dt
_
(r
1
dt) +m
2
_
r
2
d
dt
_
(r
2
dt)
= m
1
r
2
1
+m
2
r
2
2
=
_
m
1
r
2
1
+m
2
r
2
2
_
= I (468)
where we have now dened
I = m
1
r
2
1
+m
2
r
2
2
(469)
That is, the total moment of inertia of the two point masses is just the sum of their individual
moments of inertia. From the derivation it should be clear that if we added 3,4,...,N point masses
along the massless rod the total moment of inertia would just be the sum of their individual moments
of inertia.
Indeed, as we add more forces acting at dierent points and directions (in the plane) on the
rod and add more masses at dierent points on the rod, everything we did above clearly scales up
linearly we simply have to sum the total torque on the right hand side and sum the total moment
of inertia on the left hand side. We therefore conclude that Newtons Second Law for a system
constrained to rotate in (one dimension in a) a plane about a xed pivot is just:
tot
=
i
r
i
F
i
sin(
i
) =
j
m
j
r
2
j
= I
tot
(470)
So much for discrete forces and discrete masses. However, most rigid bodies that we experience
every day are, on a coarse-grained macroscopic scale, made up of a continuous distribution of mass,
and instead of a mythical idealized massless rigid rod all of this mass is glued together by means
of internal forces.
It is pretty clear that our expression = I will generalize to this case where we will (probably)
replace:
I =
j
m
j
r
2
j

_
r
2
dm (471)
but we will need to do just a teensy bit of work to show that this is true and extract any essential
conceptual insight to be found along the way.
5.3: The Moment of Inertia
We begin with a specic example to help smooth the way.
Example 5.3.1: The Moment of Inertia of a Rod Pivoted at One End
x
x
y
pivot
dx
L
dm = dx
Figure 62: A solid rod of length L with a mass M uniformly pivoted about one end. One can think
of such a rod as being the massless rod of the previous section with an innite number of masses
m
i
uniformly distributed along its length, that sum to the total mass M.
In gure 62 above a massive rod pivoted about one end is drawn. We would like to determine
how this particular rod will rotationally accelerate when we (for example) attach a force to it and
apply a torque. We therefore must characterize this rod as having a specic mass M, a specic
length L, and we need to say something about the way the mass is distributed, because the rod
could be made of aluminum (not very dense) at one end and tungsten (very dense indeed) at the
other and still look the same. We will assume that this rod is uniformly distributed, and that it is
very thin and symmetrical in cross-section shaped like a piece of wire or perhaps a wooden dowel
rod.
In a process that should be familiar to you from last week and from the previous section, we
know that the moment of inertia of a sum of discrete point masses hung on a massless rod (that
only serves to assemble them into a rigid structure) is just:
I
tot
=
i
m
i
r
2
i
(472)
the sum of the moments of inertia of the point masses.
We can clearly approximate the moment of inertia of the continuous rod by dividing it up into N
pieces, each of length x = L/N and mass M = M/N, and treating each small piece as a point
mass located at x
i
= i x:
I
rod

N
i=1
M
N
_
i L
N
_
=
N
i=1
Mx
2
i
(473)
As before, the limit of this sum as N is by denition the integral, and in this limit the sum
exactly represents the moment of inertia of the rod.
We can easily evaluate this. To do so, we chant our ritual expression: The mass of the chunk
is the mass per unit length of the chunk times the length of the chunk, or dm = dx =
M
L
dx, so:
I
rod
=
_
L
0
x
2
dm =
M
L
_
L
0
x
2
dx =
ML
2
3
(474)
5.3.1: Moment of Inertia of a General Rigid Body
This specic result can easily be generalized. If we consider a blob-shaped distribution of mass, the
dierential moment of inertia of a tiny chunk of the mass in the distribution about some xed axis
r
dm
pivot axis
Figure 63: A blob-shaped chunk of mass, perhaps a piece of modelling clay, constrained to rotate
about an axis through the blob, perhaps a straight piece of nearly massless coat-hanger wire.
of rotation is clearly:
dI = r
2
dm (475)
By now you should be getting the idea that summing up all of the little chunks that make up the
object is just integrating:
I
blob
=
_
blob
r
2
dm (476)
where it is quite one thing to write down this formal expression, quite another to be able to actually
do the integral over all of the chunks of mass that make up an object.
It isnt too dicult to do this integral for certain simple distributions of mass, and we will need a
certain stock repertoire of moments of inertia in order to solve problems. Which ones you should
learn to do depends on the level of the course math/physics majors should learn to integrate
over spheres (and maybe engineers as well), but everybody else can probably get away learning to
evaluate the moment of inertia of a disk. In practice, for any really complicated mass distribution
(like the blob of clay pictured above) one would either measure the moment of inertia or use a
computer to actually break the mass up into a very large number of discrete (but small/point-like)
chunks and do the sum.
First lets do an example that is even simpler than the rod.
Example 5.3.2: Moment of Inertia of a Ring
R
M
d
z
ds = Rd
Figure 64: A ring of mass M and radius R in the x-y plane rotates freely about the z-axis.
We would like to nd the moment of inertia of the ring of uniformly distributed mass M and
radius R portrayed in gure 64 above. A dierential chunk of the ring has length ds = R d. Its
mass is thus (say the ritual words!):
dm = ds =
M
2R
R d =
M
2
d (477)
and its moment of inertia is very simple:
I
ring
=
_
r
2
dm =
_
2
0
M
2
R
2
d = MR
2
(478)
In fact, we could have guessed this. All of the mass M in the ring is at the same distance R from
the axis of rotation, so its moment of inertia (which only depends on the mass times the distance
and has no vector character) is just MR
2
just like a point mass at that distance.
Because it is so important, we will do the moment of inertia of a disk next. The disk will be many
things to us a massive pulley, a wheel or tire, a yo-yo, a weight on a grandfather clock (physical)
pendulum. Here it is.
Example 5.3.3: Moment of Inertia of a Disk
d
R
M
dr
rd
dA =
rd dr
r
Figure 65: A disk of mass M and radius R is pivoted to spin freely around an axis through its center.
In gure 65 a disk of uniformly distributed mass M and radius R is drawn. We would like to
nd its moment of inertia. Consider the small chunk of disk that is shaded of area dA. In plane
polar coordinates (the only ones we could sanely hope to integrate over) the dierential area of this
chunk is just its dierential height dr times the width of the arc at radius r subtended by the angle
d, r d. The area is thus dA = r drd.
This little chunk was selected because the mass dm in it moves in a circle of radius r around the
pivot axis. We need to nd dm in units we can integrate to cover the disk. We use our litany to set:
dm = dA =
M
R
2
r drd (479)
and then write down:
dI = r
2
dm =
M
R
2
r
3
drd (480)
We integrate both sides to get (note that the integrals are independent one dimensional integrals
that precisely cover the disk):
I
disk
=
M
R
2
_
_
R
0
r
3
dr
_
__
2
0
d
_
=
M
R
2
_
R
4
4
_
(2)
=
1
2
MR
2
(481)
This is a very important and useful result, so keep it in mind.
5.3.2: Table of Useful Moments of Inertia
Finally, here is a table of a few useful moments of inertia of simple uniform objects. In each case
I indicate the value about an axis through the symmetric center of mass of the object, because we
can use the parallel axis theorem and the perpendicular axis theorem to nd the moments of
inertia around at least some alternative axes.
Shape I
cm
Rod from L/2 to L/2
1
12
ML
2
Ring MR
2
Disk
1
2
MR
2
Sphere
2
5
MR
2
Spherical Shell
2
3
MR
2
Generic Round Mass of Mass M and radius R MR
2
Table 3: A few useful moments of inertia of symmetric objects around an axis of symmetry through
their center of mass. You should probably know all of the moments in this table and should be able
to evaluate the rst three by direct integration.
5.4: Torque as a Cross Product
This section will be rather abbreviated this week; next week we will cover it in gory detail as a
vector relation. For the moment, however, we need to make a number of observations that will help
us solve problems. First, we know that the one-dimensional torque produced by any single force
acting on a rigid object a distance r from a pivot axis is just:
= rF
= rF sin() (482)
where F
is just the component of the force perpendicular to the (shortest) vector r from the pivot
axis to the point of application. This is really just one component of the total torque, mind you,
but it is the one we have learned so far and are covering this week.
First, lets make an important observation. Provided that r and

F lie in a plane (so that the
one dimension is the right dimension) the magnitude of the torque is the magnitude of the cross
product of r and

F:
= |r

F| = rF sin() = rF
= r
F (483)
Ive used the fact that I can move the sin() around to write this in terms of:
r
= r sin() (484)
which is the component of r perpendicular to F, also known as the moment arm of the
torque. This is a very useful form of the torque in many problems. It it equally well expressible in
terms of the familiar:
F
= F sin(), (485)
the component of

F perpendicular to r. This form, too, is often useful. In fact, both forms may be
useful (to evaluate dierent parts of the total torque) in a single problem!
If we let the vector torque be dened by:
= r

F (486)
marvelous things will happen. Next week we will learn about them, and will learn about how to
evaluate this a variety of ways. For now lets just learn one.
The vector torque has a magnitude |r

F| = rF sin() and points in the direction
given by the right hand rule.
The right hand rule, in turn, is the following:
The direction of the vector cross product

A

B is in the direction the thumb of your
right hand points when you begin with the ngers of your right hand lined up with the
vector

A and then curl them naturally through the angle < into the direction of

B.
That is, if you imagine grasping the axis in the direction of the torque with your right hand, your
ngers will curl around in the direction from r to

F through the smaller of the two angles in between
them (the one less than ).
You will get lots of practice with this rule, but be sure to practice with your right right hand, not
your wrong right hand. Countless students (and physics professors and TAs!) have been embarrassed
be being caught out evaluating the direction of cross products with their left hand
110
. Dont be one
of them!
The direction of the torque matters, even in one dimension. There is no better problem to
demonstrate this than the following one, determine what direction a spool of rope resting on a table
will roll when one pulls on the rope.
Example 5.4.1: Rolling the Spool
Im not going to quite nish this one for you, as there are a lot of things one can ask and it is a
homework problem. But I do want you to get a good start.
The spool in gure 66 is wrapped many times around with string. It is sitting on a level, rough
table so that for weak forces

F it will freely roll without slipping (although for a large enough

F of
course it will slip or even rise up o of the table altogether).
The question is, which direction will it roll (or will it not roll until it slides) for each of the three
directions in which the string is pulled.
The answer to this question depends on the direction of the total torque, and the relevant pivot
is the point that does not move when it rolls, where the (unknown!) force of static friction acts.
If we choose the pivot to be the point where the spool touches the table, then gravity, the normal
force and static friction all exert no torque! The only source of torque is

F.
So, what is the direction of the torque for each of the three forces drawn, and will a torque in
that direction make the mass roll to the left, the right, or slide (or not move)?
Think about it.
110
Let he or she who is without sin cast the rst stone, I always say. As long as it is cast with the right hand...
F
F
F
pivot
Figure 66: What direction does one expect the spool in each of the gures to roll (or will it roll at
all)?
5.5: Torque and the Center of Gravity
We will often wish to solve problems involving (for example) rods pivoted at one end swinging down
under the inuence of near-Earth gravity, or a need to understand the trajectory and motion of
a spinning basketball. To do this, we need the idea of the center of gravity of a solid object.
Fortunately, this idea is very simple:
The center of gravity of a solid object in an (approximately) uniform near-Earth
gravitational eld is located at the center of mass of the object. For the purpose of
evaluating the torque and angular motion or force and coordinate motion of center of
mass, we can consider that the entire force of gravity acting on the object is equivalent
to the the force that would be exerted by the entire mass located as a point mass at the
center of gravity.
The proof for this is very simple. Weve already done the Newtonian part of it we know that
the total force of gravity acting on an object makes the center of mass move like a particle with the
same mass located there. For torque, we recall that:
= rF
= r
F (487)
If we consider the torque acting on a small chunk of mass in near-Earth gravity, the force (down)
acting on that chunk is:
dF
y
= gdm (488)
The torque (relative to the pivot) is just:
d = gr
dm (489)
or
= g
_
L
0
r
dm = Mgr
cm
(490)
where r
cm
is (the component of) the position of the center of mass of the object perpendicular to
gravity. The torque due to gravity acting on the object around the selected pivot axis is the same
as the torque that would be produced by the entire weight of the object pulling down at the center
of mass/gravity. Q.E.D.
Note that this proof is valid for any shape or distribution of mass in a uniform gravitational eld,
but in a non-uniform eld it would fail and the center of gravity would be dierent from the center
of mass as far as computing torque is concerned. This is the realm of tides and will be discussed
more in the week where we cover gravity.
Example 5.5.1: The Angular Acceleration of a Hanging Rod
L/2
L
Mg
M
Figure 67: A rod of mass M and length L is suspended/pivoted from one end. It is pulled out to
some initial angle
0
and released.
This is your rst example of what we will later learn to call a physical pendulum. A rod is
suspended from a pivot at one end in near-Earth gravity. We wish to nd the angular acceleration
as a function of . This is basically the equation of motion for this rotational system later we
will learn how to (approximately) solve it.
As shown above, for the purpose of evaluating the torque, the force due to gravity can be
considered to be Mg straight down, acting at the center of mass/gravity of the rod (at L/2 in the
middle). The torque exerted at this arbitrary angle (positive as drawn, note that it is swung out
in the counterclockwise/right-handed direction from the dashed line) is therefore:
= rF
t
=
MgL
2
sin() (491)
It is negative because it acts to make smaller; it exerts a twist that is clockwise when is
counterclockwise and vice versa.
From above, we know that I = ML
2
/3 for a rod pivoted about one end, therefore:
=
MgL
2
sin() =
ML
2
3
= I or:
=
d
2
dt
2
=
3g
2L
sin() (492)
independent of the mass!
5.6: Solving Newtons Second Law Problems Involving Rolling
One of the most common applications of one dimensional torque and angular momentum is solving
rolling problems. Rolling problems include things like:
A disk rolling down an inclined plane.
An Atwoods Machine, but with a massive pulley.
An unwinding spool of line, either falling or being pulled.
These problems are all solved by using a combination of Newtons Second Law for the motion of
the center of mass of the rolling object (if appropriate) or other masses involved (in e.g. Atwoods
Machine) and Newtons Second Law for 1 dimensional rotation, = I. In general, they will also
involve using the rolling constraint:
If a round object of radius r is rolling without slipping, the distance x it travels relative
to the surface it is rolling on equals r, where is the angle it rolls through.
That is, all three are equivalently the rolling constraint for a ball of radius r rolling on a level
oor, started from a position at x = 0 where also = 0:
x = r (493)
v = r (494)
a = r (495)
(496)
These are all quite familiar results they look a lot like our angular coordinate relations but they
are not the same thing! These are constraints, not coordinate relations for a ball skidding
along the same oor they will be false, and for certain rolling pulley problems on your homework
youll have to gure out one appropriate for the particular radius of contact of spool-shaped or yo-yo
shaped rolling objects (that may not be the radius of the object!)
It is easier to demonstrate how to proceed for specic examples than it is to expound on the
theory any further. So lets do the simplest one.
Example 5.6.1: A Disk Rolling Down an Incline
r
mg
N
s
f
m
Figure 68: A disk of mass M and radius r sits on a plane inclined at an angle with respect to the
horizontal. It rolls without slipping down the incline.
In gure 68 above, a disk of mass M and radius r sits on an inclined plane (at an angle ) as
shown. It rolls without slipping down the incline. We would like to nd its acceleration a
x
down the
incline, because if we know that we know pretty much everything about the disk at all future times
that it remains on the incline. Wed also like to know what f
s
(the force exerted by static friction)
when it is so accelerating, so we can check to see if our assumption of rolling without slipping is
justied. If is too large, we are pretty sure intuitively that the disk will slip instead of roll, since
if /2 we know the disk will just fall and not roll at all.
As always, since we expect the disk to physically translate down the incline (so a and

F
tot
will
point that way) we choose a coordinate system with (say) the x-axis directed down the inline and y
directed perpendicular to the incline.
Since the disk rolls without slipping we know two very important things:
1) The force f
s
exerted by static friction must be less than (or marginally equal to)
s
N. If, in
the end, it isnt, then our solution is invalid.
2) If it does roll, then the distance x it travels down the incline is related to the angle it rolls
through by x = r. This also means that v
x
= r and a
x
= r.
We now proceed to write Newtons Laws three times: Once for the y-direction, once for the
x-direction and once for one dimensional rotation (the rolling). We start with the:
F
y
= N mg cos() = ma
y
= 0 (497)
which leads us to the familar N = mg cos().
Next:
F
x
= mg sin() f
s
= ma
x
(498)
= rf
s
= I (499)
Pay attention here, because well do the following sort of things fairly often in problems. We use
I = I
disk
=
1
2
mr
2
and = a
x
/r and divide the last equation by r on both sides. This gives us:
mg sin() f
s
= ma
x
(500)
f
s
=
1
2
ma
x
(501)
If we add these two equations, the unknown f
s
cancels out and we get:
mg sin() =
3
2
ma
x
(502)
or:
a
x
=
2
3
g sin() (503)
We can then substitute this back into the equation for f
s
above to get:
f
s
=
1
2
ma
x
=
1
3
mg sin() (504)
In order to roll without slipping, we know that f
s

s
N or
1
3
mg sin()
s
mg cos() (505)
or
s

1
3
tan() (506)
If
s
is smaller than this (for any given incline angle ) then the disk will slip as it rolls down
the incline, which is a more dicult problem.
Well solve this problem again shortly to nd out how fast it is going at the bottom of an incline
of length L using energy, but in order to this we have to address rotational energy. First, however,
we need to do a couple more examples.
m
m
1
2
m
1
g
m
2
g
T
T
r
M
T T
1
1
2
2
Figure 69: Atwoods Machine, but this time with a massive pulley of mass M and radius R. The
massless unstretchable string connecting the two masses rolls without slipping on the pulley,
exerting a torque on the pulley as the masses accelerate to match. Assume that the pulley has a
moment of inertia Mr
2
for some . Writing it this way lets us use
1
2
to approximate the pulley
with a disk, or use observations of a to measure and hence tell something about the distribution
of mass in the pulley!
Example 5.6.2: Atwoods Machine with a Massive Pulley
Our solution strategy is almost identical to that of our rst solution back in week 1 choose an
around the corner coordinate system where if we make moving m
2
down positive, then moving
m
1
up is also positive. To this we add that a positive rotation of the pulley is clockwise, and that
the rolling constraint is therefore a = r.
Now we again write Newtons Second Law once for each mass and once for the rotating pulley
(as = I):
m
2
g T
2
= m
2
a (507)
T
1
m
1
g = m
1
a (508)
= rT
2
rT
1
= Mr
2
a
r
= I (509)
Divide the last equation by r on both sides, then add all three equations to eliminate both
unknown tensions T
1
and T
2
. You should get:
(m
2
m
1
)g = (m
1
+m
2
+M)a (510)
or:
a =
(m
2
m
1
)g
(m
1
+m
2
+M)
(511)
This is almost like the previous solution and indeed, in the limit M 0 is the previous
solution but the net force between the two masses now must also partially accelerate the mass of
the pulley. Partially because only the mass near the rim of the pulley is accelerated at the full rate
a most of the mass near the middle of the pulley has a much lower acceleration.
Note also that if M = 0, T
1
= T
2
! This justies very much after the fact our assertion early
on that for a massless pulley, the tension in the string is everywhere constant. Here we see why that
is true because in order for the tension in the string between two points to be dierent, there has
to be some mass in between those points for the force dierence to act upon! In this problem, that
mass is the pulley, and to keep the pulley accelerating up with the string, the string has to exert a
torque on the pulley due to the unequal forces.
One last thing to note. We are being rather cavalier about the normal force exerted by the
pulley on the string all we can easily tell is that the total force acting up on the string must equal
T
1
+T
2
, the force that the string pulls down on the pulley with. Similarly, since the center of mass
of the pulley does not move, we have something like T
p
T
1
T
2
Mg = 0. In other words, there
are other questions I could always ask about pictures like this one, and by now you should have a
good idea how to answer them.
5.7: Rotational Work and Energy
r
dm
v
Center of Mass
Figure 70: A blob of mass rotates about an axis through the center of mass, with an angular velocity
as shown.
We have already laid the groundwork for studying work and energy in rotating systems. Let us
consider the kinetic energy of an object rotating around its center of mass as portrayed in gure 70.
The center of mass is at rest in this gure, so this is a center of mass inertial coordinate system.
It is easy for us to write down the kinetic energy of the little chunk of mass dm drawn into the
gure at a distance r from the axis of rotation. It is just:
dK
in CM
=
1
2
dmv
2
=
1
2
dmr
2
2
(512)
To nd the total, we integrate over all of the mass of the blob:
K
in CM
=
1
2
_
blob
dmr
2
2
=
1
2
I
2
(513)
which works because is the same for all chunks dm in the blob and is hence a constant
that can be taken out of the integral, leaving us with the integral for I.
If we combine this with the theorem proved at the end of the last chapter we at last can precisely
describe the kinetic energy of a rotating baseball in rest frame of the ground:
K =
1
2
Mv
2
cm
+
1
2
I
2
(514)
That is, the kinetic energy in the lab is the kinetic energy of the (mass moving as if it is all at the)
center of mass plus the kinetic energy in the center of mass frame,
1
2
I
2
. Well have a bit more to
say about this when we prove the parallel axis theorem later.
5.7.1: Work Done on a Rigid Object
We have already done rotational work. Indeed we began with rotational work in order to obtain
Newtons Second Law for one dimensional rotations above! However, there is much to be gained by
considering the total work done by an arbitrary force acting on an arbitrary extended rigid mass.
Consider the force

F in gure 71, where I drew a regular shape (a disk) only to make it easy to see
F
R
r
r
F
F
M
Figure 71: A force

F is applied in an arbitrary direction at an arbitrary point on an arbitrary rigid
object, decomposed in a center of mass coordinate frame. A disk is portrayed only because it makes
it easy to see where the center of mass is.
and draw an useful center of mass frame it could just as easy be a force applied to the blob-shaped
mass above in gure 70.
I have decomposed the force

F into two components:
F
r
= F cos() (515)
F
= F sin() (516)
(517)
Suppose that this force acts for a short time dt, beginning (for convenience) with the mass at rest.
We expect that the work done will consist of two parts:
dW = F
r
dr +F
ds (518)
where ds = r d. This is then:
dW = W
r
+W
= F
r
dr +rF
d = F
r
dr + d (519)
We know that:
dW
r
= F
r
dr = dK
r
(520)
dW
= d = dK
(521)
and if we integrate these independently, we get:
W
tot
= W
cm
+W
= K
cm
+ K
(522)
or the work decomposes into two parts! The work done by the component of the force through
the center of mass accelerates the center of mass and changes the kinetic energy of the center of
mass of the system as if it is a particle! The work done by the component of the force perpendicular
to the line connecting the center of mass to the point where the force is applied to the rigid object
increases the rotational kinetic energy, the kinetic energy in the center of mass frame.
Hopefully this is all making a certain amount of rather amazing, terrifying, sense to you. One
reason that torque and rotational physics is so important is that we can cleanly decompose the
physics of rotating rigid objects consistently, everywhere into the physics of the motion of the center
of mass and rotation about the center of mass. Note well that we have also written the WKE
theorem in rotational terms, and are now justied in using all of the results of the work and energy
chapter/week in (fully or partially) rotational problems!
Before we start, though, lets think a teeny bit about the rolling constraint and work, as we will
be solving many rolling problems.
5.7.2: The Rolling Constraint and Work
A car is speeding down the highway at 50 meters per second (quite fast!) being chased by the police.
Its tires hum as they roll down the highway without sliding. Fast as it is going, there are four points
on this car that are not moving at all relative to the ground! Where are they?
The four places where the tires are in contact with the pavement, of course. Those points arent
sliding on the pavement, they are rolling, and rolling means that they are coming down at rest
onto the pavement and then lifting up again as the tire rolls on.
If the car is travelling at a constant speed (and we neglect or arrange for their to be no
drag/friction) we expect that the road will exert no force along the direction of motion of the
car the force exerted by static friction will be zero. Indeed, thats why wheels were invented an
object that is rolling at constant speed on frictionless bearings requires no force to keep it going
wheels are a way to avoid kinetic/sliding friction altogether!
More reasonably, the force exerted by static friction will not be zero, though, when the car
speeds up, slows down, climbs or descends a hill, goes around a banked turn, overcomes drag forces
to maintain a constant speed.
What happens to the energy in all of these cases, when the only force exerted by the ground is
static friction at the points where the tire touches the ground? What is the work done by the force
of static friction acting on the tires?
Zero! The force of static friction does no work on the system.
If you think about this for a moment, this result is almost certain to make your head ache. On
the one hand, it is obvious:
dW
s
= F
s
dx = 0 (523)
because dx = 0 in the frame of the ground the place where the tires touch the ground does not
move, so the force of static friction acts through zero distance and does no work.
Um, but if static friction does no work, how does the car speed up (you might ask)? What else
could be doing work on the car? Oooo, head-starting-to-huuuurrrrrt...
Maybe, I dunno, the motor?
In fact, the cars engine exerts a torque on the wheels that is opposed by the pivot force at the
road the point of contact of a rolling object is a natural pivot to use in a problem, because forces
exerted there, in addition to doing no work, exert no torque about that particular pivot. By xing
that pivot point, the cars engine creates a net torque that accelerates the wheels and, since they
are xed at the pivot, propels the car forward. Note well that the actual source of energy, however,
is the engine, not the ground. This is key.
In general, in work/energy problems below, we will treat the force of static friction in rolling
problems (disks, wheels, tires, pulleys) where there is rolling without slipping as doing no work
and hence acting like a normal force or other force of constraint not exactly a conservative force
but one that we can ignore when considering the Generalized Non-Conservative Work Mechanical
Energy theorem or just the plain old WKE theorem solving problems.
Later, when we consider pivots in collisions, we will see that pivot forces often cause momentum
not to be conserved another way of saying that they can cause energy to enter or leave a system
but that they are generally not the source of the energy. Like a skilled martial artist, they do not
provide energy themselves, but they are very eective at diverting energy from one form to another.
In fact, very much like a skilled martial artist, come to think about it.
It isnt really a metaphor...
Example 5.7.1: Work and Energy in Atwoods Machine
m
m
1
2
m
1
g
m
2
g
T
T
r
M
T T
1
1
2
2
H
Figure 72: Atwoods Machine, but this time with a massive pulley of mass M and radius R (and
moment of inertia I = MR
2
), this time solving a standard conservation of mechanical energy
problem.
We would like to nd the speed v of m
1
and m
2
(and the angular speed of mass M) when mass
m
2
> m
1
falls a height H, beginning from rest, when the massless unstretchable string connecting
the masses rolls without slipping on the massive pulley. We could do this problem using a from
the solution to the example above, nding the time t it takes to reach H, and backsubstituting to
nd v, but by now we know quite well that it is a lot easier to use energy conservation (since no
non-conservative forces act if the string does not slip) which is already time-independent.
Figure ?? shows the geometry of the problem. Note well that mass m
1
will go up a distance H
at the same time m
2
goes down a distance H.
Again our solution strategy is almost identical to that of the conservation of mechanical energy
problems of two weeks ago. We simply evaluate the initial and nal total mechanical energy in-
cluding the kinetic energy of the pulley and using the rolling constraint and solve for v.
We can choose the zero of potential energy for the two mass separately, and choose to start m
2
a
height H above its nal position, and we start mass m
1
at zero potential. The nal potential energy
of m
2
will thus be zero and the nal potential energy of m
1
will be m
1
gH. Also, we will need to
substitute the rolling constraint into the expression for the rotational kinetic energy of the pulley in
the little patch of algebra below:
=
v
r
(524)
Thus:
E
i
= m
2
gH
E
f
= m
1
gH +
1
2
m
1
v
2
+
1
2
m
2
v
2
+
1
2
MR
2
2
or
m
2
gH = m
1
gH +
1
2
m
1
v
2
+
1
2
m
2
v
2
+
1
2
MR
2
2
and now we substitute the rolling constraint:
(m
2
m
1
)gH =
1
2
(m
1
+m
2
)v
2
+
1
2
MR
2
v
2
R
2
(m
2
m
1
)gH =
1
2
(m
1
+m
2
+M)v
2
(525)
to arrive at
v =
2(m
2
m
1
)gH
m
1
+m
2
+M
(526)
You can do this! It isnt really that dicult (or that dierent from what youve done before).
Note well that the pulley behaves like an extra mass M in the system all of this mass has
to be accelerated by the actual force dierence between the two masses. If = 1 a ring of mass
then all of the mass of the pulley ends up moving at v and all of its mass counts. However, for
a disk or ball or actual pulley, < 1 because some of the rotating pulleys mass is moving more
slowly than v and has less kinetic energy when the pulley is rolling.
Also note well that the strings do no net work in the system. They are internal forces, with T
2
doing negative work on m
2
but equal and opposite positive work on M, with T
1
doing negative work
on M, but doing equal and opposite positive work on m
1
. Ultimately, the tensions in the string serve
only to transfer energy between the masses and the pulley so that the change in potential energy is
correctly shared by all of the masses when the string rolls without slipping.
Example 5.7.2: Unrolling Spool
M
R
Mg
T
H
Figure 73: A spool of shing line is tied to a pole and released from rest to fall a height H, unrolling
as it falls.
In gure 73 a spool of shing line that has a total mass M and a radius R and is eectively a
disk is tied to a pole and released from rest to fall a height H. Lets nd everything: the acceleration
of the spool, the tension T in the shing line, the speed with which it reaches H.
We start by writing Newtons Second Law for both the translational and rotational motion. Well
make down y-positive. Why not! First the force:
F
y
= Mg T = Ma (527)
and then the torque:
= RT = I =
_
1
2
MR
2
_
a
R
(528)
We use the rolling constraint (as shown) to rewrite the second equation, and divide both
sides by R. Writing the rst and second equation together:
Mg T = Ma (529)
T =
1
2
Ma (530)
we add them:
Mg =
3
2
Ma (531)
and solve for a:
a =
2
3
g (532)
We back substitute to nd T:
T =
1
3
Mg (533)
Next, we tackle the energy conservation problem. Ill do it really fast and easy:
E
i
= MgH =
1
2
Mv
2
+
1
2
_
1
2
MR
2
_
= E
f
_
v
R
_
2
(534)
or
MgH =
3
4
Mv
2
(535)
and
v =
_
4gH
3
(536)
Example 5.7.3: A Rolling Ball Loops-the-Loop
m,r
H
R
Figure 74: A ball of mass m and radius r rolls without slipping to loop the loop on the circular track
of radius R.
Lets redo the Loop-the-Loop problem, but this time lets consider a solid ball of mass m
and radius r going around the track of radius R. This is a tricky problem to do precisely because
as the normal force decreases (as the ball goes around the track) at some point the static frictional
force required to keep the ball rolling on the track may well become greater than
s
N, at which
point the ball will slip. Slipping dissipates energy, so one would have to raise the ball slightly at the
beginning to accommodate this. Of course, raising the ball slightly at the beginning also increases
N so maybe it doesnt ever slip. So the best we can solve for is the minimum height H
min
it must
have to roll without slipping assuming that it doesnt ever actually slip, and reality is probably a
bit higher to accommodate or prevent slipping, overcome drag forces, and so on.
With that said, the problems solution is exactly the same as before except that in the energy
conservation step one has to use:
mgH
min
= 2mgR +
1
2
mv
2
min
+
1
2
I
2
min
(537)
plus the rolling constraint
min
= v
min
/r to get:
mgH
min
= 2mgR +
1
2
mv
2
min
+
1
5
mv
2
min
= 2mgR +
7
10
mv
2
min
(538)
Combine this with the usual:
mg =
mv
2
min
R
(539)
so that the ball barely loops the loop and you get:
H
min
= 2.7R (540)
only a tiny bit higher than needed for a block sliding on a frictionless track.
Really, not all that dicult, right? All it takes is some practice, both redoing these examples on
your own and doing the homework and it will all make sense.
5.8: The Parallel Axis Theorem
As we have seen, the moment of inertia of an object or collection of point-like objects is just
I =
i
m
i
r
2
i
(541)
where r
i
is the distance between the axis of rotation and the point mass m
i
in a rigid system, or
I =
_
r
2
dm (542)
where r is the distance from the axis of rotation to point mass dm in the rigid object composed
of continuously distributed mass.
However, in the previous section, we saw that the kinetic energy of a rigid object relative to an
arbitrary origin can be written as the sum of the kinetic energy of the object itself treated as a total
mass located at the (moving) center of mass plus the kinetic energy of the object in the moving
center of mass reference frame.
For the particular case where a rigid object rotates uniformly around an axis that is parallel to
an axis through the center of mass of the object, that is, in such a way that the angular velocity of
the center of mass equals the angular velocity around the center of mass we can derive a theorem,
called the Parallel Axis Theorem, that can greatly simplify problem solving while embodying the
previous result for the kinetic energies. Lets see how.
Suppose we want to nd the moment of inertia of the arbitrary blob shaped rigid mass dis-
tribution pictured above in gure 75 about the axis labelled New (Parallel) Axis. This is, by
r
dm
CM Axis
New (Parallel) Axis
r
r
cm
Figure 75: An arbitrary blob of total mass M rotates around the axis at the origin as shown. Note
well the geometry of r
cm
, r
, and r = r
cm
+r
.
denition (and using the fact that r = r
cm
+r
from the triangle of vectors shown in the gure):

I =
_
r
2
dm
=
_
_
r
cm
+r
_
r
cm
+r
_
dm
=
_
_
r
2
cm
+r
2
+ 2r
cm
r
_
dm
=
_
r
2
cm
dm+
_
r
2
dm+ 2r
cm
_
r
dm
= r
2
cm
_
dm+
_
r
2
dm+ 2Mr
cm
_
1
M
_
r
dm
_
= Mr
2
cm
+I
cm
+ 2Mr
cm
(0)
(543)
or
I = I
cm
+Mr
2
cm
(544)
In case that was a little fast for you, heres what I did. I substituted r
cm
+r
for r. I distributed
out that product. I used the linearity of integration to write the integral of the sum as the sum of
the integrals (all integrals over all of the mass of the rigid object, of course). I noted that r
cm
is
a constant and pulled it out of the integral, leaving me with the integral M =
_
dm. I noted that
_
r
2
dm is just I
cm
, the moment of intertia of the object about an axis through its center of mass. I
noted that (1/M)
_
r
dm is the position of the center of mass in center of mass coordinates, which

is zero by denition the center of mass is at the origin of the center of mass frame.
The result, in words, is that the moment of inertia of an object that uniformly rotates around
any axis is the moment of inertia of the object about an axis parallel to that axis through the center
of mass of the object plus the moment of inertia of the total mass of the object treated as a point
mass located at the center of mass as it revolves!
This sounds a lot like the kinetic energy theorem; lets see how the two are related.
As long as the object rotates uniformly that is, the object goes around its own center one time
for every time it goes around the axis of rotation, keeping the same side pointing in towards the
center as it goes then its kinetic energy is just:
K =
1
2
I
2
=
1
2
(Mr
2
cm
)
2
+
1
2
I
cm
2
(545)
A bit of algebraic legerdemain:
K =
1
2
(Mr
2
cm
)
_
v
cm
r
cm
_
2
+
1
2
I
cm
2
= K(ofcm) +K(incm) (546)
as before!
Warning! This will not work if an object is revolving many times around its own center of
mass for each time it revolves around the parallel axis.
Example 5.8.1: Moon Around Earth, Earth Around Sun
This is a conceptual example, not really algebraic. You may have observed that the Moon always
keeps the same face towards the Earth it is said to be gravitationally locked by tidal forces so
that this is true. This means that the Moon revolves once on its axis in exactly the same amount of
time that the Moon itself revolves around the Earth. We could therefore compute the total angular
kinetic energy of the Moon by assuming that it is a solid ball of mass M, radius r, in an orbit around
the Earth of radius R, and a period of 28.5 days:
I
moon
= MR
2
+
2
5
Mr
2
(547)
(from the parallel axis theorem),
=
2
T
(548)
(youll need to nd T in seconds, 86400 28.5) and then:
K =
1
2
I
moon
2
(549)
All thats left is the arithmetic.
Contrast this with the Earth rotating around the Sun. It revolves on its own axis 365.25 times
during the period in which it revolves around the Sun. To nd its kinetic energy we could not use
the parallel axis theorem, but we can still use the theorem at the end of the previous chapter. Here
we would nd two dierent angular velocities:
day
=
2
T
day
(550)
and
year
=
2
T
year
(551)
(again, 1 day = 86400 seconds is a good number to remember). Then if we let M be the mass of
the Earth, r be its radius, and R be the radius of its orbit around the Sun (all numbers that are
readily available on Wikipedia
111
we could nd the total kinetic energy (relative to the Sun) as:
K =
1
2
_
MR
2
_
2
year
+
1
2
_
2
5
Mr
2
_
2
day
(552)
which is somewhat more complicated, no?
Lets do a more readily evaluable example:
Example 5.8.2: Moment of Inertia of a Hoop Pivoted on One Side
In gure ?? a hoop of mass M and radius R is pivoted at a point on the side, on the hoop itself, not
in the middle. We already know the moment of inertia of the hoop about its center of mass. What
111
Wikipedia: http://www.wikipedia.org/wiki/Earth.
pivot
M
R
Figure 76: A hoop of mass M and radius R is pivoted on the side think of it as being hung on a
nail from a barn door.
is the moment of inertia of the hoop about this new axis parallel to the one through the center of
mass that we used before?
Its so simple:
I
side pivot
= MR
2
+I
cm
= MR
2
+MR
2
= 2MR
2
(553)
and were done!
For your homework, you get to evaluate the moment of inertia of a rod about an axis through
its center of mass and about one end of the rod and compare the two, both using direct integration
and using the parallel axis theorem. Good luck!
5.9: Perpendicular Axis Theorem
In the last section we saw how a bit of geometry and math allowed us to prove a very useful theorem
useful because we can now learn a short table of moments of inertia about a given axis through
the center of mass and then easily extend them to nd the moments of inertia of these same shapes
when they uniformly rotate around a parallel axis.
In this section we will similarly derive a theorem that is very useful for relating moments of
inertia of planar distributions of mass (only) around axes that are perpendicular to one another
the Perpendicular Axis Theorem. Heres how it goes.
x
y
x
y
z
r
M
dm
Figure 77: A planar blob of mass and the geometry needed to prove the Perpendicular Axis Theorem
Suppose that we wish to evaluate I
x
, the moment of inertia of the plane mass distribution M
shown in gure 77. Thats quite easy:
I
x
=
_
y
2
dm (554)
Similarly,
I
y
=
_
x
2
dm (555)
We add them, and presto chango!
I
x
+I
y
=
_
y
2
dm+
_
x
2
dm =
_
r
2
dm = I
z
(556)
This is it, the Perpendicular Axis Theorem:
I
z
= I
x
+I
y
(557)
Ill give a single example of its use. Lets nd the moment of inertia of a hoop about an axis
through the center in the plane of the loop!
Example 5.9.1: Moment of Inertia of Hoop for Planar Axis
M
x
y
z
R
Figure 78: A hoop of mass M and radius R is drawn. What is the moment of inertia about the
x-axis?
This one is really very, very easy. We use the Perpendicular Axis theorem backwards to get the
answer. In this case we know I
z
= MR
2
, and want to nd I
x
. We observe that from symmetry,
I
x
= I
y
so that:
I
z
= MR
2
= I
x
+I
y
= 2I
x
(558)
or
I
x
=
1
2
I
z
=
1
2
MR
2
(559)
Homework for Week 5
Problem 1.
Problem 2.
Denition/Evaluation of Moment of Inertia
Parallel Axis Theorem
a) Evaluate the moment of inertia of a uniform rod of mass M and length L about its center of
mass by direct integration.
L/2 L/2
x
y
pivot
b) Evaluate the moment of inertia of a uniform rod of mass M and length L about one end by
direct integration. Also evaluate it using the parallel axis theorem and the result you just
obtained. Which is easier?
L
x
y
pivot
Problem 3.
Denition/Evaluation of Moment of Inertia
a) Evaluate the moment of inertia of a uniform disk of mass M and radius R about its axis of
symmetry by direct integration (this can be set up as a one dimensional integral and hence
is not too dicult).
c)
pivot
b) Evaluate the moment of inertia of this disk around a pivot at the edge of the disk (for example,
a thin nail stuck through a hole at the outer edge) using the parallel axis theorem. Would you
care to do the actual integral to nd the moment of inertia of the disk in this case?
pivot
d)
Problem 4.
M,R
H
Newtons Second Law for Translation and Rotation
Moment of Inertia
Conservation of Mechanical Energy
Static Friction
A round object with mass m and radius R is released from rest to roll without slipping down
an inclined plane of height H at angle relative to horizontal. The object has a moment of inertia
I = mR
2
(where is a dimensionless number such as
1
2
or
2
5
, that might describe a disk or a solid
ball, respectively).
a) Begin by relating v (the speed of the center of mass) to the angular velocity (for the rolling
object). You will use this (and the related two equations for s and and a and ) repeatedly
in rolling problems.
b) Using Newtons second law in both its linear and rotational form plus the rolling constraint,
show that the acceleration of the object is:
a =
g sin()
1 +
c) Using conservation of mechanical energy, show that it arrives at the bottom of the incline with
a velocity:
v =
2gH
1 +
d) Show that the condition for the greatest angle for which the object will roll without slipping is
that:
tan() (1 +
1
)
s
where
s
is the coecient of static friction between the object and the incline.
Problem 5.
icy
rough
H
m,R
H
Rotational Kinetic Energy
Rolling Constraint.
A disk of mass m and radius R rolls without slipping down a rough slope of height H onto
an icy (frictionless) track at the bottom that leads up a second icy (frictionless) hill as shown.
a) How fast is the disk moving at the bottom of the rst incline? How fast is it rotating (what is
its angular velocity)?
b) Does the disks angular velocity change as it leaves the rough track and moves onto the ice (in
the middle of the at stretch in between the hills)?
c) How far up the second hill (vertically, nd H
) does the disk go before it stops rising?

Problem 6.
F
F
F
R
r
I (about cm)
mass m
Direction of torque
Rolling Constraint
In the gure above, a spool of mass m is wrapped with string around the inner spool. The spool
is placed on a rough surface (with coecient of friction
s
= 0.5) and the string is pulled with force
F 0.5 mg in the three directions shown.
a) For each picture, indicate the direction that the spool will accelerate.
b) For each picture, indicate the direction that static friction will point.
c) For each picture, nd the magnitude of the force exerted by static friction and the magnitude
of the acceleration of the spool. To do this, you will need to use symbols to indicate the radius
of the inner spool r, the radius of the outer spool R, and the moment of inertia of the spool
about its center of mass, I
cm
= mR
2
. Use 1/3 (reasonable for an arrangement like this)
to see if your answer for a makes sense.
Note that you do not need to know r, R or I
cm
to answer the rst two questions beyond what you
can directly see in the geometry of of the problem. Note also that you can use either the center of
mass or the point of contact with the ground (with the parallel axis theorem) as a pivot, the latter
being slightly easier.
Problem 7.
M
R
m
1 m
2
H
Newtons Second Law
Newtons Second Law for Rotating Systems (torque and angular acceleration)
Moments of Inertia
The Rolling Constraint
In the gure above Atwoods machine is drawn two masses m
1
and m
2
hanging over a massive
pulley which you can model as a disk of mass M and radius R, connected by a massless unstretchable
string. The string rolls on the pulley without slipping.
a) Draw three free body diagrams (isolated diagrams for each object showing just the forces
acting on that object) for the three masses in the gure above.
b) Convert each free body diagram into a statement of Newtons Second Law (linear or rotational)
for that object.
c) Using the rolling constraint (that the pulley rolls without slipping as the masses move up or
down) nd the acceleration of the system and the tensions in the string on both sides of the
pulley in terms of m
1
, m
2
, M, g, and R.
d) Suppose mass m
2
> m
1
and the system is released from rest with the masses at equal heights.
When mass m
2
has descended a distance H, use conservation of mechanical energy to nd
velocity of each mass and the angular velocity of the pulley.
Problem 8.
r
M
R
pivot
Newtons Second Law for rotating objects
Moment of Inertia
Work in rotating systems
Kinetic Energy in Lab versus CM
In the picture above, a physical pendulum is constructed by hanging a disk of mass M and radius
r on the end of a massless rigid rod in such a way that the center of mass of the disk is a distance
R away from the pivot and so that the whole disk pivots with the rod. The pendulum is pulled to
an initial angle
0
(relative to vertically down) and then released.
a) Find the torque about the pivot exerted on the pendulum by gravity at an arbitrary angle .
b) Integrate the torque from =
0
to = 0 to nd the total work done by the gravitational
torque as the pendulum disk falls to its lowest point. Note that your answer should be MgR(1
cos(
0
)) = MgH where H is the initial height above this lowest point.
c) Find the moment of inertia of the pendulum about the pivot (using the parallel axis theorem).
d) Set the work you evaluated in b) equal to the rotational kinetic energy of the disk
1
2
I
2
using
the moment of inertia you found in c). Solve for =
d
dt
when the disk is at its lowest point.
e) Show that this kinetic energy is equal to the kinetic energy of the moving center of mass of the
disk
1
2
Mv
2
plus the kinetic energy of the disks rotation about its own center of mass,
1
2
I
cm
2
,
at the lowest point.
As an optional additional step, write Newtons Second Law in rotational coordinates = I
(using the values for the magnitude of the torque and moment of inertia you determined above) and
solve for the angular acceleration as a function of the angle . In a few weeks we will learn to solve
this equation of motion for small angle oscillations, so it is good to practice obtaining it from the
basic physics now.
Problem 9.
m,r
H
R
Newtons Second Law
Moments of Inertia
The Rolling Constraint
Centripetal Acceleration
Static Friction
A solid ball of mass M and radius r sits at rest at the top of a hill of height H leading to a
circular loop-the-loop. The center of mass of the ball will move in a circle of radius R if it goes
around the loop. Recall that the moment of inertia of a solid ball is I
ball
=
2
5
MR
2
.
a) Find the minimum height H
min
for which the ball barely goes around the loop staying on the
track at the top, assuming that it rolls without slipping the entire time independent of the
normal force.
b) How does your answer relate to the minimum height for the earlier homework problem where
it was a block that slid around a frictionless track? Does this answer make sense? If it is
higher, where did the extra potential energy go? If it is lower, where did the extra kinetic
energy come from?
c) Discussion question for recitation: The assumption that the ball will roll around the track
without slipping if released from this estimated minimum height is not a good one. Why not?
F
M
m,R
M
F
Newtons Second Law (linear and rotational)
Rolling Constraint
Static and Kinetic Friction
Changing Coordinate Frames
A disk of mass m is resting on a slab of mass M, which in turn is resting on a frictionless
table. The coecients of static and kinetic friction between the disk and the slab are
s
and
k
,
respectively. A small force

F to the right is applied to the slab as shown, then gradually increased.
a) When

F is small, the slab will accelerate to the right and the disk will roll on the slab without
slipping. Find the acceleration of the slab, the acceleration of the disk, and the angular
acceleration of the disk as this happens, in terms of m, M, R, and the magnitude of the force
F.
b) Find the maximum force F
max
such that it rolls without slipping.
c) If F is greater than this, solve once again for the acceleration and angular acceleration of the
disk and the acceleration of the slab.
Hint: The hardest single thing about this problem isnt the physics (which is really pretty
straightfoward). It is visualizing the coordinates as the center of mass of the disk moves with a
dierent acceleration as the slab. I have drawn two gures above to help you with this the lower
gure represents a possible position of the disk after the slab has moved some distance to the right
and the disk has rolled back (relative to the slab! It has moved forward relative to the ground!
Why?) without slipping. Note the dashed radius to help you see the angle through which it has
rolled and the various dashed lines to help you relate the distance the slab has moved x
s
, the distance
the center of the disk has moved x
d
, and the angle through which it has rolled . Use this relation
to connect the acceleration of the slab to the acceleration and angular acceleration of the disk.
If you can do this one, good job!
Optional Problems
R
F
r
A cable spool of mass M, radius R and moment of inertia I = MR
2
is wrapped around its
OUTER disk with shing line and set on a rough rope as shown. The inner spool has a radius r.
The shing line is then pulled with a force F to the right so that it rolls down the rope without
slipping.
a) Find the magnitude and direction of the acceleration of the spool.
b) Find the force (magnitude and direction) exerted by the friction of the rope on the spool.
c) For one particular value of r, the frictional force is zero!. Find that value. For larger values,
which way does friction point? For smaller values, which way does friction point? At this
value, if the rope were not there would the motion be any dierent?
In analyzing the walking the spool problem in class and in the text above, students often ask
how they can predict which direction that static friction acts on a rolling spool, and I reply that
they cant! I cant, not always, because in this problem it can point either way and which way it
ultimately points depends on the details of R, r and ! The best you can do is make a reasonable
guess as to the direction and let the algebra speak if your answer comes out negative, friction
points the other way.
M
M
R M
M
R
Moment of Inertia
Newtons Second Law (translational and rotational)
A block of mass M sits on a smooth (frictionless) table. A mass M is suspended from an Acme
(massless, unstretchable, unbreakable) rope that is looped around the two pulleys, each with the
same mass M and radius R as shown and attached to the support of the rightmost pulley. The
two pulleys each have the moment of inertia of a disk, I =
1
2
MR
2
and the rope rolls on the pulleys
without slipping. At time t = 0 the system is released at rest.
a) Draw free body diagrams for each of the four masses. Dont forget the forces exerted by the
bar that attaches the pulley to the mass on the left or the pulley on the right to the table!
Note that some of these forces will cancel due to the constraint that the center of mass of
certain masses moves only in one direction or does not move at all. Note also that the torque
exerted by the weight of the pulley around the near corder of the mass on the table is not not
enough to tip it over.
b) Write the relevant form(s) of Newtons Second Law for each mass, translational and rotational
as needed, separately, wherever the forces in some direction do not cancel. Also write the
constraint equations that relate the accelerations (linear and angular) of the masses and pulleys.
c) Find the acceleration of the hanging mass M (only) in terms of the givens. Note that you
cant quite just add all of the equations you get after turning the torque equations into force
equations, but if you solve the equations simultaneously, systematically eliminating all internal
forces and tensions, youll get a simple enough answer.
d) Find the speed of the hanging mass M after it has fallen a height H, using conservation of total
mechanical energy. Show that it is consistent with the usual constant-acceleration-from-rest
answer v =
2aH for the acceleration found in c).

272 Week 6: Vector Torque and Angular Momentum
x
0
L
x
pivot
dx
Finding the Center of Mass using Integration
Finding the Moment of Inertia using Integration
A simple model for the one-dimensional mass distribution of a human leg of length L and mass
M is:
(x) = C (L +x
0
x)
Note that this quantity is maximum at x = 0, varies linearly with x, and vanishes smoothly at
x = L + x
0
. That means that it doesnt reach = 0 when x = L, just as the mass per unit length
of your leg doesnt reach zero at your ankles.
a) Find the constant C in terms of M, L, and x
0
by evaluating:
M =
_
L
0
(x) dx
and solving for C.
b) Find the center of mass of the leg (as a distance down the leg from the hip/pivot at the origin).
You may leave your answer in terms of C (now that you know it) or you can express it in
terms of L and x
0
only as you prefer.
c) Find the moment of inertia of the leg about the hip/pivot at the origin. Again, you may leave
it in terms of C if you wish or express it in terms of M, L and x
0
. Do your answers all have
the right units?
d) How might one improve the estimate of the moment of inertia to take into account the foot
(as a lump of extra mass m
f
out there at x = L that doesnt quite t our linear model)?
This is, as you can see, something that an orthopedic specialist might well need to actually do
with a much better model in order to e.g. outt a patient with an articial hip. True, they might
use a computer to do the actual computations required, but is it plausible that they could possibly
do what they need to do without knowing the physics involved in some detail?
Week 6: Vector Torque and
Angular Momentum
Summary
The vector torque acting on a point particle or rigid body is:
= r

F
where r is the vector from the pivot point (not axis!) to the point where the force is applied.
The vector angular momentum of a point particle is:
L = r p = m(r v)
where as before, r is a vector from the pivot point to the location of the particle and v is the
particles velocity.
The vector form for Newtons Second Law for Rotation for a point particle is:
=
d
L
dt
All of these relations generalize when computing the total vector torque acting on a collection
of particles (that may or may not form a rigid body) with a total angular momentum.
Provided that all the internal forces

F
ij
=
F
ji
act along the lines r
ij
connecting the particles,
there is no net torque due to the internal forces between particles and we get the series of results:
tot
=
ext
i
L
tot
=
i
r
i
p
i
and
tot
=
d
L
tot
dt
The Law of Conservation of Angular Momentum is:
If (and only if) the total torque acting on a system is zero, then the total
angular momentum of the system is a constant vector (conserved).
or in equationspeak:
If (and only if)
tot
= 0, then

L
tot
is a constant vector.
273
For rigid objects (or collections of point particles) that have mirror symmetry across the
axis of rotation and/or mirror symmetry across the plane of rotation, the vector
angular momentum can be written in terms of the scalar moment of inertia about the axis
of rotation (dened and used in week 5) and the vector angular velocity as:
L = I
For rigid objects or collections of point particles that lack this symmetry with respect to an
axis of rotation (direction of )
L = I
for any scalar I. In general,

L precesses around the axis of rotation in these cases and requires
a constantly varying nonzero torque to drive the precession.
When two (or more) isolated objects collide, both momentum and angular momentum is
conserved. Angular momentum conservation becomes an additional equation (set) that can be
used in analyzing the collision.
If one of the objects is pivoted, then angular momentum about this pivot is conserved but in
general momentum is not conserved as the pivot itself will convey a signicant impulse to the
system during the collision.
Radial forces any force that can be written as

F = F
r
r exert no torque on the masses that
they act on. Those object generally move in not-necessarily-circular orbits with constant
angular momentum.
When a rapidly spinning symmetric rotator is acted on by a torque of constant magnitude
that is (always) perpendicular to the plane formed by the angular momentum and a vector
in second direction, the angular momentum vector precesses around the second vector. In
particular, for a spinning top with angular momentum

L tipped at an angle to the vertical,
the magnitude of the torque exerted by gravity and the normal force on the top is:
= |
Dmg z| = mgDsin() =
L
dt
= Lsin()
p
or
p
=
mgD
L
In this expression,
p
is the angular precession frequency of the top and

D is the vector
from the point where the tip of the top rests on the ground to the center of mass of the top.
The direction of precession is determined by the right hand rule.
6.1: Vector Torque
In the previous chapter/week we saw that we could describe rigid bodies rotating about a single axis
quite accurately by means of a modied version of Newtons Second Law:
= r
F
F sin() = |r
F

F| = I (560)
where I is the moment of inertia of the rigid body, evaluated by summing/integrating:
I =
i
m
i
r
2
i
=
_
r
2
dm (561)
In the torque expression r
F
is a was a vector in the plane perpendicular to the axis of rotation
leading from the axis of rotation to the point where the force was applied. r in the moment of inertia
I was similarly the distance from the axis of rotation of the particular mass m or mass chunk dm.
We considered this to be one dimensional rotation because the axis of rotation did not change, all
rotation was about that one xed axis.
This is, alas, not terribly general. We started to see that at the end when we talked about the
parallel and perpendicular axis theorem and the possibility of several moments of inertia for a
single rigid object around dierent rotation axes. However, it is really even worse than that. Torque
(as we shall see) is a vector quantity, and it acts to change another vector quantity, the angular
momentum of not just a rigid object, but an arbitrary collection of particles, much as force did
when we considered the center of mass. This will have a profound eect on our understanding of
certain kinds of phenomena. Lets get started.
We have already identied the axis of rotation as being a suitable direction for a one-dimensional
torque, and have adopted the right-hand-rule as a means of selecting which of the two directions
along the axis will be considered positive by convention. We therefore begin by simply generalizing
this rule to three dimensions and writing:
= r

F (562)
where (recall) r

F is the cross product of the two vectors and where r is the vector from the
origin of coordinates or pivot point, not the axis of rotation to the point where the force
F is being applied.
Time for some vector magic! Lets write

F = d p/dt or
112
:
= r

F = r
d p
dt
=
d
dt
(r mv)
dr
dt
mv =
d
dt
r p (563)
The last term vanishes because v = dr/dt and v mv = 0 for any value of the mass m.
Recalling that

F = d p/dt is Newtons Second Law for vector translations, let us dene:
L = r p (564)
as the angular momentum vector of a particle of mass m and momentum p located at a vector
position r with respect to the origin of coordinates.
In that case Newtons Second Law for a point mass being rotated by a vector torque is:
=
d
L
dt
(565)
which precisely resembles Newtsons Second Law for a point mass being translated by a vector
torque.
This is good for a single particle, but what if there are many particles? In that case we have to
recapitulate our work at the beginning of the center of mass chapter/week.
6.2: Total Torque
In gure 79 a small collection of (three) particles is shown, each with both external forces

F
i
and
internal forces

F
ij
portrayed. The forces and particles do not necessarily live in a plane we
simply cannot see their z-components. Also, this picture is just enough to help us visualize, but be
thinking 3, 4...N as we proceed.
112
Im using
d
dt
r p =
dr
dt
p+r
d p
dt
to get this, and subtracting the rst term over to the other side.
F
r
3
1
r
2
r
F
1
2
m
2
m
3
F
3
m
1
13
31
32
23
12
31 F
F
F
F
F
F
Figure 79: The coordinates of a small collection of particles, just enough to illustrate how internal
torques work out.
Let us write = d
L/dt for each particle and sum the whole thing up, much as we did for
F = d p/dt in chapter/week 4:
tot
=
i
r
i
_
_
F
i
+
j=i
F
ij
_
_
=
d
dt
i
r
i
p
i
=
d
L
tot
dt
_
i
r
i

F
i
_
+
_
_
j=i
r
i

F
ij
_
_
=
d
dt
i
r
i
p
i
(566)
Consider the term that sums the internal torques, the torques produced by the internal forces
between the particles, for a particular pair (say, particles 1 and 2) and use good old N3,

F
21
=
F
12
:
r
1

F
12
+r
2

F
21
= r
1

F
12
r
2

F
12
= (r
1
r
2
)

F
12
= 0 (!) (567)
because r
12
= r
1
r
2
is parallel or antiparallel to

F
12
and the cross product of two vectors that
are parallel or antiparallel is zero.
Obviously, the same algebra holds for any internal force pair so that:
_
_
j=i
r
i

F
ij
_
_
= 0 (568)
and
tot
=
i
r
i

F
i
=
d
dt
i
r
i
p
i
=
d
L
tot
dt
(569)
where
tot
is the sum of only the external torques the internal torques cancel.
The physical meaning of this cancellation of internal torques is simple just as you cannot
lift yourself up by your own bootstraps, because internal opposing forces acting along the lines
connecting particles can never alter the velocity of the center of mass or the total momentum of the
system, you cannot exert a torque on yourself and alter your own total angular momentum only
the total external torque acting on a system can alter its total angular momentum.
Wait, whats that? An isolated system (one with no net force or torque acting) must have a
constant angular momentum? Sounds like a conservation law to me...
6.2.1: The Law of Conservation of Angular Momentum
Weve basically done everything but write this down above, so lets state it clearly in both words
and algebraic notation. First in words:
If and only if the total vector torque acting on any system of particles is zero, then
the total angular momentum of the system is a constant vector.
In equations it is even more succinct:
If and only if
tot
= 0 then

L
tot
=

L
initial
=

L
nal
= a constant vector (570)
Note that (like the Law of Conservation of Momentum) this is a conditional law angular
momentum is conserved if and only if the net torque acting on a system is zero (so if angular
amomentum is conserved, you may conclude that the total torque is zero as that is the only way it
could come about).
Just as was the case for Conservation of Momentum, our primary use at this point for Con-
servation of Angular Momentum will be to help analyze collisions. Clearly the internal forces in
two-body collisions in the impulse approximation (which allows us to ignore the torques exerted
by external forces during the tiny time t of the impact) can exert no net torque, therefore we
expect both linear momentum and angular momentum to be conserved during a collision.
Before we proceed to analyze collisions, however, we need to understand angular momentum
(the conserved quantity) in more detail, because it, like momentum, is a very important quantity in
nature. In part this is because many elementary particles (such as quarks, electrons, heavy vector
bosons) and many microscopic composite particles (such as protons and neutrons, atomic nuclei,
atoms, and even molecules) can have a net intrinsic angular momentum, called spin
113
.
This spin angular momentum is not classical and does not arise from the physical motion of
mass in some kind of path around an axis and hence is largely beyond the scope of this class,
but we certainly need to know how to evaluate and alter (via a torque) the angular momentum of
macroscopic objects and collections of particles as they rotate about xed axes.
6.3: The Angular Momentum of a Symmetric Rotating Rigid
Object
One very important aspect of both vector torque and vector angular momentum is that r in the
denition of both is measured from a pivot that is a single point, not measured from a
pivot axis as we imagined it to be last week when considering only one dimensional rotations.
We would very much like to see how the two general descriptions of rotation are related, though,
especially as at this point we should intuitively feel (given the strong correspondance between one-
dimensional linear motion equations and one-dimensional angular motion equations) that something
like L
z
= I
z
ought to hold to relate angular momentum to the moment of inertia. Our intuition is
mostly correct, as it turns out, but things are a little more complicated than that.
From the derivation and denitions above, we expect angular momentum

