CASE 590 Super M PRELIMENARY
CASE 590 Super M PRELIMENARY
CASE 590 Super M PRELIMENARY
ENGINE
Model Type Cylinders Bore/Stroke Displacement Fuel injection Fuel Primary fuel filter Case Family IV 445TA/E3 diesel, Tier III certified 4-stroke, turbocharged 4 4.09 in x 5.19 in (104 x 132 mm) 274 in3 (4.5 L) Direct high pressure common rail Diesel 5 micron
PRELIMINARY
TIRES
Front 2WD 14.5/75 x 16.1, 10-ply 4WD 14 x 17.5, 10-ply Rear 2/4WD 21L x 24, 10-ply Power plugs
ELECTRICAL
Voltage Alternator Battery Optional batteries 12 volts, negative ground 90 amp 850 cold-cranking amps (2) 850 cold-cranking amps (2) 30 amps ea.
POWERTRAIN
Transmission 4-speed synchromesh with hydraulically actuated clutches and electric F/R shuttle control, clutch disconnect buttons on the transmission shifter and loader control lever Gear ratios 1st 2nd 3rd 4th Torque converter Ratio 2.64 On-the-go push-button activation 2.130 6.0 12.78 2.5 6.4 16.0 Differential lock Front 4WD axle Differential ratio Planetary hub ratio Total reduction ratio Rear axle Differential ratio Planetary hub ratio Total reduction ratio Forward 5.603 3.481 1.584 0.793 Reverse 4.643 2.884 1.313 0.657
HYDRAULICS
Pump Gear-type tandem, transmission driven coupled directly to engine Main relief pressure 3050 + 50 - 50 psi @ 42.5 gpm (210 + 3 - 3 bar @ 161 L/min) Filtration 7-micron, full flow replaceable cartridge on return line, condition indicator light for filter Oil cooler Loader flow @ rated engine rpm 31.5 gpm @ 3050 psi (119 L/min @ 210 bar) Loader control valve Monoblock single lever control for lift, tilt and auxiliary hydraulics, positive hold float and return-to-dig Loader auxiliary hydraulics with proportional thumb switch w/detent on loader control handle 0 to 31.5 gpm (0 to 119 L/min) Backhoe flow @ rated engine rpm 42.5 gpm @ 3050 psi (161 L/min @ 210 bar) Manual Backhoe Controls Backhoe Control Valve Monoblock open-center, parallel circuits. Boom and dipper, with pilot operated checks Backhoe auxiliary hydraulics 3rd 13.4 (21.6) 16.1 (25.9) 4th 24.6 (39.5) 29.5 (47.4) Uni-directional flow, adjustable variable flow from 0 to 36 gpm (136 L/min) Control operation Manual Foot switch activated Bi-Directional flow, variable flow from 0 to 42.5 gpm (161 L/min) @ rated engine rpm Control operation Manual Hand lever Heavy-duty
Secondary fuel filter 30 micron w/water trap and indicating lamp Air intake Cooling Engine speeds* (rpm) Rated speed, full load Low idle High idle, no load Horsepower Gross Net Cross-flow Liquid 2200 900 - 1000 2330 - 2430
110 (82 kW) @ 2200 rpm 108 (81 kW) @ 2200 rpm
Maximum torque @ 1400 rpm Gross 381 lbft (516 Nm) Net 372 lbft (505 Nm) Torque rise at rated speed 45%
NOTE: *Engine speeds with standard transmission. Meets federal emission regulations.
