Scribd Logo
Upload

Welcome to Scribd!

  • 375 views

    Mpa 2000X

    Uploaded by

    tep365
    M-P-A 2000 X is an easily incorporated, highly efficient organic antisettling and sag control additive. It is supplied as a pourable dispersion in xylene. For proper activation, the additive requires heat and shear and a minimum dwell time of 15 to 30 minutes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Mpa 2000X

    Uploaded by

    tep365
    375 views2 pages
    M-P-A 2000 X is an easily incorporated, highly efficient organic antisettling and sag control additive. It is supplied as a pourable dispersion in xylene. For proper activation, the additive requires heat and shear and a minimum dwell time of 15 to 30 minutes.

    Original Title

    MPA 2000X

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    M-P-A 2000 X is an easily incorporated, highly efficient organic antisettling and sag control additive. It is supplied as a pourable dispersion in xylene. For proper activation, the additive requires heat and shear and a minimum dwell time of 15 to 30 minutes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    375 views2 pages

    Mpa 2000X

    Uploaded by

    tep365
    M-P-A 2000 X is an easily incorporated, highly efficient organic antisettling and sag control additive. It is supplied as a pourable dispersion in xylene. For proper activation, the additive requires heat and shear and a minimum dwell time of 15 to 30 minutes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    M-P-A 2000 X

    Liquid Antisettling Agent for Solvent-Borne Systems GENERAL INFORMATION M-P-A 2000 X is an easily incorporated, highly efficient organic antisettling and sag control additive supplied as a pourable dispersion in xylene. PHYSICAL PROPERTIES
    Composition Color / Form Density Solvent Non-volatile content Flash point (closed cup) organic compound translucent white, liquid 0.88 g/cm xylene 20 % 25C (77 F)

    improved sag control with good levelling

    INCORPORATION Being a liquid additive, M-P-A 2000 X is more readily and rapidly incorporated than powder or pregel antisettling agents. For proper activation, the additive requires heat and shear and a minimum dwell time of 15 to 30 minutes. High speed disc impellers, pearl mills, sand and ball mills, triple-roll mills, etc. are suitable dispersing equipment.
    M-P-A 2000 X antisettling additive must be present during the pigment dispersion stage, preferably premixed in the binder/solvent blend before the addition of other mill-base components. When M-P-A 2000 X antisettling additive is used in combination with other rheological additives, the proper order of addition is of importance. THIXATROL ST or the various BENTONE additive grades must be thoroughly dispersed and, where necessary, activated with a chemical activator prior to the addition of M-P-A 2000 X. Further details on incorporation are given in the various product data sheets and in the Elementis Specialties Rheology Handbook. Maximum efficiency requires the following minimum temperatures and a dwell time of at least 15 minutes: Solvent minimum incorporation temperature 43 C / 110 F 54 C / 130 F

    APPLICATIONS Antisettling additive for solvent-borne systems.


    It is also an effective sag control additive in highpolarity formulations and in the presence of high levels of pigment dispersion media. NOTE: M-P-A 2000 X contains ~ 0.8% water and may cause gassing when used in coatings containing reactive metals, e.g. zinc rich systems. If you have a water sensitive application, we recommend the use of M-P-A 4020 X.

    KEY PROPERTIES M-P-A 2000 X antisettling additive liquid easy to handle easily and quickly dispersed in high speed disc impellers or other high-shear equipment, e.g. pearl mills minimum activation temperatures range from 40C to 50C depending on system cost-efficient from low levels of addition no significant effect on system viscosity good viscosity stability of system in storage excellent antisettling performance in lowviscosity conditions, e.g. in dip tanks, spray tanks and lines, bulk storage units

    High polarity, aromatic or oxygenated solvents Lower polarity, mixed aromatic/ aliphatic

    NOTE: The information herein is currently believed to be accurate. We do not guarantee its accuracy. Purchasers shall not rely on statements herein when purchasing any products. Purchasers should make their own investigations to determine if such products are suitable for a particular use. The products discussed are sold without warranty, express or implied, including a warranty of merchantability and fitness for use. Purchasers will be subject to a separate agreement which will not incorporate this document. Copyright, Elementis Specialties, Inc. All rights reserved. Copying and/or downloading of this document or information therein for republication is not allowed unless prior written agreement is obtained from Elementis Specialties, Inc. Trademark of Elementis Specialties, Inc. www.elementis-specialties.com doc16Jan 09

    M-P-A 2000 X

    LEVELS OF USE The optimum M-P-A 2000 X antisettling agent addition level will depend on the coating system and may vary between 1.0% and 2.0% by weight. In some systems as little as 0.5-0.8% by weight will be sufficient (as supplied and related to total weight of system) HEALTH AND SAFETY DATA Before using this product please consult our Material Safety Data Sheet (MSDS) for information on safe handling and storage. MSDSs can be found on the company website at www.elementisspecialties.com. STORAGE RECOMMENDATIONS Store in a cool, dry location. Store above 40 F (4 C). Keep partially used container well sealed to prevent solvent loss. SHELF LIFE M-P-A 2000 X has a shelf life of 2 (two) years from date of manufacture. QUALITY ASSURANCE Since 1992 the company is a holder of the ISO 9001 / ISO 9002 certificates, which guarantees that all operations are conducted according to the stipulated standards.

    USA Head Office


    Elementis Specialties, Inc. P.O. Box 700 329 Wyckoffs Mill Road Hightstown, NJ 08520 USA Tel.: +1 609 443 2500 Fax: +1 609 443 2422

    Europe
    Elementis Service Centre NV De Kleetlaan 12A, P.O. Box 3 1931 Diegem, Belgium Tel.: +32 2 790 76 00 Fax: +32 2 790 76 60

    Asia
    Elementis Specialties, Inc. 120 Jalan Kapar 27/89 40400 Shah Alam Malaysia Tel.: +60 3 5192 2887 Fax: +60 3 5192 3887

    Japan
    Elementis Japan KK 15-14 Minaminisemba 1-Chome Chou-Ku, Osaka 542-0081 Japan Tel.: +81 6 6267 6211 Fax: +81 6 6267 6215

    You might also like