CAST

STEEL
VALVES

SBP LIMITED

A Bonney Forge Venture Company

SBP LIMITED IS A BONNEY FORGE JOINT VENTURE COMPANY
408 XIANGHUAQIAO ROAD (E) QUINGPU SHANGHAI CHINA 201707
BONNEY FORGE CORPORATE HEADQUARTERS
MANUFACTURING/SALES CENTER/WAREHOUSE
14496 CROGHAN PIKE P.O. BOX 330 MT. UNION, PA 17066
(814) 542-2545 (800) 231-0655
(800) 345-7546 FAX (814) 542-9977
www.bonneyforge.com [email protected]

BONNEY FORGE CORPORATE HEADQUARTERS

MT. UNION, PA

TABLE OF CONTENTS

Corporate Overview ........................................................................................ 2, 3

Quality Assurance ........................................................................................... 4, 5
How To Order ...................................................................................................6-8
Gate Valves ....................................................................................................9-11
Globe Valves ...............................................................................................12-14
Swing Check Valves ....................................................................................15-17
Engineering Specications ...........................................................................18-29
Special Valves & Features................................................................. 18, 19
Bypass & Drain Connection .................................................................... 20
Butt-Welding Ends .................................................................................. 21
Flange Dimensions ........................................................................... 22, 23
Ring Joint Facings ............................................................................ 24, 25
Standard Class Pressure Temperature Ratings ....................................26-28
Storage, Installation & Maintenance ...................................................29-34
Terms & Conditions ................................................................................ 37

Bonney Forge The Name You

Can Trust for Cast Steel Valves
For decades, Bonney Forge forged steel
valves and piping components have
dened state-of-the-art in quality,
design and manufacturing. Today, our
extensive product line
of cast steel valves leads the way.
Since 2002, Bonney Forge has been
manufacturing its Cast Steel Valves
in Shanghai, China. SBP Limited
A Bonney Forge Venture Company,
manufactures a full line of Cast Steel
Gate, Globe and Check Valves designed
for ASME pressures 150# thru 1500#
and temperature ratings as low as -50F.
Our technicians can also customize a
conguration to t your needs. Bonney

A SINGLE-SOURCE
SOLUTION
Forge customers have a complete
choice of trim and body materials,
bypasses and connectors including:
lift indicators, limit microswitches,
pneumatic and electric actuators, bevel
gearings, chain wheels, extension stems,
oor stands, levers and dashpots.
SBP Limited also meets stringent
design and quality guidelines set and
directed by Bonney Forges corporate
engineering department at its corporate
location in Mt. Union, Pennsylvania,
USA. SBP Limited has also earned
the ISO 9001:2001, PED CE Mark,
API 6D, and API 600 Certicates.

Were Here for You

Bonney Forge is committed to
manufacturing excellence and is
focused on meeting our customers
needs. This catalog offers a vast
amount of product information and
specications. In the event that you
need additional information or technical
assistance please call our friendly
and knowledgeable customer service
team at (800) 231-0655 or visit our
website at www.bonneyforge.com.
Our Mission
To be, today and in the future, the
recognized leader in our industry,
marketing and manufacturing forged
steel valves, cast steel valves, forged
ttings, branch connections and
other related products to satisfy

our customers expectations.

To be cost effective through Total Quality
performance of these operations, and thus
provide the resources required to support
our commitment to improve our products,
processes and customer services.
To be a law abiding corporate citizen
respecting the rights of individuals,
contributing to the needs of the
community and conserving the
state of the environment.

QUALITY ASSURANCE
Testing
Bonney Forge products are manufactured and tested in strict accordance to ASTM, ASME, API and other industry codes and specications as
applicable.
Material Certications are available upon request to the applicable ASTM/ASME material specications for all Bonney Forge Valve bodies and
bonnets.
Modern machining equipment plus rigid inspection procedures of all parts assures dimensional accuracy of every part. Quality Assurance
procedures include, 100% hydrostatic and pneumatic testing of all valves in full conformance to applicable API standards and industry codes.
Chemical and mechanical properties of every Bonney Forge cast steel valve are fully traceable to the original casting heat lot.
Material Safety Data Sheets
Material Safety Data Sheets (MSDS) are required for hazardous chemicals under the Occupational Safety and Health Administration (OSHA)
Hazard Communication Standard 29 CFR 1910.1200. Bonney Forge Corporation has determined that its valve and tting products are
articles, as dened by this standard, and therefore do not require material safety data sheets.
Certicates
Also, SBP limited is fully qualied and maintains the ISO 9001 2001, PED CE Mark, API 6D and API 600 certications,
as indicated below.
Manufacturing Capabilities

The SBP Limited facilities are located in Shanghai, China and are in full accordance with ISO 9001 and CE Mark certications.

HOW TO ORDER/SPECIFY CAST STEEL VALVES

1. Specify valve size
2. Designate Bonnet Style and Pressure Class from Section A
3. Select Valve Type desired from Section B
4. Indicate Body/Bonnet and Trim Material from Section C
5. Select End Conguration from Section D
6. Select other Body/Bonnet/Trim from Section E
7. Select Special Requirement(s) from Section F
8. Specify as a Sufx String, after Section D or E, any Body/Bonnet
Material, Trim Material or Special Requirements not listed below

SECTION A- BONNET STYLE AND PRESSURE CLASS

1
Bolted Bonnet
Class 150#
3
Bolted Bonnet
Class 300#
6
Bolted Bonnet
Class 600#
Bolted Bonnet
Class 900#
9
15
Bolted Bonnet
Class 1500#
Note: Pressure Seal Bonnet design available upon request

SECTION B- TYPE OF VALVE

1
3
6

Gate Valve, Flexible Wedge

Globe Valve, T Pattern
Check Valve, Swing Type

SECTION C- BODY/BONNET AND TRIM MATERIAL

1
1N
2
3
4
5
6
7
8
8S
9
0

A216WCB

Body/Bonnet, Trim 13% Cr (F6/CA15) Hard Faced

Seats (1/2 Stellite) API Trim #8
A216WCB
Body/Bonnet, Trim 13% Cr (F6/CA15) API Trim #1
A216WCB
Body/Bonnet, Trim 13% Cr (F6/CA15) Hard Faced
Seats & Disc (Full Stellite) API Trim #5
A216WCB
Body/Bonnet, Trim 18% Cr-8NI (316/CF8M) API Trim #12
A216WCB
Body/Bonnet, Trim Ni-Cu Alloy, (Monel Metal) API Trim #9
A217WC9
Body/Bonnet, 21/4 % Cr 1% Mo, Trim 13% Cr
(F6/CA15) Hard Faced Seats (1/2 Stellite) API Trim #8
A217C5 Body/Bonnet, 5% Cr 1/2 % Mo, Trim 13% Cr
(F6/CA15) Hard Faced Seats (1/2 Stellite) API Trim #8
A351CF8
Body/Bonnet, Trim 18% Cr - 8 Ni(304/CF8)
Trim 304 Stainless Steel API Trim #2
A351CF8M
Body/Bonnet, Trim 18% Cr - 8 Ni(316/CF8M)
Trim 316 Stainless Steel API Trim #10
A351CF8M
Body/Bonnet, Trim 18% Cr - 8 Ni(316/CF8M) Trim 316
Stainless Steel, Hard Faced Seats (1/2 Stellite) API Trim #12
A217WC6
Body/Bonnet, 11/4 % Cr 1/2 Mo, Trim 13% Cr
(F6/CA15) Hard Faced Seats (1/2 Stellite) API Trim #8
Other
Specify

SECTION D- END CONFIGURATION

RF
RTJ
BW

Raised Face, Flanged End, 125-250 AARH

Ring Type Joint
Butt Weld Ends (Specify Pipe Schedule)

SECTION E- OTHER BODY/BONNET OR TRIM MATERIALS

C12
A217C12
9% Cr 1% Moly Steel
CA15
A217CA15
13% Cr 1/2 Moly Steel
LCB/LCC
A352LCB
Low Temp Carbon Steel - 50 F
CF3
A351CF3
Stainless Steel, Type 304L
Note: Other body/bonnet/trim materials available upon request

HOW TO ORDER/SPECIFY CAST STEEL VALVES

SECTION E- AVAILABLE TRIM MATERIALS
TRIM
API 600 TRIM No.

Wedge Check Disc

Seating
Surface

Seat Ring

Stellite

Globe Disc

F6

Seat Ring
Back Seat

F304

F6

Stem Hinge Pin

F6

F6

F316

Monel

Stellite

Stellite

F6

F6

F316

Monel

Stellite

F6

F6

Monel

10

F316

12

Stellite
F316

SECTION F- MODIFICATIONS/SPECIAL REQUIREMENTS

BG
BYP
CWO
CRY
EMO
GD
NACE
PMI

Bevel Gear Operator

Bypass
Chainwheel Operated
Cryogenic Bonnet
Electric Motor Operator
Guided Disc (Globe Valves)
NACE Requirements to MR-01-03, latest edition
Positive Material Identication required

List as a sufx, by abbreviation if possible,

any other requirement not shown on this list
Example: 3" 150# RF Flanged Gate Valve, Bolted Bonnet,
ASTM A216WCB Body/Bonnet with 1/2 Stellite Trim
1
_________
Sec A

11
____________
Sec. B, Sec. C

AS: 3" 1-11-RF

RF
____________
Sec. D

13

15

16

Stellite

Stellite

F304

F316

ALLOY
20

GATE VALVES - CLASS 150

MATERIALS OF CONSTRUCTION
ITEM DESCRIPTION

Design construction:
API 600, ASME B16.34
Pressure Temperature Rating ASME B16.34
Face to Face / End to End ASME B16.10
Connection ASME B16.5 / B16.25
Testing and Inspection API 598

DIMENSIONAL SPECIFICATIONS
2
2.5
inch
SIZE
mm 50
65
7.00 7.50
inch
L
mm 177.80 190.50
inch 8.50 9.50
L1
mm 215.90 241.30
7.50 8.00
inch
L2
mm 190.50 203.20
8
8
inch
W
mm 200 200
inch
W1
mm
19.50
16.65
inch
H (OPEN) mm
423 495
inch
H1 (GEAR) mm
inch
A
mm
62
47
lb
WT (RF)
kg
28
21
47
40
lb
WT (BW) kg
21
18
lb
WT (RF & GO) kg
lb
WT (BW & GO) kg
CV Fac410
tors

3
80
8.00
203.20
11.12
282.45
8.50
215.90
10
250

4
100
9.00
228.60
12.00
304.80
9.50
241.30
10
250

5
130
10.00
254.00
15.00
381.00
10.50
266.7
10
250

6
150
10.50
266.70
15.88
403.35
11.00
279.40
12
300

80
36
67
30

118
53
98
44

133
60
120
54

187
84
169
76

8
200
11.5
292.10
16.50
419.10
12.00
304.80
14
350
12.0
305
39.00
995
42.13
1070
8.66
220
309
139
280
126
358
161
329
148

