Brochure Gas Turbine SGT-300 For Power Generation

SGT-300 Industrial Gas Turbine
Power Generation: (ISO) 7.90MW(e) The SGT-300 has a rugged industrial design which enables high efficiency (nominal 31 %) and excellent emissions performance. These characteristics provide the flexibility to meet the needs of a broad spectrum of power generation applications.
The Siemens SGT-300 single-shaft industrial gas turbine is a proven unit for all electrical power generation and cogeneration applications. It offers high efficiency and reliability on a wide range of gaseous and liquid fuels. For industrial cogeneration, the high steam-raising capability of more than 18 tonnes per hour contributes towards achieving overall plant efficiencies of 80 % or higher. In addition, the compact arrangement, on-site maintainability and inherent reliability of the SGT-300 have made it an ideal gas turbine for the demanding oil and gas industry. Incorporating proven gas turbine technology, the SGT-300 offers costeffective power for a wide range of duties including:
Industrial Power Generation Simple-cycle and combined-cycle power plants for base load, standby power and peak lopping Cogeneration for industrial plants with high heat load and district heating schemes Power Generation in the Oil and Gas Industry Offshore: on oil platforms and FPSO (Floating Production, Storage and Offloading) vessels Onshore: for oil field service, refinery application, emergency and standby power generation Highly efficient cogeneration solutions for oil and gas applications
Industrial Gas Turbines
Answers for energy.
SGT-300 Industrial Gas Turbine
SGT-300 core engine test facility.
Technical specifications
Overview Single-shaft, industrial gas turbine Power generation: 7.90 MW(e) (ISO zero loss) Frequency: 50 or 60 Hz Electrical efficiency: 31 % Heat rate: 11,773 kJ/kWh (11,158 Btu/kWh) Compressor pressure ratio: 14:1 Exhaust gas flow: 30.2 kg/s (66.6 lb/s) Exhaust temperature: 542 C (1008 F) Typical emissions: NO x <15 ppmV and CO: <10 ppmV (corrected to 15 % O2 dry) Medium-calorific value fuels capability (>32 MJ/Nm3 Wobbe index) Axial compressor 10-stage Variable inlet guide vanes Air flow: (ISO) 29.9 kg/s Nominal speed: 14,010 rpm Combustion 6 reverse-flow cannular combustion chambers Lean-burn Dry Low Emissions (DLE) or conventional diffusion flame system High-energy ignitor system Turbine 2-stage overhung turbine - First stage air-cooled Bearings Tilt-pad radial and thrust Vibration- and temperaturemonitoring as standard Main reduction gearbox Speeds of 1500 rpm and 1800 rpm Generator Voltages: 6 to 13.8 kV Frequency: 50 or 60 Hz Package Fabricated steel underbase - Integral oil tank - Multi-point mounting - Optional 3-point mounting Modular fluid systems Lubricating oil system - Gearbox-driven main pump - AC motor-driven auxiliary pump - DC motor-driven emergency pump Oil cooler and oil heater Electrically-driven hydraulic start system Hydrocarbon drains tank on package Control system - Siemens SIMATIC PLC-based with distributed control and processing capability installed on package - Optional Allen-Bradley system - Optional off-package systems Vibration monitoring system - BN 1701: Standard - BN 3500: Optional Fire and gas detection equipment Fire suppression equipment On- and off-line compressor cleaning options availble Combustion-air inlet-filtration options: - Simple static - Pulse cleaning - HEPA Enclosure - Painted carbon steel or stainless steel - Noise level options (85 dB(A) standard)
Gas turbine
Key features High simple-cycle and cogeneration efficiencies, cutting fuel costs Dual-fuel Dry Low Emissions (DLE) combustion system, meeting stringent legislation Maintenance Site maintainability or optional rapid core exchange as required by customer Designed for maintenance: - Horizontally split compressor casing - Horizontally and vertically split inlet casing - Combustion chambers, flame tubes and ignitors easily accessible for inspection - Large side-doors on enclosure for equipment change-out - Package designed for gas turbine removal on either side Multiple boroscope-inspection ports
Customer Support
Global support network of Authorized Service Centers Emergency service 24/7 specialist helpdesk Full field service Full diagnostic support, remote monitoring OEM modernizations and upgrades In-house or on-site training programs Range of maintenance and service contracts available
SGT-300 package.
Two SGT-300 gas turbines provide Norbord with electricity and heat at their board manufacturing plant in Scotland, UK.
Package
Key features Short installation time Compact package size, high power-to-weight ratio Factory testing: - Core engine - Functional testing of modules as standard - Pre-commissioning of package - Optional core customer-witness test - Optional complete package test Minimized customer interfaces - On-package drains tank - On-package unit control panel - Roof-mounted oil cooler and air ducting
Cogeneration with the SGT-300