L to have three com-
ponents just like a spatial vector. We also expect to be a vector (that points in the direction of the
right-handed axis of rotation that passes through the pivot point). We expect there to be a linear
relationship between angular velocity and angular momentum. Finally, based on our observation
of an extremely consistent analogy between quantities in one dimensional linear motion and one
dimensional rotation, we expect the moment of inertia to be a quantity that transforms the angular
velocity into the angular momentum by some sort of multiplication.
To work out all of these relationships, we need to start by indexing the particular axes in the
coordinate system we are considering with e.g. a = x, y, z and label things like the components of
113
Wikipedia: http://www.wikipedia.org/wiki/Spin (physics). Physics majors should probably take a peek at this
link, as well as chem majors who plan to or are taking physical chemistry. I foresee the learning of Quantum Theory
in Your Futures, and believe me, you want to preload your neocortex with lots of quantum cartoons and glances at
the algebra of angular momentum in quantum theory ahead of time...
L, and I with a. Then L

a=z
is the z-component of

L,
a=x
is the x-component of and so on.
This is simple enough.
It is not so simple, however, to generalize the moment of inertia to three dimensions. Our simple
one-dimensional scalar moment of inertia from the last chapter clearly depends on the particular
axis of rotation chosen! For rotations around the (say) z-axis we needed to sum up I =
i
m
i
r
2
i
(for example) where r
i
=
_
x
2
i
+y
2
i
, and these components were clearly all dierent for a rotation
around the x-axis or a z axis through a dierent pivot (perpendicular or parallel axis theorems).
These were still the easy cases as well see below, things get really complicated when we rotate
even a symmetric object around an axis that is not an axis of symmetry of the object!
Indeed, what we have been evaluating thus far is more correctly called the scalar moment of
inertia, the moment of inertia evaluated around a particular obvious one-dimensional axis of
rotation where one or both of two symmetry conditions given below are satised. The moment
of inertia of a general object in some coordinate system is more generally described by the moment
of inertia tensor I
ab
. Treating the moment of inertia tensor correctly is beyond the scope of this
course, but math, physics or engineering students are well advised to take a peek at the Wikipedia
article on the moment of inertia
114
to at least get a glimpse of the mathematically more elegant
and correct version of what we are covering here.
Here are the two conditions and the result. Consider a particular pivot point at the origin of
coordinates and right handed rotation around an axis in the ath direction of a coordinate
frame with this origin. Let the plane of rotation be the plane perpendicular to this axis that
contains the pivot/origin. There isnt anything particularly mysterious about this think of the
a = z-axis being the axis of rotation, with positive in the right-handed direction of , and with the
x-y plane being the plane of rotation.
In this coordinate frame, if the mass distribution has:
Mirror symmetry across the axis of rotation and/or
Mirror symmetry across the plane of rotation,
we can write:
L = L
a
= I
aa
a
= I (571)
where =
a
a points in the (right handed) direction of the axis of rotation and where:
I = I
aa
=
i
m
i
r
2
i
or
_
r
2
dm (572)
with r
i
or r the distance from the a-axis of rotation as usual.
Note that mirror symmetry just means that if there is a chunk of mass or point mass in the
rigid object on one side of the axis or plane of rotation, there is an equal chunk of mass or point
mass in the mirror position on the exact opposite of the line or plane, for every bit of mass that
makes up the object. This will be illustrated in the next section below, along with why these rules
are needed.
In other words, the scalar moments of inertia I we evaluated last chapter are just the diagonal
parts of the moment of inertia tensor I = I
aa
for the coordinate direction a corresponding to the
axis of rotation. Since we arent going to do much well, we arent going to do anything with the
non-diagonal parts of I in this course, from now on I will just write the scalar moment I where I
114
Wikipedia: http://www.wikipedia.org/wiki/Moment of inertia#Moment of inertia tensor. This is a link to the
middle of the article and the tensor part, but even introductory students may nd it useful to review the beginning
of this article.
really mean I
aa
for some axis a such that at least one of the two conditions above are satised, but
math/physics/engineering students, at least, should try to remember that it really aint so
115
.
All of the (scalar) Is we computed in the last chapter satised these symmetry conditions:
A ring rotating about an axis through the center perpendicular to the plane of the ring has
both symmetries. So does a disk.
A rod rotating about one end in the plane perpendicular to has mirror symmetry in the
plane but not mirror symmetry across the axis of rotation.
A hollow or lled sphere have both symmetries.
A disk around an axis o to the side (evaluated using the parallel axis theorem) has the plane
symmetry.
A disk around an axis that lies in the plane of the disk with a pivot in the perpendicular plane
through the center of the disk has at least the planar symmetry relative to the perpendicular
plane of rotation.
and so on. Nearly all of the problems we consider in this course will be suciently symmetric that
we can use:
L = I (573)
with the pivot and direction of the rotation and the symmetry of the object with respect to the axis
and/or plane of rotation understood.
Let us take a quick tour, then, of the angular momentum we expect in these cases. A handful
of examples should suce, where I will try to indicate the correct direction as well as show the
understood scalar result.
Example 6.3.1: Angular Momentum of a Point Mass Moving in a Circle
For a point mass moving in a circle of radius r in the x-y plane, we have the planar symmetry.
= z is in the z-direction, and I = I
zz
= mr
2
. The angular momentum in this direction is:
L = L
z
= (r p)
z
= mvr = mr
2
v
2
r
2
= I (574)
The direction of this angular momentum is most easily found by using a variant of the right
hand rule. Let the ngers of your right hand curl around the axis of rotation in the direction of the
motion of the mass. Then your thumb points out the direction. You should verify that this gives
the same result as using

L = r p, always, but this grasp the axis rule is much easier and faster
to use, just grab the axis with your ngers curled in the direction of rotation and your thumb has
got it.
Example 6.3.2: Angular Momentum of a Rod Swinging in a Circle
To compute the angular momentum of a rod rotating in a plane around a pivot through one end,
we choose coordinates such that the rod is in the x-y plane, rotating around z, and has mass M
115
Just FYI, in case you care: The correct rule for computing

L from is
L
a
=
X
b
I
ab
b
for a, b = x, y, z.
M
+x
+y
dm
l
v
z
dL
r
d
r
Figure 80: The geometry of a rod of mass M and length L, rotating around a pivot through the end
in the x-y plane.
and length l (note that it is now tricky to call its length L as thats also the symbol for angular
momentum, sigh). From the previous example, each little point-like bit of mass in the rod dm has
an angular momentum of:
dL
z
= |r d p| = r(dm v) =
_
r
2
dm
_
_
v
r
_
= dI (575)
so that if we integrate this as usual from 0 to l, we get:
|
L| = L
z
=
1
3
Ml
2
= I (576)
Example 6.3.3: Angular Momentum of a Rotating Disk
Suppose a disk is rotating around its center of mass in the x-y plane of the disk. Then using exactly
the same argument as before:
L = L
z
=
_
r
2
dm = I =
1
2
MR
2
(577)
The disk is symmetric, so if we should be rotating it like a spinning coin or poker chip around
(say) the x axis, we can also nd (using the perpendicular axis theorem to nd I
x
):
L = L
x
= I
x
=
1
4
MR
2
(578)
and you begin to see why the direction labels are necessary. A disk has a dierent scalar moment of
inertia about dierent axes through the same pivot point. Even when the symmetry is obvious, we
may still need to label the result or risk confusing the previous two results!
Were not done! If we attach the disk to a massless string and swing it around the z axis at a
distance from the center of mass, we can use the parallel axis theorem and nd that:
L = L
new
z
= I
new
z
(M
2
+
1
2
MR
2
) (579)
Thats three results for a single object, and of course we can apply the parallel axis theorem to
the x-rotation or y-rotation as well! The L = I result works for all of these cases, but the direction
of

L and as well as the value of the scalar moment of inertia I used will vary from case to case,
so you may want to carefully label things just to avoid making mistakes!
Example 6.3.4: Angular Momentum of Rod Sweeping out Cone
Ha! Caught you! This is a rotation that does not satisfy either of our two conditions. As we shall
see below, in this case we cannot write L = I or

L = I they simply are not correct!
6.4: Angular Momentum Conservation
We have derived (trivially) the Law of Conservation of Angular Momentum: When the total external
torque acting on a systems is zero, the total angular momentum of the system is constant, that is,
conserved. As you can imagine, this is a powerful concept we can use to understand many everyday
phenomena and to solve many problems, both very simple conceptual ones and very complex and
dicult ones.
The simplest application of this concept comes, now that we understand well the relationship
between the scalar moment of inertia and the angular momentum, in systems where the moment
of inertia of the system can change over time due to strictly internal forces. We will look at two
particular example problems in this genre, deriving a few very useful results along the way.
Example 6.4.1: The Spinning Professor
D D/2 D/2 D

0 f
Figure 81: A professor stands on a freely pivoted platform at rest (total moment of inertia of
professor and platform I
0
) with two large masses m held horizontally out at the side a distance D
from the axis of rotation, initially rotating with some angular velocity
0
.
A professor stands on a freely pivoted platform at rest with large masses held horizontally out
at the side. A student gives the professor a push to start the platform and professor and masses
rotating around a vertical axis. The professor then pulls the masses in towards the axis of rotation,
reducing their contribution to the total moment of inertia as illustrated in gure 81
If the moment of inertia of the professor and platform is I
0
and the masses m (including the
arms contribution) are held at a distance D from the axis of rotation and the initial angular velocity
is
0
, what is the nal angular velocity of the system
f
when the professor has pulled the masses
in to a distance D/2?
The platform is freely pivoted so it exerts no external torque on the system. Pulling in the
masses exerts no external torque on the system (although it may well exert a torque on the masses
themselves as they transfer angular momentum to the professor). The angular momentum of
the system is thus conserved.
Initially it is (in this highly idealized description)
L
i
= I
i
0
= (2mD
2
+I
0
)
0
(580)
Finally it is:
L
f
= I
f
f
= (2m
_
D
2
_
2
+I
0
)
f
= (2mD
2
+I
0
)
0
= L
i
(581)
Solving for
f
:
f
=
(2mD
2
+I
0
)
(2m
_
D
2
_
2
+I
0
)
0
(582)
From this all sorts of other things can be asked and answered. For example, what is the initial
kinetic energy of the system in terms of the givens? What is the nal? How much work did the
professor do with his or her arms (his is drawn, apologies ladies, but thats supposed to be me
complete with beard and moment of inertia I
0
that is perhaps a bit larger than strictly recommended
for persons my age...)?
Note that this is exactly how ice skaters speed up their spin when performing their various nifty
moves start spinning with arms and legs spread out, then draw them in to spin up, extend them
to slow down again. It is how divers control their rotation. It is how neutron stars spin up as their
parent stars explode. It is part of the way cats manage to always land on their feet for a value of
the world always that really means usually or mostly
116
.
Although there are more general ways of a system of particles altering its own moment of inertia,
a fairly common way is indeed through the application of what we might call radial forces. Radial
forces are a bit special and worth treating in the context of angular momentum conservation in their
own right.
6.4.1: Radial Forces and Angular Momentum Conservation
One of the most important aspects of torque and angular momentum arises because of a curious
feature of two of the most important force laws of nature: gravitation and the electrostatic force.
Both of these force laws are radial, that is, they act along a line connecting two masses or
charges.
Just for grins (and to give you a quick look at them, rst in a long line of glances and repetitions
that will culminate in your knowing them, here is the simple form of the gravitational force on a
point-like object (say, the Moon) being acted on by a second point-like object (say, the Earth)
where for convenience we will locate the Earth at the origin of coordinates:
F
m
= G
M
m
M
e
r
2
r (583)
In this expression, r = r r is the position of the moon in a spherical polar coordinate system (the
direction is actually specied by two angles, neither of which aects the magnitude of the force). G
is called the gravitational constant and this entire formula is a special case of Newtons Law of
Gravitation, currently believed to be a fundamental force law of nature on the basis of considerable
evidence.
A similar expression for the force on a charged particle with charge q located at position r = r r
exerted a charged particle with charge Q located at the origin is known as a (special case of)
Coulombs Law and is also held to be a fundamental force law of nature. It is the force that
binds electrons to nuclei (while making the electrons themselves repel one another) and hence is the
dominant force in all of chemistry it, more than any other force of nature, is us
117
. Coulombs
116
Ive seen some stupid cats land at on their back in my lifetime, and a single counterexample serves to disprove
the absolute rule...
117
Modulated by quantum principles, especially the notion of quantization and the Pauli Exclusion Principle, both
beyond the scope of this course. Pauli is arguably co-equal with Coulomb in determining atomic and molecular
structure.
Law is just:
F
q
= k
e
qQ
r
2
r (584)
where k
e
is once again a constant of nature.
Both of these are radial force laws. If we compute the torque exerted by the Earth on the moon:
m
= r
_
G
M
m
M
e
r
2
_
r = 0 (585)
If we compute the torque exerted by Q on q:
q
= r
_
k
e
qQ
r
2
_
r = 0 (586)
Indeed, for any force law of the form

F(r) = F(r) r the torque exerted by the force is:
= r F(r) r = 0 (587)
and we can conclude that radial forces exert no torque!
In all problems where those radial forces are the only (signicant) forces that act:
A radial force exerts no torque and the angular momentum of the object upon
which the force acts is conserved.
Note that this means that the angular momentum of the Moon in its orbit around the Earth is
constant this will have important consequences as we shall see in two or three weeks. It means
that the electron orbiting the nucleus in a hydrogen atom has a constant angular momentum, at
least as far as classical physics is concerned (so far). It means that if you tie a ball to a rubber band
fastened to a pivot and then throw it so that the band remains stretches and shrinks as it moves
around the pivot, the angular momentum of the ball is conserved. It means that when an exploding
star collapses under the force of gravity to where it becomes a neutron star, a tiny fraction of its
original radius, the angular momentum of the original star is (at least approximately, allowing for
the mass it cast o in the radial explosion) conserved. It means that a mass revolving around a
center on the end of a string of radius r has an angular momentum that is conserved, and that
this angular momentum will remain conserved as the string is slowly pulled in or let out while the
particle orbits.
Lets understand this further using one or two examples.
Example 6.4.2: Mass Orbits On a String
r m
F
v
Figure 82:
A particle of mass m is tied to a string that passes through a hole in a frictionless table and
held. The mass is given a push so that it moves in a circle of radius r at speed v. Here are several
questions that might be asked and their answers:
a) What is the torque exerted on the particle by the string? Will angular momentum be conserved
if the string pulls the particle into orbits with dierent radii?
This is clearly a radial force the string pulls along the vector r from the hole (pivot) to the
mass. Consequently the tension in the string exerts no torque on mass m and its angular
momentum is conserved. It will still be conserved as the string pulls the particle in to a
new orbit.
This question is typically just asked to help remind you of the correct physics, and might well
be omitted if this question were on, say, the nal exam (by which point you are expected to
have gured all of this out).
b) What is the magnitude of the angular momentum L of the particle in the direction of the axis
of rotation (as a function of m, r and v)?
Trivial:
L = |r p| = mvr = mr
2
(v/r) = mr
2
= I (588)
By the time youve done your homework and properly studied the examples, this should be
instantaneous. Note that this is the initial angular momentum, and that from the previous
question angular momentum is conserved! Bear this in mind!
c) Show that the magnitude of the force (the tension in the string) that must be exerted to keep
the particle moving in a circle is:
F = T =
L
2
mr
3
This is a general result for a particle moving in a circle and in no way depends on the fact
that the force is being exerted by a string in particular.
As a general result, we should be able to derive it fairly easily from what we know. We know
two things the particle is moving in a circle with a constant v, so that:
F =
mv
2
r
(589)
We also know that L = mvr from the previous question! All that remains is to do some
algebra magic to convert one to the other. If we had one more factor of m on to, and a
factor of r
2
on top, the top would magically turn into L
2
. However, we are only allowed to
multiply by one, so:
F =
mv
2
r

mr
2
mr
2
=
m
2
v
2
r
2
mr
3
=
L
2
mr
3
(590)
as desired, Q.E.D., all done, fabulous.
d) Show that the kinetic energy of the particle in terms of its angular momentum is:
K =
L
2
2mr
2
More straight up algebra magic of exactly the same sort:
K =
mv
2
2
=
mv
2
2

mr
2
mr
2
=
L
2
2mr
2
(591)
Now, suppose that the radius of the orbit and initial speed are r
i
and v
i
, respectively. From under
the table, the string is slowly pulled down (so that the puck is always moving in an approximately
circular trajectory and the tension in the string remains radial) to where the particle is moving in a
circle of radius r
2
.
e) Find its velocity v
2
using angular momentum conservation.
This should be very easy, and thanks to the results above, it is:
L
1
= mv
1
r
1
= mv
2
r
2
= L
2
(592)
or
v
2
=
r
1
r
2
v
1
(593)
f) Compute the work done by the force from part c) above and identify the answer as the work-
kinetic energy theorem. Use this to to nd the velocity v
2
. You should get the same answer!
Well, what can we do but follow instructions. L and m are constants and we can take them
right out of the integral as soon as they appear. Note that dr points out and

F points in along
r so that:
W =
_
r
2
r
1
Fdr
=
_
r
2
r
1
L
2
mr
3
dr
=
L
2
m
_
r
2
r
1
r
3
dr
=
L
2
m
r
2
2
r
2
r
1
=
L
2
2mr
2
2
L
2
2mr
2
1
= K (594)
Not really so dicult after all.
Note that the last two results are pretty amazing they show that our torque and angular
momentum theory so far is remarkably consistent since two very dierent approaches give the same
answer. Solving this problem now will make it easy later to understand the angular momentum
barrier, the angular kinetic energy term that appears in the radial part of conservation of mechanical
energy in problems involving a central force (such as gravitation and Coulombs Law). This in turn
will make it easy for us to understand certain properties of orbits from their potential energy curves.
The nal application of the Law of Conservation of Angular Momentum, collisions in this text is
too important to be just a subsection it gets its very own topical section, following immediately.
6.5: Collisions
We dont need to dwell too much on the general theory of collisions at this point all of the denitions
of terms and the general methodology we learned in week 4 still hold when we allow for rotations.
The primary dierence is that we can now apply the Law of Conservation of Angular Momentum
as well as the Law of Conservation of Linear Momentum to the actual collision impulse.
In particular, in collisions where no external force acts (in the impulse approximation), no
external torque can act as well. In these collisions both linear momentum and angular momentum
are conserved by the collision. Furthermore, the angular momentum can be computed relative to
any pivot, so one can choose a convenient pivot to simply the algebra involved in solving any given
problem.
v
m m
M
M
Figure 83: In the collision above, no physical pivot exist and hence no external force or torque is
exerted during the collision. In collisions of this sort both momentum and angular momentum
about any pivot chosen are conserved.
This is illustrated in gure 83 above, where a small disk collides with a bar, both sitting (we
imagine) on a frictionless table so that there is no net external force or torque acting. Both momen-
tum and angular momentum are conserved in this collision. The most convenient pivot for problems
of this sort is usually the center of mass of the bar, or possibly the center of mass of the system at
the instant of collision (which continues moving a the constant speed of the center of mass before
the collision, of course).
All of the terminology developed to describe the energetics of dierent collisions still holds when
we consider conservation of angular momentum in addition to conservation of linear momentum.
Thus we can speak of elastic collisions where kinetic energy is conserved during the collision, and
partially or fully inelastic collisions where it is not, with fully inelastic as usual being a collision
where the systems collide and stick together (so that they have the same velocity of and angular
velocity around the center of mass after the collision).
M
v
m m
M
pivot
Figure 84: In the collision above, a physical pivot exists the bar has a hinge at one end that
prevents its linear motion while permitting the bar to swing freely. In collisions of this sort linear
momentum is not conserved, but since the pivot force exerts no torque about the pivot,
angular momentum about the pivot is conserved.
We do, however, have a new class of collision that can occur, illustrated in gure 84, one where
the angular momentum is conserved but linear momentum is not. This can and in general
will occur when a system experiences a collision where a certain point in the system is physically
pivoted by means of a nail, an axle, a hinge so that during the collision an unknown force
118
is
exerted there as an extra external impulse acting on the system. This impulse acting at the pivot
exerts no external torque around the pivot so angular momentum relative to the pivot is
conserved but linear momentum is, alas, not conserved in these collisions.
It is extremely important for you to be able to analyze any given problem to identify the conserved
quantities. To help you out, Ive made up a a wee collision type table, where you can look for the
term elastic in the problem if it isnt explicitly there, by default it is at least partially inelastic
unless/until proven otherwise during the solution and also look to see if there is a pivot force that
again by default prevents momentum from being conserved unless/until proven otherwise during the
solution.
Pivot Force No Pivot Force
Elastic K,

L conserved K,

L and

P conserved.
Inelastic

L conserved

L and

P conserved.
Table 4: Table to help you categorize a collision problem so that you can use the correct conservation
laws to try to solve it. Note that you can get over half the credit for any given problem simply by
correctly identifying the conserved quantities even if you then completely screw up the algebra.
The best way to come to understand this table (and how to proceed to add angular momentum
conservation to your repertoire of tricks for analyzing collisions) is by considering the following
examples. Im only doing part of the work of solving them here, so you can experience the joy of
solving them the rest of the way and learning how it all goes for homework.
Well start with the easiest collisions of this sort to solve fully inelastic collisions.
Example 6.5.1: Fully Inelastic Collision of Ball of Putty with a Free Rod
M
M
m
m
v
0
f
v f
L
cm
x
Figure 85: A blob of putty of mass m, travelling at initial velocity v
0
to the right, strikes an unpivoted
rod of mass M and length L at the end and sticks to it. No friction or external forces act on the
system.
In gure 85 a blob of putty of mass m strikes a stationary rod of mass M at one end and sticks.
The putty and rod recoil together, rotating around their mutual center of mass. Everything is in a
vacuum in a space station or on a frictionless table or something like that in any event there are
no other forces acting during the collision or we ignore them in the impulse approximation.
118
Often we can actually evaluate at least the impulse imparted by such a pivot during the collision it is unknown
in that it is usually not given as part of the initial data.
First we have to gure out the physics. We mentally examine our table of possible collision types.
There is no pivot, so there are no relevant external forces. No external force, no external torque,
so both momentum and angular momentum are conserved by this collision. However, it is a
fully inelastic collision so that kinetic energy is (maximally) not conserved.
Typical questions are:
Where is the center of mass at the time of the collision (what is x
cm
)?
What is v
f
, the speed of the center of mass after the collision? Note that if we know the
answer to these two questions, we actually know x
cm
(t) for all future times!
What is
f
, the nal angular velocity of rotation around the center of mass? If we know this,
we also know (t) and hence can precisely locate every bit of mass in the system for all times
after the collision.
How much kinetic energy is lost in the collision, and where does it go?
Well answer these very systematically, in this order. Note well that for each answer, the physics
knowledge required is pretty simple and well within your reach its just that there are a lot of
parts to patiently wade through.
To nd x
cm
:
(M +m)x
cm
= M
L
2
+mL (595)
or
x
cm
=
M/2 +m
M +m
L (596)
where Im taking it as obvious that the center of mass of the rod itself is at L/2.
To nd v
f
, we note that momentum is conserved (and also recall that the answer is going to be
v
cm
:
p
i
= mv
0
= (M +m)v
f
= p
f
(597)
or
v
f
= v
cm
=
m
M +m
v
0
(598)
To nd
f
, we note that angular momentum is going to be conserved. This is where we have
to start to actually think a bit Im hoping that the previous two solutions are really easy for you
at this point as weve seen each one (and worked through them in detail) at least a half dozen to a
dozen times on homework and examples in class and in this book.
First of all, the good news. The rotation of ball and rod before and after the collision all happens
in the plane of rotation, so we dont have to mess with anything but scalar moments of inertia and
L = I. Then, the bad news: We have to choose a pivot since none was provided for us. The answer
will be the same no matter which pivot you choose, but the algebra required to nd the answer may
be quite dierent (and more dicult for some choices).
Lets think for a bit. We know the standard scalar moment of inertia of the rod (which applies
in this case) around two points the end or the middle/center of mass. However, the nal rotation
is around not the center of mass of the rod but the center of mass of the system, as the center of
mass of the system itself moves in a completely straight line throughout.
Of course, the angular velocity is the same regardless of our choice of pivot. We could choose
the end of the rod, the center of the rod, or the center of mass of the system and in all cases the
nal angular momentum will be the same, but unless we choose the center of mass of the system to
be our pivot we will have to deal with the fact that our nal angular momentum will have both a
translational and a rotational piece.
This suggests that our best choice is to choose x
cm
as our pivot, eliminating the translational
angular momentum altogether, and that is how we will proceed. However, Im also going to solve
this problem using the upper end of the rod at the instant of the collision as a pivot, because Im
quite certain that no student reading this yet understands what I mean about the translational
component of the angular momentum!
Using x
cm
:
We must compute the initial angular momentum of the system before the collision. This is just
the angular momentum of the incoming blob of putty at the instant of collision as the rod is at rest.
L
i
= |r p| = mv
0
r
= mv
0
(L x
cm
) (599)
Note that the moment arm of the angular momentum of the mass m in this frame is just the
perpendicular minimum distance from the pivot to the line of motion of m, L x
cm
.
This must equal the nal angular momentum of the system. This is easy enough to write down:
L
i
= mv
0
(L x
cm
) = I
f
f
= L
f
(600)
where I
f
is the moment of inertia of the entire rotating system about the x
cm
pivot!
Note well: The advantage of using this frame with the pivot at x
cm
at the instant of collision
(or any other frame with the pivot on the straight line of motion of x
cm
) is that in this frame the
angular momentum of the system treated as a mass at the center of mass is zero. We
only have a rotational part of

L in any of these coordinate frames, not a rotational and translational
part. This makes the algebra (in my opinion) very slightly simpler in this frame than in, say,
the frame with a pivot at the end of the rod/origin illustrated next, although the algebra in the the
frame with pivot at the origin almost instantly corrects itself and gives us the center of mass pivot
result.
This now reveals the only point where we have to do real work in this frame (or any other)
nding I
f
around the center of mass! Lots of opportunities to make mistakes, a need to use Our
Friend, the Parallel Axis Theorem, alarums and excursions galore. However, if you have clearly
stated L
i
= L
f
, and correctly represented them as in the equation above, you have little to fear
you might lose a point if you screw up the evaluation of I
f
, you might even lose two or three, but
thats out of 10 to 25 points total for the problem youre already way up there as far as your
demonstrated knowledge of physics is concerned!
So lets give it a try. The total moment of intertia is the moment of inertia of the rod around the
new (parallel) axis through x
cm
plus the moment of inertia of the blob of putty as a point mass
stuck on at the end. Sounds like a job for the Parallel Axis Theorem!
I
f
=
1
12
ML
2
+M(x
cm
L/2)
2
+m(L x
cm
)
2
(601)
Now be honest; this isnt really that hard to write down, is it?
Of course the mess occurs when we substitute this back into the conservation of momentum
equation and solve for
f
:
f
=
L
i
I
f
=
mv
0
(L x
cm
)
1
12
ML
2
+M(x
cm
L/2)
2
+m(L x
cm
)
2
(602)
One could possible square out everything in the denominator and simplify this, but why would
one want to? If we know the actual numerical values of m, M, L, and v
0
, we can compute (in order)
x
cm
, I
f
and
f
as easily from this expression as from any other, and this expression actually means
something and can be checked at a glance by your instructors. Your instructors would have to work
just as hard as you would to reduce it to minimal terms, and are just as averse to doing pointless
work.
Thats not to say that one should never multiply things out and simplify, only that it seems
unreasonable to count doing so as being part of the physics of the answer, and all we really care
about is the physics! As a rule in this course, if you are a math, physics, or engineering major I
expect you to go the extra mile and nish o the algebra, but if you are a life science major who came
into the course terried of anything involving algebra, well, Im proud of you already because by
this point in the course you have no doubt gotten much better at math and have started to overcome
your fears there is no need to charge you points for wading through stu I could make a mistake
doing almost as easily as you could. If anything, well give you extra points if you try it and succeed
after giving us something clear and correct to grade for primary credit rst!
Finally, we do need to compute the kinetic energy lost in the collision:
K = K
f
K
i
=
L
2
f
2I
f
+
1
2
(m+M)v
2
f

1
2
mv
2
0
(603)
is as easy a form as any. Here there may be some point to squaring everything out to simplify, as
one expects an answer that should be some fraction of K
i
, and the value of the fraction might be
interesting. Again, if you are a physics major you should probably do the full simplication just for
practice doing lots of tedious algebra without fear, useful self-discipline. Everybody else that does
it will likely get extra credit unless the problem explicitly calls for it.
Now, lets do the whole thing over, using a dierent pivot, and see where things are the same
and where they are dierent.
Using the end of the rod:
Obviously there is no change in the computation of x
cm
and v
f
indeed, we really did these in
the (given) coordinate frame starting at the end of the rod anyway thats the lab frame drawn
into our gure and the one wherein our answer is nally expressed. All we need to do, then, is
compute our angular momenta relative to an origin/pivot at the end of the rod:
L
i
= |r p| = r
mv
0
= mv
0
L (604)
and:
L
f
= (m+M)v
f
x
cm
+I
f
f
(605)
In this nal expression, (m+M)v
f
x
cm
is the angular momentum of the entire system treated as a
mass moving at speed v
f
located at x
cm
right after the collision, plus the angular momentum of the
system around the center of mass, which must be computed exactly as before, same I
f
, same
f
(to
be found). Thus:
I
f
f
= mv
0
L (m+M)v
f
x
cm
(606)
Here is a case where one really must do a bit more simplication there are just too many things
that depend on the initial conditions. If we substitute in v
f
from above, in particular, we get:
I
f
f
= mv
0
L mv
0
x
cm
= mv
0
(L x
cm
) (607)
and:
f
=
mv
0
(L x
cm
)
I
f
=
mv
0
(L x
cm
)
1
12
ML
2
+M(x
cm
L/2)
2
+m(L x
cm
)
2
(608)
as before. The algebra somehow manages the frame change for us, giving us an answer that doesnt
depend on the particular choice of frame once we account for the angular momentum of the center of
mass in any frame with a pivot that isnt on the line of motion of x
cm
(where it is zero). Obviously,
computing K is the same, and so we are done!. Same answer, two dierent frames!
m
v
0
m
M
M
f
L
pivot
Figure 86: A blob of putty of mass m travelling at speed v
0
strikes the rod of mass M and length
L at the end and sticks. The rod, however, is pivoted about the other end on a frictionless nail or
hinge.
Example 6.5.2: Fully Inelastic Collision of Ball of Putty with Pivoted Rod
In gure 86 we see the alternative version of the fully inelastic collision between a pivoted rod and a
blob of putty. Let us consider the answers to the questions in the previous problem. Some of them
will either be exactly the same or in some sense irrelevant in the case of a pivoted rod, but either
way we need to understand that.
First, however, the physics! Without the physics we wither and die! There is a pivot, and
during the collision the pivot exerts a large and unknown pivot force on the rod
119
and this force
cannot be ignored in the impulse approximation. Consequently, linear momentum is not
conserved!
It is obviously an inelastic collision, so kinetic energy is not conserved.
The force exerted by the physical hinge or nail may be unknown and large, but if we make the
hinge the pivot for the purposes of computing torque and angular momentum, this force exerts
no torque on the system! Consequently, for this choice of pivot only, angular momentum is
conserved.
In a sense, this makes this problem much simpler than the last one! We have only one physical
principle to work with (plus our denitions of e.g. center of mass), and all of the other answers must
be derivable from this one thing. So we might as well get to work:
L
i
= I
0
0
= mL
2
v
0
L
= (
1
3
ML
2
+mL
2
)
f
= I
f
f
= L
f
(609)
where I used L
f
= I
f
f
and inserted the scalar moment of inertial I
f
by inspection, as I know the
moment of inertia of a rod about its end as well as the moment of inertia of a point mass a distance
L from the pivot axis. Thus:
f
=
mv
0
L
(
1
3
M +m)L
2
=
m
(
1
3
M +m)
v
0
L
=
m
(
1
3
M +m)
0
(610)
where Ive written it in the latter form (in terms of the initial angular velocity of the blob of putty
relative to this pivot) both to make the correctness of the units manifest and to illustrate how
119
Unless the mass strikes the rod at a particular point called the center of percussion of the rod, such that the
velocity of the center of mass right after the collision is exactly the same as that of the free rod found above...
conceptually simple the answer is:
f
=
I
0
I
f
0
(611)
It is now straightforward to answer any other questions that might be asked. The center of mass
is still a distance:
x
cm
=
m+
1
2
M
m+M
L (612)
from the pivot, but now it moves in a circular arc after the collision, not in a straight line.
The velocity of the center of mass after the collision is determined from
f
:
v
f
=
f
x
cm
=
m
(
1
3
M +m)
v
0
L

m+
1
2
M
m+M
L =
m(m+
1
2
M)
(m+M)(
1
3
M +m)
v
0
(613)
The kinetic energy lost in the collision is:
K = K
f
K
i
=
L
2
f
2I
f
1
2
mv
2
0
(614)
(which can be simplied, but the simplication is left as an exercise for everybody it isnt dicult).
One can even compute the impulse provided by the pivot hinge during the collision:
I
hinge
= p = p
f
p
i
= (m+M)v
f
mv
0
(615)
using v
f
from above. (Note well that I have to reuse symbols such as I, in the same problem sorry
in this context it clearly means impulse and not moment of inertia.)
6.5.1: More General Collisions
As you can imagine, problems can get to be somewhat more dicult than the previous two examples
in several ways. For one, instead of collisions between point masses that stick and rods (pivoted or
not) one can have collisions between point masses and rods where the masses do not stick. This
doesnt change the basic physics. Either the problem will specify that the collision is elastic (so
K
tot
is conserved) or it will specify something like v
f
for the point mass so that you can compute
K and possibly p or L (depending on what is conserved), much as you did for bullet-passes-
through-block problems in week 4.
Instead of point mass and rod at all you could be given a point mass and a disk or ball that can
rotate, or even a collision between two disks. The algebra of things like this will be identical to the
algebra above except that one will have to substitute e.g. the moment of inertia of a disk, or ball,
or whatever for the moment of inertia of the rod, pivoted or free. The general method of solution
will therefore be the same. You have several homework problems where you can work through this
method on your own and working in your groups make sure that you are comfortable with this
before the quiz.
Angular momentum isnt just conserved in the case of symmetric objects rotating, but these are
by far the easiest for us to treat. We now need to tackle the various diculties associated with the
rotation of asymmetric rigid objects, and then move on to nally and irrevocably understand how
torque and angular momentum are vector quantities and that this matters.
6.6: Angular Momentum of an Asymmetric Rotating Rigid
Object
Consider the single particle in gure 87 that moves in a simple circle of radius r sin() in a plane above
the x-y plane! The axis of rotation of the particle (the direction of the rotation we considered in
m
L
r
v
z
x
y
Figure 87: A point mass m at the end of a massless rod that makes a vector r from the origin to
the location of the mass, moving at constant speed v sweeps out a circular path of radius r sin()
in a plane above the (point) pivot. The angular momentum of this mass is (at the instant shown)
L = rmv =r p as shown. As the particle sweeps out a circle, so does

L! The extended massless
rigid rod exerts a constantly changing/precessing torque on the mass in order to accomplish this.
week 5 is clearly = z.
Note well that the mass distribution of this rigid object rotation violates both of the symmetry
rules above. It is not symmetric across the axis of rotation, nor is it symmetric across the plane of
rotation. Consequently, according to our fundamental denition of the vector angular momentum:
L = r p = r mv (616)
which points up and to the left at the instant shown in gure 87.
Note well that

L is perpendicular to both the plane containing r and v, and that as the mass
moves around in a circle, so does

L! In fact the vector

L sweeps out a cone, just as the vector
r does. Finally, note that the magnitude of

L has the constant value:
L = |r v| = mvr (617)
because r and v are mutually perpendicular.
This means, of course, that although L = |
L| is constant,

L is constantly changing in time. Also,
we know that the time rate of change of

L is , so the rod must be exerting a nonzero torque on
the mass! Finally, the scalar moment of inertia I = I
zz
= mr
2
sin
2
() for this rotation is a constant
(and so is ) manifestly

L = I ! They dont even point in the same direction!
Consider the following physics. We know that the actual magnitude and direction the force
acting on m at the instant drawn is precisely F
c
= mv
2
/(r sin() (in towards the axis of rotation)
because the mass m is moving in a circle. This force must be exerted by the massless rod because
there is nothing else touching the mass (and we are neglecting gravity, drag, and all that). In turn,
this force must be transmitted by the rod back to a bearing of some sort located at the origin, that
keeps the rod from twisting out to rotate the mass in the same plane as the pivot (its natural
state of rigid rotation).
The rod exerts a torque on the mass of magnitude:
rod
= |r

F
c
| = r cos()F
c
= mv
2
cos()
sin()
= m
2
r
2
sin() cos() (618)
Now, lets see how this compares to the total change in angular momentum per unit time. Note
that the magnitude of

L, L, does not change in time, nor does L
z
, the component parallel to the
z-axis. Only the component in the x-y plane changes, and that components sweeps out a circle!
The radius of the circle is L
= Lcos() (from examining the various right triangles in the gure)

and hence the total change in

L in one revolution is:
L = 2L
= 2Lcos() (619)
This change occurs in a time interval t = T, the period of rotation of the mass m. The period of
rotation of m is the distance it travels (circumference of the circle of motion) divided by its speed:
T =
2r sin()
v
(620)
Thus the magnitude of the torque exerted over t = T is (using L = mvr as well):
L
t
= 2Lcos()
v
2r sin()
= mv
2
cos()
sin()
= m
2
r
2
sin() cos() (621)
so that indeed,
rod
=
L
t
(622)
for the cycle of motion.
The rod must indeed exert a constantly changing torque on the rod, a torque that remains
perpendicular to the angular momentum vector at all times. The particle itself, the angular
momentum, and the torque acting on the angular momentum all precess around the z-axis with a
period of revolution of T and clearly at no time is it true that

L = I for any scalar I and constant
.
m
v
z
x
y
v
r
m
L L
r
L
tot
m
v
z
x
y
r
v
m
L L
r
L
tot
Figure 88: When the two masses have mirror symmetry across the axis of rotation, their
total angular momentum

L does line up with . When the two masses have mirror symmetry
across the plane of rotation, their total angular momentum

L also lines up with .
Notice how things change if we balance the mass with a second one on an opposing rod as drawn
in gure 88, making the distribution mirror symmetric across the axis of rotation. Now each
of the two masses has a torque acting on it due to the rod connecting it with the origin, each mass
has a vector angular momentum that at right angles to both r and v, but the components of

L in
the x-y plane phcancel so that the total angular momentum once again lines up with the z-axis!
The same thing happens if we add a second mass at the mirror-symmetric position below the
plane of rotation as shown in the second panel of gure 88. In this case as well the components of
L in the x-y plane cancel while the z components add, producing a total vector angular momentum
that points in the z-direction, parallel to .
The two ways of balancing a mass point around a pivot are not quite equivalent. In the rst case,
the pivot axis passes through the center of mass of the system, and the rotation can be maintained
without any external force as well as torque. In the second case, however, the center of mass of the
system itself is moving in a circle (in the plane of rotation). Consequently, while no net external
torque is required to maintain the motion, there is a net external force required to maintain the
motion. We will dierentiate between these two cases below in an everyday example where they
matter.
This is why I at least tried to be careful to assert throughout week 5) that the mass distributions
for the one dimensional rotations we considered were suciently symmetric. Suciently, as you
should now be able to see and understand, means mirror symmetric across the axis of rotation (best,
zero external force or torque required to maintain rotation)) or plane of rotation (sucient, but need
external force to maintain motion of the center of mass in a circle). Only in these two cases is the
total angular momentum

L is parallel to such that

L = I for a suitable scalar I.
Example 6.6.1: Rotating Your Tires
tire
bearings
axle
mass excess
mass excess
bearing wear bearing wear
Figure 89: Three tires viewed in cross section. The rst one is perfectly symmetric and balanced.
The second one has a static imbalance one side is literally more massive than the other. It will
stress the bearings as it rotates as the bearings have to exert a dierential centripetal force on the
more massive side. The third is dynamically imbalanced it has a non-planar mass assymetry
and the bearings will have to exert a constantly precessing torque on the tire. Both of the latter
situations will make the drive train noisy, the car more dicult and dangerous to drive, and will
wear your bearings and tires out much faster.
This is why you should regularly rotate your tires and keep them well-balanced. A perfect tire
is one that is precisely cylindrically symmetric. If we view it from the side it has a uniform mass
distribution that has both mirror symmetry across the axis of rotation and mirror symmetry across
the plane of rotation. If we mount such a tire on a frictionless bearing, no particular side will be
heavier than any other and therefore be more likely to rotate down towards the ground. If we spin it
on a frictionless axis, it will spin perfectly symmetrically as the bearings will not have to exert any
precessing torque or time-varying force on it of the sort exerted by the massless rod in gure
87.
For a variety of reasons uneven wear, manufacturing variations, accidents of the road tires
(and the hubs they are mounted on) rarely stay in such a perfect state for the lifetime of either tire
or car. Two particular kinds of imbalance can occur. In gure 89 three tires are viewed in cross-
section. The rst is our mythical brand new perfect tire, one that is both statically and dynamically
balanced.
The second is a tire that is statically imbalanced it has mirror symmetry across the plane
of rotation but not across the axis of rotation. One side has thicker tread than the other (and
would tend to rotate down if the tire were elevated and allowed to spin freely). When a statically
imbalanced tire rotates while driving, the center of mass of the tire moves in a circle around the
axle and the bearings on the opposite side from the increased mass are anomalously compressed in
order to provide the required centripetal force. The car bearings will wear faster than they should,
and the car will have an annoying vibration and make a wubba-wubba noise as you drive (the latter
can occur for many reasons but this is one of them).
The third is a tire that is dynamically imbalanced. The surplus masses shown are balanced
well enough from left to right neither side would roll down as in static imbalance, but the mass
distribution does not have mirror symmetry across the axis of rotation nor does it have mirror
symmetry across the plane of rotation through the pivot. Like the unbalanced mass sweeping out a
cone, the bearings have to exert a dynamically changing torque on the tires as they rotate because
their angular momentum is not parallel to the axis of rotation. At the instant shown, the bearings
are stressed in two places (to exert a net torque on the hub out of the page if the direction of is
up as drawn).
The solution to the problem of tire imbalance is simple rotate your tires (to maintain even
wear) and have your tires regularly balanced by adding compensatory weights on the light side of
a static imbalance and to restore relative cylindrical symmetry for dynamical imbalance, the way
adding a second mass did to our single mass sweeping out a cone.
I should point out that there are other ways to balance a rotating rigid object, and that every
rigid object, no matter how its mass is distributed, has at least certain axes through the center of
mass that can diagonalize the moment of inertia with respect to those axes. These are the axes
that you can spin the object about and it will rotate freely without any application of an outside
force or torque. Sadly, though, this is beyond the scope of this course
120
At this point you should understand how easy it is to evaluate the angular momentum of sym-
metric rotating rigid objects (given their moment of inertia) using L = I, and how very dicult
it can be to manage the angular momentum in the cases where the mass distribution is asymmetric
and unbalanced. In the latter case we will usually nd that the angular momentum vector will
precess around the axis of rotation, necessitating the application of a continuous torque to maintain
the (somewhat unnatural) motion.
There is one other very important context where precession occurs, and that is when a symmetric
rigid body is rapidly rotating and has a large angular momentum, and a torque is applied to it in
just the right way. This is one of the most important problems we will learn to solve this week,
one essential for everybody to know, future physicians, physicists, mathematicians, engineers: The
Precession of a Top (or other symmetric rotator).
6.7: Precession of a Top
Nowhere is the vector character of torque and angular momentum more clearly demonstrated than
in the phenomenon of precession of a top, a spinning proton, or the Earth itself. This is also an
important problem to clearly and quantitatively understand even in this introductory course because
it is the basis of Magnetic Resonance Imaging (MRI) in medicine, the basis of understanding
quantum phenomena ranging from spin resonance to resonant emission from two-level atoms for
physicists, and the basis for gyroscopes to the engineer. Evvybody need to know it, in other words,
no fair hiding behind the sputtered but I dont need to know this crap weasel-squirm all too often
uttered by frustrated students.
Look, Ill bribe you. This is one of those topics/problems that I guarantee will be on at least
one quiz, hour exam, or the nal this semester. That is, mastering it will be worth at least
ten points of your total credit, and in most years it is more likely to be thirty or even fty points.
120
Yes, I know, I know this was a joke! I know that you arent, in fact, terribly sad about this...;-)
R
M
D
Mg
Figure 90:
Its that important! If you master it now, then understanding the precession of a proton around
a magnetic eld will be a breeze next semester. Otherwise, you risk the additional 10-50 points it
might be worth next semester.
If you are a sensible person, then, you will recognize that Ive just made it worth your while to
invest the time required to completely understand precession in terms of vector torque, and to be
able to derive the angular frequency of precession,
p
which is our goal. Ill show you three ways
to do it, dont worry, and any of the three will be acceptable (although I prefer that you use the
second or third as the rst is a bit too simple, it gets the right answer but doesnt give you a good
feel for what happens if the forces that produce the torque change in time).
First, though, lets understand the phenonenon. If gure ?? above, a simple top is shown spinning
at some angular velocity (not to be confused with
p
, the precession frequency). We will idealize
this particular top as a massive disk with mass M, radius R, spinning around a rigid massless spindle
that is resting on the ground, tipped at an angle with respect to the vertical.
We begin by noting that this top is symmetric, so we can easily compute the magnitude and
direction of its angular momentum:
L = |
L| = I =
1
2
MR
2
(623)
Using the grasp the axis version of the right hand rule, we see that in the example portrayed this
angular momentum points in the direction from the pivot at the point of contact between the spindle
and the ground and the center of mass of the disk along the axis of rotation.
Second, we note that there is a net torque exerted on the top relative to this spindle-ground
contact point pivot due to gravity. There is no torque, of course, from the normal force that holds
up the top, and we are assuming the spindle and ground are frictionless. This torque is a vector:
=

D(Mg z) (624)
or
= MgDsin() (625)
into the page as drawn above, where z is vertical.
Third we note that the torque will change the angular momentum by displacing it into the page
in the direction of the torque. But as it does so, the plane containing the

D and Mg z will be
rotated a tiny bit around the z (precession) axis, and the torque will also shift its direction to
remain perpendicular to this plane. It will shift

L a bit more, which shifts a bit more and so on.
In the end

L will precess around z, with precessing as well, always /2 ahead .
Since

L, the magnitude of

L does not change, only the direction.

L sweeps out a cone,
exactly like the cone swept out in the unbalanced rotation problems above and we can use similar
considerations to relate the magnitude of the torque (known above) to the change of angular mo-
mentum per period. This is the simplest (and least accurate) way to nd the precession frequency.
Lets start by giving this a try:
p
From L/t (Average)
We already derived above that
avg
= = MgDsin() (626)
is the magnitude of the torque at all points in the precession cycle, and hence is also the average of
the magnitude of the torque over a precession cycle (as opposed to the average of the vector torque
over a cycle, which is obviously zero).
We now compute the average torque algebraically from L/t (average) and set it equal to the
computed torque above. That is:
L
cycle
= 2L
= 2Lsin() (627)
and:
t
cycle
= T =
2
p
(628)
where
p
is the (desired) precession frequency, or:
avg
= MgDsin() =
L
cycle
t
cycle
=
p
Lsin() (629)
We now solve the the precession frequency
p
:
p
=
MgD
L
=
MgD
I
=
2gD
R
2
(630)
Note well that the precession frequencey is independent of this is extremely important next
semester when you study the precession of spinning charged particles around an applied magnetic
eld, the basis of Magnetic Resonance Imaging (MRI).
p
from L and t Separately
Simple and accurate as it is, the previous derivation has a few issues and hence it is not my favorite
one; averaging in this way doesnt give you the most insight into whats going on and doesnt help
you get a good feel for the calculus of it all. This matters in MRI, where the magnetic eld varies
in time, although it is a bit more dicult to make gravity vary in a similar way so it doesnt matter
so much this semester.
Nevertheless, to get you o on the right foot, so to speak, for E&M
121
, lets do a second derivation
that is in between the very crude averaging up above and a rigorous application of calculus to the
problem that we cant even understand properly until we reach the week where we cover oscillation.
Lets repeat the general idea of the previous derivation, only instead of setting equal to the
average change in

L per unit time, we will set it equal to the instantaneous change in

L per unit
time, writing everything in terms of very small (but nite) intervals and then taking the appropriate
limits.
121
Electricity and Magnetism
L
z
L
L
z
y
x
L
y
x
L = L
L
in
= t
Figure 91: The cone swept out by the precession of the angular momentum vector,

L, as well as an
overhead view of the trajectory of

L
, the component of

L perpendicular to the z-axis.
To do this, we need to picture how

L changes in time. Note well that at any given instant,
is perpendicular to the plane containing y (the direction of the gravitational force) and

L. This
direction is thus always perpendicular to both

L and Mg z and cannot change the magnitude
of

L or its z component L
z
. Over a very short time t, the change in

L is thus
L in the
plane perpendicular to z. As the angular momentum changes direction only into the direction,
the direction also changes to remain perpendicular. This should remind you have our long-ago
discussion of the kinematics of circular motion

L sweeps out a cone around the z-axis where L
z
and the magnitude of L remain constant.
L
sweeps out a circle as we saw in the previous example, and we can visualize both the cone
swept out by

L and the change over a short time t,
L, in gure 91. We can see from the gure

that:
L = L
= t (631)
where is the angle the angular momentum vector precesses through in time t. We substitute
L
= Lsin() and = MgDsin() as before, and get:

Lsin() = MgDsin() t (632)
Finally we solve for:
p
=
d
dt
= lim
t0
=
MgD
L
=
2gD
R
2
(633)
as before. Note well that because this time we could take the limit as t 0, we get an expression
that is good at any instant in time, even if the top is in a rocket ship (an accelerating frame) and
g g
is varying in time!
This still isnt the most elegant approach. The best approach, although it does use some real
calculus, is to just write down the equation of motion for the system as dierential equations and
solve them for both

L(t) and for
p
.
p
from Calculus
Way back at the beginning of this section we wrote down Newtons Second Law for the rotation of
the gyroscope directly:
=

D(Mg z) (634)
Because Mg z points only in the negative z-direction and
D = D
L
L
(635)
because

L is parallel to

D, for a general

L = L
x
x+L
y
y we get precisely two terms out of the cross
product:
dL
x
dt
=
x
= MgDsin() =
MgDL
y
L
(636)
dL
y
dt
=
y
= MgDsin() =
MgDL
x
L
(637)
or
dL
x
dt
=
MgD
L
L
y
(638)
dL
y
dt
=
MgD
L
L
x
(639)
If we dierentiate the rst expression and substitute the second into the rst (and vice versa)
we transform this pair of coupled rst order dierential equations for L
x
and L
y
into the following
pair of second order dierential equations:
d
2
L
x
dt
2
=
_
MgD
L
_
2
L
x
=
2
p
L
x
(640)
d
2
L
y
dt
2
=
_
MgD
L
_
2
L
y
=
2
p
L
y
(641)
These (either one) we will learn to recognize as the dierential equation of motion for the simple
harmonic oscillator. A particular solution of interest (that satises the rst order equations above)
might be:
L
x
(t) = L
x0
cos(
p
t) (642)
L
x
(t) = L
x0
sin(
p
t) (643)
L
z
(t) = L
z0
(644)
which is then the exact solution to the equation of motion for

L(t) that describes the actual cone
being swept out, with no hand-waving or limit taking required.
The only catch to this approach is, of course, that we dont know how to solve the equation of
motion yet, and the very phrase second order dierential equation strikes terror into our hearts
in spite of the fact that weve been solving one after another since week 1 in this class!
All of the equations of motion we have solved from Newtons Second Law have been second order
ones, after all it is just that the ones for constant acceleration were directly integrable where this
set is not, at least not easily.
It is pretty easy to solve for all of that, but we will postpone the actual solution until later. In
the meantime, remember, you must know how to reproduce one of the three derivations above for
p
, the angular precession frequency, for at least one quiz, test, or hour exam. Not to mention a
homework problem, below. Be sure that you master this because precession is important.
One last suggestion before we move on to treat angular collisions. Most students have a lot
of experience with pushes and pulls, and so far it has been pretty easy to come up with everyday
experiences of force, energy, one dimensional torque and rolling, circular motion, and all that. Its
not so easy to come up with everyday experiences involving vector torque and precession. Yes, may
of you played with tops when you were kids, yes, nearly everybody rode bicycles and balancing and
steering a bike involves torque, but you havent really felt it knowing what was going on.
The only device likely to help you to personally experience torque with your own two hands is
the bicycle wheel with handles and the string that was demonstrated in class. I urge you to take
a turn spinning this wheel and trying to turn it by means of its handles while it is spinning,
to spin it and suspend it by the rope attached to one handle and watch it precess. Get to where
you can predict the direction of precession given the direction of the spin and the handle the rope is
attached to, get so you have experience of pulling it (say) in and out and feeling the handles deect
up and down or vice versa. Only thus can you feel the nasty old cross product in both the torque
and the angular momentum, and only thus can you come to understand torque with your gut as
well as your head.
Homework for Week 6
Problem 1.
Problem 2.
M
R v
f
m
Angular Momentum Conservation
Inelastic Collisions
Satchmo, a dog with mass m runs and jumps onto the edge of a merry-go-round (that is initially
at rest) and then sits down there to take a ride as it spins. The merry-go-round can be thought of
as a disk of radius R and mass M, and has approximately frictionless bearings in its axle. At the
time of this angular collision Satchmo is travelling at speed v perpendicular to the radius of the
merry-go-round.
a) What is the angular velocity
f
of the merry-go-round (and Satchmo) right after the collision?
b) How much of Satchmos initial energy was lost in the collision? (Believe me, no matter what
hes lost it isnt enough hes a border collie and he has plenty more!)
Problem 3.
M.R
p
D
Vector Torque
Vector Angular Momentum
Geometry of Precession
A top is made of a disk of radius R and mass M with a very thin, light nail (r R and m M)
for a spindle so that the disk is a distance D from the tip. The top is spun with a large angular
velocity . When the top is spinning at a small angle with the vertical (as shown) what is the
angular frequency
p
of the tops precession? Note that this is a required problem that will be on
at least one test in one form or another, so be sure that you have mastered it when you are done
with the homework!
Problem 4.
v
m
d
L
M
Impulse
so please review them before you begin. You may also nd it useful to read: Wikipedia: http://www.wikipedia.org/wiki/Center
A rod of mass M and length L rests on a frictionless table and is pivoted on a frictionless nail at
one end as shown. A blob of putty of mass m approaches with velocity v from the left and strikes
the rod a distance d from the end as shown, sticking to the rod.
Find the angular velocity of the system about the nail after the collision.
Is the linear momentum of the rod/blob system conserved in this collision for a general value
of d? If not, why not?
Is there a value of d for which it is conserved? If there were such a value, it would be called
the center of percussion for the rod for this sort of collision.
All answers should be in terms of M, m, L, v and d as needed. Note well that you should clearly
indicate what physical principles you are using to solve this problem at the beginning of the work.
Problem 5.
r m
F
v
Torque Due to Radial Forces
Work and Kinetic Energy
A particle of mass m is tied to a string that passes through a hole in a frictionless table and held.
The mass is given a push so that it moves in a circle of radius r at speed v.
a) What is the torque exerted on the particle by the string?
b) What is the magnitude of the angular momentum L of the particle in the direction of the axis
of rotation (as a function of m, r and v)?
c) Show that the magnitude of the force (the tension in the string) that must be exerted to keep
the particle moving in a circle is:
F =
L
2
mr
3
d) Show that the kinetic energy of the particle in terms of its angular momentum is:
K =
L
2
2mr
2
Now, suppose that the radius of the orbit and initial speed are r
i
and v
i
, respectively. From under
the table, the string is slowly pulled down (so that the puck is always moving in an approximately
circular trajectory and the tension in the string remains radial) to where the particle is moving in a
circle of radius r
2
.
e) Find its velocity v
2
using angular momentum conservation. This should be very easy.
f) Compute the work done by the force from part c) above and identify the answer as the work-
kinetic energy theorem.
Problem 6.
r
pivot
y
z
m
v
in
x
Vector Torque
Non-equivalence of

L and I .
In the gure above, a mass m is being spun in a circular path at a constant speed v around the
z-axis on the end of a massless rigid rod of length r pivoted at the orgin (that itself is being pushed
by forces not shown). All answers should be given in terms of m, r, and v. Ignore gravity and
friction.
a) Find the angular momentum vector of this system relative to the pivot at the instant shown
and draw it in on a copy of the gure.
b) Find the angular velocity vector of the mass m at the instant shown and draw it in on the
gure above. Is

L = I
z
, where I
z
= mr
2
sin
2
() is the moment of inertia around the z axis?
What component of the angular momentum is equal to I
z
?
c) What is the magnitude and direction of the torque exerted by the rod on the mass (relative to
the pivot shown) in order to keep it moving in this circle at constant speed? (Hint: Consider
the precession of the angular momentum around the z-axis where the precession frequency is
, and follow the method presented in the textbook above.)
d) What is the direction of the force exerted by the rod in order to create this torque? (Hint:
Shift gears and think about the actual trajectory of the particle. What must the direction of
the force be?)
e) Set = rF
or = r
F and determine the magnitude of this force. Note that it is equal in

magnitude to your answer to c) above and has just the right direction!
Optional Problems
some extra things to work on or test yourself with.
Optional Problem 7.
v
m
d
L
M
A rod of mass M and length L is hanging vertically from a frictionless pivot (where gravity is
down). A blob of putty of mass m approaches with velocity v from the left and strikes the rod a
distance d from its center of mass as shown, sticking to the rod.
a) Find the angular velocity
f
of the system about the pivot (at the top of the rod) after the
collision.
b) Find the distance x
cm
from the pivot of the center of mass of the rod-putty system immediately
after the collision.
c) Find the velocity of the center of mass v
cm
of the system (immediately) after the collision.
d) Find the kinetic energy of the rod and putty immediately after the collision. Was kinetic
energy conserved in this collision? If not, how much energy was lost to heat?
e) After the collision, the rod swings up to a maximum angle
max
and then comes momentarily
to rest. Find
max
.
f) In general (for most values of d is linear momentum conserved in this collision? At the risk
of giving away the answer, why not? What exerts an external force on the system during the
collision when momentum is not conserved?
All answers should be in terms of M, m, L, v, g and d as needed.
308 Week 7: Statics
Optional Problem 8.
m
v
M
L
d
Impulse
A rod of mass M and length L rests on a frictionless table. A blob of putty of mass m approaches
with velocity v from the left and strikes the rod a distance d from the end as shown, sticking to the
rod.
Find the angular velocity of the system about the center of mass of the system after the
collision. Note that the rod and putty will not be rotating about the center of mass of the rod!
Is the linear momentum of the rod/blob system conserved in this collision for a general value
of d? If not, why not?
Is kinetic energy conserved in this collision? If not, how much is lost? Where does the energy
go?
All answers should be in terms of M, m, L, v and d as needed. Note well that you should clearly
indicate what physical principles you are using to solve this problem at the beginning of the work.
Week 7: Statics
Statics Summary
A rigid object is in static equilibrium when both the vector torque and the vector force
acting on it are zero. That is:
If

F
tot
= 0 and
tot
= 0, then an object initially at rest will remain at
rest and neither accelerate nor rotate.
This rule applies to particles with intrinsic spin as well as rigid objects, but this week we
will primarily concern ourselves with rigid objects as static force equilibrium for particles was
previously discussed.
Note well that the torque and force in the previous problem are both vectors. In many
problems they will eectively be one dimensional, but in some they will not and you must
establish e.g. the torque equilibrium condition for several dierent directions.
A common question that arises in statics is the tipping problem. For an object placed on a
slope or pivoted in some way such that gravity opposed by normal forces provides one of the
sources of torque that tends to keep the object stable, while some variable force provides a
torque that tends to tip the object over the pivot, one uses the condition of marginal static
equilibrium to determine, e.g. the lowest value of the variable force that will tip the object
over.
A force couple is dened to be a pair of forces that are equal and opposite but that do not
necessarily or generally act along the same line upon an object. The point of this
denition is that it is easily to see that force couples exert no net force on an object but
they will exert a net torque on the object as long as they do not act along the same line.
Furthermore:
The vector torque exerted on a rigid object by a force couple is the same for all choices
of pivot! This (and the frequency with which they occur in problems) is the basis for the
denition.
As you can see, this is a short week, just perfect to share with the midterm hour exam.
7.1: Conditions for Static Equilibrium
We already know well (I hope) from our work in the rst few weeks of the course that an object
at rest remains at rest unless acted on by a net external force! After all, this is just Newtons First
Law! If a particle is located at some position in any inertial reference frame, and isnt moving, it
wont start to move unless we push on it with some force produced by a law of nature.
309
310 Week 7: Statics
Newtons Second Law, of course, applies only to particles innitesimal chunklets of mass in
extended objects or elementary particles that really appear to have no nite extent. However, in
week 4 we showed that it also applies to systems of particles, with the replacement of the position of
the particle by the position of the center of mass of the system and the force with the total external
force acting on the entire system (internal forces cancelled), and to extended objects made up of
many of those innitesimal chunklets. We could then extend Newtons First Law to apply as well
to amorphous systems such as clouds of gas or structured systems such as rigid objects as long
as we considered being at rest a statement concerning the motion of their center of mass. Thus
a baseball, made up of a truly staggering number of elementary microscopic particles, becomes a
particle in its own right located at its center of mass.
We also learned that the force equilibrium of particles acted on by conservative force occurred at
the points where the potential energy was maximum or minimum or neutral (at), where we named
maxima unstable equilibrium points, minima stable equilibrium points and at regions neutral
equilibria
122
.
However, in weeks 5 and 6 we learned enough to now be able to see that force equilibrium alone
is not sucient to cause an extended object or collection of particles to be in equilibrium. We can
easily arrange situations where two forces act on an object in opposite directions (so there is no net
force) but along lines such that together they exert a nonzero torque on the object and hence cause
it to angularly accelerate and gain kinetic energy without bound, hardly a condition one would call
equilibrium.
The good news is that Newtons Second Law for Rotation is sucient to imply Newtons First
Law for Rotation:
If, in an inertial reference frame, a rigid object is initially at rotational rest
(not rotating), it will remain at rotational rest unless acted upon by a net
external torque.
That is, = I = 0 implies = 0 and constant
123
. We will call the condition where = 0 and a
rigid object is not rotating torque equilibrium.
We can make a baseball (initially with its center of mass at rest and not rotating) spin without
exerting a net force on it that makes its center of mass move it can be in force equilibrium but not
torque equilibrium. Similarly, we can throw a baseball without imparting any rotational spin it
can be in torque equilibrium but not force equilibrium. If we want the baseball (or any rigid object)
to be in a true static equilibrium, one where it is neither translating nor rotating in the future if
it is at rest and not rotating initially, we need both the conditions for force equilibrium and torque
equilibrium to be true.
Therefore we now dene the conditions for the static equilibrium of a rigid body to be:
A rigid object is in static equilibrium when both the vector torque and the
vector force acting on it are zero.
That is:
If

