Project: Pillowcase With Checkerboard Band: Pattern 6

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

American Patchwork & Quilting | Quilt Sampler | Quilts and More

Project: Pillowcase with Checkerboard Band

Pattern 6

Pattern may be downloaded for personal use only. No electronic or printed reproduction permitted without the prior written consent of Meredith Corporation. Meredith Corporation 2010. All rights reserved.

American Patchwork & Quilting | Quilt Sampler | Quilts and More

Project: Pillowcase with Checkerboard Band Materials Assemble Band Assemble Pillowcase

For one pillowcase: 14 yard print No.1 (blocks) 3 8 yard print No.2 (blocks) 7 8 yard print No.3 (pillowcase body) Finished pillowcase: 30 20" (fits a standard-size bed pillow) Quantities are for 44/45"-wide, 100% cotton fabrics. Measurements include 1 4" seam allowances for piecing blocks and 1 2" seam allowances for pillowcase construction. Sew with right sides together unless otherwise stated.

Use a 1 4" seam allowance for the following steps.


1. Referring to Diagram1, sew

Use a 1 2" seam allowance for the following steps, except where noted.
1. Fold print No.3253441"

together two print No. 13" squares and two print No. 23" squares in pairs. Press seams in opposite directions. Join pairs to make a Four-Patch unit. Press seam in one direction. The unit should be 51 2" square including seam allowances. Repeat to make eight Four-Patch units total.
2. Join Four-Patch units to make

rectangle in half to form a 2534 201 2" rectangle. Sew together long edges and one pair of short edges to make pillowcase body. Turn right side out and press flat.

2. Matching raw edges, slide

From print No.1, cut 163" squares From print No.2, cut: 151 2401 2" strip 163" squares From print No.3, cut: 1253441" rectangle

Cut Fabrics

a checkerboard strip (Band Assembly Diagram). The checkerboard strip should be 51 2401 2" including seam allowances.
3. Referring to Band Assembly

pillowcase band over pillowcase body with Four-Patch units facing pillowcase body; pin. Using a 1 4" seam allowance, sew together through all layers (Diagram2).
3. Press pillowcase band open,
Million Pillowcase Challenge

Diagram, sew print No.251 2401 2" strip to one long edge of checkerboard strip.
4. Join short ends of Step 3 unit

pressing CMR seams 3765341 toward MID 3725384 Pillowcase 4 with hourglass 1 block pillowcase body. Topstitch 8" band Diagram 2 C. Neubauer 9-15-09 from band edge on pillowcase 100526205 body to secure seam allowances and complete pillowcase (Diagram3).
Fabrics are from the Floral Vignettes collection by Paintbrush Studio (fabri-quilt.com).

to make a loop. Fold loop in half with wrong side inside; press to make pillowcase band.

DIAGRAM 1

DIAGRAM 2

DIAGRAM 3

5124012" BAND ASSEMBLY DIAGRAM

Pattern may be downloaded for personal use only. No electronic or printed reproduction permitted without the prior written consent of Meredith Corporation. Meredith Corporation 2010. All rights reserved.

You might also like