Programming Guide

Copyright 2010 Foxit Corporation. All Rights Reserved. No part of this document can be reproduced, transferred, distributed or stored in any format without the prior written permission of Foxit. Anti-Grain Geometry - Version 2.3, Copyright (C) 2002-2005 Maxim Shemanarev (http://www.antigrain.com). FreeType2 (freetype2.2.1), Copyright (C) 1996-2001, 2002, 2003, 2004| David Turner, Robert Wilhelm, and Werner Lemberg. LibJPEG (jpeg V6b 27-Mar-1998), Copyright (C) 1991-1998 Independent JPEG Group. ZLib (zlib 1.2.2), Copyright (C) 1995-2003 Jean-loup Gailly and Mark Adler. Little CMS, Copyright (C) 1998-2004 Marti Maria. Kakadu, Copyright (C) 2001, David Taubman, The University of New South Wales (UNSW). PNG, Copyright (C) 1998-2009 Glenn Randers-Pehrson. LibTIFF, Copyright (C) 1988-1997 Sam Leffler and Copyright (C) 1991-1997 Silicon Graphics, Inc. Permission to copy, use, modify, sell and distribute this software is granted provided this copyright notice appears in all copies. This software is provided "as is" without express or im-plied warranty, and with no claim as to its suitability for any purpose.

Programming Guide

Contents
Contents .......................................................................................................................................................... 3 Overview.......................................................................................................................................................... 7 Features ........................................................................................................................................................... 8 Tutorials ......................................................................................................................................................... 10 TUTORIAL 1: Initialize and Destroy the FPDFSDK library ................................................................ 10 TUTORIAL 2: Load PDF Document and Page .................................................................................... 10 TUTORIAL 3: Basic Rendering on Windows ...................................................................................... 11 TUTORIAL 4: Basic Rendering on Linux ............................................................................................ 12 TUTORIAL 5: Zoom the Page ............................................................................................................... 12 TUTORIAL 6: Scroll the Page ............................................................................................................... 14 TUTORIAL 7: Rotate the Page.............................................................................................................. 14 TUTORIAL 8: Render Part of the Page ................................................................................................ 15 TUTORIAL 9: Print Pages ..................................................................................................................... 15 TUTORIAL 10: Convert Page into Bitmap .......................................................................................... 16 TUTORIAL 11: Search on a page ......................................................................................................... 17 TUTORIAL 12: Create a new pdf document ....................................................................................... 17 Function Reference ...................................................................................................................................... 19 1. FPDFVIEW Operation (Base Module) .......................................................................................... 19 FPDF_InitLibrary .............................................................................................................................. 19 FPDF_GetModuleMgr...................................................................................................................... 19 FPDF_DestroyLibary ....................................................................................................................... 19 FPDF_UnlockDLL ............................................................................................................................ 20 FPDF_LoadDocument ..................................................................................................................... 20 FPDF_LoadMemDocument ............................................................................................................. 20 FPDF_LoadCustomDocument ........................................................................................................ 21 FPDF_GetLastError ......................................................................................................................... 22 FPDF_GetDocPermission ............................................................................................................... 22 FPDF_GetPageCount ...................................................................................................................... 22 FPDF_LoadPage ............................................................................................................................. 23 FPDF_GetPageWidth ...................................................................................................................... 23 FPDF_GetPageHeight ..................................................................................................................... 23 FPDF_ GetPageSizeByIndex .......................................................................................................... 23 FPDF_EnumPageSize..................................................................................................................... 24 FPDF_RenderPage ......................................................................................................................... 24 FPDF_RenderPageBitmap .............................................................................................................. 25 FPDF_QuickDrawPage ................................................................................................................... 25 FPDF_ClosePage ............................................................................................................................ 26 FPDF_CloseDocument .................................................................................................................... 26

Programming Guide

2.

3.

FPDF_DeviceToPage ...................................................................................................................... 26 FPDF_PageToDevice ...................................................................................................................... 27 FPDFBitmap_Create ....................................................................................................................... 28 FPDFBitmap_CreateEx ................................................................................................................... 28 FPDFBitmap_FillRect ...................................................................................................................... 29 FPDFBitmap_GetBuffer ................................................................................................................... 30 FPDFBitmap_GetWidth ................................................................................................................... 30 FPDFBitmap_GetHeight .................................................................................................................. 30 FPDFBitmap_GetStride ................................................................................................................... 30 FPDFBitmap_Destroy ...................................................................................................................... 31 FPDF_AllocMemory ......................................................................................................................... 31 FPDF_FreeMemory ......................................................................................................................... 31 FPDF_SetErrorHandler ................................................................................................................... 32 FPDF_SetModulePath ..................................................................................................................... 32 FPDF_SetGlyphProvider ................................................................................................................. 32 FPDF_SetSystemFontFile ............................................................................................................... 32 FPDF_SetWCEFontMapper ............................................................................................................ 33 FPDFDOC Operation (Base Module)............................................................................................ 33 FPDFBookmark_GetFirstChild ........................................................................................................ 33 FPDFBookmark_GetNextSibling ..................................................................................................... 33 FPDFBookmark_Find ...................................................................................................................... 34 FPDFBookmark_GetColorRef ......................................................................................................... 34 FPDFBookmark_GetFontStyle ........................................................................................................ 34 FPDFBookmark_GetTitle ................................................................................................................. 35 FPDFBookmark_GetAction ............................................................................................................. 35 FPDFBookmark_GetDest ................................................................................................................ 35 FPDFBookmark_GetPageFirstLine ................................................................................................. 36 FPDFAction_GetType ...................................................................................................................... 36 FPDFAction_GetFilePath................................................................................................................. 37 FPDFAction_GetDest ...................................................................................................................... 37 FPDFAction_GetURIPath ................................................................................................................ 37 FPDFDest_GetPageIndex ............................................................................................................... 38 FPDFDest_GetZoomMode .............................................................................................................. 38 FPDFDest_GetZoomParam ............................................................................................................ 38 FPDFLink_GetLinkAtPoint ............................................................................................................... 39 FPDFLink_GetDest .......................................................................................................................... 39 FPDFLink_GetAction ....................................................................................................................... 40 FPDF_ GetPageThumbnail ............................................................................................................. 40 FPDF_GetMetaText ......................................................................................................................... 40 FPDFTEXT Operation (Text Module) ............................................................................................ 41 FPDFText_LoadPage ...................................................................................................................... 41

Programming Guide

4.

FPDFText_ClosePage ..................................................................................................................... 41 FPDFText_CountChars .................................................................................................................... 41 FPDFText_GetUnicode .................................................................................................................... 42 FPDFText_IsGenerated ................................................................................................................... 42 FPDFText_GetFontSize ................................................................................................................... 43 FPDFText_GetOrigin ....................................................................................................................... 43 FPDFText_GetCharBox ................................................................................................................... 43 FPDFText_GetMatrix ....................................................................................................................... 44 FPDFText_GetFont .......................................................................................................................... 44 FPDFFont_GetAscent ..................................................................................................................... 45 FPDFFont_GetDescent ................................................................................................................... 45 FPDFFont_GetName ....................................................................................................................... 45 FPDFText_GetCharIndexAtPos ....................................................................................................... 45 FPDFText_GetCharIndexByDirection .............................................................................................. 46 FPDFText_GetText........................................................................................................................... 47 FPDFText_CountRects .................................................................................................................... 47 FPDFText_GetRect .......................................................................................................................... 47 FPDFText_GetBoundedText ............................................................................................................ 48 FPDFText_CountBoundedSegments .............................................................................................. 48 FPDFText_GetBoundedSegment .................................................................................................... 49 FPDFText_FindStart ........................................................................................................................ 49 FPDFText_FindNext ........................................................................................................................ 49 FPDFText_FindPrev ........................................................................................................................ 50 FPDFText_GetSchResultIndex ........................................................................................................ 50 FPDFText_GetSchCount ................................................................................................................. 50 FPDFText_FindClose ....................................................................................................................... 50 FPDFLink_LoadWebLinks ............................................................................................................... 51 FPDFLink_CountWebLinks ............................................................................................................. 51 FPDFLink_GetURL .......................................................................................................................... 51 FPDFLink_CountRects .................................................................................................................... 52 FPDFLink_GetRect .......................................................................................................................... 52 FPDFLink_CloseWebLinks .............................................................................................................. 52 FPDFText_PDFToText ..................................................................................................................... 53 FPDFText_PageToText .................................................................................................................... 53 FPDFEDIT Operation (Edit Module) ............................................................................................. 53 a) Document Operation .............................................................................................................. 53 b) Page Operation ....................................................................................................................... 54 c) Page Objects Operation ......................................................................................................... 58 d) Text Operation......................................................................................................................... 67 e) Fonts Operation ...................................................................................................................... 74 f) Path Operation ........................................................................................................................ 79

Programming Guide

g) Forms Operation..................................................................................................................... 84 h) Images Operation ................................................................................................................... 87 Redistribution ............................................................................................................................................... 90

Programming Guide

Overview
Foxit PDF SDK, with minimized resource demand and redistribution size, is developed by Foxit Corporation for high-quality rendering of PDF document pages in a wide range of applications. Foxit PDF SDK is specialized in PDF document rendering, with the capabilities of PDF parsing, editing, and creating. Foxit PDF SDK supports almost all PDF page description features, except those very rarely used feature. The Features section lists all major features supported by the SDK. Foxit PDF SDK is carefully designed and implemented so that for most documents and pages, it achieves a rendering speed comparable or faster than Adobe Acrobat Reader, while maintaining most of the same rendering quality. Foxit PDF SDK runs on Windows 95/NT or later, and most of the functions also run on Linux (any recent releases). For detailed information on runtime configuration please refer to the redistribution section. Evaluation Copy: The downloaded version of Foxit PDF SDK from our website is for evaluation use only. It displays some small messages when rendering any PDF documents. Please note that the text module and the edit module will be unavailable when the evaluation period expires. If you are just evaluating the basic module (viewing), you don't need to call on the FPDF_UnlockDLL function. If you want to evaluate the text module and the edit module, you will have to call up this function. Please find the SN and UnlockCode in the Readme file. If you purchased a license of Foxit Reader SDK, Foxit will send a licensed copy of the SDK to you, and you need to call up the FPDF_UnlockDLL function to activate the interfaces that you purchased.

Programming Guide

Features
Foxit PDF SDK (DLL) 2.0 does not only include the PDF viewing function (base module) in the last version, but also introduces two major functions PDF text extracting (text module) and PDF creating/editing (edit module). The base module, coming with the head file nam es of fpdfview.h and fpdfdoc.h, are used to render PDF documents, as well as obtain the navigation information from the PDF. If you want to use the text extraction function and the PDF editing function, please contact [email protected] to purchase. Here is a list of major PDF features supported by the basic module in the last version:

PDF Specification: 1.3, 1.4, 1.5,1.6 and 1.7 Automatic cross reference rebuild for documents damaged or generated by non-standard creator Compress Decoders: LZWDecode, FlateDecode, CCITTFaxDecode, DCTDecode Standard 40 bit and 128 bit encryption support All graphic objects: Path, Text, Image, Form, and Shading All color spaces: RGB, Gray, CMYK, ICCBased, Lab, Indexed, Separation, etc Tiling patterns and shadings Images: monochrome/colored image, JPEG images, masked and transparent images All font types: Type1, TrueType, Type0, Type3 All CJK (Chinese/Japanese/Korean) character set support (additional redistribution file required) All text rendering modes: fill, stroke, or clipping Anti-aliasing of text rendering Transparent groups (including text, path, and image) Display annotations Unlimited page zoom factor Page rotation at 90, 180 and 270 degrees

Here is a list of major PDF features supported by FOXIT PDF SDK 2.0: Base Module: The base module, coming with the head file nam es of pdfsdk.h and fpdfdoc.h, are used to render PDF documents and obtain the basic information of PDFs. a) Load PDFs from: Standard File System Memory Custom source: non-standard file system, e.g. mobile phone and Internet b) Get PDF info, such as Document permission and Page count. c) Render PDF pages to: Device (printer)

Programming Guide

Device Independent Bitmap d) Get the info of bookmarks and links a PDF. Text Module: This module, coming with a head file name of fpdftext.h, has the functions listed below: a) Search text in one page or one document at a time b) Extract text from a designated rectangle area or from an indices-range. c) Convert a PDF document or a single page to a text file. d) Obtain the information for each character in a PDF, including the Unicode code, font, font size, and the location information Edit Module: This module, coming with a head file name of fpdfedit.h, has the functions listed below: a) Create a PDF document. b) Create new pages or deletes existing pages from a PDF. c) Extract all kinds of objects included in a PDF, such as text object, path object, image object and form object. d) Modifies the content of a PDF document. Users can add, delete or edit any objects that are included in the PDF. For the detailed information of the interfaces, please refer to Function Reference.

Programming Guide

Tutorials
In this section we provide easy to follow tutorials on how to use FOXIT PDF SDK to render PDF pages as you like. Please note we use C language in all tutorials, so if you are using other programming languages, please refer to the corresponding information on how you can call the DLL. For C/C++ language, you can include the FPDFVIEW.H head file in your source code, and call the functions listed in the head file. You also need to link with the FPDFSDK.LIB file (on Windows) or libfpdfsdk.so (on Linux). FOXIT PDF SDK is a standalone dynamic library (DLL on Windows or shared library on Linux), it doesnt require any runtime language support (except basic Windows or Linux components), and therefore, you can call the SDK from any programming language which supports Windows system function calls or Linux shared library calls. FOXIT PDF SDK uses only basic data types including integer, double, zero-terminated string, and opaque pointers. You can find any of these types in any programming language. NOTE: for opaque pointer types defined in fpdfview.H head file, including PDF_DOCUMENT and PDF_PAGE, can be treated simply as 32 bit integers. Most programming languages support two types of DLL calling: 1. Static loading: you can declare the functions in your own language, at the compile time, so when the program starts, it will automatically look for FOXIT PDF SDK and load all functions; 2. Dynamic loading: you can call Windows system functions to load the DLL at any time after your program starts, and then you can load the necessary functions from the DLL, and call them.

TUTORIAL 1: Initialize and Destroy the FPDFSDK library

You have to call the FPDF_InitLibrary function before you can call any PDF processing functions and to call FPDF_DestroyLibrary to release all memory blocks allocated by the library. #include fpdfview.h FPDF_InitLibrary(this->m_hInstance); // Initialize the library. // Call some function from the DLL. FPDF_DestroyLibrary(); // After this function called, you should // not call any PDF processing functions.

TUTORIAL 2: Load PDF Document and Page

10

Programming Guide

In this tutorial, we will load a PDF document named testdoc.pdf, and then load the first page of the document. In order to render any page, the page must be loaded first. #include fpdfview.h FPDF_DOCUMENT pdf_doc; FPDF_PAGE pdf_page; // Before we can do anything, we need to unlock the DLL // NOTE: If you are evaluating FOXIT PDF SDK, you dont need unlock the DLL, // then evaluation marks will be shown with all rendered pages. FPDF_UnlockDLL(license_id, unlock_code); // first, load the document (no password specified) pdf_doc = FPDF_LoadDocument(testdoc.pdf, NULL); if (pdf_doc == NULL) // error handling // now load the first page (page index is 0) pdf_page = FPDF_LoadPage(pdf_doc, 0); if (pdf_page == NULL) // error handling

TUTORIAL 3: Basic Rendering on Windows

In this tutorial, we will render a loaded page onto a screen window, within a specified screen rectangle area. Note we dont show you the whole program here, only the handling of WM_PAINT message is shown. You need to put the code into the right place according to the development tool you choose to use. Let us assume we have a handle to the window, which is stored in hWnd variable. HWND hWnd; FPDF_DOCUMENT pdf_doc; // you must load document before page can be loaded FPDF_PAGE pdf_page; // you must load page before it can be rendered // Get handle to Device Context (DC) for the window HDC hDC = GetDC(hWnd); // Call FPDF_RenderPage function to render the whole page FPDF_RenderPage(hDC, pdf_page, 10, 10, 400, 500, 0, 0); The codes above will render the whole page onto the window, with the left-top corner of the page at point {10, 10} (coordinate relative to the left-top corner of the window), and the page will be fit into a rectangle with the

11

Programming Guide

width of 400 pixels and height of 500 pixels. The page will not be rotated.

