NESUG 2010

Posters

Learn SAS in 50 minutes

Subhashree Singh, The Hartford, Hartford, CT

ABSTRACT
SAS is the leading business analytics software used in a variety of business domains such as Insurance, HealthCare, Pharmacy, Telecom etc. Very often, business analysts and other professionals with little or no programming experience are required to learn SAS. This paper will explain the key concepts and the minimum knowledge required to get started with SAS. The information presented in this paper will enable new SAS users to get up and running in a very short amount of time.

INTRODUCTION
The SAS software includes a number of different components such as Base SAS, SAS/STAT, SAS/GRAPH, SAS/AF etc. This paper will explain the key concepts of Base SAS to enable a novice to seamlessly get up to speed on SAS and perform most of the tasks that are expected of a beginner.

1. SAS AND ITS RULES

1.1 WHAT IS SAS? SAS stands for Statistical Analysis System. Useful for the following types of task: Data entry, retrieval, and management Report writing and graphics Statistical and mathematical analysis

1.2 UNDERSTANDING TERMS IN A SAS DATA STRUCTURE DATA VALUE: The basic unit of information. VARIABLE: A set of data values that describes a given attribute. 2 main types of variable types: numeric and character OBSERVATION: All the data values associated with a particular record. DATA SET: It is a collection of observation.

Figure:

NESUG 2010

Posters

1.3 RULES FOR SAS NAMES SAS variable/variable names must be between 1 and 32 characters long. The first character must be a letter or an underscore. Characters after the first may be letters, digits or underscores.

Example: NAME, _NAME_, FILE1, _NULL_ etc.

1.4 RULES FOR SAS STATEMENTS SAS statements may begin in any column of the line. SAS statements end with a semicolon (;). Some SAS statements consist of more than one line of commands. A SAS statement may continue over more than one line.

One or more blanks should be placed between items in SAS statements. If the items are special characters such as '=', '+', '$', the blanks are not necessary.

NESUG 2010

Posters

There are two major building blocks in SAS. DATA step SAS built in procedures

2. DATA STEP
Used for: Names the SAS data set and creates the dataset. In a Data step the following can be performed. defining the variables read input files assign values to the variables, creating new variables, merging two data sets formatting and labeling variables assignment of missing values.

If a variable is used in a SAS program but not initialized then SAS automatically assign a missing value to it. Numeric missing values are represented by a single period (.). Character missing values are represented by a single blank enclosed in quotes (' '). Syntax: DATA <SOMENAME>; The name should be 1-32 characters and must begin with a letter or underscore. Example: DATA EMPDAT; The following SAS statements can be used in a DATA step. 2.1 INFILE AND INPUT STATEMENT Used for: INFILE is used to read external files (such as mainframe file, text files, comma delimited files etc). INPUT is used to define names and order of variables for the SAS dataset. Syntax: INFILE file-specification <options>; INPUT variable variable_type column(s); Example1: DATA EMPFL; INFILE 'c:\emp\external\emp1.dat'; INPUT @001 EMPNO $CHAR6. @007 NAME $CHAR15. @022 AGE 3.; RUN; In this example external file emp1.data stored in the location c:\emp\external will be read and copied into SAS file EMPFL. Three variables EMPNO, NAME and AGE will be read.

NESUG 2010

Posters

2.2 SET STATEMENT Used for: Reads an existing SAS dataset or concatenating SAS datasets Syntax: SET <SAS dataset name> <OBS=n>; Where n is the number of observations you want to read from the file. Example1: Copies first 100 records of OLDFILE1 to NEWFILE. DATA NEWFILE; SET OLDFILE1 (OBS=100); RUN; Example2: Concatenate two datasets. Input SAS dataset:

SAS data set NWEST OBS STATE POP 1 2 WA 3.4 OR 2.1

SAS data set SWEST OBS STATE POP 1 2 NM AZ 1.1 1.8

DATA COMMON; SET NWEST SWEST; RUN;

Output SAS data set

SAS data set COMMON OBS STATE POP 1 2 3 4 WA 3.4 OR 2.1 NM 1.1 AZ 1.8

2.3 IF/THEN; ELSE; STATEMENT Used for: Used for conditional checking. Used in a data step. Syntax: IF expression THEN statement; <ELSE statement;>

