Scribd Logo
Upload

Welcome to Scribd!

  • 269 views

    Bucket Truck Safety-Pioneer

    Uploaded by

    hazopman
    This document provides safety guidelines for operating bucket trucks, also known as aerial lifts. It defines various types of aerial lifts and responsibilities of operators. It discusses hazards like falls and electrocution and provides prevention methods like personal protective equipment and fall protection. It also covers inspection, positioning, emergency response and maintenance procedures.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Bucket Truck Safety-Pioneer

    Uploaded by

    hazopman
    269 views4 pages
    This document provides safety guidelines for operating bucket trucks, also known as aerial lifts. It defines various types of aerial lifts and responsibilities of operators. It discusses hazards like falls and electrocution and provides prevention methods like personal protective equipment and fall protection. It also covers inspection, positioning, emergency response and maintenance procedures.

    Original Description:

    truck

    Original Title

    Bucket Truck Safety-pioneer

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides safety guidelines for operating bucket trucks, also known as aerial lifts. It defines various types of aerial lifts and responsibilities of operators. It discusses hazards like falls and electrocution and provides prevention methods like personal protective equipment and fall protection. It also covers inspection, positioning, emergency response and maintenance procedures.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    269 views4 pages

    Bucket Truck Safety-Pioneer

    Uploaded by

    hazopman
    This document provides safety guidelines for operating bucket trucks, also known as aerial lifts. It defines various types of aerial lifts and responsibilities of operators. It discusses hazards like falls and electrocution and provides prevention methods like personal protective equipment and fall protection. It also covers inspection, positioning, emergency response and maintenance procedures.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4
    At a glance
    Powered by AI
    The key takeaways from the document are that only properly trained employees are allowed to operate bucket trucks, and safety precautions like fall protection, insulated gloves, and avoiding contact with power lines must be followed.

    Bucket truck operators are only responsible for operating equipment they have been trained on. They must keep untrained employees from entering the bucket and wear all required personal protective equipment.

    Hazards associated with operating bucket trucks include falls, tip-overs, and electrocution from power lines. Operators must be aware of minimum safe distances from power lines based on their voltage.

    Bucket Truck Safety

    BUCKET TRUCK SAFETY


    The following guidelines have been established to reduce the risk of incident and personal injury when working with or in close proximity to Pioneer bucket trucks (aka aerial lifts). Definitions Aerial lift devices are used to elevate personnel to job sites above the ground. These include extensible boom platforms, aerial ladders, and aerial ladder trucks, articulating boom platforms, vertical towers and any combination of these devices. Aerial lift devices may be constructed of metal, wood, fiberglass, reinforced plastic or other materials An aerial device includes any vehicle-mounted device telescoping or articulating or both which is used to position personnel. An articulating boom platform is an aerial device with two or more hinged boom sections. An extensible boom platform is an aerial device (except ladders) with a telescopic or extensible boom. A mobile unit is a combination of an aerial device, its vehicle and related equipment. A platform, or elevated platform, is any personnel-carrying device that is a component of an aerial device. A vehicle is any carrier that is not manually propelled.

    Responsibilities Only properly trained and authorized employees are permitted to operate aerial lift devices. Employees have a responsibility to keep un-trained employees from entering and using the bucket and lift. Employees are responsible to wear all the required personal protective equipment. Hazard/Risk Analysis Whenever bucket trucks are operated in the vicinity of energized electrical utility lines the potential for electrocution exists. Even house drops and telephone circuits can be energized with enough voltage to kill. Lifts allow personnel to perform work above ground, creating a fall hazard. Operators must be aware of hazards including falls, tip-overs and electricity. Be aware of safe distances listed in Table R-2.
    TABLE R-2 - APPROACH DISTANCES TO EXPOSED ENERGIZED OVERHEAD POWER LINES AND PARTS Voltage range (phase to phase, RMS) 300 V and less Over 300V, not over 750V Over 750V not over 2 kV Over 2 kV, not over 15 kV Over 15 kV, not over 37 kV Over 37 kV, not over 87.5 kV Over 87.5 kV, not over 121 kV Over 121 kV, not over 140 kV
    1

    Approach distance (inches) (1 ) 12 18 24 36 42 48 54

    Avoid contact.

