Scribd Logo
Upload

Welcome to Scribd!

  • 465 views

    Center Drills - Broca de Centro

    Uploaded by

    biluzin
    Center drills can be divided into two groups: those with straight cutting edges and those with curved profiles. Drills with curved profiles have the advantage of being less prone to breakage since they do not have sharp corners. Various international standards specify dimensions for center drills, including drill diameter, body length, and radius size. Center drills are typically made of high-speed steel or carbide and are subject to normalization standards.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Center Drills - Broca de Centro

    Uploaded by

    biluzin
    465 views4 pages
    Center drills can be divided into two groups: those with straight cutting edges and those with curved profiles. Drills with curved profiles have the advantage of being less prone to breakage since they do not have sharp corners. Various international standards specify dimensions for center drills, including drill diameter, body length, and radius size. Center drills are typically made of high-speed steel or carbide and are subject to normalization standards.

    Original Description:

    Geometria de Broca de Centro

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Center drills can be divided into two groups: those with straight cutting edges and those with curved profiles. Drills with curved profiles have the advantage of being less prone to breakage since they do not have sharp corners. Various international standards specify dimensions for center drills, including drill diameter, body length, and radius size. Center drills are typically made of high-speed steel or carbide and are subject to normalization standards.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    465 views4 pages

    Center Drills - Broca de Centro

    Uploaded by

    biluzin
    Center drills can be divided into two groups: those with straight cutting edges and those with curved profiles. Drills with curved profiles have the advantage of being less prone to breakage since they do not have sharp corners. Various international standards specify dimensions for center drills, including drill diameter, body length, and radius size. Center drills are typically made of high-speed steel or carbide and are subject to normalization standards.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Center drills

    A special case of drill bits are the drill bits for centers. They can be divided into two groups: 1) Normal Center Drills with straight cutting edges 2) Drills for centers with curved profile The first type can execute the center with the protection chamfer or without protection chamfer. With reference to figure N1 we can observe that the tract E that mates with the tailstock, is protected by the chamfer of protection that prevents any deformation on the edge which can cause an inaccurate centering of tailstock.

    Fig. N1- Center Drills with straight cutting edges Drills for centers can be constructed in high speed steel but also in carbide. They are subject to various normalizations such as the UNI 3223 or DIN 333, it includes: DIN 333-A - Drills for center with an angle of 60 DIN 333-R - Drills for center with a radius centered on 60 DIN 333-B - Drills for center with angles of 60 and 120 (with protection chamfer) The characteristics of the centers according to UNI 3223 are shown in table N1, and the size of some of the drills according to standard DIN are shown in tables N2 - 3 - 4. For more details please refer to the original tables UNI and DIN.

    Table N1 - Standard size of the centers with and without chamfer protection (UNI 3223)

    d (mm) 0,5 0,75 1,0 1,5 2,0 3,0 4,0 5,0 6,0 8,0 12,0

    Type A d1 1,25 1,9 2,5 3,8 5,0 7,5 10 12,5 15 20 30 Lmin 1,2 1,8 2,3 3,5 4,6 6,9 9,2 11,5 13,8 18,4 27,6 D (Body diameter) mm 3,15 4 5 6,3 8 10 12,5 16 D (Body diameter) mm 4 6,3 8 10 11,2 14 18 20 D (Body diameter) mm 3,15 4 5 6,3 8 10 12,5 16 d1 -2,5 3,8 5,0 7,5 10 12,5 15 20 30 d2 --3,9 5,9 7,8 11 14,2 17,7 21,2 27 38

    Type B Lmin --2,7 4,1 5,4 7,9 10,4 13 15,6 20,4 30 S --0,4 0,6 08 1,0 1,2 1,5 1,8 2,0 2,4

    Table N2- Sizing of some center drills Standard DIN 333-A (ref. Fig No.3)

    d (mm) 1 1,6 2 2,5 3,15 4 5 6,3

    L1 (mm) 31,5 35,5 40 45 50 56 63 71

    L2 (mm) 1,3 2 2,5 3,1 3,9 5 6,3 8

    Table N3- Sizing of some center drills Standard DIN 333-B (ref. Fig No.3)

    d (mm) 1 1,6 2 2,5 3,15 4 5 6,3

    L1 (mm) 35,5 45 50 56 60 67 75 80

    L2 (mm) 1,6 2,4 2,9 3,6 4,4 5,6 6,9 8,6

    Table N4- Sizing of some center drills Standard DIN 333-R (ref. Fig No.3)

    d (mm) 1 1,6 2 2,5 3,15 4 5 6,3

    L1 (mm) 31,5 35,5 40 45 50 56 63 71

    L3 (mm) 3 4,25 5,3 6,7 8,5 10,6 13,2 17

    Radius (mm) 3,15 5 6,3 8 10 12,5 16 20

    The center drills of R-type the contact with the tailstock is at only one point with a certain self-centering action of the piece. The position of the center of the radius R can be determined as follows, with reference to figure N2:

    ; ; ;

    ; ;

    Fig. N2- Position of the center of the radius R of the drills with curved cutting edge
    Type A

    d = 0,5 0,8 Type R

    d = 1 10

    d = 0,5 0,8

    d = 1 10

    Fig. N3- Center drills type A and type R construction details

    The center drills with curved edges do not present corners on the profile therefore they are less susceptible to breakage compared to the drills with straight cutting edges. In some cases, however, where the piece should be subject to further heavy processing , the center performed with this drill cannot guarantee perfect stability on the tailstock.

    Core thickness Relief

    Fig. N4- Center drills type R Detail of the relief on the initial part It should be noted that the center of the radius is moved to the inside of the quantity E in order to generate on the peripheral cutting edge a certain relief f on the outer diameter. The clearance angle , for a certain radius R and a certain shift E is given by:

    You might also like