Miniature Aluminum Electrolytic Capacitors NRSY Series

REDUCED SIZE, LOW IMPEDANCE, RADIAL LEADS, POLARIZED

ALUMINUM ELECTROLYTIC CAPACITORS
RoHS
FEATURES Compliant
• FURTHER REDUCED SIZING includes all homogeneous materials

• LOW IMPEDANCE AT HIGH FREQUENCY

*See Part Number System for Details
• IDEALLY FOR SWITCHERS AND CONVERTERS
CHARACTERISTICS
Rated Voltage Range 6.3 ~ 50Vdc
Capacitance Range 0.47 ~ 15,000μF
Operating Temperature Range -55 ~ +105°C
Capacitance Tolerance ±20%(M)
Max. Leakage Current
0.01CV or 3μA, whichever is greater
After 2 minutes At +20°C
W.V. (Vdc) 6.3 10 16 25 35 50
S.V. (Vdc) 8 13 20 32 44 63
C < 1,000μF 0.28 0.24 0.20 0.16 0.14 0.12
C = 2,200μF 0.30 0.26 0.22 0.18 0.16 0.14
Max. Tan δ @ 120Hz/+20°C C = 3,300μF 0.32 0.28 0.24 0.20 0.18 -
C = 4,700μF 0.34 0.30 0.26 0.22 - -
C = 6,800μF 0.38 0.34 0.30 - - -
C = 10,000μF 0.56 0.42 - - - -
C = 15,000μF 0.56 - - - - -
Low Temperature Stability Z-40°C/Z+20°C 3 3 2 2 2 2
Impedance Ratio @ 120Hz Z-55°C/Z+20°C 6 5 4 4 3 3

Load Life Test at Rated W.V. Capacitance Change Within ±25% of initial measured value
+105°C 1,000 Hours = 8φ or less
Tan δ Less than 200% of specified maximum value
+105°C 2,000 Hours = 10φ
+105°C 3,000 Hours = 12.5φ up Leakage Current Less than specified maximum value

STANDARD PRODUCT AND CASE SIZE TABLE D φ x L (mm) LEADSPACE AND DIAMETER (mm)
Working Voltage (Vdc) Case Dia. (Dφ) 5 6.3 8 10 12.5 16
Cap. (μF) Code
6.3 10 16 25 35 50 Lead Dia. (dφ) 0.5 0.5 0.6 0.6 0.6 0.8
0.47 R47 - - - - - 5x11 Lead Spacing (F) 2.0 2.5 3.5 5.0 5.0 7.5
1.0 1R0 - - - - - 5x11 Dim. α 0.5 0.5 0.5 0.5 0.5 0.5
2.2 2R2 - - - - - 5x11
Insulation Sleeve dφ ± 0.05
Polarity Marking
3.3 3R3 - - - - - 5x11
4.7 4R7 - - - - - 5x11
F ± 0.5
10 100 - - - - - 5x11
22 220 - - - - - 5x11
33 330 - - - - 5x11 5x11
L + β max. 15mm Min. 4mm Dφ ± α
47 470 - - - - 5x11 6.3x11 Min.
100 101 - - 5x11 6.3x11 6.3x11 8x11.5
220 221 5x11 6.3x11 6.3x11 8x11.5 8x11.5 10x12.5
β = L < 20mm = 1.5mm, L > 20mm = 2.0mm
330 331 6.3x11 6.3x11 8x11.5 8x11.5 10x12.5 10x16 Drawing is representative of parts as supplied in bulk or
470 471 6.3x11 8x11.5 8x11.5 10x12.5 10x16 10x20 straight lead format, please see taping specification for
details on taped format packaging.
1000 102 8x11.5 10x12.5 10x16 10x20 12.5x20 12.5x25
2200 222 10x16 10x20 12.5x20 12.5x25 16x25 16x31.5
3300 332 10x20 12.5x20 12.5x25 16x25 16x35.5 -
4700 472 12.5x20 12.5x25 16x25 16x31.5 - -
6800 682 12.5x25 16x25 16x31.5 - - -
10000 103 16x25 16x31.5 - - - -
15000 153 16x35.5 - - - - -

