b9r Euro4 Rfs RHD

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

VOLVO B9R

R FS, R H D, Euro4 RH

Dimensions & Weights


Overall dimensions A Transport wheelbase ........... 3250 mm Wheelbase certified .... 4800-6900 mm G Overall length ........................ 8959 mm I Front overhang ...................... 2500 mm J Rear overhang ...................... 3209 mm Steering wheel location: N-steer ................................... 1818 mm C-steer ................................... 1648 mm Frame height ................................. 870 mm Frame height, rear ...................... 1694 mm Approach angle ................................. 8.0 Departure angle ................................. 7.6 Track width with tyres ....... 295/80R22.5" and steel disc rim .................. 8.25x22.5 M Front ...................................... 2069 mm N Rear ....................................... 1831 mm Weights Permitted front axle load ............ 6500 kg Permitted rear axle load ............. 11500 kg Permitted GVW .......................... 18000 kg

Pressure Governor for engine brake and warmholding function, closed crank case ventilation. Fuel filter (1 full flow prefilter, 1 full flow filter), oil filter (2 full flow, 1 bypass). Water cooled turbo charger with electronic waste gate control. Speed limit set to 100 km/h, 80 dB engine encapsulation. Bore .............................................. 120 mm Stroke ........................................... 138 mm Displacement .......................... 9.36 dm3 (l) Idling speed .................................. 600 rpm High idle speed .......................... 2000 rpm Engine oil volume incl. filter ................. 39 l D9B 340 Output ISO 1585 ............ 255 kW (340 hp) at ............................................ 1900 r/m Torque ISO 1585 ........................ 1632 Nm at ............................................ 1200 r/m Compression ratio ............................. 18:1 D9B 380 Output ISO 1585 ............ 286 kW (380 hp) at ............................................ 1900 r/m Torque ISO 1585 ........................ 1740 Nm at ............................................ 1200 r/m Compression ratio ............................. 18:1 Engine fulfills Euro 4 emission requirements. Optional ........................ Engine preheating Fuel tanks Two 150l tanks, mounted behind front axle. Fuel tanks capacity ........................... 300 l

Exhaust and Cooling System


Stainless steel exhaust system with SCR catalytic converter. AdBlue pump and 40 l urea tank (35 l used by the SCR muffler and 5 l is used for injectors cooling). Urea tank mounted on the left hand side. Catalytic converter is integrated with the silencer. Muffler sensor are linked to the On Board Diagnostics that alerts the driver if the level of air pollutants in the exhaust gases is excessive, and when AdBlue refilling is needed. 60 l urea tank as an option. Fluid cooled, pressurized, sealed cooling system, pump driven by the engine. Of the tube and fin heat exchanger type radiator. Optional ........................... Cyclone air filter

Transmission
Volvo AT2412C I-Shift Manual gearbox, 12 forward gears, 4 reverse, automatic gear changing available, electronic control system. Integrated compact retarder. Gear ratios: 14.94:1, 11.73:1, 9.04:1, 7.09:1, 5.54:1, 4.35:1, 3.44:1, 2.70:1, 2.08:1, 1.63:1, 1.27:1, 1.00:1. Rear gears: 17.48:1, 3.73:1, 4.02:1, 3.16:1. Four transmission packages are available: Basic, Commuter, Line Haul or Tourist & Charter. Packages functions: Launch control, Enhanced shift strategy (C, LH,

Engine
6-cylinder, 4-stroke turbo-charged intercooled diesel with overhead valves and electronically controlled direct injection. 4 valves per cylinder. On-board diagnostic, Volvo EMS2 engine control system, Exhaust

Volvo retains the right to alter design and equipment without prior notice.

VOLVO B9R
T&C); Kick down (LH, T&C); Eco Roll, Smart cruise control (C, LH, T&C); Gear Selection Adjustment (T&C). Gear shifting lever standard (B, C) or professional (LH, T&C). Foot and hand retarder control. ZF 6S-1600 Manual gearbox, 6 forward gears, 1 reverse, fully synchronized. Voith 120 retarder. Easy Gear Shift selector. Torque conv ............................................ 1st gear .......................................... 7.72:1 2nd gear ......................................... 4.42:1 3rd gear .......................................... 2.66:1 4th gear .......................................... 1.79:1 5th gear .......................................... 1.28:1 6th gear .......................................... 1.00:1 Reverse .......................................... 7.09:1 Max wheel angle outer wheel ....... 41.3 Max wheel angle inner wheel ........... 49 Steering wheel diameter ...... 450, 500 mm

R FS, R H D, Euro4
meter, fuel economy meter. Dashboard, center: speedometer, rev counter, fuel gauge, coolant temperature, brakes, turbo and oil pressure, indicators, warning lamps. Dashboard, left: emergency switch, tachograph, switches, audio control panel (option). Dashboard, right: radio, climate control unit. Steering wheel, left satellite: control buttons, Light Control Panel. Steering wheel, right satellite: gearbox selector, doorbrake knob, switches and warning lamps. Instruments, behind engine: selector switch for front or rear operation, starting, charging lamp, mechanical stop, oil gauge. These controls enable the engine to be run and controlled from the tail of the vehicle during service work. Optional ............................ Radio switches ................................. in steering wheel