TUTORIAL 4: Basic Rendering on Linux

Foxit PDF SDK doesnt directly support X-Windows output, however, you can use the Foxit Device Independent Bitmap (FXDIB) features provided in the SDK to render any PDF page into a bitmap device. You can then transfer the bitmap onto X-Windows surface, or image file, or other type of devices. Before you can use a bitmap device, you need to create one and you can use the FPDFBitmap_Create function to do that. Foxit PDF SDK supports two types of bitmaps: RGB bitmap and ARGB bitmap, you can choose which format you want to use when you create the bitmap. When the bitmap is created, you need to fill the buffer with the background that you like. Normally it can be a white background or a non-colored background (if alpha channel is used). Now you can use it in the FPDF_RenderPageBitmap function. This function is pretty much the same as the FPDF_RenderPage function, but instead of sending output to a Windows device, it outputs to the bitmap device. Here is a sample for basic rendering on Linux: FPDF_BITMAP bitmap; FPDF_DOCUMENT pdf_doc; // you must load document before page can be loaded FPDF_PAGE pdf_page; // you must load page before it can be rendered // Create bitmap first. We dont use alpha channel here. bitmap = FPDFBitmap_Create(400, 500, FALSE); // Fill the bitmap with white background FPDFBitmap_FillRect(bitmap, 0, 0, 400, 500, 255, 255, 255, 255); // Call FPDF_RenderPageBitmap function to render the whole page FPDF_RenderPageBitmap(bitmap, pdf_page, 10, 10, 400, 500, 0, 0); The following tutorials introduce more features of rendering in Foxit PDF SDK. All the samples use the FPDF_RenderPage function however the same techniques apply to FPDF_RenderPageBitmap, in the same way.

TUTORIAL 5: Zoom the Page

12

Programming Guide

In tutorial 2 we rendered the page into a fixed size rectangle. This is simple; however, its not that useful. In most cases, you want to show the PDF page in its original size, or zoom in/zoom out for larger/smaller display. All these operations can be achieved by adjustment of the size parameters (the fifth and sixth parameters) of FPDF_RenderPage function. If you want to show the page in its original size, you first need to know the original size of the page, this is easy, and you can call one of the following functions to get width and height of a page: double page_width, page_height; page_width = FPDF_GetPageWidth(pdf_page); page_height = FPDF_GetPageHeight(pdf_page); Please note the page width and height returned from the above two functions and are measured in typographic POINTS. In typography, one point equals to 1/72 inch, which is about 0.35 milli-miter. You can not directly pass the width or height in points into FPDF_RenderPage function, because FPDF_RenderPage accepts only pixels for screen size. Fortunately you can convert the points to pixels if you know the size of one pixel on your computer screen: int logpixelsx, logpixelsy, size_x, size_y; HDC hDC; // get number of pixels per inch (horizontally and vertically) logpixelsx = GetDeviceCaps(hDC, LOGPIXELSX); logpixelsy = GetDeviceCaps(hDC, LOGPIXELSY); // convert points into pixels Size_x = page_width / 72 * logpixelsx; size_y = page_height / 72 * logpixelsy; After you get the original page size in pixels, you can use it in the FPDF_RenderPage to display the page in its original size: FPDF_RenderPage(hDC, pdf_page, 10, 10, size_x, size_y, 0, 0); Now, you may want to zoom in or out of the page on the screen. Note you can zoom both vertically and in a horizontal direction, with separate zoom factors. Again, all you need to do is to adjust the size_x and size_y parameter when you call the FPDF_RenderPage function. The following call shows the page with 200% zoom factor:

13

Programming Guide

FPDF_RenderPage(hDC, pdf_page, 10, 10, size_x * 2, size_y * 2, 0, 0); While the following call shrink the page by 50%: FPDF_RenderPage(hDC, pdf_page, 10, 10, size_x / 2, size_y / 2, 0, 0);

TUTORIAL 6: Scroll the Page

Sometimes your PDF viewing codes need to provide scroll capability, especially when the page is zooming into a large size exceeding the displayable area in the screen window. To scroll the page to a different position, horizontally or vertically, you can adjust the start_x and start_y parameters when you call FPDF_RenderPage function. Because start_x and start_y parameters always specify the position of the top-left corner for displaying the page, so when you scroll down, the top-left corner of the page will go up, therefore the start_y parameter should be decreased. Sometimes the parameter can become negative, this is OK, this is a way to tell the FPDF_RenderPage function that the top-left corner of the page is not visible any more. Likewise, when you scroll up, the start_y will increase. When you scroll left/right, the start_x parameters will increase/decrease accordingly. Here is an example how you can scroll the page vertically to half of its height: int start_y; // Calculate the new start_y, decreased by the scroll pixel size start_y = 10 page_height / 2; FPDF_RenderPage(hDC, pdf_page, 10, start_y, size_x, size_y, 0, 0);

TUTORIAL 7: Rotate the Page

PDF pages can be displayed upright like it is, or, it can be rotated in both direction (clockwise or counter-clockwise), or it can be displayed upside-down. To achieve these different rotations, you just need to adjust the rotate parameter when you call FPDF_RenderPage function. The rotate parameter can be 0, 1, 2, or 3. Use 0 for no rotated,1 for rotated (90 degrees) clockwise, 2 for

14

Programming Guide

upside-down, 3 for rotated (90 degrees) counter-clockwise. The following example shows how you can rotate the page clockwise: FPDF_RenderPage(hDC, pdf_page, 10, 10, size_x, size_y, 1, 0);

TUTORIAL 8: Render Part of the Page

Very often you dont want to re-render the whole page because it might be time consuming, you just want to re-render the area that needs to be re-painted. FPDF_RenderPage supports partial rendering through the standard Windows clip box mechanism,that is, if you have clip box correctly set, FPDF_RenderPage automatically render only page objects (texts, graphics, or images) inside the clip box. You can set the clip box implicitly using WIN32 function InvalidateRect, or, call one of the clipping WIN32 functions (like SelectClipPath) to set the clip box explicitly. Here is an example showing how you can call InvalidateRect to set a clip box, so only the partial page will be re-rendered. We assume you have handled WM_PAINT message correctly by calling FPDF_RenderPage function. RECT rect; int left, right, top, bottom; rect.left = left; rect.right = right; rect.top = top; rect.bottom = bottom; InvalidateRect(hWnd, &rect, TRUE); Note: for correctly re-render the page content; you MUST clear the drawing area first, as we indicated in the last parameter of InvalidateRect function call. And you need to handle WM_ERASEBKGND function to fill the background with pure white.

TUTORIAL 9: Print Pages

To output a PDF pages to the printer it is almost the same as displaying the pages on the screen. Windows system treats both screen and printer as display devices. So you can get a DC (Device Context) for a printer, and then you can use the same FPDF_RenderPage function to output to the printer.

15

Programming Guide

The only difference would be for printing you need to deal with documents and pages. We dont discuss how to get a printer DC here, please refer to WIN32 documents or documents about your development tool. Here is an example on how you can print a loaded page: HDC hDC; DOCINFO doc_info; // Get a printer DC hDC = CreateDC(WINSPOOL, Printer Name, NULL, NULL); // Start a printer job StartDoc(hDC, &doc_info); // Start a new printing page StartPage(hDC); // we need to calculate the page size here // Now we can render the page to the printer FPDF_RenderPage(hDC, pdf_page, 0, 0, size_x, size_y, 0, 0);

TUTORIAL 10: Convert Page into Bitmap

Another application of FPDF_RenderPage function is converting a page into a bitmap. Windows allows you can create a memory DC which holds a bitmap inside, when you draw onto that DC nothing has been outputted, except the bitmap has been changed. Therefore, after FPDF_RenderPage finished its rendering into a bitmap DC, you can take the bitmap anywhere, and save it into an image file, with any format you may like. Here is an example: HDC hDC, hMemDC; HBITMAP hBitmap; // Create a memory DC, which is compatible with the screen DC hMemDC = CreateCompatibleDC(hDC); // Create a bitmap for output hBitmap = CreateCompatibleBitmap(hDC, size_x, size_y); // Select the bitmap into the memory DC hBitmap = (HBITMAP)SelectObject(hMemDC, hBitmap); // Now render the page onto the memory DC, which in turn changes the bitmap FPDF_RenderPage(hMemDC, pdf_page, 0, 0, size_x, size_y, 0, 0);

16

Programming Guide

// Release the bitmap from the memory DC hBitmap = (HBITMAP)SelectObject(hMemDC, hBitmap); // Now the bitmap is filled with page contents. // You can save it using WIN32 or other tools

TUTORIAL 11: Search on a page

FPDFTEXT module is quite an important function for PDF searching. To use this module, please call the functions of FPDFText_FindStart, FPDFText_FindNext and FPDFText_FindPrev. Here is an example: // Get the text page from a pdf page. FPDF_TEXTPAGE pTextPage = FPDFText_LoadPage(pdf_Page); // Set the find flag int nFlag = FPDF_MATCHCASE | FPDF_MATCHWHOLEWORD // Get the search context handle FPDF_SCHHANDLE pSCHHandle = FPDFText_FindStart(pTextPage, findtext, nFlag, 0); // Search the text string. BOOL bResult = FPDFText_FindNext(m_pSCHHandle); // Release the search context FPDFText_FindClose(pSCHHandle); // Release all resources allocated for a text page information structure FPDFText_ClosePage(pTextPage);

TUTORIAL 12: Create a new pdf document

FPDFEDIT module is used to add, delete and edit a PDF document. To create a PDF document, please call the functions of FPDF_CreateNewDocument FPDFPage_New. FPDF_CreateNewDocument is used to create a blank PDF document, whose page count is 0. To edit the page, please call FPDFPage_New function to add pages first. Here is an example: // Create an empty pdf document FPDF_DOCUMENT pPDFDoc = FPDF_CreateNewDocument(); // Insert a pdf page FPDF_PAGE pdf_page = FPDFPage_New(pPDFDoc,0,500,600); // New an image object FPDF_PAGEOBJECT page_obj = FPDFPageObj_NewImgeObj(pPDFDoc);

17

Programming Guide

// Load the image from file BOOL ret = FPDFImageObj_LoadFromFile(pdf_page,1,page_obj,file_path); // Insert a pdf page FPDFPage_InsertObject(pdf_page,page_obj); // Save the new document FPDF_SaveAsFile(pPDFDoc,filepath,NULL,NULL,0,NULL,0);

18

Programming Guide

Function Reference
Details of functions in Foxit PDF SDK are removed from this section. For latest information on each function, please refer to the header file.

1. FPDFVIEW Operation (Base Module)

FPDF_InitLibrary
Initialize the FPDFSDK library. Prototype: void Parameters: hInstance Return value: None. Comments: You have to call this function before you can call any PDF processing functions. For WIN32 system only: the instance of the executable or DLL module FPDF_InitLibrary(void* hInstance);

FPDF_GetModuleMgr
Get the module of this DLL. Prototype: FPDF_MODULEMGR Parameters: None. Return value: FPDF_MODULEMGR The handle of this module. FPDF_GetModuleMgr();

FPDF_DestroyLibary
Release all resources allocated by the FPDFSDK library. Prototype: Void Parameters: None. Return value: None. Comments: FPDF_DestroyLibrary();

19

Programming Guide

You can call this function to release all memory blocks allocated by the library. After this function called, you should not call any PDF processing functions.

FPDF_UnlockDLL
Unlock the DLL using license key info received from Foxit Prototype: void Parameters: license_id unlock_code Return value: None. Comments: For SDK evaluators, this function call is not required, then all rendered pages will come with an evaluation mark. For purchased SDK customers, this should be the first function to call before any other functions to be called. A string received from Foxit identifying the SDK license. A string received from Foxit for unlocking the DLL. FPDF_UnlockDLL(FPDF_BYTESTRING license_id, FPDF_BYTESTRING unlock_code);

FPDF_LoadDocument
Open and load a PDF document. Prototype: FPDF_DOCUMENT Parameters: file_path password Path to the PDF file (including extension) A string used as the password for PDF file. If no password needed, empty or NULL can be used. FPDF_LoadDocument(FPDF_STRING file_path, FPDF_BYTESTRING password);

Return value: A handle to the loaded document. If failed, NULL is returned. Comments: Loaded document can be closed by FPDF_CloseDocument. If this function fails, you can use FPDF_GetLastError() to retrieve the reason why it fails.

FPDF_LoadMemDocument
Open and load a PDF document from memory. Prototype: FPDF_DOCUMENT Parameters: data_buf Pointer to a buffer containing the PDF document. FPDF_LoadMemDocument(const void* data_buf, int size, FPDF_BYTESTRING password);

20

Programming Guide

size password Return value:

Number of bytes in the PDF document. A string used as the password for PDF file. If no password needed, empty or NULL can be used.

A handle to the loaded document. If failed, NULL is returned. Comments: The memory buffer must remain valid when the document is open. Loaded document can be closed by FPDF_CloseDocument. If this function fails, you can use FPDF_GetLastError() to retrieve the reason why it fails. // Structure for custom file access typedef struct { // File length, in bytes unsigned long m_FileLen; // A function pointer for getting a block of data from specific position. // Position is specified by byte offset from beginning of the file. // The position and size will never go out range of file length. // It may be possible for FPDFSDK to call this function multiple times for same position. // Return value: should be non-zero if successful, zero for error. int (*m_GetBlock)(void* param, unsigned long position, unsigned char* pBuf, unsigned long size); // A custom pointer for all implementation specific data. // This pointer will be used as the first parameter to m_GetBlock callback. void* m_Param; } FPDF_FILEACCESS

FPDF_LoadCustomDocument
Load PDF document from a custom access descriptor. Prototype: FPDF_DOCUMENT Parameters: pFileAccess password Return value: A handle to the loaded document. If failed, NULL is returned. Comments: The file resources should stay valid until the PDF document is closed. A structure for access the file. Optional password for decrypting the PDF file. FPDF_LoadCustomDocument(FPDF_FILEACCESS* pFileAccess, FPDF_BYTESTRING password);

21

Programming Guide

Loaded document can be closed by FPDF_CloseDocument.

FPDF_GetLastError
Get last error code when an SDK function failed. Prototype: unsigned long Parameters: None. Return value: A 32-bit integer indicating error codes (defined below). 0 no error 1 unknown error 2 file not found or could not be opened 3 file not in PDF format or corrupted 4 password required or incorrect password 5 unsupported security scheme 6 page not found or content error Comments: If the previous SDK call succeeded, the return value of this function is not defined. FPDF_GetLastError();

FPDF_GetDocPermission
Get file permission flags of the document. Prototype: unsigned long FPDF_GetDocPermissions(FPDF_DOCUMENT document); Parameters: document Handle to document. Returned by FPDF_LoadDocument function. Return value: A 32-bit integer indicating permission flags. Please refer to PDF Reference for detailed description. If the document is not protected, 0xffffffff will be returned.

