9 MM AUTOMATIC PISTOL DOUBLE ACTION MODEL No. 39 PARTS LIST INSTRUCTIONS FOR USE MAINTENANCE SPECIFICATIONS REAR SIGHT ASS'V. MAGAZINE 6057 ASSEMBLY CIVILIAN 6034 6146 I 6032 Ttu-, chc m.nic diug ram and pans hst conform to the current spccrficauons
9 MM AUTOMATIC PISTOL DOUBLE ACTION MODEL No. 39 PARTS LIST INSTRUCTIONS FOR USE MAINTENANCE SPECIFICATIONS REAR SIGHT ASS'V. MAGAZINE 6057 ASSEMBLY CIVILIAN 6034 6146 I 6032 Ttu-, chc m.nic diug ram and pans hst conform to the current spccrficauons
9 MM AUTOMATIC PISTOL DOUBLE ACTION MODEL No. 39 PARTS LIST INSTRUCTIONS FOR USE MAINTENANCE SPECIFICATIONS REAR SIGHT ASS'V. MAGAZINE 6057 ASSEMBLY CIVILIAN 6034 6146 I 6032 Ttu-, chc m.nic diug ram and pans hst conform to the current spccrficauons
9 MM AUTOMATIC PISTOL DOUBLE ACTION MODEL No. 39 PARTS LIST INSTRUCTIONS FOR USE MAINTENANCE SPECIFICATIONS REAR SIGHT ASS'V. MAGAZINE 6057 ASSEMBLY CIVILIAN 6034 6146 I 6032 Ttu-, chc m.nic diug ram and pans hst conform to the current spccrficauons
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 4
9 M M AUTOMATIC PISTOL
DOUBLE ACTION MODEL No. 39
PARTS LIST • INSTRUCTIONS FOR USE • MAINTENANCE • SPECIFICATIONS
REAR SIGHT ASS'V. MAGAZINE
6057 • ASSEMBLY CIVILIAN 6034
6146 6032
~I
Ttu-, <chc m.nic diug ram and pans hst conform to the current spccrficauons provided h~ our Engineering Depurtment. From ume [0 Lime improve meru-, ate made In all our models. For [his reason. [he gun which you own may no! correspond exactly with the mtormatron provided on [hi .......h cet. w hcn requc stmg mtormunon o r or dcrmg parts for yo u r gun, please orovide the xc r i al number and approximate dale of purchase. 11-74 SMITH & WESSON 9 MM AUTOMATIC PISTOL
Caliber 9mm Luger and Para bellum Sights Fixed, Va-inch serrated ramp front; Maga:zine Capacity .8 Patridge type rear adjustable for WIndage Barrel Length .. 4 inches Stocks. Checked walnut with S&W monograms Length Over All 7\16 inches Finish S&W Blue or Nickel We'ight 26Y2 oz. without magazine !',."",,,,,iti,,,,, 9mm Luger and Parabellum
Smith & Wesson will refinish handguns of its own manufacture. No change of finish is offered on the Victory or Airweight® model or on Models 28, 39, 59., 64, 65, 66 or 67. Repair or replacement of parts are in addition to refinishing price.
SERVICE Should your Smith & Wesson revolver require ad A letter of instructions should be enclosed with justment, repair, or refinishing, we recommend most the gun, and shipment by individuals must be sincerely that the wea pon be returned to the fac made Prepaid. Adherence to these suggestions will tory or authorized service center. There is no other prevent loss of time in handling at (he factory. way to insure that the work will be done in a When returning guns for service, please remove properly equipped and staffed shop. custom stocks and holsters. We cannot assume re Charges are very reasonable, being based on the sponsibility for these items. cost of pans replaced plus a labor charge for the When your revolver arrives for service, it will time expended on the job. A labor charge for one be very carefully ins peered, together with your let hour is usually sufficient to cover all but very ter of instructions. Next, a quotation covering total extensive overhaul jobs. cost of work to be performed will be sent to you. Revolvers returned to the factory or authorized No actual work will be commenced before receiv service center should be MARKED FOR THE ing your approval of our quotation unless you ATTENTION OF THE SERVICE DEPARTMENT. specifically authorize us to do so.
