Scribd Logo
Upload

Welcome to Scribd!

  • 40 views

    Gps Navigator Gp-150/Dual Operator's Guide: Selecting A Display Mode Enlarging/Shrinking The Display

    Uploaded by

    tansamaser
    This document provides instructions for operating various functions of a GPS navigator including: selecting display modes, enlarging/shrinking the display, shifting the cursor and display, entering/erasing marks, registering routes and waypoints, setting a destination, starting/stopping track plotting and recording, and setting an arrival alarm. Key steps involve pressing buttons like DISPLAY SEL, ZOOM IN/OUT, CURSOR ON/OFF, and entering information followed by pressing NU/CU ENT.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Gps Navigator Gp-150/Dual Operator's Guide: Selecting A Display Mode Enlarging/Shrinking The Display

    Uploaded by

    tansamaser
    40 views2 pages
    This document provides instructions for operating various functions of a GPS navigator including: selecting display modes, enlarging/shrinking the display, shifting the cursor and display, entering/erasing marks, registering routes and waypoints, setting a destination, starting/stopping track plotting and recording, and setting an arrival alarm. Key steps involve pressing buttons like DISPLAY SEL, ZOOM IN/OUT, CURSOR ON/OFF, and entering information followed by pressing NU/CU ENT.

    Original Title

    GP150 Operator_s Guide

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for operating various functions of a GPS navigator including: selecting display modes, enlarging/shrinking the display, shifting the cursor and display, entering/erasing marks, registering routes and waypoints, setting a destination, starting/stopping track plotting and recording, and setting an arrival alarm. Key steps involve pressing buttons like DISPLAY SEL, ZOOM IN/OUT, CURSOR ON/OFF, and entering information followed by pressing NU/CU ENT.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    40 views2 pages

    Gps Navigator Gp-150/Dual Operator's Guide: Selecting A Display Mode Enlarging/Shrinking The Display

    Uploaded by

    tansamaser
    This document provides instructions for operating various functions of a GPS navigator including: selecting display modes, enlarging/shrinking the display, shifting the cursor and display, entering/erasing marks, registering routes and waypoints, setting a destination, starting/stopping track plotting and recording, and setting an arrival alarm. Key steps involve pressing buttons like DISPLAY SEL, ZOOM IN/OUT, CURSOR ON/OFF, and entering information followed by pressing NU/CU ENT.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    GPS NAVIGATOR GP-150/DUAL Operators Guide

    The purpose of this Guide is to provide basic operating procedures for this equipment. For more detailed information, see the Operator's Manual.

    Selecting a Display Mode


    Press DISPLAY SEL to select desired mode.

    Enlarging/Shrinking the Display


    Press ZOOM IN to enlarge. Press ZOOM OUT to shrink.

    Plotter 1/Plotter 2
    34 23.456 N 135 45.678 E SAFE
    30 001

    D3D 100m
    BRG

    234 345

    Ship's track and data

    Shifting the Cursor


    1) Press CURSOR ON/OFF to turn on the cursor. 2) Operate the cursor pad to shift the cursor.

    COG
    40 50

    123
    20

    BRG To + RNG To +

    WGS84 16.00

    11.5 nm
    This column does not appear on Plotter 2 display.

    Shifting the Display


    1) Press CURSOR ON/OFF to turn off the cursor. 2) Operate the cursor pad to shift the display.
    Press the CENTER key to shift own ship to the center of the display.

    Highway
    34 23.456 N 135 45.678 E SAFE BRG

    D3D 100m

    34 45

    3D view of ship's track overlaid on intended course

    COG

    RNG

    0.35nm
    SOG WGS84

    12.3 kt

    Navigation
    TO; 012
    E
    D3D SAFE 100m

    Centering Cursor Position


    SOG

    12.3 kt 63 CSE 123


    BRG VTD

    Graphic display of steering data

    1) Press CURSOR ON/OFF to turn on the cursor. 2) Operate the cursor pad to position the cursor where desired. 3) Press CENTER.

    10.3 kt
    S
    0.1nm

    RNG

    0.1nm

    123 nm
    TRIP

    ETA WGS84

    15 23:45'

    TTG

    3D 17H 45M

    789 nm

    Entering/Erasing Marks
    Data
    JUN 12, 2006 23:59'59" U POSITION
    D3D SAFE 100m

    12 23.456' N 123 23.456' E


    BRG

    Comprehensive navigation data display


    MARINE POINT1

    1) Press CURSOR ON/OFF to turn on the cursor. 2) Operate the cursor pad to position the cursor where you wish to enter a mark. 3) Press MARK. To erase any mark (except MOB), place the cursor on the mark and press CLEAR.

    RNG

    31.23
    SOG

    nm

    223.4 123.4

    TO : 001 : 002
    MARINE POINT2

    COG

    NEXT

    12.3

    kt

    Selecting Mark Shape/Line Type


    1) Press MENU ESC and 2. 2) Press or to select Mark Shape (or Mark Line). 3) Press or to select mark shape (or mark line) desired. 4) Press NU/CU ENT. 5) Press MENU ESC.

    9) Choose ENTER and press NU/CU ENT. 10)Press NU/CU ENT.

    Registering Routes
    1) Press WPT RTE. 2) Press 6 (5 for Dual) to select Route Planning. 3) Press or to select route number. 4) Press . 5) Enter waypoint number (three digits). 6) Press . 7) Repeat steps 5 and 6 to enter next waypoint number. 8) Press MENU ESC twice to quite.

    Entering Event Mark


    Press EVENT MOB momentarily.

    Entering MOB Mark


    1) Press EVENT MOB (about three seconds) until Save MOB position appears. 2) Press NU/CU ENT.

    Setting/Cancelling Destination
    Destination can be set by four ways. Below is the method for setting destination by the cursor. 1) Press GOTO. 2) Press 1 to select Cursor. 3) Place the cursor on the position to set as destination. 4) Press NU/CU ENT twice. To cancel destination, press GOTO, 5, NU/CU ENT.

    Starting/Stopping Plotting and Recording of Track


    Press PLOT ON/OFF. H appears when recording is disabled. H disappears when recording is enabled.

    Registering Waypoints
    A waypoint can be entered by several ways. Below is the procedure for entry by the cursor. 1) Press WPT RTE. 2) Press 1 to select Cursor. 3) Operate the cursor pad to place the cursor on the position desired for a waypoint. 4) Press NU/CU ENT. 5) Press to select Mark column. 6) Press or to select mark shape. 7) Press NU/CU ENT. 8) Enter comment (maximum 12 alphanumeric characters).
    PUB.NO.OSE-44400-A (0602,HIMA) GP-150/DUAL
    This manual is printed with soy ink.

    Setting the Arrival Alarm


    1) Press MENU ESC and 4. 2) Press or to select Arrival/Anchor. 3) Press to select Arr. 4) Press to select Alarm Range. 5) Enter arrival alarm range. 6) Press NU/CU ENT. 7) Press MENU ESC. The buzzer may be silenced by pressing CLEAR.

    You might also like