710

1300

3110

5720

20.50 23.50 28.00 29.80

520 596 711 759

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

Body
Seat Ring
Wedge
Stem
Bonnet Bolt
Bonnet Nut
Gasket
Bonnet
Back Seat
Packing
Eye Bolt Pin
Gland Eye Bolt
Packing Gland
Flange Gland
Eye Bolt Nut
Grease Nipple
Yoke Sleeve
Sleeve Nut
Handwheel
Handwheel Nut
Set Screw
Yoke
Yoke Nut
Yoke Bolt
Bearing

10
250
13.00
330.20
18.00
457.20
13.50
342.90
16
400
12.2
305
26.50
1180
50.75
1289
8.66
220
447
201
398
179
496
223
447
201

12
300
14.00
355.60
19.75
501.65
14.50
368.30
20
500
12.2
305
56.00
1432
59.41
1509
8.66
220
711
320
673
303
760
342
722
325

8935 13350

14
350
15.00
381.00
22.50
571.50
15.50
393.70
20
500
12.2
305
60.50
1535
63.54
1614
14.17
360
956
430
884
398
1000
450
929
418
-

MATERIAL
A216 WCB
A105 + Stellite
A216 WCB / 13% CR.
A182 F6
A193 B7
A194 2H
316 Graphite Corrugated
A216 WCB
A182 F6
Graphite
Steel
A193 GR. B7
A182 F6a
A216 WCB
A194 GR 2H
Steel
A439 GR D2
Steel
Ductile Iron
Steel
Steel
A216 WCB
A194 GR. 2H
A193 GR B7
Steel

16
400
16.00
406.40
24.00
609.60
16.50
419.10
24
600
12.2
310
71.30
1811
72.44
1840
14.17
360
1218
548
1131
509
1262
568
1176
529

18
450
17.00
431.80
26.00
660.40
17.50
444.50
25
640
18.1
460
79.00
2009
79.21
2012
14.17
360
1653
744
1578
710
1720
774
1644
740

20
500
18.00
457.20
28.00
711.20
18.50
469.90
26
650
18.1
460
87.80
2230
85.83
2180
16.18
411
2482
1117
2393
1077
2549
1147
2460
1107

24
600
20.00
508.00
32.00
812.80
20.50
520.70
30
750
18.1
460
104.00
2641
100.79
2560
16.18
411
3258
1466
3169
1426
3324
1496
3236
1456

21560 36091 47615 67862

GATE VALVES - CLASS 300

MATERIALS OF CONSTRUCTION
ITEM DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

Design construction:
API 600, ASME B16.34
Pressure Temperature Rating ASME B16.34
Face to Face / End to End ASME B16.10
Connection ASME B16.5 / B16.25
Testing and Inspection API 598

DIMENSIONAL SPECIFICATIONS
2
2.5
3
4
inch
SIZE
mm 50
65
80
100
inch 8.50 9.50 11.12 12.00
L
mm 215.90 241.30 282.45 304.80
inch 8.50 9.50 11.12 12.00
L1
mm 215.90 241.30 282.45 304.80
9.12 10.12 11.75 12.62
inch
L2
mm 231.65 257.05 298.45 320.55
8
8
10
10
inch
W
mm 200 200 250 250
inch
W1
mm
16.93
20.67
21.85
24.41
inch
H (OPEN) mm 430 525 555 620
H1 (GEAR) inch
mm
inch
A
mm
lb 62.22 80.00 113.33 173.33
WT (RF)
kg
28
36
51
78
lb 48.89 60.00 88.89 133.33
WT (BW) kg
22
27
40
60
lb
WT (RF & GO) kg
lb
WT (BW & GO) kg
CV Fac410 710 1300
tors

10

5
130
15.00
381.00
15.00
381.00
15.62
396.75
14
350

6
8
10
150 200 250
15.88 16.50 18.00
403.35 419.10 457.20
15.88 16.50 18.00
403.35 419.10 457.20
16.5 17.12 18.62
419.10 434.85 472.95
14
16
18
350 400 450
12
12
12
305 305 305
31.10 31.69 39.57 48.43
790
805 1005 1230
32.87
40.75 50.08
835 1035 1272
8.66 8.66 8.66
220 220 220
237.78 320.00 506.67 711.11
107
144 228 320
191.11 251.11 406.67 564.44
86
113 183 254
368.89
555.56 760.00
166 250 342
300.00 455.56 613.33
135 205 276
-

3110 5720 8935

Body
Seat Ring
Wedge
Stem
Bonnet Bolt
Bonnet Nut
Gasket
Bonnet
Back Seat
Packing
Eye Bolt Pin
Gland Eye Bolt
Packing Gland
Flange Gland
Eye Bolt Nut
Grease Nipple
Yoke Sleeve
Sleeve Nut
Handwheel
Handwheel Nut
Set Screw
Yoke
Yoke Nut
Yoke Bolt
Bearing

MATERIAL
A216 WCB
A105 + Stellite
A216 WCB / 13% CR.
A182 F6
A193 B7
A194 2H
Spiral S.S. Graphite
A216 WCB
A182 F6
Graphite
Steel
A193 GR. B7
A182 F6
A216 WCB
A194 2H
Steel
A439 GR. D2
Steel
Ductile Iron
Steel
Steel
A216 WCB
A194 GR. 2H
A193 GR. B7
Steel

12
14
16
18
300
350 400
450
19.75 30.00 33.00 36.00
501.65 762.00 838.20 914.40
19.75 30.00 33.00 36.00
501.65 762.00 838.20 914.40
20.37 30.62 33.62 36.62
517.40 777.75 853.95 930.15
20
25
25
27
500
640 640
680
18
18
18
21
460
460 460
540
57.68 62.01 69.21 77.72
1465 1575 1758 1974
58.23 64.17 71.46 79.17
1479 1630 1815 2011
10.51 14.17 14.17 14.17
267
360 360
360
1000.00 1542.22 2400.00 2744.44
694 1080 1235
450
795.56 1280.00 2077.78 2342.22
576 935 1054
358
1066.67 1904.44 2604.44 3295.56
857 1172 1483
480
862.22 1642.22 2282.22 2893.33
739 1027 1302
388
13350

21560 36091

20
500
39.00
990.60
39.00
990.60
39.75
1009.65
30
760
21
540
85.31
2167
87.60
2225
16.18
411
3677.78
1655
3184.44
1433
4113.33
1851
3620.00
1629

24
600
45.00
1143.00
45.00
1143.00
45.88
1165.35
35
900
24
610
111.69
2837
105.00
2667
16.18
411
5155.56
2320
4364.44
1964
5853.33
2634
5062.22
2278

47615

67862

GATE VALVES - CLASS 600

MATERIALS OF CONSTRUCTION
ITEM DESCRIPTION

Design construction:
API 600, ASME B16.34
Pressure Temperature Rating ASME B16.34
Face to Face / End to End ASME B16.10
Connection ASME B16.5 / B16.25
Testing and Inspection API 598

DIMENSIONAL SPECIFICATIONS
2
inch
SIZE
mm
50
11.50
inch
L
mm
292.10
11.50
inch
L1
mm
292.10
11.62
inch
L2
mm
295.15
10
inch
W
mm
250
inch
W1
mm
18.31
inch
H (OPEN) mm
465
inch
H1 (GEAR) mm
inch
A
mm
91.11
lb
WT (RF)
kg
41
75.56
lb
WT (BW) kg
34
lb
WT (RF & GO) kg
lb
WT (BW & GO) kg
CV Factors

Body
Seat Ring
Wedge
Stem
Bonnet Bolt
Bonnet Nut
Gasket
Bonnet
Back Seat
Packing
Eye Bolt Pin
Gland Eye Bolt
Packing Gland
Flange Gland
Eye Bolt Nut
Grease Nipple
Yoke Sleeve
Sleeve Nut
Handwheel
Handwheel Nut
Set Screw
Yoke
Yoke Nut
Yoke Bolt
Bearing

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

2.5
65
13.00
330.20
13.00
330.20
13.12
333.25
10
250
-

20.94
532

21.85
555

26.97
685

31.30
795

126.67
57
104.44
47

160.00
72
128.89
58

284.44
128
220.00
99

444.44
200
344.44
155

6
150
22.00
558.80
22.00
558.80
22.12
561.85
18
450
12
305
35.83
910
45.47
1155
9.45
240
591.11
266
464.44
209
640.00
288
513.33
231

390

561

1235

3406

11

3
80
14.00
355.60
14.00
355.60
14.12
358.65
10
250

4
100
17.00
431.80
17.00
431.80
17.12
435.85
14
350

5
130
20.00
508.00
20.00
508.00
20.12
511.05
16
400

MATERIAL
A216 WCB
A105 + Stellite
A216 WCB / 13% CR.
A182 F6
A193 B7
A194 2H
Soft Iron
A216 WCB
A182 F6
Graphite
Steel
A193 GR. B7
A182 F6
A216 WCB
A194 2H
Steel
A439 GR. D2
Steel
Ductile Iron
Steel
Steel
A216 WCB
A194 GR. 2H
A193 GR. B7
Steel

8
200
26.00
660.40
26.00
660.40
26.12
663.45
20
500
18
460
45.08
1145
46.26
1175
10.24
260
931.11
419
746.67
336
997.78
449
813.33
366

10
250
31.00
787.40
31.00
787.40
31.12
790.45
24
600
24
610
49.92
1268
52.36
1330
12.60
320
1675.56
754
1368.89
616
1786.67
804
1480.00
666

6761

10565

GLOBE VALVES - CLASS 150

MATERIALS OF CONSTRUCTION
ITEM DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22

Design construction:
ASME B16.34
Pressure Temperature Rating ASME B16.34
Face to Face / End to End ASME B16.10
Connection ASME B16.5 / B16.25
Testing and Inspection API 598

DIMENSIONAL SPECIFICATIONS
2
inch
SIZE
mm
50
8.00
inch
L
mm 203.20
8.00
inch
L1
mm 203.20
8.50
inch
L2
mm 215.90
8
inch
W
mm
200
inch
W1
mm
14.02
inch
H (OPEN) mm
356
inch
H1 (GEAR) mm
inch
A
mm
46.67
lb
WT (RF)
kg
21
37.78
lb
WT (BW) kg
17
lb
WT (RF & GO) kg
lb
WT (BW & GO) kg
CV Factors

2.5
65
8.50
215.90
8.50
215.90
9.00
228.60
10
250
-

16.54
420

16.18
411

18.70
475

21.26
540

66.67
30
48.89
22

82.22
37
64.44
29

126.67
57
102.22
46

173.33
78
148.89
67

6
150
16.00
406.40
16.00
406.40
16.50
419.10
16
400
12
305
21.65
550
22.83
580
9.45
240
222.22
100
191.11
86
271.11
122
240
108

80

110

185

440

12

3
80
9.50
241.30
9.50
241.30
10.00
254.00
10
250

4
100
11.50
292.10
11.50
292.10
12.00
304.80
12
300

5
130
14.00
355.60
14.00
355.60
14.50
368.30
14
350

MATERIAL

Body
Seat Ring
Disc
Disc Thrust Plate
Disc Stem Nut
Stem
Gasket
Bonnet
Back Seat
Packing
Bonnet Bolt
Bonnet Nut
Eye Bolt Pin
Packing Gland
Gland Eye Bolt
Gland Flange
Eye Bolt Nut
Yoke Sleeve
Set Screw
Handwheel
Washer
Handwheel Nut