ENGINE COOLING
Radiator Core type Core size area Rows of tubes Fan Style Diameter Ratio Water pump Style Square wave 487 in2 (.315 m2) 5 Viscous 9 blade suction 19.2 in (488 mm) 1.4:1 Integral
Service brakes Individually applied, power assisted, hydraulically actuated, maintenance-free, self-adjusting, outboard mounted, wet disc, 2 per side Disc area Parking brakes Spring applied hydraulic release (SAHR) Travel speeds mph (km/h) 1st Forward 3.9 (6.3) Reverse 4.7 (7.5) 2nd 6.2 (10.0) 7.4 (12.0) 384 in2 (.25 m2)
Engine oil Pump Deep sump plate cooler with pressurized under-piston nozzles Pump operating angle ratings Side-to-side Rated 35 Fore and aft Rated 35 Oil filtration Replaceable, full-flow cartridge
Page 1 of 6
OPERATOR ENVIRONMENT
ROPS/FOPS canopy Key start Hydrostatic steering Vinyl air suspension seat w/180 swivel Seat turn around idle Electronic hand and foot throttles Ergonomic loader control lever w/push-button activation of differential lock and transmission de-clutch Backhoe foot-swing w/3 lever control (2) Accessory power plugs (30 amp) Anti-vandalism covers (canopy only) Cup holder Coat hook w/tether strap (cab only) Interior rearview mirror 2 in (51 mm) retractable seat belt Storage compartment w/lid Left side storage tray
TURNING DIAMETER
2WD Brakes on Brakes off 4WD engaged Brakes on Brakes off 4WD disengaged Brakes on Brakes off 25 ft 04 in (7.63 m) 25 ft 11 in (7.90 m) 26 ft 5 in (8.04 m) 29 ft 10 in (9.08 m) 24 ft 8 in (7.51 m) 25 ft 6 in (7.78 m)
LOADER
Single-lever control for lift and tilt Positive hold float Return-to-dig Automatic self-leveling In-line, reverse linkage Dual parallel dump cylinders Clutch disconnect button on loader control and shift levers Bucket position indicator Loader Bucket Sizes Width Weight Struck Heaped General Purpose Bucket (w/ lift points and bolt-on cutting edge) Weight 1,123 lb (509 kg) 1,324 lb (601 kg) Struck 1.1 yd
3
OPERATING WEIGHTS
Lightest Configuration Unit equipped with 2WD, ROPS canopy, vinyl air suspension seat, 93 in (2.36 m) general purpose loader bucket, 24 in (610 mm) Universal backhoe bucket, standard dipperstick, 21L x 24 rear tires, 14.5/75 x 16.1 front tires, single battery, flip over stabilizer pads, no operator 15,268 lb (6926 kg) Heavy Configuration
4 IN 1 Bucket 93 in (2.36 m) 1,628 lb (738 kg) 1.0 yd3 (0.76 m3) 1.2 yd3 (0.92 m3)
INSTRUMENTATION
Vehicle Control Module w/menu driven options and onboard diagnostics Cruise control Foot throttle sensitivity Cold weather idle settings Maintenance settings Gauges Engine water temperature Converter oil temperature Fuel Tachometer/hourmeter Voltmeter Warning lights Air cleaner restriction Alternator A/C high pressure Cold start Engine oil pressure Hydraulic oil filter bypass Parking brake Low fuel Audible alarms w/diagnostics Coolant temperature Engine oil pressure Parking brake engagement Shuttle engagement/seat position Backup alarm Transmission temperature Water in fuel filter Battery voltage Low fuel Air filter restriction Hydraulic filter restriction A/C not functioning Horn - dual switched front & rear
Unit equipped with 4WD, cab, cloth air suspension seat, 93 in (2.36 m) 4 IN 1 loader bucket, 24 in (610 mm) Universal backhoe bucket, Extendahoe dipperstick, dual batteries, flip stabilizer pads, no operator 19,578 lb (8881 kg) Add-on weights Cab (over canopy) Counterweights Extendahoe
BACKHOE
Over-center design Cast, ductile iron boom, and swing tower Open-center hydraulics - Pro Control System 17, 940 lbft (24 370 Nm) swing torque Case attachment coupler Foot-swing w/3 lever control Wing stabilizers w/flip over dirt pad Backhoe Bucket Sizes
+454 lb (206 kg) +440 lb (200 kg) +900 lb (408 kg) +270 lb (122 kg) +393 lb (178 kg)
SERVICE CAPACITIES
Fuel tank Hydraulic system Total Total w/Extendahoe Reservoir w/filter Reservoir w/o filter Transmission 2WD Total system 4WD Total system 4WD Front axle Differential Planetaries (each) 42.0 gal (159 L) 32.2 gal (122 L) 33.7 gal (127.6 L) 12.5 gal (47.1 L) 12.0 gal (45.2 L) 18 qt (17 L) 20.5 qt (19.4 L) 7.1 qt (6.7 L) .63 qt (.6 L)
Width 12 in (305 mm) 16 in (406 mm) 18 in (457 mm) 24 in (610 mm) 30 in (762 mm) 36 in (914 mm) 24 in (610 mm) 30 in (762 mm)
Weight Universal Buckets 290 lb (132 kg) 346 lb (157 kg) 350 lb (159 kg) 413 lb (187 kg) 475 lb (215 kg) 535 lb (243 kg) High Capacity Buckets 450 lb (204 kg) 517 lb (235 kg)
Heaped 3.40 ft3 (0.10 m3) 3.60 ft3 (0.10 m3) 5.30 ft3 (0.15 m3) 7.70 ft3 (0.22 m3) 10.20 ft3 (0.29 m3) 12.70 ft3 (0.36 m3) 8.50 ft3 (0.24 m3) 10.60 ft3 (0.30 m3)
Rear axle Differential and planetaries 19.7 qt (18.6 L) Engine oil w/filter Cooling system w/heater w/o heater Window washer reservoir 14.4 qt (13.6 L) 19.0 qt (18.0 L) 18.3 qt (17.3 L) 3.5 qt (3.3 L)
A N H E B
C G
O M
LOADER DIMENSIONS
General Purpose Bucket* A. B. C. D. E. Overall operating height fully raised Height to Bucket hinge pin fully raised Bucket hinge pin @ SAE carry Dump angle @ full height Dump clearance @ full height, 45 dump Bucket Clam open F. Dump reach @ full height, 45 dump Bucket Clam open Bucket rollback G. H. J. K. @ groundline @ SAE carry @ full height Digging depth below grade Bucket flat Clam open (dozing) L. Reach from front axle centerline bucket on ground Lift capacity to full height Breakout force Lift cylinders Dump cylinders Bucket cutting edge width Maximum grading angle Maximum clam opening Moldboard height Raising time to full height Bucket dumping time Lowering time Power down Return-to-dig Clam Open time Close time
NOTE: Loader dimensions taken with 4WD.
