Scribd
Upload
412 views

PI Controller in The Simulink Model Using MATLAB

MatlabAssignmentExperts is a 4 year old firm operating in the niche field of MATLAB Assignments, Homeworks, Projects, Term Paper, Dissertation and Thesis. It is a leading Homework and assignment solution provider that specializes in MATLAB assignments. Our team of experts specializes in solving assignments using Math works’ MATLAB and Simulink software. Our objective is to ensure that all of your MATLAB homework is taken care of and we try and provide complete support for completion of MATLAB assignments. We have been providing help with assignments and been assisting students achieve high quality MATLAB assignments. We aim to ensure that the toughest of the MATLAB assignments are resolved with the support of our team of experts. Our trained and certified experts in MATLAB can assist you to complete all the steps of numerical problems requiring the usage of MATLAB and provide you with analysis as well as detailed solutions. Our online MATLAB homework and online MATLAB tutoring services aims at helping students perform better through involvement of experienced MATLAB experts. We can help you gain MATLAB assignment assistance from our experiences experts who can help you with MATLAB homework help. We help our clients obtain high quality assignments through our live MATLAB homework help services whenever they need assignment help. As MATLAB requires experience and understanding of the software, our team of experts go through intensive training and this can benefit you in a great way. Your academic success reflects our success and so our team of experts is completely dedicated to provide you with high quality and value adding MATLAB online homework services on a 24x7 basis. This can help you not only obtain better grades in MATLAB assignments but also help you learn more about solving MATLAB assignments by going through the step by step MATLAB solutions.

Uploaded by

MatlabAsignmentExperts
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
412 views

PI Controller in The Simulink Model Using MATLAB

MatlabAssignmentExperts is a 4 year old firm operating in the niche field of MATLAB Assignments, Homeworks, Projects, Term Paper, Dissertation and Thesis. It is a leading Homework and assignment solution provider that specializes in MATLAB assignments. Our team of experts specializes in solving assignments using Math works’ MATLAB and Simulink software. Our objective is to ensure that all of your MATLAB homework is taken care of and we try and provide complete support for completion of MATLAB assignments. We have been providing help with assignments and been assisting students achieve high quality MATLAB assignments. We aim to ensure that the toughest of the MATLAB assignments are resolved with the support of our team of experts. Our trained and certified experts in MATLAB can assist you to complete all the steps of numerical problems requiring the usage of MATLAB and provide you with analysis as well as detailed solutions. Our online MATLAB homework and online MATLAB tutoring services aims at helping students perform better through involvement of experienced MATLAB experts. We can help you gain MATLAB assignment assistance from our experiences experts who can help you with MATLAB homework help. We help our clients obtain high quality assignments through our live MATLAB homework help services whenever they need assignment help. As MATLAB requires experience and understanding of the software, our team of experts go through intensive training and this can benefit you in a great way. Your academic success reflects our success and so our team of experts is completely dedicated to provide you with high quality and value adding MATLAB online homework services on a 24x7 basis. This can help you not only obtain better grades in MATLAB assignments but also help you learn more about solving MATLAB assignments by going through the step by step MATLAB solutions.

Uploaded by

MatlabAsignmentExperts
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

PI CONTROLLER IN THE SIMULINK MODEL USING MATLAB (SAMPLE ASSIGNMENT)

For any Help with PI Controller in the Simulink Mode Assignment upload your Homework Assignment by clicking at Submit Your Assignment button or you can email it to [email protected] .To talk to our Online PI Controller in the Simulink Mode Project Tutors you can call at +1 5208371215 or use our Live Chat option.

Designing PID for Disturbance Rejection with PID Tuner


This sample assignment shows how to design a PI controller with good disturbance rejection performance using the PID Tuner tool. The example also shows how to design an ISA-PID controller for both good disturbance rejection and good reference tracking. Launching the PID Tuner with Initial PID Design The plant model is

G = zpk(-5,[-1 -2 -3 -4],6,'OutputDelay',1); G.InputName = 'u'; G.OutputName = 'y';


Use the following command to launch the PID Tuner to design a PI controller in parallel form for plant G.

pidtool(G,'pi') The PID Tuner automatically designs an initial PI controller. Click "Show parameters" button to display the controller gains and performance metrics.