SEE YOUR AUTHORIZED SMITH & WESSON
SERVICE CENTERS LIST FOR YOUR LOCAL SERVICE CENTER
SMITH & WESSON DOUBLE ACTION
9 M M AUTOMATIC PISTOL INSTRUCriONS FOR USE Before proceeding to use this weapon, a word of The cartridges in the MAGAZINE may be re caution is in order. This pistol is as safe to handle moved by pushing forward on the head of each and use as we can make it, but there is no fool cartridge until it is released from the MAGAZINE proof firearm. Be sure that the muzzle is pointing LIPS. in a safe direction at all times, whether the gun is loaded or not. Make safe gun handling a habit. To Disassemble (Field Strip) 1. Remove MAGAZINE by pressing MAGAZINE To Load RELEASE BUTTON on left side of FRAME Magazine capacity is 8 rounds. Release magazine to the rear of TRIGGER GUARD, and draw by pressing magazine catch nut on left side of ing MAGAZINE out of BUTT. frame back of trigger guard. Hold MAGAZINE 2. Inspect CHAMBER to assure that pistol is not in one hand with the rounded or forward edge loaded. away from the palm. Place a cartridge on the 3. Put SAFETY in "fire" or upper position. forward end of the FOLLOWER, press down and to the rear with the cartridge head or base toward 4. While pressing to left on right end of SLIDE the rear or flat edge of the MAGAZINE. Suc STOP (above TRIGGER on right side of ceeding cartridges are loaded in the same manner, FRAME) draw SLIDE to rear until RECESS in one on top of another. the lower left side of SLIDE is aligned with forward end of SLIDE STOP. Draw SLIDE Place MANUAL SAFETY in the lower or STOP completely from FRAME. "safe" position. Insert MAGAZINE in butt until engaged with MAGAZINE CATCH. Simply press 5. Pull SLIDE forward off from FRAME. magazine into place - do not drive in forcibly, 6. \\7ith SLIDE upside down, compress RECOIL as this practice may in time cause distortion of SPRING and lift out RECOIL SPRING GUIDE magazine lips and resultant malfunctions. Draw ASSEMBLY. SLIDE all of the way to the rear and release. \Vith 7. Remove BARREL BUSHING by rotating lower HAMMER down and SAFETY in "safe" position, portion toward left side of SLIDE and drawing the first shot may be discharged by simply placing forward out of SLIDE. the MANUAL SAFETY in the upper or "fire" 8. Remove BARREL by lifting rear end back and position and pulling the TRIGGER. The DOUBLE out of SLIDE. ACTION FEATURE cocks and releases the No further disassembly is recommended, as the HAMMER in one operation as in firing a double pistol may be properly cleaned and lubricated action revolver. Subsequent shots may be fired as when field-stripped as described above. in traditional automatic pistols. Upon firing the last round, the SLIDE STOP engages the SLIDE holding the action open. The To Reassemble MAGAZINE may now be withdrawn and reloaded. 1. Replace BARREL in SLIDE. To release the SLIDE STOP press downward. ~~ ~ ~ _Wlren SLIDE ~ STQ~is__di~e!1gagecl~~ID~_ will 2. Replace BARREL BUSHING. move forward to closed position. If it is desired 3. Replace RECOIL SPRING and RECOIL to continue firing, the SLIDE may be left open and SPRING GUIDE ASSEMBLY, making sure a Ioaded MAGAZINE inserted, in which case the that RECOIL SPRING GUIDE BUSHING is slide can be released by drawing the slide rearward engaged in the small radius cut in barrel lug and to its limit and letting it spring to battery position. properly centered. Failure to center properly Note that a cartridge in the CHAMBER can will leave RECOIL SPRING GUIDE protrud not be fired when the MAGAZINE is disengaged ing from BARREL BUSHING after assembly. from the MAGAZINE CATCH. This isa valuable 4. Replace SLIDE on FRAME, depressing EJEC safety feature. TOR and SEAR RELEASE LEVER in turn, so When unloading a loaded pistol, put MAN that SLIDE wiiI travel to the rear over them. UAL SAFETY in "safe" or low position. Press When slide stop cur on SLIDE is aligned with MAGAZINE RELEASE BUTTON and remove slide stop hole in FRAME, insert SLIDE STOP MAGAZINE. Next, draw SLIDE to rear, thus re and allow SLIDE to return to forward position. moving loaded cartridge from the CHAMBER. 