4 IN 1 Bucket 14 ft 6 in (4.43 m) 11 ft 5 in (3.47 m) 14.9 in (379 mm) 45 9 ft 2 in (2.78 m) 9 ft 10 in (3.0 m) 25.9 in (659 mm) 11.5 in (293 mm) 40 45 Adjustable 4.3 in (109 mm) 1.7 in (42 mm) 75.2 in (1.91 m) 7,437 lb (3373 kg) 10,294 lbf (45 790 N) 12,004 lbf (53 396 N) 93 in (2.36 m) 116 38.3 in (972 mm) 36.8 in (934 mm) 4.7 sec 1.2 sec 2.8 sec 3.1 sec 2.3 sec
14 ft 2 in (4.32 m) 11 ft 5 in (3.47 m) 13.7 in (349 mm) 45 9 ft 0 in (2.75 m) NA 27.5 in (699 mm) NA 40 45 Adjustable 3.8 in (96 mm) NA 77.6 in (1.97 m) 7,327 lb (3323 kg) 10,729 lbf (47 725 N) 10,980 lbf (48 841 N) 93 in (2.36 m) 116 NA NA 4.7 sec 1.2 sec 2.8 sec 3.1 sec NA NA
2.3 sec
DIMENSIONS
Standard Backhoe Retracted M. Overall transport length General purpose bucket 4 IN 1 bucket Overall transport width Height To top of canopy To top of cab To top of exhaust stack Transport Ground clearance at backhoe frame Angle of departure Front wheel tread 2WD 4WD Rear wheel tread O. Wheelbase 2WD 4WD 84 in (2.13 m) 84.5 in (2.15 m) 84 in (2.13 m) 84.5 in (2.15 m) NA NA 72.6 in (1.84 m) 73.4 in (1.86 m) 69.9 in (1.78 m) 72.6 in (1.84 m) 73.4 in (1.86 m) 69.9 in (1.78 m) NA NA NA 8 ft 11 8 ft 10 8 ft 7 11 ft 2 in in in in (2.73 (2.69 (2.62 (3.41 m) m) m) m) 8 ft 11 8 ft 10 8 ft 7 11 ft 7 in in in in (2.73 (2.69 (2.62 (3.54 m) m) m) m) 8 ft 11 in (2.73 m) 8 ft 10 in (2.69 m) 8 ft 7 in (2.62 m) NA 14.8 in (375 mm) 23 23 ft 7 in (7.13 m) 22 ft 7 in (6.88 m) 7 ft 9 in (2.36 m) 23 ft 7 in (7.19 m) 22 ft 8 in (6.91 m) 7 ft 9 in (2.36 m) NA NA NA Extendahoe Extended
N.
NOTE: Dimensions taken with 21L x 24 rear tires and 14.5/75L x 16.1 front tires except that data marked 4WD is taken with 14 x 17.5 front tires.