A216 WCB
A105 + Stellite #6
A105 / 13% CR.
A182 F6
A182 F6
A182 F6
Spiral S.S. Graphite
A216 WCB
A182 F6
Graphite
A193 B7
A194 2H
Steel
A182 F6
A193 B7
A216 WCB
A194 2H
A439 GR. D2
Steel
Ductile Iron
Steel
Steel

8
200
19.50
495.30
19.50
495.30
20.00
508.00
18
450
18
460
24.21
615
21.93
557
14.17
360
346.67
156
297.78
134
357.78
161
353.33
159

10
250
24.50
622.30
24.50
622.30
25.00
635.00
18
450
18
460
29.49
749
26.34
669
14.17
360
580.00
261
504.44
227
684.44
308
608.89
274

12
300
27.50
698.50
27.50
698.50
28.00
711.20
25
640
18
460
36.30
922
33.86
860
14.17
360
684.44
308
604.44
272
988.89
445
908.89
409

830

1035

2065

GLOBE VALVES - CLASS 300

MATERIALS OF CONSTRUCTION
ITEM DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22

Design construction:
ASME B16.34
Pressure Temperature Rating ASME B16.34
Face to Face / End to End ASME B16.10
Connection ASME B16.5 / B16.25
Testing and Inspection API 598

DIMENSIONAL SPECIFICATIONS
2
inch
SIZE
mm
50
10.50
inch
L
mm
266.70
10.50
inch
L1
mm
266.70
11.12
inch
L2
mm
282.45
8
inch
W
mm
200
inch
W1
mm
15.12
inch
H (OPEN) mm
384
inch
H1 (GEAR) mm
inch
A
mm
68.89
lb
WT (RF)
kg
31
55.56
lb
WT (BW) kg
25
lb
WT (RF & GO) kg
lb
WT (BW & GO) kg
CV Factors

2.5
65
11.50
292.10
11.50
292.10
12.12
307.85
10
250

Body
Seat Ring
Disc
Disc Thrust Plate
Disc Stem Nut
Stem
Gasket
Bonnet
Back Seat
Packing
Bonnet Bolt
Bonnet Nut
Eye Bolt Pin
Packing Gland
Gland Eye Bolt
Gland Flange
Eye Bolt Nut
Yoke Sleeve
Set Screw
Handwheel
Washer
Handwheel Nut

4
100
14.00
355.60
14.00
355.60
14.62
371.35
14
350
12
305
20.28
515
21.46
545
9.45
240
186.67
84
168.89
76
235.56
106
217.78
98

5
130
15.75
400.05
15.75
400.05
16.37
415.80
16
400

3
80
12.50
317.50
12.50
317.50
13.12
333.25
12
300
12
305
17.72
450
18.90
480
9.45
240
122.22
55
102.22
46
171.11
77
151.11
68

80

100

185

18.11
460
-97.78
44
77.78
35
-

13

MATERIAL
A216 WCB
A105 + Stellite #6
A105 / 13% CR.
A182 F6
A182 F6
A182 F6
Spiral S.S. Graphite
A216 WCB
A182 F6
Graphite
A193 B7
A194 2H
Steel
A182 F6
A193 B7
A216 WCB
A194 2H
A439 GR. D2
Steel
Ductile Iron
Steel
Steel

6
150
17.50
444.50
17.50
444.50
18.12
460.25
18
450
12
305
24.33
618
25.51
648
9.45
240
333.33
150
264.44
119
382.22
172
313.33
141

8
200
21.00
533.40
22.00
558.80
22.62
574.55
20
500
18
460
29.13
740
30.31
770
14.17
360
500.00
225
400.00
180
566.67
255
466.67
210

10
250
24.50
622.30
24.50
622.30
25.12
638.05
24
610
24
610
41.30
1049
42.44
1078
16.18
411
855.56
385
731.11
329
1333.33
600
1186.67
534

440

830

1305

22.44
570
244.44
110
220.00
99
-

GLOBE VALVES - CLASS 600

MATERIALS OF CONSTRUCTION
ITEM DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22

Design construction:
ASME B16.34
Pressure Temperature Rating ASME B16.34
Face to Face / End to End ASME B16.10
Connection ASME B16.5 / B16.25
Testing and Inspection API 598

DIMENSIONAL SPECIFICATIONS
2
inch
SIZE
mm
50
11.50
inch
L
mm
292.10
11.50
inch
L1
mm
292.10
11.62
inch
L2
mm
295.15
10
inch
W
mm
250
inch
W1
mm
17.83
inch
H (OPEN) mm
453
inch
H1 (GEAR) mm
inch
A
mm
100.00
lb
WT (RF)
kg
45
84.44
lb
WT (BW) kg
38
lb
WT (RF & GO) kg
lb
WT (BW & GO) kg
CV Factors

2.5
65
13.00
330.20
13.00
330.20
13.12
333.25
12
300

3
80
14.00
355.60
14.00
355.60
14.12
358.65
14
350

21.50
546

22.17
563

142.22
64
120.00
54

173.33
78
142.22
64

100

14

Body
Seat Ring
Disc
Disc Thrust Plate
Disc Stem Nut
Stem
Gasket
Bonnet
Back Seat
Packing
Bonnet Bolt
Bonnet Nut
Eye Bolt Pin
Packing Gland
Gland Eye Bolt
Gland Flange
Eye Bolt Nut
Yoke Sleeve
Set Screw
Handwheel
Washer
Handwheel Nut

5
130
20.00
508.00
20.00
508.00
20.12
511.05
20
500

4
100
17.00
431.80
17.00
431.80
17.12
434.85
16
400
12
305
25.91
658
27.09
688
9.45
240
300.00
135
235.56
106
348.89
157
284.44
128

153

263

MATERIAL
A216 WCB
A105 + Stellite #6
A105 / 13% CR.
A182 F6
A182 F6
A182 F6
Soft Iron
A216 WCB
A182 F6
Graphite
A193 B7
A194 2H
Steel
A182 F6
A193 B7
A216 WCB
A194 2H
A439 GR. D2
Steel
Ductile Iron
Steel
Steel

6
150
22.00
558.80
22.00
558.80
22.12
561.85
22
560
18
460
31.02
788
34.25
870
9.45
240
726.67
327
580.00
261
926.67
417
800.00
360

1204.44
542
1020.00
459

513

882

28.15
715
471.11
212
348.89
157
-

8
200
26.00
660.40
26.00
660.40
26.12
663.45
24
610
37.01
940
16.26
413
-

CHECK VALVES - CLASS 150

MATERIALS OF CONSTRUCTION

Design construction:
ASME B16.34
Pressure Temperature Rating ASME B16.34
Face to Face / End to End ASME B16.10
Connection ASME B16.5 / B16.25
Testing and Inspection API 598

DIMENSIONAL SPECIFICATIONS
2
2.5
inch
SIZE
mm
50
65

3
80

4
100

5
130

6
150

ITEM DESCRIP-

MATERIAL

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

A216 WCB
A105 + Stellite
A105 / 13% CR.
A216 WCB
Steel
S.S.
S.S.
A182 F6
A216 WCB
A182 F304
Steel
Steel
A193 GR. B7
Spiral S.S. Graphite
A216 WCB
A194 GR. 2H
Steel
A193 GR. B7
A194 GR. 2H
A105
S.W. + Graphite

8
200

Body
Seat Ring
Disc
Hinge
Washer
Disc Nut
Pin
Hinge Pin
Yoke
Hinge Bolt
Washer
Spring Washer
Cover Bolt
Gasket
Cover
Cover Nut
Eye Bolt
Bolt
Nut
Cap
Gasket

10
250

12
300

14
350

16
400

8.50
9.50
11.50 13.00 14.00 19.50 24.50 27.50 31.00 34.00
inch 8.00
mm 203.20 215.90 241.30 292.10 330.20 355.60 495.30 622.30 698.50 787.40 863.60

L1

8.50
9.50
11.50 13.00 14.00 19.50 24.50 27.50 31.00 34.00
inch 8.00
mm 203.20 215.90 241.30 292.10 330.20 355.60 495.30 622.30 698.50 787.40 863.60

L2

9.00
10.00 12.00 13.50 14.50 20.00 25.00 28.00 31.50 34.50
inch 8.50
mm 215.90 228.60 254.00 304.80 342.90 368.30 508.00 635.00 711.20 800.10 876.30

inch
mm

6.30
160

6.57
167

7.10
180

WT (RF)

lb
kg

42.22
19

53.33
24

62.22
28

106.67 140.00 175.56 288.89 444.44 666.67 1002.22 1235.56

48
63
79
130
200
300
451
556

WT (BW)

lb
kg

33.33
15

44.44
20

51.11
23

93.33
42

246

356

620

CV Factors

15

8.54
217

11.22
285

12.40
315

14.37
365

17.52
445

20.08
510

20.94
532

22.95
583

113.33 148.89 262.22 360.00 524.44 715.56 1042.22

51
67
118
162
236
322
469
-

1414

2370

3300

4000

7900

CHECK VALVES - CLASS 300

MATERIALS OF CONSTRUCTION

Design construction:
ASME B16.34
Pressure Temperature Rating ASME B16.34
Face to Face / End to End ASME B16.10
Connection ASME B16.5 / B16.25
Testing and Inspection API 598

DIMENSIONAL SPECIFICATIONS
2
inch
SIZE
mm
50

ITEM DESCRIP-

MATERIAL

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

A216 WCB
A105 + Stellite
A105 / 13% CR.
A216 WCB
Steel
S.S.
S.S.
A182 F6
A216 WCB
A182 F304
Steel
Steel
A193 GR. B7
Spiral S.S. Graphite
A216 WCB
A194 GR. 2H
Steel
A193 GR. B7
A194 GR. 2H
A105
S.W. + Graphite

Body
Seat Ring
Disc
Hinge
Washer
Disc Nut
Pin
Hinge Pin
Yoke
Hinge Bolt
Washer
Spring Washer
Cover Bolt
Gasket
Cover
Cover Nut
Eye Bolt
Bolt
Nut
Cap
Gasket

2.5
65

3
80

4
100

5
130

6
150

8
200

10
250

12
300

inch
mm

10.50
266.70

11.50
292.10

12.50
317.50

14.00
355.60

15.75
400.05

17.50
444.50

22.00
558.80

24.50
622.30

28.00
711.20

L1

inch
mm

10.50
266.70

11.50
292.10

12.50
317.50

14.00
355.60

15.75
400.05

17.50
444.50

22.00
558.80

24.50
622.30

28.00
711.20

L2

inch
mm

11.12
282.45

12.12
307.85

13.12
333.25

14.62
371.35

16.37
415.80

18.12
460.25

21.62
549.15

25.12
638.05

28.62
726.95

inch
mm

7.68
195

8.27
210

8.86
225

10.63
270

12.20
310

12.99
330

15.55
395

18.31
465

18.98
482

WT (RF)

lb
kg

68.89
31

86.67
39

100.00
45

151.11
68

200.00
90

302.22
136

488.89
220

700.00
315

997.78
449

WT (BW)

lb
kg

57.78
26

68.89
31

82.22
37

113.33
51

148.89
67

244.44
110

386.67
174

451.11
203

853.33
384

227

329

680

1950

2400

3340

4000

CV Factors

16

CHECK VALVES - CLASS 600

MATERIALS OF CONSTRUCTION

Design construction:
ASME B16.34
Pressure Temperature Rating ASME B16.34
Face to Face / End to End ASME B16.10
Connection ASME B16.5 / B16.25
Testing and Inspection API 598