5. Replace MAGAZINE. Care and Cleaning magazine catch body is supported. Using drift, press down magazine catch plunger and hold. Turn Pistols should be field stripped and cleaned at magazine catch nut counter-clockwise to loosen. reasonably frequent intervals to insure proper functioning. Use any good commercial solvent, and after To Reassemble Frame Assembly cleaning, lubricate sparingly with a light weight Insert magazine catch body in frame. Support gun oil. Outside surfaces may be protected from frame on solid surface and insert magazine catch corrosion by coating lightly with a rust inhibiting spring and plunger. Depress plunger and assemble oil or grease. magazine catch nut. Turn until shank of magazine Be careful not to drop magazines, as they may catch body is slightly below surface of nut. Release be sufficiently deformed to cause failure to feed plunger and let it snap into notch. properly. Insert trigger downward through top of frame. Insert draw bar plunger and spring into hole for ward of trigger. Insert draw bar through rear of To Disassemble Slide Assembly frame, engaging drawbar plunger. Hold drawbar Press rear end of firing pin forward as far as possi in position, and with frame bottom side up insert ble with drift punch. Grasp forward end of firing d isconnector. pin with pliers and hold. Turn manual safety Grasp trigger and work drawbar and trigger thumb-piece to point halfway between "fire" and play spring assembly all the way forward so that "safe" positions and press right end of safety bar. rear of drawbar is under the foot of the discon Manual safety may now be drawn out of slide. nector. Insert trigger pin. Be sure draw bar moves Hold thumb over rear end of firing pin and release under foot of disconnector. grip on pliers. Firing pin and firing pin spring Insert sear and sear pin, headed end of pin on may now be removed. Manual safety plunger and left side of frame. plunger spring may also be removed from manual Hold trigger back and insert stirrup and ham safety opening. mer. Release trigger. Insert ejector spring in hole Drive extractor pin from top out of tapered and set ejector in place. Insert sideplare stud through - nOle, remove extractor and spring. left side of frame, ejector, and partially through hammer stud hole. Insert sear release lever. Press sideplare stud completely through hammer, sear To Reassemble release lever, and frame. Hold slide bottom up, place spring and extractor Place mainspring and mainspring plunger over stirrup. Bring insert into position by guiding main in slot and align holes, drive pin in clear of frame track. spring plunger into recess in insert. Place top of insert in frame and swing base into place. Drive in Replace manual safety plunger and spring. In insert pin. sert firing pin and spring. Push rear end of firing Replace stocks and stock screws. pin forward as far as possible and hold forward end with pliers. Insert manual safety until end of safety bar contacts manual safety plunger. Release grip on pliers and depress manual safety plunger, pressing manual safety bar into position.
To Disassemble Frame Assembly
(After Removing Slide and Magazine)
Remove stocks» py, removing four stock screws.
Drive out ihs~r~~tlocated just above lanyard ring. Remove insert. Mainspring and mainspring plunger may then be lifted out of insert. Pull out sidcplate assernblv on left side of frame. Lift out hammer and stirrup. 'Remove ejector, ejector spring and sear re lease lever. Push sear pin out from right side of frame, allowing sear to drop our. Drive trigger pin out from left side, allowing drawbar to slide back toward rear of frame. Let disconnector drop out, and pull drawbar and trigger play spring assembly out from rear of frame. Tip frame to vertical posi tion, butt down, allowing draw bar plunger and spring to drop out. Push trigger upward and for ward out of frame. Place frame on right.. side so