FPDF_GetPageCount
Get total number of pages in a document. Prototype: int FPDF_GetPageCount(FPDF_DOCUMENT document); Parameters: document Handle to document. Returned by FPDF_LoadDocument function. Return value: Total number of pages in the document.

22

Programming Guide

FPDF_LoadPage
Load a page inside a document. Prototype: FPDF_PAGE FPDF_LoadPage(FPDF_DOCUMENT document, int page_index); Parameters: document Handle to document. Returned by FPDF_LoadDocument function. page_index Index number of the page. 0 for the first page. Return value: A handle to the loaded page. If failed, NULL is returned. Comments: Loaded page can be rendered to devices using FPDF_RenderPage function. Loaded page can be closed by FPDF_ClosePage.

FPDF_GetPageWidth
Get page width Prototype: double FPDF_GetPageWidth(FPDF_PAGE page); Parameters: page Handle to the page. Returned by FPDF_LoadPage function. Return value: Page width (excluding non-displayable area) measured in points. One point is 1/72 inch (around 0.3528 mm)

FPDF_GetPageHeight
Get page height Prototype: double Parameters: page Handle to the page. Returned by FPDF_LoadPage function. Return value: Page height (excluding non-displayable area) measured in points. One point is 1/72 inch (around 0.3528 mm) FPDF_GetPageHeight(FPDF_PAGE page);

FPDF_ GetPageSizeByIndex
Get the size of a page by index. Prototype: int Parameters: FPDF_GetPageSizeByIndex(FPDF_DOCUMENT document, int page_index, double* width, double* height);

23

Programming Guide

document Handle to document. Returned by FPDF_LoadDocument function. page_index Page index, zero for the first page. width Pointer to a double value receiving the page width (in points). height Pointer to a double value receiving the page height (in points). Return value: Non-zero for success. 0 for error (document or page not found).

FPDF_EnumPageSize
Enumerating all pages within the document. Prototype: void Parameters: document Handle to document. Returned by FPDF_LoadDocument function. callback A pointer to a callback function, void (*FPDF_ENUMPAGESIZEPROC)(int page_index, double width, double height) Parameters: page_index Page index, zero for the first page. width The page width. height The page height. Return value: None. Return value: None. FPDF_EnumPageSize(FPDF_DOCUMENT document, FPDF_ENUMPAGESIZEPROC callback);

FPDF_RenderPage
Render contents in a page to a device (screen, bitmap, or printer). This function is only supported on Windows system. Prototype: void Parameters: dc page start_x start_y size_x size_y rotate Handle to device context. Handle to the page. Returned by FPDF_LoadPage function. Left pixel position of the display area in the device coordinate. Top pixel position of the display area in the device coordinate. Horizontal size (in pixels) for displaying the page. Vertical size (in pixels) for displaying the page. Page orientation: 0 (normal), 1 (rotated 90 degrees clockwise), 2 (rotated 180 degrees), 3 (rotated 90 degrees counter-clockwise). FPDF_RenderPage(HDC dc, FPDF_PAGE page, int start_x, int start_y, int size_x, int size_y, int rotate, int flags);

24

Programming Guide

flags

0 for normal display, or combination of flags defined below 0x01 Set if annotations are to be rendered 0x02 Set if using text rendering optimized for LCD display 0x04 Set if you don't want to use GDI+ Applicable to desktop Windows systems only. 0x08 Grayscale output 0x80 Set if you want to get some debug info. 0x100 Set if you don't want to catch exception

Return value: None.

FPDF_RenderPageBitmap
Render contents in a page to a device-independent bitmap Prototype: void Parameters: bitmap page start_x start_y size_x size_y rotate flags Return value: None. Handle to the device independent bitmap (as the output buffer). Bitmap handle can be created by FPDFBitmap_Create function. Handle to the page. Returned by FPDF_LoadPage function. Left pixel position of the display area in the device coordinate Top pixel position of the display area in the device coordinate Horizontal size (in pixels) for displaying the page Vertical size (in pixels) for displaying the page Page orientation: 0 (normal), 1 (rotated 90 degrees clockwise), 2 (rotated 180 degrees), 3 (rotated 90 degrees counter-clockwise). 0 for normal display, or combination of flags defined above FPDF_RenderPageBitmap(FPDF_BITMAP bitmap, FPDF_PAGE page, int start_x, int start_y, int size_x, int size_y, int rotate, int flags);

FPDF_QuickDrawPage
Draw a thumbnail of a page into a bitmap Prototype: void Parameters: bitmap page start_x Handle to the device-independent bitmap (as the output buffer). Bitmap handle can be created by FPDFBitmap_Create function. Handle to the page. Returned by FPDF_LoadPage function. Left pixel position of the display area in the device coordinate FPDF_QuickDrawPage(FPDF_BITMAP bitmap, FPDF_PAGE page, int start_x, int start_y, int size_x, int size_y, int rotate, int flags);

25

Programming Guide

start_y size_x size_y rotate

flags Return value: None. Comments: This functions draws a very low-resolution thumbnail of a page, sometimes with inaccurate shape or position. The result thumbnail is meant for a very rough preview of the page contents, just giving user some idea about how the page looks like. The thumbnail is often useful in multi-threaded or progressive environment, the application can first display the low-resolution thumbnail, start to respond to user input, and a higher resolution thumbnail can be generated by FPDF_RenderPageBitmap function.

Top pixel position of the display area in the device coordinate Horizontal size (in pixels) for displaying the page Vertical size (in pixels) for displaying the page Page orientation: 0 (normal), 1 (rotated 90 degrees clockwise), 2 (rotated 180 degrees), 3 (rotated 90 degrees counter-clockwise). Currently must be zero.

FPDF_ClosePage
Close a loaded PDF page. Prototype: void Parameters: page Return value: None. Handle to the loaded page FPDF_ClosePage(FPDF_PAGE page);

FPDF_CloseDocument
Close a loaded PDF document. Prototype: void Parameters: document Return value: None. Handle to the loaded document FPDF_CloseDocument(FPDF_DOCUMENT document);

FPDF_DeviceToPage
Convert the screen coordinate of a point to page coordinate. Prototype: void FPDF_DeviceToPage(FPDF_PAGE page, int start_x, int start_y, int size_x, int size_y, int rotate, int device_x, int device_y, double* page_x, double* page_y);

26

Programming Guide

Parameters: page start_x start_y size_x size_y rotate device_x device_y page_x page_y Return value: None. Comments: The page coordinate system has its origin at left-bottom corner of the page, with X axis goes along the bottom side to the right, and Y axis goes along the left side upward. NOTE: this coordinate system can be altered when you zoom, scroll, or rotate a page, however, a point on the page should always have the same coordinate values in the page coordinate system. The device coordinate system is device dependant. For screen device, its origin is at left-top corner of the window. However this origin can be altered by Windows coordinate transformation utilities. You must make sure the start_x, start_y, size_x, size_y and rotate parameters have exactlysame values as you used in FPDF_RenderPage() function call. Handle to the page. Returned by FPDF_LoadPage function. Left pixel position of the display area in the device coordinate Top pixel position of the display area in the device coordinate Horizontal size (in pixels) for displaying the page Vertical size (in pixels) for displaying the page Page orientation: 0 (normal), 1 (rotated 90 degrees clockwise), 2 (rotated 180 degrees), 3 (rotated 90 degrees counter-clockwise). X value in device coordinate, for the point to be converted Y value in device coordinate, for the point to be converted A pointer to a double value receiving the converted X value in page coordinate A pointer to a double value receiving the converted Y value in page coordinate

FPDF_PageToDevice
Convert the page coordinate of a point to screen coordinate. Prototype: void Parameters: page start_x start_y size_x size_y rotate page_x Handle to the page. Returned by FPDF_LoadPage function. Left pixel position of the display area in the device coordinate Top pixel position of the display area in the device coordinate Horizontal size (in pixels) for displaying the page Vertical size (in pixels) for displaying the page Page orientation: 0 (normal), 1 (rotated 90 degrees clockwise), 2 (rotated 180 degrees), 3 (rotated 90 degrees counter-clockwise). X value in page coordinate, for the point to be converted FPDF_PageToDevice(FPDF_PAGE page, int start_x, int start_y, int size_x, int size_y, int rotate, double page_x, double page_y, int* device_x, int* device_y);

27

Programming Guide

page_y Y value in page coordinate, for the point to be converted device_x A pointer to an integer value receiving the result X value in device coordinate. device_y A pointer to an integer value receiving the result Y value in device coordinate. Return value: None Comments: See comments of FPDF_DeviceToPage() function.

FPDFBitmap_Create
Create a Foxit Device-Independent Bitmap (FXDIB) Prototype: FPDF_BITMAP FPDFBitmap_Create(int width, int height, int alpha); Parameters: width height alpha Number of pixels in a horizontal line of the bitmap. Must be greater than 0. Number of pixels in a vertical line of the bitmap. Must be greater than 0. A flag indicating whether alpha channel is used. Non-zero for using alpha, zero for not using.

Return value: The created bitmap handle, or NULL if parameter error or out of memory. Comments: An FXDIB always use 4 byte per pixel. The first byte of a pixel is always double word aligned. Each pixel contains red (R), green (G), blue (B) and optionally alpha (A) values. The byte order is BGRx (the last byte unused if no alpha channel) or BGRA. The pixels in a horizontal line (also called scan line) are stored side by side, with left most pixel stored first (with lower memory address). Each scan line uses width*4 bytes. Scan lines are stored one after another, with top most scan line stored first. There is no gap between adjacent scan lines. This function allocates enough memory for holding all pixels in the bitmap, but it doesn't initialize the buffer. Applications can use FPDFBitmap_FillRect to fill the bitmap using any color.

FPDFBitmap_CreateEx
Create a Foxit Device-Independent Bitmap (FXDIB) Prototype: FPDF_BITMAP FPDFBitmap_CreateEx(int width, int height, int format, void* first_scan, int stride); Parameters: width height format Number of pixels in a horizontal line of the bitmap. Must be greater than 0. Number of pixels in a vertical line of the bitmap. Must be greater than 0. A number indicating for bitmap format, as defined below 1 Gray scale bitmap, one byte per pixel

28

Programming Guide

first_scan

stride Return value: The created bitmap handle, or NULL if parameter error or out of memory. Comments: Similar to FPDFBitmap_Create function, with more formats and external buffer supported. Bitmap created by this function can be used in any place that a FPDF_BITMAP handle is required. If external scanline buffer is used, then the application should destroy the buffer by itself. FPDFBitmap_Destroy function will not destroy the buffer.

2 3 bytes per pixel, byte order: blue, green, red 3 4 bytes per pixel, byte order: blue, green, red, unused 4 4 bytes per pixel, byte order: blue, green, red, alpha A pointer to the first byte of first scan line, for external buffer only. If this parameter is NULL, then the SDK will create its own buffer. Number of bytes for each scan line, for external buffer only..

FPDFBitmap_FillRect
Fill a rectangle area in an FXDIB Prototype: void Parameters: bitmap The handle to the bitmap. Returned by FPDFBitmap_Create function. left The left side position. Starting from 0 at the left-most pixel. top The top side position. Starting from 0 at the top-most scan line. width Number of pixels to be filled in each scan line. height Number of scan lines to be filled. red A number from 0 to 255, identifying the red intensity green A number from 0 to 255, identifying the green intensity blue A number from 0 to 255, identifying the blue intensity alpha (Only if the alpha channeled is used when bitmap created) A number from 0 to 255, identifying the alpha value. Return value: None Comments: This function set the color and (optionally) alpha value in specified region of the bitmap. NOTE: If alpha channel is used, this function does NOT composite the background with the source color, instead the background will be replaced by the source color and alpha. If alpha channel is not used, the "alpha" parameter is ignored. FPDFBitmap_FillRect(FPDF_BITMAP bitmap, int left, int top, int width, int height, int red, int green, int blue, int alpha);

29

Programming Guide

FPDFBitmap_GetBuffer
Get data buffer of an FXDIB Prototype: void* Parameters: bitmap Handle to the bitmap. Returned by FPDFBitmap_Create function. Return value: The pointer to the first byte of the bitmap buffer. Comments: Applications can use this function to get the bitmap buffer pointer, then manipulate any color and/or alpha values for any pixels in the bitmap. FPDFBitmap_GetBuffer(FPDF_BITMAP bitmap);

FPDFBitmap_GetWidth
Get width of an FXDIB Prototype: int Parameters: bitmap Handle to the bitmap. Returned by FPDFBitmap_Create function. Return value: The number of pixels in a horizontal line of the bitmap. FPDFBitmap_GetWidth(FPDF_BITMAP bitmap);

FPDFBitmap_GetHeight
Get height of an FXDIB Prototype: int Parameters: bitmap Handle to the bitmap. Returned by FPDFBitmap_Create function. Return value: The number of pixels in a vertical line of the bitmap. FPDFBitmap_GetHeight(FPDF_BITMAP bitmap);

FPDFBitmap_GetStride
Get number of bytes for each scan line in the bitmap buffer Prototype: int Parameters: bitmap Handle to the bitmap. Returned by FPDFBitmap_Create function. Return value: The number of bytes for each scan line in the bitmap buffer. FPDFBitmap_GetStride(FPDF_BITMAP bitmap);

30

Programming Guide

FPDFBitmap_Destroy
Destroy an FXDIB and release all related buffers Prototype: void Parameters: bitmap Handle to the bitmap. Returned by FPDFBitmap_Create function. Return value: None. Comments: This function will not destroy any external buffer. FPDFBitmap_Destroy(FPDF_BITMAP bitmap);

FPDF_AllocMemory
Allocated memory block in FPDFSDK. This memory can be freed by FPDF_FreeMemory function. Prototype: void* FPDF_AllocMemory(unsigned long size); Parameters: size Byte size of requested memory block. Can not be zero. Return value: The allocated pointer. NULL if memory not available. Comments: Some FPDFSDK interface may require application to allocate memory for internal use of FPDFSDK. In this case application must call this function to allocate memory, don't use malloc() or other memory allocator. If an error handler installed and exception/long jump is used in the out of memory handling, this function might never return if no memory available.

FPDF_FreeMemory
Free a memory area allocated by Foxit SDK. Prototype: void FPDF_FreeMemory(void* p); Parameters: p The pointer. Should not be NULL. Return value: None. Comments: In case FPDFSDK allocated some memory for user application, the user application must free it to avoid memory leakage. And the application must call FPDF_FreeMemory function to do that. Do NOT use c/c++ memory free() function or other similar functions.

31

Programming Guide

FPDF_SetErrorHandler
Set a call back function when FPDFSDK has some error to report Prototype: void FPDF_SetErrorHandler(FPDF_ErrorHandler func); Parameters: func Return value: None. Comments: Currently only two error codes are defined (see above). Pointer to the error handler function

FPDF_SetModulePath
Set the folder path for module files (like the FPDFCJK.BIN). Prototype: void FPDF_SetModulePath(FPDF_STRING module_name, FPDF_STRING folder_name); Parameters: module_name folder_name Return value: None. Name of the module. Currently please use NULL (0) only. Name of the folder. For example: "C:\\program files\\FPDFSDK".

