Control

What type of output? What type of output?
How many loops are required?

What type of control is needed?
No display Single digital display Digital display Dual digital display
Relay Voltage (pulse)
Basic GeneraI purpose Programmer
SingIe Ioop
Voltage (pulse) /
relay / mA linear
K8AB-TH E5C2 E5CSV E5_N E5_K-T
Temperature controllers
Temperature uniformity made easy
With E5ZN temperature
controllers, all temperatures
are equal
Omron's E5ZN temperature controllers
feature GTC, the innovative new gradient
temperature control technology.
GTC provides perfectly-controlled 2D
temperature profles over any size sheet
and eliminates all irregularities in sheet-
processing temperature to provide faster
throughput and high, consistent quality and
yield. E5ZN types are available with inputs
for thermocouple or PRT signals and with
voltage, transistor or analogue outputs.
Up to fve E5ZN controllers can be connected
together to apply GTC to up to 10 heating
elements and a DeviceNet communications
unit is available to provide centralised
control. E5ZN - the perfect solution for 2D
processing temperature control.
220
What type of mounting is required?
Advanced On-paneI In-paneI
MuIti-Ioop
Digital display
E5ZN E5_R
Now available in a choice
of dimensions!
Omron's best-selling E5CN temperature controller
is now joined by the upgraded versions of the E5AN
and E5EN, offering the same superb features. The
E5_N series includes a bright LCD display that
gives a clear read-out, even under a wide viewing
angle and harsh lighting conditions. They feature
a colour change display with process values in
three colours for easy status recognition, and
an 11-segment display that makes text easy to
understand.
The unique 2-PD provides optimum control
performance. Plus, the E5_N series is easy to set
up and operate. t has customisable menus and
parameter protection, as well as PC software tools
for parameter cloning, setting and tuning. Trust
Omron to set the pace in temperature control
evolution!
The E5_N series evolution in temperature control
221
Table of contents
Selection table 222
Basic temperature controller K8AB-TH 224
E5C2 225
E5CSV 226
General purpose controller E5@N 227
E5ZN 229
Advanced controller E5@K / E5@K-T 230
E5@R 231
Auxiliaries PRT1-SCU11 233
222
Selection table
*7
Fuzzy PID available
Category
Alarm
controller
Analogue
temperature
controller
Compact digital
temperature
controller
Digital temperature controller
S
e
l
e
c
t
i
o
n

c
r
i
t
e
r
i
a
Model K8AB-TH E5C2 E5CSV E5AN E5EN E5CN E5GN
Type Basic General purpose
Panel In-panel type In- & on-panel type On-panel type
Loops Single loop
Size 22.5 mm wide 1/16 DIN 1/16 DIN 1/4 DIN 1/8 DIN 1/16 DIN 1/32 DIN
C
o
n
t
r
o
l

m
o
d
eON / OFF
PID
*1
*1
P only
2-PID
*2
*2
2-PID is OMRONs unique high-performance PID control

Operation
*3
*3
H = heat, H / C = heat or cool, H & C = heat and cool
H H / C H & C H & C H & C H & C
Position proportional
*4
*4
Position proportional = valve control (relay up & down)
F
e
a
t
u
r
e
s
Accuracy 2% 0.5% 0.5% 0.5% 0.5% 0.5%
Auto-tuning
Self-tuning
Transfer output
Remote input
Number of alarms 1 2 3 3 3 1
Heater burnout
*5
*5
Heater alarm = heater burnout & SSR failure detection
IP rating front panel IP20 IP40 IP65 IP66 IP66 IP66 IP66
Display Rotary switch SV dial Single 3.5 digit Dual 4 digit
colour change
Dual 4 digit
colour change
Dual 4 digit
colour change
Dual 4 digit
S
u
p
p
l
y

v
o
l
t
a
g
e
110 / 220 VAC 100 to 240 100 to 240
24 VAC / VDC
C
o
m
m
s

*
6
*6
PROFIBUS-DP communication option via gateway for E5_N, E5_R, E5ZN, ask your local OMRON representative.
RS-232
RS-485
Event IP
QLP port
DeviceNet
C
o
n
t
r
o
l

o
u
t
p
u
t
Relay
SSR
Voltage (pulse)
Linear voltage
Linear current
I
n
p
u
t

t
y
p
e

-

l
i
n
e
a
r
mA
mV
V
I
n
p
u
t

t
y
p
e

-

t
h
e
r
m
o
c
o
u
p
l
e
K
J
T
E
L
U
N
R
S
B
W
PLII
I
n
p
u
t

t
y
p
e

-

R
T
D
Pt100
JPt100
THE
Page 224 225 226 227
223
Digital
temperature
controller
Digital process controller
E5ZN E5AK E5EK E5CK E5AK-T E5EK-T E5CK-T E5AR E5ER
Modular Universal Universal / programmer Advanced
In-panel type On-panel type
Multi-loop Single loop Multi-loop
22.5 x 130 mm 1/4 DIN 1/8 DIN 1/16 DIN 1/4 DIN 1/8 DIN 1/16 DIN 1/4 DIN 1/8 DIN

H & C H & C H & C H & C H & C H & C H & C H & C H & C

0.5% 0.3% 0.3% 0.3% 0.3% 0.3% 0.3% 0.1% 0.1%

2 3 3 3 3 3 3 4 4
Loop burnout Loop burnout
IP66 IP66 IP66 IP66 IP66 IP66 IP66 IP66
Dual 4 digit Dual 4 digit Dual 4 digit Dual 4 digit Dual 4 digit Dual 4 digit Dual 4 digit Triple 5 digit Triple 5 digit

