Porto Sag PS200-3P-T Spec Sheet

Voltage Sag Generator
Porto SagSM Model # PS200-3P-T Three-Phase, 200 A, up to 277/480 V

EPRI offers a unique diagnostic tool to industry, business, and electric utilities who want to perform voltage sag testing. The Porto SagSM allows investigators to identify weak links in a process quickly by injecting voltage sags of controlled magnitude and duration while monitoring the response of the process. Porto Sag helps engineers quickly characterize process components ranging from simple relays to complex programmable logic controllers, and equipment in industrial facilities such as Semiconductor Tools, HVAC, Machine Tools, lighting, even entire process lines. Its built-in data acquisition system automatically captures voltages, currents, and other user-connected signals during induced sag events. Using custom-engineered test equipment, EPRI has characterized the voltage sag immunity of hundreds of processes, semiconductor tools, machine tools, and devices since 1994.
The Porto-Sag PS200-3P-T is built into a rolling vertical rack for easy transportability in lab or manufacturing environments.
Features
z
Connects in series between the utility supply and load using simple input and output connections Wide range of test voltages (100277V, 50 or 60 Hz) Creates sags by switching momentarily to three adjustable transformers Easy setup for single-, split-, and three-phase loads Solid-state switch design for seamless transitions Sag depth 100% to 0% in 5% steps Swells up to 125% in 5% steps Three phases are independently variable, allowing unbalanced sags Voltage sag durations ranging from cycle to 3 seconds in cycle increments plus 5 sec and 10 sec durations 360-degree point-on-wave control Built-in start/stop circuit Built-in current transformers to monitor three-phase load current Captured waveforms can be saved in any of several formats including ASCII, CSV, bitmap, and metafile Software runs under Microsoft WindowsTM 95, 98, ME, 2000, XP and NT Meets testing requirements for IEC 61000-4-11, SEMI F42/F47 and the Revised SEMI F47 (SEMI F47-0706)
z z z z z z z z
z z z z
The Porto Sag software is a powerful diagnostic tool for capturing, analyzing, and exporting waveforms.
z z
Porto-Sag PS200-3P-T
Available Options
z
Tri-Mode Option (PS200-3P-T-TM): Allows for two additional test configurations to meet per IEC61000-4-34. The only commercially available voltage sag generator available that can enable testing for all three phase-to-phase test modes as noted in the new SEMI F47-0706. Phase-to-Phase Test voltages up to 480 Vac allowed. Notebook computer pre-loaded and tested with Porto Sag software On-site user training
z z
Includes
z z z z z
Main unit and all necessary interconnecting cables Three built-in multi-tapped transformers for controlling sag magnitude Built-in 16-channel data acquisition system Voltage probe accessory kit User manual and Porto-Sag software CD
Specifications
Electrical Control voltage Operating frequency Test voltage range Max load current Max load inrush current Input configuration Output configuration Power consumption Monitoring points 90 to 264 VAC 50 or 60 Hz, automatic detection 100277 V Phase-to-Neutral, 480 V Phase-to-Phase 200 Arms continuous 1800 Apeak for cycle 3-phase Y (requires Neutral for base mode) 3-Phase Y or Delta with Tri-Mode option 3-phase Y or delta 800 mA @ 120V (controls) Phase A, B, C (fused at 300 mA), N
Contact
For additional information about the EPRI Porto Sag, please contact: Doni Nastasi 865-218-8017 [email protected] 942 Corridor Park Boulevard Knoxville, TN 37932
Sag Control Sag duration Sag magnitude Swell magnitude Point-on-wave Trigger output Data Acquisition Sampling rate Resolution Max input voltage Size and Weight
22.5 x 18.5 x 22 (57 x 47 x 56 cm) Standard transformer (ea) 22.5 x 11.5 x 22 (57 x 29 x 56 cm) 22.5 x 18.5 x 22 Dual-mode transformer (57 x 47 x 56 cm)
cycle to 3 sec. in -cycle steps, 5 sec, 10 sec 100% to 0% in 5% steps (see vector summary) +5% to +25% in 5% steps (see vector summary) 360 in 1 increments TTL compatible
5 kHz or 10 kHz user selectable 12 bits Ch 1-8: 10 Vpeak AC or DC Ch 9-16: 700 Vpeak AC or DC (approx 480 Vrms)
Main system
123 lbs (56 kg) 90 lbs (41 kg) 160 lbs (73 kg)
Test Vector Summary for Porto-Sag Model PS-200-3P-T and Options

Test Vector Types Model Voltage Sag Test Vectors Resolution Maximum Voltage 277V L-N 480V L-L Requires Neutral Swell
Base Model
A, D, E, F
5% steps
Up to 125%
TriMode Option -TM
A,B,C,D,E,F
10% steps for Vector Type C 5% steps for all Others
277V L-N 480V L-L Neutral Not Required
Up to 120% for Vector Type C Up to 125% for all Others
Voltage Sag Vector Cross Reference Vector Type A B C D E F www.epri.com `

3
Voltage Sag Description Single-Phase Phase-to-Phase Alternative 1 Phase-to-Phase Phase-to-Phase, Alternative 2 Unbalanced Three-Phase Balanced Three-Phase
Other Common Designators Type I Type II.A1 Type II Type II.A2 N/A Type III
IEC 61000-4-34 Reference Figure Figure 3A Figure 3B Figure 3C Figure 3D N/A N/A

Porto Sag PS200-3P-T Spec Sheet

Uploaded by

Copyright:

Available Formats

Porto Sag PS200-3P-T Spec Sheet

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Porto Sag PS200-3P-T Spec Sheet

Uploaded by

Copyright:

Available Formats

Voltage Sag Generator

Porto SagSM Model # PS200-3P-T Three-Phase, 200 A, up to 277/480 V

Test Vector Summary for Porto-Sag Model PS-200-3P-T and Options

TriMode Option -TM

10% steps for Vector Type C 5% steps for all Others

277V L-N 480V L-L Neutral Not Required

Up to 120% for Vector Type C Up to 125% for all Others

Voltage Sag Vector Cross Reference Vector Type A B C D E F www.epri.com `

You might also like