FPDF_SetGlyphProvider
Make use of a custom glyph bitmap provider. Not available on Desktop Windows system. Prototype: void FPDF_SetGlyphProvider(FPDF_GLYPHPROVIDER* pProvider); Parameters: pProvider Pointer to a provider structure. This structure must be available all the time (better put it in static data). And all member interfaces of this structure should be properly set and implemented.

Return value: None.

FPDF_SetSystemFontFile
Make use of a system font. The font file must be in TrueType or Type1 format and must be encoded in a standard encoding system. Available for embedded Linux system only. Prototype:

32

Programming Guide

int Parameters:

FPDF_SetSystemFontFile(FPDF_BYTESTRING file_path);

file_path The full path of the font file. Return value: Non-zero for success. Zero for error.

FPDF_SetWCEFontMapper
For Windows Mobile Only: make use of a font mapper for CJK charsets. This function should be called before page rendering. Prototype: void FPDF_SetWCEFontMapper(FPDF_WCEFONTMAPPER* mapper); Parameters: mapper Pointer to the mapper structure. Return value: None.

2. FPDFDOC Operation (Base Module)

FPDFBookmark_GetFirstChild
Get first child of a bookmark item, or first top level bookmark item. Prototype: FPDF_BOOKMARK FPDFBookmark_GetFirstChild(FPDF_DOCUMENT document, FPDF_BOOKMARK bookmark); Parameters: document bookmark Return value: Handle to the first child or top level bookmark item. NULL if no child or top level bookmark found. Handle to the document. Returned by FPDF_LoadDocument or FPDF_LoadMemDocument. Handle to the current bookmark. Can be NULL if you want to get the first top level item.

FPDFBookmark_GetNextSibling
Get next bookmark item on the same level. Prototype: FPDF_BOOKMARK FPDFBookmark_GetNextSibling(FPDF_DOCUMENT document, FPDF_BOOKMARK bookmark); Parameters: document Handle to the document. Returned by FPDF_LoadDocument or FPDF_LoadMemDocument.

33

Programming Guide

bookmark Return value:

Handle to the current bookmark. Cannot be NULL.

Handle to the next bookmark item on the same level. NULL if this is the last bookmark on this level.

FPDFBookmark_Find
Find a bookmark in the document, using the bookmark title Prototype: FPDF_BOOKMARK Parameters: document title Handle to the document. Returned by FPDF_LoadDocument or FPDF_LoadMemDocument The UTF-16LE encoded Unicode string for the bookmark title to be searched. Can't be NULL. FPDFBookmark_Find(FPDF_DOCUMENT document, FPDF_WIDESTRING title);

Return value: Handle to the found bookmark item. NULL if the title can't be found. Comments: It always returns the first found bookmark if more than one bookmarks have the same title.

FPDFBookmark_GetColorRef
Get designated color of a bookmark item Prototype: unsigned long Parameters: bookmark Handle to the bookmark Return value: A COLORREF value (0x00ggbbrr) for the bookmark item. FPDFBookmark_GetColorRef(FPDF_BOOKMARK bookmark);

FPDFBookmark_GetFontStyle
Get designated font style for a bookmark item Prototype: unsigned long Parameters: bookmark Handle to the bookmark Return value: A number indicating the font style, as defined below 0 Normal 1 Italic FPDFBookmark_GetFontStyle(FPDF_BOOKMARK bookmark);

34

Programming Guide

2 3

Bold Bolditalic

FPDFBookmark_GetTitle
Get title of a bookmark Prototype: unsigned long Parameters: bookmark Handle to the bookmark buffer A buffer for output the title. Can be NULL. buflen The length of the buffer, number of bytes. Can be 0. Return value: Number of bytes the title consumes, including trailing zeroes. Comments: No matter on what platform, the title is always output in UTF-16LE encoding, which means the buffer can be regarded as an array of WORD (on Intel and compatible CPUs), each WORD represent the Unicode of a character (some special Unicode may take 2 WORDs). The string is followed by two bytes of zero indicating end of the string. The return value always indicated number of bytes required for the buffer, even when there is no buffer specified, or the buffer size is less then required. In this case, the buffer will not be modified. FPDFBookmark_GetTitle(FPDF_BOOKMARK bookmark, void* buffer, unsigned long buflen);

FPDFBookmark_GetAction
Get the action associated with a bookmark item Prototype: FPDF_ACTION Parameters: bookmark Handle to the bookmark Return value: Handle to the action data. NULL if no action is associated with this bookmark. In this case, the application should try FPDFBookmark_GetDest FPDFBookmark_GetAction(FPDF_BOOKMARK bookmark);

FPDFBookmark_GetDest
Get the destination associated with a bookmark item Prototype: FPDF_DEST FPDFBookmark_GetDest(FPDF_DOCUMENT document, FPDF_BOOKMARK bookmark); Parameters: document Handle to the document

35

Programming Guide

bookmark Handle to the bookmark Return value: Handle to the destination data. NULL if no destination is associated with this bookmark

FPDFBookmark_GetPageFirstLine
Get first text line of the page, which can be used for alternative bookmark, if no bookmark is available Prototype: Int Parameters: page The page handle buffer A buffer for output the title. Can be NULL. buflen The length of the buffer, number of bytes. Can be 0. Return value: Number of bytes the text line consumes, including trailing zeroes. Comments: No matter on what platform, the title is always output in UTF-16LE encoding, which means the buffer can be regarded as an array of WORD (on Intel and compatible CPUs), each WORD represent the Unicode of a character (some special Unicode may take 2 WORDs). The string is followed by two bytes of zero indicating end of the string. The return value always indicated number of bytes required for the buffer, even when there is no buffer specified, or the buffer size is less then required. In this case, the buffer will not be modified. Note: This is a temporary function. Itwill be deleted soon. FPDFBookmark_GetPageFirstLine(FPDF_PAGE page, void* buffer, int buflen);

FPDFAction_GetType
Get type of an action Prototype: unsigned long Parameters: action Return value: A type number as defined below 0 Unsupported action type. 1 Go to a destination within current document. 2 Go to a destination within another document. 3 Universal Resource Identifier, including web pages and other Internet based resources. 4 Launch an application or open a file. Handle to the action FPDFAction_GetType(FPDF_ACTION action);

36

Programming Guide

FPDFAction_GetFilePath
Get file path of an remote goto action Prototype: unsigned long Parameters: action buffer buflen Return value: Number of bytes the file path consumes, including trailing zero. Comments: The file path is output in local encoding. The return value always indicated number of bytes required for the buffer, even when there is no buffer specified, or the buffer size is less then required. In this case, the buffer will not be modified. Handle to the action. Must be a RMEOTEGOTO or LAUNCH action A buffer for output the path string. Can be NULL. The length of the buffer, number of bytes. Can be 0. FPDFAction_GetFilePath(FPDF_ACTION action, void* buffer, unsigned long buflen);

FPDFAction_GetDest
Get destination of an action Prototype: FPDF_DEST FPDFAction_GetDest(FPDF_DOCUMENT document, FPDF_ACTION action); Parameters: document action Return value: Handle to the destination data. Comments: In case of remote goto action, the application should first use FPDFAction_GetFilePath to get file path, then load that particular document, and use its document handle to call this function. Handle to the document. Handle to the action. It must be a GOTO or REMOTEGOTO action.

FPDFAction_GetURIPath
Get URI path of a URI action Prototype: unsigned long FPDFAction_GetURIPath(FPDF_DOCUMENT document, FPDF_ACTION action, void* buffer, unsigned long buflen); Parameters: document action buffer Handle to the document. Handle to the action. Must be a URI action A buffer for output the path string. Can be NULL.

37

Programming Guide

buflen Return value:

The length of the buffer, number of bytes. Can be 0.

Number of bytes the URI path consumes, including trailing zero. Comments: The URI path is always encoded in 7-bit ASCII. The return value always indicated number of bytes required for the buffer, even when there is no buffer specified, or the buffer size is less then required. In this case, the buffer will not be modified.

FPDFDest_GetPageIndex
Get page index of a destination Prototype: unsigned long FPDFDest_GetPageIndex(FPDF_DOCUMENT document, FPDF_DEST dest); Parameters: document dest Return value: The page index. Starting from 0 for the first page. Handle to the document Handle to the destination

FPDFDest_GetZoomMode
Get the designated zoom mode of a destination Prototype: unsigned long FPDFDest_GetZoomMode(FPDF_DEST dest); Parameters: dest Return value: The zoom mode as defined below 1 Zoom level with specified offset. 2 Fit both the width and height of the page (whichever smaller). 3 Fit the page width. 4 Fit the page height. 5 Fit a specific rectangle area within the window. Handle to the destination

FPDFDest_GetZoomParam
Get zoom parameters. Prototype: double FPDFDest_GetZoomParam(FPDF_DEST dest, int param); Parameters: dest Handle to the destination.

38

Programming Guide

param Return value:

Index of the parameter, starting with zero (see comments below).

A float number for the zoom parameter. Comments: Different zoom mode has different parameters. Here is a list: XYZ Three parameters: x, y position in the page and the zoom ratio (0 for not specified). FITPAGE No parameters; FITHORZ One parameter: the top margin of the page. FITVERT One parameter: the left margin of the page. FITRECT Four parameters: the left, top, right, bottom margin of the fitting rectangle. Use 0-3 as parameter index for them, respectively.

FPDFLink_GetLinkAtPoint
Find a link at specified point on a document page Prototype: FPDF_LINK FPDFLink_GetLinkAtPoint(FPDF_PAGE page, double x, double y); Parameters: page x y Return value: Handle to the link. NULL if theres no link at that point. Comments: The point coordinate are specified in page coordinate system. You can convert coordinate from screen system to page system using FPDF_DeviceToPage functions. Handle to the document page The x coordinate of the point, specified in page coordinate system. The y coordinate of the point, specified in page coordinate system.

FPDFLink_GetDest
Get destination info of a link. Prototype: FPDF_DEST FPDFLink_GetDest(FPDF_DOCUMENT document, FPDF_LINK link); Parameters: document link Return value: Handle to the destination. NULL if there is no destination associated with the link, in this case the application should try FPDFLink_GetAction Handle to the document Handle to the link. Returned by FPDFLink_GetLinkAtPoint

39

Programming Guide

FPDFLink_GetAction
Get action info of a link Prototype: FPDF_ACTION Parameters: link Return value: Handle to the action. NULL if there is no action associated with the link. Handle to the link. FPDFLink_GetAction(FPDF_LINK link);

FPDF_ GetPageThumbnail
Get stored thumbnail image of a page. Only supported on Windows system. Prototype: HBITMAP FPDF_GetPageThumbnail(FPDF_PAGE page); Parameters: page Return value: Handle to a Windows bitmap storing the thumbnail. NULL if no thumbnail is stored for this page. Comments: If no thumbnail is stored for a page, the application can render the page into a small bitmap for thumbnail. The application should free the image with DeleteObject WIN32 function, when it's done with the thumbnail. NOTE: This function is not supported on Windows CE. Handle to a page.

FPDF_GetMetaText
Get a text from metadata of the document. Result is encoded in UTF-16LE. Prototype: unsigned long Parameters: doc tag A document handle The tag for the meta data. Currently, It can be "Title", "Author", "Subject", "Keywords", "Creator", "Producer", "CreationDate", or "ModDate". For detailed explanation of these tags and their respective values, please refer to PDF Reference 1.6, section 10.2.1, "Document Information Dictionary". A buffer for output the title. Can be NULL. The length of the buffer, number of bytes. Can be 0. FPDF_GetMetaText(FPDF_DOCUMENT doc, FPDF_BYTESTRING tag, void* buffer, unsigned long buflen);

buffer buflen Return value:

Number of bytes the title consumes, including trailing zeros.

40

Programming Guide

Comments: No matter on what platform, the title is always outputted in UTF-16LE encoding, which means the buffer can be regarded as an array of WORD (on Intel and compatible CPUs), each WORD represents the Unicode of a character (some special Unicode may take 2 WORDs). The string is followed by two bytes of zero indicating the end of the string. The return value always indicates number of bytes required for the buffer, even when there is no buffer specified, or the buffer size is less than required. In this case, the buffer will not be modified.

3. FPDFTEXT Operation (Text Module)

FPDFText_LoadPage
Prepare information about all characters in a page. Prototype: FPDF_TEXTPAGE Parameters: page Return value: A handle to the text page information structure. NULL if something goes wrong. Comments: Application must call FPDFText_ClosePage to release the text page information. If you didnt purchase Text Module , this function will return NULL. Handle to the page. Returned by FPDF_LoadPage function FPDFText_LoadPage(FPDF_PAGE page);

FPDFText_ClosePage
Release all resources allocated for a text page information structure Prototype: void FPDFText_ClosePage(FPDF_TEXTPAGE text_page); Parameters: text_page Return Value: None. Handle to a text page information structure. Returned by FPDFText_LoadPage function.

FPDFText_CountChars
Get number of characters in a page Prototype: Int Parameters: text_page Handle to a text page information structure. FPDFText_CountChars(FPDF_TEXTPAGE text_page);

41

Programming Guide

Returned by FPDFText_LoadPage function. Return value: Number of characters in the page. Return -1 for error. Generated characters, like additional space characters, new line characters, are also counted. Comments: Characters in a page form a "stream", inside the stream, each character has an index. We will use the index parameters in many of FPDFTEXT functions. The first character in the page has an index value of zero.

FPDFText_GetUnicode
Get Unicode of a character in a page Prototype: unsigned int Parameters: text_page index Return value: The Unicode of the particular character. If a character is not encoded in Unicode and Foxit engine can't convert to Unicode, the return value will be zero. Handle to a text page information structure. Returned by FPDFText_LoadPage function. Zero-based index of the character FPDFText_GetUnicode(FPDF_TEXTPAGE text_page, int index);

FPDFText_IsGenerated
Indicates whether a character is a generated character Prototype: FPDF_BOOL Parameters: text_page index Return value: TRUE indicates a generated character and FALSE indicates an actual character in the PDF page. Comments: "Generated character" is character not actually encoded in the PDF page, but generated by FPDFTEXT engine to keep formatting information. This happens in two cases: 1) an extra space character will be generated if two characters in the same line appears to be apart quite some space Handle to a text page information structure. Returned by FPDFText_LoadPage function. Zero-based index of the character FPDFText_IsGenerated(FPDF_TEXTPAGE text_page, int index);

42

Programming Guide

2) a new line character will be generated if two consecutive characters appears to be on different line. This characters are useful when doing the search.

FPDFText_GetFontSize
Get the font size of a particular character Prototype: double FPDFText_GetFontSize(FPDF_TEXTPAGE text_page, int index); Parameters: text_page index Return value: The font size of the particular character, measured in points (about 1/72 inch). This is the typographic size of the font (so called "em size"). Handle to a text page information structure. Returned by FPDFText_LoadPage function. Zero-based index of the character.

FPDFText_GetOrigin
Get origin position of a particular character Prototype: Void Parameters: text_page index x y Return Value: None. Comments: Origin X/Y positions are measured in PDF "user space". Handle to a text page information structure. Returned by FPDFText_LoadPage function. Zero-based index of the character. Pointer to a double number receiving X position of the character origin. Pointer to a double number receiving Y position of the character origin. FPDFText_GetOrigin(FPDF_TEXTPAGE text_page, int index, double* x, double* y);

FPDFText_GetCharBox
Get bounding box of a particular character Prototype: void Parameters: text_page index Handle to a text page information structure. Returned by FPDFText_LoadPage function. Zero-based index of the character. FPDFText_GetCharBox(FPDF_TEXTPAGE text_page, int index, double* left, double* right, double* bottom, double* top);

43

Programming Guide

left right bottom top Return Value: None. Comments:

Pointer to a double number receiving left position of the character box. Pointer to a double number receiving right position of the character box. Pointer to a double number receiving bottom position of the character box. Pointer to a double number receiving top position of the character box.