F
tot
= 0 and
tot
= 0, then an object initially at translational and rota-
tional rest will remain at rest and neither accelerate nor rotate.
122
Recall that neutral equilibria were generally closer to being unstable than stable, as any nonzero velocity, no
matter how small, would cause a particle to move continuously across the neutral region, making no particular point
stable to say the least. That same particle would oscillate, due to the restoring force that traps it between the turning
points of motion that we previously learned about and at least remain in the vicinity of a true stable equilibrium
point for small enough velocities/kinetic energies.
123
Whether or not I is a scalar or a tensor form...
Week 7: Statics 311
Thats it. Really, pretty simple.
Needless to say, the idea of stable versus unstable and neutral equilibrium still holds for torques
as well as forces. We will consider an equilibrium to be stable only if both the force and the torque
are restoring and push or twist the system back to the equilibrium if we make small linear or
angular displacements away from it.
7.2: Static Equilibrium Problems
After working so long and hard on solving actual dynamical problems involving force and torque,
static equilibrium problems sound like they would be pretty trivial. After all, nothing happens! It
seems as though solving for what happens when nothing happens would be easy.
Not so. To put it in perspective, lets consider why we might want to solve a problem in static
equilibrium. Suppose we want to build a house. A properly built house is one that wont just fall
down, either all by itself or the rst time the wolf hus and pus at your door. It seems as though
building a house that is stable enough not to fall down when you move around in it, or load it with
furniture in dierent ways, or the rst time a category 2 hurricane roars by overhead and whacks
it with 160 kilometer per hour winds is a worthy design goal. You might even want it to survive
earthquakes!
If you think that building a stable house is easy, I commend trying to build a house out of
cards
124
. You will soon learn that balancing force loads, taking advantage of friction (or other
fastening forces, avoiding unbalanced torques is all actually remarkably tricky, for all that we
can learn to do it without solving actual equations. Engineers who want to build serious structures
such as bridges, skyscrapers, radio towers, cars, airplanes, and so on spend a lot of time learning
statics (and a certain amount of dynamics, because no structure in a dynamical world lled with
Big Bad Wolves is truly static) because it is very expensive when buildings, bridges, and so on
fall down, when their structural integrity fails.
Stability is just as important for physicians to understand. The human body is not the worlds
most stable structure, as it turns out. If you have ever played with Barbie or G.I. Joe dolls, then you
understand that getting them to stand up on their own takes a bit of doing just a bit of bend at
the waist, just a bit too much weight at the side, or the feet not adjusted just so, and they fall right
over. Actual humans stabilize their erect stance by constantly adjusting the force balance of their
feet, shifting weight without thinking to the heel or to the toes, from the left foot to the right foot
as they move their arms or bend at the waist or lift something. Even healthy, coordinated adults
who are paying attention nevertheless sometimes lose their balance because their motions exceed the
fairly narrow tolerance for stability in some stance or another.
This ability to remain stable standing up or walking rapidly disappears as ones various sensory
feedback mechanisms are impaired, and many, many health conditions impair them. Drugs or
alcohol, neuropathy, disorders of the vestibular system, pain and weakness due to arthritis or aging.
Many injuries (especially in the elderly) occur because people just plain fall over.
Then there is the fact that nearly all of our physical activity involves the adjustment of static
balance between muscles (providing tension) and bones (providing compression), with our joints
becoming stress-points that have to provide enormous forces, painlessly, on demand. In the end,
physicians have to have a very good conceptual understanding of static equilibrium in order to help
their patients acheive it and maintain it in the many aspects of the mechanical operation of the
human body where it is essential.
For this reason, no matter who you are taking this course, you need to learn to solve real statics
124
Wikipedia: http://www.wikipedia.org/wiki/House of cards. Yes, even this has a wikipedia entry. Pretty cool,
actually!
312 Week 7: Statics
problems, ones that can help you later understand and work with statics as your life and career
demand. This may be nothing more than helping your kid build a stable tree house, but yknow,
you dont want to help them build a tree house and have that house fall out of the tree with your
kid in it, nor do you want to deny them the joy of hanging out in their own tree house up in the
trees!
As has been our habit from the beginning of the course, we start by considering the simplest
problems in static equilibrium and then move on to more dicult ones. The simplest problems
cannot, alas, be truly one dimensional because if the forces involved are truly one dimensional (and
act to the right or left along a single line) there is no possible torque and force equilibrium suces
for both.
The simplest problem involving both force and torque is therefore at least three dimensional
two dimensional as far as the forces are concerned and one dimensional as far as torque and rotation
is concerned. In other words, it will involve force balance in some plane of (possible) rotation and
torque balance perpendicular to this plane alone a (possible) axis of rotation.
Example 7.2.1: Balancing a See-Saw
y
m
1
m
2
x x
1 2
m
1
m
2
g
g
F
Figure 92: You are given m
1
, x
1
, and x
2
and are asked to nd m
2
and F such that the see-saw is
in static equilibrium.
One typical problem in statics is balancing weights on a see-saw type arrangement a uniform
plank supported by a fulcrum in the middle. This particular problem is really only one dimensional
as far as force is concerned, as there is no force acting in the x-direction or z-direction. It is one
dimensional as far as torque is concerned, with rotation around any pivot one might select either
into or out of the paper.
Static equilibrium requires force balance (one equation) and torque balance (one equation) and
therefore we can solve for pretty much any two variables (unknowns) visible in gure 92 above. Lets
imagine that in this particular problem, the mass m
1
and the distances x
1
and x
2
are given, and we
need to nd m
2
and F.
We have two choices to make where we select the pivot and which direction (in or out of the
page) we are going to dene to be positive. A perfectly reasonable (but not unique or necessarily
best) choice is to select the pivot at the fulcrum of the see-saw where the unknown force F is
exerted, and to select the +z-axis as positive rotation (out of the page as drawn).
We then write:
F
y
= F m
1
g m
2
g = 0 (645)
z
= x
1
m
1
g x
2
m
2
g = 0 (646)
Week 7: Statics 313
This is almost embarrassingly simple to solve. From the second equation:
m
2
=
m
1
gx
1
gx
2
=
_
x
1
x
2
_
m
1
(647)
It is worth noting that this is precisely the mass that moves the center of mass of the system so
that it is square over the fulcrum/pivot.
From the rst equation and the solution for m
2
:
F = m
1
g +m
2
g = m
1
g
_
1 +
_
x
1
x
2
__
= m
1
g
_
x
1
+x
2
x
2
_
(648)
Thats all there is to it! Obviously, we could have been given m
1
and m
2
and x
1
and been asked to
nd x
2
and F, etc, just as easily.
Example 7.2.2: Two Saw Horses
x
L
y
x
M
F
1
F
2
mg Mg
pivot
Figure 93: Two saw horses separated by a distance L support a plank of mass m symmetrically
placed across them as shown. A block of mass M is placed on the plank a distance x from the saw
horse on the left.
In gure 93, two saw horses separated by a distance L support a symmetrically placed plank.
The rigid plank has mass m and supports a block of mass M placed a distance x from the left-hand
saw horse. Find F
1
and F
2
, the upward (normal) force exerted by each saw horse in order for this
system to be in static equilibribum.
First let us pick something to put into equilibrium. The saw horses look pretty stable. The mass
M does need to be in equilibrium, but that is pretty trivial the plank exerts a normal force on
M equal to its weight. The only tricky thing is the plank itself, which could and would rotate or
collapse if F
1
and F
2
dont correctly balance the load created by the weight of the plank plus the
weight of the mass M.
Again there are no forces in x or z, so we simply ignore those directions. In the y direction:
F
1
+F
2
mg Mg = 0 (649)
or the two saw horses must support the total weight of the plank plus the block, F
1
+ F
2
=
(m + M)g. This is not unreasonable or even unexpected, but it doesnt tell us how this weight is
distributed between the two saw horses.
Once again we much choose a pivot. Four possible points the point on the left-hand saw horse
where F
1
is applied, the point at L/2 that is the center of mass of the plank (and half-way in between
the two saw horses), the point under mass M where its gravitational force acts, and the point on
the right-hand saw horse where F
2
is applied. Any of these will eliminate the torque due to one of
the forces and presumably will simplify the problem relative to more arbitrary points. We select the
left-hand point as shown why not?
Then:
z
= F
2
L mgL/2 Mgx = 0 (650)
314 Week 7: Statics
states that the torque around this pivot must be zero. We can easily solve for F
2
:
F
2
=
mgL/2 +Mgx
L
=
mg
2
+Mg
x
L
(651)
Finally, we can solve for F
1
:
F
1
= (m+M)g F
2
=
mg
2
+Mg
L x
L
(652)
Does this make sense? Sure. The two saw horses share the weight of the symmetrically placed
plank, obviously. The saw horse closest to the block M supports most of its weight, in a completely
symmetric way. In the picture above, with x > L/2, that is saw horse 2, but if x < L/2, it would
have been saw horse 1. In the middle, where x = L/2, the two saw horses symmetrically share the
weight of the block as well!
This picture and solution are worth studying until all of this makes sense. Carrying things like
sofas and tables (with the load shared between a person on either end) is a frequent experience, and
from the solution to this problem you can see that if the load is not symmetrical, the person closest
to the center of gravity will carry the largest load.
Lets do a slightly more dicult one, one involving equilibrium in two force directions (and one
torque direction). This will allow us to solve for three unknown quantities.
Example 7.2.3: Hanging a Tavern Sign
mg
T
F
F
y
x
pivot
and
for sale
MechanicAle
Physics Beer
Figure 94: A sign with mass m is hung from a massless rigid pole of length L attached to a post
and suspended by means of a wire at an angle relative to the horizontal.
Suppose that one day you get tired being a hardworking professional and decide to give it all
up and open your own tavern/brewpub. Naturally, you site it in a lovely brick building close to
campus (perhaps in Brightleaf Square). To attract passers-by you need a really good sign the old
fashioned sort made out of solid oak that hangs from a pole, one that (with the pole) masses m = 50
kg.
However, you really dont want the sign to either punch through the brick wall or break the
suspension wire you are going to use to support the end farthest from the wall and you dont trust
your architect because he seems way too interested in your future wares, so you decide to work out
for yourself just what the forces are that the wall and wire have to support, as a function of the
angle between the support pole and the support wire.
The physical arrangement you expect to end up with is shown in gure 94. You wish to nd F
x
,
F
y
and T, given m and .
Week 7: Statics 315
By now the idea should be sinking in. Static equilibrium requires

F = 0 and
= 0. There
are no forces in the z direction so we ignore it. There is only torque in the +z direction. In this
problem there is a clearly-best pivot to choose one at the point of contact with the wall, where
the two forces F
x
and F
y
are exerted. If we choose this as our pivot, these forces will not contribute
to the net torque!
Thus:
F
x
T cos() = 0 (653)
F
y
+T sin() mg = 0 (654)
T sin()L mgL/2 = 0 (655)
The last equation involves only T, so we solve it for:
T =
mg
2 sin()
(656)
We can substitute this into the rst equation and solve for F
x
:
F
x
=
1
2
mg cot() (657)
Ditto for the second equation:
F
y
= mg
1
2
mg =
1
2
mg (658)
There are several features of interest in this solution. One is that the wire and the wall support
each must support half of the weight of the sign. However, in order to accomplish this, the tension
in the wire will be strictly greater than half the weight!
Consider = 30
. Then T = mg (the entire weight of the sign) and F

x
=
3
2
mg. The magnitude
of the force exerted by the wall on the pole equals the tension.
Consider = 10
. Now T 2.9mg (which still must equal the magnitude of the force exerted by
the wall. Why?). The smaller the angle, the larger the tension (and force exerted by/on the wall).
Make the angle too small, and your pole will punch right through the brick wall!
7.2.1: Equilibrium with a Vector Torque
So far weve only treated problems where all of the forces and moment arms live in a single plane (if
not in a single direction). What if the moment arms themselves live in a plane? What if the forces
exert torques in dierent directions?
Nothing changes a whole lot, actually. One simply has to set each component of the force and
torque to zero separately. If anything, it may give us more equations to work with, and hence the
ability to deal with more unknowns, at the cost of naturally some algebraic complexity.
Static equilibrium problems involving multiple torque directions are actually rather common.
Every time you sit in a chair, every time food is placed on a table, the legs increase the forces they
supply to the seat to maintain force and torque equilibrium. In fact, every time any two-dimensional
sheet of mass, such as a oor, a roof, a tray, a table is suspended horizontally, one must solve a
problem in vector torque to keep it from rotating around any of the axes in the plane.
We dont need to solve the most algebraically complex problems in the Universe in order to
learn how to balance both multiple force components and multiple torque components, but we do
need to do one or two to get the idea, because nearly everybody who is taking this course needs
to be able to actually work with static equilibrium in multiple dimensions. Physicists need to be
able to understand it both to teach it and to prime themselves for the full-blown theory of angular
316 Week 7: Statics
momentum in a more advanced course. Engineers, well, we dont want those roofs to tip over, those
bridges to fall down. Physicians and veterinarians balancing human or animal bodies so that they
dont tip over one way or another seems like a good idea. Things like canes, four point walkers,
special support shoes all are tools you may one day use to help patients retain the precious ability
to navigate the world in an otherwise precarious vertical static equilibrium.
Example 7.2.4: Building a Deck
F
mg (down/in)
Mg (down/in)
F F
F
1
1
1
2
3
4
W = 4
L = 6
= 0
Figure 95:
In gure 95 a very simple deck layout is shown. The deck is 4 meters wide and 6 meters long.
It is supported by four load-bearing posts, one at each corner. You would like to put a hot tub on
the deck, one that has a loaded mass of m = 2000 kg, so that its center of mass is 1 meter in and
1 meter up from the lower left corner (as drawn) next to the house. The deck itself is a uniform
concrete slab of mass M = 4000 kg with its center of mass is at (3,2) from the lower left corner.
You would like to know if putting the hot tub on the deck will exceed the safe load capacity of
the nearest corner support. It seems to you that as it is loaded with the hot tub, it will actually
reduce the load on F
3
. So nd F
1
, F
2
, and F
4
when the deck is loaded in this way, assuming a
perfectly rigid plane deck and F
3
= 0.
First of all, we need to choose a pivot, and Ive chosen a fairly obvious one the lower left corner,
where the x axis runs through F
1
and F
4
and the y axis runs through F
1
and F
2
.
Second, we need to note that
F
x
and
F
y
can be ignored there are no lateral forces at all
at work here. Gravity pulls the masses down, the corner beams push the deck itself up. We can
solve the normal force and force transfer in our heads supporting the hot tub, the deck experiences
a force equal to the weight of the hot tub right below the center of mass of the hot tub.
This gives us only one force equation:
F
1
+F
2
+F
4
mg Mg = 0 (659)
That is, yes, the three pillars weve selected must support the total weight of the hot tub and deck
together, since the F
3
pillar refuses to help out.
It gives us two torque equations, as hopefully it is obvious that
z
= 0! To make this nice and
algebraic, we will set h
x
= 1, h
y
= 1 as the position of the hot tub, and use L/2 and W/2 as the
Week 7: Statics 317
position of the center of mass of the deck.
x
= WF
2
W
2
Mg h
y
mg = 0 (660)
y
= h
y
mg +
L
2
Mg LF
4
= 0 (661)
Note that if F
3
was acting, it would contribute to both of these torques and to the force above,
and there would be an innite number of possible solutions. As it is, though, solving this is pretty
easy. Solve the last two equations for F
2
and F
4
respectively, then substitute the result into F
1
.
Only at the end substitute numbers in and see roughly what F
1
might be. Bear in mind that 1000
kg is a metric ton and weighs roughly 2200 pounds. So the deck and hot tub together, in this
not-too-realistic problem, weigh over 6 tons!
Oops, we forgot the people in the hot tub and the barbecue grill at the far end and the furniture
and the dog and the dancing. Better make the corner posts twice as strong as they need to be. Or
even four times.
Once you see how this one goes, you should be ready to tackle the homework problem involving
three legs, a tabletop, and a weight same problem, really, but more complicated numbers.
7.3: Tipping
Another important application of the ideas of static equilibrium is to tipping problems. A tipping
problem is one where one uses the ideas of static equilibrium to identify the particular angle or force
combination that will marginally cause some object to tip over. Sometimes this is presented in the
context of objects on an inclined plane, held in place by static friction, and a tipping problem can be
combined with a slipping problem: determining if a block placed on an incline that is gradually
raised tips rst or slips rst.
The idea of tipping is simple enough. An object placed on a at surface is typically stable as
long as the center of gravity is vertically inside the edges that are in contact with the surface,
so that the torque created by the gravitational force around this limiting pivot is opposed by the
torque exerted by the (variable) normal force.
Thats all there is to it! Look at the center of gravity, look at the corner or edge intuition tells
you the object will tip over, done.
Example 7.3.1: Tipping Versus Slipping
In gure 96 a rectangular block of height H and width W is sitting on a rough plank that is gradually
being raised at one end (so the angle it makes with the horizontal, , is slowly increasing).
At some angle we know that the block will start to slide. This will occur because the normal
force is decreasing with the angle (and hence, so is the maximum force static friction can exert)
and at the same time, the component of the weight of the object that points down the incline is
increasing. Eventually the latter will exceed the former and the block will slide.
However, at some angle the block will also tip over. We know that this will happen because
the normal force can only prevent the block from rotating clockwise (as drawn) around the pivot
consisting of the lower left corner of the block. Unless the block has a magnetic lower surface, or
a lower surface covered with velcro or glue, the plank cannot attract the lower surface of the block
and prevent it from rotating counterclockwise.
As long as the net torque due to gravity (about this lower left pivot point) is into the page, the
plank itself can exert a countertorque out of the page sucient to keep the block from rotating down
318 Week 7: Statics
H
W
pivot
Figure 96: A rectangular block either tips rst or slips (slides down the incline) rst as the incline
is gradually increased. Which one happens rst? The gure is show with the block just past the
tipping angle.
through the plank. If the torque due to gravity is out of the page as it is in the gure 96 above,
when the center of gravity moves over and to the vertical left of the pivot corner the normal force
exerted by the plank cannot oppose the counterclockwise torque of gravity and the block will fall
over.
The tipping point, or tipping angle is thus the angle where the center of gravity is directly
over the pivot that the object will tip around as it falls over.
A very common sort of problem here is to determine whether some given block or shape will tip
rst or slip rst. This is easy to nd. First lets nd the slipping angle
s
. Let down mean down
the incline. Then:
F
down
= mg sin() F
s
= 0 (662)
= N mg cos() = 0 (663)
From the latter, as usual:
N = mg cos() (664)
and F
s
F
max
s
=
s
N.
When
mg sin(
s
) = F
max
s
=
s
cos(
s
) (665)
the force of gravity down the incline precisely balances the force of static friction. We can solve for
the angle where this occurs:
s
= tan
1
(
s
) (666)
Now lets determine the angle where it tips over. As noted, this is where the torque to to gravity
around the pivot that the object will tip over changes sign from in the page (as drawn, stable) to out
of the page (unstable, tipping over). This happens when the center of mass passes directly over
the pivot.
From inspection of the gure (which is drawn very close to the tipping point) it should be clear
that the tipping angle
t
is given by:
t
= tan
1
_
W
H
_
(667)
So, which one wins? The smaller of the two,
s
or
t
, of course thats the one that happens
rst as the plank is raised. Indeed, since both are inverse tangents, the smaller of:
s
, W/H (668)
Week 7: Statics 319
determines whether the system slips rst or tips rst, no need to actually evaluate any tangents or
inverse tangents!
Example 7.3.2: Tipping While Pushing
F
h
H
W
s
Figure 97: A uniform rectangular block with dimensions W by H (which has its center of mass at
W/2, H/2) is pushed at a height h by a force F. The block sits on a horizontal smooth table with
coecient of static friction
s
.
A uniform block of mass M being pushed by a horizontal outside force (say, a nger) a height h
above the at, smooth surface it is resting on (say, a table) as portrayed in gure 97. If it is pushed
down low (small h) the block slides. If pushed up high (large h) it tips. Find a condition for the
height h at which it tips and slips at the same time.
The solution here is much the same as the solution to the previous problem. We independently
determine the condition for slipping, as that is rather easy, and then using the maximum force that
can be applied without it quite slipping, nd the height h at which the block barely starts to tip
over.
Tipping over in this case means that all of the normal force will be concentrated right at the
pivot corner (the one the block will rotate around as it tips over) because the rest of the bottom
surface is barely starting to leave the ground. All of the force of static friction is similarly concentrated
at this one point. This is convenient to us, since neither one will therefore contribute to the torque
around this point!
Conceptually, then, we seek the point h where, pushing with the maximum non-slipping force,
the torque due to gravity alone is exactly equal to the torque exerted by the force F. This seems
simple enough.
To nd the force we need only to examine the usual force balance equations:
F F
s
= 0 (669)
N Mg = 0 (670)
and hence N = Mg (as usual) and:
F
max
= F
max
s
=
s
N =
s
Mg (671)
(also as usual). Hopefully by now you had this completely solved in your head before I even wrote it
all down neatly and were saying to yourself F
max
, yeah, sure, thats
s
Mg, lets get on with it...
So we shall. Consider the torque around the bottom right hand corner of the block (which is
clearly and intuitively the tipping pivot around which the block will rotate as it falls over when
the torque due to F is large enough to overcome the torque of gravity). Let us choose the positive
direction for torque to be out of the page. It should then be quite obvious that when the block is
barely tipping over, so that we can ignore any torque due to N and F
s
:
WMg
2
h
crit
F
max
=
WMg
2
h
crit
s
Mg = 0 (672)
320 Week 7: Statics
or (solving for h
crit
, the critical height where it barely tips over even as it starts to slip):
h
crit
=
W
2
s
(673)
Now, does this make sense? If
s
0 (a frictionless surface) we will never tip it before it starts
to slide, although we might well push hard enough to tip it over in spite of it sliding. We note that
in this limit, h
crit
, which makes sense. On the other hand for nite
s
if we let W become
very small then h
crit
similarly becomes very small, because the block is now very thin and is indeed
rather precariously balanced.
The last bit of sense we need to worry about is h
crit
compared to H. If h
crit
is larger than
H, this basically means that we cant tip the block over before it slips, for any reasonable
s
. This
limit will always be realized for W H. Suppose, for example,
s
= 1 (the upper limit of normal
values of the coecient of static friction that doesnt describe actual adhesion). Then h
crit
= W/2,
and if H < W/2 there is no way to push in the block to make it tip before it slips. If
s
is more
reasonable, say
s
= 0.5, then only pushing at the very top of a block that is W W in dimension
marginally causes the block to tip. We can thus easily determine blocks can be tipped by a
horizontal force and which ones cannot, just by knowing
s
and looking at the blocks!
7.4: Force Couples
r
pivot
1
2
r
2
F
F
1
12
r
Figure 98: A Force Couple is a pair of equal and opposite forces that may or may not act along
the line between the points where they are applied to a rigid object. Force couples exert a torque
that is indenpedent of the pivot on an object and (of course) do not accelerate the center of mass
of the object.
Two equal forces that act in opposite directions but not necessarily along the same line are called
a force couple. Force couples are important both in torque and rotation problems and in static
equilibrium problems. One doesnt have to be able to name them, of course we know everything
we need to be able to handle the physics of such a pair already without a name.
One important property of force couples does stand out as being worth deriving and learning
on its own, though hence this section. Consider the total torque exerted by a force couple in the
coordinate frame portrayed in gure ??:
= r
1

F
1
+r
2

F
2
(674)
Week 7: Statics 321
By hypothesis,

F
2
=
F
1
, so:
= r
1

F
1
r
2

F
1
= (r
1
r
2
)

F
1
= r
12

F
1
(675)
This torque no longer depends on the coordinate frame! It depends only on the dierence
between r
1
and r
2
, which is independent of coordinate system.
Note that we already used this property of couples when proving the law of conservation of
angular momentum it implies that internal Newtons Third Law forces can exert no torque on
a system independent of intertial reference frame. Here it has a slightly dierent implication it
means that if the net torque produced by a force couple is zero in one frame, it is zero
in all frames! The idea of static equilibrium itself is independent of frame!
It also means that equilibrium implies that the vector sum of all forces form force couples
in each coordinate direction that are equal and opposite and that ultimately pass through
the center of mass of the system. This is a conceptually useful way to think about some tipping
or slipping or static equilibrium problems.
Example 7.4.1: Rolling the Cylinder Over a Step
M
R
h
F
pivot
Figure 99:
One classic example of static equilibrium and force couples is that of a ball or cylinder being
rolled up over a step. The way the problem is typically phrased is:
a) Find the minimum force F that must be applied (as shown in gure 99) to cause the cylinder to
barely lift up o of the bottom step and rotate up around the corner of the next one, assuming
that the cylinder does not slip on the corner of the next step.
b) Find the force exerted by that corner at this marginal condition.
The simplest way to solve this is to recognize the point of the term barely. When the force F
is zero, gravity exerts a torque around the pivot out of the page, but the normal force of the tread
of the lower stair exerts a countertorque precisely sucient to keep the cylinder from rolling down
into the stair itself. It also supports the weight of the cylinder. As F is increased, it exerts a torque
around the pivot that is into the page, also opposing the gravitational torque, and the normal force
decreases as less is needed to prevent rotation down into the step. At the same time, the pivot exerts
a force that has to both oppose F (so the cylinder doesnt translate to the right) and support more
and more of the weight of the cylinder as the normal force supports less.
At some particular point, the force exerted by the step up will precisely equal the weight of the
step down. The force exerted by the step to the left will exactly equal the force F to the right.
These forces will (vector) sum to zero and will incidentally exert no net torque either, as a pair of
opposing couples.
322 Week 7: Statics
That is enough that we could almost guess the answer (at least, if we drew some very nice
pictures). However, we should work the problem algebraically to make sure that we all understand
it. Let us assume that F = F
m
, the desired minimum force where N 0. Then (with out of the
page positive):
= mg
_
R
2
(R h)
2
F
m
(2R h) = 0 (676)
where I have used the r
F form of the torque in both cases, and used the pythagorean theorem
and/or inspection of the gure to determine r
for each of the two forces. No torque due to N is

present, so F
m
in this case is indeed the minimum force F at the marginal point where rotation just
starts to happen:
F
m
=
mg
_
R
2
(R h)
2
2R h
(677)
Next summing the forces in the x and y direction and solving for F
x
and F
y
exerted by the pivot
corner itself we get:
F
x
= F
m
=
mg
_
R
2
(R h)
2
2R h
(678)
F
y
= mg (679)
Obviously, these forces form a perfect couple such that the torques vanish.
Thats all there is to it! There are probably other questions one could ask, or other ways to ask
the main question, but the idea is simple look for the marginal static condition where rotation, or
tipping, occur. Set it up algebraically, and then solve!
Week 7: Statics 323
Homework for Week 7
Problem 1.
Problem 2.
lift
pivot
In the gure above, three shapes (with uniform mass distribution and thickness) are drawn sitting
on a plane that can be tipped up gradually. Assuming that static friction is great enough that all
of these shapes will tip over before they slide, rank them in the order they will tip over as the angle
of the board they are sitting on is increased.
324 Week 7: Statics
Problem 3.
h
R
F
M
Static Equilibrium
Torque (about selected pivots)
Geometry of Right Triangles
A cylinder of mass M and radius R sits against a step of height h = R/2 as shown above. A
force

F is applied at right angles to the line connecting the corner of the step and the center of the
cylinder. All answers should be in terms of M, R, g.
a) Find the minimum value of |
F| that will roll the cylinder over the step if the cylinder does not
slide on the corner.
b) What is the force exerted by the corner (magnitude and direction) when that force

F is being
exerted on the center?
Week 7: Statics 325
Problem 4.
M
F?
D
m
d
T?
Static Equilibrium
Force and Torque
An exercising human person holds their arm of mass M and a barbell of mass m at rest at
an angle with respect to the horizontal in an isometric curl as shown. Their bicep muscle that
supports the suspended weight is connected at right angles to the bone a short distance d up from
the elbow joint. The bone that supports the weight has length D.
a) Find the tension T in the muscle, assuming for the moment that the center of mass of the
forearm is in the middle at D/2. Note that it is much larger than the weight of the arm and
barbell combined, assuming a reasonable ratio of D/d 25 or thereabouts.
b) Find the force

F (magnitude and direction) exerted on the supporting bone by the elbow
joint in the geometry shown. Again, note that it is much larger than just the weight being
supported.
326 Week 7: Statics
Problem 5.
w
w/2
d/3
w/3
d
m
Top view
Force Balance
Torque Balance
Static Equilibrium
The gure below shows a mass m placed on a table consisting of three narrow cylindrical legs at
the positions shown with a light (presume massless) sheet of Plexiglas placed on top. What is the
vertical force exerted by the Plexiglas on each leg when the mass is in the position shown?
Week 7: Statics 327
Problem 6.
T
m
M
L
P
Force Balance
Torque Balance
Static Equilibrium
A small round mass M sits on the end of a rod of length L and mass m that is attached to
a wall with a hinge at point P. The rod is kept from falling by a thin (massless) string attached
horizontally between the midpoint of the rod and the wall. The rod makes an angle with the
ground. Find:
a) the tension T in the string;
b) the force

F exerted by the hinge on the rod.
328 Week 7: Statics
Problem 7.
W
d
d
H
M
F
F
b
t
A door of mass M that has height H and width W is hung from two hinges located a distance
d from the top and bottom, respectively. Assuming that the vertical weight of the door
is equally distributed between the two hinges, nd the total force (magnitude and direction)
exerted by each hinge.
Neglect the mass of the doorknob and assume that the center of mass of the door is at W/2, H/2.
The force directions drawn for you are NOT likely to be correct or even close.
Week 7: Statics 329
Problem 8.
M
m
h
Torque Balance
Force Balance
Static Equilibrium
Static Friction
In the gure above, a ladder of mass m and length L is leaning against a wall at an angle .
A person of mass M begins to climb the ladder. The ladder sits on the ground with a coecient
of static friction
s
between the ground and the ladder. The wall is frictionless it exerts only a
normal force on the ladder.
If the person climbs the ladder, nd the height h where the ladder slips.
330 Week 7: Statics
Optional Problems
Optional Problem 9.
boom
30 45
L
F?
m
T?
M
A crane with a boom (the long support between the body and the load) of mass m and length L
holds a mass M suspended as shown. Assume that the center of mass of the boom is at L/2. Note
that the wire with the tension T is xed to the top of the boom, not run over a pulley to the mass
M.
a) Find the tension in the wire.
b) Find the force exerted on the boom by the crane body.
Note:
sin(30
) = cos(60
) =
1
2
cos(30
) = sin(60
) =
3
2
sin(45
) = cos(45
) =
2
2
Week 7: Statics 331
*
h
R
M
F
A cylinder of mass M and radius R sits against a step of height h = R/2 as shown above. A
force

F is applied parallel to the ground as shown. All answers should be in terms of M, R, g.
a) Find the minimum value of |
F| that will roll the cylinder over the step if the cylinder does not
slide on the corner.
b) What is the force exerted by the corner (magnitude and direction) when that force

F is being
exerted on the center?
332 Week 7: Statics
III: Applications of Mechanics
333
Week 8: Fluids
Fluids Summary
Fluids are states of matter characterized by a lack of long range order. They are characterized
by their density and their compressibility. Liquids such as water are (typically) relatively
incompressible; gases can be signicantly compressed. Fluids have other characteristics, for
example viscosity (how sticky the uid is). We will ignore these in this course.
Pressure is the force per unit area exerted by a uid on its surroundings:
P = F/A (680)
Its SI units are pascals where 1 pascal = 1 newton/meter squared. Pressure is also measured
in atmospheres (the pressure of air at or near sea level) where 1 atmosphere 10
5
pascals.
The pressure in an incompressible uid varies with depth according to:
P = P
0
+gD (681)
where P
0
is the pressure at the top and D is the depth.
Pascals Principle Pressure applied to a uid is transmitted undiminished to all points of
the uid.
Archimedes Principle The buoyant force on an object
F
b
= gV
disp
(682)
where frequency V
disp
is the volume of uid displaced by an object.
Conservation of Flow We will study only steady/laminar ow in the absence of turbulence
and viscosity.
I = A
1
v
1
= A
2
v
2
(683)
where I is the ow, the volume per unit time that passes a given point in e.g. a pipe.
For a circular smooth round pipe of length L and radius r carrying a uid in laminar ow
with dynamical viscosity
125
, the ow is related to the pressure dierence across the pipe
by the resistance R:
P = IR (684)
125
Wikipedia: http://www.wikipedia.org/wiki/viscosity. We will defer any actual statement of how viscosity is re-
lated to forces until we cover shear stress in a couple of weeks. Its just too much for now. Oh, and sorry about the
symbol. Yes, we already have used for e.g. static and kinetic friction. Alas, we will use for still more things
later. Even with both greek and roman characters to draw on, there just arent enough characters to cover all of
the quantities we want to algebraically work with, so you have to get used to their reuse in dierent contexts that
hopefully make them easy enough to keep straight. I decided that it is better to use the accepted symbol in this
textbook rather than make one up myself or steal a character from, say, Urdu or a rune from Ancient Norse.
335
336 Week 8: Fluids
It is worth noting that this is the uid-ow version of Ohms Law, which you will learn next
semester if you continue. We will generally omit the modier dynamical from the term
viscosity in this course, although there is actually another, equivalent measure of viscosity
called the kinematic viscosity, = /. The primary dierence is the units has the SI
units of pascal-seconds where has units of meters square per second.
The resistance R is given by the follow formula:
R =
8L
r
4
(685)
and the ow equation above becomes Poiseuilles Law
126
:
I =
P
R
=
r
4
P
8L
(686)
The key facts from this series of denitions are that ow increases linearly with pressure (so
to achieve a given e.g. perfusion in a system of capillaries one requires a sucient pressure
dierence across them), increases with the fourth power of the radius of the pipe (which is
why narrowing blood vessels become so dangerous past a certain point) and decreases with
the length (longer blood vessels have a greater resistance).
If we neglect resistance (an idealization roughly equivalent to neglecting friction) and con-
sider the ow of uid in a closed pipe that can e.g. go up and down, the work-mechanical
energy theorem per unit volume of the uid can be written as Bernoullis Equation:
P +
1
2
v
2
+gh = constant (687)
Venturi Eect At constant height, the pressure in a uid decreases as the velocity of the
uid increases (the work done by the pressure dierence is what speeds up the uid!. This is
responsible for e.g. the lift of an airplane wing and the force that makes a spinning baseball
or golf ball curve.
Toricellis Rule: If a uid is owing through a very small hole (for example at the bottom
of a large tank) then the velocity of the uid at the large end can be neglected in Bernoullis
Equation.
8.1: General Fluid Properties
Fluids are the generic name given to two states of matter, liquids and gases
127
characterized by
a lack of long range order and a high degree of mobility at the molecular scale. Let us begin by
visualizing uids microscopically, since we like to build our understanding of matter from the ground
up.
In gure 100 we see a highly idealized picture of what we might see looking into a tiny box full of
gas. Many particles all of mass m are constantly moving in random, constantly changing directions
(as the particles collide with each other and the walls) with an average kinetic energy related to the
temperature of the uid. Some of the particles (which might be atoms such as helium or neon or
126
Wikipedia: http://www.wikipedia.org/wiki/Hagen-Poiseuille equation. The derivation of this result isnt horribly
dicult or hard to understand, but it is long and beyond the scope of this course. Physics and math majors are
encouraged to give it a peek though, if only to learn where it comes from.
127
We will not concern ourselves with plasma as a possible fourth state of matter in this class, viewing it as just
an ionized gas although a very dense plasma might well be more like a liquid. Only physics majors and perhaps a
few engineers are likely to study plasmas, and you have plenty of time to gure them out after you have learned some
electromagnetic theory.
Week 8: Fluids 337
Impulse
Figure 100: A large number of atoms or molecules are conned within in a box, where they bounce
around o of each other and the walls. They exert a force on the walls equal and opposite the the
force the walls exert on them as the collisions more or less elastically reverse the particles momenta
perpendicular to the walls.
molecules such as H
2
or O
2
) happen to be close to the walls of the container and moving in the right
direction to bounce (elastically) o of those walls.
When they do, their momentum perpendicular to those walls is reversed. Since many, many
of these collisions occur each second, there is a nearly continuous momentum transfer between the
walls and the gas and the gas and the walls. This transfer, per unit time, becomes the average force
exerted by the walls on the gas and the gas on the walls (see the problem in Week 4 with beads
bouncing o of a pan).
Eventually, we will transform this simple picture into the Kinetic Theory of Gases and use
it to derive the venerable Ideal Gas Law (physicist style)
128
:
PV = Nk
b
T (688)
but for now we will ignore the role of temperature and focus more on understanding the physical
characteristics of the uid such as its density, the idea of pressure itself and the force exerted
by uids on themselves (internally) and on anything the uid presses upon along the lines of the
particles above and the walls of the box.
8.1.1: Pressure
As noted above, the walls of the container exert an average force on the uid molecules that conne
them by reversing their perpendicular momenta in collisions. The total momentum transfer is
proportional to the number of molecules that collide per unit time, and this in turn is (all things
being equal) clearly proportional to the area of the walls. Twice the surface area when conning
the same number of molecules over each part has to exert twice the force as twice the number of
collisions occur per unit of time, each transferring (on average) the same impulse. It thus makes
sense, when considering uids, to describe the forces that conne and act on the uids in terms of
pressure, dened to be the force per unit area with which a uid pushes on a conning wall or
the conning wall pushes on the uid:
P =
F
A
(689)
Pressure gets its own SI units, which clearly must be Newtons per square meter. We give these
128
Wikipedia: http://www.wikipedia.org/wiki/Ideal Gas Law.
338 Week 8: Fluids
units their own name, Pascals:
1 Pascal =
Newton
meter
2
(690)
A Pascal is a tiny unit of pressure a Newton isnt very big, recall (one kilogram weighs roughly
ten Newtons or 2.2 pounds) so a Pascal is the weight of a quarter pound spread out over a square
meter. Writing out pascal is a bit cumbersome and youll see it sometimes abbreviated Pa (with
the usual power-of-ten modications, kPa, MPa, GPa, mPa and so on).
A more convenient measure of pressure in our everyday world is the atmosphere the approximate
pressure of air at sea level (which really varies, of course, by several percent with the weather and
latitude and so on). There are at least three sets of units that are commonly used, not including
silly ones involving pounds and inches and things like that, so note the following carefully.
The symbol atm stands for one standard atmosphere. The symbol bar is more commonly
used than atm and has a slightly dierent denition and air pressure (in, say, a weather report) is
most commonly given in mbar, or 0.001 bar. The connection between the two is:
1 atm = 101.325 kPa = 1013.25 mbar (691)
Note that real air pressure at sea level is most unlikely to be this exact value, and the extra signicant
digits therefore refer only to an average value of no practical or immediate use. That is why the bar
is a far more convenient unit:
1 bar = 10
5
Pa = 100 kPa (692)
Because atmospheric pressure varies on the scale of millibars you will frequently see air pressure
given in mbar, e.g. 995 mbar, 1003 mbar. The mbar is probably the best of these units for
describing everyday air pressure (and its temporal and local and height variation without the need
for a decimal or power of ten), with Pascals being an equally good and useful general purpose
arbitrary precision unit
In this class the simpler rule 1 bar = 1 atm is more than adequate and makes pressure arithmetic
something you can often do with ngers and toes or the back of an envelope, with around a 1%
error.
Pressure isnt only exerted at the boundaries of uids. Pressure also describes the internal
transmission of forces within a uid. For example, we will soon ask ourselves Why dont uid
molecules all fall to the ground under the inuence of gravity and stay there? The answer is that
(at a sucient temperature) the internal pressure of the uid suces to support the uid above
upon the back (so to speak) of the uid below, all the way down to the ground, which of course has
to support the weight of the entire column of uid. Just as tension exists in a stretched string
at all points along the string from end to end, so the pressure within a uid is well-dened at all
points from one side of a volume of the uid to the other, although in neither case will the tension
or pressure in general be constant.
8.1.2: Density
As we have done from almost the beginning, let us note that even a very tiny volume of uid has
many, many atoms or molecules in it, at least under ordinary circumstances in our everyday lives.
True, we can work to create a vacuum a volume that has relatively few molecules in it per unit
volume, but it is almost impossible to make that number zero even the hard vacuum of outer space
has on average one molecule per cubic meter or thereabouts
129
. We live at the bottom of a gravity
well that connes our atmosphere the air that we breathe so that it forms a relatively thick soup
129
Wikipedia: http://www.wikipedia.org/wiki/Vacuum. Vacuum is, of course, nothing, and if you take the time
to read this Wikipedia article on it you will realize that even nothing can be pretty amazing. In man-made vacuums,
there are nearly always as many as hundreds of molecules per cubic centimeter.
Week 8: Fluids 339
that we move through and breathe with order of Avogadros Number (6 10
23
) molecules per liter
hundreds of billions of billions per cubic centimeter.
At this point we cannot possibly track the motion and interactions of all of the individual
molecules, so we coarse grain and average. The coarse graining means that we once again consider
volumes that are large relative to the sizes of the atoms but small relative to our macroscopic length
scale of meters cubic millimeters or cubic microns, for example that are large enough to contain
many, many molecules (and hence a well dened average number of molecules) but small enough to
treat like a dierential volume for the purposes of using calculus to add things up.
We could just count molecules in these tiny volumes, but the properties of oxygen molecules and
helium molecules might well be very dierent, so the molecular count alone may not be the most
useful quantity. Since we are interested in how forces might act on these small volumes, we need to
know their mass, and thus we dene the density of a uid to be:
=
dm
dV
, (693)
the mass per unit volume we are all familiar with from our discussions of the center of mass of
continuous objects and moments of inertia of rigid objects.
Although the denition itself is the same, the density of a uid behaves in a manner that is
similar, but not quite identical in its properties, to the density of a solid. The density of a uid
usually varies smoothly from one location to another, because an excess of density in one place will
spread out as the molecules travel and collide to smooth out, on average. The particles in some uids
(or almost any uid at certain temperatures) are sticky, or strongly interacting, and hence the
uid coheres together in clumps where the particles are mostly touching, forming a liquid. In other
uids (or all uids at higher temperatures) the molecules move so fast that they do not interact
much and spend most of their time relatively far apart, forming a gas.
A gas spreads itself out to ll any volume it is placed in, subject only to forces that conne it
such as the walls of containers or gravity. It assumes the shape of containers, and forms a (usually
nearly spherical) layer of atmosphere around planets or stars when conned by gravity. Liquids also
spread themselves out to some extent to ll containers they are place in or volumes they are conned
to by a mix of surface forces and gravity, but they also have the property of surface tension that
can permit a liquid to exert a force of connement on itself. Hence water lls a glass, but water also
forms nearly spherical droplets when falling freely as surface tension causes the droplet to minimize
its surface area relative to its volume, forming a sphere.
Surface chemistry or surface adhesion can also exert forces on uids and initiate things like
capillary ow of e.g. water up into very ne tubes, drawn there by the surface interaction of the
hydrophilic walls of the tube with the water. Similarly, hydrophobic materials can actually repel
water and cause water to bead up instead of spreading out to wet the surface. We will largely ignore
these phenomena in this course, but they are very interesting and are actually useful to physicians
as they use pipettes to collect uid samples that draw themselves up into sample tubes as if by
magic. Its not magic, its just physics.
8.1.3: Compressibility
A major dierence between uids and solids, and liquids and gases within the uids, is the compress-
ibility of these materials. Compressibility describes how a material responds to changes in pressure.
Intuitively, we expect that if we change the volume of the container (making it smaller, for example,
by pushing a piston into a conning cylinder) while holding the amount of material inside the volume
constant we will change the pressure; a smaller volume makes for a larger pressure. Although we
are not quite prepared to derive and fully justify it, it seems at least reasonable that this can be
340 Week 8: Fluids
expressed as a simple linear relationship:
P = B
V
V
(694)
Pressure up, volume down and vice versa, where the amount it goes up or down is related, not
unreasonably, to the total volume that was present in the rst place. The constant of proportionality
B is called the bulk modulus of the material, and it is very much like (and closely related to) the
spring constant in Hookes Law for springs.
Note well that we havent really specied yet whether the material is solid, liquid or gas.
All three of them have densities, all three of them have bulk moduli. Where they dier is in the
qualitative properties of their compressibility.
Solids are typically relatively incompressible (large B), although there are certainly exceptions.
The have long range order all of the molecules are packed and tightly bonded together in structures
and there is usually very little free volume. Atoms themselves violently oppose being squeezed
together because of the Pauli exclusion principle that forbids electrons from having the same
set of quantum numbers as well as straight up Coulomb repulsion that you will learn about next
semester.
Liquids are also relatively incompressible (large B). They dier from solids in that they lack
long range order. All of the molecules are constantly moving around and any small structures that
appear due to local interaction are short-lived. The molecules of a liquid are close enough together
that there is often signicant physical and chemical interaction, giving rise to surface tension and
wetting properties especially in water, which is (as one sack of water speaking to another) an
amazing uid!
Gases are in contrast quite compressible (small B). One can usually squeeze gases smoothly
into smaller and smaller volumes, until they reach the point where the molecules are basically all
touching and the gas converts to a liquid! Gases per se (especially hot gases) usually remain weakly
interacting right up to where they become a liquid, although the correct (non-ideal) equation of
state for a real gas often displays features that are the results of moderate interaction, depending
on the pressure and temperature.
Water
130
is, as noted, a remarkable liquid. H
2
O is a polar molecules with a permanent dipole
moment, so water molecules are very strongly interacting, both with each other and with other
materials. It organizes itself quickly into a state of relative order that is very incompressible. The
bulk modulus of water is 2.2 10
9
Pa, which means that even deep in the ocean where pressures
can be measured in the tens of millions of Pascals (or hundreds of atmospheres) the density of
water only varies by a few percent from that on the surface. Its density varies much more rapidly
with temperature than with pressure
131
. We will idealize water by considering it to be perfectly
incompressible in this course, which is close enough to true for nearly any mundane application of
hydraulics that you are most unlikely to ever observe an exception that matters.
8.1.4: Viscosity and uid ow
Fluids, whether liquid or gas, have some internal stickiness that resists the relative motion of one
part of the uid compared to another, a kind of internal friction that tries to equilibrate an entire
body of uid to move together. They also interact with the walls of any container in which they
130
Wikipedia: http://www.wikipedia.org/wiki/Properties of Water. As I said, water is amazing. This article is well
worth reading just for fun.
131
A fact that impacts my beer-making activities quite signicantly, as the specic gravity of hot wort fresh o of
the boil is quite dierent from the specic gravity of the same wort cooled to room temperature. The specic gravity
of the wort is related to the sugar content, which is ultimately related to the alcohol content of the fermented beer.
Just in case this interests you...
Week 8: Fluids 341
are conned. The viscosity of a uid (symbol ) is a measure of this internal friction or stickiness.
Thin uids have a low viscosity and ow easily with minimum resistance; thick sticky uids have a
high viscosity and resist ow.
Fluid, when owing through (say) a cylindrical pipe tends to organize itself in one of two very
dierent ways a state of laminar ow where the uid at the very edge of the owing volume is at
rest where it is in contact with the pipe and the speed concentrically and symmetrically increases
to a maximum in the center of the pipe, and turbulent ow where the uid tumbles and rolls and
forms eddies as it ows through the pipe. Turbulence and ow and viscosity are properties that will
be discussed in more detail below.
8.1.5: Properties Summary
To summarize, uids have the following properties that you should conceptually and intuitively
understand and be able to use in working uid problems:
They usually assume the shape of any vessel they are placed in (exceptions are associated
with surface eects such as surface tension and how well the uid adheres to the surface in
question).
They are characterized by a mass per unit volume density .
They exert a pressure P (force per unit area) on themselves and any surfaces they are in
contact with.
The pressure can vary according to the dynamic and static properties of the uid.
The uid has a measure of its stickiness and resistance to ow called viscosity. Viscosity is
the internal friction of a uid, more or less. We will treat uids as being ideal and ignore
viscosity in this course.
Fluids are compressible when the pressure in a uid is increased, its volume descreases
according to the relation:
P = B
V
V
(695)
where B is called the bulk modulus of the uid (the equivalent of a spring constant).
Fluids where B is a large number (so large changes in pressure create only tiny changes in
fractional volume) are called incompressible. Water is an example of an incompressible uid.
Below a critical speed, the dynamic ow of a moving uid tends to be laminar, where every
bit of uid moves parallel to its neighbors in response to pressure dierentials and around
obstacles. Above that speed it becomes turbulent ow. Turbulent ow is quite dicult to
treat mathematically and is hence beyond the scope of this introductory course we will
restrict our attention to ideal uids either static or in laminar ow.
We will now use these general properties and denitions, plus our existing knowledge of physics,
to deduce a number of important properties of and laws pertaining to static uids, uids that are
in static equilibrium.
342 Week 8: Fluids
F
left
F
right
V
A
Fluid (density )
Confining box
Figure 101: A uid in static equilibrium conned to a sealed rectilinear box in zero gravity.
Static Fluids
8.1.6: Pressure and Connement of Static Fluids
In gure 101 we see a box of a uid that is conned within the box by the rigid walls of the box. We
will imagine that this particular box is in free space far from any gravitational attractor and is
therefore at rest with no external forces acting on it. We know from our intuition based on things like
cups of coee that no matter how this uid is initially stirred up and moving within the container,
after a very long time the uid will damp down any initial motion by interacting with the walls of
the container and arrive at static equilibrium
132
.
A uid in static equilibrium has the property that every single tiny chunk of volume in the uid
has to independently be in force equilibrium the total force acting on the dierential volume chunk
must be zero. In addition the net torques acting on all of these dierential subvolumes must be zero,
and the uid must be at rest, neither translating nor rotating. Fluid rotation is more complex than
the rotation of a static object because a uid can be internally rotating even if all of the uid in the
outermost layer is in contact with a contain and is stationary. It can also be turbulent there can be
lots of internal eddies and swirls of motion, including some that can exist at very small length scales
and persist for fair amounts of time. We will idealize all of this when we discuss static properties
of uids we will assume that all of this sort of internal motion has disappeared.
We can now make a few very simple observations about the forces exerted by the walls of the
container on the uid within. First of all the mass of the uid in the box above is clearly:
M = V (696)
where V is the volume of the box. Since it is at rest and remains at rest, the net external force
exerted on it (only) by the the box must be zero (see Week 4). We drew a symmetric box to make
it easy to see that the magnitudes of the forces exerted by opposing walls are equal F
left
= F
right
(for example). Similarly the forces exerted by the top and bottom surfaces, and the front and back
surfaces, must cancel.
The average velocity of the molecules in the box must be zero, but the molecules themselves will
generally not be at rest at any nonzero temperature. They will be in a state of constant motion where
they bounce elastically o of the walls of the box, both giving and receiving an impulse (change in
momentum) from the walls as they do. The walls of any box large enough to contain many molecules
thus exerts a nearly continuous nonzero force that connes any uid not at zero temperature
133
.
132
This state will also entail thermodynamic equilibrium with the box (which must be at a uniform temperature)
and hence the uid in this particular non-accelerating box has a uniform density.
133
Or at a temperature low enough for the uid to freeze and becomes a solid
Week 8: Fluids 343
From this physical picture we can also deduce an important scaling property of the force exerted
by the walls. We have deliberately omitted giving any actual dimensions to our box in gure 101.
Suppose (as shown) the cross-sectional area of the left and right walls are A originally. Consider
now what we expect if we double the size of the box and at the same time add enough additional
uid for the uid density to remain the same, making the side walls have the area 2A. With twice
the area (and twice the volume and twice as much uid), we have twice as many molecular collisions
per unit time on the doubled wall areas (with the same average impulse per collision). The average
force exerted by the doubled wall areas therefore also doubles.
From this simple argument we can conclude that the average force exerted by any wall is propor-
tional to the area of the wall. This force is therefore most naturally expressible in terms of pressure,
for example:
F
left
= P
left
A = P
right
A = F
right
(697)
which implies that the pressure at the left and right conning walls is the same:
P
left
= P
right
= P (698)
, and that this pressure describes the force exerted by the uid on the walls and vice versa. Again,
the exact same thing is true for the other four sides.
There is nothing special about our particular choice of left and right. If we had originally drawn
a cubic box (as indeed we did) we can easily see that the pressure P on all the faces of the cube
must be the same and indeed (as we shall see more explicitly below) the pressure everywhere in the
uid must be the same!
Thats quite a lot of mileage to get out of symmetry and the denition of static equilibrium, but
there is one more important piece to get. This last bit involves forces exerted by the wall parallel to
its surface. On average, there cannot be any! To see why, suppose that one surface, say the left one,
exerted a force tangent to the surface itself on the uid in contact with that surface. An important
property of uids is that one part of a uid can move independent of another so the uid in at least
some layer with a nite thickness near the wall would therefore experience a net force and would
accelerate. But this violates our assumption of static equilibrium, so a uid in static equilibrium
exerts no tangential force on the walls of a conning container and vice versa.
We therefore conclude that the direction of the force exerted by a conning surface with an area
A on the uid that is in contact with it is:
F = P A n (699)
where n is an inward-directed unit vector perpendicular to (normal to) the surface. This nal rule
permits us to handle the force exerted on uids conned to irregular amoebic blob shaped containers,
or balloons, or bags, or well, us, by our skins and vascular system.
Note well that this says nothing about the tangential force exerted by uids in relative motion
to the walls of the conning container. We already know that a uid moving across a solid surface
will exert a drag force, and later this week well attempt to at least approximately quantify this.
Next, lets consider what happens when we bring this box of uid
134
down to Earth and consider
what happens to the pressure in a box in near-Earth gravity.
8.1.7: Pressure and Connement of Static Fluids in Gravity
The principle change brought about by setting our box of uid down on the ground in a gravitational
eld (or equivalently, accelerating the box of uid uniformly in some direction to develop a pseudo-
gravitational eld in the non-inertial frame of the box) is that an additional external force comes
134
Its just a box of rain. I dont know who put it there...
344 Week 8: Fluids
into play: The weight of the uid. A static uid, conned in some way in a gravitational eld, must
support the weight of its many component parts internally, and of course the box itself must
support the weight of the entire mass M of the uid.
As hopefully you can see if you carefully read the previous section. The only force available to
provide the necessary internal support or connement force is the variation of pressure within
the uid. We would like to know how the pressure varies as we move up or down in a static uid
so that it supports its own weight.
There are countless reasons that this knowledge is valuable. It is this pressure variation that
hurts your ears if you dive deep into the water or collapses submarines if they dive too far. It is this
pressure variation that causes your ears to pop as you ride in a car up the side of a mountain or
your blood to boil into the vacuum of space if you ride in a rocket all the way out of the atmosphere
without a special suit or vehicle that provides a personally pressurized environment. It is this
pressure variation that will one day very likely cause you to have varicose veins and edema in your
lower extremities from standing on your feet all day and can help treat/reverse both if you stand
in 1.5 meter deep water instead of air. The pressure variation drives water out of the pipes in your
home when you open the tap, helps lift a balloon lled with helium, oats a boat but fails to oat
a rock.
We need to understand all of this, whether our eventual goal is to become a physicist, a physician,
an engineer, or just a scientically literate human being. Lets get to it.
Heres the general idea. If we consider a tiny (eventually dierentially small) chunk of uid in
force equilibrium, gravity will pull it down and the only thing that can push it up is a pressure
dierence between the top and the bottom of the chunk. By requiring that the force exerted by the
pressure dierence balance the weight, we will learn how the pressure varies with increasing depth.
For incompressible uids, this is really all there is to it it takes only a few lines to derive a
lovely formula for the increase in pressure as a function of depth in an incompressible liquid.
For gases there is, alas, a small complication. Compressible uids have densities that increase
as the pressure increases. This means that boxes of the same size also have more mass in them as
one descends. More mass means that the pressure dierence has to increase, faster, which makes
the density/mass greater still, and one discovers (in the end) that the pressure varies exponentially
with depth. Hence the air pressure drops relatively quickly as one goes up from the Earths surface
to very close to zero at a height of ten miles, but the atmosphere itself extends for a very long way
into space, never quite dropping to zero even when one is twenty or a hundred miles high.
As it happens, the calculus for the two kinds of uids is the same up to a given (very important)
common point, and then diers, becoming very simple indeed for incompressible uids and a bit more
dicult for compressible ones. Simple solutions suce to help us build our conceptual understanding;
we will therefore treat incompressible uids rst and everybody is responsible for understanding
them. Physics majors, math majors, engineers, and people who love a good bit of calculus now
and then should probably continue on and learn how to integrate the simple model provided for
compressible uids.
In gure 102 a (portion of) a uid conned to a box is illustrated. The box could be a completely
sealed one with rigid walls on all sides, or it could be something like a cup or bucket that is open
on the top but where the uid is still conned there by e.g. atmospheric pressure.
Let us consider a small (eventually innitesimal) chunk of uid somewhere in the middle of the
container. As shown, it has physical dimensions x, y, z; its upper surface is a distance z below
the origin (where z increases down and hence can represent depth) and its lower surface is at
depth z +z. The areas of the top and bottom surfaces of this small chunk are e.g. A
tb
= xy,
the areas of the sides are xz and yz respectively, and the volume of this small chunk is
V = xyz.
Week 8: Fluids 345
z
z
x
y
F
l
F F
r
F
t
b
Fluid (density )
0
y
x
z
P(z + ) z)
z + z
P(z)
P(0) = P
0
mg
Figure 102: A uid in static equilibrium conned to a sealed rectilinear box in a near-Earth gravi-
tational eld g. Note well the small chunk of uid with dimensions x, y, z in the middle of the
uid. Also note that the coordinate system selected has z increasing from the top of the box down,
so that z can be thought of as the depth of the uid.
This small chunk is itself in static equilibrium therefore the forces between any pair of its
horizontal sides (in the x or y direction) must cancel. As before (for the box in space) F
l
= F
r
in magnitude (and opposite in their y-direction) and similarly for the force on the front and back
faces in the x-direction, which will always be true if the pressure does not vary horizontally with
variations in x or y. In the z-direction, however, force equilibrium requires that:
F
t
+ mg F
b
= 0 (700)
(where recall, down is positive).
The only possible source of F
t
and F
b
are the pressure in the uid itself which will vary
with the depth z: F
t
= P(z)A
tb
and F
b
= P(z +z)A
tb
. Also, the mass of uid in the (small)
box is m = V (using our ritual incantation the mass of the chunks is...). We can thus write:
P(z)xy +(xyz)g P(z + z)xy = 0 (701)
or (dividing by xyz and rearranging):
P
z
=
P(z + z) P(z)
z
= g (702)
Finally, we take the limit z 0 and identify the denition of the derivative to get:
dP
dz
= g (703)
Identical arguments but without any horizontal external force followed by x 0 and y 0 lead
to:
dP
dx
=
dP
dy
= 0 (704)
as well P does not vary with x or y as already noted
135
.
135
Physics and math majors and other students of multivariate calculus will recognize that I should probably be using
partial derivatives here and establishing that