DIMENSIONAL SPECIFICATIONS
2
inch
SIZE
mm
50

ITEM DESCRIP-

MATERIAL

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

A216 WCB
A105 + Stellite
A105 / 13% CR.
A216 WCB
Steel
S.S.
S.S.
A182 F6
A216 WCB
A182 F304
Steel
Steel
A193 GR. B7
Soft Iron
A216 WCB
A194 GR. 2H
Steel
A193 GR. B7
A194 GR. 2H
A105
S.W. + Graphite

Body
Seat Ring
Disc
Hinge
Washer
Disc Nut
Pin
Hinge Pin
Yoke
Hinge Bolt
Washer
Spring Washer
Cover Bolt
Gasket
Cover
Cover Nut
Eye Bolt
Bolt
Nut
Cap
Gasket

2.5
65

3
80

4
100

5
130

6
150

8
200

10
250

12
300

inch
mm

11.50
292.10

13.00
330.20

14.00
355.60

17.00
431.80

20.00
508.00

22.00
558.80

26.00
660.40

31.00
787.40

33.00
838.20

L1

inch
mm

11.50
292.10

13.00
330.20

14.00
355.60

17.00
431.80

20.00
508.00

22.00
558.80

26.00
660.40

31.00
787.40

33.00
838.20

L2

inch
mm

11.62
295.15

13.12
333.25

14.12
358.65

17.12
434.85

20.12
511.05

22.12
561.85

26.12
663.45

31.12
790.45

33.12
841.25

inch
mm

7.09
180

7.76
197

11.22
285

12.80
325

13.50
343

14.80
376

20.94
532

22.95
583

23.94
608

WT (RF)

lb
kg

71.11
32

93.33
42

133.33
60

244.44
110

357.78
161

491.11
221

768.89
346

1395.56
628

1768.89
796

WT (BW)

lb
kg

53.33
24

73.33
33

108.89
49

182.22
82

282.22
127

404.44
182

646.67
291

1106.67
498

1535.56
691

213

308

679

1873

2400

3340

5045

CV Factors

17

ENGINEERING SPECIFICATIONS
SPECIAL FEATURES

LIFT
INDICATOR

LIMIT MICRO
SWITCHES

PNEUMATIC
OPERATOR

BEVEL
GEARING

BEVEL GEARING WITH

HORIZONTAL HANDWHEEL

ELECTRIC
ACTUATOR

18

EXTENSION
STEM

FLOOR
STAND

FLOOR STAND WITH

UNIVERSAL JOINT

CHAIN
WHEEL

CHECK VALVE
WITH DASH POT

CHECK VALVE WITH

OUTSIDE LEVER & WEIGHT

19

ENGINEERING SPECIFICATIONS
BYPASS & DRAIN CONNECTION
(on the same
side as E & F)

I
J

K
H

G
GATE VALVE

A
C

F
A

F
E

A&B

D
E&F

D
E

G
A
C

F
E
D

ANGLE VALVE
D

B
D
G
CHECK VALVE

These illustrations show the location of tapped holes. When placing an order please
quote the letters in the above illustrations designating the location of the tapped holes.
For more information see MSS-SP-45.

GLOBE VALVE

DRAIN & BYPASS DIMENSIONS

A

THREAD FOR CONNECTION TAPPING

SOCKET WELDING FOR CONNECTIONS

BOSSES FOR CONNECTIONS

Size of Valve .5

2" to 4"

5" to 8"

10" to 24"

Size of Tapping

1/2

3/4

Length of Thread

9/16

9/16

11/16

Minimum Diameter of Socket

7/8

1 1/16

1 5/16

Minimum Depth of Socket

3/16

1/4

1/4

Diameter of Boss

1 1/2

1 3/4

2 1/8
All dimensions given in inches

Bonney Forge valves can be equipped with by-passes which permit equalization of pressure on both sides of the
valve. Unless otherwise specied the by-pass arrangement will be furnished on the side of the main valve. By-passes of
other types can be made to order. Inquiries should give complete description or drawings.
By-pass valves are Bonney Forge forged steel bolted-bonnet, outside screw and yoke, socket-weld end
globe valves, and materials are suitable for the same service as the main valve.

20

ENGINEERING SPECIFICATIONS
Nominal
Pipe Size

BUTT-WELDING ENDS

Nominal
Pipe OD

Schedule
Number

Valve OD
A

Nominal ID
B

Wall Thickness
of Pipe T

2.875

40
80
160
XXS
40
80
160
XXS
40
80
120
160
XXS

2.875

0.203
0.276
0.375
0.552
0.216
0.300
0.438
0.600
0.237
0.337
0.438
0.531
.0674

2.469
20323
2.125
1.771
3.068
2.900
2.624
2.300
4.026
3.826
3.624
3.438
3.152

2 /12
3.500

ASME B 16.25

4.500

4
45

40
80
120
160
XXS

5 11/16

0.258
0.375
0.500
0.625
0.750

5.047
4.813
4.563
4.313
4.063

6.625

40
80
120
160
XXS

6 25/32

0.280
0.432
0.562
0.719
0.864

6.065
5.761
5.501
5.187
4.897

8.625

40
60
80
100
120
140
XXS
160
40
60
80
100
120
140
160
STD
40
XS
60
80
120
140
160
STD
40
XS
60
80
100
120
140
160

8 25/32

0.322
0.406
0.500
0.594
0.719
0.812
0.875
0.906
0.365
0.500
0.594
0.719
0.844
1.000
1.125
0.375
0.406
0.500
0.562
0.688
1.00
1.125
1.312
0.375
0.438
0.500
0.594
0.750
0.938
1.094
1.250
1.406

7.981
7.813
7.625
7.437
7.187
7.001
6.875
6.813
10.020
9.750
9.562
9.312
9.062
8.750
8.500
12.000
11.938
11.750
11.625
11.375
10.750
10.500
10.126
13.250
13.125
13.000
12.812
12.500
12.124
11.812
11.500
11.188

0.375
0.500
0.656
0.844
1.031
1.219
1.438
1.594
0.562
0.750
0.938
1.156
1.375
1.562
1.781

15.250
15.000
14.688
14.312
13.938
13.562
13.124
12.812
16.876
16.500
16.124
15.688
15.250
14.876
14.438

/16 1/32

30

A
/8 R

11/2 t
45

10 1

10.750

10

30
/16 1/32

/4

12.750

371/2
21/2
/8 R

12

11/2 t
Figures refer to
ASME B 16-25

14.000

14

16.000

IMPORTANT: When ordering butt welding end valves please state the type of
ends required and give the pipe dimensions or schedule number.