All positions are measured in PDF "user space".

FPDFText_GetMatrix
Get the matrix of a particular character. Prototype: void Parameters: text_page index a b c d Return value: None. Comments: A matrix defines transformation of coordinate from one space to another. In PDF, a matrix is defined by the following equations: x' = a * x + c * y + e; y' = b * x + d * y + f; FPDFText_GetMatrix function is used to get a,b,c,d coefficients of the transformation from "text space" to "user space". The e, f coefficients are actually the origin position, which can be fetched by FPDFText_GetOrigin function. Handle to a text page information structure. Returned by FPDFText_LoadPage function. Zero-based index of the character Pointer to a double value receiving coefficient "a" of the matrix Pointer to a double value receiving coefficient "b" of the matrix Pointer to a double value receiving coefficient "c" of the matrix Pointer to a double value receiving coefficient "d" of the matrix FPDFText_GetMatrix(FPDF_TEXTPAGE text_page, int index, double* a, double* b, double* c, double* d);

FPDFText_GetFont
Get font of a particular character Prototype: FPDF_FONT Parameters: text_page Handle to a text page information structure. Returned by FPDFText_LoadPage function. FPDFText_GetFont(FPDF_TEXTPAGE text_page, int index);

44

Programming Guide

index Return value:

Zero-based index of the character.

A handle to the font used by the particular character. This handle can be used in FPDFFont_xxx functions for more information about the font.

FPDFFont_GetAscent
Get font ascent (in 1/1000 em) Prototype: int Parameters: font Return value: The ascent (typically the above-baseline height of letter "h"), measured in 1/1000 of em size. So if a character uses a font size (em size) of 10 points, and it has an ascent value of 500 (meaning half of the em), then the ascent height will be 5 points (5/72 inch). Handle to a font. Returned by FPDFText_GetFont function. FPDFFont_GetAscent(FPDF_FONT font);

FPDFFont_GetDescent
Get font descent (in 1/1000 em) Prototype: int FPDFFont_GetDescent(FPDF_FONT font); Parameters: font Return value: The descent (typically the under-baseline height of letter "g"), measured in 1/1000 of em size. Most fonts have a negative descent value. Handle to a font. Returned by FPDFText_GetFont function.

FPDFFont_GetName
Get the Name of a font. Prototype: FPDF_BYTESTRING Parameters: font Return value: A pointer to a null-terminated string that specifies the name of the font. Application can't modify the returned string. Handle to a font. Returned by FPDFText_GetFont function. FPDFFont_GetName(FPDF_FONT font);

FPDFText_GetCharIndexAtPos
Get the index of a character at or nearby a certain position on the page

45

Programming Guide

Prototype: Int Parameters: text_page x y xTolerance yTolerance Return Value: The zero-based index of the character at, or nearby the point (x,y). If there is no character at or nearby the point, return value will be -1. If an error occurs, -3 will be returned. Handle to a text page information structure. Returned by FPDFText_LoadPage function. X position in PDF "user space". Y position in PDF "user space". An x-axis tolerance value for character hit detection, in point unit. A y-axis tolerance value for character hit detection, in point unit. FPDFText_GetCharIndexAtPos(FPDF_TEXTPAGE text_page, double x, double y, double xTorelance, double yTolerance);

FPDFText_GetCharIndexByDirection
Move the character index in different directions and get new character index, from a specific character. Prototype: int Parameters: text_page index direction Handle to a text page information structure. Returned by FPDFText_LoadPage function. Zero-based index for the current character A number indicating the moving direction. Can be one of the followings: FPDFTEXT_LEFT, FPDFTEXT_UP, FPDFTEXT_RIGHT, FPDFTEXT_DOWN FPDFText_GetCharIndexByDirection(FPDF_TEXTPAGE text_page, int index, int direction);

Return Value: Zero-base character index for the new position. -1 if beginning of the page reached; -2 if end of the page reached. -3 for failures. Comments: FPDFTEXT moves the character pointer according to "stream order". For example, left will move to the previous character, right will move to next character. Because in PDF, "stream order" can be different from "appearance order" (the order that appears to human eyes), so it's possible the moving direction doesn't match the actually position movement. For example, using FPDFTEXT_LEFT may actually result in a character that's all the way down in the page.

46

Programming Guide

FPDFText_GetText
Extract unicode text string from the page Prototype: int Parameters: text_page start_index count result Handle to a text page information structure. Returned by FPDFText_LoadPage function. Index for the start characters. Number of characters to be extracted. A buffer (allocated by application) receiving the extracted unicodes. The size of the buffer must be able to hold the number of characters plus a terminator. FPDFText_GetText(FPDF_TEXTPAGE text_page, int start_index, int count, unsigned short* result);

Return Value: Number of characters written into the result buffer, excluding the trailing terminator. Comments: This function ignores characters without unicode information.

FPDFText_CountRects
Count number of rectangular areas occupied by a segment of texts. Prototype: int Parameters: text_page start_index count Return value: Number of rectangles. Zero for error. Comments: This function, along with FPDFText_GetRect can be used by applications to detect the position on the page for a text segment, so proper areas can be highlighted or something. FPDFTEXT will automatically merge small character boxes into bigger one if those characters are on the same line and use same font settings. Handle to a text page information structure. Returned by FPDFText_LoadPage function. Index for the start characters Number of characters FPDFText_CountRects(FPDF_TEXTPAGE text_page, int start_index, int count);

FPDFText_GetRect
Get a rectangular area from the result generated by FPDFText_CountRects. Prototype:

47

Programming Guide

void Parameters:

FPDFText_GetRect(FPDF_TEXTPAGE text_page, int rect_index, double* left, double* top, double* right, double* bottom); Handle to a text page information structure. Returned by FPDFText_LoadPage function. Zero-based index for the rectangle. Pointer to a double value receiving the rectangle left boundary. Pointer to a double value receiving the rectangle top boundary. Pointer to a double value receiving the rectangle right boundary. Pointer to a double value receiving the rectangle bottom boundary.

text_page rect_index left top right bottom Return Value: None.

FPDFText_GetBoundedText
Extract unicode text within a rectangular boundary on the page Prototype: int Parameters: text_page left top right bottom buffer buflen Return Value: If buffer is NULL or buflen is zero, number of characters (not bytes) needed, otherwise, number of characters copied into the buffer. Handle to a text page information structure. Returned by FPDFText_LoadPage function. Left boundary. Top boundary. Right boundary. Bottom boundary. A unicode buffer. Number of characters (not bytes) for the buffer, excluding an additional terminator FPDFText_GetBoundedText(FPDF_TEXTPAGE text_page,double left, double top, double right, double bottom,unsigned short* buffer,int buflen);

FPDFText_CountBoundedSegments
Get number of text segments within a rectangular boundary on the page Prototype: int Parameters: text_page Handle to a text page information structure. Returned by FPDFText_LoadPage function. FPDFText_CountBoundedSegments(FPDF_TEXTPAGE text_page, double left, double top, double right, double bottom);

48

Programming Guide

left top right bottom Return Value:

Left boundary. Top boundary. Right boundary. Bottom boundary.

Number of segments.

FPDFText_GetBoundedSegment
Get a particular segment in the result generated by FPDFText_CountBoundedSegments function. Prototype: Void FPDFText_GetBoundedSegment(FPDF_TEXTPAGE text_page, int seg_index, int* start_index, int* count); Parameters: text_page Handle to a text page information structure. Returned by FPDFText_LoadPage function. seg_index Zero-based index for the segment start_index Pointer to an integer receiving the start character index for the segment. count Pointer to an integer receiving number of characters in the segment. Return Value: None.

FPDFText_FindStart
Start a search. Prototype: FPDF_SCHHANDLE FPDFText_FindStart(FPDF_TEXTPAGE text_page, FPDF_WIDESTRING findwhat, unsigned long flags, int start_index); Parameters: text_page Handle to a text page information structure. Returned by FPDFText_LoadPage function. A unicode match pattern. Option flags. Start from this character. -1 for end of the page.

Findwhat flags start_index Return Value: A handle for the search context. FPDFText_FindClose must be called to release this handle.

FPDFText_FindNext
Search in the direction from page start to end. Prototype:

49

Programming Guide

FPDF_BOOL Parameters: handle Return Value: -

FPDFText_FindNext(FPDF_SCHHANDLE handle); A search context handle returned by FPDFText_FindStart.

Whether a match is found.

FPDFText_FindPrev
Search in the direction from page end to start. Prototype: FPDF_BOOL Parameters: handle Return Value: Whether a match is found. A search context handle returned by FPDFText_FindStart. FPDFText_FindPrev(FPDF_SCHHANDLE handle);

FPDFText_GetSchResultIndex
Get the starting character index of the search result. Prototype: int Parameters: handle Return Value: Index for the starting character. A search context handle returned by FPDFText_FindStart. FPDFText_GetSchResultIndex(FPDF_SCHHANDLE handle);

FPDFText_GetSchCount
Get the number of matched characters in the search result. Prototype: int Parameters: handle Return Value: Number of matched characters. A search context handle returned by FPDFText_FindStart. FPDFText_GetSchCount(FPDF_SCHHANDLE handle);

FPDFText_FindClose
Release a search context. Prototype: void Parameters: FPDFText_FindClose(FPDF_SCHHANDLE handle);

50

Programming Guide

handle Return Value: None.

A search context handle returned by FPDFText_FindStart.

FPDFLink_LoadWebLinks
Prepare information about weblinks in a page. Prototype: FPDF_PAGELINK FPDFLink_LoadWebLinks(FPDF_TEXTPAGE text_page); Parameters: text_page Return Value: A handle to the page's links information structure. NULL if something goes wrong. Comments: Weblinks are those links implicitly embedded in PDF pages. PDF also has a type of annotation called "link", FPDFTEXT doesn't deal with that kind of link. FPDFTEXT weblink feature is useful for automatically detecting links in the page contents. For example, things like "http://www.foxitsoftware.com" will be detected, so applications can allow user to click on those characters to activate the link, even the PDF doesn't come with link annotations. FPDFLink_CloseWebLinks must be called to release resources. Handle to a text page information structure. Returned by FPDFText_LoadPage function.

FPDFLink_CountWebLinks
Count number of detected web links. Prototype: int Parameters: link_page Return Value: Number of detected web links. Handle returned by FPDFLink_LoadWebLinks. FPDFLink_CountWebLinks(FPDF_PAGELINK link_page);

FPDFLink_GetURL
Fetch the URL information for a detected web link. Prototype: int Parameters: link_page link_index Handle returned by FPDFLink_LoadWebLinks. Zero-based index for the link. FPDFLink_GetURL(FPDF_PAGELINK link_page, int link_index, unsigned short* buffer,int buflen);

51

Programming Guide

buffer buflen Return Value:

A unicode buffer. Number of characters (not bytes) for the buffer, excluding an additional terminator.

If buffer is NULL or buflen is zero, return number of characters (not bytes) needed, otherwise, return number of characters copied into the buffer.

FPDFLink_CountRects
Count number of rectangular areas for the link. Prototype: int Parameters: link_page link_index Return Value: Number of rectangular areas for the link. Handle returned by FPDFLink_LoadWebLinks. Zero-based index for the link. FPDFLink_CountRects(FPDF_PAGELINK link_page, int link_index);

FPDFLink_GetRect
Fetch the boundaries of a rectangle for a link. Prototype: Void Parameters: link_page link_index rect_index left top right bottom Return Value: None. Handle returned by FPDFLink_LoadWebLinks. Zero-based index for the link. Zero-based index for a rectangle. Pointer to a double value receiving the rectangle left boundary. Pointer to a double value receiving the rectangle top boundary. Pointer to a double value receiving the rectangle right boundary. Pointer to a double value receiving the rectangle bottom boundary. FPDFLink_GetRect(FPDF_PAGELINK link_page, int link_index, int rect_index, double* left, double* top,double* right, double* bottom);

FPDFLink_CloseWebLinks
Release resources used by weblink feature. Prototype: Void Parameters: link_page Handle returned by FPDFLink_LoadWebLinks. FPDFLink_CloseWebLinks(FPDF_PAGELINK link_page);

52

Programming Guide

Return Value: None.

FPDFText_PDFToText
Convert a PDF file to a TXT File. Prototype: FPDF_BOOL Parameters: sour_file dest_file flag password Return value: TURE for succeed, False for failed. Path to the PDF file you want to convert. The path of the file you want to save. 0 for stream order ,1 for appearance order. A string used as the password for PDF file. If no password needed, empty or NULL can be used. FPDFText_PDFToText(const char * sour_file,const char * dest_file, int flag,FPDF_BYTESTRING password);

FPDFText_PageToText
Convert a PDF page data to a text buffer. Prototype: int Parameters: doc Handle to document. Returned by FPDF_LoadDocument function. page_index - Index number of the page. 0 for the first page. buf An output buffer used to hold the text of the page. size Size of the buffer. flag 0 for stream order ,1 for appearance order. Return value: If buf is NULL or size is zero, number of characters (not bytes) needed, otherwise, number of characters copied into the buf. FPDFText_PageToText(FPDF_DOCUMENT doc, int page_index,wchar_t* buf,int size,int flag);

4. FPDFEDIT Operation (Edit Module)

a) Document Operation FPDF_CreateNewDocument
Create a new PDF document. Prototype: FPDF_DOCUMENT FPDF_CreateNewDocument; Parameters:

53

Programming Guide

None. Return value: A handle to a document. If failed, NULL is returned.

FPDF_SaveAsFile
Save the specified document with a new name or format. Prototype: FPDF_BOOL FPDF_SaveAsFile(FPDF_DOCUMENT document, char* file_name, FPDF_DWORD permissions, FPDF_BYTE const* UserPwd, long nUserPwdLen, FPDF_BYTE const* OwnerPwd, long nOwnerPwdLen); Parameters: Document Handle to document. Returned by FPDF_LoadDocument or FPDF_CreateNewDocument. file_name Path to the PDF file (including extension). permissions The PDF document permissions. UserPwd A 32-byte string, the user password to entered. Could be NULL. nUserPwdLen The length of the UserPwd. OwnerPwd A 32-byte string, the owner password to entered. Could be NULL. nOwnerPwdLen The length of the OwnerPwd. Return value: TRUE for succeed, FALSE for Failed.

b) Page Operation FPDFPage_New

Construct an empty page. Prototype FPDF_PAGE FPDFPage_New(FPDF_DOCUMENT document, int page_index, double width, double height); Parameters: document Handle to document. Returned by FPDF_LoadDocument or FPDF_CreateNewDocument. page_index The index of a page. width The page width. height The page height. Return value: The handle to a page. Comments: Loaded page can be deleted by FPDFPage_Delete.

54

Programming Guide

FPDFPage_Delete
Delete a PDF page. Prototype: Void FPDFPage_Delete(FPDF_DOCUMENT document, int page_index); Parameters: document Handle to document. Returned by FPDF_LoadDocument or FPDF_CreateNewDocument. page_index The index of a page. Return value: None.