229 230 231
Standard Available No / not available
For full specifications and additional models please refer to the (attached) CD or www.europe.omron.com
Temperature controllers - Cat.-No. N150-E2-01 224
K8AB-TH
Affordable and compact temperature
alarm unit
This temperature monitoring relay was designed specially for monitor-
ing abnormal temperatures to prevent excessive temperature increase
and to protect equipment. K8AB-TH provides temperature monitoring in
slim design with a width of just 22.5 mm.
Simple function settings using DIP switch
Selectable alarm latch and SV setting protection
Multi-input support for thermocouple or Pt100 sensor input
Changeover relay: fail-safe selectable
Alarm status identification with LED
Ordering information
Specifications
Input type Temperature setting range Setting unit Supply voltage Size in mm (HxWxD) Model
Thermocouple /
Pt100
0 to 399 C / F 1 C / F 100 to 240 VAC 90x22.5x100 K8AB-TH11S 100-240
24 VAC / VDC K8AB-TH11S 24
Thermocouple 0 to 1,800 C
0 to 3,200 F
10 C / F
*1
*1
Setting range depending on sensor type selected
100 to 240 VAC K8AB-TH12S 100-240
24 VAC / VDC K8AB-TH12S 24
100 to 240 VAC 50 / 60 Hz 24 VAC 50 / 60 Hz or 24 VDC
Allowable voltage range 85% to 110% of power supply voltage
Power consumption 5 VA max. 2 W max. (24 VDC), 4 VA max. (24 VAC)
Sensor inputs K8AB-TH11S Thermocouple: K, J, T, E; platinum-resistance thermometer: Pt100
K8AB-TH12S Thermocouple: K, J, T, E, B, R, S, PLII
Output relay One SPDT relay (3 A at 250 VAC, resistive load)
External inputs
(for latch setting)
Contact input ON: 1 k2 max., OFF: 100 k2 min.
Non-contact input ON residual voltage: 1.5 V max., OFF leakage current: 0.1 mA max.
Leakage current: approx. 10 mA
Setting method Rotary switch setting (set of three switches)
Indicators Power (PWR): green LED, relay output (ALM): red LED
Other functions Alarm mode (upper limit / lower limit), output normally ON / OFF selection, output latch, setting protection,
temperature unit C / F
Ambient operating temperature -10 C to 55 C (with no condensation or icing); for 3-year guarantee: -10 C to 50 C
Storage temperature -25 C to 65 C (with no condensation or icing)
Setting accuracy 2% of full scale
Hysteresis width 2 C
Output relay Resistive load 3 A at 250 VAC (cos = 1), 3 A at 30 VDC (L / R = 0 ms)
Inductive load 1 A at 250 VAC (cos= 0.4), 1 A at 30 VDC (L / R = 7 ms)
Minimum load 10 mA at 5 VDC
Maximum contact voltage 250 VAC
Maximum contact current 3 A AC
Maximum switching capacity 1,500 VA
Mechanical life 10,000,000 operations
Electrical life Make: 50,000 times, break: 30,000 times
Sampling cycle 500 ms
Weight 130 g
Degree of protection IP20
Memory protection Non-volatile memory (number or writes: 200,000)
Safety standards Approved standards EN 61010-1
Application standards EN 61326 and EN 61010-1 (pollution level 2, overvoltage category II)
Crimp terminals Two solid wires of 2.5 mm
2
or two ferrules of 1.5 mm
2
with insulation sleeves can be tightened together
Case color Munsell 5Y8/1 (ivory)
Case material ABS resin (self-extinguishing resin)
Mounting Mounted to DIN-rail or with M4 screws
Size in mm 90Hx22.5Wx100D
Temperature controllers - Cat.-No. H081-E2-02 225
E5C2
Easy-to-use, basic temperature
controller with analogue dial setting
OMRON's basic ON / OFF or PD controller features an analogue set-
ting dial. This compact, low-cost controller has a setting accuracy of 2%
of full scale. It incorporates a plug-in socket allowing for DIN-rail or flush
mounting.
Compact, cost-effective controller
Control mode: ON / OFF or PD
Control output: relay
Power supply: 100 - 120 / 200 - 240 VAC
Thermocouple K: 0 to 1200C, L: 0 to 400C, Pt100: -50 to 200C
Accessories
Specifications
Setting method Indication
method
Control mode Output Model Voltage
Thermocouple Platinum resistance
thermometer Pt100
Thermistor THE
K (CA) chromel
vs. alumel
L (IC) iron
vs. constantan
Analogue setting No indication ON / OFF Relay E5C2-R20K E5C2-R20L-D E5C2-R20P-D E5C2-R20G 100/110/120 VAC
P Relay E5C2-R40K E5C2-R40L-D E5C2-R40P-D 200/220/240 VAC
Input ranges Thermocouple
*1
*1
Values in ( ) are the minimum unit. Bold = preferred stock item
*3
Platinum resistance thermometer Thermistor
*2
*2
Values in ( ) are the thermistor resistive value.
*3
Preferred stock items are R20. Types + 200-240 AC
K (CA) chromel vs. alumel L (IC) iron vs. constantan Pt100 THE
C 0 to 200 (5),
0 to 300 (10),
0 to 400 (10),
0 to 600 (20),
0 to 800 (20),
0 to 1,000 (25),
0 to 1,200 (25)
0 to 200 (5),
0 to 300 (10),
0 to 400 (10)
5 to 450 (10)
-50 to 50 (2),
-20 to 80 (2),
0 to 50 (1),
0 to 100 (2),
0 to 200 (5),
0 to 300 (10),
0 to 400 (10)
-50 to 50 (2) (6 k at 0 C),
0 to 100 (2) (6 k at 0 C),
50 to 150 (2) (30 k at 0 C)
F 32 to 392 (10),
32 to 572 (20),
32 to 752 (20),
32 to 1,112 (40),
32 to 1,472 (50),
32 to 1,832 (50),
32 to 2,192 (50)
32 to 392 (10),
32 to 572 (20),
32 to 752 (20)
32 to 212 (5),
32 to 392 (10)
Functions Model
Front connecting socket with finger protection P2CF-08-E
Back connecting socket (for flush mounting) P3G-08
Finger protection cover (for P3G-08) Y92A-48G
Protective front cover (IP66) Y92A-48B
Thermocouple input type K, L (with sensor break detection)
RTD input type Pt100, THE
Control mode ON / OFF or P control
Setting method Analogue setting
Output Relay, SPDT, 3 A at 250 VAC
Life expectancy Electrical: 100,000 operations min.
Setting accuracy 2% FS max.
Hysteresis Approx. 0.5% FS (fixed)
Proportional band 3% FS (fixed)
Reset range 5 1% FS min.
Control period 20 s
IP Rating front panel IP40 (IP66 cover available)
IP rating terminals IP00
Ambient temperature -10 C to 55 C
Size in mm 48Hx48Wx96D
Temperature controllers - Cat.-No. H138-E2-01-X 226
E5CSV
Easy setting using DIP switch
and simple functions within
DIN 48x48 mm
This multi-range 1/16 DIN controller with alarm function offers
field-selectable PID control or ON / OFF control. The large, single
display shows process value, direction of deviation from set point,
output and alarm status.
All setting field configurable with switches
Multi-input (thermocouple / Pt100)
Clearly visible 3.5-digit display with character height of 13.5 mm
Control output: relay, voltage (for driving SSR)
ON / OFF or 2-PID control with auto-tuning and self-tuning
Note: Other models are available on request. Bold = preferred stock item
Specifications
Size in mm Power supply voltage Number of alarm
points
Control output TC/Pt universal input
case color: black
1/16 DIN
48Hx48Wx78D
100 to 240 VAC 1 Relay E5CSV-R1T-500 AC100-240
Voltage (for driving SSR) E5CSV-Q1T-500 AC100-240
24 VAC / VDC 1 Relay E5CSV-R1TD-500 AC/DC24
Voltage (for driving SSR) E5CSV-Q1TD-500 AC/DC24
Supply voltage 100 to 240 VAC, 50 / 60 Hz or 24 VAC / VDC (depending on model)
Operating voltage range 85% to 110% of rated supply voltage
Power consumption 5 VA