16
18.000

18

STD = Standard Wall Thickness

XS = Extra Strong Wall Thickness
XXS = Double Extra Strong Wall Thickness

20

All dimensions given in inches

Designations per ASME B 16.25

24

21

4 5/8

5.563

37 /2 2 /2
1

3 19/32

STD
40
60
80
100
120
140
160
40
60
80
100
120
140
160

10 15/16

12 31/32

14 1/4

16 1/4

18 9/32

20.000

40
60
80
100
120
140
160

20 5/16

0.594
0.812
1.031
1.281
1.500
1.750
1.969

18.812
18.376
17.938
17.438
17.000
16.500
16.062

24.000

30
40
60
80
100
120
140
160

24 3/8

0.562
0.688
0.969
1.219
1.531
1.812
2.062
2.344

22.876
22.624
22.062
21.562
20.938
20.376
19.876
19.312

ENGINEERING SPECIFICATIONS
FLANGE DIMENSIONS ASME B 16.5 and MSS-SP-44

ASME
150

ASME
300

Flange Thickness
Companion
Valve
Flange B
Flange B

Diameter
of Raised
Face
C

Diameter of
Bolt Circle
D

Diameter of
Bolt Holes
E

Number
of Bolts

Diameter
of
Bolts

7/16
1/2
9/16

1 3/8
1 11/16
2
2 1/2
2 7/8

2 3/8
2 3/4
3 1/8
3 1/2
3 7/8

5/8
5/8
5/8
5/8
5/8

4
4
4
4
4

1/2
1/2
1/2
1/2
1/2

5/8
11/16
3/4
13/16

3 5/8
4 1/8
5
5 1/2
6 3/16

4 3/4
5 1/2
6
7
7 1/2

3/4
3/4
3/4
3/4
3/4

4
4
4
8
8

5/8
5/8
5/8
5/8
5/8

15/16
1
1 1/8
1 3/16
1 1/4

7 5/16
8 1/2
10 5/8
12 3/4
15

8 1/2
9 1/2
11 3/4
14 1/4
17

7/8
7/8
7/8
1
1

8
8
8
12
12

3/4
3/4
3/4
7/8
7/8

21
23 1/2
25
27 1/2
32

1 3/8
1 7/16
1 9/16
1 11/16
1 7/8

16 1/4
18 1/2
21
23
27 1/4

18 3/4
21 1/4
22 3/4
25
29 1/2

1 1/8
1 1/8
1 1/4
1 1/4
1 3/8

12
16
16
20
20

1
1
1 1/8
1 1/8
1 1/8

26
28
30
32
34

34 1/4
36 1/2
38 3/4
41 3/4
43 3/4

1 3/8
1 7/16
1 9/16
1 11/16
1 7/8

29 1/2
31 1/2
33 3/4
36
38

31 3/4
34
36
38 1/2
40 1/2

1 5/8
1 5/8
1 5/8
1 5/8
1 5/8

24
28
28
28
32

1 1/4
1 1/4
1 1/4
1 1/2
1 1/2

36
38
40
42

46
48 3/4
50 3/4
53

3 9/16
3 7/16
3 9/16
3 13/16

40 1/4
42 1/4
44 1/4
47

42 3/4
45 1/4
47 1/4
49 1/2

1 5/8
1 5/8
1 5/8
1 5/8

32
32
36
36

1 1/2
1 1/2
1 1/2
1 1/2

1/2
3/4
1
1 1/4
1 1/2

3 3/4
4 5/8
4 7/8
5 1/4
6 1/8

9/16
5/8
1116
3/4
13/16

1 3/8
1 11/16
2
2 1/2
2 7/8

2 5/8
3 1/4
3 1/2
3 7/8
4 1/2

5/8
3/4
3/4
3/4
7/8

4
4
4
4
4

1/2
5/8
5/8
5/8
3/4

2
2 1/2
3
3 1/2
4

6 1/2
7 1/2
8 1/4
9
10

7/8
1
1 1/8
1 13/16
1 1/4

3 5/8
4 1/8
5
5 1/2
6 3/16

5
5 7/8
6 5/8
7 1/4
7 7/8

3/4
7/8
7/8
7/8
7/8

8
8
8
8
8

5/8
3/4
3/4
3/4
3/4

5
6
8
10
12

11
12 1/2
15
17 1/2
20 1/2

1 3/8
1 7/16
1 5/8
1 7/8
2

7 5/16
8 1/2
10 5/8
12 3/4
15

9 1/4
10 5/8
13
15 1/4
17 3/4

7/8
7/8
1
1 1/8
1 1/4

8
12
12
16
16

3/4
3/4
7/8
1
1 1/8

14
16
16
20
24

23
25 1/2
28
30 1/2
36

2 1/8
2 1/4
2 3/8
2 1/2
2 3/4

16 1/4
18 1/2
21
23
27 1/4

20 1/4
22 1/2
24 3/4
27
32

1 1/4
1 3/8
1 3/8
1 3/8
1 5/8

20
20
24
24
24

1 1/8
1 1/4
1 1/4
1 1/4
1 1/2

26
28
30
32
34

38 1/4
40 3/4
43
45 1/4
47 1/2

3 1/8
3 3/8
3 5/8
3 7/8
4

29 1/2
31 1/2
33 3/4
36
38

34 1/2
37
39 1/4
41 1/2
43 1/2

1 3/4
1 3/4
1 7/8
2
2

28
28
28
28
28

1 5/8
1 5/8
1 3/4
1 7/8
1 7/8

36
38
40

50
46
48 3/4

4 1/8
4 1/4
4 1/2

40 1/4
40 1/2
42 3/4

46
43
45 1/2

2 1/8
1 5/8
1 3/4

32
32
32

2
1 1/2
1 5/8

Nominal
Pipe Size

Flange
Diameter
A

1/2
3/4
1
1 1/4
1 1/2

3 1/2
3 1/2
4 1/2
4 1/2
5

7/16
1/2
9/16
5/8
11/16

2
2 1/2
3
3 1/2
4

6
7
7 1/2
8 1/2
9

3/4
7/8
15/16
15/16

5
6
8
10
12

10
11
13 1/2
16
19

14
16
16
20
24

15/16

End Flange dimensions comply with ASME B 16.5 and MSS-SP-44

All dimensions are in inches

22

The regular 1/16-inch raised face

of 150 lb. anges is included in the
minimum ange thickness given, but
other raised faces must be added
thereto. The bolt holes, which are
in multiples of four, are drilled to
straddle the centerline unless otherwise ordered.

The regular 1/16-inch raised face

of 300 lb. anges is included in the
minimum ange thickness given, but
other raised faces must be added
thereto. The bolt holes, which are
in multiples of four, are drilled to
straddle the centerline unless otherwise ordered.

150 &
300 lb. Steel

400, 600,
900, 1500 &
2500 lb. Steel

1/16"

1/16"

C
D
A

ASME
600

ASME
900

C
D
A

Nominal
Pipe Size

Flange
Diameter
A

Flange
Thickness

Diameter of
Raised Face
C

Diameter of
Bolt Circle
D

Diameter of
Bolt Holes
E

Number
of Bolts

Diameter
of
Bolts

1/2
3/4
1
1 1/4
1 1/2

3 3/4
4 5/8
4 7/8
5 1/4
6 1/8

9/16
5/8
11/16
13/16
7/8

1 3/8
1 11/16
2
2 1/2
2 7/8

2 5/8
3 1/4
3 1/2
3 7/8
4 1/2

5/8
3/4
3/4
3/4
7/8

4
4
4
4
4

1/2
5/8
5/8
5/8
5/8

2
2 1/2
3
3 1/2
4

6 1/2
7 1/2
8 1/4
9
10 3/4

1
1 1/8
1 1/4
1 3/8
1 1/2

3 5/8
4 1/8
5
5 1/2
6 3/16

5
5 7/8
6 5/8
7 1/4
8 1/2

3/4
7/8
7/8
1
1

8
8
8
8
8

5/8
3/4
3/4
7/8
7/8

5
6
8
10
12

13
14
16 1/2
20
22

1 3/4
1 7/8
2 3/16
2 1/2
2 5/8

7 5/16
8 1/2
10 5/8
12 3/4
15

10 1/2
11 1/2
13 3/4
17
19 1/4

1 1/8
1 1/8
1 1/4
1 3/8
1 3/8

8
12
12
16
20

1
1
1 1/8
1 1/4
1 1/4

14
16
18
20
24

23 3/4
27
29 1/4
32
37

2 3/4
3
3 1/4
3 1/2
4

16 1/4
18 1/2
21
23
27 1/4

20 3/4
23 3/4
25 3/4
28 1/2
33

1 1/2
1 5/8
1 3/4
1 3/4
2

20
20
20
24
24

1 3/8
1 1/2
1 5/8
1 5/8
1 7/8

26
28
30
32
34
36

40
42 1/4
44 1/2
47
49
51 3/4

4 1/4
4 3/8
4 1/2
4 5/8
4 3/4
4 7/8

29 1/2
31 1/2
33 3/4
36
38
40 1/4

36
38
40 1/2
42 1/2
44 1/2
47

2
2 1/8
2 1/8
2 3/8
2 3/8
2 5/8

28
28
28
28
28
28

1 7/8
2
2
2 1/4
2 1/4
2 1/2

3
4
5
6
8

9 1/2
11 1/2
13 3/4
15
18 1/2

1 1/2
1 3/4
2
2 3/16
2 1/2

5
6 3/16
7 5/16
8 1/2
10 5/8

7 1/2
9 1/4
11
12 1/2
15 1/2

1
1 1/4
1 3/8
1 1/4
1 1/2

8
8
8
12
12

7/8
1 1/8
1 1/4
1 1/8
1 3/8

10
12
14
16
18

21 1/2
24
25 1/4
27 3/4
31

2 3/4
3 1/8
3 3/8
3 1/2
4

12 3/4
15
16 1/4
18 1/2
21

18 1/2
21
22
24 1/4
27

1 1/2
1 1/2
1 5/8
1 3/4
2

16
20
20
20
20

1 3/8
1 3/8
1 1/2
1 5/8
1 7/8

20
24

33 3/4
41

4 1/4
5 /12

23
27 1/4

29 1/2
35 1/2

2 1/8
2 5/8

20
20

2
2 1/2

End Flange dimensions comply with ASME B 16.5 and MSS-SP-44

All dimensions are in inches

23

The regular 1/4-inch raised face of

600 lb. anges is not included in the
minimum ange thickness given. The
bolt holes, which are in multiples of
four, are drilled to straddle the centerline unless otherwise ordered.

Use 1500 lb. dimensions in sizes

smaller than 3-inch.

ENGINEERING SPECIFICATIONS
OVAL RING

RING JOINT FACINGS

ASME B 16.5 and B 16.20

23

OCTAGONAL RING
23

D
C

Groove suitable for either Oval or Octagonal ring

150
LB.

300,
600
LB.

