Scribd Logo
Upload

Welcome to Scribd!

  • 165 views

    KBPC 240d

    Uploaded by

    Angel Montellano
    KBPC Series NEMA-4X (IP-65) SCR DC Motor Speed and Torque Control is designed for applications requiring washdown watertight integrity. Standard features include armature Fusing, Electronic Start / Stop and LED Indicator Array for "Power On," "Overload" and "Stop" KBPC also contains jumper selections for AC Line Voltage (230 / 115), DC Armature Voltage (180 / 90) and feedback type (armature / tach

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    KBPC 240d

    Uploaded by

    Angel Montellano
    165 views2 pages
    KBPC Series NEMA-4X (IP-65) SCR DC Motor Speed and Torque Control is designed for applications requiring washdown watertight integrity. Standard features include armature Fusing, Electronic Start / Stop and LED Indicator Array for "Power On," "Overload" and "Stop" KBPC also contains jumper selections for AC Line Voltage (230 / 115), DC Armature Voltage (180 / 90) and feedback type (armature / tach

    Original Title

    kbpc_240d

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    KBPC Series NEMA-4X (IP-65) SCR DC Motor Speed and Torque Control is designed for applications requiring washdown watertight integrity. Standard features include armature Fusing, Electronic Start / Stop and LED Indicator Array for "Power On," "Overload" and "Stop" KBPC also contains jumper selections for AC Line Voltage (230 / 115), DC Armature Voltage (180 / 90) and feedback type (armature / tach

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    165 views2 pages

    KBPC 240d

    Uploaded by

    Angel Montellano
    KBPC Series NEMA-4X (IP-65) SCR DC Motor Speed and Torque Control is designed for applications requiring washdown watertight integrity. Standard features include armature Fusing, Electronic Start / Stop and LED Indicator Array for "Power On," "Overload" and "Stop" KBPC also contains jumper selections for AC Line Voltage (230 / 115), DC Armature Voltage (180 / 90) and feedback type (armature / tach

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    DATA SHEET D-212

    KBPC-240D
    PENTA-DRIVE NEMA-4X, IP-65
    TM

    Variable Speed-Torque SCR DC Motor Control for Shunt Wound and PM Motors
    ONE MODEL COVERS: 1/50 1 Hp @ 115 VAC 50/60 Hz 1/25 2 Hp @ 230 VAC 50/60 Hz Washdown and Watertight for Indoor and Outdoor Use STANDARD FEATURES
    Electronic Overload Protection Built-in Armature Fusingv LEDs for Power On, Overload and Stop Electronic Start-Stop
    v

    DESCRIPTION The KBPC Series NEMA-4X (IP-65) SCR DC Motor Speed and Torque Control is designed for applications requiring washdown watertight integrity. Its housing is ruggedly constructed of die cast aluminum which is protected with an acrylic coating for the ultimate in corrosion resistance. All switches are sealed with rubber boots and the main speed potentiometer contains a shaft seal. The KBPC state-of-the-art electronics include short circuit and transient protection to provide the ultimate in reliability. Electronics overload protection is also provided which prevents motor burnout and demagnetization of PM motors. The control can be operated in either the speed or torque mode via a jumper selection. The current range, which is also jumper selectable, eliminates the necessity for calibration of IR compensation and current limit for most applications. The KBPC also contains jumper selections for AC line voltage (230/115), DC armature voltage (180/90) and feedback type (armature/tachometer). Standard features include Armature Fusing, Electronic Start/Stop and LED Indicator Array for Power On, Stop and Overload. Although the KBPC is factory set for most applications, a variety of trimpots allows adjustment of the following parameters: MIN and MAX speed, Acceleration, Deceleration, Current Limit, IR Comp, and Timed Current Limit. The drive offers the ultimate in flexibility with the availability of several customer installed options. These include: Anti Plug Reversing Module, Forward-Brake-Reverse with Hesitation Feature, Run Stop-Jog, On/Off AC Line Switch, Input Signal Isolation, and Electronic Potentiometer. A complete instruction manual is included.

    Fuse supplied separately

    JUMPER SELECTABLE FEATURES


    Control Mode: Speed, Torque DC Current Output (ADC): 2.5, 5.0, 7.5, 10 AC Line Voltage (VAC-50/60 Hz): 115, 230 DC Armature Voltage (VDC): 90, 180 Feedback Type: Armature, Tachometer Tachometer Voltagev (VDC): 7, 20/30, 50 Timed Current Limit: TCL, NTCL
    Bold figure indicates factory setting. v Per 1,000 RPM

    TRIMPOT ADJUSTMENTS
    Minimum Speed (MIN) Current Limit (CL) Acceleration (ACCEL) Timed Current Limit (TCL)
    v

    Maximum Speed (MAX) IR Compensation (IR) Deceleration (DECEL) Jog Speed (JOG)v

    Used with Run-Stop-Jog option.