In cogeneration configuration, with its excellent efficiency and steam-raising capability, the SGT-300 provides the core of a reliable, efficient and powerful SSC-300 plant. When compared with conventional energy supplies, an SSC-300 cogeneration plant will provide electrical power, heating and/or cooling with benefits of: Significant reductions in energy costs Security of energy supplies Reductions in total emissions of carbon dioxide, and improved flexibility
3 2
Height to top of package: 10.82 m
4 8
6 5
Wid th: 2
.85
Gas tu
acka bine p
g ge len
th: 11
.75 m
SGT-300 standard package 1 Combustion air inlet 2 Enclosure air outlet 3 Lube oil cooler 4 Enclosure air inlet 5 Unit control panel 6 AC generator 7 Core engine 8 Combustion exhaust 9 Fire extinguishant
Height: 3.50 m
SGT-300 Performance
Nominal generator output and heat rate Conditions/assumptions:
9 28
8 Generator terminal power output, MW
32
26 30
24 28
22
Ex haus t m
ass flow (k
g/ s)
55 0 26
Altitude: Sea level Ambient pressure: 101.3 kPa Inlet ducting loss: 1.0 kPa* Exhaust ducting loss (assumes waste-heat recovery): 2.0 kPa* Natural gas fuel. Gearbox efficiency: 99.0 % Generator efficiency: 97.0 % Relative humidity: 60 % * Duct losses are site-specific according to application. Please contact your local Siemens representative or our Customer Support Center for performance quotations.
20
5
18
Heat input (MW)
24
22
16
3
E xh
aus
t tem
20
p er a
14
2 - 20
ture
( C )
425
- 10 0 10
45 0
20
475
30
52 5 50 0
40
50
Engine inlet temperature, C
Unfired heat-recovery steam generation Conditions/assumptions:

21,000 20,000
Exhaust gas mass flow: Assumed feed water temperature: Exhaust gas temperature:
29.8 kg/s 100 C 542 C
19,000 Dry Saturated 250 C 17,000

Exhaust mass flow
Steam flow, kg/h
18,000
16,000
300 C
15,000
350 C
St e a m te mp e r atur
14,000
e ( C
400 C 450 C
13,000 0 10 20 Pressure, bar g 30 40
Published by and copyright 2009: Siemens AG Energy Sector Freyeslebenstrasse 1 91058 Erlangen, Germany Siemens AG Energy Sector Oil & Gas Division Wolfgang-Reuter-Platz 47053 Duisburg, Germany
Siemens Energy, Inc. 10730 Telge Road Houston, Texas 77095, USA Siemens Industrial Turbomachinery Ltd P.O. Box 1, Waterside South Lincoln LN5 7FD, United Kingdom
For more information, please contact our Customer Support Center. Tel: +49 180 524 70 00 Fax: +49 180 524 24 71 (Charges depending on provider) E-mail: [email protected] Oil & Gas Division Order No. E50001-W430-A106-X-4A00 Printed in Germany Dispo 34806, c4bs 7447, P WS 12092.5
Printed on elementary chlorine-free bleached paper. All rights reserved. Trademarks mentioned in this document are the property of Siemens AG, its affiliates, or their respective owners. Subject to change without prior notice. The information in this document contains general descriptions of the technical options available, which may not apply in all cases. The required technical options should therefore be specified in the contract.
www.siemens.com / energy

Brochure Gas Turbine SGT-300 For Power Generation

Uploaded by

Copyright:

Available Formats

Brochure Gas Turbine SGT-300 For Power Generation

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Brochure Gas Turbine SGT-300 For Power Generation

Uploaded by

Copyright:

Available Formats

SGT-300 Industrial Gas Turbine

Industrial Gas Turbines

Answers for energy.

SGT-300 Industrial Gas Turbine

SGT-300 core engine test facility.

Cogeneration with the SGT-300

Height to top of package: 10.82 m

8 Generator terminal power output, MW

Heat input (MW)

Engine inlet temperature, C

Unfired heat-recovery steam generation Conditions/assumptions:

29.8 kg/s 100 C 542 C

19,000 Dry Saturated 250 C 17,000

Steam flow, kg/h

13,000 0 10 20 Pressure, bar g 30 40

You might also like