Oval Ring
Height
B

Groove
Width
D

Octagonal
Ring Height
H

Ring Joint
Raised
Face
Diameter
K

Groove
Depth
L

Ring &
Groove
Pitch
Diameter
P

Nominal
Pipe Size

Ring
Number

Ring
Width
A

1
1 1/4
1 1/2
2

R15
R17
R19
R22

5/16
5/16
5/16
5/16

9/16
9/16
9/16
9/16

11/32
11/32
11/32
11/32

1/2
1/2
1/2
1/2

2 1/2
2 7/8
3 1/4
4

1/4
1/4
1/4
1/4

1 7/8
2 1/4
2 9/16
3 1/4

2 1/2
3
4
5

R25
R29
R36
R40

5/16
5/16
5/16
5/16

9/16
9/16
9/16
9/16

11/32
11/32
11/32
11/32

1/2
1/2
1/2
1/2

4 3/4
5 1/4
6 3/4
7 5/8

1/4
1/4
1/4
1/4

4
4 1/2
5 7/8
6 3/4

6
8
10
12

R43
R48
R52
R56

5/16
5/16
5/16
5/16

9/16
9/16
9/16
9/16

11/32
11/32
11/32
11/32

1/2
1/2
1/2
1/2

8 5/8
10 3/4
13
16

1/4
1/4
1/4
1/4

7 5/8
9 3/4
12
15

14
16
18
20
24

R59
R64
R68
R72
R76

5/16
5/16
5/16
5/16
5/16

9/16
9/16
9/16
9/16
9/16

11/32
11/32
11/32
11/32
11/32

1/2
1/2
1/2
1/2
1/2

16 3/4
19
21 1/2
23 1/2
28

1/4
1/4
1/4
1/4
1/4

15 5/8
17 7/8
20 3/8
22
26 1/2

1/2
3/4
1
1 1/4

R11
R13
R16
R18

1/4
5/16
5/16
5/16

7/16
9/16
9/16
9/16

9/32
11/32
11/32
11/32

3/8
1/2
1/2
1/2

2
2 1/2
2 3/4
3 1/8

7/32
1/4
1/4
1/4

1 11/32
1 11/16
2
2 3/8

1 1/2
2
2 1/2
3

R20
R23
R26
R31

5/16
7/16
7/16
7/16

9/16
11/16
11/16
11/16

11/32
15/32
15/32
15/32

1/2
5/8
5/8
5/8

3 9/16
4 1/4
5
5 3/4

1/4
5/16
5/16
5/16

2 11/16
3 1/4
4
4 7/8

4
5
6
8

R37
R41
R45
R49

7/16
7/16
7/16
7/16

11/16
11/16
11/16
11/16

15/32
15/32
15/32
15/32

5/8
5/8
5/8
5/8

6 7/8
8 1/4
9 1/2
11 7/8

5/16
5/16
5/16
5/16

5 7/8
7 1/8
8 5/16
10 5/8

10
12
14
16

R53
R57
R61
R65

7/16
7/16
7/16
7/16

11/16
11/16
11/16
11/16

15/32
15/32
15/32
15/32

5/8
5/8
5/8
5/8

14
16 1/4
18
20

5/16
5/16
5/16
5/16

12 3/4
15
16 1/2
18 1/2

18
20
24

R69
R73
R77

7/16
1/2
5/8

11/16
3/4
7/8

15/32
17/32
21/32

5/8
11/16
13/16

22 5/8
25
29 1/2

5/16
3/8
7/16

21
23
27 1/4

All dimensions are in inches

24

900
LB.

1500
LB.

Oval Ring
Height
B

Groove
Width
D

Octagonal
Ring Height
H

Ring Joint
Raised
Face
Diameter
K

Groove
Depth
L

Ring &
Groove
Pitch
Diameter
P

Nominal
Pipe Size

Ring
Number

Ring
Width
A

3
4
5
6

R31
R37
R41
R45

7/16
7/16
7/16
7/16

11/16
11/16
11/16
11/16

15/32
15/32
15/32
15/32

5/8
5/8
5/8
5/8

6 1/8
7 1/8
8 1/2
9 1/2

5/16
5/16
5/16
5/16

4 7/8
5 7/8
7 1/8
8 5/16

8
10
12
14

R49
R53
R57
R62

7/16
7/16
7/16
5/8

11/16
11/16
11/16
7/8

15/32
15/32
15/32
21/32

5/8
5/8
5/8
13/16

12 1/8
14 1/4
16 1/2
18 3/8

5/16
5/16
5/16
7/16

10 5/8
12 3/4
15
16 1/2

16
18
20
24

R66
R70
R74
R78

5/8
3/4
3/4
1

7/8
1
1
1 5/16

21/32
25/32
25/32
1 1/16

13/16
15/16
15/16
1 1/4

20 5/8
23 3/8
25 1/2
30 3/8

7/16
1/2
1/2
5/8

18 1/2
21
23
27 1/4

1/2
1/4
1
1 1/4

R12
R14
R16
R18

5/16
5/16
5/16
5/16

9/16
9/16
9/16
9/16

11/32
11/32
11/32
11/32

1/2
1/2
1/2
1/2

2 3/8
2 3/8
2 13/16
3 3/16

1/4
1/4
1/4
1/4

1 9/16
1 3/4
2
2 3/8

1 1/2
2
2 1/2
3

R20
R24
R27
R35

5/16
7/16
7/16
7/16

9/16
11/16
11/16
11/16

11/32
15/32
15/32
15/32

1/2
5/8
5/8
5/8

3 5/8
4 7/8
5 3/8
6 5/8

1/4
5/16
5/16
5/16

2 11/16
3 3/4
4 1/4
5 3/8

4
5
6
8

R39
R44
R46
R50

7/16
7/16
1/2
5/8

11/16
11/16
3/4
7/8

15/32
15/32
17/32
21/32

5/8
5/8
11/16
13/16

7 5/8
9
9 3/4
12 1/2

5/16
5/16
3/8
7/16

6 3/8
7 1/8
8 5/16
10 5/8

10
12
14
16

R54
R58
R63
R67

5/8
7/8
1
1 1/8

7/8
1 1/8
1 5/16
1 7/16

21/32
29/32
1 1/16
1 3/16

13/16
1 1/16
1 1/4
1 3/8

14 5/8
17 1/4
19 1/4
21 1/2

7/16
9/16
5/8
11/16

12 3/4
15
16 1/2
18 1/2

18
20
24

R71
R75
R79

1 1/8
1 1/4
1 3/8

1 7/16
1 9/16
1 3/4

1 3/16
1 5/16
1 7/16

1 3/8
1 1/2
1 5/8

24 1/8
26 1/2
31 1/4

11/16
11/16
13/16

21
23
27 1/4

All dimensions are in inches

25

ENGINEERING SPECIFICATIONS
STANDARD CLASS PRESSURE TEMPERATURE RATINGS
ASME B 16.34

A 216
Working
WCB(a)
Class by Temperature,
F
Pressures

A 352
LCB(d)

A 216 WCC(a) A 217

A 352 LC2(d) WC1(b)
A 352 LC3(d) A 352
A 352 LCC(e) LC1(d)

A 217
WC4(h)
A 217
WC5(i)

A 217
WC6(j)

A 217
WC9(j)

A 217
C5

A 217
C12

A 351
CF3(f)

A 351
CF3M(g)

A 351
CF8

A 351
CF8M

A 351
CF8C

A 351
CN7M(l)

Working Pressures in PSI

150
LB.

300
LB.

-20 to 100
200
300
400
500

285
260
230
200
170

265
255
230
200
170

290
260
230
200
170

265
255
230
200
170

290
260
230
200
170

290
260
230
200
170

290
260
230
200
170

290
260
230
200
170

290
260
230
200
170

275
230
205
190
170

275
235
215
195
170

275
255
230
200
170

230
200
180
160
150

600
650
700
750
800

140
125
110
95
80

140
125
110
95
80

140
125
110
95
80

140
125
110
95
80

140
125
110
95
80

140
125
110
95
80

140
125
110
95
80

140
125
110
95
80

140
125
110
95
80

140
125
110
95
80

140
125
110
95
80

140
125
110
95
80

140
125
110
95
80

850
900
950
1000
1050

65
50
35
20
-

65
50
35
20
-

65
50
35
20
-

65
50
35
20
-

65
50
35
20
20(1)

65
50
35
20
20(1)

65
50
35
20
20(1)

65
50
35
20
20(1)

65
50
35
20
20(1)

65
50
35
20
20(1)

65
50
35
20
20(1)

65
50
35
20
20(1)

1100
1150
1200
1250
1300

20(1)
20(1)
15(1)
-

20(1)
20(1)
15(1)
-

20(1)
20(1)
15(1)
-

20(1)
20(1)
20(1)
-

20(1)
20(1)
20(1)
20(1)
20(1)

20(1)
20(1)
20(1)
20(1)
20(1)

20(1)
20(1)
20(1)
20(1)
20(1)

1350
1400
1450
1500

20(1)
20(1)
20(1)
15(1)

20(1)
20(1)
20(1)
15(1)

20(1)
15(1)
10(1)
10(1)

-20 to 100
200
300
400
500

740
680
655
635
605

695
660
640
615
585

750
750
730
705
665

695
660
640
615
585

750
750
730
705
665

750
750
720
695
665

750
750
730
705
665

750
750
730
705
665

750
750
730
705
665

720
600
540
495
465

720
620
560
515
480

720
660
615
575
540

600
520
465
420
390

600
650
700
750
800

570
550
530
505
410

550
535
510
475
390

605
590
555
505
410

550
535
510
475
390

605
590
570
530
510

605
590
570
530
510

605
590
570
530
510

605
590
570
530
510

605
590
570
530
510

440
430
420
415
405

450
440
435
425
420

515
505
495
490
485

360
450
445
440
430

850
900
950
1000
1050

320
230
135
85
-

300
200
135
85
-

320
225
135
85
-

300
200
135
85
-

485
450
315
200
160

485
450
320
215
145

485
450
385
265
175

485
375
275
200
145

485
450
375
255
170

395
390
380
355
325

420
415
385
365
360

485
450
385
365
360

1100
1150
1200
1250
1300

95
65
40
-

110
70
40
-

100
60
35
-

115
75
50
-

255
205
165
135
115

305
235
185
145
115

310
210
150
115
75

1350
1400
1450
1500

95
75
60
40

95
75
60
40

50
40
30
25

26

A 216
Working
WCB(a)
Class by Temperature,
F
Pressures

A 352
LCB(d)

A 216 WCC(a) A 217

A 352 LC2(d) WC1(b)
A 352 LC3(d) A 352
A 352 LCC(e) LC1(d)

A 217
WC4(h)

A 217
WC6(j)

A 217
WC5(i)

A 217
WC9(j)

A 217
C5

A 217
C12

A 351
CF3(f)

A 351
CF3M(g)

A 351
CF8

A 351
CF8M

A 351
CF8C

A 351
CN7M(l)

Working Pressures in PSI

600
LB.

900
LB.

-20 to 100
200
300
400
500

1480
1360
1310
1265
1205

1395
1320
1275
1230
1175

1500
1500
1455
1405
1330

1395
1320
1275
1230
1175

1500
1500
1455
1410
1330

1500
1500
1445
1385
1330

1500
1500
1455
1410
1330

1500
1500
1455
1410
1330

1500
1500
1455
1410
1330

1440
1200
1075
995
930

1440
1240
1120
1025
955

1440
1325
1235
1150
1085

1200
1035
930
845
780

600
650
700
750
800

1135
1100
1060
1015
825

1105
1065
1025
955
780

1210
1175
1110
1015
825

1105
1065
1025
955
780

1210
1175
1135
1065
1015

1210
1175
1135
1065
1015

1210
1175
1135
1065
1015

1210
1175
1135
1065
1015

1210
1175
1135
1065
1015

885
865
845
825
810

900
885
870
855
845

1030
1015
995
985
975

720
900
890
880
865

850
900
950
1000
1050

640
460
275
170
-

595
405
275
170
-

640
445
275
170
-

595
405
275
170
-

975
900
630
405
315

975
900
640
430
290

975
900
755
535
350

975
745
550
400
290

975
900
755
505
345

790
780
765
710
650

835
830
775
725
720

970
900
775
725
720

1100
1150
1200
1250
1300

190
130
80
-

220
135
80
-

200
125
70
-

225
150
105
-

515
410
330
265
225

610
475
370
295
235

625
420
300
225
150

1350
1400
1450
1500

185
150
115
85

190
150
115
85

105
80
60
55

-20 to 100
200
300
400
500

2220
2035
1965
1900
1810

2090
1980
1915
1845
1760

2250
2250
2185
2110
1995

2090
1980
1915
1845
1760

2250
2250
2185
2115
1995

2250
2250
2165
2080
1995

2250
2250
2185
2115
1995

2250
2250
2185
2115
1995

2250
2250
2185
2115
1995

2160
1800
1615
1490
1395

2160
1860
1680
1540
1435

2160
1985
1850
1730
1625

1800
1555
1395
1265
1165

600
650
700
750
800

1705
1650
1590
1520
1235

1655
1600
1535
1430
1175

1815
1765
1665
1520
1235

1655
1600
1535
1430
1175

1815
1765
1705
1595
1525

1815
1765
1705
1595
1525

1815
1765
1705
1595
1525

1815
1765
1705
1595
1525

1815
1765
1705
1595
1525

1325
1295
1265
1240
1215

1355
1325
1305
1280
1265

1550
1520
1490
1475
1460

1080
1350
1335
1320
1295

850
900
950
1000
1050

955
690
410
255
-

895
605
410
255
-

955
670
410
255
-

895
605
410
255
-

1460
1350
945
605
475

1460
1350
995
650
430

1460
1350
1160
800
525

1460
1120
825
595
430

1460
1350
1130
760
515

1190
1165
1145
1065
975

1255
1245
1160
1090
1080

1455
1350
1160
1090
1080

1100
1150
1200
1250
1300

290
195
125
-

330
205
125
-

300
185
105
-

340
225
155
-

770
615
495
400
340

915
710
555
440
350

935
625
455
340
225

1350
1400
1450
1500

280
225
175
125

290
225
175
125

155
125
95
80

27

ENGINEERING SPECIFICATIONS
STANDARD CLASS PRESSURE TEMPERATURE RATINGS
ASME B 16.34

A 216
Working
WCB(a)
Class by Temperature,
F
Pressures

A 352
LCB(d)

A 216 WCC(a) A 217

A 352 LC2(d) WC1(b)
A 352 LC3(d) A 352
A 352 LCC(e) LC1(d)

A 217
WC4(h)

A 217
WC6(j)

A 217
WC5(i)

A 217
WC9(j)

A 217
C5

A 217
C12

A 351
CF3(f)

A 351
CF3M(g)

A 351
CF8

A 351
CF8M

A 351
CF8C

A 351
CN7M(l)