Sensor input Multi-input (thermocouple / platinum resistance thermometer): K, J, L, T, U, N, R, Pt100, JPt100
Control output Relay output SPST-NO, 250 VAC, 3A (resistive load)
Voltage output (for driving SSR) 12 VDC, 21 mA (with short-circuit protection circuit)
Control method ON / OFF or 2-PID (with auto-tune and self-tune)
Alarm output SPST-NO, 250 VAC, 1 A (resistive load)
Setting method Digital setting using front panel keys (functionality set-up with DIP switch)
Indication 7-segment digital display (character height: 13.5 mm) and deviation indicators
Ambient temperature -10 C to 55 C (with no condensation or icing)
Setting / indication accuracy 0.5% of indication value or 1 C, whichever is greater 1 digit max.
Hysteresis (for ON / OFF control) 0.2% FS (0.1% FS for multi-input (thermocouple / platinum resistance thermometer) models)
Proportional band (P) 1 to 999 C (automatic adjustment using AT / ST)
Integral time (I) 0 to 1,999 s (automatic adjustment using AT / ST)
Derivative time (D) 0 to 1,999 s (automatic adjustment using AT / ST)
Control period 2 / 20 s
Sampling period 500 ms
Electrical life expectancy 100,000 operations min. (relay output models)
Weight Approx. 120 g (controller only)
Degree of protection Front panel: equivalent to IP66; rear case: IP20; terminals: IP00
Memory protection EEPROM (non-volatile memory) (number of writes: 1,000,000)
E5@N
Compact and intelligent
general-purpose controllers
The E5@N general-purpose line of temperature controllers is available
in 4 standard DIN formats. They all feature a high-intensity dual LCD
display with a wide viewing angle. Except for the E5GN, the series
features 3-colour PV change for easy status recognition.
Control mode: ON / OFF or 2-PID
Control output: relay, hybrid relay, voltage (SSR) or linear current
Power supply: 100 / 240 VAC or 24 VDC / VAC
Easy PC connection for parameter cloning, setting and tuning
Easy set-up and operation
Note: - Output relay: 3 A / 250 VAC, electrical life: 100,000 operations Bold = preferred stock item
- Output voltage (pulse): 12 V, 21 mA
- Hybrid relay (long life relay) electrical life 1,000,000 operations
- Linear current: 0(4) - 20 mA
- Heater alarm = heater burnout + SSR short detection
- Voltage: specify the power supply specifications (voltage) when ordering
Type Input Output Fixed option Alarms 48x24 mm model Voltage
Thermocouple Pt100, JPt100
On-panel relay 1 E5GN-R1TC E5GN-R1P AC100-240 or DC/AC 24
voltage (pulse) E5GN-Q1TC E5GN-Q1P AC100-240 or DC/AC 24
relay RS-485
communication
0 E5GN-R03TC-FLK E5GN-R03P-FLK AC100-240 or DC/AC 24
voltage (pulse) E5GN-Q03TC-FLK E5GN-Q03P-FLK AC100-240 or DC/AC 24
Type Input Output Fixed option Alarms 48x48 mm model Voltage
On-panel temperature
(TC / Pt / mV)
relay 2 E5CN-R2MT-500 AC100-240 or DC/AC 24
voltage (pulse) E5CN-Q2MT-500 AC100-240 or DC/AC 24
linear current E5CN-C2MT-500 AC100-240 or DC/AC 24
hybrid relay E5CN-Y2MT-500 AC100-240
analogue
(mA / V)
relay E5CN-R2ML-500 AC100-240 or DC/AC 24
voltage (pulse) E5CN-Q2ML-500 AC100-240 or DC/AC 24
linear current E5CN-C2ML-500 AC100-240 or DC/AC 24
hybrid relay E5CN-Y2ML-500 AC100-240
In-panel temperature
(TC / Pt / mV)
relay 2 E5CN-R2TU AC100-240 or DC/AC 24
voltage (pulse) E5CN-Q2TU AC100-240 or DC/AC 24
Type Input Output Fixed option Alarms 48x96 mm model 96x96 mm model Voltage
On-panel temperature
(TC / Pt / mV)
linear current 3 E5EN-C3MT-500 E5AN-C3MT-500 AC100-240 or DC/AC 24
hybrid relay 3 E5EN-C3YMT-500 E5AN-C3YMT-500 AC100-240
voltage (pulse) E5EN-C3QMT-500 E5AN-C3QMT-500 AC100-240
voltage (pulse) 3 E5EN-Q3MT-500 E5AN-Q3MT-500 AC100-240 or DC/AC 24
hybrid relay E5EN-Q3YMT-500 E5AN-Q3YMT-500 AC100-240
voltage (pulse) 3 E5EN-Q3QMT-500 E5AN-Q3QMT-500 AC100-240
heater alarm E5EN-Q3HMT-500 E5AN-Q3HMT-500 AC100-240 or DC/AC 24
3-phase HA E5EN-Q3HHMT-500 E5AN-Q3HHMT-500 AC100-240
power supply E5EN-Q3PMT-500 AC100-240
relay 3 E5EN-R3MT-500 E5AN-R3MT-500 AC100-240 or DC/AC 24
voltage (pulse) E5EN-R3QMT-500 E5AN-R3QMT-500 AC100-240
heater alarm E5EN-R3HMT-500 E5AN-R3HMT-500 AC100-240 or DC/AC 24
3-phase HA E5EN-R3HHMT-500 E5AN-R3HHMT-500 AC100-240
power supply E5EN-R3PMT-500 AC100-240
analogue
(mA / V)
linear current 3 E5EN-C3ML-500 AC100-240
voltage (pulse) 3 E5EN-Q3ML-500 AC100-240
hybrid relay E5EN-Q3YML-500 AC100-240
heater alarm E5EN-Q3HML-500 E5AN-Q3HML-500 AC100-240
relay 3 E5EN-R3ML-500 AC100-240
heater alarm E5EN-R3HML-500 E5AN-R3HML-500 AC100-240
E5@N
228
Accessories
E5CN option boards
(do no fit in E5CN-U types; one slot available in each instrument)
E5AN / -EN option boards
(one slot available in each instrument)
E5_N series optional tools
Specifications
Model Option
E53-CNH03N RS-485 heater alarm
E53-CN03N RS-485
E53-CNHBN heater alarm event input
E53-CNBN event input
E53-CNHH03N RS-485 3-phase HA
E53-CNQ03N RS-485 voltage (pulse)
E53-CNQHN heater alarm voltage (pulse)
E53-CNPBN event input power supply
12 VDC / 20 mA
E53-CNPHN heater alarm power supply
12 VDC / 20 mA
Model Option
E53-EN01 RS-232 communications (Compoway-F / Modbus)
E53-EN03 RS-485 communications (Compoway-F / Modbus)
E53-AKB event input
Model Option
E58-CIFQ1 USB PC based configuration cable
CX-Thermo PC based configuration and tuning software
ThermoMini PC based parameter cloning software (free)
P2CF-08-E Standard 8 pin socket for E5CN-@@@U type
Heater alarm yes, optional; 1 + 3-phase option
Thermocouple input type K, J, T, E, L, U, N, R, S, B
RTD input type Pt100, JPt100
Linear input type mV, mA (optional), V (not for -GN)
Control mode ON / OFF, 2-PID, heat and / or cool
Accuracy 0.5% of indicated value
Auto-tuning yes
Self-tuning yes
RS-232 -AN / -EN: optional
RS-485 optional
Event input optional (not for -GN)
QLP port (USB connection PC) yes (not for -GN)
IP Rating front panel IP66
Sampling period 500 ms for -GN, 250 ms for -CN, -EN, -AN
Temperature controllers - Cat.-No. H116-E2-02A 229
E5ZN
In-panel, DIN-rail mounted modular
multi-loop temperature controllers
This modular temperature controller consists of 22.5 mm wide modules
with 2 channels per module. Via RS-485 one can build up to a
maximum of 32 control loops. The modularity of E5ZN enables easy
exchange and replacement of the individual modules.
Output: SSR, transistor, current, transfer outputs and event in- and
outputs
Alarms and load-fail detection, LED indicators for status
Control mode: ON / OFF and 2-PID
Easy connection to PLC and HMI or PC
Configuration by separate setting unit (E5ZN-SDL) and tool software
Note: Terminal units are required for wiring. Purchase separately.
Accessories
Terminal unit (includes bus system without backplane)
Current transformer
Setting display unit
Sockets for E5ZN-SDL
DeviceNet gateway
Specifications
Functions Control output Auxiliary output Input type
*1
*1
Thermocouple models provide analogue input and input for infrared temperature sensors (ES1B). Bold = preferred stock item