FPDFPage_GetRectangle
Get page rectangle, in points (1 point equals 1/72 inch). Prototype: FPDF_BOOL FPDFPage_GetRectangle(FPDF_PAGE page, int iRect, double* left, double* right, double* bottom, double* top); Parameters: page Handle to a page. Returned by FPDFPage_New. iRect The index values for getting boxes defined following. FPDF_RECT_PAGE 0 FPDF_RECT_BOUNDING 1 FPDF_RECT_MEDIABOX 2 FPDF_RECT_CROPBOX 3 FPDF_RECT_TRIMBOX 4 FPDF_RECT_ARTBOX 5 FPDF_RECT_BLEEDBOX 6 left Pointer to a double value receiving the left of a rectangle (in points). right Pointer to a double value receiving the right of a rectangle (in points). bottom Pointer to a double value receiving the bottom of a rectangle (in points). top Pointer to a double value receiving the top of a rectangle (in points). Return value: TRUE if successful, FALSE otherwise.

FPDFPage_SetRectangle
Set page rectangle, in points (1 point equals 1/72 inch) Prototype: FPDF_BOOL FPDFPage_SetRectangle(FPDF_PAGE page, int iRect,

55

Programming Guide

double left, double right, double bottom, double top); Parameters: page iRect Handle to a page. Returned by FPDFPage_New. The index values for getting boxes defined following. FPDF_RECT_PAGE 0 FPDF_RECT_BOUNDING 1 FPDF_RECT_MEDIABOX 2 FPDF_RECT_CROPBOX 3 FPDF_RECT_TRIMBOX 4 FPDF_RECT_ARTBOX 5 FPDF_RECT_BLEEDBOX 6 The left coordinate of a rectangle (in points). The right coordinate of a rectangle (in points). The bottom coordinate of a rectangle (in points). The top coordinate of a rectangle (in points).

left right bottom top Return value: TRUE if successful, FALSE otherwise. Comment: When its done, the content in this page will be changed. You must call the FPDF_LoadPage to reload the page.

FPDFPage_GetRotation
Get the page rotation. One of following values will be returned0(0), 1(90), 2(180), 3(270). Prototype: Int FPDFPage_GetRotation(FPDF_PAGE page); Parameters: page Handle to a page. Returned by FPDFPage_New. Return value: The PDF page rotation. Comment: The PDF page rotates clockwise.

FPDFPage_SetRotation
Set page rotation. One of following values will be set: 0(0), 1(90), 2(180), 3(270). Prototype: Void FPDFPage_SetRotation(FPDF_PAGE page, int rotate); Parameters: page Handle to a page. Returned by FPDFPage_New. rotate The value of the PDF page rotation Return value:

56

Programming Guide

None. Comment: The PDF page rotates clockwise. When its done, the content in this pagewill be changed. You must call the FPDF_LoadPage to reload the page.

FPDFPage_InsertObject
Insert an object to the page. The page object is automatically freed. Prototype: void FPDFPage_InsertObject(FPDF_PAGE page, FPDF_PAGEOBJECT page_obj); Parameters: page Handle to a page. Returned by FPDFPage_New. page_obj Handle to a page object. Returned by FPDFPageObj_NewTextObj FPDFPageObj_NewTextObjEx; FPDFPageObj_NewPathObj Return value: None.

FPDFPage_DeleteObject
Delete an object from the page. The page object is automatically freed. Prototype: Void FPDFPage_DeleteObject(FPDF_PAGE page, int index); Parameters: page Handle to a page. Returned by FPDFPage_New. index The index of a page object. Return value: None.

FPDFPage_CountObject
Get number of page objects inside the page Prototype: int FPDFPage_CountObject(FPDF_PAGE page); Parameters: Page Handle to a page. Returned by FPDFPage_New. Return value: The number of the page object.

FPDFPage_GetObject
Get page object by index. Prototype: FPDF_PAGEOBJECT FPDFPage_GetObject(FPDF_PAGE page, int index);

57

Programming Guide

Parameters: page Handle to a page. Returned by FPDFPage_New. index The index of a page object. Return value: The handle of the page object. Null for failed.

FPDFPage_GetPageObjectIndex
Get the index of the page object in the specify page. Prototype: int FPDFPage_GetPageObjectIndex(FPDF_PAGE page, FPDF_PAGEOBJECT page_obj); Parameters: page Handle to a page. Returned by FPDFPage_New. page_obj Handle to a page object. Returned by FPDFPageObj_NewTextObj, FPDFPageObj_NewTextObjEx,FPDFPageObj_NewPathObj, etc. Return value: If successful, returns the index of the page object. Otherwise, returns -1.

FPDFPage_GenerateContent
Generate PDF Page content. Prototype: FPDF_BOOL FPDFPage_GenerateContent (FPDF_PAGE page); Parameters: page Handle to a page. Returned by FPDFPage_New. Return value: True if successful, false otherwise. Comment: Before you save the page to a file, or reload the page, you must call the FPDFPage_GenerateContent function. Or the changed information will be lost.

c) Page Objects Operation FPDFPageObj_Transform

Transform (scale, rotate, shear, move) page object. Prototype: void FPDFPageObj_Transform(FPDF_PAGEOBJECT page_object, double a, double b, double c, double d, double e, double f); Parameters: page_object Handle to a page object. Returned by FPDFPageObj_NewTextObj,

58

Programming Guide

a b c d e f Return value: None.

FPDFPageObj_NewTextObjEx,FPDFPageObj_NewPathObj, etc. The coefficient "a" of the matrix. The coefficient "b" of the matrix. The coefficient "c" of the matrix. The coefficient "d" of the matrix. The coefficient "e" of the matrix. The coefficient "f" of the matrix.

FPDFPageObj_Clone
Create a new page object based on this page object. Prototype: FPDF_PAGEOBJECT FPDFPageObj_Clone(FPDF_PAGEOBJECT page_object); Parameters: page_object Handle to a page object. Returned by FPDFPageObj_NewTextObj, FPDFPageObj_NewTextObjEx,FPDFPageObj_NewPathObj, etc. Return value: Handle to a page object.

FPDFPageObj_Free
Free a page object. Prototype: Void FPDFPageObj_Free(FPDF_PAGEOBJECT page_object); Parameters: page_object Handle to a page object. Returned by FPDFPageObj_NewTextObj, FPDFPageObj_NewTextObjEx,FPDFPageObj_NewPathObj,etc. Return value: None.

FPDFPageObj_GetType
Get page object type. Prototype: int FPDFPageObj_GetType(FPDF_PAGEOBJECT page_object); Parameters: page_object Handle to a page object. Returned by FPDFPageObj_NewTextObj, FPDFPageObj_NewTextObjEx,FPDFPageObj_NewPathObj, etc. Return value:

59

Programming Guide

Returns one of the FPDF_PAGEOBJ_xxxx constants defined following. FPDF_PAGEOBJ_TEXT 1 FPDF_PAGEOBJ_PATH 2 FPDF_PAGEOBJ_IMAGE 3 FPDF_PAGEOBJ_SHADING 4 FPDF_PAGEOBJ_FORM 5

FPDFPageObj_GetBBox
Get page object bounding box. Prototype: void FPDFPageObj_GetBBox(FPDF_PAGEOBJECT page_object, double* left, double* bottom, double* right, double* top ); Parameters: page_object Handle to a page object. Returned by FPDFPageObj_NewTextObj, FPDFPageObj_NewTextObjEx,FPDFPageObj_NewPathObj, etc. left Pointer to a double value receiving the left of a rectangle (in points). bottom Pointer to a double value receiving the bottom of a rectangle (in points). right Pointer to a double value receiving the right of a rectangle (in points). top Pointer to a double value receiving the top of a rectangle (in points). Return value: None.

FPDFPageObj_GetClipCount
Get the clip number of a page_objcet. Prototype: int FPDFPageObj_GetClipCount(FPDF_PAGEOBJECT page_object); Parameters: page_object Handle to a page object. Returned by FPDFPageObj_NewTextObj, FPDFPageObj_NewTextObjEx,FPDFPageObj_NewPathObj,etc. Return value: The clip count.

FPDFPageObj_GetClip
Get the clip path of a page object. Prototype: FPDF_PATH FPDFPageObj_GetClip(FPDF_PAGEOBJECT page_object, int index); Parameters: page_object Handle to a page object. Returned by FPDFPageObj_NewTextObj, FPDFPageObj_NewTextObjEx,FPDFPageObj_NewPathObj, etc.

60

Programming Guide

index The index of a path. Return value: The handle of a path.

FPDFPageObj_AddClip
Add a clip to a page object. Prototype: FPDF_BOOL FPDFPageObj_AddClip(FPDF_PAGEOBJECT page_object, FPDF_PATH path, int type); Parameters: page_object Handle to a page object. Returned by FPDFPageObj_NewTextObj, FPDFPageObj_NewTextObjEx, FPDFPageObj_NewPathObj, etc. path Handle to a path. Returned by FPDFPathObj_GetPath. type The fill mode types defined following. FPDF_FILL_NULL 0 FPDF_FILL_ALTERNATE 1 FPDF_FILL_WINDING 2 Return value: True if successful, false otherwise.

FPDFPageObj_AppendPathToClip
Append a path to the current clip. Prototype: FPDF_BOOL FPDFPageObj_AppendPathToClip(FPDF_PAGEOBJECT page_object, FPDF_PATH path, int type); Parameters: page_object Handle to a page object. Returned by FPDFPageObj_NewTextObj, FPDFPageObj_NewTextObjEx,FPDFPageObj_NewPathObj, etc. path Handle to a path. Returned by FPDFPathObj_GetPath. type The fill mode types defined following. FPDF_FILL_NULL 0 FPDF_FILL_ALTERNATE 1 FPDF_FILL_WINDING 2 Return value: True if successful, false otherwise.

FPDFPageObj_RemoveClip
Remove a clip from the page object. Prototype:

61

Programming Guide

void FPDFPageObj_RemoveClip(FPDF_PAGEOBJECT page_object, int index); Parameters: page_object Handle to a page object. Returned by FPDFPageObj_NewTextObj, FPDFPageObj_NewTextObjEx, FPDFPageObj_NewPathObj, FPDFPageObj_NewImageObj etc. index The index of the clip. Return value: None.

FPDFPageObj_GetFillColor
Get the fill color of a page object. Prototype: FPDF_DWORD FPDFPageObj_GetFillColor(FPDF_PAGEOBJECT page_object); Parameters: page_object Handle of page object, could be text_object, path_object and uncolored images. Return value: The fill color of a page object. Constructed by 0xaarrggbb.

FPDFPageObj_SetFillColor
Set the fill color of a page object. Prototype: void FPDFPageObj_SetFillColor(FPDF_PAGEOBJECT page_object, FPDF_DWORD argb); Parameters: page_object Handle of page object, could be text_object, path_object and uncolored images. argb The fill color of a page object. Constructed by 0xaarrggbb. Return value: None.

FPDFPageObj_GetStrokeColor
Get the stroke color of a page object. Prototype: FPDF_DWORD FPDFPageObj_GetStrokeColor (FPDF_PAGEOBJECT page_object); Parameters: page_object Handle of page object, could be text_object, path_object and uncolored images. Return value: The stroke color of a page object. Constructed by 0xaarrggbb.

62

Programming Guide

FPDFPageObj_SetStrokeColor
Set the stroke color of a page object. Prototype: void FPDFPageObj_SetStrokeColor (FPDF_PAGEOBJECT page_object, FPDF_DWORD argb); Parameters: page_object Handle of page object, could be text_object, path_object and uncolored images. argb The stroke color of a page object. Constructed by 0xaarrggbb. Return value: None.

FPDFPageObj_GetLineWidth
Get the line width of a path_object. Prototype: double FPDFPageObj_GetLineWidth (FPDF_PAGEOBJECT page_object); Parameters: page_object Handle of page object. It could be path_object or stroke text_object. Return Value: Return the line width of the page object.

FPDFPageObj_SetLineWidth
Set the line width of a path_object. Prototype: void FPDFPageObj_SetLineWidth (FPDF_PAGEOBJECT page_object, double width); Parameters: page_object Handle of page object. It could be path_object or stroke text_object. width The line width of the page object. Return Value: None.

FPDFPageObj_GetLineCapStyle
Get the line cap style of a page object. Prototype: int FPDFPageObj_GetLineCapStyle (FPDF_PAGEOBJECT page_object); Parameters: page_object Handle of page object. It could be path_object or stroke text_object. Return Value: The line cap styles defined following. FPDF_LINECAP_BUTT 0

63

Programming Guide

FPDF_LINECAP_ROUND FPDF_LINECAP_PROJECT

1 2

FPDFPageObj_SetLineCapStyle
Set the line cap style of a page_object. Prototype: void FPDFPageObj_SetLineCapStyle (FPDF_PAGEOBJECT page_object, int style); Parameters: page_object Handle of page object. It could be path_object or stroke text_object. style The line cap styles defined following. FPDF_LINECAP_BUTT 0 FPDF_LINECAP_ROUND 1 FPDF_LINECAP_PROJECT 2 Return Value: None.

FPDFPageObj_GetLineJoinStyle
Get the line join style of a page_object. Prototype: int FPDFPageObj_GetLineJoinStyle(FPDF_PAGEOBJECT page_object); Parameters: page_object Handle of page object. It could be path_object or stroke text_object. Return Value: Return the line join styles defined following. FPDF_LINEJOIN_MITER 0 FPDF_LINEJOIN_ROUND 1 FPDF_LINEJOIN_BEVEL 2

FPDFPageObj_SetLineJoinStyle
Set the line join style of a page object. Prototype: void FPDFPageObj_SetLineJoinStyle(FPDF_PAGEOBJECT page_object, int style); Parameters: page_object Handle of page object. It could be path_object or stroke text_object. Style The line join styles defined following. FPDF_LINEJOIN_MITER 0 FPDF_LINEJOIN_ROUND 1 FPDF_LINEJOIN_BEVEL 2 Return Value:

64

Programming Guide

None.

FPDFPageObj_GetMiterLimit
Get the meter limit of a page object. Prototype: FPDFFont_GetFlags double FPDFPageObj_GetMiterLimit(FPDF_PAGEOBJECT page_object); Parameters: page_object Handle of page object. It could be path_object or stroke text_object. Return Value: The meter limit of a page object. Comments: The miter limit imposes a maximum on the ratio of the miter length to the line width. When the limit is exceeded, the join will be converted from a miter to a bevel.

FPDFPageObj_SetMiterLimit
Set the meter limit of a page_object. Prototype: void FPDFPageObj_SetMiterLimit(FPDF_PAGEOBJECT page_object, double miter_limit); Parameters: page_object Handle of page object. It could be path_object or stroke text_object. miter_limit The meter limit of a page_object. Return Value: None. Comments: The miter limit imposes a maximum on the ratio of the miter length to the line width. When the limit is exceeded, the join is converted from a miter to a bevel.

FPDFPageObj_GetDashCount
Get dash count of a page object. Prototype: int FPDFPageObj_GetDashCount(FPDF_PAGEOBJECT page_object) Parameters: page_object Handle of page object. It could be path_object or stroke text_object. Return Value: The dash count of a page object.

FPDFPageObj_SetDashCount
Set dash count of a page object.

65

Programming Guide

Prototype: Void FPDFPageObj_SetDashCount(FPDF_PAGEOBJECT page_object, int count); Parameters: page_object Handle of page object. It could be path_object or stroke text_object. count The dash count of a page object. Return Value: None. Comments: Setting the count will release the old dash array of the page object and allocate a new dash array.