P = g, where in free space we should instead have had

P = 0 P
constant.
346 Week 8: Fluids
In order to nd P(z) from this dierential expression (which applies, recall, to any conned uid
in static equilibrium in a gravitational eld) we have to integrate it. This integral is very simple if
the uid is incompressible because in that case is a constant. The integral isnt that dicult if
is not a constant as implied by the equation we wrote above for the bulk compressibility. We will
therefore rst do incompressible uids, then compressible ones.
8.1.8: Variation of Pressure in Incompressible Fluids
In the case of incompressible uids, is a constant and does not vary with pressure and/or depth.
Therefore we can easily multiple dP/dz = g above by dz on both sides and integrate to nd P:
dP = g dz
_
dP =
_
g dz
P(z) = gz +P
0
(705)
where P
0
is the constant of integration for both integrals, and practically speaking is the pressure
in the uid at zero depth (wherever that might be in the coordinate system chosen).
Example 8.1.1: Barometers
Mercury barometers had liquid mercury exposed to the open air, but liquid mercury is not particu-
larly toxic, and the amount of mercury gas emitted by the exposed surface of a mercury barometer
at room temperature is so miniscule that it is nearly harmless, probably more harmless, risk wise,
than the fumes emitted by the paint on interior walls, the carbon monoxide emitted by gas stoves,
the skin damage that results from a single sunburn (unless you pack the barometer into a tiny room
with poor ventilation and sit with it. The single biggest risk associated with uncontained liquid
mercury (in a barometer or otherwise) is that you can easily spill it, and once spilled it is fairly
likely to sooner or later make its way into either mercury vapor or methyl mercury, both of which
are biologically active and highly toxic. Liquid mercury itself you could drink a glass of and it would
pretty much pass straight through you with minimal absorption and little to no damage if you
um collected it carefully and disposed of it properly on the other side.
At this point mercury barometers are rapidly disappearing. Their manufacture is banned in the
U.S., Canada, Europe, and many other nations. We had a lovely one (probably more than one, but
I recall one) in the Duke Physics Department up until sometime in the 90s
136
, but it was sanely
enough, removed and retired during a renovation that also cleaned up most if not all of the asbestos
in the building. Ah, my toxic youth...
Still, at one time they were extremely common most ships had one, many households had one,
businesses and government agencies had them knowing the pressure of the air is an important
factor in weather prediction. Lets see how they work(ed).
A simple mercury barometer is shown in gure 103. It consists of a tube that is completely lled
with a uid, typically mercury (with a specic gravity of 13.546, hence a density of 13546 kg/m
3
).
The lled tube is then inverted into a small reservoir of mercury (although other designs of the
bottom are possible, some with smaller exposed surface area of the mercury). The mercury falls
(pulled down by gravity) out of the tube, leaving behind a vacuum at the top.
136
I used to work in the small, cramped space with poor circulation where it was located from time to time but never
very long at a time and besides, the room was cold. But if I seem mad as a hatter mercury nitrate was used in
the making of hats and the vapor used to poison the hatters vapor used to poison hat makers it probably isnt from
this...
Week 8: Fluids 347
P = 0
P = P
0
H
Figure 103: A simple uid barometer consists of a tube with a vacuum at the top lled with uid
supported by the air pressure outside.
We can easily compute the expected height of the mercury column if P
0
is the pressure on the
exposed surface of the mercury in the reservoir. In that case
P = P
0
+gz (706)
as usual for an incompressible uid. Applying this formula to both the top and the bottom,
P(0) = P
0
(707)
and
P(H) = P
0
gH = 0 (708)
(recall that the upper surface is above the lower one, z = H). From this last equation:
P
0
= gH (709)
and one can easily convert the measured height H of mercury above the top surface of mercury in
the reservoir into P
0
, the air pressure on the top of the reservoir.
At one atmosphere we get an approximate pressure, this is numerically:
P
0
= 13546 10 H = 1.3546 10
5
= 101325 Pa (710)
Dividing we nd the value of H expected at one standard atmosphere:
H
atm
= 763 millimeters (711)
There is actually yet another unit of pressure named after the inventor of the mercury barometer,
Evangelista Torricelli, who happened to be a secretary of Galileos. The torr is the pressure required
to push the mercury in the barometer approximately 1 mm.
Example 8.1.2: Variation of Oceanic Pressure with Depth
The pressure on the surface of the ocean is, approximately, by denition, one atmosphere. Water is
a highly incompressible uid with
w
= 1000 kilograms per cubic meter
137
. g 10 meters/second
2
.
Thus:
P(z) = P
0
+
w
gz =
_
10
5
+ 10
4
z
_
Pa (712)
137
Good number to remember. In fact, great number to remember.
348 Week 8: Fluids
or
P(z) = (1.0 + 0.1z) bar = (1000 + 100z) mbar (713)
Every ten meters of depth (either way) increases water pressure by (approximately) one atmosphere!
Wow, that was easy. This is a very important rule of thumb and is actually fairly easy to
remember! How about compressible uids?
8.1.9: Variation of Pressure in Compressible Fluids
Compressible uids, as noted, have a density which varies with pressure. Recall our equation for
the compressibility:
P = B
V
V
(714)
If one increases the pressure, one therefore decreases occupied volume of any given chunk of mass,
and hence increases the density. However, to predict precisely how the density will depend on
pressure requires more than just this it requires a model relating pressure, volume and mass.
Just such a model for a compressible gas is provided (for example) by the Ideal Gas Law
138
:
PV = Nk
b
T = nRT (715)
where N is the number of molecules in the volume V , k
b
is Boltzmanns constant
139
n is the number
of moles of gas in the volume V , R is the ideal gas constant
140
and T is the temperature in degrees
Kelvin (or Absolute)
141
. If we assume constant temperature, and convert N to the mass of the gas
by multiplying by the molar mass and dividing by Avogadros Number
142
6 10
23
.
(Aside: If youve never taken chemistry a lot of this is going to sound like Martian to you.
Sorry about that. As always, consider visting the e.g. Wikipedia pages linked above to learn enough
about these topics to get by for the moment, or just keep reading as the details of all of this wont
turn out to be very important...)
When we do this, we get the following formula for the density of an ideal gas:
=
M
RT
P (716)
where M is the molar mass
143
, the number of kilograms of the gas per mole. Note well that
this result is idealized thats why they call it the Ideal Gas Law! and that no real gases are
ideal for all pressures and temperatures because sooner or later they all become liquids or solids
due to molecular interactions. However, the gases that make up air are all reasonably ideal at
temperatures in the ballpark of room temperature, and in any event it is worth seeing how the
pressure of an ideal gas varies with z to get an idea of how air pressure will vary with height.
Nature will probably be somewhat dierent than this prediction, but we ought to be able to make
a qualitatively accurate model that is also moderately quantitatively predictive as well.
As mentioned above, the formula for the derivative of pressure with z is unchanged for compress-
ible or incompressible uids. If we take dP/dz = g and multiply both sides by dz as before and
138
Wikipedia: http://www.wikipedia.org/wiki/Ideal Gas Law.
139
Wikipedia: http://www.wikipedia.org/wiki/Boltzmanns Constant. ,
140
Wikipedia: http://www.wikipedia.org/wiki/Gas Constant. ,
141
Wikipedia: http://www.wikipedia.org/wiki/Temperature.
142
Wikipedia: http://www.wikipedia.org/wiki/Avogadros Number.
143
Wikipedia: http://www.wikipedia.org/wiki/Molar Mass.
Week 8: Fluids 349
integrate, now we get (assuming a xed temperature T):
dP = g dz =
Mg
RT
P dz
dP
P
=
Mg
RT
dz
_
dP
P
=
Mg
RT
_
dz
ln(P) =
Mg
RT
z +C
We now do the usual
144
exponentiate both sides, turn the exponential of the sum into the product
of exponentials, turn the exponential of a constant of integration into a constant of integration, and
match the units:
P(z) = P
0
e
(
Mg
RT
)z
(717)
where P
0
is the pressure at zero depth, because (recall!) z is measured positive down in our expression
for dP/dz.
Example 8.1.3: Variation of Atmospheric Pressure with Height
Using z to describe depth is moderately inconvenient, so let us dene the height h above sea
level to be z. In that case P
0
is (how about that!) 1 Atmosphere. The molar mass of dry air
is M = 0.029 kilograms per mole. R = 8.31 Joules/(mole-K
). Hence a bit of multiplication at

T = 300
:
Mg
RT
=
0.029 10
8.31 300
= 1.12 10
4
meters
1
(718)
or:
P(h) = 10
5
exp(0.00012 h) Pa = 1000 exp(0.00012 h) mbar (719)
Note well that the temperature of air is not constant as one ascends it drops by a fairly
signicant amount, even on the absolute scale (and higher still, it rises by an even greater amount
before dropping again as one moves through the layers of the atmosphere. Since the pressure is
found from an integral, this in turn means that the exponential behavior itself is rather inexact, but
still it isnt a terrible predictor of the variation of pressure with height. This equation predicts that
air pressure should drop to 1/e of its sea-level value of 1000 mbar at a height of around 8000 meters,
the height of the so-called death zone
145
. We can compare the actual (average) pressure at 8000
meters, 356 mbar, to 1000 e
1
= 368 mbar. We get remarkably good agreement!
This agreement rapidly breaks down, however, and meteorologists actually use a patchwork of
formulae (both algebraic and exponential) to give better agreement to the actual variation of air
pressure with height as one moves up and down through the various named layers of the atmosphere
with the pressure, temperature and even molecular composition of air varying all the way. This
simple model explains a lot of the variation, but its assumptions are not really correct.
144
Which should be familiar to you both from solving the linear drag problem in Week 2 and from the online Math
Review.
145
Wikipedia: http://www.wikipedia.org/wiki/Eects of high altitude on humans. This is the height where air pres-
sure drops to where humans are at extreme risk of dying if they climb without supplemental oxygen support beyond
this height hypoxia reduces ones ability to make important and life-critical decisions during the very last, most stress-
ful, part of the climb. Mount Everest (for example) can only be climbed with oxygen masks and some of the greatest
disasters that have occurred climbing it and other peaks are associated with a lack of or failure of supplemental
oxygen.
350 Week 8: Fluids
8.2: Pascals Principle and Hydraulics
We note that (from the above) the general form of P of a uid conned to a sealed container has
the most general form:
P(z) = P
0
+
_
z
0
gdz (720)
where P
0
is the constant of integration or value of the pressure at the reference depth z = 0. This
has an important consequence that forms the basis of hydraulics.
z
x
P
0
z
z
P(z)
Piston
F
F
p
Figure 104: A single piston seated tightly in a frictionless cylinder of cross-sectional area A is used
to compress water in a sealed container. Water is incompressible and does not signicantly change
its volume at P = 1 bar (and a constant room temperature) for pressure changes on the order of
0.1-100 bar.
Suppose, then, that we have an incompressible uid e.g. water conned within a sealed
container by e.g. a piston that can be pushed or pulled on to increase or decrease the connement
pressure on the surface of the piston. Such an arrangement is portrayed in gure 104.
We can push down (or pull back) on the piston with any total downward force F that we like
that leaves the system in equilibrium. Since the piston itself is in static equilibrium, the force we
push with must be opposed by the pressure in the uid, which exerts an equal and opposite upwards
force:
F = F
p
= P
0
A (721)
where A is the cross sectional area of the piston and where weve put the cylinder face at z = 0, which
we are obviously free to do. For all practical purposes this means that we can make P
0
anything
we like within the range of pressures that are unlikely to make water at room temperature change
its state or volume do other bad things, say P = (0.1, 100) bar.
The pressure at a depth z in the container is then (from our previous work):
P(z) = P
0
+gz (722)
where =
w
if the cylinder is indeed lled with water, but the cylinder could equally well be
lled with hydraulic uid (basically oil, which assists in lubricating the piston and ensuring that it
remains frictionless while assisting the seal), alcohol, mercury, or any other incompressible liquid.
Week 8: Fluids 351
We recall that the pressure changes only when we change our depth. Moving laterally does not
change the pressure, because e.g. dP/dx = dP/dy = 0. We can always nd a path consisting of
vertical and lateral displacements from z = 0 to any other point in the container two such points
at the same depth z are shown in 104, along with a (deliberately ziggy-zaggy
146
) vertical/horizontal
path connecting them. Clearly these two points must have the same pressure P(z)!
Now consider the following. Suppose we start with pressure P
0
(so that the pressure at these
two points is P(z), but then change F to make the pressure P
0
and the pressure at the two points
P
(z). Then:
P(z) = P
0
+gz
P
(z) = P
0
+gz
P(z) = P
(z) P(z) = P
0
P
0
= P
0
(723)
That is, the pressure change at depth z does not depend on z at any point in the uid! It depends
only on the change in the pressure exerted by the piston!
This result is known as Pascals Principle and it holds (more or less) for any compressible
uid, not just incompressible ones, but in the case of compressible uids the piston will move up or
down or in or out and the density of the uid will change and hence the treatment of the integral
will be too complicated to cope with. Pascals Principle is more commonly given in English words
as:
Any change in the pressure exerted at a given point on a conned uid is
transmitted, undiminished, throughout the uid.
Pascals principle is the basis of hydraulics. Hydraulics are a kind of uid-based simple machine
that can be used to greatly amplify an applied force. To understand it, consider the following gure:
Example 8.2.1: A Hydraulic Lift
m
M
A
A
F
mg
F
Mg
1
2
2
1
Figure 105: A simple schematic for a hydraulic lift of the sort used in auto shops to lift your car.
Figure 105 illustrates the way we can multiply forces using Pascals Principle. Two pistons seal o
a pair of cylinders connected by a closed tube that contains an incompressible uid. The two pistons
146
Because we can make the zigs and zags dierentially small, at which point this piecewise horizontal-vertical line
becomes an arbitrary curve that remain in the uid. Multivariate calculus can be used to formulate all of these results
more prettily, but the reasoning behind them is completely contained in the picture and this text explanation.
352 Week 8: Fluids
are deliberately given the same height (which might as well be z = 0, then, in the gure, although
we could easily deal with the variation of pressure associated with them being at dierent heights
since we know P(z) = P
0
+gz. The two pistons have cross sectional areas A
1
and A
2
respectively,
and support a small mass m on the left and large mass M on the right in static equilibrium.
For them to be in equilibrium, clearly:
F
1
mg = 0 (724)
F
2
Mg = 0 (725)
We also/therefore have:
F
1
= P
0
A
1
= mg (726)
F
2
= P
0
A
2
= Mg (727)
Thus
F
1
A
1
= P
0
=
F
2
A
2
(728)
or (substituting and cancelling g):
M =
A
2
A
1
m (729)
A small mass on a small-area piston can easily balance a much larger mass on an equally larger area
piston!
Just like a lever, we can balance or lift a large weight with a small one. Also just as was the case
with a lever, there aint no such thing as a free lunch! If we try to lift (say) a car with a hydraulic
lift, we have to move the same volume V = Az from under the small piston (as it descends) to
under the large one (as it ascends). If the small one goes down a distance z
1
and the large one goes
up a distance z
2
, then:
z
1
z
2
=
A
2
A
1
(730)
The work done by the two cylinders thus precisely balances:
W
2
= F
2
z
2
= F
1
A
2
A
1
z
2
= F
1
A
2
A
1
z
1
A
1
A
2
= F
1
z
1
= W
1
(731)
The hydraulic arrangement thus transforms pushing a small force through a large distance into
a large force moved through a small distance so that the work done on piston 1 matches the work
done by piston 2. No energy is created or destroyed (although in the real world a bit will be lost to
heat as things move around) and all is well, quite literally, with the Universe.
This example is pretty simple, but it should suce to guide you through doing a work-energy
conservation problem where (for example) the mass m goes down a distance d (losing gravitational
energy) and the mass M goes up a distance D (gaining gravitational energy while the uid itself also
is net moved up above its former level! Dont forget that last, tricky bit if you ever have a problem
like that!
8.3: Fluid Displacement and Buoyancy
First, a story. Archimedes
147
was, quite possibly, the smartest person who has ever lived (so far).
His day job was being the court magician in the island kingdom of Syracuse in the third century
147
Wikipedia: http://www.wikipedia.org/wiki/Archimedes. A very, very interesting person. I strongly recommend
that my students read this short article on this person who came within a hair of inventing physics and calculus
and starting the Enlightenment some 1900 years before Newton. Scary supergenius polymath guy. Would have won
multiple Nobel prizes, a Macarthur Genius grant, and so on if alive today. Arguably the smartest person who has
ever lived so far.
Week 8: Fluids 353
BCE, some 2200 years ago; in his free time he did things like invent primitive integration, accurately
compute pi, invent amazing machines of war and peace, determine the key principles of both statics
and uid statics (including the one we are about to study and the principles of the lever Give
me put a place to stand and I can move the world! is a famous Archimedes quote, implying that
a suciently long lever would allow the small forces humans can exert to move even something as
large as the Earth, although yeah, there are a few problems with that that go beyond just a place
to stand
148
).
The king (Hieron II) of Syracuse had a problem. He had given a goldsmith a mass of pure gold
to make him a votive crown, but when the crown came back he had the niggling suspicion that
the goldsmith had substituted cheap silver for some of the gold and kept the gold. It was keeping
him awake at nights, because if somebody can steal from the king and get away with it (and word
gets out) it can only encourage a loss of respect and rebellion.
So he called in his court magician (Archimedes) and gave him the task of determining whether
or not the crown had been made by adulterated gold or else. And oh, yeah you cant melt down
the crown and cast it back into a regular shape whose dimensions can be directly compared to the
same shape of gold, permitting a direct comparison of their densities (the density of pure gold is
not equal to the density of gold with an admixture of silver). And dont forget the or else.
Archimedes puzzled over this for some days, and decided to take a bath and cool o his overheated
brain. In those days, baths were large public aairs you went to the baths as opposed to having
one in your home where a lled tub was provided, sometimes with attendants happy to help you
wash. As the possibly apocryphal story has it, Archimedes lowered himself into the overfull tub
and as he did so, water sloshed out as he displaced its volume with his own volume. In an intuitive,
instantaneous ash of insight a light bulb moment he realized that displacement of a liquid
by an irregular shaped solid can be used to measure its volume, and that such a measurement of
displaced volume would allow the kings problem to be solved.
Archimedes then leaped out of the tub and ran naked through the streets of Syracuse (which we
can only imagine provided its inhabitants with as much amusement then as it would provide now)
yelling Eureka!, which in Greek means I have found it! The test (two possible versions of which
are supplied below, one more probable than the other but less instructive for our own purposes) was
performed, and revealed that the goldsmith was indeed dishonest and had stolen some of the kings
gold. Bad move, goldsmith! We will draw a tasteful veil over the probable painful and messy fate
of the goldsmith.
Archimedes transformed his serendipitous discovery of static uid displacement into an elaborate
physical principle that explained buoyancy, the tendency of uids to support all or part of the weight
of objects immersed in them.
The fate of Archimedes himself is worth a moment more of our time. In roughly 212 BCE, the
Romans invaded Syracuse in the Second Punic War after a two year siege. As legend has it, as the
city fell and armed soldiers raced through the streets subduing the population as only soldiers can,
Archimedes was in his court chambers working on a problem in the geometry of circles, which he
had drawn out in the sand boxes that then served as a chalkboard. A Roman soldier demanded
that he leave his work and come meet with the conquering general, Marcus Claudius Marcellus.
Archimedes declined, replying with his last words Do not disturb my circles and the soldier killed
him. Bad move, soldier Archimedes himself was a major part of the loot of the city and Marcellus
had ordered that he was not to be harmed. The fate of the soldier that killed him is unknown, but
it wasnt really a very good idea to anger a conquering general by destroying an object or person of
enormous value, and I doubt that it was very good.
Anyway, lets see the modern version of Archimedes discovery and see as well how Archimedes
148
The sound bite is hardly a modern invention, after all. Humans have always loved a good, pithy statement of
insight, even if it isnt actually even approximately true...
354 Week 8: Fluids
very probably used it to test the crown.
8.3.1: Archimedes Principle
Block of mass m
z
z
x
y
F
l
F F
r
F
t
b
Fluid (density )
0
y
x
z
P(z + ) z)
z + z
P(z)
P(0) = P
0
mg
Figure 106: A solid chunk of stu of mass m and the dimensions shown is immersed in a uid of
density at a depth z. The vertical pressure dierence in the uid (that arises as the uid itself
becomes static static) exerts a vertical force on the cube.
If you are astute, you will note that gure 106 is exactly like gure 102 above, except that the
internal chunk of uid has been replace by some other material. The point is that this replacemend
does not matter the net force exerted on the cube by the uid is the same!
Hopefully, that is obvious. The net upward force exerted by the uid is called the buoyant
force F
b
and is equal to:
F
b
= P(z + z)xy P(z)xy
= ((P
0
+g(z + z)) (P
0
+gz)) xy
= gzxy
= gV (732)
where V is the volume of the small block.
The buoyant force is thus the weight of the uid displaced by this single tiny block. This is
all we need to show that the same thing is true for an arbitrary immersed shape of object.
In gure 107, an arbitrary blob-shape is immersed in a uid (not shown) of density . Imagine
that weve taken a french-fry cutter and cuts the whole blob into nice rectangular segments, one of
which (of length h and cross-sectional area A) is shown. We can trim or average the end caps
so that they are all perfectly horizontal by making all of the rectangles arbitrarily small (in fact,
dierentially small in a moment). In that case the vertical force exerted by the uid on just the two
lightly shaded surfaces shown would be:
F
d
= P(z)A (733)
F
u
= P(z +h)A (734)
where we assume the upper surface is at depth z (this wont matter, as well see in a moment). Since
P(z +h) = P(z) +gh, we can nd the net upward buoyant force exerted on this little cross-section
Week 8: Fluids 355
h
A
A
A
F = g h A = g V
b
(up)
F = P(z + h)
u
F = P(z)
d
Figure 107: An arbitrary chunk of stu is immersed in a uid and we consider a vertical cross section
with horizontal ends of area A and height h through the chunk.
by subtracting the rst from the second:
F
b
= F
u
F
d
= g hA = g V (735)
where the volume of this piece of the entire blob is V = h A.
We can now let A dA, so that V > dV , and write
F
b
=
_
dF
b
=
_
V of blob
g dV = gV = m
f
g (736)
where m
f
= V is the mass of the uid displaced, so that m
f
g is its weight.
That is:
The total buoyant force on the immersed object is the weight of the uid
displaced by the object.
This is really an adequate proof of this statement, although if we were really going to be picky wed
use the fact that P doesnt vary in x or y to show that the net force in the x or y direction is
zero independent of the shape of the blob, using our dierential french-fry cutter mentally in the x
direction and then noting that the blob is arbitrary in shape and we could have just as easily labelled
or oriented the blob with this direction called y so it must be true in any direction perpendicular to
g.
This statement in the English or algebraic statement as you prefer is known as Archimedes
Principle, although Archimedes could hardly have formulated it quite the way we did algebraically
above as he died before he could quite nish inventing the calculus and physics.
This principle is enormously important and ubiquitous. Buoyancy is why boats oat, but rocks
dont. It is why childrens helium-lled balloons do odd things in accelerating cars. It exerts a subtle
force on everything submerged in the air, in water, in beer, in liquid mercury, as long as the uid
itself is either in a gravitational eld (and hence has a pressure gradient) or is in an accelerating
container with its own pseudogravity (and hence has a pressure gradient).
Lets see how Archimedes could have used this principle to test the crown two ways. The rst way
is very simple and conceptually instructive; the second way is more practical to us as it illustrates
the way we generally do algebra associated with buoyancy problems.
Example 8.3.1: Testing the Crown I
The tools Archimedes probably had available to him were balance-type scales, as these tools for
comparatively measuring the weight were well-known in antiquity. He certainly had vessels he could
356 Week 8: Fluids
ll with water. He had thread or string, he had the crown itself, and he had access to pure gold
from the kings treasury (at least for the duration of the test.
a
mg mg
mg
mg
F
b
(crown)
b
F (gold)
b
?
Figure 108: In a), the crown is balanced against an equal weight/mass of pure gold in air. In b) the
crown and the gold are symmetrically submerged in containers of still water.
Archimedes very likely used his balance to rst select and trim a piece of gold so it had exactly
the same weight as the crown as illustrated in gure 108a. Then all he had to do was submerge the
crown and the gold symmetrically in two urns lled with water, taking care that they are both fully
underwater.
Pure gold is more dense than gold adulterated with silver (the most likely metal the goldsmith
would have used; although a few others such as copper might have also been available and/or used
they are also less dense than gold). This means that any given mass/weight (in air, with its negligible
buoyant force) of adulterated gold would have a greater volume than an equal mass/weight (in
air) of pure gold.
If the crown were made of pure gold, then, the buoyant forces acting on the gold and the crown
would be equal. The weights of the gold and crown are equal. Therefore the submerged crown and
submerged gold would be supported in static equilibrium by the same force on the ropes, and the
balance would indicate equal (the indicator needle straight up). The goldsmith lives, the king is
happy, Archimedes lives, everybody is happy.
If the crown is made of less-dense gold alloy, then its volume will be greater than that of pure
gold. The buoyant force acting on it when submerged will therefore also be greater, so the tension
in the string supporting it needed to keep it in static equilibrium will be smaller.
But this smaller tension then would fail to balance the torque exerted on the balance arms by
the string attached to the gold, and the whole balance would rotate to the right, with the more
dense gold sinking relative to the less dense crown. The balance needle would not read equal. In
the story, it didnt read equal. So sad for the goldsmith.
Example 8.3.2: Testing the Crown II
Of course nowadays we dont do things with balance-type scales so often. More often than not
we would use a spring balance to weigh something from a string. The good thing about a spring
balance is that you can directly read o the weight instead of having to delicately balance some force
or weight with masses in a counterbalance pan. Using such a balance (or any other accurate scale)
we can measure and record the density of pure gold once and for all.
Let us imagine that we have done so, and discovered that:
Au
= 19300 kilograms/meter
3
(737)
Week 8: Fluids 357
For grins, please note that
Ag
3
. This is a bit over half the density of
gold, so that adulterating the gold of the crown with 10% silver would have decreased its density
by around 5%. If the mass of the crown was (say) a kilogram, the goldsmith would have stolen 100
grams almost four ounces of pure gold at the cost of 100 grams of silver. Even if he stole twice
that, the 9% increase in volume would have been nearly impossible to directly observe in a worked
piece. At that point the color of the gold would have been o, though. This could be remedied
by adding copper (
Cu
3
) along with the silver. Gold-Silver-Copper all
three alloy together, with silver whitening and yellowing the natural color of pure gold and copper
reddening it, but with the two balanced one can create an alloy that is perhaps 10% each copper
and silver that has almost exactly the same color as pure gold. This would harden and strengthen
the gold of the crown, but youd have to damage the crown to discover this.
mg mg
F
b
(crown)
T
a
T
w
a b
Figure 109: We now measure the eective weight of the one crown both in air (very close to its true
weight) and in water, where the measured weight is reduced by the buoyant force.
Instead we hang the crown (of mass m) as before, but this time from a spring balance, both in
air and in the water, recording both weights as measured by the balance (which measures, recall, the
tension in the supporting string). This is illustrated in gure 109, where we note that the measured
weights in a) and b) are T
a
, the weight in air, and T
w
, the measured weight while immersed in water.
Lets work this out. a) is simple. In static equilibrium:
T
a
mg = 0
T
a
= mg
T
a
=
crown
V g (738)
so the scale in a) just measures the almost-true weight of the crown (o by the buoyant force
exerted by the air which, because the density of air is very small at
air
1.2 kilograms/meter
3
,
which represents around a 0.1% error in the measured weight of objects roughly the density of water,
and an even smaller error for denser stu like gold).
In b):
T
w
+F
b
mg = 0
T
w
= mg F
b
=
crown
V g
water
V g
= (
crown
water
)V g (739)
We know (we measured) the values of T
a
and T
w
, but we dont know V or
crown
. We have two
equations and two unknowns, and we would like most of all to solve for
crown
. To do so, we divide
358 Week 8: Fluids
these two equations by one another to eliminate the V :
T
w
T
a
=

crown
water
crown
(740)
Whoa! g went away too! This means that from here on we dont even care what g is we could
make these weight measurements on the moon or on mars and wed still get the relative density of
the crown (compared to the density of water) right!
A bit of algebra-fu:
water
=
crown
(1
T
w
T
a
) =
crown
T
a
T
w
T
a
(741)
or nally:
crown
=
water
T
a
T
a
T
w
(742)
We are now prepared to be precise. Suppose that the color of the crown is very good. We
perform the measurements above (using a scale accurate to better than a hundredth of a Newton or
we might end up condemning our goldsmith due to a measurement error! ) and nd that T
a
= 10.00
Newtons, T
w
= 9.45 Newtons. Then
crown
= 1000
10.00
10.00 9.45
3
(743)
We subtract, 1930018182 = 1118; divide, 1118/19300100 = 6%. Our crowns material is around
six percent less dense than gold which means that our clever goldsmith has adulterated the gold by
removing some 12% of the gold (give or take a percent) and replace it with some mixture of silver
and copper. Baaaaad goldsmith, bad.
If the goldsmith were smart, of course, he could have beaten Archimedes (and us). What he
needed to do is adulterate the gold with a mixture of metals that have exactly the same density
as gold! Not so easy to do, but tungstens density,
W
= 19300 (to three digits) almost exactly
matches that of gold. Alas, it has the highest melting point of all metals at 3684
K, is enormously
hard, and might or might not alloy with gold or change the color of the gold if alloyed. It is also
pretty expensive in its own right. Platinum, Plutonium, Iridium, and Osmium are all even denser
then gold, but three of these are very expensive (even more expensive than gold!) and one is very
explosive, a transuranic compound used to make nuclear bombs, enormously expensive and illegal
to manufacture or own (and rather toxic as well). Not so easy, matching the density via adulteration
and making a prot out of it...
Enough of all of this uid statics. Time to return to some dynamics.
8.4: Fluid Flow
In gure 110 we see uid owing from left to right in a circular pipe. The pipe is assumed to be
frictionless for the time being to exert no drag force on the uid owing within and hence all
of the uid is moving uniformly (at the same speed v with no relative internal motion) in a state of
dynamic equilibrium.
We are interested in understanding the ow or current of water carried by the pipe, which we
will dene to be the volume per unit time that passes any given point in the pipe. Note well that
we could instead talk about the mass per unit time that passes a point, but this is just the volume
per unit time times the density and hence for uids with a more or less uniform density the two are
the same within a constant.
For this reason we will restrict our discussion in the following to incompressible uids, with
constant . This means that the concepts we develop will work gangbusters well for understanding
Week 8: Fluids 359
v
vt
A
V
Figure 110: Fluid in uniform ow is transported down a pipe with a constant cross-section at a
constant speed v. From this we can easily compute the ow, the volume per unit time that passes
(through a surface that cuts the pipe at) a point on the pipe.
water owing in pipes, beer owing from kegs, blood owing in veins, and even rivers owing slowly
in not-too-rocky river beds but not so well to describe the dynamical evolution of weather patterns
or the movement of oceanic currents. The ideas will still be extensible, but future climatologists or
oceanographers will have to work a bit harder to understand the correct theory when dealing the
compressibility.
We expect a big pipe (one with a large cross-sectional area) to carry more uid per unit time,
all other things being equal, than a small pipe. To understand the relationship between area,
speed and ow we turn our attention to gure 110. In a time t, all of the water within a distance
vt to the left of the second shaded surface (which is strictly imaginary there is nothing actually
in that pipe at that point but uid) will pass through this surface and hence past the point indicated
by the arrow underneath. The volume of this uid is just the area of the surface times the height of
the cylinder of water:
V = Avt (744)
If we divide out the t, we get:
I =
V
t
= Av (745)
This, then is the ow, or volumetric current of uid in the pipe.
This is an extremely important relation, but the picture and derivation itself is arguably even
more important, as this is the rst time but not the last time you have seen it, and it will
be a crucial part of understanding things like ux and electric current in the second semester
of this course. Physics and math majors will want to consider what happens when they take the
quantity v and make it a vector eld v that might not be owing uniformly in the pipe, which might
not have a uniform shape or cross section, and thence think still more generally to uids owing
in arbitrary streamlined patterns. Future physicians, however, can draw a graceful curtain across
these meditations for the moment, although they too will benet next semester if they at least try
to think about them now.
8.4.1: Conservation of Flow
Fluid does not, of course, only ow in smooth pipes with a single cross-sectional area. Sometimes it
ows from large pipes into smaller ones or vice versa. We will now proceed to derive an important
aspect of that ow for incompressible uids and/or steady state ows of compressible ones.
Figure 111 shows a uid as it ows from just such a wider pipe down a gently sloping neck into a
narrower one. As before, we will ignore drag forces and assume that the ow is as uniform as possible
360 Week 8: Fluids
V
1
A
P
1
v
1
P
2
v
2
A
2
t
1
v
v
2
t
1
2
V (constant)
Figure 111: Water ows from a wider pipe with a larger cros-sectional area A
1
into a narrower
pipe with a smaller cross-sectional area A
2
. The speed of the uid in the wider pipe is v
1
, in the
narrower one it is v
2
. The pressure in the wider pipe is P
1
, in the narrower one it is P
2
.
as it narrows, while remaining completely uniform in the wider pipe and smaller pipe on either side
of the neck. The pressure, speed of the (presumed incompressible) uid, and cross sectional area for
either pipe are P
1
, v
1
, and A
1
in the wider one and P
2
, v
2
, and A
2
in the narrower one.
Pay careful attention to the following reasoning. In a time t then as before a volume of
uid V = A
1
v
1
t passes through the surface/past the point 1 marked with an arrow in the gure.
In the volume between this surface and the next grey surface at the point 2 marked with an arrow
no uid can build up so actual quantity of mass in this volume must be a constant.
This is very important. The argument is simple. If more uid owed into this volume through the
rst surface than escaped through the second one, then uid would be building up in the volume.
This would increase the density. But the uids density cannot change it is (by hypothesis)
incompressible. Nor can more uid escape through the second surface than enters through the rst
one.
Note well that this assertion implies that the uid itself cannot be created or destroyed,
it can only ow into the volume through one surface and out through another, and because it is
incompressible and uniform and the walls of the vessel are impermeable (dont leak) the quantity of
uid inside the surface cannot change in any other way.
This is a kind of conservation law which, for a continuous uid or similar medium, is called a
continuity equation. In particular, we are postulating the law of conservation of matter, implying a
continuous ow of matter from one place to another! Strictly speaking, continuity alone would permit
uid to build up in between the surfaces (as this can be managed without creating or destroying the
mass of the uid) but weve trumped that by insisting that the uid be incompressible.
This means that however much uid enters on the left must exit on the right in the time t;
the shaded volumes on the left and right in the gure above must be equal. If we write this out
algebraically:
V = A
1
v
1
t = A
2
v
2
t
I =
V
t
= A
1
v
1
= A
2
v
2
(746)
Thus the current or ow through the two surfaces marked 1 and 2 must be the same:
A
1
v
1
= A
2
v
2
(747)
Obviously, this argument would continue to work if it necked down (or up) further into a pipe
with cross sectional area A
3
, where it had speed v
3
and pressure P
3
, and so on. The ow of water
in the pipe must be uniform, I = Av must be a constant independent of where you are in the pipe!
Week 8: Fluids 361
There are two more meaty results to extract from this picture before we move on, that combine
into one named phenomenon. The rst is that conservation of ow implies that the uid speeds
up when it ows from a wide tube and into a narrow one or vice versa, it slows down when it enters
a wider tube from a narrow one. This means that every little chunk of mass in the uid on the right
is moving faster than it is on the left. The uid has accelerated!
Well, by now you should very well appreciate that if the uid accelerates then there must be a
net external force that acts on it. The only catch is, where is that force? What exerts it?
The force is exerted by the pressure dierence P between P
1
and P
2
. The force exerted by
pressure at the walls of the container points only perpendicular to the pipe at that point; the uid
is moving parallel to the surface of the pipe and hence this normal conning force does no work
and cannot speed up the uid.
In a bit we will work out quantitatively how much the uid speeds up, but even now we can see
that since A
1
> A
2
, it must be true that v
2
> v
1
, and hence P
1
> P
2
. This is a general result, which
we state in words:
The pressure decreases in the direction that uid velocity increases.
This might well be stated (in other books or in a paper you are reading) the other way: When a
uid slows down, the pressure in it increases. Either way the result is the same.
This result is responsible for many observable phenomena, notably the mechanism of the lift that
supports a frisbee or airplane wing or the Magnus eectWikipedia: http://www.wikipedia.org/wiki/Magnus
that causes a spinning thrown baseball ball to curve.
Unfortunately, treating these phenomena quantitatively is beyond, and I do mean way beyond,
the scope of this course. To correctly deal with lift for compressible or incompressible uids one
must work with and solve either the Euler equations
149
, which are coupled partial dierential
equations that express Newtons Laws for uids dynamically moving themselves in terms of the
local density, the local pressure, and the local uid velocity, or the Navier-Stokes Equations
150
, ditto but including the eects of viscosity (neglected by Euler). Engineering students (especially
those interested in aerospace engineering and real uid dynamics) and math and physics majors are
encouraged to take a peek at these articles, but not too long a peek lest you decide that perhaps
majoring in advanced basket weaving really was the right choice after all. They are really, really
dicult; on the high end supergenius dicult
151
.
This isnt surprising the equations have to be able to describe every possible dynamical state
of a uid as it ows in every possible environment laminar ow, rotational ow, turbulence, drag,
around/over smooth shapes, horribly not smooth shapes, and everything in between. At that, they
dont account for things like temperature and the mixing of uids and uid chemistry reality is
more complex still. Thats why we are stopping with the simple rules above uid ow is conserved
(safe enough) and pressure decreases as uid velocity increases, all things being equal.
All things are, of course, not always equal. In particular, one thing that can easily vary in the
case of uid owing in pipes is the height of the pipes. The increase in velocity caused by a pressure
dierential can be interpreted or predicted by the Work-Kinetic Energy theorem, but if the uid is
moving up or down hill then we may discover that gravity is doing work as well!
In this case we should really use the Work-Mechanical Energy theorem to determine how pressure
changes can move uids. This is actually pretty easy to do, so lets do it.
149
Wikipedia: http://www.wikipedia.org/wiki/Euler Equations (uid dynamics).
150
Wikipedia: http://www.wikipedia.org/wiki/Navier-Stokes equations.
151
To give you an idea of how dicult they are, note that there is a $1,000,000 prize just for showing that solutions
to the 3 dimensional Navier-Stokes equations generally exist and/or are not singular.
362 Week 8: Fluids
8.4.2: Work-Mechanical Energy in Fluids: Bernoullis Equation
Daniel Bernoulli was a third generation member of the famous Bernoulli family
152
who worked on
(among many other things) uid dynamics, along with his good friend and contemporary, Leonhard
Euler. In 1738 he published a long work wherein he developed the idea of energy conservation to
uid motion. Well try to manage it in a page or so.
v
v
y
y
1
2
2
V
V
1
P
2
P
1
1
F
2
F
D
d
A
A
1
2
Figure 112: A circular cross-sectional necked pipe is arranged so that the pipe changes height between
the larger and smaller sections. We will assume that both pipe segments are narrow compared to the
height change, so that we dont have to account for a potential energy dierence (per unit volume)
between water owing at the top of a pipe compared to the bottom, but for ease of viewing we do
not draw the picture that way.
In gure 112 we see the same pipe we used to discuss conservation of ow, only now it is bent
uphill so the 1 and 2 sections of the pipe are at heights y
1
and y
2
respectively. This really is the
only change, otherwise we will recapitulate the same reasoning. The uid is incompressible and the
pipe itself does not leak, so uid cannot build up between the bottom and the top. As the uid on
the bottom moves to the left a distance d (which might be v
1
t but we dont insist on it as rates
will not be important in our result) exactly the same amount uid must move to the left a distance
D up at the top so that uid is conserved.
The total mechanical consequence of this movement is thus the disappearance of a chunk of uid
mass:
m = V = A
1
d = A
2
D (748)
that is moving at speed v
1
and at height y
1
at the bottom and its appearance moving at speed v
2
and at height y
2
at the top. Clearly both the kinetic energy and the potential energy of this chunk
of mass have changed.
What caused this change in mechanical energy? Well, it can only be work. What does the
work? The walls of the (frictionless, drag free) pipe can do no work as the only force it exerts is
perpendicular to the wall and hence to v in the uid. The only thing left is the pressure that acts
on the entire block of water between the rst surface (lightly shaded) drawn at both the top and
152
Wikipedia: http://www.wikipedia.org/wiki/Bernoulli family. The Bernoullis were in on many of major math-
ematical and physical discoveries of the eighteenth and nineteenth century. Calculus, number theory, polynomial
algebra, probability and statistics, uid dynamics if a theorem, distribution, principle has the name Bernoulli on
it, its gotta be good...
Week 8: Fluids 363
the bottom as it moves forward to become the second surface (darkly shaded) drawn at the top and
the bottom, eecting this net transfer of mass m.
The force F
1
exerted to the right on this block of uid at the bottom is just F
1
= P
1
A
1
; the force
F
2
exerted to the left on this block of uid at the top is similarly F
2
= P
2
A
2
. The work done by
the pressure acting over a distance d at the bottom is W
1
= P
1
A
1
d, at the top it is W
2
= P
2
A
2
D.
The total work is equal to the total change in mechanical energy of the chunk m:
W
tot
= E
mech
W
1
+W
2
= E
mech
(final) E
mech
(initial)
P
1
A
1
d P
2
A
2
D = (
1
2
mv
2
2
+ mgy
2
) (
1
2
mv
2
1
+ mgy
1
)
(P
1
P
2
)V = (
1
2
V v
2
2
+V gy
2
) (
1
2
V v
2
1
+V gy
1
)
(P
1
P
2
) = (
1
2
v
2
2
+gy
2
) (
1
2
v
2
1
+y
1
)
P
1
+
1
2
v
2
1
+y
1
= P
2
+
1
2
v
2
2
+gy
2
= a constant (units of pressure) (749)
There, that wasnt so dicult, was it? This lovely result is known as Bernoullis Principle
(or the Bernoulli uid equation). It contains pretty much everything weve done so far except con-
servation of ow (which is a distinct result, for all that we used it in the derivation) and Archimedes
Principle.
For example, if v
1
= v
2
= 0, it describes a static uid:
P
2
P
1
= g(y
2
y
1
) (750)
and if we change variables to make z (depth) y (negative height) we get the familiar:
P = gz (751)
for a static incompressible uid. It also not only tells us that pressure drops where uid velocity
increases, it tells us how much the pressure drops when it increases, allowing for things like the uid
owing up or downhill at the same time! Very powerful formula, and all it is is the Work-Mechanical
Energy theorem (per unit volume, as we divided out V in the derivation, note well) applied to the
uid!
Example 8.4.1: Emptying the Iced Tea
8.4.3: Fluid Viscosity and Resistance
In the discussion above, we have consistently ignored viscosity and drag, which behave like friction,
exerting a force parallel to the conning walls of the pipe in the opposite direction to the relative
motion of uid and pipe. In laminar ow, a layer of the uid sticks to the wall and does not move,
and the viscosity of the uid describes the way shear velocity builds up as one goes from the wall
of the pipe (velocity zero) to the center of the pipe (maximum velocity). If the uid is thick and
sticky (has a large viscosity), uid in the middle is still experiencing signicant backwards force
slowing it down, transmitted from the walls to the uid there. If the uid is thin and slippery (low
visocosity) then uid even a short distance away from the wall is moving rapidly even thought the
uid on the wall itself isnt moving.
In the absence of any driving force, this drag force will bring uid owing in a pipe to rest quite
rapidly. To keep it moving, then, requires the continuous application of some driving force. This
force, as we shall see, has to maintain a pressure gradient that pushes the uid through the pipe
364 Week 8: Fluids
from high pressure to low pressure just enough to overcome drag/friction and keep the uid owing
at a constant speed.
To correctly derive all of this, even for the simplest of geometries, is beyond the scope of this
course. It isnt horribly dicult for a circular pipe, but it requires a treatment of shear stress and
viscosity for laminar ow and we dont yet know what shear stress is. Also, the algebra is a bit
involved.
Instead Im going to invoke my instructors privilege (again, but this is pretty close tot he last
time) to give you an important result, one that Id like you to learn even though I do not derive
it. I only do this two or three times in this course, and this is, sadly, one of them. To make up for
it I will wave my hands and squawk a bit out the result instead, so that you at least conceptually
understand where the result comes from and how things scale.
In gure 113 a circular pipe is carrying a uid with viscosity from left to right at a constant
speed. Once again, this is a sort of dynamic equilibrium; the net force on the uid in the pipe
segment shown must be zero for the speed of the uid through it to be maintained unabated during
the ow.
The uid is in contact with and interacts with the walls of the pipe, creating a thin layer of
uid at least a few atoms thick that are at rest, stuck to the pipe. As uid is pushed through
the pipe, this layer at rest interacts with and exerts an opposing force on the layer moving just
above it via the viscosity of the uid. This layer in turn interacts with and slows the layer above it
and so on right up to the center of the pipe, where the uid ows most rapidly. The uid ow thus
forms cylindrical layers of constant speed, where the speed increases more or less smoothly from
zero where it is contact with the pipe to a peak speed in the middle. The layers are the laminae of
laminar ow.
L
P P
F
F
F F
F F
A A
1
F F
2
2 1
r
v
Figure 113: A circular pipe with friction carrying a uid with viscosity in other words, a real
pipe. This can be a model for everything from household plumbing to the blood vessels of the
human circulatory system, within reason.
The interaction of the surface layer with the uid, redistributed to the whole uid via the viscosity,
exerts a net opposing force on the uid as it moves through the pipe. In order for the average
speed of the uid to continue, an outside force must act on it with an equal and opposite force. The
only available source of this force in the gure is obviously the uid pressure; if it is larger on the
left than on the right (as shown) it will exert a net force on the uid in between that can balance
the drag force exerted by the walls.
The forces at the ends are F
1
= P
1
A, F
2
= P
2
A. The net force acting on the uid mass is thus:
F = F
1
F
2
= (P
1
P 2)A (752)
All things being equal, we expect the ow rate to increase linearly with v, and for laminar ow, the
drag force is proportional to v. Therefore we expect that:
F = F
d
v I (the ow) (753)
Week 8: Fluids 365
We can then divide out the area and write:
P
I
A
(754)
Since we cannot derive the constant of proportionality in this expression without doing Evil
Math Magic
153
well save putting the constants of proportionality in until the end, but we can
give whats called a hand waving argument and look at how we expect P to scale with the
variables that describe the problem. Hand-waving arguments are actually very important in
physics, as we can often use a mix of intuition and dimensional analysis and scaling to guess the
right form of a relation to a remarkably accurate degree.
Suppose we had two identical segments of pipe, one right after the other, carrying the same uid
ow. The rst pipe needs a drop of P in order to maintain ow I; so does the second. When
we put one right after the other, then, we expect the total pressure dierence required to overcome
drag to be twice P. From this, we expect the drag force to scale linearly with the length of the
pipe; if the pipe is twice as long we need twice the pressure dierence to maintain ow, half as long
we need half the pressure dierence. This means that we expect an L (to the rst power) on the top
in the equation for P.
Next, we expect P (for constant I) to increase monotonically with the viscosity . Since
the viscosity increases the stickiness and distance the static layers reaction force is extended into
the uid, we cant easily imagine any circumstances where the pressure required to push treacle
through a pipe would be less than the pressure required to push plain water. Unfortunately there
are an innite number of monotonically increasing functions of available, all heuristically possible.
Fortunately all of them have a Taylor Series expansion with a leading linear term so it seems
reasonable to at least try a linear dependence (which turns out to work well physically throughout
the laminar ow region right up to where the Reynolds number for the uid ow indicates a yes,
highly nonlinear transition from laminar/linear drag to nonlinear drag, as we would expect from
our Week 2 discussion on drag). So well stick an on top.
Finally, suppose we have two identical pipe segments, each carrying identical ow I of identical
uids across identical lengths L through identical cross-sectional areas with identical force dier-
ence F (Note well: not P) across the pipes. If we put them side by side, two pipes carry
twice as much uid we already know that the ow itself scales with the area of the aperture. We
therefore expect the ow itself to double if we double the cross-sectional area at constant force
dierence, and hence we expect to need half the force to maintain the same ow if we double the
area at the same force dierence. This puts another factor of A, the cross-sectional area of
the pipe, on the bottom.
If we put all of this together, our expression for P will look like:
P
IL
A
2
I
_
L
2
r
4
_
(755)
All thats missing is the constant of proportionality. Note that all of our scaling arguments
above would work for almost any cross-sectional shape of pipe there is nothing about them that
absolutely requires circular pipes. We rather expect that the constant of proportionality for dierent
shapes would be dierent, and we have no idea how to compute one it seems as though it would
depend on integrals of some sort over the area or around the perimeter of the pipe but wed have to
have a better model for the relationship between viscosity and force to be able to formulate them.
This, and this only I am going to just give you the answer on. The correct constant of propor-
153
Dened as anything requiring more than a page of algebra, serious partial derivatives, and concepts we havent
covered yet...
366 Week 8: Fluids
tionality for circular pipes turns out to be 8, so that the exact expression is:
P = I
_
8L
r
4
_
= IR (756)
where I have introduced the resistance of the pipe to ow:
R =
8L
r
4
(757)
Equation 756 is know as Poiseuilles Law and is a key relation for physicians and plumbers to
know because it describes both ow of water in pipes and the ow of blood in blood vessels wherever
the ow is slow enough that it is laminar and not turbulent (which is actually mostly, so that the
expression is useful ).
Before moving on, let me note that P = IR is the uid-ow version of a named formula
in electricity and magnetism (from next semester): Ohms Law. The hand-waving derivation
of Ohms Law there will be very similar, with all of the scaling worked out using intuition but a
nal constant of proportionality that includes the details of the resistive material turned at the last
minute into a parameter called the resistivity
154
.
8.4.4: A Brief Note on Turbulence
You will not be responsible for the formulas or numbers in this section, but you should be conceptu-
ally aware of the phenomenon of the onset of turbulence in uid ow. The velocity of the ow in a
circular pipe (and other parameters such as and r) can be transformed into a general dimensionless
parameter called the Reynolds Number Re
155
. The Reynolds number for a circular pipe is:
Re =
vD
=
v 2r
(758)
where D = 2r is the hydraulic diameter
156
, which in the case of a circular pipe is the actual
diameter. One can (as you can see) express Poiseuilles Law in terms of the Reynolds number,
although there is no particular benet to doing so.
The one thing the Reynolds number does for us is that it serves as a marker for the transition
to turbulent ow. For Re < 2300 ow in a circular pipe is laminar and all of the relations above
hold. Turbulent ow occurs for Re > 4000. In between is the region known as the onset of
turbulence, where the resistance of the pipe depends on ow in a very nonlinear fashion,
and among other things dramatically increases with the Reynolds number. As we will see in a
moment (in an example) this means that the partial occlusion of blood vessels can have a profound
eect on the human circulatory system.
At this point you should understand uid statics and dynamics quite well, armed both with
equations such as the Bernoulli Equation that describe idealized uid dynamics and statics as well
as with conceptual (but possibly quantitative) ideas such Pascals Principle or Archimedes principle
as the relationship between pressure dierences, ow, and the geometric factors that contribute to
resistance. Lets put some of this nascent understanding to the test by looking over and analyzing
the human circulatory system.
Week 8: Fluids 367
Figure 114: A simple cut-away diagram of the human heart.
8.5: The Human Circulatory System
For once, this is a chapter that math majors, physics majors, and engineers may, if they wish, skip,
although personally I think that any intellectually curious person would want to learn all sorts of
things that sooner or later will impact on their own health and life. To put that rather bluntly,
kids, sure now youre all young and healthy and everything, but in thirty or forty more years (if
you survive) you wont be, and understanding the things taught in this chapter will be extremely
useful to you then, if not now as you choose a lifestyle and diet that might get you through to then
in reasonably good cardiovascular shape!
Here is a list of True Facts about the human cardiovascular system, in no particular order, that
you should now be able to understand at least qualitatively and conceptually if not quantitatively.
The heart, illustrated in the schematic in gure 114 above
157
is the pump that drives blood
through your blood vessels.
The blood vessels are dierentiated into three distinct types:
Arteries, which lead strictly away from the heart and which contain a muscular layer
that elastically dilates and contracts the arteries in a synchronous way to help carry the
surging waves of blood. This acts as a shock absorber and hence reduces the peak
systolic blood pressure (see below). As people age, this muscular tissue becomes less
elastic hardening of the arteries as collagen repair mechanisms degrade or plaque
(see below) is deposited and systolic blood pressure often increases as a result.
154
The argument wont quite be identical the potential dierence V there will relate to current more like the
way F does to ow in our treatment, rather than P, so electrical resistance will be inversely proportional to A,
not A
2
.
155
Wikipedia: http://www.wikipedia.org/wiki/Reynolds Number.
156
Wikipedia: http://www.wikipedia.org/wiki/hydraulic diameter.
157
Wikipedia: http://www.wikipedia.org/wiki/Human heart. The diagram itself is borrowed from the wikipedia
creative commons, and of course you can learn a lot more of the anatomy and function of the heart and circulation
by reading the wikipedia articles on the heart and following links.
368 Week 8: Fluids
Arteries split up the farther one is from the heart, eventually becoming arterioles, the
very small arteries that actually split o into capillaries.
Capillaries, which are a dense network of very ne vessels (often only a single cell thick)
that deliver oxygenated blood throughout all living tissue so that the oxygen can
disassociate from the carrying hemoglobin molecules and diuse into the surrounding cells
in systemic circulation, or permit the oxygenation of blood in pulmonary circulation.
Veins, which lead strictly back to the heart from the capillaries. Veins also have a
muscle layer that expand or contract to aid in thermoregulation and regulation of blood
pressure as one lies down or stands up. Veins also provide capacitance to the circulatory
system and store the bodys spare blood; 60% of the bodys total blood supply is usually
in the veins at any one time. Most of the veins, especially long vertical veins, are equipped
with one-way venous valves every 4-9 cm that prevent backow and pooling in the lower
body during e.g. diastoli (see below).
Blood from the capillaries is collected rst in venules (the return-side equivalent of
arterioles) and then into veins proper.
There are two distinct circulatory systems in humans (and in the rest of the mammals and
birds):
Systemic circulation, where oxygenated blood enters the heart via pulmonary veins
from the lungs and is pumped at high pressure into systemic arteries that deliver it
through the capillaries and (deoxygenated) back via systemic veins to the heart.
Pulmonary circulation, where deoxgenated blood that has returned from the system
circulation is pumped into pulmonary arteries that deliver it to the lungs, where it is
oxygenated and returned to the heart by means of pulmonary veins. These two distinct
circulations do not mix and together, form a closed double circulation loop.
The heart is the pump that serves both systemic and pulmonary circulation. Blood
enters into the atria and is expelled into the two circulatory system from the ventricles.
Systemic circulation enters from the pulmonary veins into the left atrium, is pumped into
the left ventricle through the one-way mitral valve, which then pumps the blood at high
pressure into the systemic arteries via the aorta through the one-way aortic valve. It is
eventually returned by the systemic veins (the superior and inferior vena cava) to the
right atrium, pumped into the right ventricle through the one-way tricuspid valve, and
then pumped at high pressure into the pulmonary artery for delivery to the lungs.
The human heart (as well as the hearts of birds and mammals in general) is thus four-
chambered two atria and two ventricles. The total resistance of the systemic circulation
is generally larger than that of the pulmonary circulation and hence systemic arterial blood
pressure must be higher than pulmonary arterial blood pressure in order to maintain the same
ow. The left ventricle (primary systemic pump) is thus typically composed of thicker and
stronger muscle tissue than the right ventricle. Certain reptiles also have four-chambered
hearts, but their pulmonary and systemic circulations are not completely distinct and it is
thought that their hearts became four-chambered by a dierent evolutionary pathway.
Blood pressure is generally measured and reported in terms of two numbers:
Systolic blood pressure. This is the peak/maximum arterial pressure in the wave
pulse generated that drives systemic circulation. It is measured in the (brachial artery
of the) arm, where it is supposed to be a reasonably accurate reection of peak aortic
pressure just outside of the heart, where, sadly, it cannot easily be directly measured
without resorting to invasive methods that are, in fact, used e.g. during surgery.
Diastolic blood pressure. This is the trough/minimum arterial pressure in the
wave pulse of systemic circulation.
Week 8: Fluids 369
Blood pressure has historically been measured in millimeters of mercury, in part because
until fairly recently a sphygnomometer built using an integrated mercury barometer was by
far the most accurate way to measure blood pressure, and it still extremely widely used in
situations where high precision is required. Recall that 760 mmHg (torr) is 1 atm or 101325
Pa.
Normal Systolic systemic blood pressure can fairly accurately be estimated on the basis of the
distance between the heart and the feet; a distance on the order of 1.5 meters leads to a pressure
dierence of around 0.15 atm or 120 mmHg.
Blood is driven through the relatively high resistance of the capillaries by the dierence in
arterial pressure and venous pressure. The venous system is entirely a low pressure return; its
peak pressure is typically order of 0.008 bar (6 mmHg). This can be understood and predicted by
the mean distance between valves in the venous system the pressure dierence between one valve
and another (say) 8 cm higher is approximately
b
g 0.08 = 0.008 bar. However, this pressure is
not really static it varies with the delayed pressure wave that causes blood to surge its way up,
down, or sideways through the veins on its way back to the atria of the heart.
This dierence in pressure means one very important thing. If you puncture or sever a vein,
blood runs out relatively slowly and is fairly easily staunched, as it is driven by a pressure only a
small bit higher than atmospheric pressure. Think of being able to easily plug a small leak in a glass
of water (where the uid height is likely very close to 8-10 cm) by putting your nger over the hole.
When blood is drawn, a vein in e.g. your arm is typically tapped, and afterwards the hole almost
immediately seals well enough with a simple clot sucient to hold in the venous pressure.
If you puncture an artery, on the other hand, especially a large artery that still has close to the
full systolic/diastolic pressure within it, blood spurts out of it driven by considerable pressure, the
pressure one might see at the bottom of a barrel or a back yard swimming pool. Not so easy to stop
it with light pressure from a nger, or seal up with a clot! It is proportionately more dicult to
stop arterial bleeding and one can lose considerable blood volume in a very short time, leading to
a fatal hypotension. Of course if one severs a large artery or vein (so that clotting has no chance
to work) this is a very bad thing, but in general always worse for arteries than for veins, all other
things being equal.
An exception of sorts is found in the jugular vein (returning from the brain). It has no valves
because it is, after all, downhill from the brain back to the heart! As a consequence of this a
human who is inverted (suspended by their feet, standing on their head) experiences a variety of
circulatory problems in their head. Blood pools in the head, neck and brain until blood pressure
there (increased by distension of the blood vessels) is enough to lift the blood back up to the heart
without the help of valves, increasing venous return pressure in the brain itself by a factor of 2 to
4. This higher pressure is transmitted back throughout the brains vasculature, and, if sustained,
can easily cause aneurisms or ruptures of blood vessels (see below)) and death from blood clots or
stroke. It can also cause permanent blindness as circulation through the eyes is impaired
158
Note, however, that blood is pushed through the systemic and pulmonary circulation in waves
158
You are old, Father William, the young man said,
And your hair has become very white;
And yet you incessantly stand on your
Do you think, at your age, it is right?
In my youth, Father William replied to his son,
I feared it might injure the brain;
But now that Im perfectly sure I have
none, Why, I do it again and again.
Not really that good an idea...
370 Week 8: Fluids
of peak pressure that actually propagate faster than the ow and that the elastic aorta acts like a
balloon that is constantly relled during the left ventricular constraction and buers the arterial
pressure in fact, it behaves a great deal like a capacitor in an RC circuit behaves if it is
being driven by a series of voltage pulses! Even this model isnt quite adequate. The systolic
pulse propagates down through the (elastic) arteries (which dilate and contract to accomodate and
maintain it) at a speed faster than the actual uid velocity of the blood in the arteries. This
eectively rapidly transports a new ejection volume of blood out to the arterioles to replace the
blood that made it through the capillaries in the previous heartbeat and maintain a positive pressure
dierence across the capillary system even during diastole so that blood continues to move forward
around the circulation loop.
Unfortunately we wont learn the math to be able to better understand this (and be able to at
least qualitatively plot the expected time variation of ow) until next semester, so in the meantime
we have to be satised with this heuristic explanation based on a dynamical equilibrium picture
of ow plus a bit of intuition as to how an elastic balloon can store pressure pulses and smooth
out their delivery.
There is a systolic peak in the blood pressure delivered to the pulmonary system as well, but it is
much lower than the systolic systemic pressure, because (after all) the lungs are at pretty much the
same height as the heart. The pressure dierence needs only to be high enough to maintain the same
average ow as that in the systemic circulation through the much lower resistance of the capillary
network in the lungs. Typical healthy normal resting pulmonary systole pressures are around 15
mmHg; pressures higher than 25 mmHg are likely to be associated with pulmonary edema, the
pooling of uid in the interstitial spaces of the lungs. This is a bad thing.
The return pressure in the pulmonary veins (to the right atrium, recall) is 2-15 mmHg, roughly
consistent with central (systemic) venous pressure at the left atrium but with a larger variation.
The actual rhythm of the heartbeat is as follows. Bearing in mind that it is a continuous cycle,
rst blood from the last beat, which has accumulated in the left and right atrium during the
hearts resting phase between beats, is expelled through the mitral and tricuspid valves from the left
and right atrium respectively. The explusion is accomplished by the contraction of the atrial wall
muscles, and the backow of blood into the venous system is (mostly) prevented by the valves of the
veins although there can be some small regurgitation. This expulsion which is nearly simultaneous
with mitral barely leading tricuspid pre-compresses the blood in the ventricles and is the rst lub
one hears in the lub-dub of the heartbeat observed with a stethoscope.
Immediately following this a (nearly) simultanous contraction of the ventricular wall muscles
causes the expulsion of the blood from the left and right ventricles through the semilunar valves
into the aorta and pulmonary arteries, respectively. As noted above, the left-ventricular wall is
thicker and stronger and produces a substantially higher peak systolic pressure in the aorta and
systemic circulation than the right ventricle produces in the pulmonary arteries. The elastic aorta
distends (reducing the peak systemic pressure as it stores the energy produced by the heartbeak)
and partially sustains the higher pressure across the capillaries throughout the resting phase. This
is the dub in the lub-dub of the heartbeat.
This isnt anywhere near all of the important physics in the circulatory system, but it should
be enough for you to be able to understand the basic plumbing well enough to learn more later
159
.
Lets do a few very important examples of how things go wrong in the circulatory system and how
uid physics helps you understand and detect them!
159
...And understand why we spent time learning to solve rst order dierential equations this semester so that we
can understand RC circuits in detail next semester so we can think back and further understand the remarks about
how the aorta acts like a capacitor this semester.
Week 8: Fluids 371
Example 8.5.1: Atherosclerotic Plaque Partially Occludes a Blood Vessel
Humans are not yet evolved to live 70 or more years. Mean live expectancy as little as a hundred
years ago was in the mid-50s, if you only average the people that survived to age 15 otherwise it
was in the 30s! The average age when a woman bore her rst child throughout most of the period
we have been considered human has been perhaps 14 or 15, and a woman in her thirties was often
a grandmother. Because evolution works best if parents dont hang around too long to compete with
their own ospring, we are very likely evolved to die somewhere around the age of 50 or 60, three
to four generations (old style) after our own birth. Humans begin to really experience the eects of
aging failing vision, incipient cardiovascular disease, metabolic slowing, greying hair, wearing out
teeth, cancer, diminished collagen production, arthritis, around age 45 (give or take a few years),
and it once it starts it just gets worse. Old age physically sucks, I can say authoritatively as I type
this peering through reading glasses with my mildly arthritic ngers over my gradually expanding
belly at age 56.
One of the many ways it sucks is that the 40s and 50s is where people usually show the
rst signs of cardiovascular disease, in particular atherosclerosis
160
granular deposits of fatty
material called plaques that attach to the walls of e.g. arteries and gradually thicken over time,
generally associated with high blood cholesterol and lipidemia. The risk factors for atherosclerosis
form a list as long as your arm and its fundamental causes are not well understood, although they
are currently believed to form as an inammatory response to surplus low density lipoproteins (one
kind of cholesterol) in the blood.
r
2
r
r
1
1
L
P
+
P
P
+ P
a)
b)
plaque
Figure 115: Two identical blood vessels with circular cross-sections, one that is clean (of radius
r
1
) and one that is perhaps 90% occluded by plaque that leaves an aperture of radius r
2
< r
1
in a
region of some length L.
Our purpose, however, is not to think about causes and cures but instead what uid physics has
to say about the disorder, its diagnosis and eects. In gure 115 two arteries are illustrated. Artery
a) is clean, has a radius of r
1
, and (from the Poiseuille Equation above) has a very low resistance
to any given ow of blood. Because R
a
over the length L is low, there is very little pressure drop
between P
+
and P
on the two sides of any given stretch of length L. The velocity prole of the
uid is also more or less uniform in the artery, slowing a bit near the walls but generally moving
smoothly throughout the entire cross-section.
Artery b) has a signicant deposit of atherosclerotic plaques that have coated the walls and
reduced the eective radius of the vessel to r
2
over an extended length L. The vessel is perhaps
160
Wikipedia: http://www.wikipedia.org/wiki/Atherosclerosis. As always, there is far, far more to say about this
subject than I can cover here, all of it interesting and capable of helping you to select a lifestyle that prolongs a high
quality of life.
372 Week 8: Fluids
90% occluded only 10% of its normal cross-sectional area is available to carry uid.
We can now easily understand several things about this situation. First, if the total ow in
artery b) is still being maintained at close to the levels of the ow in artery a) (so that tissue being
oxygenated by blood delivered by this artery is not being critically starved for oxygen yet) the
uid velocity in the narrowed region is ten times higher than normal! Since the Reynolds
number for blood owing in primary arteries is normally around 1000 to 2000, increasing v by a
factor of 10 increases the Reynolds number by a factor of 10, causing the ow to become turbulent
in the obstruction. This tendency is even more pronounced than this gure suggests Ive drawn
a nice symmetric occlusion, but the atheroma (lesion) is more likely to grow predominantly on one
side and irregular lesions are more likely to disturb laminar ow even for smaller Reynolds numbers.
This turbulence provides the basis for one method of possible detection and diagnosis you can
hear the turbulence (with luck) through the stethoscope during a physical exam. Physicians get
a lot of practice listening for turbulence since turbulence produced by articially restricting blood
ow in the brachial artery by means of a constricting cu is basically what one listens for when
taking a patients blood pressure. It really shouldnt be there, especially during diastole, the rest of
the time.
Next, consider what the vessels resistance across the lesion of length L should do. Recall that
R 1/A
2
. That means that the resistance is at least 100 times larger than the resistance of
the healthy artery over the same distance. In truth, it is almost certainly much greater than this,
because as noted, one has converted to turbulent ow and our expression for the resistance assumed
laminar ow.
A hundredfold to thousandfold increase in the resistance of the segment means that either the
uid ow itself will be reduced, assuming a constant upstream pressure, or the pressure upstream
will increase to maintain adequate ow and perfusion. In practice a certain amount of both can
occur the stiening of the artery due to the lesion and an increased resting heart rate
161
can raise
systolic blood pressure, which tends to maintain ow, but as narrowing proceeds it cannot raise it
enough to compensate.
At some point, the tissue downstream from the occluded artery begins to suer from lack of
oxygen, especially during times of metabolic stress. If the tissue in question is in a leg or an arm,
weakness and pain may result, not good, but arguably recoverable. If the tissue in questions is the
heart itself or the lungs or the brain this is very bad indeed. The failure to deliver sucient
oxygen to the heart over the time required to cause actual death of heart muscle tissue is what is
commonly known as a heart attack. The same failure in an artery that supplies the brain is called a
stroke. The heart and brain have very limited ability to regrow damaged tissue after either of these
events. Occlusion and hardening of the pulmonary arteries can lead to pulmonary hypertension,
which in turn (as already noted) can lead to pulmonary edema and a variety of associated problems.
Example 8.5.2: Aneurisms
An aneurism is basically the opposite of an atherosclerotic lesion. A portion of the walls of an artery
or, less commonly, a vein thins and begins to dilate or stretch in response to the pulsing of the
systolic wave. Once the artery has permanently stretched along some short length to a larger
radius than the normal artery on either side, a nasty feedback mechanism ensues. Since the cross-
sectional area of the dilated area is larger, uid ow there slows from conservation of ow. At the
same time, the pressure in the dilated region must increase according to Bernoullis equation the
pressure increase is responsible for slowing the uid as it enters the aneurism and re-accelerating it
back to the normal ow rate on the far side.
The higher pressure, of course, then makes the already weakened arterial wall stretch more, which
161
Among many other things. High blood pressure is extremely multifactorial.
Week 8: Fluids 373
dilates the aneurism more, which slows the blood more which increases the pressure, until some sort
of limit is reached: extra pressure from surrounding tissue serves to reinforce the artery and keeps
it from continuing to grow or the aneurism ruptures, spilling blood into surrounding (low pressure)
tissue with every heartbeat. While there arent a lot of places a ruptured aneurism is good, in the
brain it is very bad magic, causing the same sort of damage as a stroke as the increased pressure in
the tissue surrounding the rupture becomes so high that normal capillary ow through the tissue is
compromised.
Example 8.5.3: The Girae
The Girae isnt really an example problem, it is more like a nifty/cool True Fact but I havent
bothered to make up a nifty cool true fact header for the book (at least not yet). Full grown adult
giraes are animals (you may recall, or not
162
) that stand roughly 5 meters high.
Because of their height, giraes have a uniquely evolved circulatory system
163
. In order to drive
blood from its feet up to its brain, especially in times of stress when it is e.g. running, its heart
has to be able to maintain a pressure dierence of close to half an atmosphere of pressure (using the
rule that 10 meters of water column equals one atmosphere of pressure dierence and assuming that
blood and water have roughly the same density). A girae heart is correspondingly huge: roughly
60 cm long and has a mass of around 10 kg in order to accomplish this.
When a girae is erect, its cerebral blood pressure is normal (for a girae), but when it bends
to drink, its head goes down to the ground. This rapidly increases the blood pressure being delivered
by its heart to the brain by 50 kPa or so. It has evolved a complicated set of pressure controls in
its neck to reduce this pressure so that it doesnt have a brain aneurism every time it gets thirsty!
Giraes, like humans and most other large animals, have a second problem. The heart doesnt
maintain a steady pressure dierential in and of itself; it expels blood in beats. In between contrac-
tions that momentarily increase the pressure in the arterial (delivery) system to a systolic peak
that drives blood over into the venous (return) system through capillaries that either oxygenate the
blood in the pulmonary system or give up the oxygen to living tissue in the rest of the body, the
arterial pressure decreases to a diastolic minimum.
Even in relatively short (compared to a girae!) adult humans, the blood pressure dierential
between our nose and our toes is around 0.16 bar, which not-too-coincidentally (as noted above) is
equivalent to the 120 torr (mmHg) that constitutes a fairly normal systolic blood pressure. The
normal diastolic pressure of 70 torr (0.09 bar) is insucient to keep blood in the venous system from
falling back out of the brain and pooling in and distending the large veins of the lower limbs.
To help prevent that, long (especially vertical) veins have one-way valves that are spaced
roughly every 4 to 8 cm along the vein. During systoli, the valves open and blood pulses forward.
During diastoli, however, the valves close and distribute the weight of the blood in the return system
to 6 cm segments of the veins while preventing backow. The pressure dierential across a valve
and supported by the smooth muscle that gives tone to the vein walls is then just the pressure
accumulated across 6 cm (around 5 torr).
Humans get varicose veins
164
when these valves fail (because of gradual loss of tone in the
veins with age, which causes the vein to swell to where the valve aps dont properly meet, or other
factors). When a valve fails, the next-lower valve has to support twice the pressure dierence (say
10 torr) which in turn swells that vein close to the valve (which can cause it to fail as well) passing
three times this dierential pressure down to the next valve and so on. Note well that there are
162
Wikipedia: http://www.wikipedia.org/wiki/Girae. And Wikipedia stands ready to educate you further, if you
have never seen an actual Girae in a zoo and want to know a bit about them
163
Wikipedia: http://www.wikipedia.org/wiki/Girae#Circulatory system.
164
Wikipedia: http://www.wikipedia.org/wiki/Varicose Veins.
374 Week 8: Fluids
two aspects of this extra pressure to consider one is the increase in pressure dierential across the
valve, but perhaps the greater one is the increase in pressure dierential between the inside of the
vein and the outside tissue. The latter causes the vein to dilate (swell, increase its radius) as the
tissue stretches until its tension can supply the pressure needed to conne the blood column.
Opposing this positively fed-back tendency to dilate, which compromises valves, which in turn
increases the dilation to eventual destruction are things like muscle use (contracting surrounding
muscles exerts extra pressure on the outside of veins and hence decreases the pressure dierential
and stress on the venous tissue), general muscle and skin tone (the skin and surrounding tissue helps
maintain a pressure outside of the veins that is already higher than ambient air pressure, and keeping
ones blood pressure under control, as the diastolic pressure sets the scale for the venous pressure
during diastoli and if it is high then the minimum pressure dierential across the vein walls will be
correspondingly high. Elevating ones feet can also help, exercise helps, wearing support stockings
that act like a second skin and increase the pressure outside of the veins can help.
Carrying the extra pressure below compromised valves nearly all of the time, the veins gradually
dilate until they are many times their normal diameter, and signicant amounts of blood pool in
them these ropy, twisted, fat, deformed veins that not infrequently visibly pop up out of the
skin in which they are embedded are the varicose veins.
Naturally, giraes have this problem in spades. The pressure in their lower extremities, even
allowing for their system of valves, is great enough to rupture their capillaries. To keep this from
happening, the skin on the legs of a girae is among the thickest and strongest found in nature it
functions like an astronauts g-suit or a permanent pair of support stockings, maintaining a high
baseline pressure in the tissue of the legs outside of the veins and capillaries, and thereby reducing
the pressure dierential.
Another cool fact about giraes as noted above, they pretty much live with high blood
pressure their normal pressure of 280/180 torr (mmHg) is 2-3 times that of humans (because
their height is 2-3 times that of humans) in order to keep their brain perfused with blood. This
pressure has to further elevate when they e.g. run away from predators or are stressed. Older adult
giraes have a tendency to die of a heart attack if they run for too long a time, so zoos have to
take care to avoid stressing them if they wish to capture them!
Finally, giraes splay their legs when they drink so that they reduced the pressure dierential
the peristalsis of their gullet has to maintain to pump water up and over the hump down into their
stomach. Even this doesnt completely exhaust the interesting list of girae facts associated with
their uid systems. Future physicians would be well advised to take a closer peek at these very
large mammals (as well as at elephants, who have many of the same problems but very dierent
evolutionary adaptations to accommodate them) in order to gain insight into the complex uid
dynamics to be found in the human body.
Homework for Week 8
Problem 1.
Week 8: Fluids 375
Problem 2.
A small boy is riding in a minivan with the windows closed, holding a helium balloon. The van
goes around a corner to the left. Does the balloon swing to the left, still pull straight up, or swing
to the right as the van swings around the corner?
Problem 3.
?
?
?
A person stands in a boat oating on a pond and containing several large, round, rocks. He
throws the rocks out of the boat so that they sink to the bottom of the pond. The water level of
the pond will:
a) Rise a bit.
b) Fall a bit.
c) Remain unchanged.
d) Cant tell from the information given (it depends on, for example, the shape of the boat, the
mass of the person, whether the pond is located on the Earth or on Mars...).
Problem 4.
People with vascular disease or varicose veins (a disorder where the veins in ones lower extremeties
become swollen and distended with uid) are often told to walk in water 1-1.5 meters deep. Explain
why.
Problem 5.
In the gure above three dierent pipes are shown, with cross-sectional areas and ow speeds as
shown. Rank the three diagrams a, b, and c in the order of the speed of the outgoing ow.
Problem 6.
376 Week 8: Fluids
a) A = 30 cm
1
2
, v
1
= 3 cm/sec, A
2
= 6 cm
2
1
2
, v
1 2
2
= 10 cm = 8 cm/sec, A = 5 cm b) A
, v
1
2
c) A
1
= 20 cm
2
= 3 cm/sec, A
2
= 3 cm
H
In the gure above three asks are drawn that have the same (shaded) cross sectional area of
the bottom. The depth of the water in all three asks is H, and so the pressure at the bottom in
all three cases is the same. Explain how the force exerted by the uid on the circular bottom can
be the same for all three asks when all three asks contain dierent weights of water.
Problem 7.
y
R
y
L
Pascals Principle
Static Equilibrium
A vertical U-tube open to the air at the top is lled with oil (density
o
) on one side and water
(density
w
) on the other, where
o
<
w
. Find y
L
, the height of the column on the left, in terms
Week 8: Fluids 377
of the densities, g, and y
R
as needed. Clearly label the oil and the water in the diagram below and
show all reasoning including the basic principle(s) upon which your answer is based.
Problem 8.
H
Pump?
Outflow
pool
h = 8 m
Static Pressure
Barometers
A pump is a machine that can maintain a pressure dierential between its two sides. A particular
pump that can maintain a pressure dierential of as much as 10 atmospheres of pressure between
the low pressure side and the high pressure side is being used on a construction site.
a) Your construction boss has just called you into her oce to either explain why they arent
getting any water out of the pump on top of the H = 25 meter high cli shown above. Examine
the schematic above and show (algebraically) why it cannot possibly deliver water that high. Your
explanation should include an invocation of the appropriate physical law(s) and an explicit calcula-
tion of the highest distance the a pump could lift water in this arrangement. Why is the notion that
the pump sucks water up misleading? What really moves the water up?
b) If you answered a), you get to keep your job. If you answer b), you might even get a raise (or
at least, get full credit on this problem)! Tell your boss where this single pump should be located
to move water up to the top and show (draw a picture of) how it should be hooked up.
Problem 9.
Archimedes Principle
Weight
378 Week 8: Fluids
W?
T?
A block of density and volume V is suspended by a thin thread and is immersed completely
in a jar of oil (density
o
< ) that is resting on a scale as shown. The total mass of the oil and jar
(alone) is M.
a) What is the buoyant force exerted by the oil on the block?
b) What is the tension T in the thread?
c) What does the scale read?
Problem 10.
0.5 m
r = 5 cm
10 m
Pressure in a Static Fluid
Week 8: Fluids 379
That it is dangerous to build a drain for a pool or tub consisting of a single narrow pipe that
drops down a long ways before encountering air at atmospheric pressure was demonstrated tragically
in an accident that occurred (no fooling!) within two miles from where you are sitting (a baby pool
was built with just such a drain, and was being drained one day when a little girl sat down on the
drain and was severely injured).
In this problem you will analyze why.
Suppose the mouth of a drain is a circle ve centimeters in radius, and the pool has been draining
long enough that its drain pipe is lled with water (and no bubbles) to a depth of ten meters below
the top of the drain, where it exits in a sewer line open to atmospheric pressure. The pool is 50 cm
deep. If a thin steel plate is dropped to suddenly cover the drain with a watertight seal, what is the
force one would have to exert to remove it straight up?
Note carefully this force relative to the likely strength of mere esh and bone (or even thin steel
plates!) Ignorance of physics can be actively dangerous.
Problem 11.
P
H
h
R
P
0
BEER
A
a
Bernoullis Equation
Toricellis Law
In the gure above, a CO
2
cartridge is used to maintain a pressure P on top of the beer in a
beer keg, which is full up to a height H above the tap at the bottom (which is obviously open to
normal air pressure) a height h above the ground. The keg has a cross-sectional area A at the top.
Somebody has pulled the tube and valve o of the tap (which has a cross sectional area of a) at the
bottom.
a) Find the speed with which the beer emerges from the tap. You may use the approximation
A a, but please do so only at the end. Assume laminar ow and no resistance.
b) Find the value of R at which you should place a pitcher (initially) to catch the beer.
380 Week 8: Fluids
c) Evaluate the answers to a) and b) for A = 0.25 m
2
, P = 2 atmospheres, a = 0.25 cm
2
, H = 50
cm, h = 1 meter and
beer
= 1000 kg/m
3
(the same as water).
Problem 12.
m
M
The gure above illustrates the principle of hydraulic lift. A pair of coupled cylinders are lled
with an incompressible, very light uid (assume that the mass of the uid is zero compared to
everything else).
a) If the mass M on the left is 1000 kilograms, the cross-sectional area of the left piston is 100
cm
2
, and the cross sectional area of the right piston is 1 cm
2
, what mass m should one place
on the right for the two objects to be in balance?
b) Suppose one pushes the right piston down a distance of one meter. How much does the mass
M rise?
Problem 13.
H
P
a
P = 0
The idea of a barometer is a simple one. A tube lled with a suitable liquid is inverted into a
reservoir. The tube empties (maintaining a seal so air bubbles cannot get into the tube) until the
Week 8: Fluids 381
static pressure in the liquid is in balance with the vacuum that forms at the top of the tube and the
ambient pressure of the surrounding air on the uid surface of the reservoir at the bottom.
a) Suppose the uid is water, with
w
= 1000 kg/m
3
. Approximately how high will the water
column be? Note that water is not an ideal uid to make a barometer with because of the height
of the column necessary and because of its annoying tendency to boil at room temperature
into a vacuum.
b) Suppose the uid is mercury, with a specic gravity of 13.6. How high will the mercury column
be? Mercury, as you can see, is nearly ideal for uids-pr-compare-barometers except for the
minor problem with its extreme toxicity and high vapor pressure.
Fortunately, there are many other ways of making good uids-pr-compare-barometers.
382 Week 9: Oscillations
Optional Problems: Start Review for Final!
At this point we are roughly four weeks out from our nal exam
165
. I thus strongly suggest
that you devote any extra time you have not to further reinforcement of uid ow, but to a gradual
slow review of all of the basic physics from the rst half of the course. Make sure that you still
remember and understand all of the basic principles of Newtons Laws, work and energy, momentum,
rotation, torque and angular momentum. Look over your old homework and quiz and hour exam
problems, review problems out of your notes, and look for help with any ideas that still arent clear
and easy.
165
...which might be only one and a half weeks out in a summer session!
Week 9: Oscillations
Oscillation Summary
Springs obey Hookes Law:

