HazMaxPinnacle Al

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

Haz

APPLICATIONS

Hazardous locations Watertight requirements Dusttight requirements Oil and gas exploration and production Waste water treatment plants Pipeline compressor / pumping & storage

Maintenance & lubrication pits Petrochemical facilities High abuse areas

HazMax Pinnacle/al

APPROVALS

Class I Division 2 Groups A, B, C & D Class I Zone 2 Groups IIA, IIB & IIC Class II Division 2 Groups F & G Class III

Type 4 Conforms to IP66

STANDARDS

UL 844 - Hazardous Locations UL 1598 - Luminaires CSA - Class 3428 03 CSA - Class 3428 83

TECHNICAL SPECIFICATIONS
HOUSING

Extruded aluminum with cast end caps.


LENS

0.125 inch thick clear acrylic, optional polycarbonate.


REFLECTOR

F EATU R E S

Aluminum parabolic with an electrostatically applied powder coat finish. Minimum 90% reflectance.
GASKET

Fluorescent system provides energy savings up to 50% when compared to HID. Multi voltage electronic ballast resistant to brownouts or voltage and frequency fluctuations. Field replaceable lens and gasket. Acrylic lens withstands constant exposure to sunlight and contact with petroleum based products. Neoprene gasket resists petroleum. Permanent safety cable mounting points at each end. Fixture may be mounted horizontally or vertically and rotated up to 270. Tool less entry via heavy duty twist draw latches. Lens frame hinged on side for easy lamp replacement. Spring loaded lamp holders, for linear lamps resist shock and vibration. Optional self contained emergency battery backup ballasts. Optional certified test switch on emergency models. Optional long life T5 lamps available upon request (consult factory).

One piece neoprene.


MOUNTING

Optional mounting kits available. Please see MOUNTING OPTIONS.


LATCHES

Plated steel twist draw.


LAMP HOLDER

Double spring loaded on linear models.


ENTRIES
1

2 NPT feed-through outlets, 34 NPT outlets optional.

LAMP TYPES

See Ordering References. Lamps not provided.


BALLAST

120 to 277 volt 50/60 Hz electronic, optional 347v and 480v.


EMERGENCY BATTERY BACKUP BALLAST

Optional, self contained 90 minute minimum for all lamp types. 120 minutes minimum for F32T8 one lamp. Starting temperature 32F/0C.

156

OR D E R ING R E F E R E NCES

DP
1. Series DP 3. Number of Lamps 2 - 2 lamps 3 - 3 lamps, Lamp Types 5 & 6 4 - 4 lamps, Lamp Type 2 only

4
2. Length (nominal) 2 - 2 foot 4 - 4 foot

**

6. Entries 1 - 12 Feed-through NPT Hubs 2 - 34 Feed-through NPT Hubs

4. 5.

Lamp Types 1 - 17/32 - 2 ft F17 or 4 ft F32 - T8 Bi-Pin 2 - 40 - 2 ft FT40 - CF 2G11 5 - 24/54 - 2 ft F24 or 4 ft F54 - T5HO Mini Bi-Pin 6 - 14/28 - 2 ft F14 or 4 ft F28 - T5 Mini Bi-Pin 7 - 44 - 4 ft F48 - T8HO RDC 8 - 35/60 - 2 ft F24 or 4 ft F48 - T12HO RDC Voltage / Frequency 7 - 120 to 277 Volt 50/60 Hz 6 - 347v 60 Hz, consult factory for availability 9 - 480v 60 Hz, consult factory for availability

7.

Special Options EM1 - Emergency Battery Backup Ballast, 1 lamp, 277v max EMT - Emergency Battery Backup Ballast, 1 lamp, 277v max, test switch L* - Lamps LL* - Long Life Lamps (F54T5H0 only) P - Polycarbonate Lens * Lamps are not included unless option L or LL is specified.

Notes: 1. Consult factory for options not listed.

TEMPERAT U R E C O D E S & A P P R O VA L S

17 32 40 24/54 14/28 44 35/60

T8 Bi-Pin G13 T8 Bi-Pin G13 4 Pin 2G11 T5HO Mini Bi-Pin G5 T5 Mini Bi-Pin G5 T8HO RDC R17d T12HO RDC R17d

F17-T8 F32-T8 FT40-CF F24/F54-T5HO F14/F28-T5 F48-T8HO F24/F48-T12HO

T5 T5 T5 T5 T5 T4A T4A

A,B,C & D A,B,C & D A,B,C & D A,B,C & D A,B,C & D A,B,C & D A,B,C & D

F&G F&G F&G N/A F&G F&G F&G

Yes Yes Yes No Yes Yes Yes

T3C T3C T3C N/A T3C T3C T3C

0F / -18C -20F / -29C 0F / -18C -20F / -29C 0F / -18C -20F / -29C -20F / -29C

55C 55C 55C 40C 40C 40C 40C

90C 90C 90C 90C 90C 90C 90C

*Consult factory for optional higher ambient models.