NESUG 2010

Posters

Example: IF LANG='Spanish' or LANG='French' THEN NEWLANG='NotEngl'; ELSE NEWLANG='English'; Example 2: IF status=M' AND type=1 THEN count=count+1;

2.4 SUBSETTING IF STATEMENT Used for: To subset, or take a portion of the data set Syntax: IF var_name = somevalue1; IF var_name = somevalue2 THEN DELETE; Example: DATA FORGNER; IF LANG= ENGLISH; IF TAX < 20000 THEN DELETE; RUN; In the above example it will select all observations where LANG equals ENGLISH and where TAX greater than or equal to 20000. Notice that values for character variables must be enclosed in quotes and values must match exactly including case.

2.5 LIBNAME STATEMENT Used for: Associates a libref with a SAS library. Its kind of location pointer. This is generally used we want to save the SAS dataset in a permanent location. When a libref is not associated with SAS dataset, SAS assumes it is created or read from SAS work area which is temporary in nature. Syntax: LIBNAME libref <engine>'('SAS-data-library-1' <,...'SAS-data-library-n'> ) '; Example: In windows LIBNAME EMPLIB1 C:\data\SAS\EMPDATA; The path C:\data\SAS\EMPDATA will be assigned to libref EMPLIB1. Say there is a SAS dataset EMPDAT in that library, it can be access as, DATA EMPFILE1; SET EMPLIB1.EMPDAT; RUN; In Unix LIBNAME CLAIM \data\CL\CLAIM\INPUT; DATA CLAIM.LOSS_HISTORY; SET LOSS_TEMP; RUN; In this example the temporary file LOSS_TEMP will be stored in a permanent location \data\CL\CLAIM\INPUT with a new name LOSS_HISTORY.

NESUG 2010

Posters

2.6 MERGE STATEMENT Used for: Joins corresponding observations from two or more SAS data sets. Two types one to one, match merging. Syntax: DATA new-sasdataset; MERGE sasdsname1 sasdsname2 . sasdsnamen; BY var1 var2 varm; RUN; Input data sets must be sorted by the same BY variables before you can merge them. Usually merge statement followed by sort procedure.

Example: Merge the two files SURVY with NAMES by the variable NAME. DATA NEW; MERGE NAMES SURVY; BY NAME; RUN; SAS data set NAMES OBS NAME 1 2 3 4 5 JENNIFER MANUEL PAUL RENEE TONY GENDER F M M F M SAS data set SURVY OBS AGE 1 2 3 4 5 6 28 35 27 35 37 32 HEIGHT 64 60 72 54 56 68 NAME JENNIFER MANUEL PAUL RENEE RENEE TONY

SAS data set NEW OBS AGE 1 2 3 4 5 6 28 35 27 35 37 32 HEIGHT 64 60 72 54 56 68 NAME JENNIFER MANUEL PAUL RENEE RENEE TONY GENDER F M M F F M

NESUG 2010

Posters

3. SAS BUILT IN PROCEDURES

SAS provides large number of procedures which is invoked in a "PROC step" which starts with the keyword PROC. Some important SAS built in procedures are described in this section. 3.1 PROC CONTENTS Used for: Lists structure of a SAS dataset. It is very useful when you receive an existing SAS file from someone and you need to start working on it. Before you start you may want to see the structure of this file. Syntax: PROC CONTENTS DATA=<SAS dataset name> <options> ; RUN; Example: To list the structure of the SAS dataset EMPFL. PROC CONTENTS DATA=EMPFL; RUN; The following is the sample result. SAS also prints other metadata information such as FORMAT, INFORMAT, LABEL, no. of observations, SORT info, INDEX info etc which were not shown here. Please refer to online documentation for details. Alphabetic List of Variables and Attributes # 3 1 2 Variable AGE EMPNO NAME Type Num Char Char Len 8 6 15

3.2 PROC PRINT Used for: Lists data as a table of observations. Large datasets are very hard to visualize, so it is useful when you want to print couple of observations for some variables. Syntax: PROC PRINT <options>; VAR variable(s) <options>; RUN; Example: To print variables NAME, AGE and GENDER of SAS dataset FILE1. PROC PRINT DATA=FILE1; VAR NAME AGE GENDER; RUN; Output will look like: OBS 1 2 3 NAME KEVIN JANE MARY AGE 15 12 17 GENDER M F F