F = kx (where k is called the spring constant. A perfect spring
(with no damping or drag force) produces perfect harmonic oscillation, so this will be our
archetype.
A pendulum (as we shall see) has a restoring force or torque proportional to displacement for
small displacements but is much too complicated to treat in this course for large displacements.
It is a simple example of a problem that oscillates harmonically for small displacements but
not harmonically for large ones.
An oscillator can be damped by dissipative forces such as friction and viscous drag. A damped
oscillator can have exhibit a variety of behaviors depending on the relative strength and form
of the damping force, but for one special form it can be easily described.
An oscillator can be driven by e.g. an external harmonic driving force that may or may not
be at the same frequency (in resonance with the natural frequency of the oscillator.
The equation of motion for any (undamped) harmonic oscillator is the same, although it may
have dierent dynamical variables. For example, for a spring it is:
d
2
x
dt
2
+
k
m
x =
d
2
x
dt
2
+
2
x = 0 (759)
where for a simple pendulum (for small oscillations) it is:
d
2
dt
2
+
g
x =
d
2
dt
2
+
2
= 0 (760)
(In this latter case is the angular frequency of the oscillator, not the angular velocity of
the mass d/dt.)
The general solution to the equation of motion is:
x(t) = X
0
cos(t +) (761)
where =
_
k/m and X
0
and are the constants of integration (set from e.g. the initial
conditions). Note that we alter the variable to t the specic problem for a pendulum it
would be:
(t) =
0
cos(t +) (762)
with =
_
g/.
The potential energy of an oscillator is found by integrating:
U(x) =
_
x
0
kx
dx
=
1
2
kx
2
(763)
383
if we use the (usual but not necessary) convention that U(0) = 0 when the mass is at the
equilibrium displacement, x = 0.
The kinetic energy of an oscillator is found from:
v(t) =
dx
dt
= X
0
sin(t +) (764)
and
K(t) =
1
2
mv
2
=
1
2
mX
2
0
2
sin
2
(t +) =
1
2
kX
2
0
sin
2
(t +) (765)
The total mechanical energy is therefore obviously a constant:
E(t) =
1
2
mv
2
+
1
2
kx
2
=
1
2
kX
2
0
sin
2
(t +) +
1
2
kX
2
0
cos
2
(t +) =
1
2
kX
2
0
(766)
As usual, the relation between the angular frequency, the regular frequency, and the period of
the oscillator is given by:
=
2
T
= 2f (767)
(where f = 1/T). SI units of frequency are Hertz cycles per second. Angular frequency
has units of radians per second. Since both cycles and radians are dimensionless, the units
themselves are dimensionally inverse seconds but they are (obviously) related by 2 radians
per cycle.
A (non-ideal) harmonic oscillator in nature is almost always damped by friction and drag
forces. If we assume damping by viscous drag in (low Reynolds number) laminar ow not
unreasonable for smooth objects moving in a damping uid, if somewhat itself idealized the
equation of motion becomes:
d
2
x
dt
2
+ +
b
m
dx
dt
+
k
m
x = 0 (768)
The solution to this equation of motion is:
x
(t) = X
0
e
b
2m
t
cos(
t +) (769)
where
=
0
_
1
b
2
4km
(770)
9.1: The Simple Harmonic Oscillator
Oscillations occur whenever a force exists that pushes an object back towards a stable equilibrium
position whenever it is displaced from it. Such forces abound in nature things are held together
in structured form because they are in stable equilibrium positions and when they are disturbed in
certain ways, they oscillate.
When the displacement from equilibrium is small, the restoring force is often linearly related to
the displacement, at least to a good approximation. In that case the oscillations take on a special
character they are called harmonic oscillations as they are described by harmonic functions (sines
and cosines) known from trigonometery.
In this course we will study simple harmonic oscillators, both with and without damping
(and harmonic driving) forces. The principle examples we will study will be masses on springs and
various penduli.
m
k
x
equilibrium
F
x
= kx
Figure 116: A mass on a spring is displaced by a distance x from its equilibrium position. The
spring exerts a force F
x
= kx on the mass (Hookes Law).
9.1.1: The Archetypical Simple Harmonic Oscillator: A Mass on a Spring
Consider a mass m attached to a perfect spring (which in turn is axed to a wall as shown in gure
116. The mass rests on a surface so that gravitational forces are cancelled by the normal force and
are hence irrelevant. The mass will be displaced only in one direction (call it x) and otherwise
constrained so that motion in or out of the plane is impossible and no drag or frictionless forces are
(yet) considered to be relevant.
We know that the force exerted by a perfect spring on a mass stretched a distance x from its
equilibrium position is given by Hookes Law:
F
x
= kx (771)
where k is the spring constant of the spring. This is a linear restoring force, and (as we shall
see) is highly characteristic of the restoring forces exerted by any system around a point of stable
equilibrium.
Although thus far we have avoided trying to determine the most general motion of the mass, it
is time for us to tackle that chore. As we shall see, the motion of an undamped simple harmonic
oscillator is very easy to understand in the ideal case, and easy enough to understand qualitatively
or semi-quantitatively that it serves as an excellent springboard to understanding many of the
properties of bulk materials, such as compressibility, stress, and strain.
We begin, as one might expect, with Newtons Second Law, used to obtain the (second order,
linear, homogeneous, dierential) equation of motion for the system. Note well that although this
sounds all complicated and everything like real math weve been solving second order dier-
ential equations from day one, so they shouldnt be intimidating. Solving the equation of motion
for the simple harmonic oscillator isnt quite as simple as just integrating twice, but as we will see
neither is it all that dicult.
Hookes Law combined with Newtons Second Law can thus be written and massaged alge-
braically as follows:
ma
x
= m
d
2
x
dt
2
= F
x
= kx
m
d
2
x
dt
2
+kx = 0
d
2
x
dt
2
+
k
m
x = 0
d
2
x
dt
2
+
2
x = 0 (772)
where we have dened the angular frequency of the oscillator,
2
= k/m (773)
This must have units of inverse time squared (why?). We will momentarily justify this identi-
cation, but it wont hurt to start learning it now.
Equation 772 (with the
2
) is the standard harmonic oscillator dierential equation of
motion (SHO ODE). As well soon see with quite a few examples and an algebraic argument, we
can put the equation of motion for many systems into this form for at least small displacements
from a stable equilibrium point. If we can properly solve it once and for all now, whenever we
can put an equation of motion into this form in the future we can just read o the solution by
identifying similar quantities in the equation.
To solve it
166
, we note that it basically tells us that x(t) must be a function that has a second
derivative proportional to the function itself.
We know at least three functions whose second derivatives are proportional to the functions
themselves: cosine, sine and exponential. In this particular case, we could guess cosine or sine and
we would get a perfectly reasonable solution. The bad thing about doing this is that the solution
methodology would not generalize at all it wouldnt work for rst order, third order, or even
general second order ODEs. It would give us a solution to the SHO problem (for example) but not
allow us to solve the damped SHO problem or damped, driven SHO problems we investigate later
this week. For this reason, although it is a bit more work now, well search for a solution assuming
that it has an exponential form.
Note Well!
If you are completely panicked by the following solution, if thinking about trying to understand
it makes you feel sick to your stomach, you can probably skip ahead to the next section (or rather,
begin reading again at the end of this chapter after the real solultion is obtained).
There is a price you will pay if you do. You will never understand where the solution comes
from or how to solve the slightly more dicult damped SHO problem, and will therefore have to
memorize the solutions, unable to rederive them if you forget (say) the formula for the damped
oscillator frequency or the criterion for critical damping.
As has been our general rule above, I think that it is better to try to make it through the derivation
to where you understand it, even if only a single time and for a moment of understanding, even if
you do then move on and just learn and work to retain the result. I think it helps you remember
the result with less eort and for longer once the course is over, and to bring it back into mind and
understand it more easily if you should ever need to in the future. But I also realize that mastering
a chunk of math like this doesnt come easily to some of you and that investing the time to do given
a limited amount of time to invest might actually reduce your eventual understanding of the general
content of this chapter. Youll have to decide for yourself if this is true, ideally after at least giving
the math below a look and a try. Its not really as dicult as it looks at rst.
The exponential assumptions makes solutions to general linear homogeneous ODEs simple. Note
166
Not only it, but any homogeneous linear Nth order ordinary dierential equation the method can be applied
to rst, third, fourth, fth... order linear ODEs as well.
well that:
x(t) = X
0
e
t
dx
dt
= X
0
e
t
d
2
x
dt
2
=
2
X
0
e
t
d
3
x
dt
3
=
3
X
0
e
t
... (774)
where is an unknown parameter and X
0
is an arbitrary (possibly complex) constant. Indeed, this
is a general rule:
d
n
x
dt
n
=
n
X
0
e
t
(775)
for any n = 0, 1, 2....
Substituting this assumed solution and its rule for the second derivative into the SHO ODE, we
get:
d
2
x
dt
2
+
2
x = 0
d
2
X
0
e
t
dt
2
+
2
X
0
e
t
= 0
2
X
0
e
t
+
2
X
0
e
t
= 0
_
2
+
2
_
X
0
e
t
= 0 (776)
There are two ways this equation could be true. First, we could have X
0
= 0, in which case x(t) = 0
for any value of . This indeed does solve the ODE, but the solution is boring nothing moves!
Mathematicians call this the trivial solution to a homogeneous linear ODE, and we will reject it
out of hand by insisting that we have a nontrivial solution with X
0
= 0.
In that case it is necessary for
_
2
+
2
_
= 0 (777)
This is called the characteristic equation for the linear homogeneous ordinary dierential equa-
tion. If we can nd an such that this equation is satised, then our assumed answer will indeed
solve the ODE for nontrivial (nonzero) X
0
.
Clearly:
= i (778)
where
i = +
1 (779)
We now have a solution to our second order ODE indeed, we have two solutions but those
solutions are complex exponentials
167
and contain the imaginary unit
168
, i.
In principle, if you have satised the prerequisites for this course you have almost certainly
studied imaginary numbers and complex numbers
169
in a high school algebra class and perhaps
again in college level calculus. Unfortunately, because high school math is often indierently well
taught, you may have thought they would never be good for anything and hence didnt pay much
attention to them, or (however well they were or were not covered) at this point youve now forgotten
them.
167
Wikipedia: http://www.wikipedia.org/wiki/Euler Formula.
168
Wikipedia: http://www.wikipedia.org/wiki/Imaginary unit.
169
Wikipedia: http://www.wikipedia.org/wiki/Complex numbers.
In any of these cases, now might be a really good time to click on over to my online
Mathematics for Introductory Physics book
170
and review at least some of the properties of i
and complex numbers and how they relate to trig functions. This book is still (as of this moment)
less detailed here than I would like, but it does review all of their most important properties that
are used below. Dont hesitate to follow the wikipedia links as well.
If you are a life science student (perhaps a bio major or premed) then perhaps (as noted above)
you wont ever need to know even this much and can get away with just memorizing the real solutions
below. If you are a physics or math major or an engineering student, the mathematics of this solution
is just a starting point to an entire, amazing world of complex numbers, quaternions, Cliord
(geometric division) algebras, that are not only useful, but seem to be essential in the development of
electromagnetic and other eld theories, theories of oscillations and waves, and above all in quantum
theory (bearing in mind that everything we are learning this year is technically incorrect, because
the Universe turns out not to be microscopically classical). Complex numbers also form the basis for
one of the most powerful methods of doing certain classes of otherwise enormously dicult integrals
in mathematics. So youll have to decide for yourself just how far you want to pursue the discovery
of this beautiful mathematics at this time we will be presenting only the bare minimum necessary
to obtain the desired, general, real solutions to the SHO ODE below.
Here are the two linearly independent solutions:
x
+
(t) = X
+
e
+it
(780)
x
(t) = X
e
it
(781)
that follow, one for each possible value of . Note that we will always get n independent solutions
for an nth order ODE, because we will always have solve for the roots of an nth order characteristic
equation, and there are n of them! X
are the complex constants of integration since the solution

is complex already we might as well construct a general complex solution instead of a less general
one where the X
are real.
Given these two independent solutions, an arbitrary, completely general solution can be
made up of a sum of these two independent solutions:
x(t) = X
+
e
+it
+X
e
it
(782)
We now use a pair of True Facts (that you can read about and see proven in the wikipedia articles
linked above or in the online math review). First, let us note the Euler Equation:
e
i
= cos() +i sin() (783)
This can be proven a number of ways probably the easiest way to verify it is by noting the equality
of the taylor series expansions of both sides but we can just take it as given from here on in this
class. Next let us note that a completely general complex number z can always be written as:
z = x +iy
= |z| cos() +i|z| sin()
= |z|(cos() +i sin())
= |z|e
i
(784)
(where we used the Euler equation in the last step so that (for example) we can quite generally
write:
X
+
= |X
+
|e
+i
+
(785)
X
= |X
|e
i
(786)
170
http://www.phy.duke.edu/rgb/Class/math for intro physics.php There is an entire chapter on this: Complex
Numbers and Harmonic Trigonometric Functions, well worth a look.
for some real amplitude |X
| and real phase angles
171
.
If we substitute this into the two independent solutions above, we note that they can be written
as:
x
+
(t) = X
+
e
+it
= |X
+
|e
i
+
e
+it
= |X
+
|e
+i(t+
+
)
(787)
x
(t) = X
e
it
= |X
|e
i
e
it
= |X
|e
i(t+
)
(788)
Finally, we wake up from our mathematical daze, hypnotized by the strange beauty of all of
these equations, smack ourselves on the forehead and say But what am I thinking! I need x(t) to
be real, because the physical mass m cannot possibly be found at an imaginary (or general
complex) position!. So we take the real part of either of these solutions:
x
+
(t) = |X
+
|e
+i(t+
+
)
= |X
+
|(cos(t +
+
) +i sin(t +
+
))
= |X
+
| cos(t +
+
) (789)
and
x
(t) = |X
|e
i(t+
)
= |X
|(cos(t +
) i sin(t +
))
= |X
| cos(t +
) (790)
These two solutions are the same. They dier in the (sign of the) imaginary part, but have
exactly the same form for the real part. We have to gure out the amplitude and phase of the
solution in any event (see below) and we wont get a dierent solution if we use x
+
(t), x
(t), or any
linear combination of the two! We can nally get rid of the notation and with it, the last vestige
of the complex solutions we used as an intermediary to get this lovely real solution to the position
of (e.g.) the mass m as it oscillates connected to the perfect spring.
If you skipped ahead above, resume reading/studying here!
Thus:
x(t) = X
0
cos(t +) (791)
is the completely general solution to the SHO ODE of motion, equation 772 above, valid in any
context, including ones with a dierent context (and even a dierent variable) leading to a dierent
algebraic form for
2
.
A few nal notes before we go on to try to understand this solution. There are two unknown
real numbers in this solution, X
0
and . These are the constants of integration! Although we
didnt exactly integrate in the normal sense, we are still picking out a particular solution from an
innity of two-parameter solutions with dierent initial conditions, just as we did for constant
acceleration problems eight or nine weeks ago! If you like, this solution has to be able to describe
the answer for any permissible value of the initial position and velocity of the mass at time t = 0.
Since we can independently vary x(0) and v(0), we must have at least a two parameter family of
solutions to be able to describe a general solution
172
.
171
It doesnt matter if we dene X
with a negative phase angle, since
might be a positive or negative number

anyway. It can also always be reduced via modulus 2 into any interval 2 long, because e
i
is periodic.
172
In future courses, math or physics majors might have to cope with situations where you are given two pieces of
data about the solution, not necessarily initial conditions. For example, you might be given x(t
1
) and x(t
2
) for two
specied times t
1
and t
2
and be required to nd the particular solution that satised these as a constraint. However,
this problem is much more dicult and can easily be insucient data to fully specify the solution to the problem.
We will avoid it here and stick with initial value problems.
9.1.2: The Simple Harmonic Oscillator Solution
As we formally derived above, the solution to the SHO equation of motion is;
x(t) = X
0
cos(t +) (792)
where X
0
is called the amplitude of the oscillation and is called the phase of the oscillation. The
amplitude tells you how big the oscillation is at peak (maximum displacement from equilibrium);
the phase tells you when the oscillator was started relative to your clock (the one that reads t). Note
that we could have used sin(t+) as well, or any of several other forms, since cos() = sin(+/2).
But you knew that
173
.
X
0
and are two unknowns and have to be determined from the initial conditions, the givens
of the problem, as noted above. They are basically constants of integration just like x
0
and v
0
for
the one-dimensional constant acceleration problem. From this we can easily see that:
v(t) =
dx
dt
= X
0
sin(t +) (793)
and
a(t) =
d
2
x
dt
2
=
2
X
0
cos(t +) =
k
m
x(t) (794)
This last result proves that x(t) solves the original dierential equation and is where we
would have gotten directly if wed assumed a general cosine or sine solution instead of an exponential
solution at the beginning of the previous section.
Note Well!
An unfortunately commonly made mistake for SHO problems is for students to take F
x
=
ma = kx, write it as:
a =
k
m
x (795)
and then try to substitute this into the kinematic solutions for constant acceleration problems that
we tried very hard not to blindly memorize back in weeks 1 and 2. That is, they try to write (for
example):
x(t) =
1
2
at
2
+v
0
t +x
0
=
1
2
k
m
xt
2
+v
0
t +x
0
(796)
This solution is so very, very wrong, so wrong that it is deeply disturbing when students
write it, as it means that they have completely failed to understand either the SHO or how to
solve even the constant acceleration problem. Obviously it bears no resemblance to either the
correct answer or the observed behavior of a mass on a spring, which is to oscillate, not speed up
quadratically in time. The appearance of x on both sides of the equation means that it isnt even a
solution.
What it reveals is a student who has tried to learn physics by memorization, not by understanding,
and hasnt even succeeded in that. Very sad.
Please do not make this mistake!
-60
-40
-20
0
20
40
60
0 1 2 3 4 5
a
t
-8
-6
-4
-2
0
2
4
6
8
0 1 2 3 4 5
v
t
-1.5
-1
-0.5
0
0.5
1
1.5
0 1 2 3 4 5
x
t
Figure 117: Solutions for a mass on a spring started at x(0) = X
0
, v(0) = 0 at time t = 0 (so that
= 0). Note well the location of the period of oscillation, T = 1 on the time axis, one full cycle
from the beginning.
9.1.3: Plotting the Solution: Relations Involving
Since we are going to quite a bit with harmonic oscillators from now on, we should take a few
moments to plot x(t), v(t), and a(t).
We remarked above that omega had to have units of t
1
. The following are some True Facts
involving that You Should Know:
=
2
T
(797)
= 2f (798)
where T is the period of the oscillator the time required for it to return to an identical position and
velocity) and f is called the frequency of the oscillator. Know these relations instantly. They are
easy to gure out but will cost you valuable time on a quiz or exam if you dont just take the time
to completely embrace them now.
Note a very interesting thing. If we build a perfect simple harmonic oscillator, it oscillates at the
same frequency independent of its amplitude. If we know the period and can count, we have just
invented the clock. In fact, clocks are nearly always made out of various oscillators (why?); some of
the earliest clocks were made using a pendulum as an oscillator and mechanical gears to count the
oscillations, although now we use the much more precise oscillations of a bit of stressed crystalline
quartz (for example) and electronic counters. The idea, however, remains the same.
173
I hope. If not, time to review the unit circle and all those trig identities from 11th grade...
9.1.4: The Energy of a Mass on a Spring
As we evaluated and discussed in week 3, the spring exerts a conservative force on the mass m.
Thus:
U = W(0 x) =
_
x
0
(kx)dx =
1
2
kx
2
=
1
2
kX
2
0
cos
2
(t +) (799)
where we have arbitrarily set the zero of potential energy and the zero of the coordinate system to
be the equilibrium position
174
.
The kinetic energy is:
K =
1
2
mv
2
=
1
2
m(
2
)X
2
0
sin
2
(t +)
=
1
2
m(
k
m
)X
2
0
sin
2
(t +)
=
1
2
kX
2
0
sin
2
(t +) (800)
The total energy is thus:
E =
1
2
kX
2
0
sin
2
(t +) +
1
2
kX
2
0
cos
2
(t +)
=
1
2
kX
2
0
(801)
and is constant in time! Kinda spooky how that works out...
Note that the energy oscillates between being all potential at the extreme ends of the swing (where
the object comes to rest) and all kinetic at the equilibrium position (where the object experiences
no force).
This more or less concludes our general discussion of simple harmonic oscillators in the specic
context of a mass on a spring. However, there are many more systems that oscillate harmonically,
or nearly harmonically. Lets study another very important one next.
9.2: The Pendulum
The pendulum is another example of a simple harmonic oscillator, at least for small oscillations.
Suppose we have a mass m attached to a string of length . We swing it up so that the stretched
string makes a (small) angle
0
with the vertical and release it at some time (not necessarily t = 0).
What happens?
We write Newtons Second Law for the force component tangent to the arc of the circle of the
swing as:
F
t
= mg sin() = ma
t
= m
d
2
dt
2
(802)
where the latter follows from a
t
= (the angular acceleration). Then we rearrange to get:
d
2
dt
2
+
g
sin() = 0 (803)
174
What would it look like if the zero of the energy were at an arbitrary x = x
0
? What would the force and energy
look like if the zero of the coordinates where at the point where the spring is attached to the wall?
m
l
Figure 118: A simple pendulum is just a point like mass suspended on a long string and displaced
sideways by a small angle. We will assume no damping forces and that there is no initial velocity
into or out of the page, so that the motion is stricly in the plane of the page.
This is almost a simple harmonic equation. To make it one, we have to use the small angle
approximation:
sin() (804)
Then:
d
2
dt
2
+
g
=
d
2
dt
2
+
2
= 0 (805)
where we have dened
2
=
g
(806)
and we can just write down the solution:
(t) =
0
cos(t +) (807)
with =
_
g
.
Now you see the advantage of all of our hard work in the last section. To solve any SHO
problem one simply puts the dierential equation of motion (approximating as necessary) into the
form of the SHO ODE which we have solved once and for all above! We can then just write
down the solution and be quite condent that all of its features will be just like the features of
the solution for a mass on a spring.
For example, if you compute the gravitational potential energy for the pendulum for arbitrary
angle , you get:
U() = mg (1 cos()) (808)
This doesnt initially look like the form we might expect from blindly substituting similar terms into
the potential energy for mass on the spring, U(t) =
1
2
kx(t)
2
. k for the gravity problem is m
2
,
x(t) is (t), so:
U(t) =
1
2
mg
2
0
sin
2
(t +) (809)
is what we expect.
As an interesting and fun exercise (that really isnt too dicult) see if you can prove that these
two forms are really the same, if you make the small angle approximation 1 in the rst form!
This shows you pretty much where the approximation will break down as
0
is gradually increased.
For large enough , the period of a pendulum clock does depend on the amplitude of the swing. This
(and the next section) explains grandfather clocks clocks with very long penduli that can swing
very slowly through very small angles and why they were so accurate for their day.
9.2.1: The Physical Pendulum
In the treatment of the ordinary pendulum above, we just used Newtons Second Law directly to
get the equation of motion. This was possible only because we could neglect the mass of the string
and because we could treat the mass like a point mass at its end, so that its moment of inertia was
(if you like) just m
2
.
That is, we could have solved it using Newtons Second Law for rotation instead. If in gure
118 is positive (out of the page), then the torque due to gravity is:
= mg sin() (810)
and we can get to the same equation of motion via:
I = m
2
d
2
dt
2
= mg sin() =
d
2
dt
2
=
g
sin()
d
2
dt
2
+
g
sin() = 0
d
2
dt
2
+
2
=
d
2
dt
2
+
g
= 0 (811)
(where we use the small angle approximation in the last step as before).
m
l
R
M
Figure 119: A physical pendulum takes into account the fact that the masses that make up the
pendulum have a total moment of inertia about the pivot of the pendulum.
However, real grandfather clocks often have a large, massive pendulum like the one above pictured
in gure 119 a long massive rod (of length and uniform mass m) with a large round disk (of radius
R and mass M) at the end. Both the rod and disk rotate about the pivot with each oscillation; they
have angular momemtum. Newtons Law for forces alone no longer suces. We must use torque
and the moment of inertia (found using the parallel axis theorem) to obtain the frequency of the
oscillator
175
.
To do this we go through the same steps that I just did for the simple pendulum. The only real
dierence is that now the weight of both masses contribute to the torque (and the force exerted by
the pivot can be ignored), and as noted we have to work harder to compute the moment of inertia.
So lets start by computing the net gravitational torque on the system at an arbitrary (small)
angle . We get a contribution from the rod (where the weight acts at the center of mass of the
rod) and from the pendulum disk:
=
_
mg
2
+Mg
_
sin() (812)
175
I know, I know, you had hoped that you could nally forget all of that stressful stu we learned back in the weeks
we covered torque. Sorry. Not happening.
The negative sign is there because the torque opposes the angular displacement from equilibrium
and points into the page as drawn.
Next we set this equal to I, where I is the total moment of inertia for the system about the
pivot of the pendulum and simplify:
I = I
d
2
dt
2
=
_
mg
2
+Mg
_
sin() =
d
2
dt
2
=
_
mg
2
+Mg
_
I
sin()
d
2
dt
2
+
_
mg
2
+Mg
_
I
sin() = 0
d
2
dt
2
+
_
mg
2
+Mg
_
I
= 0 (813)
where we nish o with the small angle approximation as usual for pendulums. We can now recognize
that this ODE has the standard form of the SHO ODE:
d
2
dt
2
+
2
= 0 (814)
with
2
=
_
mg
2
+Mg
_
I
(815)
I left the result in terms of I because it is simpler that way, but of course we have to evaluate
I in order to evaluate
2
. Using the parallel axis theorem (and/or the moment of inertia of a rod
about a pivot through one end) we get:
I =
1
3
m
2
+
1
2
MR
2
+M
2
(816)
This is the moment of inertia of the rod plus the moment of inertia of the disk rotating about
a parallel axis a distance away from its center of mass. From this we can read o the angular
frequency:
2
=
4
2
T
2
=
_
mg
2
+Mg
_
1
3
m
2
+
1
2
MR
2
+M
2
(817)
With in hand, we know everything. For example:
(t) =
0
cos(t +) (818)
gives us the angular trajectory. We can easily solve for the period T, the frequency f = 1/T, the
spatial or angular velocity, or whatever we like.
Note that the energy of this sort of pendulum can be tricky, not because it is conceptually any
dierent from before but because there are so many symbols in the answer. For example, its potential
energy is easy enough it depends on the elevation of the center of masses of the rod and the disk.
The
U = (mgh +MgH) =
_
mg
2
+Mg
_
(1 cos()) (819)
where hopefully it is obvious that h = /2 (1 cos()) and H = (1 cos()) = 2h.
The kinetic energy is given by:
K =
1
2
I
_
d
dt
_
2
(820)
where I do not write
1
2
I
2
as usual because it confuses (the angular frequency of the oscillator,
roughly contant) and (t) (the angular velocity of the pendulum bob, which varies between 0 and
some maximum value in every cycle).
We can easily evaluate:
d
dt
=
0
sin(t +) (821)
so that
K =
1
2
I
2
2
0
sin
2
(t +) (822)
Recalling the denition of
2
above, this simplies to:
K =
1
2
_
mg
2
+Mg
_
2
0
sin
2
(t +) (823)
so that:
E
tot
= U +K
=
_
mg
2
+Mg
_
(1 cos()) +
1
2
_
mg
2
+Mg
_
2
0
sin
2
(t +) (824)
which is not obviously a constant.
We can, however, show that it is a constant for small angles (the only situation where our solution
is valid, actually). The trick is to use the Taylor series for the cosine function:
cos() = 1

2
2!
+

4
4!
+... (825)
and keep only the rst term in:
1 cos() =

2
2!
+

4
4!
+...

2
2
=
1
2
2
0
cos
2
(t +) (826)
You should now be able to see that in fact, the total energy of the oscillator is constant in the small
angle approximation.
Of course, it is actually constant even for large oscillations, but proving this requires solving the
exact ODE with the sin() in it. This ODE is a version of the Sine-Gordon equation and has an
elliptic integral for a solution that is way, way beyond the level of this course and indeed is right up
there at the edge of some serious (but as always, way cool) math. We will stick with small angles!
9.3: Damped Oscillation
So far, all the oscillators weve treated are ideal. There is no friction or damping. In the real world,
of course, things always damp down. You have to keep pushing the kid on the swing or they slowly
come to rest. Your car doesnt keep bouncing after going through a pothole in the road. Buildings
and bridges, clocks and kids, real oscillators all have damping.
Damping forces can be very complicated. There is kinetic friction, which tends to be independent
of speed. There are various uid drag forces, which tend to depend on speed, but in a sometimes
complicated way depending on the shape of the object and e.g. the Reynolds number, as ow around
it converts from laminar to turbulent. There may be other forces that we havent studied yet that
contribute at least weakly to damping
176
. So in order to get beyond a very qualitative description
of damping, were going to have to specify a form for the damping force (ideally one we can work
with, i.e. integrate).
176
Such as gravitational damping an oscillating mass interacts with its massive environment to very, very slowly
convert its organized energy into heat. Were talking slowly, mind you. Still, fast enough that the moon is gravita-
tionally locked with the earth over geological times, and e.g. tidal/gravitational forces heat the moon Europa (as it
orbits Jupiter) to the point where it is speculated that there is liquid water under the ice on its surface...
Damping fluid (b)
k
m
Figure 120: A smooth convex mass on a spring that is immersed in a suitable damping liquid
experiences a linear damping force due to viscous interaction with the uid in laminar ow. This
idealizes the forces to where we can solve them and understand semi-quantitatively how to describe
damped oscillation.
Well pick the simplest possible one, illustrated in gure 120 above a linear damping force
such as we would expect to observe in laminar ow around the oscillating object as long as it
moves at speeds too low to excite turbulence in the surrounding uid.
F
d
= bv (827)
As before (see e.g. week 2) b is called the damping constant or damping coecient. With
this form we can get an exact solution to the dierential equation easily (good), get a preview of
a solution well need next semester to study LRC circuits (better), and get a very nice qualitative
picture of damping even when the damping force is not precisely linear (best).
As before, we write Newtons Second Law for a mass m on a spring with spring constant k and
a damping force bv:
F
x
= kx bv = ma = m
d
2
x
dt
2
(828)
Again, simple manipulation leads to:
d
2
x
dt
2
+
b
m
dx
dt
+
k
m
x = 0 (829)
which is the standard form for a damped mass on a spring and (within fairly obvious substitutions)
for the general linearly damped SHO.
This is still a linear, second order, homogeneous, ordinary dierential equation, but now we
cannot just guess x(t) = X
0
cos(t) because the rst derivative of a cosine is a sine! This time
we really must guess that x(t) is a function that is proportional to its own rst derivative!
We therefore guess x(t) = X
0
e
t
as before, substitute for x(t) and its derivatives, and get:
_
2
+
b
m
+
k
m
_
X
0
e
t
= 0 (830)
As before, we exclude the trivial solution x(t) = 0 as being too boring to solve for (requiring
that X
0
= 0, that it) and are left with the characteristic equation for :
2
+
b
m
+
k
m
= 0 (831)
This quadratic equation must be satised in order for our guess to be a nontrivial solution to the
damped SHO ODE.
To solve for we have to use the dread quadratic formula:
=
b
m

_
b
2
m
2

4k
m
2
(832)
This isnt quite where we want it. We expect from experience and intuition that for weak
damping we should get an oscillating solution, indeed one that (in the limit that b 0) turns back
into our familiar solution to the undamped SHO above. In order to get an oscillating solution, the
argument of the square root must be negative so that our solution becomes a complex exponential
solution as before!
This motivates us to factor a 4k/m out from under the radical (where it becomes i
0
, where
0
=
_
k/m is the frequency of the undamped oscillator with the same mass and spring constant).
In addition, we simplify the rst term and get:
=
b
2m
i
0
_
1
b
2
4km
(833)
As was the case for the undamped SHO, there are two solutions:
x
(t) = X
e
b
2m
t
e
i
t
(834)
where
=
0
_
1
b
2
4km
(835)
This, you will note, is not terribly simple or easy to remember! Yet you are responsible
for knowing it. You have the usual choice work very hard to memorize it, or learn to do the
derivation(s).
I personally do not remember it at all save for a week or two around the time I teach it each
semester. Too big of a pain, too easy to derive if I need it. But here you must suit yourself either
memorize it the same way that youd memorize the digits of , by lots and lots of mindless practice,
or learn how to solve the equation, as you prefer.
Without recapitulating the entire argument, it should be fairly obvious that can take the real
part of their sum, get formally identical terms, and combine them to get the general real solution:
x
(t) = X
0
e
b
2m
t
cos(
t +) (836)
where X
0
is the real initial amplitude and phi determines the relative phase of the oscillator. The
only two dierences, then, are that the frequency of the oscillator is shifted to
and the whole

solution is exponentially damped in time.
9.3.1: Properties of the Damped Oscillator
There are several properties of the damped oscillator that are important to know.
The amplitude damps exponentially as time advances. After a certain amount of time, the
amplitude is halved. After the same amount of time, it is halved again.
The frequency
is shifted so that it is smaller than

0
, the frequency of the identical but
undamped oscillator with the same mass and spring constant.
The oscillator can be (under)damped, critically damped, or overdamped. These terms
are dened below.
Several of these properties are illustrated in gure 121. In this gure the exponential envelope
of the damping is illustrated this envelope determines the maximum amplitude of the oscillation
as the total energy of the oscillating mass decays, turned into heat in the damping uid. The period
T
is indeed longer, but even for this relatively rapid damping, it is still nearly identical to T
0
! See if
-1.5
-1
-0.5
0
0.5
1
1.5
0 2 4 6 8 10
x
t
Figure 121: Two identical oscillators, one undamped (with
0
= 2, or if you prefer with an
undamped period T
0
= 1) and one weakly damped (b/m = 0.3).
you can determine what
is in terms of
0
numerically given that
0
= 2 and b/m = 0.3. Pretty
close, right?
This oscillator is underdamped. An oscillator is underdamped if
is real, which will be true

if:
b
2
4m
2
=
_
b
2m
_
2
<
k
m
=
2
0
(837)
An underdamped oscillator will exhibit true oscillations, eventually (exponentially) approaching zero
amplitude due to damping.
The oscillator is critically damped if
is zero. This occurs when:

b
2
4m
2
=
_
b
2m
_
2
=
k
m
=
2
0
(838)
The oscillator will then not oscillate it will go to zero exponentially in the shortest possible time.
This (and barely underdamped and overdamped oscillators) is illustrated in gure 122.
The oscillator is overdamped if
is imaginary, which will be true if

b
2
4m
2
=
_
b
2m
_
2
>
k
m
=
2
0
(839)
In this case is entirely real and has a component that damps very slowly. The amplitude goes
to zero exponentially as before, but over a longer (possibly much longer) time and does not oscillate
through zero at all.
Note that these inequalities and equalities that establish the critical boundary between oscil-
lating and non-oscillating solutions involve the relative size of the inverse time constant associated
-1.5
-1
-0.5
0
0.5
1
1.5
0 0.5 1 1.5 2
x
t
Figure 122: Three curves: Underdamped (b/m = 2) barely oscillates. T
is now clearly longer

than T
0
. Critically damped (b/m = 4) goes exponentially to zero in minimum time. Overdamped
(b/m = 8) goes to zero exponentiall, but much more slowly.
with damping compared to the inverse time constant (times 2) associated with oscillation. When
the former (damping) is larger than the latter (oscillation), damping wins and the solution is over-
damped. When it is smaller, oscillation wins and the solution is underdamped. When they are
precisely equal, oscillation precisely disappears, k isnt quite strong enough compared to b to give
the mass enough momentum to make it across equilibrium to the other side. Keep this in mind
for the next semester, where exactly the same relationship exists for LRC circuits, which exhibit
damped simple harmonic oscillation that is precisely the same as that seen here for a linearly damped
mass on a perfect spring.
Example 9.3.1: Car Shock Absorbers
This example isnt something one can compute, it is something you experience nearly every day, at
least if you drive or ride around in a car.
A cars shock absorbers are there to reduce the bumpiness of a bumpy road. Shock absorbers
are basically big powerful springs that carry your car suspended in equilibrium between the weight
of the car and the spring force.
If your wheels bounce up over a ridge in the road, the shock absorber spring compresses, storing
the energy from the collision briey and then giving it back without the car itself reacting.
However, if the spring is not damped, the subsequent motion of the car would be to bounce up and
down for many tens or hundreds of meters down the road, with your control over the car seriously
compromised. For that reason, shock absorbers are strongly damped with a suitable uid (basically
a thick oil).
If the oil is too thick, however, the shock absorbers become overdamped. The car takes so long
to come back to equilibrium after a bump that compresses them that one rides with ones shocks
constantly somewhat compressed. This reduces their eectiveness and one feels every bump in the
road, which is also not great for safe control.
Ideally, then, your cars shocks should be barely underdamped. This will let the car bounce
through equilibrium to where it is almost in equilibrium even faster than a perfectly critically
damped shock and yet still rapidly damp to equilibrium right away, ready for the next shock.
So heres how to test the shocks on your car. Push down (with all of your weight) on each of the
corner fenders of your car, testing the shock on that corner. Release your weight suddenly so that
it springs back up towards equilibrium.
If the car bounces once and then returns to equilibrium when you push down on a fender
and suddenly release it, the shocks are good. If it bounces three or four time the shocks are too
underdamped and dangerous as you could lose control after a big bump. If it doesnt bounce up
and back down at all at all and instead slowly oozes back up to level from below, it is overdamped
and dangerous, as a succession of sharp bumps could leave your shocks still compressed and unable
to absorb the impact of the last one and keep your tires still on the ground.
Damped oscillation is ubiquitous. Pendulums, once started, oscillate for only a while before
coming to rest. Guitar strings, once plucked, damp down to quiet again quite rapidly. Charges
in atoms can oscillate and give o light until the self-force exerted by their very radiation they
emit damps the excitation. Cars need barely underdamped shock absorbers. Very tall buildings
(skyscrapers) in a city usually have specially designed dampers in them as well to keep them from
swaying too much in a strong wind. Houses are build with lots of damping forces in them to keep
them quiet. Fully understanding damped (and eventually driven) oscillation is essential to many
sciences as well as both mechanical and electrical engineering.
9.4: Damped, Driven Oscillation: Resonance
By and large, most of you who are reading this textbook directly experienced damped, driven
oscillation long before you were ve years old, in some cases as early as a few months old! This
is the physics of the swing, among other things. Babies love swings one of our sons was colicky
when he was very young and would sometimes only be able to get some peace (so we could get some
too!) when he was tucked into a wind-up swing. Humans of all ages seem to like a rhythmic swaying
motion; children play on swings, adults rock in rocking chairs.
Damped, driven, oscillation is also key in another nearly ubiquitous aspect of human life the
clock. Nature provides us with a few natural clocks, the most prominent one being the diurnal
clock associated with the rotation of the Earth, read from observing the orientation of the sun,
moon, and night sky and translating it into a time.
The human body itself contains a number of clocks including the most accessible one, the heart-
beat. Although the historical evidence suggests that the size of the second is derived from systematic
divisions of the day according to numerological rules in the extremely distant past, surely it is no
accident that the smallest common unit of everyday time almost precisely matches the human heart-
beat. Unfortunately, the normal human heartbeat varies by a factor of around three as one moves
from resting to heavy exercise, a range that is further increased by the abnormal heartbeat of peo-
ple with cardiac insuciency, cardioelectric abnormalities, or taking various drugs. It isnt a very
precise clock, in other words, although as it turns out it played a key role in the development of
precise clocks, which in turn played a crucial role in the invention of physics.
Here, there is an interesting story. Galileo Galilei used his own heartbeat to time the oscillations
of a large chandelier in the cathedral in Pisa around 1582 and discovered one of the key properties
of the oscillations of a pendulum
177
(discussed above), isochronism: the fact that the period of a
pendulum is independent of both the (small angle) amplitude of oscillation and the mass that is
oscillating. This led Galileo and a physician friend to invent both the metronome (for musicians)
and a simple pendulum device called the pulsilogium to use to time the pulse of patients! These were
the worlds rst really accurate clocks, and variations of them eventually became the pendulum clock.
Carefully engineered pendulum clocks that were compensated for thermal expansion of their rods,
the temperature-dependent weather dependent buoyant force exerted by the air on their pendulum,
friction and damping were the best clocks in the world and used as international time standards
through the late 1920s and early 1930s, when they were superceded by another, still more accurate,
damped driven oscillator the quartz crystal oscillator.
Swings, springs, clocks and more driven, resonant harmonic oscillation has been a part of
everyday experience for at least two or three thousand years. Although it isnt obvious at rst,
ordinary walking at a comfortable pace is an example of damped, driven oscillation and resonance.
Military marching the precise timing of the pace of soldiers in formation was apparently
invented by the Romans. Indeed, this invention gives us one of our most common measures of
distance, the mile. The word mile is derived from milia passuum a thousand paces, where a pace
is a complete cycle of two steps with a length slightly more than ve feet and Roman armies, by
marching at a xed standard pace, would consistently cover twenty miles in ve summer hours,
or by increasing the length of their pace slightly, twenty four miles in the same number of hours.
Note well that the mile was originally a decimal quantity a multiple of ten units! Alas, the pace
did not become the unit of length in England the yard was instead, dened (believe it or not)
in terms of the width of a grain of barleycorn
178
. Yes folks, you heard it rst here there is an
intimate connection between the making of beer (barley is one of the oldest cultivated grains and
was used primarily for making beer and as an animal fodder dating back to neolithic times) and the
English units of length.
The proper denition of a mile in the English system is thus the length of 190080 grains of
barleycorn!! Thats almost exactly four cubic feet of barley, which is enough to make roughly
20 gallons of beer. Coincidence? I dont think so. And people wonder why the rest of the world
considers Americans and the British to be mad...
Roman soldiers also discovered another important aspect of resonance it can destroy human-
engineered structures! The standard marching pace of the Roman soldiers was 4000 paces per hour,
just over two steps per second. This pace could easily match the natural frequency of oscillation of
the bridges over which the soldiers marched, and driving a bridge oscillation, at resonance, with the
weight of a hundred or so men was more than enough to destroy the bridge. Since Roman times,
then, although soldiers march with discipline whenever they are on the road, they break cadence
and cross bridges with an irregular, random step lest they nd themselves and the remnants of the
bridge in the water, trying to swim in full armor.
This sort of resonance also aects the stability of buildings and bridges today earthquakes can
drive resonances of either one, the wind can drive resonances of either one. Building a sound bridge or
tall building requires a careful consideration and damping of the natural frequencies of the structure.
The Tacoma Bridge Disaster
179
serves as a modern-times example of the consequences of
177
Wikipedia: http://www.wikipedia.org/wiki/pendulum. Id strongly recommend that students read through this
article, as it is absolutely fascinating. At this point you should already understand that the development of physics
required good clocks! It quite literally could not have happened without them, and good clocks, suciently accurate
to measure e.g. the variations in the apparent gravitational eld with height and position around the world, did not
exist before the pendulum clock was conceived of and partially invented by Galileo in the late 1500s and invented
in fact by Christiaan Huygens in 1656. Properties of the motion of the pendulum were key elements in Newtons
invention of both the law of gravitation and his physics.
178
Wikipedia: http://www.wikipedia.org/wiki/Yard. Yet another fascinating article three barley grains to the inch,
twelve inches to the foot, three feet to the yard, and 22 220 = 4840 square yards make an acre.
179
Wikipedia: http://www.wikipedia.org/wiki/Tacoma Narrows Bridge (1940). Again, a marvelous article that con-
tains a short clip of the bridge oscillating in resonance to collapse. Note that the resonance in question was due more
failing to design for resonance. In more recent times part of the devastation caused by the Haiti
Earthquake
180
was caused by the lack of earthquake-proong protection against earthquake-driven
resonances in the cheap construction methods used in buildings of all sorts.
From all of this, it seems like establishing at the very least a semi-quantitative understanding of
resonance is in order, and as usual math, physics or engineering students will need to go the extra
190080 barleycorn grain lengths and work through the math properly. To manage this, we need to
begin with a model.
9.4.1: Harmonic Driving Forces
Lets start by thinking about what you all know from learning to swing on a swing. If you just sit on
a swing, nothing happens. You have to pump the swing. Pumping the swing is accomplished by
pulling the ropes and shifting your weight at the highest point of each oscillation so that the force
exerted by the rope no longer passes through your center of mass and hence can exert a torque in the
current direction of rotation. You know from experience that this torque must be applied periodically
at a frequency that matches the natural frequency of the swing and in phase with the motion of the
swing in order to increase the amplitude of the swinging oscillation. If you simply jerk backwards
and forwards with the same motions as those used to pump right but at the wrong (non-resonant)
frequency or randomly, you dont ever build up much amplitude. If you apply the torques with the
wrong phase you will not manage to get the same amplitude that youd get pumping in phase with
the motion.
Thats really it, qualitatively. Resonance consists of driving an oscillator at its natural frequency,
in phase with the motion, to achieve the greatest possible oscillation amplitude (ultimately limited
by things like practical physical constraints and damping).
A pendulum, however, isnt a good system for us to use as a quantitative model. For one thing,
it isnt really a harmonic oscillator we automatically adjust our pumping to remain resonant as
we swing closer and closer to the angle of /2 where the swing chains become limp and we can no
longer cheat some torque out of the combination of the pivot force and gravity, but the frequency
itself starts to signicantly change as the small angle approximation breaks down, and breaking it
down is the point of swinging on a swing! Who wants to swing only through small angles!
The kind of force we exert in swinging a swing isnt too great, either. It is hardly smooth we
really only pump at all very close to the top of our swinging motion (on both sides) in between we
just coast. Wed prefer instead to assume a periodic driving force that is mathematically relatively
easy to treat.
These two things taken together more or less uniquely determine the best model for us to use to
understand resonance. This is an underdamped mass on a spring being driven by an external
harmonic driving force, all in one dimension:
F
ext
x
(t) = F
0
cos(t) (840)
In this expression, both the angular frequency and the amplitude of the applied force are free
parameters. Note especially that is not necessarily the natural or shifted frequency of the mass
on the spring it can be anything, just as you can push your little brother or sister on a swing at
the right frequency to build up their swing amplitude or the wrong one to jerk them back and forth
and rattle their teeth without building up much amplitude at all. Wed like to be able to derive the
solution for both of these general cases and everything in between!
to the driving of several wave resonances rather than a simple harmonic oscillator resonance, but the principle is
exactly the same.
180
Wikipedia: http://www.wikipedia.org/wiki/2010 Haiti earthquake.
Damping fluid (b)
motor at
k
m
through amplitude A
0
Plate oscillates
frequency
Figure 123: A small frequency-controlled motor drives the xed end of a spring attached to a
damped mass up and down through a (variable) amplitude A
0
at (independently adjustable) angular
frequency , thereby exerting an additional harmonic driving force on the mass.
Although there are a number of ways one can exert such a force in the real world, one relatively
simple one is to drive the xed end of the spring harmonically through some amplitude e.g.
A(t) = A
0
cos(t); this will modulate the total force exerted by the spring on the mass in just the
right way:
F
x
(t) = k(x +A(t)) bv
= kx bv +kA
0
cos(t)
= kx bv +F
0
cos(t) (841)
where weve included the usual linear damping force bv. The minus sign is chosen deliberately
to make the driving force positive on the right in the inhomogeneous ODE obtained below. The
apparatus we might use to observe this under controlled circumstances in the lab is drawn in gure
123.
Putting this all together, our equation of motion can be written:
ma = kx bv +F
0
cos(t)
m
d
2
x
dt
2
+b
dx
dt
+kx = F
0
cos(t)
d
2
x
dt
2
+
b
m
dx
dt
+
k
m
x =
F
0
m
cos(t)
d
2
x
dt
2
+
b
m
dx
dt
+
2
0
x =
F
0
m
cos(t)
d
2
x
dt
2
+ 2
_
b
2m
0
_
0
dx
dt
+
2
0
x =
F
0
m
cos(t)
d
2
x
dt
2
+ 2
0
dx
dt
+
2
0
x =
F
0
m
cos(t) (842)
where as before
0
=
_
k/m is the natural frequency of the undamped oscillator and where we
have written it in terms of the damping ratio:
=
b
2m
0
(843)
that was the key parameter that determined whether or not a damped oscillator was underdamped,
critically damped or overdamped (for < 1, = 1, > 1 respectively). This form makes it easier to
write the resonance solutions generically so that they can be applied to dierent problems.
This is a second order, linear, inhomogeneous ordinary dierential equation the
wordk inhomogeneous basically means that there is a function of time instead of 0 on the right.
Although we will not treat it in this course, it is possible to write arbitrary functions of time as
a superposition of harmonic functions of time using either fourier series or more generally, fourier
analysis
181
. This means that the solution we develop here (however crudely) can be transformed
into part of a general solution, valid for an arbitrary driving force F(t)! One day, maybe, you
182
might learn how, but obviously that would cause our brains to explode to attempt it today, unless
you are a math super-genius or at least, have learned a lot more math than undergrads usually have
learned by the time they take this course.
9.4.2: Solution to Damped, Driven, Simple Harmonic Oscillator
We will not, actually, fully develop this solution this semester. It is a bit easier to do so in the
context of LRC circuits next semester, and youll have had the chance to sleep on all that youve
learned about driven oscillation this semester and will discover that, magically, it is somehow easier
and less intimidating the second time around. Math like this is best learned in several passes with
a bit of time for our brains to digest in between.
First, let us really learn an important property of inhomogeneous ordinary dierential equations.
Suppose we have both:
d
2
x
H
dt
2
+ 2
0
dx
H
dt
+
2
0
x
H
= 0 (844)
(the homogeneous ODE for a damped SHO) with solution x
H
(t) given in the previous section, and
also have:
d
2
x
I
dt
2
+ 2
0
dx
I
dt
+
2
0
x
I
=
F
0
m
cos(t) (845)
(the inhomogeneous ODE for a damped harmonically driven SHO) with solution x
I
(t) yet to be
determined. Suppose also that we have found at least one solution to the inhomogenous ODE x
p
(t),
usually referred to as a particular solution. Then it is easy to show from the linearity of the ODE
that:
x
I
(t) = x
H
(t) +x
p
(t) (846)
also solves the inhomogeneous equation:
d
2
x
I
dt
2
+ 2
0
dx
I
dt
+
2
0
x
I
=
F
0
m
cos(t)
d
2
(x
H
+x
p
)
dt
2
+ 2
0
d(x
H
+x
p
)
dt
+
2
0
(x
H
+x
p
) =
F
0
m
cos(t)
_
d
2
x
H
dt
2
+ 2
0
dx
H
dt
+
2
0
x
H
_
+
_
d
2
x
p
dt
2
+ 2
0
dx
p
dt
+
2
0
x
p
_
=
F
0
m
cos(t)
0 +
F
0
m
cos(t) =
F
0
m
cos(t) (847)
which is true as an identity by hypothesis (that x
p
solves the inhomogeneous ODE).
That is, given one particular solution to the inhomogeneous linear ODE, we can generate an
innite family of solutions by adding to it any solution we like to the homogeneous linear ODE. This
(homogeneous) solution has two free parameters (constants of integration) that can be adjusted to
181
Wikipedia: http://www.wikipedia.org/wiki/Fourier Analysis.
182
For a very small statistical value of you, one that pretty much looks like not you unless you are a math or
physics major or perhaps an electrical engineering student.
satisfy arbitrary initial conditions, the inhomogeneous solution inherits these constants of integration
and freedom, and the mathematical gods are thus pleased.
The solution to the homogeneous equation, however, is exponentially damped. If we wait long
enough, no matter how we start the system o initially, the homogeneous solution will get as small
as we like basically, it will disappear and well be left only with the particular solution. For
that reason, in the context of driven harmonic oscillation the homogeneous solution is called the
transient solution and depends on initial conditions, the particular solution is called the steady
state solution and does not depend on the initial conditions!
We can then search for a steady state solution that does not contain any free parameters but is
completely determined by the givens of the problem independent of the initial conditions!
Although it is not immediately obvious, given a harmonic driving force at a particular frequency
, the steady state solution must also be a harmonic function at the same frequency . This is
part of that deep math mojo that comes out of fourier transforming not only the driving force, but
the entire ODE. The latter eectively reduces the entire ODE to an algebraic problem. It is by
far easiest to see how this goes by using a complex exponential driving force and solution and then
taking the real part at the end, but we will skip doing this for now. Instead I will point out some
true facts about the solution one obtains when one does it all right and completely. Interested
parties can always look ahead into the companion volume for this course, Intro Physics 2, in the
chapter on AC circuits to see how it really should be done.
a) The steady state solution to the driven SHO is:
x
p
(t) = Acos(t +) (848)
where:
A =
F
0
/m
_
(
2
2
0
)
2
+ (2
0
)
2
(849)
and the phase angle is:
= tan
1
_
2
0
2
0
_
(850)
b) The average power delivered to the mass by the driving force is a quantity of great interest.
This is the rate that work is being done on the mass by the driving force, and (because it is
in steady state) is equal to the rate that the damping force removes the energy that is being
added. Evaluating the power is straightforward but tedious for most of you well postpone
this until next semester. The two things I want everybody to learn this semester are that the
average power is proportional to the amplitude squared:
P
avg
() A
2
(851)
so that
P
avg
() =
CF
2
0
/m
2
(
2
2
0
)
2
+ (2
0
)
2
(852)
for some constant C.
c) This shape of P
avg
() is very important to semi-quantitatively understand. It is (for weak
damping) a sharply peaked curve with the peak centered on
0
, the natural frequency of the
undamped oscillator. You can see from the expression given for P
avg
why this would be so
at =
0
the quantity in the denominator is minimum. This function is plotted in gure 124
below.
d) The sharpness of the resonance is controlled by the dimensionless Q-factor, or quality factor,
of the resonance. Q for the driven SHO is dened to be:
Q =