P A U L U H N

H A Z M A X

P I N N A C L E / A L

Aluminum - Hazardous Area Lighting


157

Lamp Wattage

Ballast/Socket Type

ANSI Lamp Code

Class I T-Code

Class I Division 2

Class II Division 2

Class III

Class II & III T-Code

Starting Temp

Maximum Ambient*

Supply Wire

HazMax Pinnacle/al
S PA R E PART S
Part No. Description

FX5350 FX5350 FX5307 FX5305 FX5174 FX5221 FX5349 FX5334 FX5334 FX5272 FX5350 FX5350 FX5307 FX5305 FX5340 FX5340 FX5349 FX5334 FX5334 FX5272 FX5128HDU FX5346HDU FX3573 FX3574

BALLAST 120-277V AC 50/60HZ, 1 x 14, F14T5 BALLAST 120-277V AC 50/60HZ, 1 x 28, F28T5 BALLAST 120-277V AC 50/60HZ, 1 x 24, F24T5HO BALLAST 120-277V AC 50/60HZ, 1 x 54, F54T5HO BALLAST 120-277V AC 50/60HZ, 1 x 17, F17T8 BALLAST 120-277V AC 50/60HZ, 1 x 32, F32T8 BALLAST 120-277V AC 50/60HZ, 1 x 44, F48T8HO BALLAST 120-277V AC 50/60HZ, 1 x 35, F24T12HO BALLAST 120-277V AC 50/60HZ, 1 x 60, F48T12HO BALLAST 120-277V AC 50/60HZ, 1 X 40 CF, FT40 2G11 BALLAST 120-277V AC 50/60HZ, 2 x 14, F14T5 BALLAST 120-277V AC 50/60HZ, 2 x 28, F28T5 BALLAST 120-277V AC 50/60HZ, 2 x 24, F24T5HO BALLAST 120-277V AC 50/60HZ, 2 X 54, F54T5HO BALLAST 120-277V AC 50/60HZ, 2 x 17, F17T8 BALLAST 120-277V AC 50/60HZ, 2 x 32, F32T8 BALLAST 120-277V AC 50/60HZ, 2 x 44, F48T8HO BALLAST 120-277V AC 50/60HZ, 2 x 35, F24T12HO BALLAST 120-277V AC 50/60HZ, 2 x 60, F48T12HO BALLAST 120-277V AC 50/60HZ, 2 x 40, FT40 2G11 EMERGENCY BATTERY BACKUP BALLAST, EM1/EMT1, 120v277v, CF, T8, T8HO & T12HO EMERGENCY BATTERY BACKUP BALLAST, EM1/EMT1, 120v277v, T5 & T5HO LAMP, 14w, F14T5 LAMP, 28w, F28T5

FX3568 FX3567 FX3577 FX3528 FX3527 FX3565 FX3507 FX3505 FX3533 103-2000 103-2001 103-2100 103-2200 103-2300 035-1060 103-4000 103-4001 103-4100 103-4200 103-4300 758-0523 752-6051 754-7102 754-0005

LAMP, 24w, F24T5HO LAMP, 54w, F54T5HO LAMP, 54w, Long Life F54T5HO LAMP, 17w, F17T8 LAMP, 32w, F32T8 LAMP, 44w, F48T8HO LAMP, 35w, F24T12HO LAMP, 60w, F48T12HO LAMP, 40w CF, FT40 2G11 LENS & FRAME ASSEMBLY, 2 ft. models DOOR FRAME ONLY, 2 ft. models LENS ONLY, (acrylic), for 2 ft. models LENS GASKET, 2 ft. models Reflector, 2 ft. models Latch assembly Lens & frame assembly, 4 ft. models Door frame only, 4 ft. models Lens only (acrylic), 4 ft. models Lens gasket, 4 ft. models Reflector, 4 ft. models Lamp holder, HO T8 & T12 Lamp holder, 2G11, 4 Pin Lamp holder, T12 & T8, Bi-Pin Lamp holder, T5 HO, fixed & spring set

158

D I ME N S I O N S

Nominal Length

Dimensions in Inches / Centimeters A B C D E

Carton L x W x D inches

Nominal Weight Lbs Kg

2 Foot 4 Foot

26.0 / 66.0 50.0 / 127.0

27.6 / 70.2 51.6 / 131.1

4.4 / 11.1 4.4 / 11.1

6.3 / 16.0 6.3 / 16.0

6.5 / 16.5 6.5 / 16.5

834 X 614 X 3178 10 X 8 X 56

23.0 32.0

10.4 14.55

MO U N T I N G O P T I O N S
DP1050MTK* Back mount swivel kit. 2 aluminum brackets with slide mount.

DP1052MTK Offset wall or ceiling mounting kit. 2 cast aluminum brackets.

P A U L U H N

H A Z M A X

P I N N A C L E / A L

Aluminum - Hazardous Area Lighting


159

*Add suffix PS for plated steel swivel brackets.

HazMax Pinnacle/al
MO U N T I N G O P T I O N S

DP1053MTK Ceiling or wall mounting kit. 2 Cast aluminum brackets.

DP1057MTK Fixed Back Mount plate

160

M O U N TIN G O P TIO N S
FX7028 Beam Clamp Kit Includes Beam clamps (2), Safety Cable & Cable Gland.

BC2K 2 Beam Clamp Kit. For use with Surface mount kit.

SC30H 48 Safety Cable with snap hook.

CX1502 Cable Gland 34 Aluminum, Cord Grip Range .438 - .562.

DP-STKT Includes FX7028 and DP1053MTK.

DP-OFKT Includes FX7028 and DP1052MTK.

P A U L U H N

H A Z M A X

P I N N A C L E / A L

Aluminum - Hazardous Area Lighting


161

You might also like