Working Pressures in PSI

1500
LB.

-20 to 100
200
300
400
500

3705
3395
3270
3170
3015

3480
3300
3190
3075
2930

3750
3750
3640
3520
3325

3480
3300
3190
3075
2930

3750
3750
3640
3530
3325

3750
3750
3610
3465
3325

3750
3750
3640
3530
3325

3750
3750
3640
3530
3325

3750
3750
3640
3530
3325

3600
3000
2690
2485
2330

3600
3095
2795
2570
2390

3600
3310
3085
2880
2710

3000
2590
2330
2110
1945

600
650
700
750
800

2840
2745
2665
2535
2055

2755
2665
2560
2385
1955

3025
2940
2775
2535
2055

2755
2665
2560
2385
1955

3025
2940
2840
2660
2540

3025
2940
2840
2660
2540

3025
2940
2840
2660
2540

3025
2940
2840
2660
2540

3025
2940
2840
2660
2540

2210
2160
2110
2065
2030

2255
2210
2170
2135
2110

2580
2530
2485
2460
2435

1800
2250
2225
2200
2160

850
900
950
1000
1050

1595
1150
685
430
-

1490
1010
685
430
-

1595
1115
685
430
-

1490
1010
685
430
-

2435
2245
1575
1010
790

2435
2245
1595
1080
720

2435
2245
1930
1335
875

2435
1870
1370
995
720

2435
2245
1885
1270
855

1980
1945
1910
1770
1630

2090
2075
1930
1820
1800

2425
2245
1930
1820
1800

1100
1150
1200
1250
1300

480
325
205
-

550
345
205
-

495
310
170
-

565
375
255
-

1285
1030
825
670
565

1525
1185
925
735
585

1560
1045
755
565
375

1350
1400
1450
1500

465
380
290
205

480
380
290
205

255
205
155
135

NOTE:
(1) For welding end valves only. Flanged end ratings terminate at 1000F.
NOTES:
(a) Permissible, but not recommended for prolonged usage above about 800F.
(b) Permissible, but not recommended for prolonged usage above about 850F.
(d) Not to be used over 650F.
(e) Not to be used over 700F.
(f) Not to be used over 800F.
(g) Not to be used over 850F.
(h) Not to be used over 1000F.
(i) Not to be used over 1050F.
(j) Not to be used over 1100F.
(l) Ratings apply for 300F and lower.

28

STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES

GATE VALVE O.S. & Y
1.0 Periodic Inspections
1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting
nuts to compress the packing. Do not over-tighten the adjusting nuts as this will make operation of the valve more difcult. If, after tightening
the adjusting nuts to their fullest extent, the leakage does not stop, it is then necessary to replace the stem packing. It is not recommended
that additional packing rings be added to the stufng box as this may cause damage to the stem sealing system. Please contact Bonney Forge
or its distributor for new stem packing sets. For packing replacement see paragraphs 2.2 and 2.3.
1.2 The lubrication of the yoke nut should be inspected at least monthly. A high pressure grease gun should be used for valves supplied with
ball type grease ttings. For valves supplied with a Stauffer type grease cup, the cup should be checked to assure that it is full so that the
grease can be injected by turning the screw cap. The valve stem threads should also be given a coating of lubricant.
1.3 Bonnet bolt tension should be checked periodically when valves are used in high temperature applications where creep may occur.
Although leaks through ring joints are rare, erosion or corrosion could cause rings to fail. In these cases, a new ring gasket is required.
2.0 Extraordinary Maintenance or Replacement of Damaged Parts
2.1 Stem. If the stem locks or "freezes", causes can generally be attributed to worn packing, a dry yoke nut or dry stem threads. In either of
these cases, the following service is required:
a*) Unscrew gland nuts, remove the gland ange and bushing to expose stem packing and lantern ring. Replace stem packing
if it is damaged.
b) Check lubrication of yoke nut. If it is dry, remove the yoke nut and determine if there is evidence of seizure marks. If so, replace it with a
new yoke nut. Also check the nut and stem threads.
2.2 Disassembly of Stem Packing.*
a) In those cases where the valve can not be removed from the piping system, it is important that prior to servicing, the valve be opened to
its fullest extent. Partially unscrew nuts to reduce the compression load on the stufng box. Remove the stem packing and then replace
with new set(s) of packing. Finally, tighten nuts sufciently while allowing the stem to operate smoothly.
b) To replace the stem when the valve is completely disassembled for general maintenance follow this procedure:
- Open the valve half way and remove bonnet bolts and nuts.
- Lift up the bonnet to remove the wedge.
- With the bonnet removed, unscrew the gland bolts and lift up the gland ange exposing the stem packing.
- Remove the stem packing.
- Remove the stem through the stufng box.
*CAUTION: Always be sure that the valve is de-pressurized and isolated prior to performing any maintenance work.

29

STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES

GATE VALVE O.S. & Y (CONTINUED)
2.3 The procedure to re-assembly the valve is as follows:
Re-insert the stem through the stufng box taking special care to reassemble parts in sequence. Insert the remaining packing rings into the
stufng box and compress using the gland and ange. Then, reassemble nuts and tighten. Note, the stem must slide freely through the stuffing box without applying excessive force. Finally, install the bonnet gasket making sure it is not damaged. The gasket should be replaced if
there is any question as to its performance.
2.4 Raise the bonnet, making sure the stem is in a half open position, then connect disc to stem. Lower bonnet on to the valve body making sure
that the disc ts exactly into body guides and the bonnet gasket is properly seated. Align holes and tighten bonnet nuts taking care that excessive
force is not used, possibly damaging the gasket. Hydrostatically test the valve to assure that there is no leakage.
2.5 Disassembly of yoke nut
When necessary use the following procedure for disassembling and replacing yoke nut:
a) direct hand-operated valves (handwheel)
- remove set screw;
- unscrew handwheel nut;
- remove handwheel;
- unscrew yoke nut retaining nut, removing spot welds if necessary;
Reverse the procedure for re-assembly.
b) bevel gear operated valves
- to remove the bevel gear from the valve, unscrew nuts and turn the handwheel in the open direction indicated by
the arrow until the drive nuts are disengaged from the stem.
- to check the condition of the drive nut or bearing, unscrew the retainer ring and remove the drive nut and bearing.
If damaged, a new drive nut or bearing is necessary.
2.6 Wedge and Seats
Leakage through seats and wedges is not always easy to spot when valves are in service. However, when leaks are
identied, immediate action is necessary. Any delay can permanently damage seat or wedge seal surfaces.
To repair or replace wedges or seats, the valve must be removed from the line and the following procedure should be applied:
- make sure that the valve is not under pressure before unscrewing bonnet nuts;
- remove the bonnet, being careful not to damage the gasket;
- remove the bonnet when the wedge is in the half open position;
- lift up the bonnet until the wedge is disconnected from the guides;
- release the wedge from the stem.
If seat surfaces show signs of seizing, pitting, grooves or other defects not deeper that 0.8 mm (1/32") it is possible to repair seating surfaces
to its original conditions by relapping the surface with line grain abrasive paste, creating a perfect tightness once again.
Defects having a depth exceeding 0.8 mm (1/32") cannot be repaired by lapping. In this case, parts must be replaced.
It is recommended that the face of the disc be blued to check for contact of seating surface after nal lapping. For re-assembly of valves use
the procedure outlined under para. 2.4.

30

GLOBE VALVE O.S. & Y

1.0 Periodic Inspections
1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the
adjusting nuts to compress the packing. Do not over-tighten the adjusting nuts as this will make operation of the valve more difcult. If, after
tightening the adjusting nuts to their fullest extent, the leakage does not stop, it is then necessary to replace the stem packing. It is not recommended that additional packing rings be added to the stufng box as this may cause damage to the stem sealing system. Please contact
Bonney Forge or its distributor for new stem packing sets. For packing replacement see paragraphs 2.2
and 2.3.
1.2 The lubrication of the yoke nut should be inspected at least monthly. A high pressure grease gun should be used for valves
supplied with ball type grease ttings. For valves supplied with a Stauffer type grease cup, the cup should be checked to assure
that it is full so that the grease can be injected by turning the screw cap. The valve stem threads should also be given a coating
of lubricant.
1.3 Bonnet bolt tension should be checked periodically when valves are used in high temperature applications where creep may
occur. Although leaks through ring joints are rare, erosion or corrosion could cause rings to fail. In these cases, a new ring gasket
is required.
2.0 Extraordinary Maintenance or Replacement of Damaged Parts
2.1 Stem. If the stem locks or freezes, causes can generally be attributed to worn packing, a dry yoke nut or dry stem threads. In either of
these cases, the following service is required:
a*) Unscrew gland nuts, remove gland ange and bushing to expose stem packing and lantern ring.
Replace stem packing if it is damaged.
b) Check lubrication of yoke nut. If it is dry, remove the yoke nut and determine if there is evidence of seizure marks.
If so, replace it with a new yoke nut. Also check the nut and stem threads.
2.2 Disassembly of Stem Packing.*
a) In those cases where the valve cannot be removed from the piping system, it is important that prior to servicing, the valve
be opened to its fullest extent. Partially unscrew nuts to reduce the compression load on the stufng box. Remove the stem
packing and then replace with new set(s) of packing. Reassemble plug and gland ange. Finally, tighten nuts sufciently
while allowing the stem to operate smoothly.
b) To replace the stem when the valve is completely disassembled for general maintenance follow this procedure:
- Open the valve and remove the bonnet bolts and nuts.
- With the bonnet removed, unscrew the gland bolts and lift up the gland ange exposing the stem packing.
- Remove the stem packing.
- Remove handwheel, then turn stem to release it from yoke nut and remove from stufng box.
- Check condition of back-seat bushing for seizure marks. If apparent, order replacement parts.
*CAUTION: Always be sure that the valve is de-pressurized and isolated prior to performing any maintenance work.

31

STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES

GLOBE VALVE O.S. & Y (CONTINUED)
2.3 The procedure to re-assembling the valve is as follows:
Re-insert the stem through the stufng box, taking special care to reassemble parts in sequence. Insert the remaining packing rings into the
stufng box and compress using the gland ring and ange. Then, reassemble nuts and tighten. Note, the stem must slide freely through the
stufng box without applying excessive force. Finally, install the bonnet gasket making sure it is not damaged. The gasket should be replaced
if there is any question as to its performance.
2.4 Raise the bonnet assembly, making sure the stem is in the fully open position. Lower bonnet on to the valve body making sure that the
disc ts exactly into body guides and the bonnet gasket is properly seated. Align holes and tighten bonnet nuts taking care that excessive
force is not used, possibly damaging the gasket. Hydrostatically test the valve to assure that there is no leakage.
2.5 Disassembly of yoke nut
When necessary use the following procedure for disassembling and replacing yoke nut:
a) direct hand-operated valves (handwheel)
- remove set screw;
- unscrew handwheel nut;
- remove handwheel;
- unscrew yoke nut retaining nut, removing spot welds if necessary;
- Reverse the procedure for re-assembly.
b) bevel gear operated valves
- to remove the bevel gear from the valve, unscrew nuts and turn the handwheel in the open direction indicated by
the arrow until the drive nuts are disengaged from the stem.
- to check the condition of the drive nut or bearing, unscrew the retainer ring and remove the drive nut and bearing.
If damaged, a new drive nut or bearing is necessary.
2.6 Disc and Seats
Leakage through disc and seats is not always easy to spot when valves are in service. However, when leaks are identied,
immediate action is necessary. Any delay can permanently damage seat or wedge seal surfaces.
To repair or replace the disc or seats, the valve must be removed from line, then use the following procedure:
- make sure that the valve is not under pressure before unscrewing bonnet nuts;
- remove bonnet, being careful not to damage the gasket;
- remove bonnet when disc is in full open position;
- lift up bonnet
If seat surfaces show signs of seizing, pitting, grooves or other defects not deeper that 1.5 mm (1/16") it is possible to repair seating surfaces
to its original conditions by relapping the surface with line grain abrasive paste, creating a perfect tightness once again. Defects having a
depth exceeding 1.5 mm (1/16") cannot be repaired by lapping. In this case, parts must be replaced.
It is recommended that the face of the disc be blued to check for contact of seating surface after nal lapping. For re-assembly of valves use
the procedure outlined under para. 2.4.