Model
Heating or heat / cool
control
*2
Event input:
1 point per unit
*2
When using heating and cooling control functionality, the auxiliary output will be either heating control output or cooling control output.
Heater burnout alarm
*3
*3
When using the heater burnout alarm, purchase a current transformer (CT) separately.
Voltage (pulse)
output
Transistor output: 2 pts
(sinking)
Thermocouple E5ZN-2QNH03TC-FLKDC24
Platinum resistance thermometer E5ZN-2QNH03P-FLKDC24
(sourcing)
Thermocouple E5ZN-2QPH03TC-FLKDC24
Platinum resistance thermometer E5ZN-2QPH03P-FLKDC24
Transistor output Transistor output: 2 pts
(sinking)
Thermocouple E5ZN-2TNH03TC-FLKDC24
Platinum resistance thermometer E5ZN-2TNH03P-FLKDC24
(sourcing)
Thermocouple E5ZN-2TPH03TC-FLKDC24
Platinum resistance thermometer E5ZN-2TPH03P-FLKDC24
Transfer output
*4
*4
When connecting the load of the controlled system, heat control output or cool control output can be allocated to the control output or auxiliary output. When
connecting a recording device or digital panel meter, transfer output (volt) can be allocated to control output or auxiliary output 3 or 4 of analogue output models.
Analogue output
(current output)
*4
(sinking)
Thermocouple E5ZN-2CNF03TC-FLKDC24
Platinum resistance thermometer E5ZN-2CNF03P-FLKDC24
(sourcing)
Thermocouple E5ZN-2CPF03TC-FLKDC24
Platinum resistance thermometer E5ZN-2CPF03P-FLKDC24
no. of terminals Functions Model
24 Master socket, equipped with terminals for
power supply, communications and display unit
E5ZN-
SCT24S-500
18 Extension socket E5ZN-
SCT18S-500
Diameter Model
5.8 dia. E54-CT1
12.0 dia. E54-CT3
Power Supply Model
24 VDC E5ZN-SDL
Type Model
Front-connecting socket (with finger protection) P2CF-11-E
Back-connecting socket (for control panel mounting) P3GA-11
Terminal cover for finger protection Y92A-48G
Functions Model
Connects up to 16 E5ZN modules to DeviceNet
(fits into master socket), 24 VDC supply voltage
E5ZN-DRT
Bold = preferred stock item
Heater burnout yes
Thermocouple input type K, J, T, E, L, U, N, R, S, B
Linear input type mA, 0-50 mV
Control mode 2-PID or ON / OFF Control
Accuracy 0.5% FS
Auto-tuning yes
RS-485 yes
Event input yes
DeviceNet optional
Temperature controllers - Cat.-No. E5@K: H084-E2-04, E5@K-T: H087-E2-03 230
E5@K / E5@K-T
Advanced compact digital process
controllers
The E5@K series of advanced controllers provides standard models
and models with programmer functionality. The modular structure of the
series makes it very versatile. A number of tuning functions are provid-
ed, including auto-tuning, self-tuning and fuzzy self-tuning.
96Hx48Wx100D / 53Hx53Wx100D / 96Hx96Wx100D mm
Control mode: ON / OFF or PID
Control output: relay, SSR, voltage or current
Universal inputs (Pt100 / thermocouple / volt / milliampere)
Supported by ThermoTools PC Software
Note: A single output unit and option unit can be mounted to each E5CK base unit.
Option Units
Specifications
Specification Alarms Standard model Programmer model 48x48 mm Voltage
Base unit 1 E5CK-AA1 E5CK-TAA1 AC100-240 or
DC/AC 24
Base unit with terminal cover E5CK-AA1-500 E5CK-TAA1-500
Standard model 2 E5EK-AA2 E5EK-TAA2 AC100-240 or
DC/AC 24
Standard model with terminal cover E5EK-AA2-500 E5EK-TAA2-500
Position-proportional model E5EK-PRR2 E5EK-TPRR2
Position-proportional model with terminal cover E5EK-PRR2-500 E5EK-TPRR2-500
Standard mode with terminal cover and DeviceNet E5EK-AA2-DRT-500 AC100-240
Standard model 2 E5AK-AA2 E5AK-TAA2 AC100-240 or
DC/AC 24
Standard model with terminal cover E5AK-AA2-500 E5AK-TAA2-500
Position-proportional model E5AK-PRR2 E5AK-TPRR2
Position-proportional model with terminal cover E5AK-PRR2-500 E5AK-TPRR2-500
Model Name Model Specification
E5CK Output units E53-R4R4 Relay / relay
E53-Q4R4 Pulse (NPN) / relay
E53-Q4HR4 Pulse (PNP) / relay
E53-C4R4 Linear (4 to 20 mA) / relay
E53-C4DR4 Linear (0 to 20 mA) / relay
E53-V44R4 Linear (0 to 10 V) / relay
E53-Q4Q4 Pulse (NPN) / pulse (NPN)
E53-Q4HQ4H Pulse (PNP) / pulse (PNP)
Option units E53-CK01 RS-232C
E53-CK03 RS-485
E53-CKB Event input: 1 point
E53-CKF Transfer output (4 to 20 mA)
Model Name Model Specification
E5AK
E5EK
Output units E53-R Relay
E53-S SSR
E53-Q Pulse (NPN) 12 VDC
E53-Q3 Pulse (NPN) 24 VDC
E53-Q4 Pulse (PNP) 24 VDC
E53-C3 Linear (4 to 20 mA)
E53-C3D Linear (0 to 20 mA)
E53-V34 Linear (0 to 10 V)
E53-V35 Linear (0 to 5 V)
Option units E53-AKB Event input
E53-EN01 Communication (RS-232C)
E53-EN02 Communication (RS-422)
E53-EN03 Communication (RS-485)
E53-AKF Transfer output
Heater burnout Optional, CK: loop burnout
Thermocouple input type K, J, T, E, L, U, N, R, S, B, W, PLII
Linear input type mA, 0 to 50 mV
Control mode 2-PID or ON / OFF control
Accuracy 0.3% FS, 1 digit max.
Self-tuning yes
Auto-tuning yes
RS-485 optional
Event input optional
IP rating front panel IP66
Sampling period Temperature input: 250 ms
Linear input: 100 ms
E5@R
Digital process controllers with high
speed and precision, multiple I/O
The E5_R series provides you with high-accuracy inputs
(0.01C for Pt100) and a 50ms sample and control cycle for all four
loops. Its unique disturbance overshoot reduction adjustment
ensures solid, robust control.
96Hx48Wx110D / 96Hx96Wx110D mm
Control mode: ON / OFF or 2-PID
Control output: voltage (puls), linear (mA) and relay valve positioning
Power supply: 100 - 240 VAC or 24 VAC / VDC
Supported by CX-Thermo PC software
Note: - Voltage: specify the power supply specifications (voltage) when ordering. Bold = preferred stock item
- standard = heat and / or cool PID control, valve = valve positioning (relay up / down) (PRR)
- max 2 = 2 loops heat and / or cool or 1 loop cascade, ratio or remote SP
- max 4 = 4 loops heat and / or cool
- 1, 2 or 4 = number of analogue universal input 1 + pot = 1 universal and 1 slide wire feedback from valve
- QC = voltage (pulse) or current (switch), Q = voltage (pulse), C = current, 4R = 4 two pole relay, 2T = two transistor output NPN
Functions Loops Input Output Comms 48x96 mm model Voltage
Analogue Event Control Alarm
standard 1 1 2 2 QC+Q 4R - E5ER-Q4B AC100-240 or DC/AC 24
standard 1 1 2 2 QC+Q 4R RS-485 E5ER-Q43B-FLK AC100-240
standard 1 1 2 4 QC+Q+C+C 4R RS-485 E5ER-QC43B-FLK AC100-240 or DC/AC 24
standard 1 1 6 2 QC+Q 2T RS-485 E5ER-QT3DB-FLK AC100-240
standard max 2 2 4 2 QC+Q 2T RS-485 E5ER-QT3DW-FLK AC100-240 or DC/AC 24
standard 1 1 2 2 C+C 4R - E5ER-C4B AC100-240 or DC/AC 24
standard 1 1 2 2 C+C 4R RS-485 E5ER-C43B-FLK AC100-240
standard 1 1 6 2 C+C 2T RS-485 E5ER-CT3DB-FLK AC100-240
standard max 2 2 4 2 C+C 2T RS-485 E5ER-CT3DW-FLK AC100-240 or DC/AC 24
valve 1 1 + pot 4 2 R+R 2T - E5ER-PRTDF AC100-240 or DC/AC 24
valve 1 1 + pot - 4 R+R+QC+Q 4R RS-485 E5ER-PRQ43F-FLK AC100-240 or DC/AC 24
standard 1 1 2 2 QC+Q 2T DeviceNet E5ER-QTB-DRT AC100-240 or DC/AC 24
standard max 2 2 - 2 QC+Q 2T DeviceNet E5ER-QTW-DRT AC100-240 or DC/AC 24
