Coated Mesh Brochure 0416D

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

Omega 3 Fatty Acid (O3FA ) Bioabsorbable Coated Mesh

SUPERIOR HEALING WITH OMEGA 3 TECHNOLOGY


Atriums C-QUR Family of soft tissue repair products combine the clinically proven ProLite polypropylene with an advanced Omega 3 fatty acid (O3FA) coating technology to provide patients with a durable, long lasting repair, and a more natural healing experience.
Figure 1

In pre-clinical studies, the Omega 3 fatty acid coated polypropylene mesh exhibited signicantly less inflammatory cell recruitment than bare polymer, uncoated polypropylene mesh products, resulting in a more complete and fully incorporated repair (fig. 1).

Histology shows complete tissue incorporation with minimal inflammatory response.

Check Out Our Family of Products to Suit All Your Hernia Mesh Needs
FAVORABLE CLINICAL OUTCOMES
Additionally, C-QUR has compared favorably in both clinical and pre-clinical studies to several commercially available products commonly used for intraperitoneal hernia repair. When evaluated for extent of visceral tissue attachment and mesh contraction, C-QUR performs as well or better than the other currently marketed products (Tables 1 & 2).
Table 1. Adhesion Properties and Mesh Contraction
Tissue Attachment Tissue Attachment Amount (%) Tenacity (1-4) 120 Days 120 Days C-QUR ProLite Ultra Composix

Table 2. Adhesion Characteristics of Intraperitoneal Mesh


Mesh Contraction (%) 120 Days 3.3 2.1 9.1 8.3 7.2 7.1 39.0 6.0 14.7 5.0 29.7 12.5 6.4 8.4 C-QUR (n= 5) Uncoated Polypropylene (n=12) Composix (n=17) DualMesh (n=14) Parietex Composite (n=1) Proceed (n=8) Sepramesh (n=4) Biologic Mesh (n=8) Adhesion Adhesiolysis Adhesion Surface Area Time/Mesh Surface Tenacity (1-4) (1-10) Area (min/cm) 2.8 0.4 4.8 1.8 0.14 0.1 3.5 0.9 3.5 0.6 2.4 0.6 3 3.4 0.5 3.3 0.5 2.9 0.4 8.4 1.1 8.6 1.1 5.9 1.8 6 8.1 1.5 7.5 1.3 6.6 1.8 0.38 0.4 0.36 0.1 0.12 0.1 0.25 0.28 0.1 0.16 .01 0.33 0.1

3.0 7.3 10.7 19.8 24.8 37.0 1.4 4.4 0.8 2.0 28.8 16.1 0.0 0.0

1.2 0.4 1.7 1.1 1.9 1.2 1.3 0.9 1.2 0.4 2.8 1.0 1.0 0.0

DualMesh Parietex Proceed Sepramesh

Pierce, R.A. et al. 120-Day Comparative Analysis of Adhesion Grade and Quantity, Mesh Contraction, and Tissue Response to a Novel Omega-3 Fatty Acid Bioabsorbable Barrier Macroporous Mesh After Intraperitoneal Placement. Surg Innov (2009) Volume 16, Number 1, 46-54.

Jenkins, E. D. et al. "Prospective Evaluation of Adhesion Characteristics to Intraperitoneal Mesh and Adhesiolysis-related Complications During Laparoscopic Re-exploration After Prior Ventral Hernia Repair." Surg Endosc (2010) Volume 24, Number 12, 3002-3007.

With numerous design configurations and sizes available for virtually every hernia procedure, the C-QUR Family of soft tissue repair products empowers the surgeon to choose the right mesh reinforcement for their patients needs, including patient comfort, safety and long term recovery.

David Earle, MD, FACS

The C-QUR Mesh has emerged as a first-line choice because it is particularly well suited to address the issues encountered during hernia surgery.

Assistant Professor of Surgery Director, Minimally Invasive Surgery Baystate Medical Center Tufts University School of Medicine Springfield, Massachusetts General Surgery News Special Report The Benefits of Omega-3 Fatty Acid-Coated Mesh in Ventral Hernia Repair

C-QUR Film Coated Mesh


Designed for open and laparoscopic hernia repair when a tissue separating layer is needed
C-QUR Mesh combines Atriums ProLite polypropylene mesh with a tissue separating film layer of all-natural, pharmaceutical grade Omega 3 fatty acid. A perfect choice for intra-abdominal placement, C-QUR Mesh outperforms all competitive products in regards to handling, positioning and fixation stability, while providing a more natural healing experience for the patient. Atriums ProLite polypropylene mesh construction provides optimal burst and fixation retention strength necessary for todays challenging hernia patients Tight trocar roll up capability with minimal edge curl Exceptional see-thru clarity helps surgeon identify anatomical landmarks and assure proper mesh fixation Ability to trim and customize mesh shape at the surgeons discretion, without loss of strength

Laparoscopic view of C-QUR following surgical implantation

C-QUR V-Patch Film Coated Mesh


Designed for the repair of small hernias such as umbilical, epigastric and trocar site defects
C-QUR V-Patch combines the clinically proven performance of ProLite polypropylene mesh with an all-natural, pharmaceutical grade Omega 3 fatty acid (O3FA) bioabsorbable coating and advanced deployment technology.