0
(853)
0
5
10
15
20
0 0.5 1 1.5 2
P
o
w
e
r
Resonance of a Driven Harmonic Oscillator

Q = 3
Q = 10
Q = 20
Figure 124: A set of generic resonance curves illustrating the average power P() for resonances
with Q =
0
/ = 3, 10, 20. Recall that is the full width at half maximum. These gures
have been scaled so that
0
= 1 in all three cases, so that the full width of e.g. the Q = 20 curve
(with the sharpest/highest peak) is 1/20 at P = 10. P is the average power added to the oscillator
by the driving force, which in turn in steady state motion must equal the average power lost to to
dissipative drag forces.
where is the full width of P
avg
() at half-maximum! To nd , one must use:
P
avg
() =
P
max
2
(854)
and solve for the two roots where the equality is satised. The dierence between them is the
full width.
e) In this way one can (for weak damping) determine that:
Q =
1
2
(855)
(which is one of the reasons dening dimensionless is convenient). is basically the inverse
of Q, so that the larger Q is, the weaker the damping and the better the resonance will be!
You should be able to draw, and understand, P
avg
() for any given Q in the range from 3 to
maybe 20 visibly to scale, specically so that Q
0
/ in your graph. Practice this on your
homework! I nearly always ask this on one exam or quiz in addition to the homework.
The point of Q is that oscillators with low Q quickly damp and dont build up much amplitude
even from a perfectly resonant =
0
driving force. This is good building bridges and skyscrapers.
High Q means you get a large amplitude, eventually, even from a small but perfectly resonant
driving force. This is good for jackhammers, musical instruments, a good walking pace, and many
other things.
9.5: Elastic Properties of Materials
It is now time to close a very important bootstrapping loop in your understanding of physics. From
the beginning, we have used a number of force rules like the normal force, and Hookes Law
because they were simple rules that we could directly observe and use to help us both understand
ubiquitous phenomena and learn to use Newtons Laws to quantitatively describe many of them.
We had to do this rst, because until you understand force, work, energy, equations of motion
and conservation principles basic mechanics you cannot start to understand the microscopic
basis for the macroscopic rules that govern both everyday Newtonian physics and things like
thermodynamics and chemistry and biology (all of which have rules at the macroscopic scale that
follow from physics at the microscopic scale).
Weve done a bit of this along the way thought about microscopic causes of friction and drag
forces, derived the ways in which a macroscopic object can be thought of as a pointlike microscopic
object located at its center of mass (and ways it cannot, e.g. when describing its rotation). Weve
even thought a bit about things like compressibility of uids, but we havent really thought about
this enough.
Lets x that.
To do so, we need a microscopic model for a solid, in particular for the molecular bonds within
a solid.
9.5.1: Simple Models for Molecular Bonds
Consider, then a very crude microscopic model for a solid. We know that this solid is made up of
many elementary particles, and that those elementary particles interact to form nucleons, which
bind together to form nuclei, which bind elementary electrons to form atoms and that the atoms in
turn are bound together by short range (nearest neighbor) interatomic forces chemical bond if
you like to actually form the solid.
From both the text and some of the homework problems you should have learned that a generic
potential energy associated with the interaction of a pair of atoms with a chemical bond between
them is given by a short range repulsion followed by a long range attraction. We saw a
potential energy form like this as the eective potential energy in gravitation (the form that
contained an angular momentum barrier with L
2
in it), but the physical origin of the terms is very
dierent.
The repulsion in the molecular potential energy comes from rst the Pauli exclusion princi-
ple
183
in quantum mechanics (that makes the interpenetration of the electron clouds surrounding
atoms energetically expensive as the underlying quantum states rearrange to satisfy it) plus the
penetration of a screened Coulomb interaction. The former is truly beyond the scope of this
course it is quantum magic associated with electrons
184
as fermions
185
, where Im inserting
wikipedia links to lots of these terms so that interested students can use them as the starting points
of wikipedia romps, as a lot of this is all absolutely fascinating and is one of the reasons physicists
love physics, it is all just so very amazing.
Next semester you will learn about Coulombs Law
186
, that describes the forces between two
charged particles, and (using Gausss Law
187
) you will be able to understand how the electron cloud
normally screens the nuclei as eventually the rearrangement brings increasingly bare nuclei close
enough so that the atoms have a very strong net repulsion.
One thing that we wont cover then, however, is how this simple/naive model, which leads to two
atoms not interacting at all as soon as they are not touching (electron clouds interpenetrating)
is replaced by one where two neutral atoms have a residual long range interaction due to dipole-
183
Wikipedia: http://www.wikipedia.org/wiki/Pauli Exclusion Principle.
184
Wikipedia: http://www.wikipedia.org/wiki/Electron.
185
Wikipedia: http://www.wikipedia.org/wiki/Fermion.
186
Wikipedia: http://www.wikipedia.org/wiki/Coulombs Law.
187
Wikipedia: http://www.wikipedia.org/wiki/Gauss Law.
induced dipole forces, leading to what is called a London dispersion force
188
. This force has the
generic form of an attractive C/r
6
for a rather complicated C that parameterizes various details
of the interatomic interaction.
Physicists and quantum chemists or engineers often idealize the exact/quantum theory with an
approximate (semi)classical potential energy function that models these important generic features.
For example, two very common models (one of which we already briey explored in week 4, homework
problem 4) is the Lennard-Jones potential
189
(energy):
U
LJ
(r) = U
min
_
2
_
r
b
r
_
6
_
r
b
r
_
12
_
(856)
In this function, U
min
is the minimum of the potential energy curve (evaluated with the usual
convention that r is U
LJ
() = 0), r
b
is the radius where the minimum occurs (and hence is
the equilibrium bond length), and r is along the bond axis. This function is portrayed as the solid
line in gure 125.
An alternative is the Morse potential
190
(energy):
U
M
(r) = U
min
_
1 e
a(rr
b
)
_
2
(857)
In this expression U
min
and r
b
have the same meaning, but they are joined by a, a parameter than
sets the width of the well. The only problem with this form of the potential is that it is dicult to
compare it to the Lennard-Jones potential above because the LJ potential is zero at innity and the
Morse potential is U
min
at in innity. Of course, potential energy is always only dened within an
additive constant, so I will actually subtract a constant U
min
and display:
U
M
(r) = U
min
+U
min
_
1 e
a(rr
b
)
_
2
) (858)
as the dashed line in gure 125 below. This potential now correctly vanishes at .
I should emphasize that neither of these potentials is in any sense a law of nature. They are
eective potentials, idealized model potentials that have close to the right shape and that can be
used to study and understand molecular bonding in a semi-quantitative way good enough to be
compared to experimental results in an understandable if approximate way, but hardly exact.
The exact (relevant) laws of nature are those of electromagnetism and quantum mechanics, where
the many electron problem must be solved, which is very dicult. The problem rapidly becomes
too complex to really be solvable/computable as the number of electrons grows and more atoms are
involved. So even in quantum mechanics people not infrequently work with Lennard-Jones or Morse
potentials (or any of a number of other related forms with more or less virtue for any particular
problem) and sacrice precision in the result for computability.
In our case, even these relatively simple eective potentials are too complex. We therefore take
advantage of something I have written about extensively up above. Nearly all potential energy
functions that have a true minimum (so that there is a force equilibrium there, recalling that the
force is the negative slope (gradient) of the potential energy function) vary quadratically for small
displacements from equilibrium. A quadratic potential energy corresponds to a harmonic oscillator
and a linear restoring force. Therefore all solids made up of atoms bound by interactions like the
eective molecular potential energies above will inherit certain properties from the tiny springs of
the bonds between them!
188
Wikipedia: http://www.wikipedia.org/wiki/London dispersion force. This force is due to Fritz London who was
a Duke physicist of great reknown, although he derived this force from second-order perturbation theory long before
he ed the rise of the Nazi party in Germany and eventually moved to the United States and took a position at Duke.
London is honored with an special invited London Lecture at Duke every year. Just an interesting True Fact for
my Duke students.
189
Wikipedia: http://www.wikipedia.org/wiki/Lennard-Jones potential.
190
Wikipedia: http://www.wikipedia.org/wiki/Morse potential.
-1
-0.5
0
0.5
1
1.5
2
0 0.5 1 1.5 2
U
(
r
)
r
Figure 125: Two generic classical potential energy functions associated with atomic bonds on a
common scale U
min
= 1, r
b
= 1.0, and a = 6.2, the latter a value that makes the two potential
have roughly the same force constant for small displacements.The solid line is the Lennard-
Jones potential U
L
(r) and the dashed line is the Morse potential U
M
(r). Note that the two are
very closely matched for short range repulsion, but the Morse potential dies o faster than the 1/r
6
London form expected at longer range.
9.5.2: The Force Constant
In both of the cases above, we can derive a force constant eective spring constant of the
interatomic bonds that hold atoms in their place relative to a neighboring atom. The easiest way to
do so is to do a Taylor Series Expansion
191
of the potential energy function around r
b
. This is:
U(x
0
+ x) = U(x
0
) +
_
dU
dx
_
x=x
0
x +
1
2!
_
d
2
U
dx
2
_
x=x
0
x
2
+... (859)
At a stable equilibrium point x
0
the force vanishes:
F
x
(x
0
) =
_
dU
dx
_
x=x
0
= 0 (860)
so that:
U(x
0
+ x) = U(x
0
) +
1
2!
_
d
2
U
dx
2
_
x=x
0
x
2
+... (861)
We can now identify this with the form of a potential energy equation for a mass on a spring
in a coordinate system where the equilibrium position of the spring is at x
0
192
:
U(x
0
+ x) = U(x
0
) +
1
2!
_
d
2
U
dx
2
_
x=x
0
x
2
+... = U
0
+
1
2
k
e
x
2
(862)
where
k
e
=
_
d
2
U
dx
2
_
x=x
0
(863)
191
Wikipedia: http://www.wikipedia.org/wiki/Taylor series expansion.
192
Remember, any potential energy function is dened only to within an additive constant, so the constant term
U
0
simply sets the scale for the potential energy without aecting the actual force derived from the potential energy.
The force is what makes things happen it is, in a sense, all that matters.
What this means is that any mass at a stable equilibrium point will usually behave
like a mass on a spring for motion close to the equilibrium point! If pulled a short
distance away and released, it will oscillate nearly harmonically around the equilibrium. The terms
usually and nearly can be made more precise by considering the neglected third and higher
order derivatives in the Taylor series as long as they are negligible compared to the second order
derivative with its quadratic x
2
dependence, the approximation will be a good one.
We have already seen this to be true and used it for the simple and physical pendulum problem,
where we used a Taylor series expansion for the force or torque and for the energy and kept only
the leading order term the small angle approximation for sin() and cos(). You will see it in
homework problems next semester as well, if you continue using this textbook, where you will from
time to time use the binomial expansion (the Taylor series for a particular form of polynomial) to
transform a force or potential energy associated with a particle near equilibrium into the form that
reveals the simple harmonic oscillator within, so to speak.
At this point, however, we wish to put this idea to a dierent use to help us bridge the gap
between microscopic forces that hold a rigid object together and that objects response to forces
applied to it. After all, we know that there is no such thing as a truly rigid object. Steel is pretty
hard, but with enough force we can bend solid steel, we can stretch or compress it, we can turn it
into a spring, we can fracture it. Bone is also pretty hard and it does exactly the same thing: bend,
stretch, compress, fracture. The physics of bending, stretching, compressing, and fracturing a solid
object is associated with the application of stress to the object. Lets see how.
9.5.3: A Microscopic Picture of a Solid
Let us consider a solid piece of some simple material. If we look at pure elemental solids for
example metals we often nd that when they form a solid the atoms arrange themselves into a
regular lattice that is close packed arranged so that the atoms more or less touch each other
with a minimum of wasted volume. There are a number of kinds of lattices that appear (determined
by the subtleties of the quantum mechanical interactions between the atoms and hence beyond the
scope of this course) but in many cases the lattice is a variant of the cubic lattice where there are
atoms on the corners of a regular cartesian grid in three dimensions (and sometimes additional atoms
in the center of the cubes or on the faces of the cubes).
Not all materials are so regular. Materials made out of a mixture of atoms, out of molecules
made of a mixture of atoms, out of a mixture of molecules, or even out of living cells made out of
a mixture of molecules. The resulting materials can be ordered, structured (not exactly the same
thing as ordered, especially in the case of solids formed by life processes such as bone or coral), or
disordered (amorphous).
As usual, we will deal with all of this complexity by ignoring most of it for now and considering
an ideal case where a single kind of atoms lined up in a regular simple cubic lattice is sucient
to help us understand properties that will hold, with dierent values of course, even for amorphous
or structured solids. This is illustrated in gure 126, which is basically a mental cartoon model for
a generic solid lots of atoms in a regular cubic lattice with a cube side a, where the interactomic
forces that hold each atom in position is represented by a spring, a concept that is valid as long as
we dont compress or stretch these interatomic bonds by too much.
We need to quantify the numbers of atoms and bonds in a way that helps us understand how
stretching or compressing forces are distributed among all of the bonds. Suppose we have N
x
atoms
in the x-direction, so that the length of the solid is L = N
x
a. Suppose also that we have N
y
and N
z
atoms in the y- and z-directions respectively, so that the cross-sectional area A = N
y
N
z
a
2
.
Now let us imagine applying a force (magnitude F) uniformly to all of the atoms on the left
and right ends that stretches all of these bonds by a small amount x, presumed to be small in
a
a
a
Figure 126: An idealized simple cubic lattice of atoms separated by the springs of interatomic
forces that hold them in equilibrium positions. The equilibrium separation of the atoms as a.
precisely the sense that leaves the interatomic bonds still behaving like springs. The force F has
to be distributed equally among all of the atoms on the end areas on both sides, so that the force
applied to each chain of atoms in the x-direction end to end is:
F
chain
=
F
N
y
N
z
=
Fa
2
A
(864)
This situation is portrayed in gure ??.
Each spring in the chain is stretched by this force between the atoms on the ends, so that:
F
chain
=
Fa
2
A
= k
e
x (865)
The negative sign just means that the springs are trying to go back to their equilibrium length and
hence oppose the applied force.
We multiply this by one in the form
N
x
N
x
:
Fa
2
A
= k
e
N
x
N
x
x (866)
We multiply this by one in the form
L=aN
x
L=aN
x
:
Fa
2
A
= k
e
a
N
x
x
N
x
a
= k
e
a
L
L
(867)
where we used the fact that L = N
x
x just as L = N
x
a.
Finally, we rearrange this by putting all of the extra terms together as follows:
F
A
=
k
e
a
L
L
= Y
L
L
(868)
In words, we dene F/A to be the Stress, L/L to be the Strain, and
Y = k
e
/a (869)
to be Youngs Modulus. With these denitions, the equation above states that:
x
a
L L
F F
A
Figure 127: The same lattice stretched by an amount L as a force F is applied to both ends,
spread out uniformly across the cross-sectional area of the faces A.
Compressive or extensive Stress applied to a solid equals Youngs Modulus
times the Strain.
Note well that we can rearrange this equation into Hookes Law as follows:
F
x
=
Y A
L
x = K x (870)
which basically states that any given chunk of material behaves like a spring when forces are applied
to stretch or compress it, with a spring constant K that is proportional to the cross sectional
area A and inversely proportional to the length L! Youngs modulus is the material-dependent
contribution from the actual geometry and interaction potential energy that holds the material
together, but the rest of the dependence is generic, and applies to all materials.
This scaling behavior of the response of solid (or liquid, or gaseous) matter to applied forces
is the important take-home conceptual lesson of this section. Substances like bone or steel or wood
or nearly anything are stronger respond less to an applied force as they get thicker, and are
weaker respond more to an applied force as they get longer. This intuitive understanding can
be made quantitatively precise to be sure (and for e.g. engineers or orthopedic surgeons will have
to be quantitatively precise as they craft buildings that wont fall down or articial hips or bones
that mimic natural ones) but is sucient in and of itself for people to see the world through new
eyes, to understand why there are building codes for houses and decks governing the lengths and
cross-sectional areas of support beams and joists and so on. Well explore a few of these applications
later, but rst let us relatively quickly extend the linear extension/compression result to sideways
forces and understand shear.
9.5.4: Shear Forces and the Shear Modulus
If we imagine taking our chunk of model solid pictured in gure 126 above and pushing sideways on
the top to the right while the bottom is locked to a table by e.g. static friction on the bottom, we are
applying a shear force one that bends the material sideways instead of stretching or compressing it.
The layers of the material all shift sideways by an amount that distributes the shear force between
all of the layers as shown and the material deforms at an angle as shown.
A fully microscopic derivation of the response is still quite possible, but not quite as simple as
that for Youngs modulus above. For that reason we will content ourselves with a simple heuristic
extension of the scaling ideas we learned in the previous section.
The displacement layer to layer required to oppose a given shear force is going to be inversely
proportional to the thickness of the material L, because the longer the material is, the more layers
there are to split the restoring force among. So we expect F
s
to be proportional to 1/L. The work
we do as the material bends comes primarily from the stretching of the vertical bonds. The number
of vertical bonds is proportional to the cross-sectional area A of the material at the shear surface
on the top and bottom. More bonds, a stronger force for a given displacement. We expect F
s
to
be proportional to A. As before, we expect the response to depend on the microscopic properties
of the material and its structure in some way we wrap all our ignorance of these properties into
a modulus that we can more easily measure in the lab than compute from rst principles. We then
assemble these scaling results into:
F
s
=
M
s
A
L
x (871)
where M
s
is the shear modulus the equivalent of Youngs modulus for shear forces. Once again
we can put this in a form involving shear stress F
s
/A and shear strain x/L:
F
s
A
= M
s
x
L
(872)
In words:
Shear Stress applied to a solid equals the Shear Modulus times the Strain.
where note well the minus sign that as always means that the reaction force opposes the applied
shear force, trying to make x smaller in magnitude no matter what direction the material is being
bent.
Shear stress is how springs really work! A spring is just a very long piece of material wrapped
around into a coil so that when the ends are pulled, it produces shear stress spread out across the
entire coil! So it is not an accident that we discover Hookes Law buried within this result this is
a (slighly handwaving) microscopic derivation of Hookes Law:
F
x
=
M
s
A
L
x = k x (873)
where:
k =
M
s
A
L
(874)
From this, we can predict how the strength of springs will vary according to the length of the wire
in the coil L and its thickness A. Pretty cool!
9.5.5: Deformation and Fracture
What happens when one stretches or compresses or shears a material by an amount (per bond) that
is not small? Here is a verbal description of what we might expect based on the microscopic model
above and our own experience.
For a range of (relatively small) stresses, the strain remains a linear response proportional
to the stress, acting in a direction opposed to the stress. As one increases the stress, then, the
rst thing that happens is that the response becomes non-linear. Each additional increment of
stress produces more than a linear increment of strain stretching, and quite possible less than a
linear increment compressing, as one can understand from the graph of a typical interatomic or
intermolecular force above. Materials tend to resist compression better than extension because one
can pull bonded atoms apart but one cannot cause two bonded atoms to interpenetrate with any
reasonable force they are very strongly repulsive when their electron clouds start to overlap but
only weakly attractive as the electron clouds are pulled apart.
At some point, one adds enough energy to the bonds (doing work as one e.g. stretches the
material) that atoms or molecules start to dislocate leave their normal place in the lattice or
structure and migrate someplace else. This leaves behind a defect a missing atom or molecule
in the structure and correspondingly weakens the entire structure. This migration tends to be
permanent even if one releases the stress on the material, it does not return to its original state but
remains stretched, compressed, or bent out of place. This region is one of permanent deformation
of the material, as when one bends a paper clip.
Finally, if one continues to ratchet up the stress, at some point the number of defects introduced
reaches a critical point and each new defect produced weakens the material enough that another
defect is produced without further increase in stress, as the number of bonds over which the stress
is distributed decreases with each new defect. The number of defects explodes, creating a fracture
plane and the material breaks.
|F/A|
| L/L |
A
B
C
linear response
nonlinear response
permanent deformation
fracture
Figure 128: The slope of the linear response part of the curve is Youngs Modulus (note well the
absolute magnitude signs). A marks the point where nonlinear response is rst apparent. B marks
the boundary where dislocations occur and permanent deformation of the material begins. C marks
the point where there is a chain reaction each defect produced produces on average at least one
more defect at the same stress, so that the material instantly fractures.
These behaviors and the critical points where the behavior changes are summarized on the
graph in gure 128.
Materials are not just characterized by their moduli. Moduli describe only the simple linear
response regime. Furthermore, the moduli themselves depend on how far the atoms or molecules
of the material are spending part of their time away from equilibrium without stress of any sort,
because the material has a temperature (basically, a mechanical energy per atom that is larger than
the minimum associated with sitting at the equilibrium point, at rest). In thermal equilibrium, each
atom is already oscillating back and forth around its equilibrium position and temperature increases
alone are sucient to drive the system through the same series of states linear and nonlinear
response where it can cool back to the original structure, nonlinear response that introduces defects
so that the material starts to melt and doesnt come back to its original state, followed by melting
instead of fracture when the energy per bond no longer keeps atoms localized to a lattice or structure
at all. When one mixes heating and stress, one can get many dierent ranges of physical behavior.
One last qualitative measure of interest is brittleness or toughness a measure of how likely a
material is to bend versus fracture when stresses are applied. Some materials, such as steel, are very
tough and not very brittle they do not easily deform or fracture. Others, like diamond, can be
very hard indeed but are easy to fracture they are brittle.
Human bone varies tremendously in the range of its brittleness with the lifetime of the human
involved, with genetic factors, with dietary factors, and with the history of the person involved.
Young people (on average) have bones that bend easily but arent very brittle. Old people have
bones that become progressively more brittle as they decalcify with age or disease. Normal adults
tend to fall in between bones that are not as exible but that are also not particularly brittle.
In all cases thick bones are stronger than thin ones, long bones are weaker than short bones, all
things being equal (which often is not the case). Still, this section should give you a good chance
of understanding at least semi-quantitatively how bone strength varies and can be described with
a few empirical parameters that can be connected (with a fair bit of work) all the way back to the
intermolecular bonds within the bone itself and its physical structure.
9.6: Human Bone
Figure 129: This gure illustrates the principle anatomical features of bone.
The bone itself is a composite material made up of a mix of living and dead cells embedded in
a mineralized organic matrix. It has signicant tensor structure looking somewhat like a random
honeycomb structure in cross section but with a laminated microstructure along the length of the
bone. Its anatomy is illustrated in gure 129.
Bone is layered from the outside in. The very outer hard layer of a bone is called is perios-
teum
193
. In between is compact bone, or osteon that gives bone much of its strength. Nutrients
ow into living bone tissue through holes in the bone called foramen, and are distributed up and
193
Latin for outer bone. But it sounds much cooler in Latin, doesnt it?
down through the osteon through haversian canals (not shown) that are basically tubes through
the bone for blood vessels that run along the bones length to perfuse it. The periosteum and osteon
make up roughly 80% of the mass of a typical long bone.
Inside the osteon is softer inner bone called endosteum
194
. The inner bone is made up of a mix
of dierent kinds of bone and other tissue that include spongy bone called trabeculae and bone
marrow (where blood cells are stored and formed). It has only 20% of the bones mass, but 90% of
the bones surface area. Much of the spongy bone material is lled with blood, to the point where a
good way to characterize the dierence between the osteon and the trabeculae is that in the former,
bone surrounds blood but in the latter, blood surrounds bone.
The bone matrix itself is made up of a mix of inorganic and organic parts. The inorganic part
is formed mostly of calcium hydroxylapatite (a kind of calcium phosphate that is quite rigid). The
organic part is collagen, a protein that gives bone its toughness and elasticity in much the same
way that tough steels are often a mix of soft iron and hard cementite particles, with the latter
contributing hardness and compressive/extensive strength, the latter reducing the brittleness that
often accompanies hardness and giving it a broader range of linear response elasticity.
There are two types of microscopically distinct bone. Woven bone has collagen bers mixed
haphazardly with the inorganic matrix, and is mechanically weak. Lamellar bone has a regular
parallel alignment of collagen bers into sheets (lamellae) that is mechanically strong. The latter
give the osteon a laminar/layered structure aligned with the bone axis. Woven bone is an early
developmental state of lamellar bone, seen in fetuses developing bones and in adults as the initial soft
bone that forms in a healing fracture. It serves as a sort of template for the replacement/formation
of lamellar bone.
Bones are typically connected together with surface layers of cartilage at the joints, augmented
by tough connective tissue and tendons smoothly integrated into muscles that permit mobile bones
to be articulated at the joints. Together, they make an impressive mechanical structure capable of
an extraordinary range of motions and activities while still supporting and protecting softer tissue
of our organs and circulatory system. Pretty cool!
Bone is quite strong. It fractures under compression at a stress of around 170 MPa in typical
human bones, but has a smaller fracture stress under tension at 120 MPa and is relatively Ieasy/i
to fracture with shear stresses of around 52 MPa. This is why it is easy (and common!) to break
bones with shear stresses, less common to break them from naked compression or tension typically
other parts of the skeletal structure tendons or cartilage in the joints fail before the actual bone
does in these situations.
Bone is basically brittle and easy to chip, but does have a signicant degree of compressive,
tensile, or shear elasticity (represented by e.g. Youngs modulus in the linear regime) contributed
primarily by collagen in the bone tissue. Younger humans still have relatively elastic bones; as one
ages ones bones become rst harder and tougher, and then (as repair mechanisms break down with
age) weaker and more brittle.
Figure 130 above shows the changes in bone associated with osteoporosis, the gradual thinning
of the bone matrix as the skeleton starts to decalcify. This process is associated with age, especially
in post-menopausal women, but it can also occur in association with e.g. corticosteroid therapy,
cancer, or other diseases or conditions such as Pagets disease in younger adults.
This process signicantly weakens the bones of those aicted to the point where the static shear
stresses associated with muscular articulation (for example, standing up) can break bones. A young
person might fall and break their hip where a person with really signicant osteoporosis can actually
break their hip (from the stress of standing) and then fall. This is not a medical textbook and
should not be treated as an authoritative guide to the practice of medicine (but rather, as a basis for
194
Latin for wait for it inner bone.
Figure 130: Illustration of the alteration of bone tissue accompanying osteoporosis.
understanding what one might by trying to learn in a directed study of medicine), but with that said,
osteoporosis can be treated to some extent by things like hormone replacement therapy in women (it
seems to go with the reduction of estrogen that occurs in menopause), calcium supplementation to
help slow the loss of calcium, and certain drugs such as Fosamax (Alendronate) that reduce calcium
loss and increase bone density (but that have risks and side eects).
Example 9.6.1: Scaling of Bones with Animal Size
An interesting biological example of scaling laws in physics and the reason I emphasize the de-
pendence of many physically or physiologically interesting quantities on length and/or area can
be seen in the scaling of animal bones with the size of the animal
195
. Let us consider this.
We have seen above that the scaling of the spring constant of a given material that governs its
change in length or its transverse displacement under compression, tension, or shear is:
k
e
=
XA
L
(875)
where X is the relevant (compression, tension, shear) modulus. Bone strength, including the point
where the bone fractures under stresses of these sorts, might very reasonably be expected to be
proportional to this constant and to scale similarly.
The leg bones of a four-legged animal have to be able to support the weight of that animal under
compressive stress. This enables us to make the following scaling argument:
In general, the weight of any animal is roughly proportional to its volume. Most animals are
mostly made of water, and have a density close to that of water, so the volume of the animal
times the density of water is a decent approximate guess of what its weight should be.
In general, the volume of an animal (and hence its weight) is proportional to any characteristic
length scale that describes the animal cubed. Obviously this wont work well if one compares
195
Wikipedia: http://www.wikipedia.org/wiki/On Being the Right Size. This and many other related arguments
were collected by J. B. S. Haldane in an article titled On Being the Right Size, published in 1926. Collectively they
are referred to as the Haldane Principle. However, the original idea (and 3/2 scaling law discussed below) is due to
none other than Galileo Galilei!
a snake, with one very long length and two very short lengths, to a comparatively round
hippopotamus, but it wont be crazy comparing mice to dogs to horses to elephants that all
have reasonably similar body proportions. Well choose the animal height.
The leg bones of the animal have a strength proportional to the cross-sectional area.
We would like to be able to estimate the thickness of an animals bone its known height and
from a knowledge of the thickness of one kind of a reference animals bone and its height.
Our argument then is: The volume, and hence the weight, of an animal increases like the cube of
its characteristic length (e.g. its height H). The strength of its bones that must support this weight
goes like the square of the diameter D of those bones. Therefore:
H
3
= CD
2
(876)
where C is some constant of proportionality. Solving for D(H) we get:
D =
1
C
H
3/2
(877)
This simple equation is approximately satised, although not exactly as given because our model
for bones breaking does not reect shear-driven buckling and a related need for muscle to scale,
for mammals ranging from small rodents through the mighty elephant. Bone thickness does indeed
increase nonlinearly with respect to body size.
Homework for Week 9
Problem 1.
Problem 2.
Harmonic oscillation is conceptually very important because (as has been remarked in class) many
things that are stable will oscillate more or less harmonically if perturbed a small distance away
from their stable equilibrium point. Draw an energy diagram, a graph of a generic interaction
potential energy with a stable equilibrium point and explain in words and equations where, and
why, this should be.
Problem 3.
m
L
g
moon
= g
earth
/6
Moon
A pendulum with a string of length L supporting a mass m on the earth has a certain period
T. A physicist on the moon, where the acceleration near the surface is around g/6, wants to make
a pendulum with the same period. What mass m
m
and length L
m
of string could be used to
accomplish this?
Problem 4.
m
m
m
k
k
1
k
2
k
1
k
2
eff
In the gure above identical masses m are attached to two springs k
1
and k
2
in series one
connected to the other end-to-end and in parallel the two springs side by side. In the third
picture another identical mass m is shown attached to a single spring with constant k
e
.
a) What should k
e
be in terms of k
1
and k
2
for the series combination of springs so that the
force on the mass is the same for any given displacement x from equilibrium?
b) What should k
e
be in terms of k
1
and k
2
for the parallel combination of springs so that the
force on the mass is the same for any given displacement x from equilibrium?
Note that this problem illustrates the scaling of Youngs modulus with length (series) or area
(parallel). It also gives you a head start on how series and parallel addition of resistors and capacitors
works next semester! Its therefore well worth puzzling over.
Problem 5.
P
left P
right
P
left
P
left
P
left
P
right
P
right
P
right
c
I
v
I
v
I
v
I
v
a
b
d
L
r
In this class we usually idealize uid ow by neglecting resistance (drag) and the viscosity of the
uid as it passes through cylindrical pipes so we can use the Bernoulli equation. As discussed in
class, however, it is often necessary to have at sound conceptual understanding of at least the qual-
itative eects of including the resistance and viscosity. Use Poiseuilles Law and the concepts
of resistance, pressure, and ow from the online textbook to answer and discuss the follow-
ing simple questions. Make sure your conceptual understanding of these concepts is qualitatively
sound!
a) Is P
a
= P
left
P
right
greater than, less than, or equal to zero in gure a) above, where blood
ows at a rate I
v
horizontally through a blood vessel with constant radius r and some length
L against the resistance of that vessel?
b) If the radius r increases (while ow I
v
and length L remain the same as in a), does the
pressure dierence P
b
increase, decrease, or remain the same compared to P
a
?
c) If the length increases (while ow I
v
and radius r remains the same as in a), does the pressure
dierence P
c
a
?
d) If the viscosity of the blood increases (where ow I
v
, radius r, and length L are all unchanged
compared to a) do you expect the pressure dierence P
d
dierence across a blood vessel to
a
?
Blood viscosity is chemically related to things like the stickiness of platelets and their abundance
in the blood. Viscosity and the radius r of blood vessels can be regulated or altered (within limits)
by drugs, disease, diet and exercise all of which have a completely understandable eect upon
blood pressure based on the simple ideas above.
Problem 6.
A
2H/3
H
water
Static equilibrium
Archimedes Principle
Simple Harmonic Oscillation
rgb is shing in still water o of the old dock. He is using a cylindrical bobber as shown. The
bobber has a cross sectional area of A and a length of H, and is balanced so that it remains vertical
in the water. When it is oating at equilibrium (supporting the weight of the hook and worm
dangling underneath) 2H/3 of its length is submerged in the water. You can neglect the volume
of the line, hook and worm (that is, their buoyancy is negligible), and neglect all drag/damping
forces. Answer the following questions in terms of A, H,
w
(the density of water), g:
a) What is the combined mass M of the bobber, hook and worm from the data?
b) A sh gives a tug on the worm and pulls the bobber straight down an additional distance
(from equilibrium) y. What is the net restoring force on the bobber as a function of y?
c) Use this force and the calculated mass M from a) to write Newtons 2nd Law for the motion
of the bobber up and down (in y) and turn it into an equation of motion in standard form for
a harmonic oscillator.
d) Assume that the bobber is pulled down the specic distance y = H/3 and released from
rest at time t = 0. Neglecting the damping eects of the water, write an equation for the
displacement of the bobber from its equilibrium depth as a function of time, y(t) (the solution
to the equation of motion).
e) With what frequency does the bobber bob? Evaluate your answer for H = 10 cm, A = 1 cm
2
(reasonable values for a shing bobber).
Problem 7.
L
M
max
Torque
Newtons Second Law for Rotation
Moments of Inertia
Small Angle Approximation
A grandfather clock is constructed with a pendulum that consists of a long, light (assume mass-
less) rod and a small, heavy (assume point-like) mass M that can be slid up and down the rod
changing L to tune the clock. The clock keeps perfect time when the period of oscillation of the
pendulum is T = 2 seconds. When the clock is running, the maximum angle the rod makes with
the vertical is
max
= 0.05 radians (a small angle).
a) Derive the equation of motion for the rod when it freely swings and solve for (t) assuming it
starts at
max
at t = 0. You may use either force or torque.
b) At what distance L from the pivot should the mass be set so that the clock keeps correct time?
As always, solve the problem algebraically rst and only then worry about numbers.
c) In your answer above, you idealized by assuming the rod to be massless and the ball to be
pointlike. In the real world, of course, the rod has a small mass m and the ball is a ball of
radius r, not a point mass. Will the clock run slow or fast if you set the mass exactly where
you computed it in part b)? Should you reduce L or increase L a bit to compensate and get
better time? Explain.
Problem 8.
h
d
d
pivot
k k
M
Springs (Hookes Law)
Small Angle Approximation
The pole in the gure has mass M and length h is supported by two identical springs with spring
constant k that connect its platform to a table as shown. The springs attach to the platform a
distance d from the base of the pole, which is pivoted on a frictionless hinge so it can rotate only in
the plane of the page as shown. Gravity acts down. Neglect the mass of the platform.
a) On a copy of the right-hand gure, indicate the forces acting on the pole and platform when
the pole tips over as shown, deviating from the vertical by a (small) angle .
b) Using your answer to a), nd the total torque acting on the system (pole and platform) about
the hinged bottom of the pole, and note its direction. Use the small angle approximations
sin() ; cos() 1.
c) Find the minimal value for the spring constant k of the two springs such that the pole is
stable in the vertical position. This means that a small deviation as above produces a torque
that restores the pole to the vertical.
d) For M = 50 kg, h = 1.0 meter, d = 0.5 meter, and springs with spring constant k = 9600
N/m, nd the angular frequency with which the pole oscillates about the vertical.
Advanced Problem 9.
P
A
a
y
0
P
0
Bernoullis Equation
Torricellis Law
In the gure above, a large drum of water is open at the top and lled up to a height y above a
tap at the bottom (which is also open to normal air pressure). The drum has a cross-sectional area
A at the top and the tap has a cross sectional area of a at the bottom.
The questions below help you use calculus to determine how long it will take for the drum
to empty. The rst two questions and the last question anybody can answer. The one where you
actually have to integrate may be dicult for non-math/physics/engineering students, but feel free
to give it a try!
a) Find the speed with which the water emerges from the tap. Assume laminar ow without
resistance. Compare your answer to the speed a mass has after falling a height y in a uniform
gravitational eld (after using A a to simplify your nal answer, Torricellis Law).
b) Start by guessing how long it will take water to ow out of the tank by using dimensional
analysis and the insight gained from a). That is, think about how you expect the time to vary
with each quantity that describes the problem and form a simple expression with the relevant
parameters that has the right units and goes up where it should go up and down where it
should go down.
c) Next, nd an algebraic expression for the velocity of the top. This is dy/dt.
d) Manupulate the expression and integrate dy on one side, an expression with dt on the other
side, to nd the time it takes for the top of the water to reach the bottom of the tank. Compare
your answer to b) to your answer to d) and the time it takes a mass to fall a height y in a
uniform gravitational eld. Does the correct answer make dimensional and physical sense?
You might want to think a bit about Toricellis Law here as well...
e) Evaluate the answers to a) and d) for A = 0.50 m
2
, a = 0.5 cm
2
, y(0) = 100 cm.
Optional Problems
Continue studying for the nal exam! Only three weeks (chapters) to go in this
textbook, nals are coming apace!
428 Week 10: The Wave Equation
Week 10: The Wave Equation
Wave Summary
Wave Equation
d
2
y
dt
2
v
2
d
2
y
dx
2
= 0 (878)
where for waves on a string:
v =
(879)
Superposition Principle
y(x, t) = Ay
1
(x, t) +By
2
(x, t) (880)
(sum of solutions is solution). Leads to interference, standing waves.
Travelling Wave Pulse
y(x, t) = f(x vt) (881)
where f(u) is an arbitrary functional shape or pulse
Harmonic Travelling Waves
y(x, t) = y
0
sin(kx t). (882)
where frequency f, wavelength , wave number k = 2/ and angular frequency are related
to v by:
v = f =

k
(883)
Stationary Harmonic Waves
y(x, t) = y
0
cos(kx +) cos(t +) (884)
where one can select k and so that waves on a string of length L satisfy xed or free boundary
conditions.
Energy (of wave on string)
E
tot
=
1
2
2
A
2
(885)
is the total energy in a wavelength of a travelling harmonic wave. The wave transports the
power
P =
E
T
=
1
2
2
A
2
f =
1
2
2
A
2
v (886)
past any point on the string.
Reection/Transmission of Waves
429
a) Light string (medium) to heavy string (medium): Transmitted pulse right side up, re-
ected pulse inverted. (A xed string boundary is the limit of attaching to an innitely
heavy string).
b) Heavy string to light string: Transmitted pulse right side up, reected pulse right side
up. (a free string boundary is the limit of attaching to a massless string).
10.1: Waves
We have seen how a particle on a spring that creates a restoring force proportional to its displacement
from an equilibrium position oscillates harmonically in time about that equilibrium. What happens
if there are many particles, all connected by tiny springs to one another in an extended way?
This is a good metaphor for many, many physical systems. Particles in a solid, a liquid, or a gas
both attract and repel one another with forces that maintain an average particle spacing. Extended
objects under tension or pressure such as strings have components that can exert forces on one
another. Even elds (as we shall learn next semester) can interact so that changes in one tiny
element of space create changes in a neighboring element of space.
What we observe in all of these cases is that changes in any part of the medium propagate to
other parts of the medium in a very systematic way. The motion observed in this propagation is
called a wave. We have all observed waves in our daily lives in many contexts. We have watched
water waves propagate away from boats and raindrops. We listen to sound waves (music) generated
by waves created on stretched strings or from tubes driven by air and transmitted invisibly through
space by means of radio waves. We read these words by means of light, an electromagnetic wave. In
advanced physics classes one learns that all matter is a sort of quantum wave, that indeed everything
is really a manifestation of waves.
It therefore seems sensible to make a rst pass at understanding waves and how they work in
general, so that we can learn and understand more in future classes that go into detail.
The concept of a wave is simple it is an extended structure that oscillates in both space and in
time. We will study two kinds of waves at this point in the course:
Transverse Waves (e.g. waves on a string). The displacement of particles in a transverse
wave is perpendicular to the direction of the wave itself.
Longitudinal Waves (e.g. sound waves). The displacement of particles in a longitudinal
wave is in the same direction that the wave propagates in.
Some waves, for example water waves, are simultaneously longitudinal and transverse. Transverse
waves are probably the most important waves to understand for the future; light is a transverse wave.
We will therefore start by studying transverse waves in a simple context: waves on a stretched string.
y
x
v
Figure 131: A uniform string is plucked or shaken so as to produce a wave pulse that travels at a
speed v to the right. The circled region is examined in more detail in the next gure.
10.2: Waves on a String
Suppose we have a uniform stretchable string (such as a guitar string) that is pulled at the ends so
that it is under tension T. The string is characterized by its mass per unit length thick guitar
strings have more mass per unit length than thin ones but little else. It is fairly harmless at this point
to imagine that the string is xed to pegs at the ends that maintain the tension. Our experience of
such things leads us to expect that the stretched string will form an almost perfectly straight line
unless we pluck it or otherwise bend some other shape upon it. We will impose coordinates upon
this string such that x runs along its (undisplaced) equilibrium position and y describes the vertical
displacement of any given bit of the string.
Now imagine that we have plucked the string somewhere between the end points so that it is
displaced in the y-direction from its equilibrium (straight) stretched position and has some curved
shape, as portrayed in gure 131. The tension T, recall, acts all along the string, but because the
string is curved the force exerted on any small bit of string does not balance. This inspires us to try
to write Newtons Second Law not for the entire string itself, but for just a tiny bit of string, indeed
a dierential bit of string.
We thus zoom in on just a small chunk of the string in the region where we have stretched or
shaken a wave pulse as illustrated by the gure above. If we blow this small segment up, perhaps
we can nd a way to write the unbalanced forces out in a way we can deal with algebraically.
This is shown in gure 132, where Ive indicated a short segment/chunk of the string of length
x by cross-hatching it. We would like to write Newtons 2nd law for that chunk. As you can see,
the same magnitude of tension T pulls on both ends of the chunk, but the tension pulls in slightly
dierent directions, tangent to the string at the end points.
If is small, the components of the tension in the x-direction:
F
1x
= T cos(
1
) T
F
2x
= T cos(
1
) T (887)
are nearly equal and in opposite directions and hence nearly perfectly cancel (where we have used
the small angle approximation to the Taylor series for cosine:
cos() = 1

2
2!
+

4
4!
... 1 (888)
for small 1).
Each bit of string therefore moves more or less straight up and down, and a useful solution is
described by y(x, t), the y displacement of the string at position x and time t. The permitted
solutions must be continuous if the string does not break. It is worth noting that not all waves
involving moving up and down only this initial example is called a transverse wave, but other
kinds of waves exist. Sound waves, for example, are longitudinal compression waves, with the
motion back and forth along the direction of motion and not at right angles to it. Surface waves
on water are a mixture, they involve the water both moving up and down and back and forth. But
for the moment well stick with these very simple transverse waves on a string because they already
exhibit most of the properties of far more general waves you might learn more about later on.
x
y
1
2
x
T
T
Figure 132: The forces exerted on a small chunk of the string by the tension T in the string. Note
that we neglect gravity in this treatment, assuming that it is much too small to bend the stretched
string signicantly (as is indeed the case, for a taut guitar string).
In the y-direction, we nd write the force law by considering the total y-components of the sum
of the force exerted by the tension on the ends of the chunk:
F
y,tot
= F
1y
+F
2y
= T sin(
1
) +T sin(
2
) = ma
y
= xa
y
(889)
We make the small angle approximation: sin() tan() :
T tan(
2
) T tan(
1
) = T(tan(
2
) tan(
1
)) = xa
y
, (890)
note that tan() =
dy
dx
(the slope of the string is the tangent of the angle the string makes with the
horizon) and divide out the x to isolate a
y
= d
2
y/dt
2
. We end up with:
d
2
y
dt
2
=
T
(
dy
dx
)
x
(891)
In the limit that x 0, this becomes:
d
2
y
dt
2

T
d
2
y
dx
2
= 0 (892)
The quantity
T
has to have units of

L
2
t
2
which is a velocity squared.
We therefore formulate this as the one dimensional wave equation:
d
2
y
dt
2
v
2
d
2
y
dx
2
= 0 (893)
where
v =
(894)
are the velocity(s) of the wave on the string. This is a second order linear homogeneous dierential
equation and has (as one might imagine) well known and well understood solutions.
Note well: At the tension in the string increases, so does the wave velocity. As the mass density
of the string increases, the wave velocity decreases. This makes physical sense. As tension goes up
the restoring force is greater. As mass density goes up one accelerates less for a given tension.
10.3: Solutions to the Wave Equation
In one dimension there are at least three distinct solutions to the wave equation that we are interested
in. Two of these solutions propagate along the string energy is transported from one place to another
by the wave. The third is a stationary solution, in the sense that the wave doesnt propagate in one
direction or the other (not in the sense that the string doesnt move). But rst:
10.3.1: An Important Property of Waves: Superposition
The wave equation is linear, and hence it is easy to show that if y
1
(x, t) solves the wave equation
and y
2
(x, t) (independent of y
1
) also solves the wave equation, then:
y(x, t) = Ay
1
(x, t) +By
2
(x, t) (895)
solves the wave equation for arbitrary (complex) A and B.
This property of waves is most powerful and sublime.
10.3.2: Arbitrary Waveforms Propagating to the Left or Right
The rst solution we can discern by noting that the wave equation equates a second derivative in
time to a second derivative in space. Suppose we write the solution as f(u) where u is an unknown
function of x and t and substitute it into the dierential equation and use the chain rule:
d
2
f
du
2
(
du
dt
)
2
v
2
d
2
f
du
2
(
du
dx
)
2
= 0 (896)
or
d
2
f
du
2
_
(
du
dt
)
2
v
2
(
du
dx
)
2
_
= 0 (897)
du
dt
= v
du
dx
(898)
with a simple solution:
u = x vt (899)
What this tells us is that any function
y(x, t) = f(x vt) (900)
satises the wave equation. Any shape of wave created on the string and propagating to the right
or left is a solution to the wave equation, although not all of these waves will vanish at the ends of
a string.
10.3.3: Harmonic Waveforms Propagating to the Left or Right
An interesting special case of this solution is the case of harmonic waves propagating to the left
or right. Harmonic waves are simply waves that oscillate with a given harmonic frequency. For
example:
y(x, t) = y
0
sin(x vt) (901)
is one such wave. y
0
is called the amplitude of the harmonic wave. But what sorts of parameters
describe the wave itself? Are there more than one harmonic waves?
This particular wave looks like a sinusoidal wave propagating to the right (positive x direction).
But this is not a very convenient parameterization. To better describe a general harmonic wave, we
need to introduce the following quantities:
The frequency f. This is the number of cycles per second that pass a point or that a point
on the string moves up and down.
The wavelength . This the distance one has to travel down the string to return to the same
point in the wave cycle at any given instant in time.
To convert x (a distance) into an angle in radians, we need to multiply it by 2 radians per
wavelength. We therefore dene the wave number:
k =
2
(902)
and write our harmonic solution as:
y(x, t) = y
0
sin(k(x vt)) (903)
= y
0
sin(kx kvt) (904)
= y
0
sin(kx t) (905)
where we have used the following train of algebra in the last step:
kv =
2
v = 2f =
2
T
= (906)
and where we see that we have two ways to write v:
v = f =

k
(907)
As before, you should simply know every relation in this set of algebraic relations between
, k, f, , v to save time on tests and quizzes. Of course there is also the harmonic wave travelling
to the left as well:
y(x, t) = y
0
sin(kx +t). (908)
A nal observation about these harmonic waves is that because arbitrary functions can be ex-
panded in terms of harmonic functions (e.g. Fourier Series, Fourier Transforms) and because the
wave equation is linear and its solutions are superposable, the two solution forms above are not really
distinct. One can expand the arbitrary f(xvt) in a sum of sin(kxt)s for special frequencies
and wavelengths. In one dimension this doesnt give you much, but in two or more dimensions this
process helps one compute the dispersion of the wave caused by the wave spreading out in multiple
dimensions and reducing its amplitude.
10.3.4: Stationary Waves
The third special case of solutions to the wave equation is that of standing waves. They are especially
apropos to waves on a string xed at one or both ends. There are two ways to nd these solutions
from the solutions above. A harmonic wave travelling to the right and hitting the end of the string
(which is xed), it has no choice but to reect. This is because the energy in the string cannot just
disappear, and if the end point is xed no work can be done by it on the peg to which it is attached.
The reected wave has to have the same amplitude and frequency as the incoming wave. What does
the sum of the incoming and reected wave look like in this special case?
Suppose one adds two harmonic waves with equal amplitudes, the same wavelengths and fre-
quencies, but that are travelling in opposite directions:
y(x, t) = y
0
(sin(kx t) + sin(kx +t)) (909)
= 2y
0
sin(kx) cos(t) (910)
= Asin(kx) cos(t) (911)
(where we give the standing wave the arbitrary amplitude A). Since all the solutions above are
independent of the phase, a second useful way to write stationary waves is:
y(x, t) = Acos(kx) cos(t) (912)
Which of these one uses depends on the details of the boundary conditions on the string.
In this solution a sinusoidal form oscillates harmonically up and down, but the solution has some
very important new properties. For one, it is always zero when x = 0 for all possible lambda:
y(0, t) = 0 (913)
For a given there are certain other x positions where the wave vanishes at all times. These positions
are called nodes of the wave. We see that there are nodes for any L such that:
y(L, t) = Asin(kL) cos(t) = 0 (914)
which implies that:
kL =
2L
= , 2, 3, . . . (915)
or
=
2L
n
(916)
for n = 1, 2, 3, ...
Only waves with these wavelengths and their associated frequencies can persist on a string of
length L xed at both ends so that
y(0, t) = y(L, t) = 0 (917)
(such as a guitar string or harp string). Superpositions of these waves are what give guitar strings
their particular tone.
It is also possible to stretch a string so that it is xed at one end but so that the other end is
free to move to slide up and down without friction on a greased rod, for example. In this case,
instead of having a node at the free end (where the wave itself vanishes), it is pretty easy to see
that the slope of the wave at the end has to vanish. This is because if the slope were not zero, the
terminating rod would be pulling up or down on the string, contradicting our requirement that the
rod be frictionless and not able to pull the string up or down, only directly to the left or right due
to tension.
The slope of a sine wave is zero only when the sine wave itself is a maximum or minimum, so that
the wave on a string free at an end must have an antinode (maximum magnitude of its amplitude)
at the free end. Using the same standing wave form we derived above, we see that:
kL =
2L
= /2, 3/2, 5/2 . . . (918)

for a string xed at x = 0 and free at x = L, or:
=
4L
2n 1
(919)
for n = 1, 2, 3, ...
There is a second way to obtain the standing wave solutions that particularly exhibits the re-
lationship between waves and harmonic oscillators. One assumes that the solution y(x, t) can be
written as the product of a fuction in x alone and a second function in t alone:
y(x, t) = X(x)T(t) (920)
If we substitute this into the dierential equation and divide by y(x, t) we get:
d
2
y
dt
2
= X(x)
d
2
T
dt
2
= v
2
d
2
y
dx
2
= v
2
T(t)
d
2
X
dx
2
(921)
1
T(t)
d
2
T
dt
2
= v
2
1
X(x)
d
2
X
dx
2
(922)
=
2
(923)
where the last line follows because the second line equations a function of t (only) to a function of
x (only) so that both terms must equal a constant. This is then the two equations:
d
2
T
dt
2
+
2
T = 0 (924)
and
d
2
X
dt
2
+k
2
X = 0 (925)
(where we use k = /v).
From this we see that:
T(t) = T
0
cos(t +) (926)
and
X(x) = X
0
cos(kx +) (927)
so that the most general stationary solution can be written:
y(x, t) = y
0
cos(kx +) cos(t +) (928)
10.4: Reection of Waves
We argued above that waves have to reect of of the ends of stretched strings because of energy
conservation. This is true independent of whether the end is xed or free in neither case can the
string do work on the wall or rod to which it is axed. However, the behavior of the reected wave
is dierent in the two cases.
Suppose a wave pulse is incident on the xed end of a string. One way to discover a wave
solution that apparently conserves energy is to imagine that the string continues through the barrier.
At the same time the pulse hits the barrier, an identical pulse hits the barrier from the other,
imaginary side.
Since the two pulses are identical, energy will clearly be conserved. The one going from left to
right will transmit its energy onto the imaginary string beyond at the same rate energy appears
going from right to left from the imaginary string.
However, we still have two choices to consider. The wave from the imaginary string could be
right side up the same as the incident wave or upside down. Energy is conserved either way!
If the right side up wave (left to right) encounters an upside down wave (right to left) they
will always be opposite at the barrier, and when superposed they will cancel at the barrier. This
corresponds to a xed string. On the other hand, if a right side up wave encounters a right side up
wave, they will add at the barrier with opposite slope. There will be a maximum at the barrier with
zero slope just what is needed for a free string.
From this we deduce the general rule that wave pulses invert when reected from a xed boundary
(string xed at one end) and reect right side up from a free boundary.
When two strings of dierent weight (mass density) are connected, wave pulses on one string are
both transmitted onto the other and are generally partially reected from the boundary. Computing
the transmitted and reected waves is straightforward but beyond the scope of this class (it starts to
involve real math and studies of boundary conditions). However, the following qualitative properties
of the transmitted and reected waves should be learned:
Light string (medium) to heavy string (medium): Transmitted pulse right side up, reected
pulse inverted. (A xed string boundary is the limit of attaching to an innitely heavy
string).
Heavy string to light string: Transmitted pulse right side up, reected pulse right side up. (a
free string boundary is the limit of attaching to a massless string).
10.5: Energy
Clearly a wave can carry energy from one place to another. A cable we are coiling is hung up on
a piece of wood. We ip a pulse onto the wire, it runs down to the piece of wood and knocks the
wire free. Our lungs and larnyx create sound waves, and those waves trigger neurons in ears far
away. The sun releases nuclear energy, and a few minutes later that energy, propagated to earth
as a light wave, creates sugar energy stored inside a plant that is still later released while we play
basketball
196
. Since moving energy around seems to be important, perhaps we should gure out
how a wave manages it.
Let us restrict our attention to a harmonic wave of known angular frequency . Our results
will still be quite general, because arbitrary wave pulses can be fourier decomposed as noted above.
Consider a small piece of the string of length dx and mass dm = dx. This piece of string, displaced
to its position y(x, t), will have potential energy:
dU =
1
2
dm
2
y
2
(x, t) (929)
=
1
2
dx
2
y
2
(x, t) (930)
=
1
2
A
2
2
sin
2
(kx t)dx (931)
We can easily integrate this over any specic interval. Let us pick a particular time t = 0 and
integrate it over a single wavelength:
U =
_

0
1
2
A
2
2
sin
2
(kx)dx (932)
=
1
2k
A
2
2
_

0
sin
2
(kx)kdx (933)
=
1
2k
A
2
2
_
2
0
sin
2
()d (934)
=
1
4
A
2
2
(935)
(where we have used the easily proven relation:
_
2
0
sin
2
()d = (936)
to do the nal form of the integral.)
196
Painfully and badly, in my case. As Im typing this, my ribs and ankles hurt from participating in the Great
Beaufort 3 on 3 Physics Basketball Tournament, Summer Session 1, 2011! But what the heck, we won and are in the
nals. And it was energy propagated by a wave, stored (in my case) as fat, that helped get us there...
Now we need to compute the kinetic energy in a wavelength at the same instant.
dK =
1
2
dm
_
dy
dt
_
2
(937)
=
1
2
A
2
2
cos
2
(kx t)dx (938)
which has exactly the same integral:
K =
1
4
A
2
2
(939)
so that the total energy in a wavelength of the wave is:
E
tot
=
1
2
2
A
2
(940)
Study the dependences in this relation. Energy depends on the amplitude squared! (Emphasis
to convince you to remember this! It is important!) It depends on the mass per unit length times
the length (the mass of the segment). It depends on the frequency squared.
This energy moves as the wave propagates down the string. If you are sitting at some point on
the string, all the energy in one wavelength passes you in one period of oscillation. This lets us
compute the power carried by the string the energy per unit time that passes us going from left
to right:
P =
E
T
=
1
2
2
A
2
f =
1
2
2
A
2
v (941)
We can think of this as being the energy per unit length (the total energy per wavelength divided by
the wavelength) times the velocity of the wave. This is a very good way to think of it as we prepare
to study light waves, where a very similar relation will hold.
Homework for Week 10
Problem 1.
Problem 2.
This (and several of the following) problems are from resonance and damped and/or driven
oscillation, not from waves! Be sure to use the correct concepts on your concept summary!
Roman soldiers (like soldiers the world over even today) marched in step at a constant frequency
except when crossing wooden bridges, when they broke their march and walked over with random
pacing. Why? What might have happened (and originally did sometimes happen) if they marched
across with a collective periodic step?
Problem 3.
1
2
3
4
5
6
7
8
9
10
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
P
(
(a)
(b)
(c)
In the gure above, three resonance curves are drawn showing the power delivered to a steady-
state driven oscillator, P(). In all three cases the resonance frequency
0
is the same. Put down
an estimate of the Q-value of each oscillator by looking at the graph. It may help for you to put
down the denition of Q most relevant to the process of estimation on the page.
a)
b)
c)
Problem 4.
k
b
m
A mass m is attached to a spring with spring constant k and immersed in a medium with damping
coecient b. (Gravity, if present at all, is irrelevant as shown in class). The net force on the mass
when displaced by x from equilibrium and moving with velocity v
x
is thus:
F
x
= ma
x
= kx bv
x
(in one dimension).
a) Convert this equation (Newtons second law for the mass/spring/damping uid arrangement)
into the equation of motion for the system, a second order linear homogeneous dierential
equation as done in class.
b) Optionally solve this equation, nding in particular the exponential damping rate of the solu-
tion (the real part of the exponential time constant) and the shifted frequency
, assuming
that the motion is underdamped. You can put down any form you like for the answer; the
easiest is probably a sum of exponential forms. However, you may also simply put down the
solution derived in class if you plan to just memorize this solution instead of learn to derive
and understand it.
c) Using your answer for
from part b), write down the criteria for damped, underdamped, and
critically damped oscillation.
d) Draw three qualitatively correct graphs of x(t) if the oscillator is pulled to a position x
0
and
released at rest at time t = 0, one for each damping. Note that you should be able to do this
part even if you cannot derive the curves that you draw or
. Clearly label each curve.

