Scribd
Upload
192 views2 pages

ACRT

ACRT

Uploaded by

1234abcd
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
192 views2 pages

ACRT

ACRT

Uploaded by

1234abcd
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

WIRELINE AND PERFORATING SERVICES

LOGIQ Array Compensated Resisitivity Tool (ACRt) System


Fast, Accurate, State-of-the-Art Array Induction
alliburton's LOGIQ Array Compensated Resistivity Tool (ACRt) logging system combines a new asymmetrical array sonde geometry with novel architecture and processing to produce the shortest array induction type tool in the industry without compromising dynamic range and accuracy. The tool incorporates a transmitter that operates at three frequencies simultaneously with six sub arrays of antennas strategically spaced from six to 80 inches from the transmitter. Unlike other array induction tools, the receiver arrays are asymmetrical which makes for a much shorter tool when compared with standard symmetrical arrays common in the industry. From the operation at multiple frequencies, accurate correction of skin effect can be applied to the measured conductivity data. The information obtained by the six receivers is used in conjunction with a direct measurement of mud resistivity and caliper, to automatically, and in real time, correct the measured conductivity by borehole effects. This information is then combined by a focusing algorithm to produce five radial resistivity curves with different depths of investigation (10, 20, 30, 60, and 90 inches). The software focusing algorithm can also produce the five radial resistivity curves with different vertical resolution (1, 2 and 4 feet). These curves are used for thin bed analysis and correlation and comparison with other logs. The radial resistivity curves can be used to find Rt, Rxo, and the diameter(s) of a linear invasion profile, D1, D2 or they can be used to create a resistivity invasion image that helps clarify the invasion processes in the formation. Other unique features of the LOGIQ ACRt tool is the fact that the tool is temperature characterized and has two thermometers in the sonde to correct in real time any temperature effects that occur, especially in the short arrays.
LOGIQ ACRt log data is processed via 2D software focusing, with radial resistivity curves computed in real time at focal depths of 10, 20, 30, 60 and 90 inches.

Integrated mud resistivity cell and proprietary thermal correction scheme for accurate, real time corrections of borehole and thermal effects Accurate, shallow induction measurements for reliable Rxo without the need for washout-sensitive pad-type micro-resistivity sensors Absent mechanical caliper data, borehole corrections can be driven by electrical caliper derived from short-spaced induction data

Features and Benefits


Comprehensive, multi-frequency data acquisition at multiple spacings for accurate invasion profiling Real time Rt-Rxo-Di log data processed via 2D software focusing

HALLIBURTON

HAL22122

LOGIQ ACRt System Specifications


Maximum Logging speed 3.625 in. Operating Temperature Rating Operating Pressure Rating Minimum Borehole Diameter Maximum Borehole Diameter Instrument 130.2 Length Weight 6,000 ft/hr 350F 20,000 psi 4.75 in 12.25 in 19.5 ft 308 lbs 1,830 m/hr 177C 1,400 bar 121 mm 311 mm 5.9 m 140 kg

Pre-Amp

Mud Cell 351.5

Measure Point 221.3

154.4

111.1

J-Latch Collar Bottom of J-Latch 3.8

www.halliburton.com/wireline
H05720 02/08 2008 Halliburton All Rights Reserved Printed in U.S.A. Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale.

HAL22123

HALLIBURTON

You might also like