Exclusive advanced deployment system allows for easy implantation of the device through a small defect Non-distorting fixation straps provide uniform lift and conformability towards abdominal wall, maximizing contact for uniform and complete tissue incorporation All natural O3FA coating provides less foreign body reaction for faster, more complete mesh incorporation Only umbilical patch with an all-natural absorbable coating

Laparoscopic view of C-QUR V-Patch following surgical implantation.

C-QUR TacShield Film Coated Mesh


Designed for the surgical repair of medium to large size open ventral hernia repairs
C-QUR TacShield combines the C-QUR Mesh platform with advanced fixation guidance technology for open abdominal wall repair. C-QUR TacShield, with its novel Symmetrical Fixation Apron (SFA), provides improved handling, and fixation guidance for enhanced surgical convenience and patient protection.

Unique Symmetrical Fixation Apron provides enhanced fixation guidance, stability, and protection Simplifies surgical placement and alignment of the mesh Saves time in the operating room when compared to traditional, single layer mesh products Available in a wide variety of sizes

Open ventral hernia repair using C-QUR TacShield

C-QUR FX Filament Coated Mesh


Designed for open and laparoscopic hernia repair when a tissue separating layer is not needed
C-QUR FX filament coated mesh is the open pore ProLite family of polypropylene mesh with an absorbable, 30-day, all-natural pharmaceutical grade Omega 3 fatty acid coating. The open pores and filament coating help promote faster, more complete incorporation throughout. The O3FA coating also provides uncompromised memory with signicantly improved handling vs. non-coated bare polymer mesh products. Incites a less severe inflammatory response when compared to bare polymer meshes allowing for less fibrous formation and less rigid tissue incorporation Preferred handling with uncompromised memory and see thru clarity Optimal burst and fixation retention strength
Uniform O3FA coated Polypropylene Monofilaments Open Pores

Individual mesh monofilaments coated with Omega 3 fatty acid (O3FA) improve handling and healing

Coated Mesh Ordering Information


C-QUR Mesh
Round
Part No. Cm Inches Box Qty.

Square / Round Oblong / Oval

Mid-Line Oval X-Large Oblong / Oval

31505 31506 31507 31543 31544 31526 31528 31527 31531 31533 31534 31538 31535 31536 31537 31540 31542
Part No.

9 13 15 8.9 x 8.9 12.5 x 12.5 7.5 x 15 10 x 15 11 x 14 13.5 x 17.8 15 x 20.3 15 x 23 16 x 31.2 17.8 x 23 20.3 x 25.4 20.3 x 30.5 25.4 x 35.5 30.5 x 45.7
Cm

3.54 5.12 5.90 3.5 x 3.5 5x5 3x6 4x6 4.3 x 5.5 5.4 x 7 6x8 6x9 6.3 x 12.3 7x9 8 x 10 8 x 12 10 x 14 12 x 18
Inches

1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each
Box Qty.

C-QUR TacShield
Round Oblong

Oval

31610 31626 31628 31644 31633 31636 31637 31638 3 16 11 31612


Part No.

11.4 7.5 x 15 10 x 15 12.5 x 12.5 15 x 20.3 20.3 x 25.4 20.3 x 30.5 16 x 31.2 22.1 x 27.1 27.4 x 34.9
Cm

4.5 3x6 4x6 5x5 6x8 8 x 10 8 x 12 6.3 x 12.3 8.7 x 10.7 10.8 x 13.7
Inches

1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each
Box Qty.

C-QUR V-Patch

31200 31201 31202

4.3 x 4.3 6.4 x 6.4 8.0 x 8.0


Cm

1.7 x 1.7 2.5 x 2.5 3.2 x 3.2


Inches

1 each 1 each 1 each


Box Qty.

C-QUR FX
Square / Round

Part No.

Oblong / Oval

Onlay / Pre-Shape No Hole and Slit Onlay / Pre-Shape With Hole and Slit Laparoscopic / Pre-Shape With Hole No Hole

31324 31332 31341 31322 31326 31328 31336 31340 31342 31311 31212 31385 31388

7.5 x 7.5 15 x 15 30.5 x 30.5 5 x 10 7.5 x 15 10 x 15 20.3 x 25.4 25.4 x 35.5 30.5 x 45.7 6.4 x 14 6.4 x 14 10.5 x 14.6 10.5 x 14.6

3x3 6x6 12 x 12 2x4 3x6 4x6 8 x 10 10 x 14 12 x 18 2.5 x 5.5 2.5 x 5.5 4.1 x 5.7 4.1 x 5.7

1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 6 each 6 each 1 each 1 each

Additional sizes pending. Please refer to our website www.atriummed.com for a complete listing of C-QUR products.
ATRIUM MEDICAL CORPORATION ATRIUM EUROPE B.V. ATRIUM AUSTRALIA-PACIFIC RIM PTY. LTD.

5 Wentworth Drive Hudson, New Hampshire 03051 U.S.A. 603-880-1433 603-880-6718

Rendementsweg 20 B 3641 SL Mijdrecht, The Netherlands +31 297 230 420 +31 297 282 653

Level 6, 579 Harris Street Ultimo NSW 2007 Australia +61 2 8272 3100 +61 2 8272 3199

Atrium Medical Corporation 2012. All rights reserved. Printed in U.S.A. 08/12 Part #0416D. Atrium, C-QUR, C-QUR TacShield, C-QUR V-Patch, C-QUR FX and ProLite are trademarks of Atrium Medical Corporation, a MAQUET GETINGE GROUP company.

You might also like