standard 1 1 2 2 C+C 2T DeviceNet E5ER-CTB-DRT AC100-240 or DC/AC 24
standard max 2 2 - 2 C+C 2T DeviceNet E5ER-CTW-DRT AC100-240 or DC/AC 24
valve 1 1 + pot - 2 R+R 2T DeviceNet E5ER-PRTF-DRT AC100-240 or DC/AC 24
Functions Loops Input Output Comms 96x96 mm Model Voltage
Analogue Event Control Alarm
standard 1 1 2 2 QC+Q 4R - E5AR-Q4B AC100-240 or DC/AC 24
standard 1 1 2 2 QC+Q 4R RS-485 E5AR-Q43B-FLK AC100-240
standard 1 1 6 2 QC+Q 4R RS-485 E5AR-Q43DB-FLK AC100-240
standard 1 1 6 4 QC+Q+C+C 4R RS-485 E5AR-QC43DB-FLK AC100-240 or DC/AC 24
standard max 2 2 4 2 QC+Q 4R RS-485 E5AR-Q43DW-FLK AC100-240
standard max 2 2 4 4 QC+Q+QC+Q 4R RS-485 E5AR-QQ43DW-FLK AC100-240 or DC/AC 24
standard max 4 4 4 4 QC+Q+QC+Q 4R RS-485 E5AR-QQ43DWW-FLK AC100-240
standard 1 1 2 2 C+C 4R - E5AR-C4B AC100-240 or DC/AC 24
standard 1 1 2 2 C+C 4R RS-485 E5AR-C43B-FLK AC100-240
standard 1 1 6 2 C+C 4R RS-485 E5AR-C43DB-FLK AC100-240
standard max 2 2 4 2 C+C 4R RS-485 E5AR-C43DW-FLK AC100-240
standard max 4 4 4 4 C+C+C+C 4R RS-485 E5AR-CC43DWW-FLK AC100-240 or DC/AC 24
valve 1 1 + pot 4 2 R+R 4R - E5AR-PR4DF AC100-240 or DC/AC 24
valve 1 1 + pot 4 4 R+R+QC+Q 4R RS-485 E5AR-PRQ43DF-FLK AC100-240 or DC/AC 24
standard 1 1 2 2 QC+Q 4R DeviceNet E5AR-Q4B-DRT AC100-240 or DC/AC 24
standard 1 1 2 4 QC+Q+C+C 4R DeviceNet E5AR-QC4B-DRT AC100-240 or DC/AC 24
standard max 2 2 - 4 QC+Q+QC+Q 4R DeviceNet E5AR-QQ4W-DRT AC100-240 or DC/AC 24
standard 1 1 2 2 C+C 4R DeviceNet E5AR-C4B-DRT AC100-240 or DC/AC 24
standard max 4 4 - 4 C+C+C+C 4R DeviceNet E5AR-CC4WW-DRT AC100-240 or DC/AC 24
valve 1 1 + pot - 2 R+R 4R DeviceNet E5AR-PR4F-DRT AC100-240 or DC/AC 24
valve 1 1 + pot - 4 R+R+QC+Q 4R DeviceNet E5AR-PRQ4F-DRT AC100-240 or DC/AC 24
Terminal cover for E5AR E53-COV14
Terminal cover for E5ER E53-COV15
E5@R
232
Specifications
Thermocouple input type K, J, T, E, L, U, N, R, S, B, W
RTD input type Pt100
Linear input type mA, V
Control mode 2-PID or ON / OFF control
Accuracy 0.1% FS
Auto-tuning yes
RS-485 optional
Event input optional
IP rating front panel IP66
Size in mm E5ER: 96Hx48Wx110D
E5AR: 96Hx96Wx110D
Temperature controllers - Cat.-No. PRT-SCU11: P05E-EN-01, ES1B: H127-E2-01 233
PRT1-SCU11
OMRON's intelligent PROFIBUS-DP
and Compoway/F gateway
This gateway supports all Compoway/F equipped products, including
temperature controllers, digital panel indicators, etc. It can also be used
for connecting MCW151-E and E5_K series.
Cost-effectively integrates basic instruments into a PROFIBUS-DP
network
Requires no complex protocol conversion writing
Has function blocks for drag-and-drop configuration
Connects up to 15 instruments to a single PROFIBUS point
Ordering information Specifications
ES1B
Achieve low-cost measurements with
an infrared thermosensor
This infrared thermosensor provides an accurate, stable and cost-ef-
fective way to measure the temperature of objects. It behaves just like
a standard K-type thermocouple, which enables it to operate with any
temperature controller or alarm unit.
Cost-effective infrared thermosensor
Contactless, meaning no deterioration, unlike thermocouples
4 temperature ranges available: 10-70C, 60-120C, 115-165C and
140-260C
Response speed 300 ms
Dimensions (unit: mm)
Specifications
Name Model
PROFIBUS remote terminal serial communications unit PRT1-SCU11
Storage temperature -20 C to +75 C
Ambient temperature 0 C to 55 C
Ambient humidity 10 to 90% (non-condensing)
EMC compliance EN 50081-2, EN 61131-2
Power supply +24 VDC (+10% / -15%)
Current consumption 80 mA (typical)
Weight 125 g (typical)
Communication interface RS-485 based PROFIBUS-DP
RS-422A Host link
RS-485 CompoWay/F
RS-232C Peripheral
Port supporting connection to thermotools
Appearance and sensing
characteristics
Specification Model
10 to 70 C ES1B 10-70C
60 to 120 C ES1B 115-165C
155 to 165 C ES1B 140-260C
140 to 260 C ES1B 60-120C
2 dia. 20 dia.
2 mm 20 mm 40 mm 60 mm
40 dia. 60 dia.
14.2 dia.
36.5
17.8
15
6.5
44.5 3,000
ABS resin
PVC-covered
(25C to 70C)
Polyolefin tube
Screw M181.0
Green, output +
White, output
Orange, power +
Shield, power
Item ES1B
Power supply voltage 12 / 24 VDC
Current consumption 20 mA max.
Accuracy 5 C 2% PV or 2 C, whichever is larger
10 C 4% PV or 4 C, whichever is larger
Reproducibility 1% PV or 1 C, whichever is larger
Temperature drift 0.4 C / C max.
Receiver element Thermopile
Response speed Approximately 300 ms at response rate of 63%
Operating temperature -25 C to 70 C (with no icing or condensation)
Allowable ambient humidity 35% to 85%
Size in mm head: 17.8 dia. x 44.5 (screw M18 x 1.0),
cable 3,000
S8VS
without dispIay
S82K S8PS S8TS
ndustrial standard
Standard
power suppIy
SingIe-phase
What type of network supply is it?
Which type of system is required?
Preventive maintenance
What type is required?
High power,
compact
FIexibIe moduIar
power suppIy
(output, capacity)
S8VS
with dispIay
S8VM
Power supplies
With the S8VS Micro size IS everything!
Powerful performance in
compact design
At just 22.5 mm wide Omron's S8VS Micro
series is one of smallest power supplies around,
but it delivers more power per cm
3
than almost
any similar product in its class!
t provides 100% performance (no derating)
right up to its maximum operating temperature.
t offers fexible mounting (DN-rail and
horizontal or vertical panel-mounting) for
convenient installation. And it is available in
15 W and 30 W models, each of which offers
an output voltage choice of 5VDC, 12VDC and
24VDC. A powerful yet cost-effective solution
for reducing cabinet space!
Features at a gIance:
Compact size
No derating
Easy DN-rail mounting
Full range to choose from
234
S8T-DCBU-01 S8T-DCBU-02 S8PE
Three-phase
S8TS buffer block
momentary,
up to 500 ms
S8TS DC battery
back-up up to
several minutes
DC back-up
120-960 W
The power supplies that alert you!
This new single-phase industrial switch mode
power supply series features an undervoltage
alarm that gives a warning in case of failure.
The new S8VM series provide not only a clear
indication that a DC output voltage drop has
occurred, but also indicates the likely cause -
allowing for fast, effective corrective action.
The power supplies come in a broad 5 to 24 V
voltage range, with output powers between 15
and 150 W. Extensions up to 1500 W will be
launched in 2006.
Features at a gIance
Timely, effcient on-site troubleshooting for
optimum quality management
New ultra-compact housing supports cabinet
downsizing
Early-warning system
Easy installation
Broad product range of DC output voltages
from 5 V up to 24 V and in powers from 15 W
to 150 W
S8VM power supplies
235
Table of contents
Selection table 236
Single-phase S8VS 238
S8VM 239
S8TS 240
S8T-DCBU-01/-02 241
S82K 242
Three-phase S8PE 243
236
Selection table
Category
Industrial
standard
With status
monitor
Modular Back-up
S
e
l
e
c
t
i
o
n