CYLINDERS
Bore Diameter Loader Lift (2) Bucket (2) 4 IN 1 clam (2) Backhoe Boom Dipperstick Bucket Extendahoe Swing (2) Stabilizer (2) Steering 2WD 4WD 2.75 in (69.9 mm) 2.48 in (63 mm) 1.5 in (38.1 mm) 1.5 in (38.1 mm) 6.7 in (170 mm) 9.53 in (242 mm) 5.5 in (139.7 mm) 5.5 in (139.7 mm) 3.75 in (95 mm) 3.0 in (76 mm) 4.0 in (101.6 mm) 5.0 in (127 mm) 2.5 in (63 mm) 2.75 in (69.9 mm) 2.75 in (69.9 mm) 1.75 in (44.5 mm) 2.0 in (50.8 mm) 2.25 in (57.2 mm) 38.4 in (976 mm) 22.2 in (564.2 mm) 34.3 in (872 mm) 48.0 in (1.22 m) 11.5 in (292 mm) 20.4 in (519.4 mm) 3.5 in (89 mm) 3.25 in (83 mm) 3.0 in (76 mm) 1.75 in (44.5 mm) 1.75 in (44.5 mm) 1.75 in (44.5 mm) 30.2 in (766 mm) 20.6 in (522 mm) 9.1 in (231 mm) Rod Diameter Stroke
Boom and Dipper Lift Capacities are rated per SAE J31 and are 87% of the maximum hydraulic lift force available with the specified options.
Boom Lift +18 ft (5.48 m) +16 ft (4.87 m) +14 ft (4.27 m) +12 ft (3.66 m) +10 ft (3.05 m) +8 ft (2.44 m) +6 ft (1.83 m) +4 ft (1.22 m) +2 ft (0.61 m) Ground Level -2 ft (0.61 m) -4 ft (1.22 m) -6 ft (1.83 m) -8 ft (2.44 m) -10 ft ft (3.05 m) -12 ft (3.66 m) -14 ft (4.27 m) -15 ft (4.57 m) Dipper Lift +16 ft (4.87 m) +14 ft (4.27 m) +12 ft (3.66 m) +10 ft (3.05 m) +8 ft (2.44 m) +6 ft (1.83 m) +4 ft (1.22 m)
Extendahoe Retracted Extended Distance from Backhoe lift Distance from Backhoe lift swing pivot (m) capacity lb (kg) swing pivot (m) capacity lb (kg) 1,940 (880) 13 ft 6 in (4.11) 10 ft 8 in (3.25) 12 ft 9 in (3.89) 14 ft 2 in (4.32) 15 ft 2 in (4.62) 15 ft 11 in (4.85) 16 ft 3 in (4.96) 16 ft 4 in (4.98) 16 ft 1 in (4.91) 15 ft 8 in (4.77) 14 ft 11 in (4.55) 13 ft 9 in (4.19) 12 ft 2 in (3.71) 9 ft 10 in (2.99) 5 ft 8 in (1.72) 3,310 (1501) 3,280 (1488) 3,410 (1547) 3,330 (1510) 3,390 (1538) 3,280 (1488) 3,210 (1456) 3,120 (1415) 3,010 (1365) 2,950 (1338) 2,850 (1293) 2,840 (1288) 2,810 (1275) 2,880 (1306) 15 ft 5 in (4.70) 16 ft 10 in (5.13) 17 ft 11 in (5.46) 18 ft 9 in (5.72) 19 ft 3 in (5.87) 19 ft 7 in (5.97) 19 ft 8 in (5.99) 19 ft 6 in ft (5.94) 19 ft 2 in (5.84) 18 ft 6 in (5.64) 17 ft 8 in (5.38) 16 ft 6 in (5.03) 14 ft 10 in (4.52) 12 ft 9 in (3.89) 9 ft 9 in (2.97) 6 ft 0 in (1.83) 12 ft 10 in (3.91) 2,200 (998) 2,300 (1043) 2,420 (1098) 2,370 (1075) 2,420 (1098) 2,420 (1098) 2,310 (1048) 2,290 (1039) 2,260 (1025) 2,230 (1012) 2,220 (1007) 2,140 (971) 2,110 (957) 2,090 (948) 2,180 (989) 2,240 (1016) 2,490 (1129) 2,810 (1275) 2,940 (1334) 3,080 (1397) 3,100 (1406) 3,150 (1429) 3,190 (1447) 3,290 (1492)
4,800 (2177) 5,290 (2399) 5,580 (2531) 5,750 (2608) 5,630 (2554) 6,490 (2944)
4,850 (2200) 5,310 (2409) 5,510 (2500) 5,720 (2595) 5,740 (2604) 6,590 (2989)
Retracted 15 ft 11 in (4.85 m) 16 ft 4 in (4.98 m) 15 ft 10 in (4.83 m) 14 ft 11 in (4.55 m) 23 ft 3 in (7.09 m) 19 ft 8 in (5.99 m) 11 ft 5 in (3.48 m) 9 ft 6 in (2.90 m) 180 164 190 11 ft 1 in (3.38 m) 14,718 lbf (65 469 N) 8,449 lbf (37 583 N) w/bucket @ 50
Extended 19 ft 11 in (6.07 m) 20 ft 4 in (6.20 m) 19 ft 10 in (6.05 m) 19 ft 2 in (5.84 m) 27 ft 2 in (8.28 m) 23 ft 7 in (7.19 m) 13 ft 9 in (4.19 m) 12 ft 9 in (3.89 m) 180 164 190 11 ft 1 in (3.38 m) 14,718 lbf (65 469 N) 5,999 lbf (26 685 N) w/bucket @ 51
15 ft 11 in (4.85 m) 16 ft 4 in (4.98 m) 15 ft 10 in (4.83 m) 14 ft 11 in (4.55 m) 23 ft 3 in (7.09 m) 19 ft 8 in (5.99 m) 11 ft 5 in (3.48 m) 9 ft 6 in (2.90 m) 80 164 200 11 ft 1 in (3.38 m) 14,718 lbf (65 469 N) 8,449 lbf (37 583 N) w/bucket @ 50
12
12
12