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

180
Miniature Aluminum Electrolytic Capacitors NRSY Series
STANDARD PRODUCT, SPECIFICATIONS AND CASE SIZES D φ x L (mm)
Max. Impedance Max. Ripple Current at
Cap. W.V. Max. Max. LC Load Life Hours
Part Number 10KHz~200KHz/105°C
(μF) (Vdc) Tanδ (μA) 100KHz/20°C @ +105°C
(mA rms)
NRSY221M6.3V5x11F 220 0.28 13.86 0.50 180 1000
NRSY331M6.3V6.3x11F 330 0.28 20.79 0.30 280 1000
NRSY471M6.3V6.3x11F 470 0.28 29.61 0.24 280 1000
NRSY102M6.3V8x11.5F 1000 0.28 63 0.15 560 1000
NRSY222M6.3V10x16F 2200 0.30 138.6 0.066 950 2000
6.3
NRSY332M6.3V10x20F 3300 0.32 207.9 0.047 1150 2000
NRSY472M6.3V12.5x20F 4700 0.34 296.1 0.042 1460 3000
NRSY682M6.3V12.5x25F 6800 0.38 428.4 0.031 1780 3000
NRSY103M6.3V16x25F 10000 0.56 630 0.026 2000 3000
NRSY153M6.3V16x35.5F 15000 0.56 945 0.022 2200 3000
NRSY221M10V6.3x11F 220 0.24 22 0.30 280 1000
NRSY331M10V6.3x11F 330 0.24 33 0.24 280 1000
NRSY471M10V8x11.5F 470 0.24 47 0.16 410 1000
NRSY102M10V10x12.5F 1000 0.24 100 0.086 710 2000
NRSY222M10V10x20F 2200 10 0.26 220 0.047 1150 2000
NRSY332M10V12.5x20F 3300 0.28 330 0.042 1460 3000
NRSY472M10V12.5x25F 4700 0.30 470 0.031 1780 3000
NRSY682M10V16x25F 6800 0.34 680 0.026 2000 3000
NRSY103M10V16x31.5F 10000 0.42 1000 0.022 2200 3000
NRSY101M16V5x11F 100 0.20 16 0.50 180 1000
NRSY221M16V6.3x11F 220 0.20 35.2 0.24 280 1000
NRSY331M16V8x11.5F 330 0.20 52.8 0.16 410 1000
NRSY471M16V8x11.5F 470 0.20 75.2 0.15 560 1000
NRSY102M16V10x16F 1000 16 0.20 160 0.06 950 2000
NRSY222M16V12.5x20F 2200 0.22 352 0.042 1460 3000
NRSY332M16V12.5x25F 3300 0.24 528 0.040 1650 3000
NRSY472M16V16x25F 4700 0.26 752 0.026 2000 3000
NRSY682M16V16x31.5F 6800 0.30 1088 0.022 2200 3000
NRSY101M25V6.3x11F 100 0.16 25 0.30 280 1000
NRSY221M25V8x11.5F 220 0.16 55 0.16 410 1000
NRSY331M25V8x11.5F 330 0.16 82.5 0.15 510 1000
NRSY471M25V10x12.5F 470 0.16 117.5 0.086 710 2000
25
NRSY102M25V10x20F 1000 0.16 250 0.047 1150 2000
NRSY222M25V12.5x25F 2200 0.18 550 0.040 1650 3000
NRSY332M25V16x25F 3300 0.20 825 0.026 2000 3000
NRSY472M25V16x31.5F 4700 0.22 1175 0.022 2200 3000
NRSY330M35V5x11F 33 0.14 11.55 0.72 180 1000
NRSY470M35V5x11F 47 0.14 16.45 0.50 180 1000
NRSY101M35V6.3x11F 100 0.14 35 0.24 280 1000
NRSY221M35V8x11.5F 220 0.14 77 0.15 560 1000
NRSY331M35V10x12.5F 330 35 0.14 115.5 0.086 710 2000
NRSY471M35V10x16F 470 0.14 164.5 0.066 950 2000
NRSY102M35V12.5x20F 1000 0.14 350 0.042 1460 3000
NRSY222M35V16x25F 2200 0.16 770 0.026 2000 3000
NRSY332M35V16x35.5F 3300 0.18 1155 0.022 2200 3000
For Automotive Applications see part number system