Air and Brake system


Separate circuits for front and rear wheels. Air is fed from the compressor through the ping-tank to the air dryer, then to the primary air tank. A governor, incorporated in the air drier, controls the air pressure. The pressure setting influence the pressure in the brake system. The air passes a safety valve to the four-circuit protection valve. The pressure limiting valve protects the brake system from the high pressure. Four-circuit protection valve secures the feeding of each individual circuit. If any of the circuits fails, the feeding will continue to the other circuits. Disc brakes combined with electronic braking system EBS5. EBS standard package: ABS, lining wear sensing, lining wear control, brake blending, differential lock synchro, brake temperature warning, EBD (External Brake Demand), diagnosis via SAEJ1587, traction control. Additionally in medium package: lining wear analysis/warning, drag torque control, automatic differential lock, hill start aid, door brake, poor brake performance warning, brake assistant, wheel brake monitoring, EBS status recorder. Air tanks standard - Primary .................................... 30 dm3 (l) - Front circuit ............................. 30 dm3 (l) - Rear circuit .............................. 30 dm3 (l) - Park circuit ............................... 15 dm3 (l) Compressed air system can easily be filled from external circuit. Handbrake Air operated spring brake acting directly on the rear wheels. Application is infinitely variable by means of a control on the fascia.

Driveline - Rear axle and tyres


Rear axle The Volvo RS 1228B single reduction axle with four alternative ratios available. The casing designed for higher ground clearance, lightweight and quiet operation. Four axle ratios available: 2.85:1, 3.08:1, 3.36:1 and 3.70:1. Max speed km/h at max engine power: Ratio: ................................. 2.85:1 .. 3.08:1 Volvo AT2412C .................... 127 ...... 118 ZF 6S-1600 ................................ - ...... 118 Ratio: ................................. 3.36:1 .. 3.70:1 Volvo AT2412C .................... 109 ........... ZF 6S-1600 ........................... 108 ........ 98*
* Only with D9B340

Electrical system
The electrical system is a 24-volt system, where the chassis and engine frame are used as a ground. The batterys minus terminal is connected to the chassis via the battery disconnector. Battery box which is placed under the drivers seat, contains two serial connected 12-volt batteries. 2nd generation Bus Electrical Architecture (BEA2) with electronic databus system Multiplex 2 for data transmission, bus systems control, monitoring and coordination of all devices installed on the bus. Multiplex 2 also provides diagnostic information for driver and workshop. BEA2 features electronic control of the Engine Management System, transmission and suspension. For testing, callibrating and programming of the control units can be used a PC based software package VCADSPro. External lighting functions integrated in chassis Multiplex. They are activated by new Light Control Panel and controlled by Light Control Module. The system is equipped with three main switches: engine shut off, fuel shut off and electrical switch. Tachograph system is available, analog or digital, and Dynafleet logger tool. Battery capacity ................... 170, 225 Ah Alternators output ...................... 2x110 A

Tyres & Rims 10-stud steel disc wheels, aluminium as an option. Optional zink wheelnut protectors. Dual driving axle wheels. Extra spare wheel, tool kit, warning triangle, 2 wheelchocks. Rims ................................................. Tyres 8.25x22.5 ......................... 295/80R22.5

Suspension and Steering


Electronically Controlled Suspension, rigid front axle. Stabilizer front and rear. Anti roll bar at rear axle. Double-acting, hydraulic telescopic shock absorbers, two front, four rear. Front side kneeling, whole side kneeling as an option. Kneeling interrupt configuration stop or return. Numbers .......................... Front ..... Rear Air bellows ........................ 2 ............ 4 Levelling valves ................. 2 ............ 2 Steering gear Power steering of ball-and-nut type with built-in servo unit. Two inter-linked intermediate steering arms and individual link-rods to each sides steering arm. Pitman arm connected to the relay arm via a link-rod. Steering damper and steering wheel lock.

Vehicle Structure
The steel frame combines good stability with low weight. Precise dimensions make bodybuilding simpler. The frame structure is a combination of open channel sections and boxed sections, with welded together wheel arches; frame members are made of highstrength steel (18G2A). Long service life, increased loading capabilities. Rigidity provides good stability and driving characteristics.

Drivers seat and Station


Optional Volvo dashboard fully compatible with BEA2. Two satellites: on the right and the left side. Adjustable steering wheel, both height and tilt. Self canceling turn indicators. Outdoor/indoor temperature

Volvo retains the right to alter design and equipment without prior notice.

Volvo Bus Corporation


Gteborg, Sweden www.volvo.com

You might also like