    Bucket Truck Safety

    Prevention and Control Bucket trucks differ enough that even trained workers should not operate a bucket truck they are unfamiliar with on the job. Buckets or baskets are required to be at least 39 deep to put the lip above the waists of most workers and reduce the risk of falling out. Safety features such as guards, outrigger interlock and ground fault interrupter circuits, and warning labels are included on bucket trucks. These are designed to help prevent accidents and may not be modified or removed. All employees are required to wear the personal protective equipment provided with each bucket truck operation: ANSI approved hardhat Eye protection Fall restraint system/Fall arrest system Insulated gloves where electrocution risk is possible Bucket truck workers must wear a fall-restraint safety belt system or a full-body harness fall arrest system. Fall arrest equipment, work positioning equipment or travel restricting equipment shall be used by employees working at elevated locations more than 4 feet above the ground. When stopping or arresting a fall, personal fall arrest systems shall limit the maximum arresting force on an employee to 900 pounds if used with a body belt. When stopping or arresting a fall, personal fall arrest systems shall limit the maximum arresting force on an employee to 1800 pounds if used with a body harness. Personal fall arrest systems shall be rigged such than at employee can neither free fall more than 6 feet nor contact any lower level. If vertical lifelines or drop lines are used, not more than one employee may be attached to any one lifeline. Bucket Truck Preparation and Positioning Process Fall-arrest/Fall-restraint equipment must be thoroughly inspected by a competent person before each use. Look for cuts, holes, tears, abrasions, frays, burns, chemical damage, and other signs of wear. Examine hardware to make sure it is in proper working order. Depending on how the truck is equipped, an inspection will be performed prior to each use: Tire pressure Test lift controls Lights Traffic cones stored Beacons Warning signs and flags stored Vehicle fluid levels First aid kit stored Outriggers and pads Fire extinguisher present Emergency brake Emergency rescue equipment Leveling system Hydraulic lubrication Pin retainers Structural and mechanical integrity Communications equipment Jib boom and other material handling Boom and boom rest Electrical circuits, including ground fault interrupter, start-stop and auxiliary circuits. Controls are plainly marked to their function

    Bucket Truck Safety

    Any problems found during an inspection must be corrected before a bucket truck is operated. Before driving the bucket truck, perform a walk around inspection to make sure the boom is cradled and tied down and all other equipment is secure. Never move a bucket truck with the boom in an elevated position. The driver and all passengers will wear their seatbelts. Workers will survey the site prior to positioning the truck to perform work. Look for and avoid hazards that may set the stage for tip-over. The truck should have the emergency brake applied and wheels chocked. Outrigger pads may be necessary to assure firm footing. When extending or retracting outriggers verify that all workers are outside the danger zone. Follow signs and barricades rules for notifying traffic of work zone (located in this Safety & Health Manual). Personnel should remove all climbers or gaffs or unnecessary metal objects that they might be wearing to minimize electrocution hazards. Fall-arrest/Fall-restraint equipment should be properly attached to anchor points supplied by the bucket truck manufacturer; belting off to other objects or structures is prohibited. The accompanying shock-absorbing lanyard is attached at the center of the wearers back, between the shoulder blades, fall-arrest system. While performing work the employee should remain boxed-in. Stand firmly on the floor with both feet, not sitting or climbing on the bucket lip and never leaning out of the bucket. Do not use planks, ladders or other devices as substitute work positions. Do not move the aerial lift trucks with employees located in the elevated work boom position. Attending personnel may not operate lower controls unless permission has been obtained from the employee in the elevated platform except in the case of an emergency. Bucket operators will take note of the location of co-workers on the ground prior to lowering the boom to avoid striking any employees working below. Do not exceed the manufactures load limits for boom or bucket load. Emergency Response If the work cannot be performed in an approved manner using the bucket truck, personnel must find another approach. If a worker becomes injured in the bucket or falls from the bucket and sustains injuries, call 911 immediately. Emergency numbers are posted in all bucket trucks near the dashboard. Then notify Human Resources. Report your location as specifically as possible. Equipment Maintenance Aerial lift devices may not be field modified for use other than those intended by the manufacturer. All modifications shall be pre-approved in writing by the manufacture or by an equivalent authority, such as a nationally recognized testing laboratory, to be in conformity with ANSI/SIA A92.5-1992 requirements to be at least as safe as the equipment prior to modification. Whenever a fall-arrest system prevents a fall, it must be examined by a competent person and certified sound before it is reused. Whenever new equipment is acquired an initial inspection and test based on the manufa cturers manuals will be performed. The Pioneer mechanic will also be responsible for periodic minor and major maintenance performed, and to check the manufacturer's manual for each truck to determine maintenance requirements.

    Bucket Truck Safety


    Corrective Action Please refer to the Corrective Action section of the Pioneer Personnel Manual. Training Training on bucket trucks for Pioneer employees will include manufacturer requirements, Pioneer rules, and government regulations in the curriculum. Training will occur every three years, sooner for observed unsafe work practices or if new employees are required to receive training as a condition of employment. Recordkeeping Human Resources and Outside Plant will retain initial employee training records of individuals authorized to operate specific aerial lift devices. Training curriculum will be stored with the Human Resources training file, while certifications will be filed in the employees personnel file. Inspection records will be maintained by the operating employees and stored at the White House. Vehicle and platform maintenance records will be maintained by the company Mechanic and kept with records at the Warehouse. All field modifications made on bucket trucks will be recorded in detail and filed with manufacturer approvals with the Mechanics file at the Warehouse.

    You might also like