FPDFPageObj_GetDashArray
Get dash array elements of a page object. Prototype: Double FPDFPageObj_GetDashArray(FPDF_PAGEOBJECT page_object, int index); Parameters: page_object Handle of page object. It could be path_object or stroke text_object. index The index of a dash array element. Return Value: Return the dash value of specific index of the dash array. Comments: The dash array's elements are numbers that specify the lengths of alternating dashes and gaps, the numbers must be nonnegative and not all zero.

FPDFPageObj_SetDashArray
Set dash array elements of a page object. Prototype: Void FPDFPageObj_SetDashArray(FPDF_PAGEOBJECT page_object, int index, double dash_value); Parameters: page_object Handle of page object. It could be path_object or stroke text_object. index The index of a dash array element. dash_value The dash value of specific index of the dash array. Return Value: None. Comments: The dash array's elements are numbers that specify the lengths of alternating dashes and gaps, the numbers must be nonnegative and not all zero.

66

Programming Guide

FPDFPageObj_GetDashPhase
Get dash phase of a page object. Prototype: double FPDFPageObj_GetDashPhase(FPDF_PAGEOBJECT page_object); Parameters: page_object Handle of page object. It could be path_object or stroke text_object. Return Value: The dash phase value of a page object. Comments: The dash phase specifies the distance into the dash pattern at where you can start the dash.

FPDFPageObj_SetDashPhase
Set dash phase of a page object. Prototype: void FPDFPageObj_SetDashPhase(FPDF_PAGEOBJECT page_object, double phase_value); Parameters: page_object Handle of path object. It could be path_object or stroke text_object. phase_value The dash phase value. Return Value: None. Comments: The dash phase specifies the distance into the dash pattern where you can start the dash.

d) Text Operation FPDFPageObj_NewTextObj

Create a new Text Object. Prototype: FPDF_PAGEOBJECT FPDFPageObj_NewTextObj(void); Parameters: None. Return Value: Handle of text object.

FPDFPageObj_NewTextObjEx
Create a new Text Object. Prototype: FPDF_PAGEOBJECT FPDFPageObj_NewTextObjEx(unsigned short* text, int nwSize, FPDF_FONT font);

67

Programming Guide

Parameters: text nwSize font -

Pointer to a string. The text you want to add in a text object. The length of the string. Handle of FPDF_FONT. It could be FPDFTextObj_GetFont, FPDFFont_AddTrueType and FPDFFont_AddStandardFont.

Return Value: Handle of text object.

FPDFTextObj_GetFont
Get the font handle of a text object. Prototype: FPDF_FONT FPDFTextObj_GetFont(FPDF_PAGEOBJECT text_object); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. Return Value: Handle of the font.

FPDFTextObj_SetFont
Set the font into a text object. Prototype: Void FPDFTextObj_SetFont(FPDF_PAGEOBJECT text_object, FPDF_FONT font, double font_size); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. font Handle of FPDF_FONT. It could be returned by FPDFTextObj_GetFont, FPDFFont_AddTrueType and FPDFFont_AddStandardFont. font_size The size of the font. Return Value: None.

FPDFTextObj_GetFontSize
Get the font size of a text object. Prototype: double FPDFTextObj_GetFontSize(FPDF_PAGEOBJECT text_object); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx.

68

Programming Guide

Return Value: The value of the font size.

FPDFTextObj_GetMatrix
Get the text object matrix. Prototype: void FPDFTextObj_GetMatrix(FPDF_PAGEOBJECT text_object, double* a, double* b, double* c, double* d, double* e, double* f); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. a Pointer to a double value receiving the coefficient "a" of the matrix. b Pointer to a double value receiving the coefficient "b" of the matrix. c Pointer to a double value receiving the coefficient "c" of the matrix. d Pointer to a double value receiving the coefficient "d" of the matrix. e Pointer to a double value receiving the coefficient "e" of the matrix. f Pointer to a double value receiving the coefficient "f" of the matrix. Return Value: None.

FPDFTextObj_SetMatrix
Set the text object matrix. Prototype: Void FPDFTextObj_SetMatrix(FPDF_PAGEOBJECT text_object, double a, double b, double c, double d, double e, double f); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. a The coefficient "a" of the matrix. b The coefficient "b" of the matrix. c The coefficient "c" of the matrix. d The coefficient "d" of the matrix. e The coefficient "e" of the matrix. f The coefficient "f" of the matrix. Return Value: None.

FPDFTextObj_CountChars
Get the number of characters from a text object.

69

Programming Guide

Prototype: int FPDFTextObj_CountChars(FPDF_PAGEOBJECT text_object); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. Return Value: A character count in the text object.

FPDFTextObj_GetUincode
Get the unicode of a special character in a text object. Prototype: int FPDFTextObj_GetUincode(FPDF_PAGEOBJECT text_object, int index); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. index The index of the character to get the unicode. Return Value: The unicode value.

FPDFTextObj_SetUnicode
Set the unicode of a special character in a text object. Protype:: FPDF_BOOL Parameters: text_object FPDFTextObj_SetUnicode(FPDF_PAGEOBJECT text_object, int index, int nUnicode); Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. The index of the character to set unicode. The unicode value.

index nUnicode Return Value: TRUE for successful, FALSE otherwise.

FPDFTextObj_GetOffset
Calculate the physical offset from the start to the specified special character. Prototype: double FPDFTextObj_GetOffset(FPDF_PAGEOBJECT text_object, int index); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx.

70

Programming Guide

index The index of the character to calculate the offset to. Return Value: Return the offset value.

FPDFTextObj_GetTextMode
Get the text rendering mode. Prototype: int FPDFTextObj_GetTextMode(FPDF_PAGEOBJECT text_object); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. Return Value: Return one of the enumeration values defined in text-rendering modes.

FPDFTextObj_SetTextMode
Set the text rendering mode. Prototype: FPDF_BOOL FPDFTextObj_SetTextMode(FPDF_PAGEOBJECT text_object, int text_mode); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. text_mode One of the enumeration values defined in text rendering modes. Return Value: TRUE for successful, FALSE otherwise.

FPDFTextObj_GetCharSpace
Get the character-spacing value of a text object. Prototype: double FPDFTextObj_GetCharSpace(FPDF_PAGEOBJECT text_object); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. Return Value: The character-spacing value Comment: The character-spacing value is a number specified in unscaled text space units.

FPDFTextObj_SetCharSpace
Set the character-spacing value of a text object.

71

Programming Guide

Prototype: FPDF_BOOL Parameters: text_object

FPDFTextObj_SetCharSpace(FPDF_PAGEOBJECT text_object, double charspace); Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. The character-spacing value.

charspace Return Value: TRUE for successful, FALSE otherwise. Comment: The character-spacing value is a number specified in unscaled text space units.

FPDFTextObj_GetWordSpace
Get the word-spacing value of a text object. Prototype: double FPDFTextObj_GetWordSpace(FPDF_PAGEOBJECT text_object); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. Return Value: The word-spacing value. Comment: The word-spacing value is a number expressed in unscaled text space units.

FPDFTextObj_SetWordSpace
Set the word-spacing value of a text object. Prototype: FPDF_BOOL FPDFTextObj_SetWordSpace(FPDF_PAGEOBJECT text_object, double wordspace); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. wordspace The word-spacing value. Return Value: TRUE if successful, FALSE otherwise.

FPDFTextObj_Insert
Inserts a substring at the given index within the text object. Prototype:

72

Programming Guide

int

FPDFTextObj_Insert(FPDF_PAGEOBJECT text_object, unsigned short* text, int nwSize, int index); Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. A pointer to the substring to be inserted. The length of the substring. The index of the character before which the insertion will take place.

Parameters: text_object

text nwSize index Return Value: Return the length of the changed string. Comment: The index can be 0 and the number of characters in a text object (returned by FPDFTextObj_CountChars).

FPDFTextObj_Delete
Delete a character or characters in the text object. Prototype: int FPDFTextObj_Delete(FPDF_PAGEOBJECT text_object, int index, int nCount = 1); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. index The index of the first character to delete. nCount The number of characters to be removed. Return Value: Return the characters number of the changed text object. Comment: Call this member function to delete a character or characters from a string starting with the character at index. If nCount is longer than the string, the remainder of the string will be removed.

FPDFTextObj_Find
Find a substring inside a text object. Prototype: int FPDFTextObj_Find(FPDF_PAGEOBJECT text_object, unsigned short* text, int nwSize, int nStart = 0); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. text A pointer to a string to search for. nwSize The length of the string. nStart The index of the character in the string to begin the search with,

73

Programming Guide

or 0 to start from the beginning. Return Value: Return the zero-based index of the first character in this text object that matches the requested substring or characters; -1 if the substring or character is not found.

FPDFTextObj_Replace
Replace a character with another. Prototype: int FPDFTextObj_Replace(FPDF_PAGEOBJECT text_object, unsigned short* OldText, int nwOldSize, unsigned short* NewText, int nwNewSize); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx. OldText A pointer to a string containing the character to be replaced by NewText. nwOldSize The length of the old text. NewText A pointer to a string containing the character replacing OldText. nwNewSize The length of the new text. Return Value: Return the number characters of the changed text object. -1 if the text object isn't changed.

FPDFTextObj_Compare
Compare current text object characters with another string. Prototype: FPDF_BOOL FPDFTextObj_Compare(FPDF_PAGEOBJECT text_object, unsigned short* text, int nwSize); Parameters: text_object Handle of text object returned by FPDFPageObj_NewTextObj or FPDFPageObj_NewTextObjEx text The string used for comparison. nwSize The length of the string. Return Value: TRUE if the texts are identical, and FALSE if they are different.

e) Fonts Operation FPDFFont_GetFontName

Retrieve the face name of the font and return the name in a string. Prototype: FPDF_BYTESTRING FPDFFont_GetFontName(FPDF_FONT font); Parameters:

74

Programming Guide

font Handle of the font object. Return Value: Pointer to the string.

FPDFFont_GetFlags
Get the value of the flags entry in a font descriptor. Prototype: int FPDFFont_GetFlags(FPDF_FONT font); Parameters: font Handle of the font object. Return Value: The value of the Flags entry defined following. // All glyphs have the same width. FPDF_FLAG_FIXEDPITCH 1 // Glyphs have serifs, which are short strokes drawn at an angle at the top and bottom of // glyph stems. FPDF_FLAG_SERIF 2 // Font contains glyphs outside the Adobe standard Latin character set. This flag and the // Nonsymbolic flag cannot both be set or both be clear. FPDF_FLAG_SYMBOLIC 4 // Glyphs resemble cursive handwriting. FPDF_FLAG_SCRIPT 8 // Font uses the Adobe standard Latin character set or a subset of it. FPDF_FLAG_NONSYMBOLIC 32 // Glyphs have dominant vertical strokes that are slanted. FPDF_FLAG_ITALIC 64 // Font contains no lowercase letters; typically used for display purposes, such as for titles // or headlines. FPDF_FLAG_ALLCAP 0x10000 // Font contains both uppercase and lowercase letters. FPDF_FLAG_SMALLCAP 0x20000 // Whether bold glyphs are painted with extra pixels even at very small text sizes. FPDF_FLAG_FORCEBOLD 0x40000 Comment: The value of the Flags entry in a font descriptor is an unsigned 32-bit integer containing flags specifying various characteristics of the font.

FPDFFont_GetBBox
Get the font bounding box. Prototype:

75

Programming Guide

Void Parameters: font left right bottom top Return Value: None.

FPDFFont_GetBBox(FPDF_FONT font, double* left, double* right, double* bottom, double* top); Handle of the font object. Pointer to a double value receiving the left of a rectangle (in points). Pointer to a double value receiving the right of a rectangle (in points). Pointer to a double value receiving the bottom of a rectangle (in points). Pointer to a double value receiving the top of a rectangle (in points).

FPDFFont_GetCharBBox
Get the special character bounding box of a font object. Prototype: Void FPDFFont_GetCharBBox(FPDF_FONT font, FPDF_DWORD char_code, double* left, double* right, double* bottom, double* top); Parameters: font Handle of the font object. char_code The character code. left Pointer to a double value receiving the left of a rectangle (in points). right Pointer to a double value receiving the right of a rectangle (in points). bottom Pointer to a double value receiving the bottom of a rectangle (in points). top Pointer to a double value receiving the top of a rectangle (in points). Return Value: None.

FPDFFont_GetCharWidth
Get a special character width of a font object. Prototype: int FPDFFont_GetCharWidth(FPDF_FONT font, FPDF_DWORD char_code); Parameters: font Handle of the font object. char_code The character code. Return Value: The value of the width.

FPDFFont_GetUnicode
Get the unicode value from a character code. Prototype:

76

Programming Guide

unsigned short FPDFFont_GetUnicode(FPDF_FONT font, FPDF_DWORD char_code); Parameters: font Handle of the font object. char_code The character code. Return Value: The unicode value.

FPDFFont_GetCharSize
Get the character size in the font. Prototype: int FPDFFont_GetCharSize(FPDF_FONT font, FPDF_DWORD char_code); Parameters: font Handle of the font object. char_code The character code. Return Value: The value of the character size.

FPDFFont_GetCharCode
Get the character code from a unicode value. Prototype: FPDF_DWORD FPDFFont_GetCharCode(FPDF_FONT font, unsigned short unicode); Parameters: font Handle of the font object. unicode The unicode of a special character. Return Value: The character code value.

FPDFFont_GetFontDescent
Get the descent value in the font. Prototype: int FPDFFont_GetFontDescent (FPDF_FONT font); Parameters: font Handle of the font object. Return Value: The descent value. Comment: The descent value describes the maximum depth below the baseline reached by glyphs in this font. The value is a negative number.

77

Programming Guide

FPDFFont_GetFontAscent
Get the ascent value in the font. Prototype: int FPDFFont_GetFontAscent(FPDF_FONT font); Parameters: font Handle of the font object. Return Value: The ascent value. Comment: The ascent value describes the maximum height above the baseline reached by glyphs in this font, excluding the height of glyphs for accented characters.

FPDFFont_AddTrueType
Create a true type font and add the font into the document. Prototype: FPDF_FONT FPDFFont_AddTrueType(FPDF_DOCUMENT document, PFPDFLOGFONT pLogFont); Parameters: document Handle to document. Returned by FPDF_LoadDocument and FPDF_CreateNewDocument. pLogFont The tagFPDFLOGFONT structure defined following. typedef struct tagFPDFLOGFONT { long lfWeight; // Specifies the height, in logical units, of the character cell or character of the font. unsigned char lfItalic; // Specifies the average width, in logical units, of characters in the font. unsigned char lfCharSet; // Specifies the character set. unsigned char lfPitchAndFamily; // Specifies the pitch and family of the font. char lfFaceName[32]; // A null-terminated string that specifies the typeface name of the font. } FPDFLOGFONT, *PFPDFLOGFONT; Return Value: Handle of the new font object.