Problem 5.
m
4m
9m
a b c
Three strings of length L (not shown) with the same mass per unit length are suspended
vertically and blocks of mass m, 4m and 9m are hung from them. The total mass of each string
L m (the strings are much lighter than the masses hanging from them). If the speed of a wave
pulse on the rst string is v
0
, ll in the following table with entries for b) and c):
a) v
0
b)
c)
Problem 6.
4T 4T
a
b
c
d
2
3
4
In the gure above, the neck of a stringed instrument is schematized. Four strings of dierent
thickness (and hence dierent as shown) and the same length are stretched in such a way that the
tension in each is about the same (T) in each string. This produces a total of 4T between the end
bridges if this were not so, the neck of the guitar or ukelele or violin would tend to bow towards
the side with the greater tension.
If the speed of a wave pulse on the rst (lightest) string is v
0
, ll in the following table for the
speed of a wave pulse for the other three:
a) v
0
b)
c)
d)
Problem 7.
a
b
v
a
v
b
Two combinations of two strings with dierent mass densities are drawn above that are connected
in the middle. In both cases the string with the greatest mass density is drawn darker and thicker
than the lighter one, and the strings have the same tension T in both a and b. A wave pulse is
generated on the string pairs that is travelling from left to right as shown. The wave pulse will arrive
at the junction between the strings at time t
a
(for a) and t
b
(for b). Sketch reasonable estimates
for the transmitted and reected wave pulses onto (copies of) the a and b gures at time 2t
a
and 2t
b
respectively. Your sketch should correctly represent things like the relative speed of the
reected and transmitted wave and any changes you might reasonably expect for the amplitude
and appearance of the pulses.
Problem 8.
T,
y
x
0 L
A string of mass density is stretched to a tension T and is xed at both x = 0 and x = L.
The transverse string displacement is measured in the y direction. All answers should be given in
terms of these quantities or new quantities you dene in terms of these quantities.
a) Following the text, derive the wave equation (the equation of motion) for waves on a string
and identify the wave velocity squared in terms of T and . This one derivation suces for
this and the next problem.
b) Write down the equation y
n
(x, t) for a generic standing wave on this string with mode index
n, assuming that the string is maximally displaced at t = 0. Verify that it is a solution to the
ODE in a). Remember that the string is xed at both ends!
c) Find k
n
,
n
, f
n
,
n
for the rst three modes supported by the string. Sketch them in
on the axes below, labelling nodes and antinodes. Note that you should be able to draw the
modes and nd at least the wavelengths from the pictures alone.
y
x
0 L
y
x
0 L
y
x
0 L
Problem 9.
T,
y
x
0
L
A string of mass density is stretched to a tension T and is xed at x = 0 and free (fric-
tionless loop) at x = L. The transverse string displacement is measured in the y direction. All
answers should be given in terms of these quantities or new quantities you dene in terms of these
quantities.
a) Write down the equation y
n
(x, t) for a generic standing wave on this string with mode index
n, assuming that the string is maximally displaced at t = 0. Verify that it is a solution to the
ODE in a). Remember that the string is free at one end!
b) Find k
n
,
n
, f
n
,
n
for the rst three modes supported by the string. Sketch them in
on the axes below, labelling nodes and antinodes. Note that you should be able to draw the
modes and nd at least the wavelengths from the pictures alone.
y
x
0 L
y
x
0 L
y
x
0 L
Problem 10.
L
Speed of Wave on String
Static Equilibrium
Relationship betweeen Distance, Velocity, and Time
A string of total length L with a mass density is shown hanging from the ceiling above.
a) Find the tension T(y) in the string as a function of y, the distance up from its bottom end.
Note that the string is not massless, so each small bit of string must be in static equilibrium.
b) Find the velocity v(y) of a small wave pulse cast into the string at the bottom that is travelling
upward.
c) Find the amount of time it will take this pulse to reach the top of the string, reect, and return
to the bottom. Neglect the size (width in y) of the pulse relative to the length of the string.
Hint for last part. Set v = dy/dt, rearrange to get all the y-dependent parts on one side and dt and
some constants on the other side, then integrate both sides, the y part from 0 to L, the t part from
0 to t
0
. Solve for t
0
, double it. This is what calculus is for!
Problem 11.
0
L
A string of total mass M and total length L is xed at both ends, stretched so that the speed of
waves on the string is v. It is plucked so that it harmonically vibrates in its n = 4 mode:
y(x, t) = Asin(k
4
x)cos(
4
t).
Find the instantaneous total energy in the string in terms of M, L, n = 4, v and A (although it
will simplify matters to use
4
and
4
once you dene them in terms of the givens).
If you are a physics or math major, the word nd should be interpreted as derive,
following the derivation presented in the book. All others can get by from remembering the general
way the total energy scales with the givens in understandable ways to lead to the formula derived
in the book above.
For those who attempt the derivation, remember (or FYI):
_
n
0
sin
2
(u)du =
_
n
0
cos
2
(u)du =
n
2
Week 11: Sound 449
Optional Problems
Continue studying for the nal exam! Only one more week of class (and one
chapter) to go in this textbook! Dont wait until the last moment to start!
450 Week 11: Sound
Week 11: Sound
Sound Summary
Speed of Sound in a uid
v =
(942)
where B is the bulk modulus of the uid and is the density. These quantities vary with
pressure and temperature.
Speed of Sound in air is v
a
340 m/sec.
Travelling Sound waves:
Plane (displacement) waves (in the x-direction):
s(x, t) = s
0
sin(kx t)
Spherical waves:
s(r, t) = s
0
R
(
4) r
sin(kr t)
where R is a reference length needed to make the units right corresponding physically to the
size of the source (e.g. the smallest ball that can be drawn that completely contains the
source). The
4 is needed so that the intensity has the right functional form for a spherical
wave (see below).
Pressure Waves: The pressure waves that correspond to these two displacement waves are:
P(x, t) = P
0
cos(kx t)
and
P(r, t) = P
0
R
(
4) r
cos(kr t)
where P
0
= v
a
s
0
= Zs
0
with Z = v
a
=
B (a conversion factor that scales microscopic

displacement to pressure). Note that:
P(x, t) = Z
d
dt
s(x, t)
or, the displacement wave is a scaled derivative of the pressure wave.
The pressure waves represent the oscillation of the pressure around the baseline ambient pres-
sure P
a
, e.g. 1 atmosphere. The total pressure is really P
a
+ P(x, t) or P
a
+ P(r, t) (and we
could easily put a in front of e.g. P(r, t) to emphasize this point but dont so as to not
confuse variation around a baseline with a derivative).
451
452 Week 11: Sound
Sound Intensity: The intensity of sound waves can be written:
I =
1
2
v
a
2
s
2
0
or
I =
1
2
1
v
a
P
2
0
=
1
2Z
P
2
0
Spherical Waves: The intensity of spherical sound waves drops o like 1/r
2
(as can be seen
from the previous two points). It is usually convenient to express it in terms of the total
power emitted by the source P
tot
as:
I =
P
tot
4r
2
This is the total power emitted divided by the area of the sphere of radius r through which
all the power must symmetrically pass and hence it makes sense! One can, with some eort,
take the intensity at some reference radius r and relate it to P
0
and to s
0
, and one can easily
relate it to the intensity at other radii.
Decibels: Audible sound waves span some 20 orders of magnitude in intensity. Indeed, the
ear is barely sensitive to a doubling of intensity this is the smallest change that registers as
a change in audible intensity. This motivate the use of sound intensity level measured in
decibels:
= 10 log
10
_
I
I
0
_
(dB)
where the reference intensity I
0
= 10
12
watts/meter
2
is the threshold of hearing, the
weakest sound that is audible to a normal human ear.
Important reference intensities to keep in mind are:
60 dB: Normal conversation at 1 m.
85 dB: Intensity where long term continuous exposure may cause gradual hearing loss.
120 dB: Hearing loss is likely for anything more than brief and highly intermittent ex-
posures at this level.
130 dB: Threshold of pain. Pain is bad.
140 dB: Hearing loss is immediate and certain you are actively losing your hearing
during any sort of prolonged exposure at this level and above.
194.094 dB: The upper limit of undistorted sound (overpressure equal to one atmosphere).
This loud a sound will instantly rupture human eardrums 50% of the time.
Doppler Shift: Moving Source
f
=
f
0
(1
v
s
v
a
)
(943)
where f
0
is the unshifted frequency of the sound wave for receding (+) and approaching (-)
source, where v
s
is the speed of the source and v
a
is the speed of sound in the medium (air).
Doppler Shift: Moving Receiver
f
= f
0
(1
v
r
v
a
) (944)
where f
0
is the unshifted frequency of the sound wave for receding (-) and approaching (+)
receiver, where v
r
is the speed of the source and v
a
is the speed of sound in the medium (air).
Week 11: Sound 453
Stationary Harmonic Waves
y(x, t) = y
0
sin(kx) cos(t) (945)
for displacement waves in a pipe of length L closed at one or both ends. This solution has a
node at x = 0 (the closed end). The permitted resonant frequencies are determined by:
kL = n (946)
for n = 1, 2... (both ends closed, nodes at both ends) or:
kL =
2n 1
2
(947)
for n = 1, 2, ... (one end closed, nodes at the closed end).
Beats If two sound waves of equal amplitude and slightly dierent frequency are added:
s(x, t) = s
0
sin(k
0
x
0
t) +s
0
sin(k
1
x
1
t) (948)
= 2s
0
sin(
k
0
+k
1
2
x

0
+
1
2
t) cos(
k
0
k
1
2
x

0
1
2
t) (949)
which describes a wave with the average frequency and twice the amplitude modulated so that
it beats (goes to zero) at the dierence of the frequencies f = |f
1
f
0
|.
11.1: Sound Waves in a Fluid
Waves propagate in a uid much in the same way that a disturbance propagates down a closed hall
crowded with people. If one shoves a person so that they knock into their neighbor, the neighbor
falls against their neighbor (and shoves back), and their neighbor shoves against their still further
neighbor and so on.
Such a wave diers from the transverse waves we studied on a string in that the displacement of
the medium (the air molecules) is in the same direction as the direction of propagation of the wave.
This kind of wave is called a longitudinal wave.
Although dierent, sound waves can be related to waves on a string in many ways. Most of the
similarities and dierences can be traced to one thing: a string is a one dimensional medium and is
characterized only by length; a uid is typically a three dimensional medium and is characterized
by a volume.
Air (a typical uid that supports sound waves) does not support tension, it is under pressure.
When air is compressed its molecules are shoved closer together, altering its density and occupied
volume. For small changes in volume the pressure alters approximately linearly with a coecient
called the bulk modulus B describing the way the pressure increases as the fractional volume
decreases. Air does not have a mass per unit length , rather it has a mass per unit volume, .
The velocity of waves in air is given by
v
a
=
343m/sec (950)
The approximately here is fairly serious. The actual speed varies according to things like the
air pressure (which varies signicantly with altitude and with the weather at any given altitude
as low and high pressure areas move around on the earths surface) and the temperature (hotter
molecules push each other apart more strongly at any given density). The speed of sound can vary
by a few percent from the approximate value given above.
454 Week 11: Sound
11.2: Sound Wave Solutions
Sound waves can be characterized one of two ways: as organized uctuations in the position of
the molecules of the uid as they oscillate around an equilibrium displacement or as organized
uctuations in the pressure of the uid as molecules are crammed closer together or are diven
farther apart than they are on average in the quiescent uid.
Sound waves propagate in one direction (out of three) at any given point in space. This means
that in the direction perpendicular to propagation, the wave is spread out to form a wave front.
The wave front can be nearly arbitrary in shape initially; thereafter it evolves according to the
mathematics of the wave equation in three dimensions (which is similar to but a bit more complicated
than the wave equation in one dimension).
To avoid this complication and focus on general properties that are commonly encountered, we
will concentrate on two particular kinds of solutions:
a) Plane Wave solutions. In these solutions, the entire wave moves in one direction (say the x
direction) and the wave front is a 2-D plane perpendicular to the direction of propagation.
These (displacement) solutions can be written as (e.g.):
s(x, t) = s
0
sin(kx t) (951)
where s
0
is the maximum displacement in the travelling wave (which moves in the x direction)
and where all molecules in the entire plane at position x are displaced by the same amount.
Waves far away from the sources that created them are best described as plane waves. So are
waves propagating down a constrained environment such as a tube that permits waves to only
travel in one direction.
b) Spherical Wave solutions. Sound is often emitted from a source that is highly localized (such
as a hammer hitting a nail, or a loudspeaker). If the sound is emitted equally in all directions
from the source, a spherical wavefront is formed. Even if it is not emitted equally in all
directions, sound from a localized source will generally form a spherically curved wavefront as
it travels away from the point with constant speed. The displacement of a spherical wavefront
decreases as one moves further away from the source because the energy in the wavefront is
spread out on larger and larger surfaces. Its form is given by:
s(r, t) =
s
0
r
sin(kr t) (952)
where r is the radial distance away from the point-like source.
11.3: Sound Wave Intensity
The energy density of sound waves is given by:
dE
dV
=
1
2
2
s
2
(953)
(again, very similar in form to the energy density of a wave on a string). However, this energy per
unit volume is propagated in a single direction. It is therefore spread out so that it crosses an area,
not a single point. Just how much energy an object receives therefore depends on how much area it
intersects in the incoming sound wave, not just on the energy density of the sound wave itself.
For this reason the energy carried by sound waves is best measured by intensity: the energy per
unit time per unit area perpendicular to the direction of wave propagation. Imagine a box with sides
Week 11: Sound 455
given by A (perpendicular to the direction of the waves propagation) and vt (in the direction
of the waves propagation. All the energy in this box crosses through A in time t. That is:
E = (
1
2
2
s
2
)Avt (954)
or
I =
E
At
=
1
2
2
s
2
v (955)
which looks very much like the power carried by a wave on a string. In the case of a plane wave
propagating down a narrow tube, it is very similar the power of the wave is the intensity times
the tubes cross section.
However, consider a spherical wave. For a spherical wave, the intensity looks something like:
I(r, t) =
1
2
2
s
2
0
sin
2
(kr t)
r
2
v (956)
which can be written as:
I(r, t) =
P
tot
4r
2
(957)
where P
tot
is the total power in the wave.
This makes sense from the point of view of energy conservation and symmetry. If a source emits
a power P
tot
, that energy has to cross each successive spherical surface that surrounds the source.
Those surfaces have an area equal to A = 4r
2
. Thus the surface at r = 2r
0
has 4 times the area of
one at r = r
0
, but the same total power has to go through both surfaces. Consequently, the intensity
at the r = 2r
0
surface has to be 1/4 the intensity at the r = r
0
surface.
It is important to remember this argument, simple as it is. Think back to Newtons law of
gravitation. Remember that gravitational eld diminishes as 1/r
2
with the distance from the source.
Electrostatic eld also diminishes as 1/r
2
. There seems to be a shared connection between symmetric
propagation and spherical geometry; this will form the basis for Gausss Law in electrostatics and
much beautiful math.
11.3.1: Sound Displacement and Intensity In Terms of Pressure
The pressure in a sound wave (as noted) oscillates around the mean/baseline ambient pressure of the
air (or water, or whatever). The pressure wave in sound is thus the time varying pressure dierence
the amplitude of the pressure oscillation around the mean of normal atmospheric pressure.
As always, we will be interested in writing the pressure as a harmonic wave (where we can) and
hence will use the peak pressure dierence as the amplitude of the wave. We will call this pressure
the (peak) overpressure:
P
0
= P
max
P
a
(958)
where P
a
is the baseline atmospheric pressure. It is easy enough to express the pressure wave in
terms of the displacement wave (and vice versa). The amplitudes are related by:
P
0
= v
a
s
0
= Zs
0
(959)
where Z = v
a
, the product of the speed of sound in air and the air density. The pressure and
displacement waves are /2 out of phase! with the pressure wave leading the displacement wave:
P(t) = P
0
cos(kx t) (960)
(for a one-dimensional plane wave, use kr and put it over 1/r to make a spherical wave as before).
The displacement wave is (Z times) the time derivative of the pressure wave, note well.
456 Week 11: Sound
The intensity of a sound wave can also be expressed in terms of pressure (rather than displace-
ment). The expression for the intensity is then very simple (although not so simple to derive):
I =
P
2
0
2Z
=
P
2
0
2v
a
(961)
Week 11: Sound 457
11.3.2: Sound Pressure and Decibels
Source of Sound P (Pa) I dB
Auditory threshold at 1 kHz 2 10
5
10
12
0
Light leaf rustling, calm breathing 6.32 10
5
10
11
10
Very calm room 3.56 10
4
3.16 10
12
25
A Whisper 2 10
3
10
8
40
Washing machine, dish washer 6.32 10
3
10
7
50
Normal conversation at 1 m 2 10
2
10
6
60
Normal (Ambient) Sound 6.32 10
2
10
5
70
Loud Passenger Car at 10 m 2 10
1
10
4
80
Hearing Damage Possible 0.356 3.16 10
4
85
Trac On Busy Roadway at 10 m 0.356 3.16 10
4
85
Jack Hammer at 1 m 2 10
2
100
Normal Stereo at Max Volume 2 10
2
100
Jet Engine at 100 m 6.32-200 10
1
to 10
3
110-140
Hearing Damage Likely 20 1 120
Vuvuzela Horn 20 1 120
Rock Concert (The Who 1982) at 32 m 20 1 120
Threshold of Pain 63.2 10 130
Marching Band (100-200 members, in front) 63.2 10 130
Very Loud Car Stereo 112 31.6 135
Hearing Damage Immediate, Certain 200 10
2
140
Jet Engine at 30 m 632 10
3
150
Rock Concert (The Who 1982) at speakers 632 10
3
150
30-06 Rie 1 m to side 6,320 10
5
170
Stun Grenades 20,000 10
6
180
Limit of Undistorted Sound 101,325 2.51 10
7
194.094
(human eardrums rupture 50% of time) (1 atm)
Table 5: Table of (approximate) P
0
and sound pressure levels in decibels relative to the threshold of
human hearing at 10
12
watts/m
2
. Note that ordinary sounds only extend to a peak overpressure
of P
0
= 1 atmosphere, as one cannot oscillate symmetrically to underpressures pressures less than
a vacuum.
The one real problem with the very simple description of sound intensity given above is one of
scale. The human ear is routinely exposed to and sensitive to sounds that vary by twenty
orders of magnitude from sounds so faint that they barely can move our eardrums to sounds
so very loud that they immediately rupture them! Even this isnt the full range of sounds out there
microphones and ampliers allow us to detect even weaker sounds as much as eight orders of
magnitude weaker and much stronger sounds called shock waves, produced by supersonic events
such as explosions. The strongest supersonic sounds are some 32 orders of magnitude louder
than the weakest sounds the human ear can detect, although even the weakest shock waves are
almost strong enough to kill people.
It is very inconvenient to have to describe sound intensity in scientic notion across this wide a
range basically 40 orders of magnitude if not more (the limits of technology not being well dened
at the low end of the scale). Also the human mind does not respond to sounds linearly. We do not
psychologically perceive of sounds twice as intense as being twice as loud in fact, a doubling of
intensity is barely perceptible. Both of these motivate our using a dierent scale to represent sound
intensities a relative logarithmic scale, called decibels
197
.
197
Wikipedia: http://www.wikipedia.org/wiki/Decibel. Note well that the term decibel is not restricted to sound
458 Week 11: Sound
The denition of a sound decibel is:
= 10 log
10
_
I
I
0
_
dB (962)
where dB is the abbreviation for decibels (tenths of bels, the same unit without the factor of
10). Note that log
10
is log base 10, not the natural log, in this expression. Also in this expression,
I
0
= 10
12
watts/meter
2
(963)
is the reference intensity, called the threshold of hearing. It is, by denition, the faintest sound
the human ear can hear although naturally Your Mileage May Vary here the faintest sound my
relatively old and deaf ears is very likely much louder than the faintest sound a young child can
hear, and there obviously some normal variation (a few dB) from person to person at any given age.
The smallest increments of sound that the human ear can dierentiate as being louder are
typically two decibel increases more likely 3. Lets see what a doubling the intensity does to
the decibel level of the sound.
= 10
_
log
10
_
2I
I
0
_
log
10
_
I
I
0
__
= 10 log
10
_
2I
I
0
I
0
I
_
= 10 log
10
(2)
= 3.01dB (964)
In other words, doubling the sound intensity from any value corresponds to an increase
in sound intensity level of 3 dB! This is such a simple rule that it is religiously learned as a
rule of thumb by engineers, physicists and others who have reason to need to work with intensities
of any sort on a log (decibel) scale. 3 dB per factor of two in intensity can carry you a long, long
way! Note well that we used one of the magic properties of logarithms/exponentials in this algebra
(in case you are confused):
log(A) log(B) = log
_
A
B
_
(965)
You should remember this; it will be very useful next year.
Table 5 presents a number of fairly common sounds, sounds you are likely to have directly or
indirectly heard (if only from far away). Each sound is cross-referenced with the approximate peak
overpressure P
0
in the sound pressure wave (in pascals), the sound intensity (in watts/meter
2
),
and the sound intensity level relative to the threshold of hearing in decibels.
The overpressure is the pressure over the background of (a presumed) 1 atm in the sinusoidal
pressure wave. The actual peak pressure would then be P
max
= P
a
+P
0
while the minimum pressure
would be P
min
= P
a
P
0
. P
min
, however, cannot be negative as the lowest possible pressure is a
vacuum, P = 0! At overpressures greater than 1 atm, then, it is no longer possible to have a pure
sinusoidal sound wave. Waves in this category are a train of highly compressed peak amplitudes that
drop o to (near) vacuum troughs in between, and are given their own special name: shock waves.
Shock waves are typically generated by very powerful phenomena and often travel faster than the
speed of sound in a medium. Examples of shock waves are the sonic boom of a jet that has broken
the sound barrier and the compression waves produced by suciently powerful explosives (close to
the site of the explosion).
Shock waves as table 6 below clearly indicates, are capable of tearing the human body apart
and accompany some of the most destructive phenomena in nature and human aairs exploding
volcanoes and colliding asteroids, conventional and nuclear bombs.
it is rather a way of transforming any quantity that varies over a very large (many orders of magnitude) range into a
log scale. Other logarithmic scales you are likely to encounter include, for example, the Richter scale (for earthquakes)
and the F-scale for tornadoes.
Week 11: Sound 459
Source of Sound P
0
(Pa) dB
All sounds beyond this point
are nonlinear shock waves
Human Death from Shock Wave Alone 200,000 200
1 Ton of TNT 632,000 210
Largest Conventional Bombs 2,000,000 220
1000 Tons of TNT 6,320,000 230
20 Kiloton Nuclear Bomb 63,200,000 250
57 Megaton (Largest) Nuclear Bomb 2,000,000,000 280
Krakatoa Volcanic Explosion (1883 C.E.) 63,200,000,000 310
Tambora Volcanic Explosion (1815 C.E.) 200,000,000,000 320
Table 6: Table of (approximate) P
0
and sound pressure levels in decibels relative to the threshold
of human hearing at 10
12
watts/m
2
of shock waves, events that produce distorted overpressures
greater than one atmosphere. These sounds can be quite extreme! The Krakatoa explosion cracked
a 1 foot thick concrete wall 300 miles away, was heard 3100 miles away, ejected 4 cubic miles of the
earth, and created an audible pressure antinode on the opposite side of the earth. Tambora ejected
36 cubic miles of the earth and was equivalent to a 14 gigaton nuclear explosion (14,000 1 megaton
nuclear bombs)!
11.4: Doppler Shift
Everybody has heard the doppler shift in action. It is the rise (or fall) in frequency observed when a
source/receiver pair approach (or recede) from one another. In this section we will derive expressions
for the doppler shift for moving source and moving receiver.
11.4.1: Moving Source
v T
s

Source Receiver
s
v
0
Figure 133: Waves from a source moving towards a stationary receiver have a foreshortened wave-
length because the source moves in to the wave it produces. The key to getting the frequency shift
is to recognize that the new (shifted) wavelength is
=
0
v
s
T where T is the unshifted period
of the source.
Suppose your receiver (ear) is stationary, while a source of harmonic sound waves at xed fre-
quency f
0
is approaching you. As the waves are emitted by the source they have a xed wavelength
0
= v
a
/f
0
= v
a
T and expand spherically from the point where the source was at the time the
wavefront was emitted.
However, that point moves in the direction of the receiver. In the time between wavefronts (one
period T) the source moves a distance v
s
T. The shifted distance between successive wavefronts in
the direction of motion (
) can easily be determined from an examination of gure 133 above:
=
0
v
s
T (966)
We would really like the frequency of the doppler shifted sound. We can easily nd this by using
460 Week 11: Sound
= v
a
/f
and = v
a
/f. We substitute and use f = 1/T:
v
a
f
=
v
a
v
s
f
0
(967)
then we factor to get:
f
=
f
0
1
v
s
v
a
(968)
If the source is moving away from the receiver, everything is the same except now the wavelength
is shifted to be bigger and the frequency smaller (as one would expect from changing the sign on
the velocity):
f
=
f
0
1 +
v
s
v
a
(969)
11.4.2: Moving Receiver
Source
v
v
r
T v
a
T
r
0
Receiver
Figure 134: Waves from a stationary source are picked up by a moving receiver. They have a
shortened period because the receiver doesnt wait for the next wavefront to reach it, at receives
it when it has only moved part of a wavelength forward. The key to getting the frequency shift is
to recognize that the sum of the distance travelled by the wave and the receiver in a new period T
must equal the original unshifted wavelength.

Now imagine that the source of waves at frequency f
0
is stationary but the receiver is moving
towards the source. The source is thus surrounded by spherical wavefronts a distance
0
= v
a
T apart.
At t = 0 the receiver crosses one of them. At a time T
later, it has moved a distance d = v

r
T
in
the direction of the source, and the wave from the source has moved a distance D = v
a
T
toward
the receiver, and the receiver encounters the next wave front.
This can be visualized in gure 134 above. From it we can easily get:
0
= d +D (970)
= v
r
T
+v
a
T
(971)
= (v
r
+v
a
)T
(972)
v
a
T = (v
r
+v
a
)T
(973)
We use f
0
= 1/T, f
= 1/T
(where T
is the apparent time between wavefronts to the receiver)

and rearrange this into:
f
= f
0
(1 +
v
r
v
a
) (974)
Again, if the receiver is moving away from the source, everything is the same but the sign of v
r
,
so one gets:
f
= f
0
(1
v
r
v
a
) (975)
Week 11: Sound 461
11.4.3: Moving Source and Moving Receiver
This result is just the product of the two above moving source causes one shift and moving receiver
causes another to get:
f
= f
0
1
v
r
v
a
1
v
s
v
a
(976)
where in both cases relative approach shifts the frequency up and relative recession shifts the fre-
quency down.
I do not recommend memorizing these equations I dont have them memorized myself. It is
very easy to confuse the forms for source and receiver, and the derivations take a few seconds and
are likely worth points in and of themselves. If youre going to memorize anything, memorize the
derivation (a process I call learning, as opposed to memorizing). In fact, this is excellent advice
for 90% of the material you learn in this course!
11.5: Standing Waves in Pipes
Everybody has created a stationary resonant harmonic sound wave by whistling or blowing over a
beer bottle or by swinging a garden hose or by playing the organ. In this section we will see how to
compute the harmonics of a given (simple) pipe geometry for an imaginary organ pipe that is open
or closed at one or both ends.
The way we proceed is straightforward. Air cannot penetrate a closed pipe end. The air molecules
at the very end are therefore xed they cannot displace into the closed end. The closed end of
the pipe is thus a displacement node. In order not to displace air the closed pipe end has to exert a
force on the molecules by means of pressure, so that the closed end is a pressure antinode.
At an open pipe end the argument is inverted. The pipe is open to the air (at xed back-
ground/equilibrium pressure) so that there must be a pressure node at the open end. Pressure and
displacement are /2 out of phase, so that the open end is also a displacement antinode.
Actually, the air pressure in the standing wave doesnt instantly equalize with the background
pressure at an open end it sort of bulges out of the pipe a bit. The displacement antinode is
therefore just outside the pipe end, not at the pipe end. You may still draw a displacement antinode
(or pressure node) as if they occur at the open pipe end; just remember that the distance from the
open end to the rst displacement node is not a very accurate measure of a quarter wavelength and
that open organ pipes are a bit longer than they appear from the point of view of computing their
resonant harmonics.
Once we understand the boundary conditions at the ends of the pipes, it is pretty easy to write
down expressions for the standing waves and to deduce their harmonic frequencies.
11.5.1: Pipe Closed at Both Ends
As noted above, we expect a displacement node (and hence pressure antinode at the closed
end of a pipe, as air molecules cannot move through a solid surface. For a pipe closed at both ends,
then, there are displacement nodes at both ends, as pictured above in gure 135. This is just like a
string xed at both ends, and the solutions thus have the same functional form:
s(x, t) = s
0
sin(k
m
x) cos(
m
t) (977)
This has a node at x = 0 for all k. To get a node at the other end, we require (as we did for the
string):
sin(k
m
L) = 0 (978)
462 Week 11: Sound
s
x L
A N A
A N N
m = 1
m = 2
Figure 135: The pipe closed at both ends is just like a string xed at both ends, as long as one
considers the displacement wave.
or
k
m
L = m (979)
for m = 1, 2, 3.... This converts to:
m
=
2L
m
(980)
and
f
m
=
v
a
m
=
v
a
m
2L
(981)
The m = 1 solution (rst harmonic) is called the principle harmonic as it was before. The actual
tone of a ute pipe with two closed ends will be a superposition of harmonics, usually dominated by
the principle harmonic.
11.5.2: Pipe Closed at One End
m = 2
s
x
N A
L
A N A
m = 1
Figure 136: The pipe closed at both ends is just like a string xed at one end, as long as one
considers the displacement wave.
In the case of a pipe open at only one end, there is a displacement node at the closed end,
and a displacement antinode at the open end. If one considers the pressure wave, the positions
of nodes and antinodes are reversed. This is just like a string xed at one end and free at the other.
Lets arbitrarily make x = 0 the closed end. Then:
s(x, t) = s
0
sin(k
m
x) cos(
m
t) (982)
Week 11: Sound 463
has a node at x = 0 for all k. To get an antinode at the other end, we require:
sin(k
m
L) = 1 (983)
or
k
m
L =
2m2
2
(984)
for m = 1, 2, 3... (odd half-integral multiples of . As before, you will see dierent conventions used
to name the harmonics, with some books asserting that only odd harmonics are supported, but I
prefer to make the harmonic index do exactly the same thing for both pipes so it counts the actual
number of harmonics that are supported by the pipe. This is much more consistent with what one
will do next semester considering e.g. interference, where one often encounters similar series for a
phase angle in terms of odd-half integer multiples of , and makes the second harmonic the lowest
frequency actually present in the pipe in all three cases of pipes closed at neither, one or both ends.
This converts to:
m
=
4L
2m1
(985)
and
f
m
=
v
a
m
=
v
a
(2m1)
4L
(986)
11.5.3: Pipe Open at Both Ends
m = 2
s
x
L
m = 1
A A
N A A
N A N
Figure 137: A pipe open at both ends is the exact opposite of a pipe (or string) closed (xed) at
both ends: It has displacement antinodes at the ends. Note well the principle harmonic with a single
node in the center. The resonant frequency series for the pipe is the same, however, as for a pipe
closed at both ends!
This is a panpipe, one of the most primitive (and beautiful) of musical instruments. A panpipe
is nothing more than a tube, such as a piece of hollow bamboo, open at both ends. The modes of
this pipe are driven at resonance by blowing gently across one end, where the random uctuations
in the airstream are amplied only for the resonant harmonics.
To understand the frequencies of those harmonics, we note that there are displacement antin-
odes at both ends. This is just like a string free at both ends. The displacement solution must
thus be a cosine in order to have a displacement antinode at x = 0:
s(x, t) = s
0
cos(k
m
x) cos(
m
t) (987)
and
cos(k
m
L) = 1 (988)
464 Week 11: Sound
We can then write k
m
L as a series of suitable multiples of and proceed as before to nd the
wavelengths and frequencies as a function of the mode index m = 1, 2, 3.... This is left as a (simple)
exercise for you.
Alternatively, we could also note that there are pressure nodes at both ends, which makes them
like a string xed at both ends again as far as the pressure wave is concerned. This gives us exactly
the same result (for frequencies and wavelengths) as the pipe closed at both ends above, although
the pipe open at both ends is probably going to be a bit louder and easier to drive at resonance (how
can you blow on a closed pipe to get the waves in there in the rst place? How can the sound get
out?
Either way one will get the same frequencies but the picture of the displacement waves is dierent
from the picture of the pressure waves be sure to draw displacement antinodes at the open ends
if you are asked to draw a displacement wave, or vice versa for a pressure wave!
You might try drawing the rst 2-3 harmonics on a suitable picture like the rst two given above,
with displacement antinodes at both ends. What does the principle harmonic look like? Show that
the supported frequencies and wavelengths match those of the string xed at both ends, or pipe
closed at both ends.
11.6: Beats
If you have ever played around with a guitar, youve probably noticed that if two strings are ngered
to be the same note but are really slightly out of tune and are struck together, the resulting sound
beats it modulates up and down in intensity at a low frequency often in the ballpark of a few
cycles per second.
Beats occur because of the superposition principle. We can add any two (or more) solutions to
the wave equation and still get a solution to the wave equation, even if the solutions have dierent
frequencies. Recall the identity:
sin(A) + sin(B) = 2 sin(
A+B
2
) cos(
AB
2
) (989)
If one adds two waves with dierent wave numbers/frequencies and uses this rule, one gets
s(x, t) = s
0
sin(k
0
x
0
t) +s
0
sin(k
1
x
1
t) (990)
= 2s
0
sin(
k
0
+k
1
2
x

0
+
1
2
t) cos(
k
0
k
1
2
x

0
1
2
t) (991)
This describes a wave that has twice the maximum amplitude, the average frequency (the rst
term), and a second term that (at any point x) oscillates like cos(
t
2
).
The frequency of this second modulating term is
f
0
f
1
2
, but the ear cannot hear the inversion of
phase that occurs when it is negative and the dierence is small. It just hears maximum amplitude
in the rapidly oscillating average frequency part, which goes to zero when the slowing varying cosine
does, twice per cycle. The ear then hears two beats per cycle, making the beat frequency:
f
beat
= f = |f
0
f
1
| (992)
11.7: Interference and Sound Waves
We will not cover interference and diraction of harmonic sound waves in this course. Beats are a
common experience in sound as is the doppler shift, but sound wave interference is not so common
Week 11: Sound 465
an experience (although it can denitely and annoyingly occur if you hook up speakers in your stereo
out of phase). Interference will be treated next semester in the context of coherent light waves. Just
to give you a head start on that, well indicate the basic ideas underlying interference here.
Suppose you have two sources that are at the same frequency and have the same amplitude and
phase but are at dierent locations. One source might be a distance x away from you and the other
a distance x + x away from you. The waves from these two sources add like:
s(x, t) = s
0
sin(kx t) +s
0
sin(k(x + x) t) (993)
= 2s
0
sin(k(x +
x
2
t) cos(k
x
2
) (994)
The sine part describes a wave with twice the amplitude, the same frequency, but shifted slightly
in phase by kx/2. The cosine part is time independent and modulates the rst part. For some
values of x it can vanish. For others it can have magnitude one.
The intensity of the wave is what our ears hear they are insensitive to the phase (although
certain echolocating species such as bats may be sensitive to phase information as well as frequency).
The average intensity is proportional to the wave amplitude squared:
I
0
=
1
2
2
s
2
0
v (995)
With two sources (and a maximum amplitude of two) we get:
I =
1
2
2
(2
2
s
2
0
cos
2
(k
x
2
)v (996)
= 4I
0
cos
2
(k
x
2
) (997)
There are two cases of particular interest in this expression. When
cos
2
(k
x
2
) = 1 (998)
one has four times the intensity of one source at peak. This occurs when:
k
x
2
= n (999)
(for n = 0, 1, 2...) or
x = n (1000)
If the path dierence contains an integral number of wavelengths the waves from the two sources
arrive in phase, add, and produce sound that has twice the amplitude and four times the intensity.
This is called complete constructive interference.
On the other hand, when
cos
2
(k
x
2
) = 0 (1001)
the sound intensity vanishes. This is called destructive interference. This occurs when
k
x
2
=
2n + 1
2
(1002)
(for n = 0, 1, 2...) or
x =
2n + 1
2
(1003)
If the path dierence contains a half integral number of wavelengths, the waves from two sources
arrive exactly out of phase, and cancel. The sound intensity vanishes.
466 Week 11: Sound
You can see why this would make hooking your speakers up out of phase a bad idea. If you
hook them up out of phase the waves start with a phase dierence of one speaker is pushing out
while the other is pulling in. If you sit equidistant from the two speakers and then harmonic waves
with the same frequency from a single source coming from the two speakers cancel as they reach you
(usually not perfectly) and the music sounds very odd indeed, because other parts of the music are
not being played equally from the two speakers and dont cancel.
You can also see that there are many other situations where constructive or destructive interfer-
ence can occur, both for sound waves and for other waves including water waves, light waves, even
waves on strings. Our standing wave solution can be rederived as the superposition of a left- and
right-travelling harmonic wave, for example. You can have interference from more than one source,
it doesnt have to be just two.
This leads to some really excellent engineering. Ultrasonic probe arrays, radiotelescope arrays,
sonar arrays, diraction gratings, holograms, are all examples of interference being put to work. So
it is worth it to learn the general idea as early as possible, even if it isnt assigned.
11.8: The Ear
Figure 138: The anatomy of the human ear.
Figure 138 shows a cross-section of the human ear, our basic transduction device for sound. This
is not a biology course, so we will not dwell upon all of the structure visible in this picture, but
rather will concentrate on the parts relevant to the physics.
Lets start with the outer ear. This structure collects sound waves from a larger area than the
ear canal per se and reects them down to the ear canal. You can easily experiment with the kind
of amplication that results from this by cupping your hands and holding them immediately behind
your ears. You should be able to hear both a qualitative change in the frequencies you are hearing
and an eective amplication of the sounds from in front of you at the expense of sounds originating
behind you. Many animals have larger outer ears oriented primarily towards the front, and have
muscles that permit them to further alter the direction of most favorable sound collection without
turning their heads. Human ears are more nearly omnidirection.
The auditory canal (ear canal in the gure above) acts like a resonant cavity to eectively
amplify frequencies in the 2.5 kHz range and tune energy deliver to the tympanic membrane or
Week 11: Sound 467
eardrum. This membrane is a strong, resilient, tightly stretched structure that can vibrate in
response to driving sound waves. It is connected to a collection of small bones (the ossicles) that
conduct sound from the eardrum to the inner ear and that constitute the middle ear in the gure
above. The common name of the ossicles are: hammer, anvil and stirrup, the latter so named because
its shape strongly resembles that of the stirrup on a horse saddle. The anvil eectively amplies
oscillations by use of the principle of leverage, as a fulcrum attachment causes the stirrup end to
vibrate through a much larger amplitude than the hammer end. The stirrup is directly connected
to the oval window, the gateway into the inner ear.
The middle ear is connected to the eustachian tube to your throat, permitting pressure inside
your middle ear to equalize with ambient air pressure outside. If you pinch your nose, close your
mouth, and try to breath out hard, you can actually blow air out through your ears although this is
unpleasant and can be dangerous. This is one way your ears equilbrate by popping when you ride
a car up a hillside or y in an airplane. If/when this does not happen, pressure dierences across
the tympanic membrane reduce its response to ambient sounds reducing auditory acuity.
Figure 139: A cross-section of the spiral structure of the cochlea.
Sound, amplifed by focal concentration in the outer ear, resonance in the auditory canal, and
mechanical leverage in the ossicles, enters the cochlea, a shell-shaped spiral that is the primary
organ of hearing that transduces sound energy into impulses in our nervous system through the oval
window. The cochlea contains hair cells of smoothly varying length lining the narrowing spiral,
each of which is resonant to a particular auditory frequency. The arrangement of the cells in a
cross-section of the cochlea is shown in gure 139.
The nerves stretching from these cells are collected into the auditory nerve bundle and from
thence carries the impulses they give o when they receive sound at the right frequency in to the
auditory cortex (not shown) where it becomes, eventually and through a process still not fully
understood, our perception of sound. Our brains take this frequency resolved information the
biomechanical equivalent of a fourier transform of the sound signal, in a way and synthesize it
back into a detailed perception of sound and music within the general frequency range of 10 Hz to
20,000 Hz.
As you can see, there are many individual parts that can fail in the human auditory system.
Individuals can lose or suer damage to their outer ears through accident or disease. The ear canal
can become clogged with cerumen, or earwax, a waxy uid that normally cleans and lubricates the
ear canal and eardrum but that can build up and dry out to both load the tympanic membrane
so it becomes less responsive and physically occlude part of the canal so less sound energy can get
through. The eardrum itself is vulnerable to sudden changes in sound pressure or physical contact
that can puncture it. The middle ear, as a closed, warm, damp cavity connected to the throat, is an
ideal breeding ground for certain bacteria that can cause infections and swelling that both interfere
with or damage hearing and that can be quite painful. The ossicles are susceptible to physical
468 Week 11: Sound
trauma and infectious damage.
Finally, the hair cells of the cochlea itself, which are safely responsive over at least twelve to
fourteen orders of magnitude of transient sound intensity (and safely responsive over eight or nine
orders of magnitude of sustained sound intensity) are highly vulnerable to both sudden transient
sounds of still higher intensity (e.g. sound levels in the vicinity of 120 to 140 decibels and higher
and to sustained excitation at sound levels from roughly 90 decibels and higher. Both disease and
medical conditions such as diabetes (that produces a progressive neuropathy) can further contribute
to gradual or acute hearing loss at the neurological level.
When hair cells die, they do not regenerate and hearing loss of this sort is thus cumulative over
a lifetime. It is therefore a really good idea to wear ear protectors if, for example, you play an
instrument in a marching band or a rock and roll band where your hearing is routinely exposed to
100 dB and up sounds. It is also a good reason not to play music too loudly when you are young,
however pleasurable it might seem. One is, after all, very probably trading listening to very loud
music at age seventeen against listening to music at all at age seventy. Hearing aids do not really
x the problem, although they can help restore enough function for somebody to get by.
However, it is quite possible that over the next few decades the bright and motivated physics
students of today will help create the bioelectronic and/or stem cell replacements of key organs and
nervous tissue that will relegate age-related deafness to the past. I would certainly wish, as I sit
here typing this with eyes and ears that are gradually failing as I age, that whether or not it come
in time for me, it comes in time to help you.
Week 11: Sound 469
Problem 1.
470 Week 11: Sound
Problem 2.
aaaaaaaaaa = f
o
Lava
Bill and Ted are falling into hell at a constant speed (terminal velocity), and are screaming at
the frequency f
0
. As they fall, they hear their own voices reecting back to them from the puddle
of molten rock that lies below at a frequency of 2f
0
.
How fast are they falling relative to the speed of sound in warm, dry hellish air?
Week 11: Sound 471
Problem 3.
a b c
A
B
Sound waves travel faster in water than they do in air. Light waves travel faster in air than they
do in water. Based on this, which of the three paths pictured above are more likely to minimize the
time required for the
a) Sound:
b) Light:
produced by an underwater explosion to travel from the explosion at A to the pickup at B? Why
(explain your answers)?
472 Week 11: Sound
Problem 4.
Fred is standing on the ground and Jane is blowing past him at a closest distance of approach of a
few meters at twice the speed of sound in air. Both Fred and Jane are holding a loudspeaker that
has been emitting sound at the frequency f
0
for some time.
a) Who hears the sound produced by the other persons speaker as single frequency sound when
they are approaching one another and what frequency do they hear?
b) What does the other person hear (when they hear anything at all)?
c) What frequenc(ies) do each of them hear after Jane has passed and is receding into the
distance?
Problem 5.
Discuss and answer the following questions:
a) Sunlight reaches the surface of the earth with roughly 1000 Watts/meter
2
of intensity. What is
the sound intensity level of a sound wave that carries as much energy per square meter,
in decibels?
b) In table 5, what kind of sound sources produce this sort of intensity? Bear in mind that the
Sun is 150 million kilometers away where sound sources capable of reaching the same intensity
are typically only a few meters away. The the Sun produces a lot of (electromagnetic) energy
compared to terrestrial sources of (sound) energy.
c) The human body produces energy at the rate of roughly 100 Watts. Estimate the fraction of
this energy that goes into my lecture when I am speaking in a loud voice in front of the class
(loud enough to be heard as loudly as normal conversation ten meters away).
d) Again using table 5, how far away from a jack hammer do you need to stand in order for the
sound to (marginally) no longer be dangerous to your hearing?
Week 11: Sound 473
Problem 6.
String one has mass and is at tension T and has a the travelling harmonic wave on it:
y
1
(x, t) = Asin(kx t)
Identical string two has the superposition of two harmonic travelling waves on it:
y
2
(x, t) = Asin(kx t) + 3Asin(kx +t)
If the energy density (total mechanical energy per unit length) of the rst string is E
1
, what is
the energy density of the second string E
2
in terms of E
1
?
Problem 7.
Two identical strings of length L have mass and are xed at both ends. One string has tension
T. The other has tension 1.21T. When plucked, the rst string produces a tone at frequency f
1
,
the second produces a tone at frequency f
2
.
a) What is the beat frequency produced if the two strings are is plucked at the same time, in
terms of f
1
?
b) Are the beats likely to be audible if f
1
is 500 Hz? How about 50 Hz? Why or why not?
Problem 8.
You measure the sound intensity level of a single frequency sound wave produced by a loudspeaker
with a calibrated microphone to be 80 dB. At that intensity, the peak pressure in the sound wave
at the microphone is P
0
. The loudspeakers amplitude is turned up until the intensity level is 100
dB. What is the peak pressure of the sound wave now (in terms of P
0
)?
Note that you could look this up in the table, but dont. The point is for you to know how the
peak pressure scales with the intensity, as well as how the intensity varies with the sound intensity
level in decibels.
474 Week 11: Sound
Problem 9.
Resonant Sound Waves
Tube closed at one end
An organ pipe is made from a brass tube closed at one end as shown. The pipe has length L and
the speed of sound is v
s
. When played, it produces a sound that is a mixture of the rst, third and
sixth harmonic (mode, counting n = 1, 2, 3...).
a) What are the frequencies of these modes?
b) Qualitatively sketch the wave amplitudes for the rst and the third harmonic modes (only) in
on the gure, indicating the nodes and antinodes. Be sure to indicate whether the nodes or
antinodes drawn are for pressure/density waves or displacement waves!
c) Evaluate your answers numerically when L = 3.4 meters long, and v
s
= 340 meters/second
(as usual).
Week 11: Sound 475
Problem 10.
L
0,1
0,1
f
You crash land on a strange planet and all your apparatus for determining if the planets atmo-
sphere is like Earths is wrecked. In desperation you decide to measure the speed of sound in the
atmosphere before taking o your helmet. You do have a barometer handy and can see that the air
pressure outside is approximately one atmosphere and the temperature seems to be about 300

K,
so if the speed of sound is the same as on Earth the air might be breathable.
You jury rig a piston and cylinder arrangement like the one shown above (where the cylinder is
closed at both ends but has a small hole in the side to let sound energy in to resonate) and take
out your two handy tuning forks, one at f
0
= 3400 Hz and one at f
1
= 6800 Hz.
a) Using the 3400 Hz fork as shown, what do you expect (or rather, hope) to hear as you move
the piston in and out (varying L
0
). In particular, what are the shortest few values of L
0
for
which you expect to hear a maximum resonant intensity from the tube if the speed of sound
in the unknown atmosphere is indeed the same as in air (which you will cleverly note Im not
telling you as you are supposed to know this number)?
b) Using the 6800 Hz fork you hear your rst maximum (for the smallest value of L
1
) at L
1
= 5
cm. Should you sigh with relief and rip o your helmet?
c) What is the next value for L
1
for which you should hear a maximum (given the measurement in
b) and what should the dierence between the two equal in terms of the wavelength of the 6800
Hz wave in the unknown gas? Draw the displacement wave for this case only schematically in
on the diagram above (assuming that the L shown is this second-smallest value of L
1
for the
f
1
tuning fork), and indicate where the nodes and antinodes are.
476 Week 12: Gravity
Optional Problems
Study for the nal exam! This is the last week of class, and this wraps up both the
chapter and the texbook. Students looking for more problems to work on are directed to the online
review guide for introductory physics 1 and the online math review, the latter as needed.
Week 12: Gravity
Gravity Summary
Early western (Greek) cosmology was both geocentric simple earth-centered model with
xed stars lamps or windows on big solid bowl, moon and stars and planets orbiting the
(usually at) Earth somehow in between. The simple geocentric models failed to explain
retrograde motion of the planets, where for a time they seem to go backwards against the
xed stars in their general orbits. There were also early heliocentric sun centered models,
in particular one by Aristarchus of Samos (270 B.C.E.), who used parallax to measure the
size of the earth and the sizes of and distances to the Sun and Moon.
Ptolemy
198
(140 C.E.) explained retrograde motion with a geometric geocentric model
involving complex epicycles. Kudos to Ptolemy for inventing geometric modelling in physics!
The model was a genuine scientic hypothesis, in principle falsiable, and a good starting
place for further research.
Sadly, a few hundred years later the state religion of the western worlds largest empire em-
braced this geocentric model as being consistent with The Book of Genesis in its theistic
scriptural mythology (and with many other passages in the old and new testaments) and for
over a thousand years alternative explanations were considered heretical and could only be
made at substantial personal risk throughout the Holy Roman Empire.
Copernicus
199
(1543 C.E.) (re)invented a heliocentric sun-centered model, explained ret-
rograde motion with simpler plain circular geometry, regular orbits. The work of Copernicus,
De Revolutionibus Orbium Coelestium
200
(On the Revolutions of the Heavenly Spheres) was
forthwith banned by the Catholic Church as heretical at the same time that Galileo was both
persecuted and prosecuted.
Wealthy Tycho Brahe accumulated data and his paid assistant, Johannes Kepler, t that data
to specic orbits and deduced Keplers Laws. All Brahe got for his eorts was a lousy moon
crater named after him
201
.
Keplers Laws:
a) All planets move in elliptical orbits with the sun at one focus.
b) A line joining any planet to the sun sweeps out equal areas in equal times (dA/dt =
constant).
c) The square of the period of any planet is proportional to the cube of the planets mean
distance from the sun (T
2
= CR
3
). Note that the semimajor or semiminor axis of the
ellipse will serve as well as the mean, with dierent contants of proportionality.
198
Wikipedia: http://www.wikipedia.org/wiki/Ptolemy.
199
Wikipedia: http://www.wikipedia.org/wiki/Copernicus.
200
Wikipedia: http://www.wikipedia.org/wiki/De revolutionibus orbium coelestium.
201
Wikipedia: http://www.wikipedia.org/wiki/Tycho (crater).
477
Galileo
202
(1564-1642 C.E.) is known as the Copernican heliocentric models most famous early
defender, not so much because of the quality of his science as for his infamous prosecution
by the Catholic church. In truth, Galileo was a contemporary of Kepler and his work
was nowhere nearly as carefully done or mathematically convincing (or correct!) as Keplers,
although using a telescope he made a number of important discoveries that added considerable
further weight to the argument in favor of heliocentrism in general.
Newton
203
(1642-1727 C.E.) was the inheritor of the tremendous advances of Brahe, Descartes
204
(1596-1650 C.E.), Kepler, and Galileo. Applying the analytic geometry invented by Descartes
to the empirical laws discovered by Kepler and the kinematics invented by Galileo, he was able
to deduce Newtons Law of Gravitation:
F =
GMm
r
2
r (1004)
(a simplied form valid when mass M m, r are coordinates centered on the larger mass
M, and

F is the force acting on the smaller mass); we will learn a more precisely stated
version of this law below. This law fully explained at the limit of observational resoution, and
continues to mostly explain, Keplers Laws and the motions of the planets, moons, comets,
and other visible astronomical objects! Indeed, it allows their orbits to be precisely computed
and extrapolated into the distant past or future from a sucient knowledge of initial state.
In Newtons Law of Gravitation the constant G is a considered to be a constant of nature,
and was measured by Cavendish
205
in a famous experiment, thus (as we shall see) weighing
the planets. The value of G we will use in this class is:
G = 6.67 10
11
N-m
2
kg
2
(1005)
You are responsible for knowing this number! Like g, it is enormously important and
useful as a key to the relative strength of the forces of nature and explanation for why it takes
an entire planet to produce a force on your body that is easily opposed by (for example) a
thin nylon rope.
The gravitational eld is a simplication of Newtons theory of gravitation that emerged
over a considerable period of time with no clear author that attempts to resolve the problem
Newton rst addressed of action at a distance the need for a cause for the gravitational
force that propagates from one object to the other. Otherwise it is dicult to understand how
one mass knows of the mass, direction and distance of its partner in the gravitational force!
It is (currently) dened to be the gravitational force per unit mass or gravitational
acceleration produced at and associated with every point in space by a single massive
object. This eld acts on any mass placed at that point and thereby exerts a force. Thus:
g(r) =
GM
r
2
r (1006)
F
m
(r) = mg(r) =
GMm
r
2
r (1007)
Important true facts about the gravitational eld:
The gravitational eld produced by a (thin) spherically symmetric shell of mass M
vanishes inside the shell.
202
Wikipedia: http://www.wikipedia.org/wiki/Galileo.
203
Wikipedia: http://www.wikipedia.org/wiki/Newton.
204
Wikipedia: http://www.wikipedia.org/wiki/Descartes.
205
Wikipedia: http://www.wikipedia.org/wiki/Cavendish.
The gravitational eld produced by this same shell equals the usual
g(r) =
GM
r
2
r (1008)
outside of the shell. As a consequence the eld outside of any spherically symmetric
distribution of mass is just
g(r) =
GM
r
2
r (1009)
These two results can be proven by direct integration or by using Gausss Law for the gravi-
tational eld (using methodology developed next semester for the electrostatic eld).
The gravitational force is conservative. The gravitational potential energy of mass m in the
eld of mass M is:
U
m
(r) =
_
r
F d
=
GMm
r
(1010)
By convention, the zero of gravitational potential energy is at r
0
= (in all directions).
The gravitational potential is to the potenial energy as the gravitational eld is to the force.
That is:
V (r) =
U
m
(r)
m
=
_
r
g d
=
GM
r
(1011)
It as a scalar eld that depends only on distance, it is the simplest of the ways to describe
gravitation. Once the potential is known, one can always nd the gravitational potential
energy:
U
m
(r) = mV (r) (1012)
or the gravitational eld:
g(r) =
V (r) (1013)
or the gravitational force:
F
m
(r) = m
V (r) = mg(r) (1014)

Escape velocity is the minimum velocity required to escape from the surface of a planet (or
other astronomical body) and coast in free-fall all the way to innity so that the object arrives
at innity at rest. Since U() = 0 by denition, the escape energy for a particle is:
E
escape
= K() +U() = 0 + 0 = 0 (1015)
Since mechanical energy is conserved moving through the (presumed) vacuum of space, the
total energy must be zero on the surface of the planet as well, or:
1
2
mv
2
e

GMm
R
= 0 (1016)
or
v
e
=
_
2GM
R
(1017)
On the earth:
v
e
=
_
2GM
R
=
_
2gR
e
= 11.2 10
3
meters/second (1018)
(11.2 kilometers per second). This is also the most reasonable starting estimate for the speed
with which falling astronomical objects, e.g. meteors or asteroids, will strike the earth. A
large falling mass loses basically all of its kinetic energy on impact, so that even a fairly small
asteroid can easily strike with an explosive power greater than that of a nuclear bomb, or
many nuclear bombs. It is believed that just such a collision was responsible for at least the
nal Cretaceous extinction event that brought an end to the age of the dinosaurs some sixty
million years ago, and similar collisions may have caused other great extinctions as well.
A (point-like) object in a plane orbit has a kinetic energy that can be written as:
K = K
rot
+K
r
=
L
2
2mr
2
+
1
2
mv
2
r
(1019)
The total mechanical energy of this object is thus:
E = K +U =
1
2
mv
2
r
+
L
2
2mr
2

GMm
r
(1020)
L for an orbit (in a central force, recall) is constant, hence L

2
is constant in this expression.
The total energy and the angular momentum thus become convenient ways to parameterize
the orbit.
The eective potential energy is of a mass m in an orbit with (magnitude of) angular
momentum L is:
U
(r) =
L
2
2mr
2