    OPTIONAL FEATURES
    Forward-Brake-Reverse Switch with hesitation feature (P/N 9339). Includes switch and prewired dynamic brake resistor. Run-Stop-Jog Switch (P/N 9340) Signal Isolator, KBSI-240D (P/N 9431) On/Off AC Line Switch (P/N 9341) White Case (FDA) (P/N 9342) Electronic Pot, KBEP-240D (P/N 9108) Anti Plug Reversing Module (P/N 9378) Auto/Manual Kit (P/N 9377)
    * CE Compliance Requires KBRF-200A RFI Filter

    TM

    40

    A Complete Line of Motor Drives

    Rev.______(A_______)

    SPECIFICATIONS
    Parameter Specification Factory Setting Parameter Specification Factory Setting

    AC Line Voltage Regulation (% Base Speed).............. 0.5 .............. Current Ranges (ADC) ........................................ 2.5, 5, 7.5, 10 ...... 10 ACCEL and DECEL Ranges (Seconds) .................... 0.115 ............ 1 MIN SPEED Range (% Base Speed) ........................ 030 .............. 0 MAX SPEED Range (% Base Speed) ...................... 60140 .......... 100 IR COMP Range at 115 VAC Line (VDC) .................. 015 .............. 4 IR COMP Range at 230 VAC Line (VDC) .................. 030 .............. 8 CL Range (% Range Setting) .................................... 0200 ............ 150 TIMED CL Range (Seconds) .................................... 0.515 ............ 7 Voltage Following Linearity (% Base Speed) .............. 0.5 .............. AC Line Voltage (VAC 10%, 50/60 Hz)................ 115 or 230 ........ 230

    Horsepower Range at 115 VAC Line (Hp) [kw].... 1/501, [.015-.75].... Horsepower Range at 230 VAC Line (Hp) [kw] .... 1/252, [.031.5].... Armature Voltage Range at 115 VAC Line (VDC) .......... 0130*............ Armature Voltage Range at 230 VAC Line (VDC) .......... 0220* .......... 180 Field Voltage at 115 VAC Line (VDC) .......................... 100/50** .......... Field Voltage at 230 VAC Line (VDC) .......................... 200/100**.......... Ambient Temperature Range (C) .................................. 050.............. Speed Range (Ratio)........................................................ 50:1 .............. Load Regulation, Arm. Feedback(% Base Speed) ............ 1 .............. Load Regulation, Tach. Feedback (% Set Speed).............. 1 ..............

    NOTES: *Maximum recommended output voltage is 90 VDC for 115 VAC and 180 VDC for 230 VAC. Exceeding these output voltages may cause a reduction in load regulation performance. **For shunt wound motor with lower voltage field, use L1 and F1 connection.

    ELECTRICAL RATINGS
    Model Number KB Part Number AC Line Voltage (VAC) 10% 50/60 Hz Motor Voltage (VDC) Max. AC Load Current (RMS Amps) Max. DC Load Current (DC Amps) Maximum Horsepower Hp, (KW) Field Voltage** (Volts DC) Terminals F1, F2 Terminals F1, L1

    9338 (Black) KBPC-240D 9342 (White) 115/230

    0 130 0 180 0 130*

    15.0 15.0

    10.2 10.2

    1, (.75) 2, (1.5)

    100 200

    50 100

    *Stepdown operation (90 VDC motors with 230 VAC input) can cause a reduction in motor performance. **Shunt motors only

    MECHANICAL SPECIFICATIONS
    5.886 (149.50) _ 0.25" MOUNTING SCREWS 5.472 (139.00)

    INCHES [mm]

    CONNECTION DIAGRAM
    LED BOARD

    MAIN BOARD
    ON
    2.736 (69.50)

    STOP

    CL

    J5 TCL INHIBIT WHT START BLK I1 10V 5V I2 START COM


    JOG TCL

    YGRB

    NTCL

    J7

    CL

    ON

    STOP

    OL

    RED STOP START/STOP SWITCH VLT ORN

    IR

    STOP JOG P3
    DECEL ACCEL

    J4 TRQ SPD J1 10A 7.5A 5A 2.54

    PENTA-DRIVE

    TM

    WHT MAIN POTENTIOMETER TB3

    P2 P1 CONN1 T+
    MIN MAX

    DC MOTOR SPEED CONTROL

    40 30

    50

    60 70 80 90

    TACH INPUT

    T50V 20/30V 7V 180V 90V T J3 R69 L1B T1 J9A L1A J2A A1B J8A J2B 230V 115V 115V 230V

    8.228 (209.00) 8.875 (225.50) 9.488 (241.00)

    20 10 0
    FWD BRK REV

    J6

    100

    F1 ARM FUSE

    NEMA-IV / IP-65

    A1A
    F1 F2

    CONN2

    A2B J8B A2A

    START

    RUN

    F1 F2 TB2
    STOP JOG
    TM

    A1

    A2

    L1

    L2

    L2A J9B (2) TB1 L2B

    + FIELD
    MAXIMUM DEPTH 5.000 (127.00)

    FIELD CONNECTION USED ON SHUNT MOTORS ONLY. MOTORS WITH HALF VOLTAGE FIELD USE F1 AND L1. FIELD (*) ARMATURE
    AC LINE INPUT

    DWG#: C2800-1-00413

    DWG#: B2800-2-00359H

    1998 KB Electronics, Inc.

    KB ELECTRONICS, INC.
    12095 NW 39th Street, Coral Springs, FL 33065-2516 (954) 346-4900 FAX (954) 346-3377 Outside Florida Call TOLL FREE (800) 221-6570 www.kbelectronics.com Rev.______(A_______) 41

    You might also like