c
r
i
t
e
r
i
a
Model
S8VS
S8VS-Bx /
-Ax
S8VM S8TS
Phases Single-phase
Rated voltage 100 to 240 VAC
Voltage 24 V 24 V 5 V 12 V 15 V 24 V 5 V 12 V 24 V 24 V
P
o
w
e
r

[
W
]
3 W
7.5 W
10 W
15 W 3 A 1.3 A 1 A 0.65 A
25 W 5 A
30 W 6 A 2.5 A 2 A 1.3 A 2.5 A
50 W 10 A 4.3 A 3.5 A 2.2 A
60 W 2.5 A 2.5 A 5 A 2.5 A 2.5 A
90 W 3.75 A 3.75 A 7.5 A
100 W 20 A 8.5 A 7 A 4.5 A
120 W 5 A 5 A 10 A 5 A
150 W 27 A 12.5 A 10 A 6.5 A
180 W 7.5 A 7.5 A 7.5 A
240 W 10 A 10 A 10 A
300 W
480 W
600 W
960 W
F
e
a
t
u
r
e
s
Conforms to
EN61000-3-2 A14
with PFC
with PFC
with
PFC
with
PFC
with
PFC
with
PFC
with PFC
with PFC
with PFC
DC back-up
Capacitor back-up
Undervoltage alarm
Overvoltage protection
Overload protection
DIN-rail mounting
Screw mounting
(with bracket)