GMm
r
(1021)
and the total energy can be written in terms of the radial kinetic energy only as:
E =
1
2
mv
2
r
+U
(r) (1022)
This is a convenient form to use to make energy diagrams and determine the radial turning
points of an orbit, and permits us to easily classify orbits not only as ellipses but as general
conic sections. The term L
2
/2mr
2
is called the angular momentum barrier because
its negative derivative with respect to r can be interpreted as a strongly (radially) repulsive
pseudoforce for small r.
The orbit classications (for a given nonzero L) are:
Circular: Minimum energy, only one permitted value of r
c
in the energy diagram where
E = U
(r
c
).
Elliptical: Negative energy, always have two turning points.
Parabolic: Marginally unbound, E = 0, one radial turning point. This is the escape
orbit described above.
Hyperbolic: Unbound, E > 0, one radial turning point. This orbit has enough energy to
reach innity while still moving, if you like, although a better way to think of it is that
its asymptotic radial kinetic energy is greater than zero.
12.1: Cosmological Models
S
S
m
E
m
stars
stars
(far away)
Planets
epicycles
orbits
E
Ptolomeic (terricentric epicycles) Copernican (heliocentric orbits)
Figure 140: The Ptolemaic geocentric model with epicycles that suced to explain the observa-
tional data of retrograde motion. The Copernican geocentric model also explained the data and
was somewhat simpler. To determine which was correct required the use of parallax to determine
distances as well as angles.
Early western (Greek) cosmology was both geocentric, with xed stars lamps or windows
on a big solid bowl, the moon and sun and planets orbiting a xed, stationary Earth in the center.
Plato represented the Earth (approximately correctly) as a sphere and located it at the center of
the Universe. Astronomical objects were located on transparent spheres (or circles) that rotated
uniformly around the Earth at dierential rates. Euxodus and then Aristotle (both students of
Plato) elaborated on Platos original highly idealized description, adding spheres until the model
worked to some extent, but left a number of phenomena either unexplained or (in the case of e.g.
lunar phases) not particularly believably explained.
The principle failure of the Aristotelian geocentric model is that it fails to explain retrograde
motion of the planets, where for a time they seem to go backwards against the xed stars in
their general orbits. However, in the second century Claudius Ptolemaeus constructed a somewhat
simpler geocentric model that is currently known as the Ptolemaic model that still involved Platos
circular orbits with stars embedded on an outer revolving sphere, but added to this the notion of
epicycles planets orbiting in circles around a point that was itself in a circular orbit around the
Earth. The model was very complex, but it actually explained the observational data including
retrograde motion well enough that for a variety of political, psychological, and religious reasons
it was adopted as the ocial cosmology of Western Civilization, endorsed and turned
into canonical dogma by the Catholic Church as geocentrism agreed (more or less) with the
cosmological assertions of the Bible.
In this original period during which the Greeks invented things like mathematics and philosophy
and the earliest rudiments of physics geocentrism was not the only model. The Pythogoreans, for
example, postulated that the earth orbited a great circle of re that was always beneath ones feet
in a at-earth model, while the sun, stars, moon and so on orbited the whole thing. An anti-Earth
was supposed to orbit on the far side of the great re, where we cannot see it. All one can say is gee,
they must have had really good recreational/religious hallucinogenic drugs back then...
206
. Another
206
Which in fact, they did...
out there model by the standards of the day was the heliocentric model.
The rst person known to have proposed a heliocentric system, however, was Aristarchus of
Samos (c. 270 BC). Like Eratosthenes, Aristarchus calculated the size of the Earth, and measured
the size and distance of the Moon and Sun, in a treatise which has survived. From his estimates,
he concluded that the Sun was six to seven times wider than the Earth and thus hundreds of times
more voluminous. His writings on the heliocentric system are lost, but some information is known
from surviving descriptions and critical commentary by his contemporaries, such as Archimedes.
Some have suggested that his calculation of the relative size of the Earth and Sun led Aristarchus
to conclude that it made more sense for the Earth to be moving than for the huge Sun to be moving
around it.
Archimedes was familiar with, and apparently endorsed, this model. This model explained the
lack of motion of the stars by putting them very far away so that distances to them could not
easily be detected using parallax! This was the rst hint that the Universe was much larger than
geocentric models assumed, which eliminated any need for parallax by approximately xing the
earth itself relative to the stars.
The heliocentric model explained may things, but it wasnt clear how it would explain (in par-
ticular) retrograde motion. For a variety of reason (mostly political and religious) the platonic
geocentric model was preserved and the heliocentric model ocially forgotten and ignored until the
early 1500s, when a catholic priest and polymath
207
resurrected it and showed how it explained
retrograde motion with far less complexity than the Ptolemaic model. Since the work of Aristarchus
was long forgotten, this reborn heliocentric model was called the Copernican model
208
, and was
perhaps the spark that lit the early Enlightenment
209
.
Initially, the Copernican model, published in 1543 by a Copernicus who was literally on his
deathbed, attracted little attention. Over the next 70 years, however, it gradually caused more and
more debate, in no little part because it directly contradicted a number of passages in the Christian
holy scriptures and thereby strengthened the position of an increasing number of contemporary
philosophers who challenged the divine inspiration and delity of those writings. This drew attention
from scholars within the established Catholic church as well as from the new Protestant churches
that were starting to emerge, as well as from other philosophers.
The most important of these philosophers was another polymath by the name of Galileo Galilei
210
. The rst refracting telescopes were built by spectacle makers in the Netherlands in 1608; Galileo
heard of the invention in 1609 and immediately built one of his own that had a magnication of
around 20. With this instrument (and successors also of his own design) he performed an amazing
series of astronomical observations that permitted him to empirically support the Copernican model
in preference over the Ptolemaic model.
It is important to note well that both models explain the observations available to the naked eye.
Ptolemaeus model was somewhat more complex than the Copernican model (which weighs against
it) but one common early complaint against the latter was that it wasnt provable by observation
and all of the sages and holy fathers of the church for nealy 2000 years considered geocentrism to
207
One who is skilled at many philosophical disciplines. Copernicus made contributions to astronomy, mathematics,
medicine, economics, spoke four languages, and had a doctorate in law.
208
Wikipedia: http://www.wikipedia.org/wiki/Copernican heliocentrism.
209
Wikipedia: http://www.wikipedia.org/wiki/Age of Enlightenment. The Enlightenment was the philosophical rev-
olution that led to the invention of physics and calculus as the core of natural philosophy what we now call science
as well as economics, democracy, the concept of human rights (including racial and sexual equality) within a va-
riety of social models, and to the rejection of scriptural theism as a means to knowledge that had its roots in the
discoveries of Columbus (that the world was not at), Descartes (who invented analytic geometry), Copernicus (who
proposed that the non-at Earth was not the center of creation after all), setting the stage in the sixteenth century
for radical and rapid change in the seventeenth and eighteenth centuries.
210
Wikipedia: http://www.wikipedia.org/wiki/Galileo Galilei. It would take too long to recite all of Galileos dis-
coveries and theories, but Galileo has for good reason been called The Father of Modern Science.
be true on observational grounds.
Galileos telescope which was little more powerful than an ordinary pair of hand-held binoculars
today was sucient to provide that proof. Galileos instrument clearly revealed that the moon
was a planetoid object, a truly massive ball of rock that orbited the Earth, so large that it had its
own mountains and seas. It revealed that Jupiter had not one, but four similar moons of its own
that orbited it in similar manner (moons named The Galilean Moons in his honor). He observed
the phases of Venus as it orbited the sun, and correctly interpreted this as positive evidence that
Venus, too, was a huge world orbiting the sun as the Earth orbits the sun while revolving and being
orbited by its own moon. He was one of the rst individuals in modern times to observe sunspots
(although he incorrectly interpreted them as Mercury in transit across the Sun) and set the stage for
centuries of solar astronomical observations and sunspot counts that date from roughly this time.
His (independent) observations on gravity even helped inspire Newton to develop gravity as the
universal cause of the observed orbital motions.
However, the publication of his own observations defending Copernicus corresponded almost
exactly with the Church nally taking action to condemn the work of Copernicus and ban his
book describing the model. In 1600 the Roman Inquisition had found Catholic priest, freethinker,
and philosopher Giordano Bruno
211
guilty of heresy and burned him at the stake, establishing a
dangerous precedent that put a damper on the development of science everywhere that the Roman
church held sway.
Bruno not only embraced the Copernican theory, he went far beyond it, recognizing that the Sun
is a star like other stars, that there were far, far more stars than the human eye could see without
help, and he even asserted that many of those stars have planets like the Earth and that those planets
were likely to be inhabited by intelligent beings. While Galileo was aided in his assertions by the use
of the telescope, Brunos were all the more remarkable because they preceded the invention of the
telescope. Note well that the human eye can only make out some 3500 stars altogether unaided
on the darkest, clearest nights. This leap from 3500 to innity, and the other inferences he made
to accompany them, were quite extraordinary. His guess that the stars are eectively numberless
was validated shortly afterwards by means of the very rst telescopes, which revealed more and
more stars in the gaps between the visible stars as the power of the telescopes was systematically
increased.
We only discovered positive evidence of the rst conrmed exoplanet
212
in 1988 and are still
in the process of searching for evidence that might yet validate his further hypothesis of life spread
throughout the Universe, some of it (other than our own) intelligent. Galileo had written a letter
to Kepler in 1597, a mere three years before Brunos ritualized murder, stating his belief in the
Copernican system (which was not, however, the direct cause of Brunos conviction for heresy). The
stakes were indeed high, and piled higher still with wood.
Against this background, Galileo developed a careful and observationally supported argument
in favor of the Copernican model and began cautiously to publish it within the limited circles of
philosophical discourse available at the time, proposing it as a theory only, but arguing that it
did not contradict the Bible. This nally attracted the attention of the church. Cardinal and Saint
Robert Bellarmine wrote a famous letter to Galileo in 1615
213
explaining the Churchs position on
the matter. This letter should be required reading for all students, and since if you are reading this
textbook you are, in a manner of speaking, my student, please indulge me by taking a moment and
following the link to read the letter and some of the commentary following.
In it Bellarmine makes the following points:
211
Wikipedia: http://www.wikipedia.org/wiki/Giordano Bruno. Bruno is, sadly, almost unknown as a philosopher
and early scientist for all that he was braver and more honest in his martyrdom that Galileo in his capitulation.
212
Wikipedia: http://www.wikipedia.org/wiki/Extrasolar planet. As of today, some 851 planets in 670 systems have
been discovered, with more being discovered almost every day using a dazzling array of sophisticated techniques.
213
http://www.fordham.edu/halsall/mod/1615bellarmine-letter.asp
If Copernicus (and Galileo, defending Copernicus and advancing the theory in his own right)
are correct, the heliocentric model is a very dangerous thing, not only by irritating all the
philosophers and scholastic theologians, but also by injuring our holy faith and rendering the
Holy Scriptures false.
In other words, if Galileo is correct, the holy scriptures are incorrect. Bellarmine correctly
infers that this would reduce the degree of belief in the infallibility of the holy scriptures and
hence the entire basis of belief in the religion they describe.
Furthermore, Bellarmine continues, Galileo is disagreeing with established authorities with his
hypothesis, who ...all agree in explaining literally (ad litteram) that the sun is in the heavens
and moves swiftly around the earth, and that the earth is far from the heavens and stands
immobile in the center of the universe. Now consider whether in all prudence the Church could
encourage giving to Scripture a sense contrary to the holy Fathers and all the Latin and Greek
commentators. Nor may it be answered that this is not a matter of faith, for if it is not a
matter of faith from the point of view of the subject matter, it is on the part of the ones who
have spoken.
Finally, Bellarmine concludes that if there were a true demonstration that the sun was in
the center of the universe and the earth in the third sphere, and that the sun did not travel
around the earth but the earth circled the sun, then it would be necessary to proceed with
great caution in explaining the passages of Scripture which seemed contrary, and we would
rather have to say that we did not understand them than to say that something was false which
has been demonstrated. He goes on to assert that the words the sun also riseth and the sun
goeth down, and hasteneth to the place where he ariseth, etc. were those of Solomon, who
not only spoke by divine inspiration but was a man wise above all others and most learned in
human sciences and in the knowledge of all created things, and his wisdom was from God.
Interested students are invited to play Logical Fallacy Bingo
214
with the text of the entire doc-
ument. Opinion as fact, appeal to consequences, wishful thinking, appeal to tradition, historians
fallacy, argumentum ad populum, thought-terminating cliche, and more. The argument of Bel-
larmine boils down to the following:
If the heliocentric model is true, the Bible is false where that model contradicts it.
If the Bible is false anywhere, it cannot be trusted everywhere and Christianity itself can
legitimately be doubted.
The Bible and Christianity are true. Even if they appear to be false they are still true, but
dont worry, they dont even appear to be false.
Therefore, while it is all very well to show how a heliocentric model could mathematically, or
hypothetically explain the observational data, it must be false.
In 1633, this same Bellarmine (later made into a saint of the church) prosecuted Galileo in the
Inquisition. Galileo was found vehemently suspect of heresy for precisely the reasons laid out in
Bellarmines original letter to Galileo. He was forced to publicly recant, his book laying out the
reasons for believing the Copernican model was added along with the book of Copernicus to the
list of banned books, and he was sentenced to live out his life under house arrest, praying all day
for forgiveness. He died in 1642 a broken man, his prodigious and productive mind silenced by the
active defenses of the locally dominant religious mythology for almost ten years.
I was fortunate enough to be teaching gravitation in the classroom on October 31, 1992, when
Pope John Paul II (nally) publicly apologized for how the entire Galileo aair was handled. On
214
http://lifesnow.com/bingo/ http://lifesnow.com/bingo/
Galileos behalf, I accepted the apology, but of course I must also point out that Bellarmines
argument is essentially correct. The conclusions of modern science have, almost without exception,
contradicted the assertions made in the holy scriptures not just of Christianity but of all faiths.
They therefore stand as direct evidence that those scriptures are not, in fact, divinely inspired or
perfect truth, at least where we can check them. While this does not prove that they are incorrect
in other claims made elsewhere, it certainly and legitimately makes them less plausible.
12.2: Keplers Laws
Galileo was not, in fact, the person who made the greatest contributions to the rejection of the
Ptolemaic model as the rst step towards rst the (better) heliocentric Copernican model, then to
the invention of physics and science as a systematic methodology for successively improving our
beliefs about the Universe that does not depend on authority or scripture. He wasnt even one of
the top two. Lets put him in the third position and count up to number one.
The person in the second position (in my opinion, anyway) was Tycho Brahe
215
, a wealthy Danish
nobleman who in 1571, upon the death of his father, established an observatory and laboratory
equipped with the most modern of contemporary instrumentation in an abbey near his ancestral
castle. He then proceeded to spend a substantial fraction of his life, including countless long Danish
winter nights, making and recording systematic observations of the night sky!
His observations bore almost immediate fruit. In 1572 he observed a supernova in the constella-
tion Cassiopeia. This one observation refuted a major tenet of Aristotelian and Church philosophy
that the Universe beyond the Moons orbit was immutable. A new star had appeared where none
was observed before. However, his most important contributions were immense tables of very precise
measurements of the locations of objects visible in the night sky, over time. This was in no small
part because his own hybrid model for a mixture of Copernican and Ptolemaic motion proved utterly
incorrect.
If you are a wealthy nobleman with a hobby who is generating a huge pile of data but who also
has no particular mathematical skill, what are you going to do? You hire a lab rat, a unky, an
assistant who can do the annoying and tedious work of analyzing your data while you continue to
have the pleasure of accumulating still more. And as has been the case many a time, the servant
exceeds the master. The number one philosopher who contributed to the Copernican revolution,
more important than Brahe, Bruno, Galileo, or indeed any natural philosopher before Newton was
Brahes assistant, Johannes Kepler
216
.
Kepler was a brilliant young man who sought geometric order in the motions of the stars and
planets. He was also a protestant living surrounded by Catholics in predominantly Catholic central
Europe and was persecuted for his religious beliefs, which had a distinctly negative impact on his
professional career. In 1600 he came to the attention of Tycho Brahe, who was building a new
observatory near Prague. Brahe was impressed with the young man, and gave him access to his
closely guarded data on the orbit of Mars and attempted to recruit him to work for him. Although he
was was trying hard to be appointed as the mathematician of Archiduke Ferdinand, his religious and
political alations worked against him and he was forced to ee from Graz to Prague in 1601, where
Brahe supported him for a full year until Brahes untimely death (either from possibly deliberate
mercury poisoning or a bladder that ruptured from enforced continence at a state banquet it isnt
clear which even today). With Brahes support, Kepler was appointed an Imperial mathematician
and inherited at least the use of Brahes voluminous data. For the next eleven years he put it to
very good use.
Although he was largely ignored by contemporaries Galileo and Descartes, Keplers work laid, as
215
Wikipedia: http://www.wikipedia.org/wiki/Tycho Brahe.
216
Wikipedia: http://www.wikipedia.org/wiki/Johannes Kepler.
we shall see, the foundation upon which one Isaac Newton built his physics. That foundation can
be summarized in Keplers Laws describing the motion of the orbiting objects of the solar system.
They were observational laws, propounded on the basis of careful analysis of the Brahe data and
further observations to verify them. Newton was able to derive trajectories that rather precisely
agreed with Keplers Laws on the basis of his physics and law of gravitation.
The laws themselves are surprisingly simple and geometric:
a) Planets move around the Sun in elliptical orbits with the Sun at one focus (see next section
for a review of ellipses).
b) Planets sweep out equal areas in equal times as they orbit the Sun.
c) The mean radius of a planetary orbit (in particular, the semimajor axis of the ellipse) cubed
is directly proportional to the period of the planetary orbit squared, with the same constant
of proportionality for all of the planets.
The rst law can be proven directly from Newtons Law of Gravitation (although we will not
prove it in this course, as the proof is mathematically involved). Instead we will content ourselves
with the observation that a circular orbit is certainly consistent, and by using energy diagrams
we will see that elliptical orbits are at least rather plausible. The second law will turn out to be
equivalent to the conservation of angular momentum of the orbits, because gravitation is a
central force and exerts no torque. The third, again, is dicult to formally prove for elliptical
orbits but straightforward to verify for circular orbits.
Since most planets have nearly circular orbits, we will not go far astray by idealizing and re-
stricting our analysis of orbits to the circular case. After all, not even elliptical orbits are precisely
correct, because Keplers results and Newtons demonstration ignore the inuence of the planets on
each other as they orbit the Sun, which constantly perturb even elliptical orbits so that they are at
best a not-quite-constant approximation. The best one can do is directly and numerically integrate
the equations of motion for the entire solar system (which can now be done to quite high precision)
but even that eventually fails as small errors from ignored factors accumulate in time.
Nevertheless, the path from Ptolemy to Copernicus, Galileo and Kepler to Newton stands out
as a great triumph in the intellectual and philosophical development of the human species. It is for
that reason that we study it.
12.2.1: Ellipses and Conic Sections
The following is a short review of the properties of ellipses (and, to a lesser extent, the other conic
sections). Recall that a conic section is the intersection of a plane with a right circular cone aligned
with (say) the z-axis, where the intersecting plane can intercept at any value of z and parallel,
perpendicular, or at an angle to the x-y plane.
A circle is the intersection of the cone with a plane parallel to the x-y plane. An ellipse is the
intersection of the cone with a plane tipped at an angle less than the angle of the cone with the
cone. A parabola is the intersection of the cone with a plane at the same angle as that of the cone.
A hyperbola is the intersection of the cone with a plane tipped at a greater angle than that of the
cone, so that it produces two disjoint curves and has asymptotes. An example of each is drawn in
gure 141, the hyperbola for the special case where the intersecting plane is parallel to the z-axis.
Properly speaking, gravitational two-body orbits are conic sections: hyperbolas, parabolas, el-
lipses, or circles, not just ellipses per se. However, bound planetary orbits are elliptical, so we will
concentrate on that.
ellipse
circle
parabola
hyperbola
Figure 141: The various conic sections. Note that a circle is really just a special case of the ellipse.
a
b
f f
P
Figure 142:
Figure 142 illustrates the general geometry of the ellipse in the x-y plane drawn such that its
major axis is aligned with the x axis. In this simple case the equation of the ellipse can be written:
x
2
a
2
+
y
2
b
2
= 1 (1023)
There are certain terms you should recall that describe the ellipse. The major axis is the longest
diameter, the one that contains both foci and the center of the ellipse. The minor axis is the
shortest diameter and is at right angles to the major axis. The semimajor axis is the long-direction
radius (half the major axis); the semiminor axis is the short-direction radius (half the minor
axis).
In the equation and gure above, a is the semimajor axis and b is the semiminor axis.
Not all ellipses have major/minor axes that can be easily chosen to be x and y coordinates.
Another general parameterization of an ellipse that is useful to us is a parametric cartesian repre-
sentation:
x(t) = x
0
+a cos(t +
x
) (1024)
y(t) = y
0
+b cos(t +
y
) (1025)
This equation will describe any ellipse centered on (x
0
, y
0
) by varying t from 0 to 2. Adjusting
the phase angles
x
and
y
and amplitudes a and b vary the orientation and eccentricity of the
ellipse from a straight line at arbitrary angle to a circle.
The foci of an ellipse are dened by the property that the sum of the distances from the foci
to every point on an ellipse is a constant (so an ellipse can be drawn with a loop of string and two
thumbtacks at the foci). If f is the distance of the foci from the origin, then the sum of the distances
must be 2d = (f + a) + (a f) = 2a (from the point x = a, y = 0. Also, a
2
= f
2
+ b
2
(from the
point x = 0, y = b). So f =
a
2
b
2
where by convention a b.
This is all you need to know (really more than you need to know) about ellipses in order to
understand Keplers First and Third Laws. The key things to understand are the meanings of the
terms focus of an ellipse (because the Sun is located at one of the foci of an elliptical orbit)
and semimajor axis as a measure of the average radius of a periodic elliptical orbit. As noted
above, we will concentrate in this course on circular orbits because they are easy to solve for and
understand, but in future, more advanced physics courses students will actually solve the equations
of motion in 2 dimensions (the third being irrelevant) for planetary motion using Newtons Law
of Gravitation as the force and prove that the solutions are parametrically described ellipses. In
some versions of even this course, students might use a tool such as octave, mathematica, or matlab
to solve the equations of motion numerically and graph the resulting orbits for a variety of initial
conditions.
12.3: Newtons Law of Gravitation
In spite of the churchs opposition, the early seventeenth century saw the formal development of the
heliocentric hypothesis, supported by Keplers empirical laws. Instrumentation improved, and the
geometric methods involving parallax to determine distance produced a systematically improving
picture of the solar system that was not only heliocentric but veried Keplers Laws in detail for
additional planetary bodies. The debate with the geocentric/ptolemaic model supporters continued,
but in countries far away from Rome where its inuence waned, a consensus was gradually forming
that the geocentric hypothesis was incorrect. The observations of Brahe and Galileo and analysis of
Kepler was compelling.
However, the cause of heliocentric motion was a mystery. There was clearly substantial geometry
and order in the motion of the planets, although it was not precisely the geometry proposed by Plato
and advanced by Aristotle and Ptolemaeus and others. This geometry was subtle, and best described
within the connes of the new Analytic Geometry invented by Descartes
217
where ellipses (as we
can see above) were not just conic sections or objects visualized in a solid geometry: They could
be represented by equations.
Descartes was another advocate of the heliocentric theory, but when, in 1633, he heard that
Galileo had been condemned for his advocacy of Copernicus and arguments against the Ptolemaic
geocentric model, he abruptly changed his mind about publishing a work to that eect! As noted
above, these were dangerous times for freethinking philosophers who were literally forbidden by the
rulers of the predominant religion under threat of torture and murder from speculating in ways that
contradicted the scriptures of that religion. A powerful voice was thus silenced and the geocentric
model persisted without any open challenge for fty more years.
So things remained until one of the most brilliant and revered men of all time came along: Isaac
Newton. Born on December 25, 1642, Newton was only 8 in 1650 when Descartes died, but he was
taught Descartes geometry at Cambridge (before it closed in the midst of a bout of the plague
so that he was sent home for a while) and by the age of 24 had transformed it into a theory of
uxions the rst rudimentary description of calculus. Calculus, or the mathematics of related
217
Wikipedia: http://www.wikipedia.org/wiki/Rene Descartes. Descartes was another of the renaissance man
polymaths of the age. He was brilliant and led a most interesting life, making contributions to mathematics (where
Cartesian Coordinates are named in his honor), physics, and philosophy. He reportedly liked to sleep late, never
rising before 11 a.m., and when an opportunity to become a court mathematician and tutor arose that forced him to
change his habits and arise at 5 a.m. every day, he sickened and died (in 1650) a short while thereafter!
rates of change established on top of a coordinatized geometry, was the missing ingredient, the key
piece needed to transform the strictly geometric observations of philosophers from Plato through
Kepler into an analytic description of both the causes and eects of motion.
Even so, Newton worked thirteen more years producing and presenting advances in mathematics,
optics, and alchemy before (in 1679), having recently completed a speculative theory of optics, he
turned his attention wholly towards the problem of celestial mechanics and Keplers Laws. In this
he was reportedly inspired by the intuition that the force of gravity the same force that makes the
proverbial apple fall from the tree was responsible for holding the moon in its orbit around the
Earth.
Initially he corresponded heavily with Robert Hooke
218
, known to us through Hookes Law in
the text above, who had been appointed secretary of the brand new Royal Society
219
, the worlds
rst ocial scientic organization, devoted to an eclectic mix of mathematics, philosophy, and
the brand new natural philosophy (the correct and common termin for science almost to the
end of the nineteenth century). Hooke later claimed (quite possibly correctly) that he suggested
the inverse-square force law to Newton, but what Hooke did not do that Newton did is to take the
postulated inverse square force law, add to it a set of axioms (Newtons Laws) that dened force in
a particular mathematical way, and then show that the equations of motion that followed from an
inverse square force law, evaluated through the use of calculus, completely predicted and explained
Keplers Laws and more by means of explicit functional solutions built on top of Descartes analytic
geometry, where the more was the apparent non-elliptical orbits of other celestial bodies, notably
comets.
It is dicult to properly explain how revolutionary, how world-shattering this combination of
invention and discovery was. Initially it was communicated privately to the Royal Society itself in
1684; three years later it was formally published as the Philosophiae Naturalis Principia Mathemat-
ica
220
, or The Mathematical Principles of Natural Philosophy. This book changed everything.
It utterly destroyed, forever, any possibility that the geocentric hypothesis was correct. The reader
must determine for themselves if it initiated the very process anticipated and feared by Robert Bel-
larmine as the consequences of Newtons work unfolded, they have proven the Bible and all of the
other religious mythologies and scriptures of the world literally false time and again.
As we have seen from a full semester of work with its core principles, Newtons Laws and a small
set of actual force laws permit the nearly full description and prediction of virtually all everyday
mechanical phenomena, and its ideas (in some cases extended far beyond what Newton originally
anticipated) survive to some extent even in its eventual replacement, quantum mechanics. Principia
Mathematica laid down a template for the process of scientic endeavor a mix of accumulation
and analysis of experimental data, formal axiomatic mathematics, and analytic reasoning leading to
a detailed description of the visible Universe of ever-improving consistency. It was truly a system
of the world, the basis of the scientic worldview. It was a radically dierent worldview than
the one based on faith, authority, and the threat of violence divine or mundane to any that dared
challenge it that preceded it.
Let us take a look at the force law invented or discovered (as you please) by Newton and see
how it works to explain Keplers Laws, at least for simple cases we can readily solve without much
calculus.
Here are Newtons axioms, the essential individual assumptions that are assembled compactly
into the law of gravitation. Note that these assumptions were initially applied to objects like the
Sun and the planets and moons that are spherically symmetric to a close approximation; the also
apply to particles of mass or chunks of mass small enough to be treated as particles. Following
along with gure 143 above:
218
Wikipedia: http://www.wikipedia.org/wiki/Robert Hooke.
219
Wikipedia: http://www.wikipedia.org/wiki/Royal Society.
220
Wikipedia: http://www.wikipedia.org/wiki/Philosophiae Naturalis Principia Mathematica.
r
F
M
m
21
1
2
Figure 143:
a) The force of gravity is a two body force and does not change if three or more bodies are
present.
b) The force of gravity is action at a distance and does not require the two objects to touch
in order to act.
c) The force of gravity acts along (in the direction of) a line joining centers of spherically
symmetric masses, in this case along r.
d) The force of gravity is attractive.
e) The force of gravity is proportional to each mass.
f) The force of gravity is inversely proportional to the distance between the centers of
the masses.
We will add to this list the assumption that one of the two masses is much larger than the other so
that the center of mass and the center of coordinates can both be placed at the center of the larger
mass. This is not at all necessary and proper treatments dating all the way back to Newton account
for motion around a more general center of mass, but for us it will greatly simplify our pictures and
treatments if we idealize in this way and in the case of systems like the Earth and the moon, or the
Sun and the Earth, it isnt a terrible idealization. The Suns mass is a thousand times larger than
even that of Jupiter!
These axioms are rather prolix in words, but in the form of an algebraic equation they are rather
beautiful :
F
21
=
G M
1
m
2
r
2
r (1026)
where G = 6.6710
11
N-m
2
/kg
2
is the textbfuniversal gravitational constant, added as the constant
of proportionality that establishes the connections between all of the dierent units in question. Note
that we continue to use the convention that

F
21
stands for the force acting on mass 2 due to mass
1; the force

F
12
=
F
21
both from Newtons third law and because the force is attractive for both
masses.
Keplers rst law follow from solving Newtons laws and the equations of motion in three di-
mensions for this particular force law. Even though one dimension turns out to be irrelevant (the
motion is strictly in a plane), even though the motion turns out to have two constants of the motion
that permits it to be further simplied (the energy and the angular momentum) the actual solution
of the resulting dierential equations is a bit dicult and beyond the scope of this course. We will
instead show that circular orbits are one special solution that easily satisfy Keplers First and Third
Laws, while Keplers Second Law is a trivial consequence of conservation of angular momentum.
Let us begin with Keplers Second Law, as it stands alone (the other two proofs are related).
It is proven by observing that the force is radial, and hence exerts no torque. Thus the angular
momentum of a planetary orbit is constant!
dA = | r x vdt |
v t
r
Figure 144: The area swept out in an elliptical orbit in time t is shaded in the ellipse above.
We start by noting that the area enclosed by an parallelogram formed out of two vectors is the
magnitude of the the cross product of those vectors. Hence the area in the shaded triangle in gure
144 is half of that:
dA =
1
2
|r v dt| =
1
2
|r||v dt| sin (1027)
=
1
2m
|r mv dt| (1028)
If we divide the t over to the other side we get the area per unit time being swept out by the
orbit:
dA
dt
=
1
2m
|r p| =
1
2m
|
L| = a constant (1029)
because angular momentum is conserved for a central force (see the chapter/week on torque and
angular momentum if you have forgotten this argument) and Keplers second law is proved for this
force.
That was pretty easy! Lets reiterate the point of this demonstration:
Keplers Second Law is equivalent to the Law of Conservation of Angular
Momentum and is true for any central force (not just gravitation)!
The proofs of Keplers First and the Third laws for circular orbits rely on a common algebraic
argument, so we group them together. They key formula is, as one might expect the fact that if
an orbiting mass moves in a circular orbit, then the gravitational force has to be equal to the mass
times the centripetal acceleration:
G M
s
m
p
r
2
= m
p
a
r
= m
p
v
2
r
(1030)
where M
s
is the mass of the central attracting body (which we implicitly assume is much larger than
the mass of the orbiting body so that its center of mass is more or less at the center of mass of the
system), m
p
is the mass of the planet, v is its speed in its circular orbit of radius r. This situation
is illustrated in gure 145.
This equation in and of itself proves that Newtons Laws plus Newtons Law of Gravitation
have a solution consisting of a circular orbit, where a circle is a special case of an ellipse. This
proof isnt very exciting, however, as any attractive radial force law we might attempt would have
a similarly consistent circular solution. The kinematic radial acceleration of a particle moving in
uniform circular motion is independent of the particular force law that produces it!
What is a lot more interesting is the demonstration that the circular orbit satises Keplers
Third Law, as this law quite specically denes the relationship between the radius of the orbit
and its period. We can easily see that only one radial force law will lead to consistency with the
observational data for circular orbits.
r
2
F =
GMm
=
mv
2
r
S
E
M
m
r
F
v =
2 r
T
Figure 145: The geometry used to prove Keplers and Third Laws for a circular (approximately)
orbit like that of the Earth around the Sun.
We start by cancelling the mass of the planet and one of the factors of r:
v
2
=
G M
s
r
(1031)
But, v is related to r and the period T by:
v =
2r
T
(1032)
so that
v
2
=
4
2
r
2
T
2
=
G M
s
r
(1033)
Finally, we isolate the powers of r:
r
3
=
_
G M
s
4
2
_
T
2
(1034)
and Keplers third law is proved for circular orbits.
Since there is nothing unique about circular orbits and all closed elliptical orbits around the same
central attracting body have to have the same constant of proportionality, we have both proven that
Newtons Law of Gravitation has circular solutions that satisfy Keplers Third Law and we have
evaluated the universal constant of proportionality, valid for all of the planets in the solar system!
We can then write the law more compactly:
R
3
sm
=
_
G M
s
4
2
_
T
2
(1035)
where now R
sm
is the semimajor axis of the elliptical orbit, which happens to be r for a circular
orbit.
Note well that this constant is easily measured! In fact we can evaluate it from our knowledge of
the semimajor axis of Earths nearly circular orbit R
E
1.510
11
meters (150 million kilometers)
plus our knowledge of its period T = 3.153 10
7
seconds (1 year, in seconds). These two numbers
are well worth remembering the rst is called an astronomical unit and is one of the fundamental
lengths upon which our knowledge of the distances to the nearer stars is based; the second physicists
tend to remember as ten million times seconds per year because that is accurate to well within
one percent and easier to remember than 3.153.
Combining the two we get:
_
G M
s
4
2
_
=
T
2
R
3
sm
=

2
10
14
3.375 10
33
3 10
19
(1036)
where we used another physics geek cheat:
2
10, and then approximated 10/3.375 3 as well.
That way we can get an answer, good to within a couple of percent, without using a calculator or
looking anything up!
Note well! If only we knew G, wed know the mass of the Sun! If we use the same logic to
determine the same constant for objects orbiting the Earth (where we might use the semimajor
axis of the moons orbit, 384,000 kilometers, and the period of the moons orbit, 27.3 days, to get
GM
E
/4
2
) we would also be able to determine the mass of the Earth!
Of course we do know G now, but when Newton proposed his theory, it wasnt so easy to gure
out! This is because gravitation is the weakest of the forces of nature, by far! It is so weak that it is
remarkably dicult to measure the direct gravitational force between two objects of known masses
separated by a known distance in the laboratory, so that all of the quantities in Newtons Law of
Gravitation were measured but G.
In fact, it took over a century for Henry Cavendish
221
to build a clever apparatus that was
suciently sensitive that it could measure G from these three known quantities. This experiment
was said to weigh the Earth not because it actually did so far from it but because once G was
known experiments that had long since been done instantly gave us the mass of the Sun, the mass
of the Earth, the mass of Jupiter and Saturn and Mars (any planet where we can remotely observe
the semimajor axis and period of a moon) and much more.
These in turn gave us some serious conundrums! The Sun turns out to be 1.4 million kilometers
in diameter, and to have a mass of 2 10
30
kilograms! With a surface temperature of some 6000 K,
what mechanism keeps it so hot? Any sort of chemical re would soon burn out!
Laboratory experiments plus astronomical observations based on the use of parallax with the
entire diameter of the Earths orbit used as a triangle base and with exquisitely sensitive measure-
ments of the angles between the lines of sight to the nearer stars (which allowed us to determine
the distance to these stars) all analyzed by means of Newtons Laws (including gravitation), allowed
astronomers to rapidly infer a startling series of facts about the Solar system, our local galaxy (the
Milky Way), and the Earth.
Not only was the geocentric hypothesis wrong, so was the heliocentric hypothesis. The Earth
turned out to be a mostly unremarkable planet, a relatively small one of a rather large number
orbiting an entirely unremarkable star that itself was orbiting in a huge collection of stars, that was
only one of a truly staggering number of similar collections of stars, where every new generation of
telescopes revealed still more of everything, still further away. At the moment, there appear to be
on the order of a hundred billion galaxies, containing somewhere in the ballpark of 10
23
stars, in the
visible Universe, which is (allowing for its original ination, 13.7 billion years ago) around 46 billion
light years in radius. At least one method of estimation has claimed to establish a radius around
twice this large as a lower bound for its size (so that all of these estimates are probably low by an
order of magnitude) and there is no upper bound.
Exoplanets are being discovered at a rate that suggests that planetary systems around those stars
are common, not rare (especially so given that we can only see or infer the existence of extremely
large planets so far we would nd it almost impossible to detect a planet as small as the Earth).
Brunos original assertion that the Universe is innite, contains and innite number of stars, with
221
Wikipedia: http://www.wikipedia.org/wiki/Cavendish Experiment.
an innite number of planets, an innite number of which have some sort of intelligent or otherwise
life may be impossible to verify or refute, but innite or not the Universe is enormous compared to
the scale of the Solar system, which is huge compared to the scale of the Earth, and contains many,
many stars with many, many planetary systems.
In fact, the only thing about the Earth that is remarkable may turn out to be us!
12.4: The Gravitational Field
As noted above, Newton proposed the gravitational force as the cause of the observed orbital motions
of the celestial objects. However, this force was action at a distance it exists between two objects
that are not touching and that indeed are separated by nothing: a vacuum! What then, causes the
gravitational force itself? Let us suggest that there must be something that is produced by one
planet acting as a source that is present at the location of the other planet that is the proximate
cause of the force that planet experiences. We dene the gravitational eld to be this cause of
the gravitational force, the thing that is present at all points in space surrounding a mass whether
or not some other mass is present there to be acted on!
We dene the gravitational eld conveniently to be the force per unit mass, a quantity that has
the units of acceleration:
g(r) =
G M
r
2
r =
F
m
(1037)
The magnitude of the gravitational eld at the surface of the earth is thus:
g = g(R
E
) =
F
m
=
G M
E
R
2
E
(1038)
and we see that the quantity that we have been calling the gravitational acceleration is in fact more
properly called the near-Earth gravitational eld.
This is a very useful equation. It can be used to nd any one of g, R
E
, M
E
, or G, from a
knowledge of any of the other three, depending on which ones you think you know best. g is easy;
students typically measure g in physics labs at some point or another several dierent ways! R
E
is actually also easy to measure independently and some classical methods were used to do so long
before Columbus.
M
E
, however is hard! This is because it always appears in the company of G, so that knowing g
and R
E
only gives you their product. This turns out to be the case nearly everywhere any ordinary
measurement you might make turns out to tell you GM
E
together, not either one separately.
What about G?
To measure G in the laboratory, one needs a very sensitive apparatus for measuring forces. Since
we know already that G is on the order of 10
10
N-m
2
/kg
2
, we can see that gravitational forces
between kilogram-scale masses separated by ten centimeters or so are on the order of a few billionths
of a Newton.
Henry Cavendish made the rst direct measurement of G using a torsional pendulum basically
a barbell suspended by a very thin, strong thread and some really massive balls whose relative
position could be smoothly adjusted to bring them closer to and farter from the barbell balls. As
you can imagine, it takes very little torque to twist a long thread from its equilibrium angle to a new
one, so this apparatus has when utilized by someone with a great deal of patience, using a light
source and a mirror to further amplify the resolution of the twist angle proven to be suciently
sensitive to measure the tiny forces required to determine G, even to some reasonable precision.
Using this apparatus, he was able to nd G and hence to weigh the earth (nd M
E
). By mea-
suring as a function of the distance r measured between the centers of the balls, and calibrating
equilibrium position when
attracted by mass M
M
M
M
M
m
m
torsional pivot
equilibrium position (no mass M)
Figure 146: The apparatus associated with the Cavendish experiment, which established the rst
accurate estimates for G and thereby weighed the Earth, the Sun, and many of the other objects
we could see in the sky.
the torsional response of the string using known forces, he managed to get 6.754 (vs 6.673 currently
accepted) 10
11
N-m
2
/kg
2
. This is within just about one percent. Not bad!
12.4.1: Spheres, Shells, General Mass Distributions
So far, our empirically founded expression for gravitational force (and by inheritance, eld) applies
only to spherically symmetric mass distributions planets and stars, which are generally
almost perfectly round because of the gravitational eld or particles small enough that they can
be treated like spheres. Our pathway towards the gravitational eld of more general distributions
of mass starts by formulating the eld of a single point-like chunk of mass in such a distribution:
dg =
G dm
0
|r r
0
|
3
(r r
0
) (1039)
This equation can be integrated as usual over an arbitrary mass distribution using the usual
connection: The mass of each chunk is the mass per unit volume times the volume of the chunk, or
dm = dV
0
.
g =
_
G dV
0
|r r
0
|
3
(r r
0
) (1040)
where for example dV
0
= dx
0
dy
0
dz
0
(Cartesian) or dV
0
= r
2
0
sin(
0
)d
0
d
0
dr
0
(Sphereical Polar)
etc. This integral is not always easy, but it can generally be done very accurately, if necessary
numerically. In simple cases we can actually do the calculus and evaluate the integral.
In this part of this course, we will avoid doing the integral, although we will tackle many examples
of doing it in simple cases next semester. We will content ourselves with learning the following True
Facts about the gravitational eld:
The gravitational eld produced by a (thin) spherically symmetric shell of mass M vanishes
inside the shell.
The gravitational eld produced by this same shell equals the usual
g(r) =
GM
r
2
r (1041)
outside of the shell. As a consequence the eld outside of any spherically symmetric distribution
of mass is just
g(r) =
GM
r
2
r (1042)
These two results can be proven by direct integration or by using Gausss Law for the gravitational
eld (using methodology developed next semester for the electrostatic eld). The latter is so easy
that it is hardly worth the time to learn the former for this special case.
Note well the most important consequence for our purposes in the homework of this rule is that
when we descend a tunnel into a uniformly dense planet, the gravity will diminish as we are only
pulled down by the mass inside our radius. This means that the gravitational eld we experience is:
g(r) =
GM(r)
r
2
r (1043)
where M(r) = 4r
3
/3 for a uniform density, something more complicated in cases where the density
itself changes with r. You will use this expression in several homework problems.
12.5: Gravitational Potential Energy
W
12
W
t
= 0
r
2
r
1
W
12 W
t
= 0
A
B
Figure 147: A crude illustration of how one can show the gravitational force to be conservative (so
that the work done by the force is independent of the path taken between two points), permitting
the evaluation of a potential energy function.
If you examine gure 147 above, and note that the force is always down along r, it is easy
to conclude that gravity must be a conservative force. Gravity produced by some (spherically
symmetric or point-like) mass does work on another mass only when that mass is moved in or
out along r connecting them; moving at right angles to this along a surface of constant radius r
involves no gravitational work. Any path between two points near the source can be broken up into
approximating segments parallel to r and perpendicular to r at each point, and one can make the
approximation as good as you like by choosing small enough segments.
This permits us to easily compute the gravitational potential energy as the negative work done
moving a mass m from a reference position r
0
to a nal position r:
U(r) =
_
r
r
0
F dr (1044)
=
_
r
r
0
GMm
r
2
dr (1045)
= (
GMm
r

GMm
r
0
) (1046)
=
GMm
r
+
GMm
r
0
(1047)
Note that the potential energy function depends only on the scalar magnitude of r
0
and r, and
that r
0
is in the end the radius of an arbitrary point where we dene the potential energy to be zero.
By convention, unless there is a good reason to choose otherwise, we require the zero of the
gravitational potential energy function to be at r
0
= . Thus:
U(r) =
GMm
r
(1048)
Note that since energy in some sense is more fundamental than force (the latter is the negative
derivative of the former) we could just as easily have learned Newtons Law of Gravitation directly
as this scalar potential energy function and then evaluated the force by taking its negative gradient
(multidimensional derivative).
The most important thing to note about this function is that it is always negative. Recall that
the force points in the direction that the potential energy decreases most strongly in. Since U(r) is
negative and gets larger in magnitude for smaller r, gravitation (correctly) points down to smaller
r where the potential energy is smaller (more negative).
The potential energy function will be very useful to us when we wish to consider things like escape
velocity/energy, killer asteroids, energy diagrams, and orbits. Lets start with energy diagrams and
orbits.
12.6: Energy Diagrams and Orbits
Lets write the total energy of a particle moving in a gravitational eld in a clever way that isolates
the radial kinetic energy:
E
tot
=
1
2
mv
2
GMm
r
(1049)
=
1
2
mv
2
r
+
1
2
mv
2
t

GMm
r
(1050)
=
1
2
mv
2
r
+
1
2mr
2
(mv
t
r)
2
GMm
r
(1051)
=
1
2
mv
2
r
+
L
2
2mr
2

GMm
r
(1052)
=
1
2
mv
2
r
+U
e
(r) (1053)
In this equation,
1
2
mv
2
r
is the radial kinetic energy, and
U
e
(r) =
L
2
2mr
2

GMm
r
(1054)
is the radial potential energy plus the rotational kinetic energy of the orbiting particle, formed out
of the transverse velocity v
t
as K
rot
=
1
2
mv
2
t
= L
2
/2mr
2
. If we plot the eective potential (and its
pieces) we get a one-dimensional radial energy plot as illustrated in gure 148.
____
L
2
2
2mr
______ GMm
r
____
L
2
2
2mr
______ GMm
r
eff
,U
tot
E
U
eff
r
=
Figure 148: A typical energy diagram illustrating the eective potential energy, which is basically
the sum of the radial potential energy and the angular kinetic energy of the orbiting object.
By drawing a constant total energy on this plot, the dierence between E
tot
and U
e
(r) is the
radial kinetic energy, which must be positive. We can determine lots of interesting things from this
diagram.
In gure 149, we show orbits with a given xed angular momentum

L = 0 and four generic total
energies E
tot
. These orbits have the following characteristics and names:
a) E
tot
> 0. This is a hyperbolic orbit.
b) E
tot
= 0. This is a parabolic orbit. This orbit denes escape velocity as we shall see later.
c) E
tot
< 0. This is generally an elliptical orbit (consistent with Keplers First Law).
d) E
tot
= U
e,min
. This is a circular orbit. This is a special case of an elliptical orbit, but deserves
special mention.
Note well that all of the orbits are conic sections. This interesting geometric connection between
1/r
2
forces and conic section orbits was a tremendous motivation for important mathematical work
two or three hundred years ago.
12.7: Escape Velocity, Escape Energy
As we noted in the previous section, a particle has escape energy if and only if its total energy
is greater than or equal to zero, provided that we set the zero of potential energy at innity in the
rst place. We dene the escape velocity (a misnomer!) of the particle as the minimum speed (!)
that it must have to escape from its current gravitational eld typically that of a moon, or planet,
or star. Thus:
E
tot
= 0 =
1
2
mv
2
escape
GMm
r
(1055)
so that
v
escape
=
_
2GM
r
=
_
2gr (1056)
E , U
tot eff
E
tot
E
tot
E
tot
E
tot
E
k
E
k
E
k
< 0 (forbidden)
r
max
r
0
r
min
r
1
3
4
2
Figure 149: A radial total energy diagram illustrating the four distinct named orbits in terms of
their total energy: 1) is a hyperbolic orbit. 2) is a parabolic orbit. 3) is an elliptical orbit. 4)
is a circular orbit. Note that all of these orbits are conic sections, and that the classical elliptic
orbits have two radial turning points at the apogee and perigee along the major axis of the ellipse.
where in the last form g =
GM
r
2
(the magnitude of the gravitational eld see next item).
To escape from the Earths surface, one needs to start with a speed of:
v
escape
=
_
2GM
E
R
E
=
_
2gR
E
= 11.2 km/sec (1057)
Note: Recall the form derived by equating Newtons Law of Gravitation and mv
2
/r in an earlier
section for the velocity of a mass m in a circular orbit around a larger mass M:
v
2
circ
=
GM
r
(1058)
from which we see that v
escape
=
2v
circ
.)
It is often interesting to contemplate this reasoning in reverse. If we drop a rock onto the earth
from a state of rest far away (much farther than the radius of the earth, far enough away to be
considered innity), it will REACH the earth with escape (kinetic) energy and a total energy close
to zero. Since the earth is likely to be much larger than the rock, it will undergo an inelastic collision
and release nearly all its kinetic energy as heat. If the rock is small, this is not necessarily a
problem. If it is large say, 1 km and up it releases a lot of energy.
Example 12.7.1: How to Cause an Extinction Event
How much energy? Time to do an estimate, and in the process become just a tiny bit scared of a
very, very unlikely event that could conceivably cause the extinction of us.
Lets take a typical rocky asteroid that might at any time decide to drop in for a one-way
visit. While the asteroid might well have any shape that of a potato, or pikachu
222
, well follow
222
Wikipedia: http://www.wikipedia.org/wiki/Pikachu. If you dont already know, dont ask...
the usual lazy physicist route and assume that it is a simple spherical ball of rock with a radius r.
In this case we can estimate its total mass as a function of its size as:
M =
4
3
r
3
(1059)
Of course, now we need to estimate its density, . Here it helps to know two numbers: The
density of water, or ice, is around 10
3
kg/m
3
(a metric ton per cubic meter), and the specic
gravity or rock is highly variable, but in the ballpark of 2 to 10 (depending on how much of what
kinds of metals the rock might contain, for example), say around 5.
If we then let r 1000 meters (a bit over a mile in diameter), this works out to M 1.67 10
12
kg, or around 2 billion metric tons of rock, about the mass of a small mountain.
This mass will land on earth with escape velocity, 11.2 km/sec, if it falls in from rest from far
away. Or more, of course it may have started with velocity and energy from some other source
this is pretty much a minimum. As an exercise, compute the number of Joules this collision would
release to toast the dinosaurs or us! As a further exercise, convert the answer to tons of TNT
(a unit often used to describe nuclear-grade explosions the original nuclear ssion bombs had an
explosive power of around 20,000 tons of TNT, and the largest nuclear fusion bombs built during
the height of the cold war had an explosive power on the order of 1 to 15 million tons of TNT.
The conversion factor is 4.184 gigajoules per ton of TNT. You can easily do this by hand, although
the internet now boasts of calculators that will do the entire conversion for you. I get ballpark of ten
to the twentieth joules or 25 gigatons that is billions of tons of TNT. In contrast, wikipedia
currently lists the combined explosive power of all of the worlds 30,000 or so extant nuclear weapons
to be around 5 gigatons. The explosion of Tambora (see last chapter) was estimated to be around 1
gigaton. The asteroid that might have caused the K-T extinction event that ended the Cretaceous
and wiped out the dinosaurs and created the 180 kilometer in diameter Chicxulub crater
223
had
a diameter estimated at around 10 km and would have released around 1000 times as much energy,
between 25 and 100 teratons of TNT, the equivalent of some 25,000 Tamboras happening all at
once.
Such impacts are geologically rare, but obviously can have enormous eects on the climate and
environment. On a smaller scale, they are one very good reason to oppose the military exploitation
of space it is all too easy to attack any point on Earth by dropping rocks on it, where the asteroid
belt could provide a virtually unlimited supply of rocks.
12.8: Bridging the Gap: Coulombs Law and Electrostatics
This concludes our treatment of basic mechanics. Gravitation is our rst actual law of nature a
force or energy law that describes the way we think the Universe actually works at a fundamental
level.
Gravity is, as we have seen, important in the sense that we live gravitationally bound to the outer
surface of a planet that is itself gravitationally bound to a star that is gravitationally compressed
at its core to the extent that thermonuclear fusion keeps the entire star white hot over billions of
years, providing us with our primary source of usable energy. It is unimportant in the sense that it
is very weak, the weakest of all of the known forces.
Next, in the second volume of this book, you will study one of the strongest of the forces, the
one that dominates almost every aspect of your daily life. It is the force that binds atoms and
molecules together, mediates chemistry, permits the exchange of energy we call light, and indeed is
the fundamental source of nearly every of the forces we treated in this semester in collective form:
The electromagnetic interaction.
223
Wikipedia: http://www.wikipedia.org/wiki/Chicxulum Crater.
Just to whet your interest (and explain why we have spent so long on gravity when it is weak and
mostly irrelevant outside of its near-Earth form in everyday aairs) let is take note of Coulombs
Law, the force that governs the all-important electrostatic interaction that binds electrons to atomic
nuclei to make atoms, and binds atoms together to make molecules. It is the force that exists between
two charges, and can be written as:
F
12
=
k
e
q
1
q
2
r
2
12
r
12
(1060)
Hmmm, this equation looks rather familiar! It is almost identical to Newtons Law of Gravitation,
only it seems to involve the charge (q) of the particles involved, not their mass, and an electrostatic
constant k
e
instead of the gravitational constant G.
In fact, it is so similar that you instantly know lots of things about electrostatics from this one
equation, plus your knowledge of gravitation. You will, for example, learn about the electrostatic
eld, the electrostatic potential energy and potential, you will analyze circular orbits, you will analyze
trajectories of charged particles in uniform elds all pretty much the same idea (and algebra, and
calculus) as their gravitational counterparts.
The one really interesting thing you will learn in the rst couple of weeks is how to properly
describe the geometry of 1/r
2
force laws and their underlying elds a result called Gausss Law.
This law and the other Maxwell Equations will turn out to govern nearly everything you experience.
In some very fundamental sense, you are electromagnetism.
Good luck!
Problem 1.
Problem 2.
It is a horrible misconception that astronauts in orbit around the Earth are weightless, where
weight (recall) is a measure of the actual gravitational force exerted on an object. Suppose you are
in a space shuttle orbiting the Earth at a distance of two times the Earths radius (R
e
= 6.4 10
6
meters) from its center.
a) What is your weight relative to your weight on the Earths surface?
b) Does your weight depend on whether or not you are moving at a constant speed? Does it
depend on whether or not you are accelerating?
c) Why would you feel weightless inside an orbiting shuttle?
d) Can you feel as weightless as an astronaut on the space shuttle (however briey) in your
own dorm room? How?
Problem 3.
Physicists are working to understand dark matter, a phenomenological hypothesis invented to
explain the fact that things such as the orbital periods around the centers of galaxies cannot be
explained on the basis of estimates of Newtons Law of Gravitation using the total visible matter in
the galaxy (which works well for the mass we can see in planetary or stellar context). By adding
mass we cannot see until the orbital rates are explained, Newtons Law of Gravitation is preserved
(and so are its general relativistic equivalents).
However, there are alternative hypotheses, one of which is that Newtons Law of Gravitation
is wrong, deviating from a 1/r
2
force law at very large distances (but remaining a central force).
The orbits produced by such a 1/r
n
force law (with n = 2) would not be elliptical any more, and
r
3
= CT
2
but would they still sweep out equal areas in equal times? Explain.
Problem 4.
r
R
M
Newtons Law of Gravitation
Circular Orbits
Keplers Laws
A straight, smooth (frictionless) transit tunnel is dug through a spherical asteroid of radius R
and mass M that has been converted into Darth Vaders death star. The tunnel is in the equatorial
plane and passes through the center of the death star. The death star moves about in a hard vacuum,
of course, and the tunnel is open so there are no drag forces acting on masses moving through it.
a) Find the force acting on a car of mass m a distance r < R from the center of the death star.
b) You are commanded to nd the precise rotational frequency of the death star such that
objects in the tunnel will orbit at that frequency and hence will appear to remain at rest
relative to the tunnel at any point along it. That way Darth can Use the Dark Side to move
himself along it almost without straining his midichlorians. In the meantime, he is reaching
his crooked ngers towards you and you feel a choking sensation, so better start to work.
c) Which of Keplers laws does your orbit satisfy, and why?
Problem 5.
r
0
= R
0
S
N
m
Newtons Second Law.
Newtons Law of Gravitation
Gravitational Field/Force Inside a Spherical Shell or Solid Sphere.
Harmonic Oscillation Given Linear Restoring Forces.
Denitions and Relations Involving and T.
A straight, smooth (frictionless) transit tunnel is dug through a planet of radius R whose mass
density
0
is constant. The tunnel passes through the center of the planet and is lined up with its
axis of rotation (so that the planets rotation is irrelevant to this problem). All the air is evacuated
from the tunnel to eliminate drag forces.
a) Find the force acting on a car of mass m a distance r < R from the center of the planet.
b) Write Newtons second law for the car, and extract the dierential equation of motion. From
this nd r(t) for the car, assuming that it starts at rest at r
0
= R on the North Pole at time
t = 0.
c) How long does it take the car to get to the South Pole starting from rest at the North Pole?
How long does it take to get back to the North Pole? Compare this (second answer) to the
period of a circular orbit inside the death star you found (disguised as ) in the previous
problem.
d) A nal thought question: Suppose it is released at rest from an initial position r
0
= R/2
(halfway to the center) instead of from r
0
. How long does it take for the mass to get back to
this point now (compare the periods)?
All answers should be given in terms of G,
0
, R and m.
Problem 6.
E
E
0
1
E
2
E
3
r
eff
U
The eective radial potential of a planetary object of mass m in an orbit around a star of mass
M is:
U
e
(r) =
L
2
2mr
2

GMm
r
(a form you already explored in a previous homework problem). The total energy of four orbits
are drawn as dashed lines on the gure above for some given value of L. Name the kind of orbit
(circular, elliptical, parabolic, hyperbolic) each energy represents and mark its turning point(s).
Problem 7.
In a few lines prove Keplers third law for circular orbits around a planet or star of mass M:
r
3
= CT
2
and determine the constant C and then answer the following questions:
a) Jupiter has a mean radius of orbit around the sun equal to 5.2 times the radius of Earths
orbit. How long does it take Jupiter to go around the sun (what is its orbital period or year
T
J
)?
b) Given the distance to the Moon of 3.84 10
8
meters and its (sidereal) orbital period of 27.3
days, nd the mass of the Earth M
e
.
c) Using the mass you just evaluated and your knowledge of g on the surface, estimate the radius
of the Earth R
e
.
Check your answers using google/wikipedia. Think for just one short moment how much of the
physics you have learned this semester is veried by the correspondance. Remember, I dont want
you to believe anything I am teaching you because of my authority as a teacher but because it
works.
Problem 8.
It is very costly (in energy) to lift a payload from the surface of the earth into a circular orbit, but
once you are there, it only costs you that same amount of energy again to get from that circular
orbit to anywhere you like if you are willing to wait a long time to get there. Science Fiction
author Robert A. Heinlein succinctly stated this as: By the time you are in orbit, youre halfway
to anywhere.
Prove this by comparing the total energy of a mass:
a) On the ground. Neglect its kinetic energy due to the rotation of the Earth.
b) In a (very low) circular orbit with at radius R R
E
assume that it is still more or less the
same distance from the center of the Earth as it was when it was on the ground.
c) The orbit with minimal escape energy (that will arrive, at rest, at innity after an innite
amount of time).
Problem 9.
m
x
y
M = 80m
D = 5d
d
The large mass above is the Earth, the smaller mass the Moon. Find the vector gravitational
eld acting on the spaceship on its way from Earth to Mars (swinging past the Moon at the instant
drawn) in the picture above.
Problem 10.
M
e
R
e
M
a
Gravitational Energy
Fully Inelastic Collisions
A bitter day comes: a roughly spherical asteroid of radius R
a
and density is discovered that
is falling in from far away so that it will strike the Earth. Ignore the gravity of the Sun in this
problem. Determine:
a) If it strikes the Earth (an inelastic collision if there ever was one) how much energy will
be liberated as heat? Express your answer in terms of R
e
and either g or G and M
e
as you
prefer. It is probably very safe to say that M
a
M
e
...
b) Chuck Norris lands on the surface of the asteroid to save the Earth, but instead of screwing
around with drills and nuclear bombs Chuck jumps up from the surface of the asteroid at a
speed of v
cn
to deliver a roundhouse kick that would surely break the asteroid in half and
cause it to miss the earth if it knows whats good for it (this is Chuck Norris, after all).
However, if you jump up too fast on an asteroid, you dont come down again! Does Chuck
ever fall down onto the asteroid after his jump?
c) Evaluate your answers to a-b above for the following data:
= 6 10
3
kilograms/meter
3
R
a
= 10
4
meters
R
e
= 6.4 10
6
meters
g = 10 meters/second
2
M
e
= 6 10
24
kilograms
v
cn
= 5 meters/second (1061)
Express your answer to a) both in joules and in tons (of TNT) where 1 ton-of-TNT =
4.2 10
9
joules. Compare the answer to (say) 30 Gigatons as a safe upper bound for the total
combined explosive power of every weapon (including all the nuclear weapons) on earth.
d) Find the size of an asteroid that (when it hits) liberates only the energy of a typical thermonu-
clear bomb, 1 megaton of TNT.
Problem 11.
There is an old physics joke involving cows, and you will need to use its punchline to solve this
problem.
A cow is standing in the middle of an open, at eld. A plumb bob with a mass of 1 kg is
suspended via an unstretchable string 10 meters long so that it is hanging down roughly 2 meters
away from the center of mass of the cow. Making any reasonable assumptions you like or need to,
estimate the angle of deection of the plumb bob from vertical due to the gravitational eld of the
cow.
Optional Problems
Continue Studying for Finals
using problems from the online review!

Intro Physics 1

Uploaded by

Copyright:

Available Formats

Intro Physics 1

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Intro Physics 1

Uploaded by

Copyright:

Available Formats

Introductory Physics I

in the right hand gure, right?). Newtons Laws will

N| is the (unknown) magnitude of the normal force.

= Lcos() x where x is measured, of course, from the origin.

) in terms of the reset clock t

. Your answer may be

= a + g is approximately 1009.8 meters/second

200 14 seconds to fall 1000 meters, it is almost

is identical to dierentiation by t and:

can be thought of as the coordinate system inside

is the car, moving at a constant velocity v relative to the

frame. It makes sense!

is not travelling at a constant velocity and we dierentiate equation 201,

= g a feels weaker and you feel lighter.

, and it points down in the boxcar

from its components is now straightforward:

is now inclined at the angle

(top view) (side view)

(top view) (side view)

, only the force component along d

does work. The other force component changes the

doesnt change the speed of the particle; it behaves like

B can be written more than one way (all equally valid):

in this case is:

F = ma the way we have been reciting. We emphasize this

in the opposite direction.

Figure 61: A single torque = r

from the triangle of vectors shown in the gure):

dm is the position of the center of mass in center of mass coordinates, which

) does the disk go before it stops rising?

2aH for the acceleration found in c).

L, and I with a. Then L

L = rmv =r p as shown. As the particle sweeps out a circle, so does

= Lcos() (from examining the various right triangles in the gure)

L, in gure 91. We can see from the gure

= Lsin() and = MgDsin() as before, and get:

F and determine the magnitude of this force. Note that it is equal in

. Then T = mg (the entire weight of the sign) and F

for each of the two forces. No torque due to N is

). Hence a bit of multiplication at

are the complex constants of integration since the solution

| and real phase angles

with a negative phase angle, since

might be a positive or negative number

and the whole

is shifted so that it is smaller than

is real, which will be true

is zero. This occurs when:

is imaginary, which will be true if

is now clearly longer

Resonance of a Driven Harmonic Oscillator

has to have units of

= /2, 3/2, 5/2 . . . (918)

. Clearly label each curve.

B (a conversion factor that scales microscopic

) can easily be determined from an examination of gure 133 above:

must equal the original unshifted wavelength.

later, it has moved a distance d = v

is the apparent time between wavefronts to the receiver)

V (r) = mg(r) (1014)