Lift capacities apply straight to the rear of prime mover. Equipped with 24 in (610 mm) Universal H.D. trenching bucket and Case
STANDARD EQUIPMENT
OPERATORS COMPARTMENT See page 2 ENGINE Case Family IV 445TA/E3 internal EGR turbocharged diesel Tier III certified Integral crank driven balancer Automatic fan belt tensioner Viscous fan drive Integral engine oil cooling Primary 5 micron fuel filter Secondary 30 micron fuel filter w/ water trap Dual element air cleaner with integral pre-cleaner 90 amp alternator 850 CCA 12-volt battery Heavy-duty radiator w/deaeration bottle Non-spark-arresting muffler Aspirated air cleaner Swing out fuel cooler LOADER See page 2 BACKHOE See page 2 POWERTRAIN 2WD 4F/4R Power shuttle synchromesh transmission Torque converter Transmission de-clutch Electro-hydraulic differential lock Hydrostatic steering Outboard wet disc brakes Remote lube front axle pivot HYDRAULICS 2-spool loader control valve 6-spool backhoe control valve Heavy-duty oil cooler OTHER Forward tilt engine hood Replaceable, molded front bumpers Front/rear tie downs Reflective logos Lights - Cab and Canopy (2) Rear tail/stop (2) Front flashers/turn (2) Rear flashers/turn (2) Front & 4 rear adjustable halogen lights (55 w)
OPTIONAL EQUIPMENT
OPERATORS COMPARTMENT Cab with Air-conditioning, 100% filtered air, in-cab filter access, 8 adjustable roof vents, 2 floor vents, w/heater Defroster Dome light - door activated Wipers, front and rear Tinted glass Floor mat Tilt wheel Side window partial hold open Inside release for side windows Cab Convenience Package Vinyl-covered interior Reduced sound level to 72 dB(A) Radio-ready kit w/antenna and speakers Windshield washer w/adjustable nozzles (front & rear) Sun visor PLUS Vinyl or cloth-covered mechanical suspension seat Air Ride suspension seat 3 in (76 mm) retractable seat belt Swing out condenser and fuel cooler Ride Control Cab, right door (only w/AC) Canopy Convenience Package Front windshield w/wiper & washer 85 dB(A) sound Floor mat Sun visor LOADER Hydraulic attachment coupler Attachment auxiliary hydraulics 3-spool valve hydraulics w/ thumb controlled electro hydraulic switch w/detent Buckets (see page 2) BACKHOE Case integrated hydraulic coupler Buckets (see page 2) Two-lever control Front counterweights 440 lb (200 kg) 900 lb (408 kg) ENGINE Cold weather grid heater starting aid w/dual 12volt 850 CCA batteries Spark arresting muffler POWERTRAIN 4 WD w/outboard planetary drive, on-the-go push -button activation and 14 x 17.5 front tires Comfort Steer HYDRAULICS Auxiliary backhoe uni-directional hydraulics Auxiliary backhoe bi-directional hydraulics Hand lever operated for manual controls Button operated for pilot controls OTHER Tool box Special paint
NOTE: All specifications are stated in accordance with SAE Standards or Recommended Practices, where applicable. NOTE: All engines meet current EPA emissions requirements. IMPORTANT: Case Construction Equipment Inc. reserves the right to change these specifications without notice and without incurring any obligation relating to such change. Case Construction Equipment Inc. does not warrant the safety or reliability of attachments from other manufacturers.
Case is a registered trademark of CNH America LLC. Any trademarks referred to herein, in association with goods and/or services of companies other than CNH America LLC, are the property of those respective companies.
www.casece.com
Printed in U.S.A.