PART NUMBER SYSTEM

NRSY 102 M 16V 10X25 TB Y F...
RoHS Compliant

TB = Tape & Box*

Case Size (Dφ x L)
Working Voltage (Vdc)
Tolerance Code (M=20%)
Capacitance Code: First 2 characters
significant, third character is multiplier
Series
*see taping specifications for details

Optional: For automotive equipment, sourced to special

production and inspection at TS-16949 certified production site

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

181
 Miniature Aluminum Electrolytic Capacitors NRSY Series

Max. Impedance Max. Ripple Current at

Cap. W.V. Max. Max. LC Load Life Hours
Part Number 10KHz~200KHz/105°C
(μF) (Vdc) Tanδ (μA) 100KHz/20°C @ +105°C
(mA rms)
NRSYR47M50V5x11F 0.47 0.12 3.0 5.50 20 1000
NRSY1R0M50V5x11F 1.0 0.12 3.0 3.30 30 1000
NRSY2R2M50V5x11F 2.2 0.12 3.0 3.00 45 1000
NRSY3R3M50V5x11F 3.3 0.12 3.0 2.70 55 1000
NRSY4R7M50V5x11F 4.7 0.12 3.0 2.00 90 1000
NRSY100M50V5x11F 10 0.12 5.0 1.70 110 1000
NRSY220M50V5x11F 22 0.12 11 1.20 120 1000
NRSY330M50V5x11F 33 50 0.12 16.5 0.95 130 1000
NRSY470M50V6.3x11F 47 0.12 23.5 0.56 190 1000
NRSY101M50V8x11.5F 100 0.12 50 0.30 320 1000
NRSY221M50V10x12.5F 220 0.12 110 0.16 520 2000
NRSY331M50V10x16F 330 0.12 165 0.12 670 2000
NRSY471M50V10x20F 470 0.12 235 0.088 820 2000
NRSY102M50V12.5x25F 1000 0.12 500 0.053 1200 3000
NRSY222M50V16x31.5F 2200 0.14 1100 0.029 1750 3000
For Automotive Applications see part number system

RIPPLE CURRENT CORRECTION FACTOR

Frequency (Hz) 100 < f < 1K 1K < f < 10K 10K < f
22 < C < 100 0.55 0.8 1.0
100 < C < 1000 0.7 0.9 1.0
1000 < C 0.9 0.95 1.0

PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specific application - process details with
NIC’s technical support personnel: [email protected]

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

182
 Miniature Aluminum Electrolytic Capacitors Taping Specifications

STANDARD RADIAL TAPING (5mm LEAD SPACING, FORMED LEADS) TB

Taping Dimensions (mm)
Case Dia.
4 5 6.3 8 P2 P
(Dφ)
Case Size 4x5 5x5 6.3x5
5x11 6.3x11 8x11.5
Dim. 4x7 5x7 6.3x7
∅D
dφ ±0.05 0.45 0.45 0.5 0.45 0.5 0.6
H ±0.75 17.5 17.5 18.5 17.5 18.5 20.0 w2 P1
F +0.8 ~ -0.2 5.0 -02 ~ +0.8
F ∅d
W H0 H
P 12.7 ±1.0 w0
w
P0 12.7 ±0.2
P1 3.85 ±0.5 (at end of tape)
0
P
2
6.35 ±1.0 Δh
P0 S ∅D
W 18.0 ±0.5 0