FPDFFont_AddStandardFont
Create a standard type font and add the font into the document. Prototype:

78

Programming Guide

FPDF_FONT Parameters: document font_name encoding

FPDFFont_AddStandardFont(FPDF_DOCUMENT document, char* font_name, int encoding); Handle to document. Returned by FPDF_LoadDocument and FPDF_CreateNewDocument. A null-terminated string that specifies the typeface name of the font. The font encoding defined following. // Built-in encoding. FPDF_ENCODING_DEFAULT 0 // WinAnsiEncoding. FPDF_ENCODING_WINANSI 1 // MacRomanEncoding. FPDF_ENCODING_MACROMAN 2 // MacExpertEncoding. FPDF_ENCODING_STANDARD 3 // StandardEncoding. Adobe standard encoding. FPDF_ENCODING_MACEXPERT 4 // Not support yet. Reserved. FPDF_ENCODING_IDENTITY 10 // Not support yet. Reserved. FPDF_ENCODING_GB 11 // Not support yet. Reserved. FPDF_ENCODING_BIG5 12 // Not support yet. Reserved. FPDF_ENCODING_SHIFT_JIS 13 // Not support yet. Reserved. FPDF_ENCODING_KOREAN 14

Return Value: Handle of the new font object.

f)

Path Operation

FPDFPageObj_NewPathObj
Create a new path Object. Prototype: FPDF_PAGEOBJECT FPDFPageObj_NewPathObj(void); Parameters: None. Return Value: Handle of path object.

79

Programming Guide

FPDFPathObj_SetPoints
Set the points in a path object. Prototype: void FPDFPathObj_SetPoints(FPDF_PAGEOBJECT path_object, int point_count, double* point_x, double* point_y, char* flags); Parameters: path_object Handle of path object returned by FPDFPageObj_NewPathObj. point_count The total number of points point_x The pointer to point at an array of X coordinate of points point_y The pointer to point at an array of Y coordinate of points. flags The pointer to point at an array of the path point types defined following. FPDF_PATH_CLOSEFIGURE 1 FPDF_PATH_LINETO 2 FPDF_PATH_BEZIERTO 4 FPDF_PATH_MOVETO 6 Return Value: None.

FPDFPathObj_InsertPoint
Insert a point to a path object. Prototype: void FPDFPathObj_InsertPoint(FPDF_PAGEOBJECT path_object, double x, double y, int flag, int point_index = -1); Parameters: path_object Handle of path object returned by FPDFPageObj_NewPathObj. x The X coordinate of a point. y The Y coordinate of a point. flag The path point types defined following. FPDF_PATH_CLOSEFIGURE 1 FPDF_PATH_LINETO 2 FPDF_PATH_BEZIERTO 4 FPDF_PATH_MOVETO 6 point_index The index of the point. Return Value: None.

FPDFPathObj_RemovePoint
Remove a point in a path object. Prototype:

80

Programming Guide

void FPDFPathObj_RemovePoint(FPDF_PAGEOBJECT path_object, int point_index); Parameters: path_object Handle of path object returned by FPDFPageObj_NewPathObj. point_index The index of the point Return Value: None.

FPDFPathObj_ClearPoints
Clear the points in a path object. Prototype: void FPDFPathObj_ClearPoints(FPDF_PAGEOBJECT path_object); Parameters: path_object Handle of path object returned by FPDFPageObj_NewPathObj. Return Value: None.

FPDFPathObj_CountPoints
Get the number of points in a path object. Prototype: int FPDFPathObj_CountPoints(FPDF_PAGEOBJECT path_object); Parameters: path_object Handle of path object returned by FPDFPageObj_NewPathObj. Return Value: The point count in a path object.

FPDFPathObj_GetPointType
Get the type of a special point. Prototype: int FPDFPathObj_GetPointType(FPDF_PAGEOBJECT path_object, int point_index); Parameters: path_object Handle of path object returned by FPDFPageObj_NewPathObj. point_index The index of the point. Return Value: The path point types defined following. FPDF_PATH_CLOSEFIGURE 1 FPDF_PATH_LINETO 2 FPDF_PATH_BEZIERTO 4 FPDF_PATH_MOVETO 6

81

Programming Guide

FPDFPathObj_GetPointX
Get the X coordinate of a specific point. Prototype: double FPDFPathObj_GetPointX(FPDF_PAGEOBJECT path_object, int point_index); Parameters: path_object Handle of path object returned by FPDFPageObj_NewPathObj. point_index The index of the inserted point Return Value: The value of the X coordinate of the point.

FPDFPathObj_GetPointY
Get the Y coordinate of a special point. Prototype: double FPDFPathObj_GetPointY(FPDF_PAGEOBJECT path_object, int point_index); Parameters: path_object Handle of path object returned by FPDFPageObj_NewPathObj. point_index The index of the point Return Value: The value of the Y coordinate of the point.

FPDFPathObj_GetPath
Get the path in a path object. Prototype: FPDF_PATH FPDFPathObj_GetPath(FPDF_PAGEOBJECT path_object); Parameters: path_object Handle of path object returned by FPDFPageObj_NewPathObj. Return Value: The path in the path object.

FPDFPathObj_GetStroke
Get the stroke mode of the path. Prototype: FPDF_BOOL FPDFPathObj_GetStroke(FPDF_PAGEOBJECT path_object); Parameters: path_object Handle of path object returned by FPDFPageObj_NewPathObj. Return Value: Return the stroke mode. TRUE for stroking the line, FALSE for no stroking.

82

Programming Guide

FPDFPathObj_GetFillMode
Get the fill method of the path. Prototype: int FPDFPathObj_GetFillMode(FPDF_PAGEOBJECT path_object); Parameters: path_object Handle of path object returned by FPDFPageObj_NewPathObj. Return Value: Returns fill mode types defined following. FPDF_FILL_NULL 0 FPDF_FILL_ALTERNATE 1 FPDF_FILL_WINDING 2

FPDFPathObj_SetFillStroke
Set the fill and stroke mode of the path. Prototype: void FPDFPathObj_SetFillStroke(FPDF_PAGEOBJECT path_object, int fill_type, int stroke); Parameters: path_object Handle of path object returned by FPDFPageObj_NewImgeObj. fill_type The fill mode enumeration defined following. FPDF_FILL_NULL 0 FPDF_FILL_ALTERNATE 1 FPDF_FILL_WINDING 2 stroke The stroke mode. TRUE for stroking the line, FALSE for no stroking. Return Value: None.

FPDFPathObj_GetMatrix
Get the matrix of the path. Prototype: FPDF_BOOL Parameters: path_object a b c d e f Handle of path object returned by FPDFPageObj_NewPathObj. Pointer to a double value receiving the coefficient "a" of the matrix. Pointer to a double value receiving the coefficient "b" of the matrix. Pointer to a double value receiving the coefficient "c" of the matrix. Pointer to a double value receiving the coefficient "d" of the matrix. Pointer to a double value receiving the coefficient "e" of the matrix. Pointer to a double value receiving the coefficient "f" of the matrix. FPDFPathObj_GetMatrix(FPDF_PAGEOBJECT path_object, double* a, double* b, double* c, double* d,double* e, double* f);

83

Programming Guide

Return Value: TRUE for successful, FALSE for failed.

FPDFPathObj_SetMatrix
Set the matrix of the path. Prototype: FPDF_BOOL Parameters: image_object a b c d e f Return value: TRUE for successful, FALSE for failed. Handle of path object returned by FPDFPageObj_NewPathObj. The coefficient "a" of the matrix. The coefficient "b" of the matrix. The coefficient "c" of the matrix. The coefficient "d" of the matrix. The coefficient "e" of the matrix. The coefficient "f" of the matrix. FPDFPathObj_SetMatrix(FPDF_PAGEOBJECT path_object, double a, double b, double c, double d, double e, double f);

g) Forms Operation FPDFFormObj_InsertSubObject

Insert a page object to the form object. The page object is automatically freed. Prototype: Void FPDFFormObj_InsertSubObject(FPDF_PAGEOBJECT form_object, FPDF_PAGEOBJECT page_obj); Parameters: form_object Handle to a form object. Returned by FPDFPage_GetObject. page_obj Handle to a page object. Returned by FPDFPageObj_NewTextObj, FPDFPageObj_NewTextObjEx, FPDFPageObj_NewPathObj, FPDFPageObj_ImageObj, etc. Return value: None.

FPDFFormObj_Display
Render contents in a form_object to a device (screen, bitmap, or printer). Prototype: void FPDFFormObj_Display(FPDF_PAGEOBJECT form_object,void* device, int xPos,int yPos,int xSize, int ySize,int iRotate); Parameters:

84

Programming Guide

device form_object xPos yPos xSize ySize iRotate Return value: None.

Handle to device context. Handle to the form_object. Returned by FPDFPage_GetObject function. Left pixel position of the display area in the device coordinate. Top pixel position of the display area in the device coordinate. Horizontal size (in pixels) for displaying the page. Vertical size (in pixels) for displaying the page. Page orientation: 0 (normal), 1 (rotated 90 degrees clockwise), 2 (rotated 180 degrees), 3 (rotated 90 degrees counter-clockwise).

FPDFFormObj_DeleteSubObject
Delete a page object from the form object. The page object is automatically freed. Prototype : Void FPDFFormObj_DeleteSubObject(FPDF_PAGEOBJECT form_object, int index); Parameters: form_object Handle to a form object. Returned by FPDFPage_GetObject. index The index of a page object. Return value: None.

FPDFFormObj_CountSubObjects
Get number of page objects inside the form object. Prototype: int FPDFFormObj_CountSubObjects(FPDF_PAGEOBJECT form_object); Parameters: form_object Handle to a form object. Returned by FPDFPage_GetObject. Return value: The number of the page objects.

FPDFFormObj_GetSubObject
Get the page object from a form object. Prototype: FPDF_PAGEOBJECT FPDFFormObj_GetSubObject(FPDF_PAGEOBJECT form_object, int index); Parameters: form_object Handle to a form object. Returned by FPDFPage_GetObject. index The index of a page object. Return value: The handle of the page object. Null for failed.

85

Programming Guide

FPDFFormObj_GetSubObjectIndex
Get the index of the page object from the specified form object. Prototype: int FPDFFormObj_GetSubObjectIndex(FPDF_PAGEOBJECT form_object, FPDF_PAGEOBJECT page_obj); Parameters: form_object Handle to a form object. Returned by FPDFPage_GetObject. page_obj Handle to a page object. Returned by FPDFPageObj_NewTextObj, FPDFPageObj_NewTextObjEx,FPDFPageObj_NewPathObj, etc. Return value: If successful, returns the index of the page object. If failed, it return -1.

FPDFFormObj_GenerateContent
Generate content of the form object. Prototype: FPDF_BOOL DFFormObj_GenerateContent(FPDF_PAGEOBJECT form_object) Parameters: form_object Handle to a form object. Returned by FPDFPage_GetObject. Return value: True for successful, and false for failed. Comment: When the form object's information is changed, you must call the FPDFFormObj_GenerateContent function. Or the changed information will be lost.

FPDFFormObj_GetMatrix
Get the form object matrix. Prototype: FPDF_BOOL FPDFFormObj_GetMatrix(FPDF_PAGEOBJECT form_object, double* a, double* b, double* c, double* d,double* e, double* f) Parameters: form_object Handle to a form object. Returned by FPDFPage_GetObject. a Pointer to a double value receiving the coefficient "a" of the matrix. b Pointer to a double value receiving the coefficient "b" of the matrix. c Pointer to a double value receiving the coefficient "c" of the matrix. d Pointer to a double value receiving the coefficient "d" of the matrix. e Pointer to a double value receiving the coefficient "e" of the matrix. f Pointer to a double value receiving the coefficient "f" of the matrix. Return Value:

86

Programming Guide

TRUE for successful, FALSE for failed.

h) Images Operation FPDFPageObj_NewImgeObj

Create a new Image Object. Prototype: FPDF_PAGEOBJECT FPDFPageObj_NewImgeObj(FPDF_DOCUMENT document); Parameters: document Handle to document. Returned by FPDF_LoadDocument or FPDF_CreateNewDocument . Return Value: Handle of image object.

FPDFImageObj_LoadFromFile
Load Image from a image file(such as *.bmp,*.jpeg) and then set it to an image object. Prototype: FPDF_BOOL FPDFImageObj_LoadFromFile(FPDF_PAGE* pages, int nCount, FPDF_PAGEOBJECT image_object, FPDF_BYTESTRING filename); Parameters: pages Pointers to the start of all loaded pages. nCount Number of pages. image_object Handle of image object returned by FPDFPageObj_NewImgeObj. filename The full path of the image file. Return Value: TRUE if successful, FALSE otherwise.

FPDFImageObj_GetMatrix
Get the matrix of an image object. Prototype: FPDF_BOOL FPDFImageObj_GetMatrix(FPDF_PAGEOBJECT image_object, double* a, double* b, double* c, double* d,double* e, double* f); Parameters: image_object Handle of image object returned by FPDFPageObj_NewImgeObj. a Pointer to a double value receiving the coefficient "a" of the matrix. b Pointer to a double value receiving the coefficient "b" of the matrix c Pointer to a double value receiving the coefficient "c" of the matrix d Pointer to a double value receiving the coefficient "d" of the matrix e Pointer to a double value receiving the coefficient "e" of the matrix

87

Programming Guide

f Pointer to a double value receiving the coefficient "f" of the matrix Return value: TRUE if successful, FALSE otherwise. Comments: A matrix defines transformation of coordinate from one space to another. In PDF, a matrix is defined by the following equations: x' = a * x + c * y + e; y' = b * x + d * y + f; FPDFImageObj_GetMatrix function is used to get a,b,c,d,e,f coefficients of the transformation from "image space" to "user space".

FPDFImageObj_SetMatrix
Set the matrix of an image object. Prototype: FPDF_BOOL FPDFImageObj_SetMatrix(FPDF_PAGEOBJECT image_object, double a, double b, double c, double d, double e, double f); Parameters: image_object Handle of image object returned by FPDFPageObj_NewImgeObj. a The coefficient "a" of the matrix. b The coefficient "b" of the matrix. c The coefficient "c" of the matrix. d The coefficient "d" of the matrix. e The coefficient "e" of the matrix. f The coefficient "f" of the matrix. Return value: TRUE if successful, FALSE otherwise.

FPDFImageObj_GetBitmap
Get the bitmap from an image object. Prototype: FPDF_BITMAP FPDFImageObj_GetBitmap(FPDF_PAGEOBJECT image_object) Parameters: image_object Handle of image object returned by FPDFPageObj_NewImgeObj. Return value: The handle of the bitmap.

FPDFImageObj_SetBitmap
Set the bitmap to an image object. Prototype:

88

Programming Guide

FPDF_BOOL

FPDFImageObj_SetBitmap(FPDF_PAGE* pages,int nCount, FPDF_PAGEOBJECT image_object, FPDF_BITMAP bitmap);

Parameters: pages Pointer's to the start of all loaded pages. nCount Number of pages. image_object Handle of image object returned by FPDFPageObj_NewImgeObj. bitmap The handle of the bitmap which you want to set it to the image object. Return value: TRUE if successful, FALSE otherwise.

89

Programming Guide

Redistribution
NOTE: You can only redistribute files listed below to customers of your application, under a written SDK license agreement with Foxit. You cannot distribute any part of the SDK to general public, even with a SDK license agreement. Without SDK license agreement, you cannot redistribute anything. For better performance and rendering quality, some Windows system DLL may also be redistributed with FOXIT PDF SDK, redistribution of such Windows DLLs is subject to redistribution license agreement with Microsoft. You can visit Microsoft website for more information. Operating System Windows XP or later Windows 98/Me/2000 Windows 95/NT Linux Foxit DLL FPDFSDK.DLL FPDFSDK.DLL FPDFSDK.DLL libfpdfsdk.so None GDIPLUS.DLL IE 4.0 or later required None System DLL

To get Windows DLLs, please visit Microsoft website or get it from a system running other OS. If you have any questions, please feel free to contact us at [email protected].

90