NESUG 2010

Posters

3.3 PROC DELETE Used for: Delete one or more SAS dataset. It is good programming practice to delete unwanted SAS datasets to increase SAS work space. Syntax: PROC DELETE DATA=<Data set name(s)>; RUN; Example: PROC DELETE DATA=OLDDATA1 CLAIM.OLDDATE2; RUN; The above statement temporary SAS datasets OLDDATE1 and permanent SAS dataset CLAIM.OLDDATA2 will be deleted. 3.4 PROC SORT Used for: To rearrange the observations in SAS datasets according to one or more variables. Syntax: PROC SORT <NODUP/NODUPKEY> DATA= SAS-file name <OUT=SAS-filename>; BY <descending> variable-1 <descending> variable-n; RUN; You can sort in ascending or descending order. Default is ascending. BY variables can be numeric or character. Example: PROC SORT DATA=ORIG OUT=SORTORIG; BY GENDER DESCENDING AGE; RUN; Sorts file first in ascending order of GENDER and within those categories, 1 (Male) and 2 (Female), the cases are further sorted in descending order of AGE. PROC SORT is used most often for sorting a data set so that other SAS procedures can process that data set in subsets using BY statements. Data sets must also be sorted before they can be merged or updated. 3.5 PROC FREQ Used for: The FREQ procedure produces one way to n-way frequency tables and creates distribution reports of the variable values. This procedure used for categorical data. Syntax: PROC FREQ <option>; BY variables; OUTPUT <OUT=SAS-data-set> <options>; TABLES requests </ options>; RUN; Example: Find out unique values of the variable department in SAS dataset EmpFile. PROC FREQ DATA= EmpFile; TABLES Department /OUT=Freq_Department; RUN; The FREQ Procedure Department Department Audit Finance Research Frequency 6 6 4 Percent 37.50 37.50 25.00 Cumulative Cumulative Frequency Percent 6 37.50 12 75.00 8 16 100.00

NESUG 2010

Posters

3.6 PROC MEANS Used for: The MEANS procedure summarizes data. It computes descriptive statistics for variables within groups of observations or across all observations. This procedure generally used for continuous data. Syntax: PROC MEANS <option(s)> <statistic-keyword(s)>; BY variable-1 ... variable-n>; CLASS variable(s) </ option(s)>; OUTPUT <OUT=SAS-data-set> <output-statistic>; RUN; Example: Find out no. of employees, average, maximum, minimum, sum of salary for EmpFile by department. PROC MEANS DATA= EmpFile N MEAN MAX MIN SUM; VAR salary; BY department; OUTPUT OUT=SumEmpFile; RUN; Remember to sort the file by variable department before using the variable in BY statement of proc mean as given below. PROC SORT DATA= EmpFile; BY department; RUN;

