Scribd Logo
Upload

Welcome to Scribd!

  • 756 views

    Sika Seal 105

    Uploaded by

    Gabo Tellez
    Sika Seal(r) -105 combines the crystallization action (pore block) and the water proofing capability of polymer. It is used as an economical and easy to apply water proofing slurry, for both external and internal applications in generally wet areas.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Sika Seal 105

    Uploaded by

    Gabo Tellez
    756 views2 pages
    Sika Seal(r) -105 combines the crystallization action (pore block) and the water proofing capability of polymer. It is used as an economical and easy to apply water proofing slurry, for both external and internal applications in generally wet areas.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Sika Seal(r) -105 combines the crystallization action (pore block) and the water proofing capability of polymer. It is used as an economical and easy to apply water proofing slurry, for both external and internal applications in generally wet areas.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    756 views2 pages

    Sika Seal 105

    Uploaded by

    Gabo Tellez
    Sika Seal(r) -105 combines the crystallization action (pore block) and the water proofing capability of polymer. It is used as an economical and easy to apply water proofing slurry, for both external and internal applications in generally wet areas.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Product Data Sheet Edition 6, 2010 Version 04.

    06

    Sika Seal -105


    Multi-Purpose Water Proong Slurry
    Product
    Description A cement base, polymer modied, 2 component, multi-purpose water proong slurry. Sika Seal -105 combines the crystallization action (pore block) and the water proong capability of polymer. It Consists of special llers, cement and properly graded aggregates. Sika Seal -105 is used as an economical and easy to apply water proong slurry, for both external and internal applications in generally wet areas. Sika Seal -105 is suitable for the following applications: Water/sewage works, sewage treatment plants (such as tanks, digestors, clariers, etc...). Basements/lift pits. Retaining walls/bridge structures. Sea walls/irrigation channels. Swimming pools. Sika Seal -105 is part of a complete Sika System for the economical waterproong of water containment structures. Sika Seal -105 offers the following advantages: Pre-batched components (no water added). Multi-purpose water proong, crystallization and polymer modied cementitious slurry. Impermeable Brush or trowel applied. Good adhesion to sound surfaces. Produced under the exacting standards of Sika . For direct contact with drinking and sewage waters, Issued by The Egyptian National Organisation for Water and Sewage.

    Uses

    Construction

    Advantages

    Approvals / Tests

    Product Data
    Form Colour of Mix Packaging Storage Conditions Shelf Life Comp. (A): Liquid Comp. (B): Powder Grey White colour available upon request. 25 kg units (A+B). Store in dry conditions, protected from moisture and frost. 12 months from date of production if stored properly in undamaged and unopened original sealed packing.

    Technical Data
    Density Compressive Strength Flexural Strength Bond Strength Comp. (A+B) = 2. 0 kg/I After 28 days: 30-35 N/mm2 (ASTM-C-942-94) Note: compressive strength based on mortar consistency 1:4.5 by weight. After 28 days: 8-10 N/mm2 All results based on quality control. Lab condition to I.S.O. After 28 days: 7-8 N/mm2 (ASTM-C-580-94) (ASTM-C-1042-85)

    Sika Seal -105

    1/2

    Application Details
    Mixing Ratio Coverage Slurry (Comp. (A) : Comp. (B)) = 1 : 4 by weight. Mortar (Comp. (A) : Comp. (B)) = 1 : 4.5 by weight. Approx. 2 to 2.5 kg/m2 for two coats application depending on the surface and consistency required. Minimum two coats recommended on application. Concrete surfaces must be mechanically cleaned, free from oil grease and loosely adhering particles. On new or smooth faced concrete, surfaces should be sand blasted to provide an Open Pore Surface to enhance the effectiveness of the crystallization process. Non-sand blasted surfaces will affect the performance of the crystallization process and the bond of the cementitious slurry. All surfaces must be as true and at as possible. Saturate absorbent concrete surfaces thoroughly with water to achieve a surface saturated dry (SSD) condition. Place three quarters (3/4) of component (A) (liquid) in a suitable mixing container. Add component (B) (powder) to the liquid while mixing. Mechanical mixer must be used to ensure proper dispersion of component (B). After the entire component (B) has been added mix for an additional three minutes. The remaining one quarter (1/4) of component (A) is added during the addition of the component (B) to achieve the desired consistency. While the substrate is still in a SSD condition, apply the rst coat and leave to harden (4-6 hours). Apply the second coat as soon as possible, after hardening of the rst coat, to ensure proper adhesion between layers. For slurry consistency apply with a hard-bristle brush or broom. For the trowelable mortar use a notched trowel. After application of the second coat, nish Sika Seal -105 by rubbing down with a soft dry sponge. Clean all tools and equipment with clean water immediately after use. Hardened material can only be removed mechanically. 30 minutes

    Surface Preparation

    Construction

    Application
    Mixing

    Application

    Cleaning Pot Life (at 20 C)

    Important Considerations Sika Seal -105 will not bridge cracks or existing joints and has no added exibility to overcome micro-cracking in the concrete.

    Curing

    To ensure the optimal impact of the dual water proong capability of the Sika Seal -105, it should be moist cured for a minimum of 24 hours to initiate the crystallization process (pore block) and then mist cured for an additional 24 hours. When moist curing is not possible the water proong capability of the Sika Seal -105 is provided by the polymer modied cementitious slurry. Wear gloves and goggles. In contact with eyes or skin, product may cause irritation. Residues of material must be removed according to local regulations. Fully cured material can be disposed of as household waste under agreement with the responsible local authorities. Non-Toxic under relevant health and safety codes. Non-hazardous
    The information, and in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sikas recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of tness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.

    Safety Instructions
    Safety Precautions Ecology

    Toxicity Transport

    Legal notes

    Sika Seal -105

    2/2

    You might also like