EMI Class B
UL Class 2 only 60 W only 60 W
N+1 redundancy
Parallel operation
Series operation
Page 238 239 240
Power supplies
237
Category Industrial standard High power
S
e
l
e
c
t
i
o
n

c
r
i
t
e
r
i
a
Model
S82K S8PE
Phases Single-phase 3-phase
Rated voltage 100 / 200 VAC or 100 to 240 VAC 400 - 480 VAC or
200 - 230 VAC
Voltage 5 V 12 V 15 V 24 V 24 V
P
o
w
e
r

[
W
]
3 W 0.6 A 0.25 A 0.2 A 0.13 A
7.5 W 1.5 A 0.6 A 0.5 A 0.3 A
10 W
15 W 2.5 A 1.2 A 0.6 A
25 W
30 W 5 A 2.5 A 1.3 A
50 W 2.1 A
60 W
90 W 3.75 A
100 W 4.2 A
120 W 5 A
150 W
180 W
240 W 10 A
300 W
480 W 20 A
600 W
960 W 40 A
F
e
a
t
u
r
e
s
Conforms to
EN61000-3-2 A14

DC back-up
Capacitor back-up
Undervoltage alarm
Overvoltage protection except 40 A
Overload protection
DIN-rail mounting except 40 A
Screw mounting
(with bracket)
only 40 A
EMI Class B
UL Class 2 except
dual output
N+1 redundancy
Parallel operation only
100 W
Series operation only 90 /