32

SWING CHECK VALVES

No periodic maintenance is necessary. If gasket leaks are detected, correct using the following procedure.
1 - Disassemble all cover bolts and nuts.
2 - For check valves in sizes 16" and larger, lift up the cover by using a lever inserted into the drilled and tapped cover hole.
For valves in sizes 14" and smaller, use one or two bolts and nuts inserted into cover holes and, using adequate force,
move the cover upwards.
3 - Check that the hinge, nut, and pin are in good condition and rmly connected. Replace damaged parts as necessary.
4 - Lift and remove the disc-hinge assembly. Movement should be free and not hindered by any malfunction of the hinge pin.
Where disc travel is not sufciently smooth, remove plugs or blind anges and then remove hinge pin. Check surface for
seizure marks. If marks are deeper than 1.5 mm (1/16"); re-machine hinge pin and re-assemble. If defect depth is greater
than 1.5 mm (1/16") a new hinge pin is necessary. When reassembling hinge pin, it is recommended that the disc be removed
by loosening nut.
5 - When leakage is due to deterioration of seal surfaces caused by corrosion or foreign substances, it must be determined
whether the disc or seat seal are the cause.
a)Deterioration of disc surfaces:
Disassemble disc by removing nut and washer. Repair surface by grinding and relapping using ne grain abrasive paste.
b) Deterioration of seat seal surfaces:
When seal surfaces are damaged and defects are conned to a small area but are not deeper than 0.8 mm (1/32"), the seal surface can be
repaired. The recommended method is to use a cast iron strap with an outside diameter matching the valves raceway. Then using a ne
grain abrasive paste between the strap and raceway, it is rotated on the seat to restore original tightness. When defects are deeper than 0.8
mm (1/32") and found on the entire seal surface, a new seat is required. To replace the new seat, use preferably a pneumatic tool with a
shape to match the dimensions of the valve seat. It is recommended that an anti seizing compound be used when installing the replacement seat to make threading it in to the body easier.
CAUTION: Always be sure that the valve is de-pressurized and isolated prior to performing any maintenance work.

33

STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES

HANDWHEEL NUT
HANDWHEEL

HANDWHEEL NUT
HANDWHEEL

YOKE SLEEVE
RETAINING NUT
NUT
GLAND FLANGE
GLAND
PACKING

YOKE SLEEVE RETAINING NUT

YOKE SLEEVE
YOKE SLEEVE BEARING
NUT
GLAND FLANGE
GLAND

SET
SCREW
PLATE

EYE BOLT
NUT
PACKING
BACK SEAT BUSHING
NUT
EYE BOLT
PIN
BONNET
STUD BOLT

NUT

PLATE

BONNET

BACK SEAT BUSHING

PLUG

PLUG

STUD
BOLT

PIN
BONNET GASKET
STEM

STEM
WEDGE

DISC NUT
HALF RING

SEAT RING
BONNET GASKET

BONNET GASKET

BODY

NUT

BODY

NUT

GATE VALVE
COMPONENTS

GLOBE VALVE
COMPONENTS

PIN
BONNET
STUD BOLT

GASKET

PIN
NUT
DISC WASHER

PLUG

HINGE DISC
DISC
SEAT RING

PLUG GASKET
NUT
BODY
PLUG

SWING CHECK
VALVE COMPONENTS

PLUG GASKET
HINGE PIN

34

NOTES

35

NOTES

36

GENERAL TERMS AND CONDITIONS OF SALE OF: BONNEY FORGE (HEREAFTER REFERRED TO AS BF)
WARRANTY

All products are warranted to be free from manufacturing defects for a period of one (1) year from date of shipment, and any found to be defective within
that period will be replaced without charge, provided (1) that the product was used as recommended and in accordance with approved installation and
operating practices. (2) that its failure resulted from a manufacturing defect and not from damage due to corrosive, abrasive, or other wear normally to be
expected in the services involved. (3) that the product was not modied or changed (unless written approval was give by BF), and (4) that written notice of
such defect is delivered to BF during such one (1) year period. BF will not be responsible for any labor, equipment, engineering or related costs or liability
associated with the replacement of a defective product. The Uniform Commercial Code shall not apply to the sale, nor the Michigan statutes adopting the
Uniform Commercial Code. This express warranty is in lieu of and excludes all other warranties, guarantees, or representations, expressed or implied. There
are no implied warranties of merchantability or of tness for a particular purpose.

EXCLUSIONS

Do not use BF products in aircraft or aerospace applications. No warranties, guarantees or representations of any kind are made with respect to such applications. The Purchaser assumes all risks of any use is such applications and will indemnify and hold harmless BF against and from any claims, costs
(including attorneys fees) and liabilities arising out of such use.

PURCHASERS
REMEDIES

The Purchasers remedies with respect to any product furnished by BF hereunder that is found not to be in conformity with the terms and conditions of the
contract because of breach of contract, breach of express or implied warranty, or negligence shall be limited exclusively to the right of replacement of such
defective product or, at our option, repayment of our sale price of the product. In no event shall BF be liable for claims (based upon breach of contract,
breach of express or implied warranty, or negligence) for any other damages, whether direct, immediate, foreseeable, consequential, or special or for any
expenses incurred by reason of the use or misuse, sale or fabrication of products which do or do not conform to the terms and conditions of the contract.

PRICES

Prices, and other terms of sale and payment, are subject to change without notice. Unless a contrary provision appears in this price schedule, quotation or
order acknowledgment, prices may be withdrawn without notice at any time. Stenographic or clerical errors are subject to correction.

ACCEPTANCE OF
ORDERS

All orders are subject to BF credit department approval prior to acceptance by BF. No assignment of the Purchasers rights may be made without the written
consent of BF.

REMITTANCES

All accounts are payable in United States funds, free of exchange, collection or any other charges. If in the sole discretion of BF the nancial condition of
the Purchaser at any time so requires, BF retains the right to require full or partial payment in advance.

PARTIAL
SHIPMENTS AND
PAYMENTS

BF reserves the right to make partial shipments from time to time and to render invoices therefore which shall be due and payable as provided in said
invoices and the paragraph entitled. Remittances if the Purchaser becomes overdue in any such partial payment, BF shall be entitled to suspend work
and or avail itself of other legal remedies.

TAXES

Unless otherwise specically noted, the amount of any sale, use , occupancy, excise tax or other tax, of any nature, federal, state, or local for which BF is
legally liable, either initially or through failure of payment by Purchaser, shall be added or be in addition to the price quoted and Purchaser agrees to pay
the same to BF.

SHORTAGES &
DAMAGES IN
TRANSIT

Claims for shortages must be made in writing within ten days after receipt of shipment, but loss of or damage to material in transit is the responsibility of
the carrier.

DELAYS

All promises of shipment are estimated as closely as possible, and we will use our best efforts to ship within the time promised but do not guarantee to do
so, and assume no liability for no doing so. Materials stated to be in stock are subject to prior sale.

CANCELLATION &
SUSPENSION

The order or contract is subject to cancellation or instructions to suspend or delay work or delivery only upon receipt of written notication and with our
consent, and upon agreement to pay BFs adjustment charge. Orders for special products ( usually price of application items) may be changed and
or cancelled only upon receipt of written instructions with a facit understanding and agreement to make payment for material used and work already
performed.

RETURN OF
MATERIAL

No product of our manufacture may be returned without written consent. All goods returned are subject to a handling charge plus freight in both directions
and charges for any required reconditioning, unless otherwise specied in writing by BF.

PATENTS

The Purchaser will indemnify and hold harmless BF against and from any claims, costs (including attorneys fees) and liabilities arising out of any suit
alleging infringement of any United States by any product supplied by BF under the contract and made in accordance with the design and or specication
furnished by the Purchaser to BF.

GOVERNING LAW

The contract shall be governed by, construed, and enforced in accordance with the laws of the Commonwealth of Pennsylvania.

NO WAIVER

The failure of BF to insist, in any one or more instances upon the performance of any of the terms, covenants, or conditions of the contract or to exercise
any right thereunder shall not be construed as a waiver or relinquishment of the future performance of any such term, covenant or condition or the future
exercise of such rights, nor shall it be deemed to be a waiver or relinquishment of any other term, covenant, or condition or the exercise of any other rights
under the contract.

DIES, TOOLS AND

PATTERNS

Dies, tools and patterns required to produce the article quoted on shall remain the property of BF. Preparation charges for dies, tools and patterns represent
only a portion of cost. Payment of such charge does not give you any right, title, or interest in such dies, tools, or other products of preparation. We will not
be responsible for retention of dies or patterns on which no orders are received for two years or more.

FORCE MAJEURE

Any delays in or failure of performance of BF shall not constitute default or give rise to any claims for damages if and to the extent that such delay or failure
is caused by occurrences beyond the control of BF, including but not limited to acts of God or the public enemy, expropriation or conscation of facilities,
compliance with any order or request of any governmental authority, acts of war, rebellion or sabotage or damage resulting therefrom, embargoes or other
export restrictions, res, oods, explosions, accidents, breakdowns, riots or strikes or other conceived acts of workmen, whether direct or indirect, or any
other causes whether or not of the same class or kind as those specically above named which are not within the control of BF and which by the exercise of
reasonable diligence, BF, is unable to prevent or provide against.

PURCHASERS
ACCEPTANCE
OF ABOVE
CONDITIONS

The contract shall be subject to the terms and conditions contained or referred to in BFs price schedule, quotation or order acknowledgment and to no
others whatsoever. No waiver, alteration, or modication of the terms and conditions in this price schedule, quotation or order acknowledgment shall be
binding unless in writing and signed by an authorized representative of BF.

Note: The material in this catalog is for general information. For specic performance data and proper material selection, consult your Bonney Forge representative.
Although every attempt has been made to ensure that the information contained in this catalog is correct, Bonney Forge reserves the right to change designs,
materials or specications without notice.

CVI-5M 12/06

Printed in U.S.A.