For step reference tracking, the settling time is about 12 seconds and the overshoot is about 6.3 percent, which is acceptable for this example. Tuning PID for Disturbance Rejection Assume that a step disturbance occurs at the plant input and the main purpose of the PI controller is to reject this disturbance quickly. In the rest of this section, we will show how to design the PI controller for better disturbance rejection in the PID Tuner. We also expect that the reference tracking performance is degraded as disturbance rejection performance improves.

Because the attenuation of low frequency disturbance is inversely proportional to integral gain Ki, maximizing the integral gain is a useful heuristic to obtain a PI controller with good disturbance rejection. For background, see Karl Astrom et al., "Advanced PID Control", Chapter 4 "Controller Design", 2006, The ISA Society. Switch Response to Input disturbance rejection, The peak deviation is about 1 and it settles to less than 0.1 in about 9 seconds.

Move the slider to the right to increase the response speed (open loop bandwidth). The Ki gain in the Controller parameters table first increases and then decreases, with the maximum value occurring at 0.3. When Ki is 0.3, the

peak deviation is reduced to 0.9 (about 10% improvement) and it settles to less than 0.1 in about 6.7 seconds (about 25% improvement).

Switch the response back to Reference tracking. Because we increase the bandwidth, the step reference tracking response becomes more oscillated. Additionally the overshoot exceeds 15 percent, which is usually unacceptable. This type of performance trade off between reference tracking and disturbance rejection often exists because a single PID controller is not able to satisfy both design goals at the same time.

Export the designed PI controller to MATLAB Workspace by clicking the second toolbar button. The controller is represented by a PID object and you need it to create an ISA-PID controller in the next section.

You can also manually create the same PI controller in MATLAB Workspace by using the pid command. In this command you can directly specify the Kp and Ki gains obtained from the parameter table of the PID Tuner.

C = pid(0.64362,0.30314); C.InputName = 'e'; C.OutputName = 'u'; C C=

1 Kp + Ki * --s

with Kp = 0.644, Ki = 0.303

Continuous-time PI controller in parallel form.

Extending PID controller to ISA-PID Controller A simple solution to make a PI controller perform well for both reference tracking and disturbance rejection is to upgrade it to an ISA-PID controller. It improves reference tracking response by providing an additional tuning parameters b that allows independent control of the impact of the reference signal on the proportional action.

In the above ISA-PID structure, there is a feedback controller C and a feed-forward filter F. In this example, C is a regular PI controller in parallel form that can be represented by a PID object:

F is a pre-filter that involves Kp and Ki gains from C plus the set-point weight b:

Therefore the ISA-PID controller has two inputs (r and y) and one output (u). Set-point weight b is a real number between 0 and 1. When it decreases, the overshoot in the reference tracking response is reduced. In this example, b is chosen to be 0.7.

b = 0.7;
% the following code constructs an ISA-PID from the feedback controller PID

F = tf([b*C.Kp C.Ki],[C.Kp C.Ki]); F.InputName = 'r'; F.OutputName = 'uf'; Sum = sumblk('e','uf','y','+-'); ISAPID = connect(C,F,Sum,{'r','y'},'u') ISAPID =

From input "r" to output "u": 0.4505 s^2 + 0.5153 s + 0.1428 -----------------------------s^2 + 0.471 s

From input "y" to output "u": -0.6436 s - 0.3031 -----------------s

Continuous-time transfer function.

Compare Performance The reference tracking response with ISA-PID controller has much less overshoot because set-point weight b reduces overshoot. % Closed-loop system with PI controller for reference tracking

sys1 = feedback(ss(G)*C,1);
% Closed-loop system with ISA-PID controller

sys2 = connect(ISAPID,ss(G),{'r','u'},'y');
% Compare responses

step(sys1,'r-',sys2(1),'b.'); legend('show','location','southeast')

title('Reference Tracking')

The disturbance rejection responses are the same because set-point weight b only affects reference tracking. % Closed-loop system with PI controller for disturbance rejection

sys1 = feedback(ss(G),C);
% Compare responses

step(sys1,'r-',sys2(2),'b.'); legend('PID','ISA-PID'); title('Disturbance Rejection')

You might also like