Ethernet Switch For Universal Multi-Service Aggregation: High Performance Carrier
Ethernet Switch For Universal Multi-Service Aggregation: High Performance Carrier
Ethernet Switch For Universal Multi-Service Aggregation: High Performance Carrier
As service providers and carriers worldwide look to scale their Metro Area Network, they must also select solutions that deliver not only greater performance at lower cost, but also the ability to rapidly and profitably roll out new services. The A-Series, Nokia Siemens Networks family of Carrier Ethernet Switches, is purpose-built to handle the requirements of service providers who are building the next generation of metro networks.
Features 60 Gigabit Carrier Ethernet Switch MEF compliant E-Line, E-LAN, and E-Tree services Standard MPLS and Pseudo Wire based Layer 2 Services MPLS-based 50ms Protection for network and equipment failures Scalable and Flexible L2VPN/E-LAN with ingress and egress bandwidth profiles per site utilizing VPLS-TE MPLS Point-to-Multipoint LSPs and IGMP support for Multicast video distribution Extensive L2 OA&M and troubleshooting tools Full redundancy and carrier class architecture
The A-4100 is a 6.5 unit high rack, compact Carrier Ethernet aggregation switch that supports up to six 10 Gigabit Ethernet ports or up to 48 Gigabit Ethernet ports. It features a 60 Gbps non-blocking switching fabric and supports non-blocking full wire-speed processing for all interfaces. The A-4100 employs a standard MPLSbased architecture to deliver mass deployed scalable services without the scalability limitations of typical Enterprise class Ethernet Switches. It also features sub-50 millisecond failure recovery, redundant DC power, full redundancy and hot swapability of all modules.
All power supplies and fan trays are front-serviceable for ease of access for on-going equipment troubleshooting and maintenance. The A-4100 is an ideal metro aggregation switch for compact Points of Presence (POPs) with low real estate and power availability, delivering scalable, highdensity Gigabit Ethernet and 10 Gigabit Ethernet performance.
A2100 A210
Product Overview
The A-4100 is a true Carrier Class switch, providing a full redundancy architecture, in-service software upgrade, and 50ms protection for equipment and network failures. It accommodates six Interface cards, each of which is one 10G Ethernet port, or 8 x 1 Gigabit ports, in addition to two Switch and Controller Cards, providing 1:1 switching and control redundancy. This compact, yet powerful combination provides service providers with unique flexibility in delivering scalable Ethernet services to Enterprise and residential customers, and backhaul applications in a variety of locations.
The A-4100 complements Nokia Siemens Networks family of A-Series Switches Carrier Ethernet Products including the A-2000 access platforms and the A-8100 core switching platform, while using the same Interface cards as the A-8100. The common architecture of the product portfolio, together with the industry-leading ASPEN network management platform delivers carrier-class architecture to support the scalability, protection, resiliency, seamless service provisioning and service management requirements of a service provider.
Applications
High Capacity Aggregation
The A-4100 provides a cost-effective, compact size Ethernet aggregation for small POPs and COs. The A-4100 offers a direct Ethernet UNI to subscribers either with or without GE demarcation devices, as well as termination of A-Series Switches 1G access rings based on the A-2000 family of products. The A-4100 also allows for off-Net subscriber connectivity through Q-in-Q VLAN handoff to 3rd party access providers and other access technologies (e.g. DSL, PON, Wireless etc.) 1G and 10G Standard MPLS core transport MEF E-Line, E-LAN, and E-Tree services with hard QoS and 50ms protection Extensive Ethernet OA&M and troubleshooting tools MEF 9 and MEF 14 Certified
A-4100 Specifications Chassis Physical Dimensions: 288mm(H) x 445mm(W) x 40.4cm(D) Physical: 19 and 23 Rack Mounted Front Access to all data and management ports Power requirements: 40.5V+/- 0.5V to 72V +/- 0.75V (47VDC Min. turn on voltage) Gigabit Ethernet Module Gigabit Ethernet 1000Base-X ports, small form-factor Pluggable (SFP) transceivers, LC connectors, hot-swappable: - 1000Base-SX Multi-mode (500m) - 1000Base-LX Single-mode (10km) - 1000Base-LH Single-mode (50km) - 1000Base-LH Single-mode (70km) - 1000Base-LH Single-mode (120km) - Coarse Wavelength Division Multiplexing (CWDM) interfaces (70km, 100km) 10 Gigabit Ethernet Module 10-GE Module XFP Connector. Supported optics: - Single-mode 10GE Module at 1310nm (40km) - Single-mode 10GE Tunable DWDM Module - Multi-mode 10GE 850nm (200m) - Single-mode 10GE 1310nm (10Km) - Single-mode 10GE 1550nm (40Km) - Single-mode 10GE 1550nm (70Km) - Single-mode 10GE DWDM Modules (C-band 50GHz tunable, DWDM MSA E2000 based connector Environmental Requirements Operating Temperature: 0 to 45C Operating Humidity: 10 to 95% relative humidity, non-condensing Storage Temperature: -20 to 85C NEBS GR-63 & GR-1089 (NEBS Level 3 type 2) Environmental EN 300 019 USA Europe FCC 47 CFR part 15 Subpart B EN 300 386 EN 300 132 EN 201 468 MIC certificate UL 60950 EN 60950
Interface Modules
IETF Drafts
draft-ietf-l2vpn-l2-framework-05.txt draft-ietf-l2vpn-requirements-06.txt draft-ietf-l2vpn-vpls-ldp-08.txt draft-ietf-pwe3-control-protocol17.txt draft-ietf-pwe3-ethernet-encap11.txt
USA & Canada: FDA Radiation Performance Standard 21 CFR Subchapter Europe: EN60825-1/2 ASPEN RS-232 Administration Console: Industrystandard Command Line Interface (CLI ) Out-of-band management via 10/100Base-TX port In-band management of entire network via Gigabit Ethernet port Dedicated management VLAN Supports multiple NMS stations SNMP Telnet / SSH Modem Radius Support Syslog Server Support SNTP Support Secured Device Login Authentication
Copyright 2007 Nokia Siemens Networks. All rights reserved. Other company and product names mentioned herein may be trademarks or trade names of their respective owners.
www.nokiasiemensnetworks.com