NESUG 2010

Posters

4. SOME IMPORTANT SAS FUNCTIONS

This section is for advance reading. For users benefit some important SAS functions are mentioned below which can be used in a data step. 4.1. DATE (): produces the current date as SAS date, value representing the number of days between January 1, 1960 and the current date. E.g., Today_Date = DATE(); The value of Today_Date will be 18499 which means August 25, 2010. Then a SAS data format can be used to read the date. Refer to PUT function for details. 4.2. DAY (DATE): It returns an Integer representing the day of the month from SAS DATE value. E.g. Day1=DAY(Today_Date); The value of Day1 will be 25. 4.3. MONTH (DATE): It returns the numeric value representing the month from SAS DATE value. E.g. Month1=MONTH(Today_Date); The value of Month1 will be 8. 4.4. YEAR (DATE): It returns the 4 digits numeric value representing the year from SAS DATE value. E.g. Year1=YEAR(Today_Date); The value of Year1 will be 2010. 4.5. LENGTH(argument): Calculate length of a variable or a constant. Default length of numeric variable is 8. E.g. String2='Rocky Hill'; Len1=LENGTH(String2); The value of Len1 will be 10 which is the length of the string Rocky Hill. 4.6. SUM(variable-1, variable-2, .,variable-n): Calculates sum of non-missing arguments. E.g. Num1=5; Num2=2.5; Sum1=SUM(Num1,Num2); The value of Sum1 will be 7.5 4.7. MIN(variable-1, variable-2, .,variable-n): Returns the value of the lowest of its non-missing arguments. E.g. Min1=MIN(9,0,-2,45); The value of Min1 will be -2 4.8. MAX(variable-1, variable-2, .,variable-n): Returns the value of the lowest of its non-missing arguments. E.g. Max1=MAX(9,0,-2,45); The value of Max1 will be 45 4.9. INT(argument): This function taken one numeric argument and returns integer portion of the argument. E.g. Int1= INT(332.502); The value of Int1 will be 332 4.10. CEIL(argument): The CEIL function returns the smallest integer that is greater than or equal to the argument. E.g. Ceil1=CEIL(9.231); Ceil2=CEIL(-9.231); The value of Ceil1 will be 10 and Ceil2 will be -9. 4.11. FLOOR(argument): The FLOOR function takes one numeric argument and returns the largest integer that is less than or equal to the argument. E.g. Floor1=FLOOR(9.231); Floor2=FLOOR(-9.231); The value of Floor1 will be 9 and Floor2 will be -10.

10

NESUG 2010

Posters

4.12. PUT (source,format) : Write the value of source with a specified format. PUT function is used to convert numeric value to a character value and also to format numeric and date variables into various formats. E.g. Date_Formatted = PUT(Today_Date,DDMMYY10.); Here DDMMYY10. is the DATE format. Please refer to SAS online documentation to get a list of various formats. The value of Date_Formatted will be 25/08/2010. 4.13. UPCASE(argument): Converts all letters in an argument to uppercase. E.g. String2='Rocky Hill'; Upcase1=UPCASE(String2); The value of Upcase1 will be ROCKY HILL. 4.14. LOWCASE(argument): Converts all letters in an argument to uppercase. E.g. String2='Rocky Hill'; Lowcase1=LOWCASE(String2); The value of Lowcase1 will be rocky hill. 4.15. CATS(variable-1, variable-2, .,variable-n) and ||: It removes leading and trailing blanks, and concatenates the arguments. || (two pipe signs) also can be use to concatenate multiple strings. Unlike CATS function || does not remove leading and trailing blanks. E.g. Var1="United "; Var2=" States"; Con1=CATS(Var1,Var2,"of America"); Con2='Var1 || Var2 || "of America"'; The value of Con1 will be UnitedStatesof America where as value of Con2 will be United Statesof America. 4.16. TRANWRD(source, target, replacement): TRANWRD replaces or removes all occurrences of a word in a string. E.g. OldText=This is OLD; OldWord=OLD; NewWord=NEW; NewText=TRANWRD(OldText,OldWord,NewWord); The value of NewText will be This is NEW. 4.17. SUBSTR (argument, position<, n>) : It returns the portion of the string specified in the argument from the position up to the number of characters specified by n. E.g. String1='THE HARTFORD'; SubString1=SUBSTR(String1,5,4); The value of SubString1 will be HART. 4.18. TRIM (argument): It copies a character argument removing any trailing elements. E.g. String3='SAS Institute '; Trim1=trim(String3); The value of Trim1 will be 'SAS Institute.

11

NESUG 2010

Posters

CONCLUSIONS
This paper is submitted to help out new SAS users to accustom them to SAS in less time.

REFERENCES:
http://support.sas.com/documentation/onlinedoc/91pdf/index.html

ACKNOWLEDGMENTS
Thanks to the SAS online support for prompt responses to my questions. Many thanks to Adil Khan for reviewing my paper and encourage me to write this paper. SAS and all other SAS Institute Inc. product or service names are registered trademarks or trademarks of SAS Institute Inc. in the USA and other countries. indicates USA registration. Other brand and product names are registered trademarks or trademarks of their respective companies.

CONTACT INFORMATION
Your comments and questions are valued and encouraged. Contact the author at: Subhashree Singh The Hartford One Hartford Plaza Hartford, CT 06155 Work Phone: 860-547-2398 Email: [email protected], [email protected]
************************************************

12