W 11.5 min.
0
W1 9.0 ±0.5
W2 0 ~ 2.5 1max

H 16.0 ±0.5
0
I 1.0 max.
D φ 4.0 ±0.2
0
Δh 0 ±1.0 (at top of can)
t 0.7 ±0.2 (not including lead)
t
STANDARD RADIAL TAPING (5mm LEAD SPACING, STRAIGHT LEADS) TB
Taping Dimensions (mm)
Case Dia.
10 12.5
(Dφ)
Case Size Δh
All All
Dim.
dφ ±0.05 0.6 0.6
H ±0.75 19.0 19.0
F +0.8 ~ -0.2 5.0 5.0
P ±1.0 25.4* 1max
P0 12.7 ±0.2
P1 3.85
P 6.35 ±1.0
2
W 18.0 ±0.5
W0 11.5 min
W
1
9.0 ±0.5 P2 t P
W 0 ~ 2.5
2
H
0 16.0 ±0.5 ∅D
I 1.0 max.
D φ 4.0 ±0.2 w2 P1
0 F ∅d H
Δh 0 ±1.0 (at top of can)
W1
t 0.7 ±0.2 (not including lead) w w0
*Optional Taping Specifications
10mm diameter available with P dim. = 12.7mm
(P/N Suffix: TB12.7MMP)
0
P0 S ∅ D0
12.5mm diameter available with P dim. = 15mm, P1= 5.0mm,
P0 = 15.0mm & P2 = 7.5mm (P/N Suffix: TB15MMP)

NOTE: ANODE (+) LEAD FEEDS OFF FIRST.

FOR OPTION OF NEGATIVE (_) LEAD FIRST,
SPECIFY “TBN”.

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

198
Miniature Aluminum Electrolytic Capacitors Taping Specifications

SPECIAL RADIAL TAPING (2.5mm LEAD SPACING, FORMED LEADS) TBF1

Taping Dimensions (mm)
Case Dia.
4 5
(Dφ)
Case Size 4x5 5x5 Δh
5x11 P2 P
Dim. 4x7 5x7
dφ ±0.05 0.45 0.45 0.5
H ±0.75 17.5 17.5 18.5 ∅D
H0 ±0.5 16.0 - - 1max
w2 P1
F 2.5 -02 ~ +0.8 F ∅d
P 12.7 ±1.0
W H0 H
P0 12.7 ±0.2 w w0
P1 5.1 ±0.5
P2 6.35 ±1.0
W 18.0 ±0.5 0
W0 11.5 min.
P0 S ∅D t
0
W1 9.0 ±0.5
W2 0 ~ 1.5
I 1.0 max.
D0φ 4.0 ±0.2
Δh 0 ±1.0
t 0.7 ±0.2

SPECIAL STRAIGHT LEAD TAPING TBST

Taping Dimensions (mm)
Case Dia.
(Dφ)
4 5 6.3 8 Δh
Case Size 4x5 5x5 6.3x5
5x11 6.3x11 8x11.5
Dim. 4x7 5x7 6.3x7
dφ ±0.05 0.45 0.45 0.5 0.45 0.5 0.6
H ±0.75 17.5 17.5 18.5 17.5 18.5 20.0
1max
F +0.8 ~ -0.2 2.0* 2.0 2.0 2.5 2.5 3.5
P ±1.0 12.7 ±0.2
P0 12.7 ±0.2
P 5.1 5.1 5.1 5.1 5.1 4.6
1
P 6.35 ±1.0
2
W 18.0 ±0.5
W 11.5 min. P2 t P
0
W1 9.0 ±0.5
W 0 ~ 2.5 ∅D
2
H 16.0 ±0.5
0
w2 P1
I 1.0 max. F ∅d H
D φ 4.0 ±0.2 W1
0 w w0
Δh 0 ±1.0 (at top of can)
t 0.7 ±0.2 (not including lead)
* Parts with 4mm diameter are taped with a slight flare in the 0
lead and a 2.0mm lead-space.
P0 S ∅ D0

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

199
 Miniature Aluminum Electrolytic Capacitors Taping Specifications

RADIAL TAPED PACKAGING

Ammo Box (Tape & Box) TB, TBF1, TBST

Size of box and component quantity
Ammo Box Dimensions (mm) Q'ty per
Case Dia (Dφ) Dim.
Box Dim. L Dim. H
or Case Size W
Scored corner (pcs)
4x5, 4x7 2,000 331 175 43
5x5, 5x7 2,000 331 220 43
5x11 2,000 340 255 55
Label 6.3x5, 6.3x7 2,000 331 280 43
⊕
- H 6.3x11 2,000 331 280 48
8x11.5, 8x12.5 1,000 335 235 53
10x12.5* 500 335 190 53
10x16* 500 335 300 53
W
L 10x20* 500 335 300 55
12.x20* 500 335 300 55
12.5x25* 500 335 300 61
*Special Taping Consult Factory For Availability

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

200