100 W
Page 242 243

Power supplies - Cat.-No. T030-E2-02A 238
S8VS
Power supplies
Compact power supply with
diagnostics and output monitor
function
S8VS contributes to higher productivity and preventative maintenance of
your equipment or machine due to its unique diagnostics feature. Where
production stop is critical, such as in the automotive and semiconductor
industry, the S8VS with display is ideal (60 to 240 W at 24 VDC).
Provides a replacement indication (maintenance forecast monitor)
Provides operation time measurement (total run-time monitor)
Display shows output values: voltage, current or peak current
Non-display models available from 15 to 240 W at 5, 12 and 24 VDC
UL Class 2 (15 - 60 W) and UL Class I div. 2
(15, 30 W); SEMI-F47-0200
Specifications
Power Output voltage Output current Diagnostics
function
Diagnostic alarm
output
Size in mm
(HxWxD)
Type
15 W 5 VDC 2 A (10 W) Undervoltage
alarm indicator
no 85x22.5x96.4 S8VS-01505
12 VDC 1.2 A no S8VS-01512
24 VDC 0.65 A no S8VS-01524
30 W 5 VDC 4 A (20 W) no S8VS-03005
12 VDC 2.5 A no S8VS-03012
24 VDC 1.3 A no S8VS-03024
60 W 24 VDC 2.5 A no no 95x40x108.3 S8VS-06024
90 W 24 VDC 3.75 A no 115x50x121.3 S8VS-09024
120 W 24 VDC 5 A no S8VS-12024
180 W 24 VDC 7.5 A no 115x75x125.3 S8VS-18024
240 W 24 VDC 10 A no 115x100x125.3 S8VS-24024
60 W 24 VDC 2.5 A Maintenance
*1
*1
Maintenance indicates maintenance forecast monitor Bold = preferred stock item
no 95x40x108.3 S8VS-06024A
Total run-time no S8VS-06024B
Alarm output sinking
(NPN)
Alarm output
sourcing (PNP)
*1
yes 115x50x121.3 S8VS-09024A S8VS-09024AP
Total run-time S8VS-09024B S8VS-09024BP
120 W 24 VDC 5 A Maintenance
*1
S8VS-12024A S8VS-12024AP
*1
115x75x125.3 S8VS-18024A S8VS-18024AP
240 W 24 VDC 10 A Maintenance
*1
115x100x125.3 S8VS-24024A S8VS-24024AP
Specification 15 W 30 W 60 W 90 W 120 W 180 W 240 W
Efficiency 77% min. (24 V) 80% min. (24 V) 78% min. 80% min. 80% min. 80% min. 80% min.
Power
factor
0.95 min. 0.95 min. 0.95 min.
Input voltage 100 to 240 VAC (85 to 264 VAC), single-phase
Output
voltage
Voltage
adjustment
10% to 15% (with V. ADJ) min.
Ripple 2% p-p max. (at rated input / output voltage)
Input variation 0.5% max. (at 85 to 264 VAC input, 100% load)
Temperature
influence
0.05% / C max.
Overload protection 105% to 160% of rated load current, voltage drop, automatic reset
Overvoltage protection yes yes yes yes yes yes yes
Input
current
100 V 0.45 A m Ax. 0.9 A m Ax. 1.7 A m Ax. 2.3 A m Ax. 1.9 A m Ax. 2.7 A m Ax. 3.8 A m Ax.
200 V 0.25 A m Ax. 0.6 A m Ax. 1.0 A m Ax. 1.4 A m Ax. 1.1 A m Ax 1.6 A m Ax. 2.0 A m Ax.
230 V 0.19 A
(5 V: 0.14 A)
0.37 A
(5 V: 0.27 A)
0.7 A typ. 0.9 A typ. 0.6 A typ. 0.9 A typ. 1.2 A typ.
Output indicator yes (green) yes (green) yes (green) yes (green) yes (green) yes (green) yes (green)
Weight 160 g 180 g 330 g 490 g 550 g 850 g 1,150 g
Operating temperature -10 C to 60 C -10 C to 60 C
*1
*1
For 30 W model 24 V: no derating, 12 & 5 V: derating beyond 50 C.
-10 C to 60 C, derating beyond 40 C, no icing or condensation
Series operation yes (24 V only) yes yes yes yes yes yes
15 / 30 W 60 W 90 / 120 W
180 W 240 W
Power supplies - Cat.-No. T033-E2-01 239
S8VM
Power supplies
General-purpose, slim power supply
with DC output status monitor
The S8VM is available in a slim housing from 15 to 150 W at 5, 12, 15
and 24 VDC in various configurations. S8VM gives a warning when
abnormalities occur, such as input power failure, overload and under-
voltage, by watching the DC output behaviour to help you to quickly
determine the cause of failure.
Indicates abnormalities on the load side (undervoltage alarm)
Indicates input power failure (undervoltage alarm)
Consistent height in the family for easy cabinet design
300 to 1,500 W models to be released soon
(see S8PS / S82J until then)
EMI Class B, UL Class 1 division 2,
SEMI-F47-0200 (pending)
Note: The indicated sizes are for DIN-rail mounting covered types. Other types will have slightly different dimensions.
Specifications
Power
ratings
Output
voltage
Output
current
Size in mm
(HxWxD)
Open-frame
type
Covered type
DIN-rail
mounting
*1
*1
For open-frame type with front-mounting, remove the 'D' from the ordering number.. Bold = preferred stock item
Front-mounting DIN-rail mounting
Standard type Standard type Undervoltage alarm type Standard type Undervoltage alarm type
Sinking (NPN) Sourcing (PNP) Sinking (NPN) Sourcing (PNP)
15 W 5 V 3 A 84.5x35.1x94.4 S8VM-01505D S8VM-01505C S8VM-01505CD
12 V 1.3 A S8VM-01512D S8VM-01512C S8VM-01512CD
15 V 1 A S8VM-01515D S8VM-01515C S8VM-01515CD
24 V 0.65 A S8VM-01524D S8VM-01524C S8VM-01524A
*2
*2
No output built-in.
S8VM-01524CD S8VM-01524AD
*2
24 V 1.3 A S8VM-03024D S8VM-03024C S8VM-03024A
*2
S8VM-03024CD S8VM-03024AD
*2
24 V 2.2 A S8VM-05024D S8VM-05024C S8VM-05024A S8VM-05024P S8VM-05024CD S8VM-05024AD S8VM-05024PD
150 W 5 V 27 A
(135 W)
84.5x45.6x164.5 S8VM-15005D S8VM-15005C S8VM-15005CD
15 W 30 W 50 W 100 W 150 W
Efficiency 5 V models 75% min. 75% min. 80% min. 81% min. 81% min.
12 V models 78% min. 79% min. 79% min. 81% min. 81% min.
Input voltage 100 to 240 VAC, (85 to 264 VAC), single phase
Output Voltage adjustment 20% with V. ADJ min. (S8VM-@@@24A@ / P@: -10% to 20%)
Ripple 5 V models 3.2% (p-p) max. 3.2% (p-p) max.
12 V models 1.5% (p-p) max. 1.5% (p-p) max.
Input variation 0.4% max.
Temperature influence 0.02% / C max.
Overload protection 105% to 160% of rated load current, voltage drop, automatic reset
Overvoltage protection yes
Output indicator yes (green)
Weight 180 g max. 220 g max. 290 g max. 460 g max. 530 g max.
Series operation yes
Remote sensing function no no no yes yes
S8TS
Power supplies
Industrial-use, modular power supply
for multiple configurations
The S8TS is an expandable power supply; standard units can easily be
snapped together in parallel to provide you with ultimate flexibility.
Expandable up to 4 units, it can deliver a total power of 240 W
at 24 VDC or a multi-output configuration.
Improves system reliability by building up N+1 redundancy
Standard unit; 60 W at 24 VDC, 30 W at 12 VDC and 25 W at 5 VDC
Battery back-up unit protects against power outage
(see accessories)
Buffer unit protects against power glitches and outage
(see accessories)
EMI class B, UL class 2, UL class 1 division 2
Accessories
Specifications
Basic block
Output voltage Output current Screw terminal type Connector terminal type
*1
*1
Attached connectors: 2ESDPLM-05P (for output terminal) and 3ESDPLM-03P (for input terminal) made by DINKLE ENTERPRISE. Bold = preferred stock item
With bus line connectors
*2
*2
One S8T-BUS01 connector and one S8T-BUS02 connector are included as accessories.
Without bus line connectors
*3
*3
Bus line connectors can be ordered separately if necessary.
With bus line connectors
*2
Without bus line connectors
*3
24 V 2.5 A S8TS-06024-E1
*4
*4
Conforms to EMI class B with DC minus terminal ground.
S8TS-06024 S8TS-06024F-E1 S8TS-06024F
12 V 2.5 A S8TS-03012-E1 S8TS-03012 S8TS-03012F-E1 S8TS-03012F
5 V 5 A S8TS-02505 S8TS-02505F
Bus line connector
Type Number of connectors Model number
AC line + DC line bus
(For parallel operation)
1 connector S8T-BUS01
10 connectors
*1
*1
One package contains 10 S8T-BUS01 connectors. Bold = preferred stock item
S8T-BUS11
AC line bus (For series operation
or isolated operation)
1 connector S8T-BUS02
10 connectors
*2
*2
One package contains 10 S8T-BUS02 connectors.
S8T-BUS12
5 V models 24 / 12 V models
Single operation Single operation Parallel operation
Efficiency 62% min. 24 V models: 75%, 12 V models: 70% min.
Power factor 0.8 min. 24 V models: 0.9 min., 12 V models: 0.8 min.
Input voltage 100 to 240 VAC, (85 to 264 VAC), single-phase
Output
voltage
Voltage adjustment 5 V 10% min. 24 V models: 22 to 28 V, 12 V models: 12 V 10% min.
Ripple 2% (p-p) max. 2% (p-p) max. 2% (p-p) max.
Temperature influence 0.05% / C max. (with rated input, 10% to 100% load)
Overcurrent protection 105% to 125% of rated load current, inverted L drop, automatic reset
Overvoltage protection yes yes yes
Output indicator yes (green) yes (green) yes (green)
Weight 450 g max. 450 g max. 450 g max.
Series operation yes yes yes
Parallel operation no yes yes
Power supplies - Cat.-No. S8T-DCBU-01: T027-E2-02, S8T-DCBU-02: T029-E2-01A 241
S8T-DCBU-01/-02
Power supplies
S8T-DCBU-01
The S8T-DCBU-01 battery backup block supplies 24 VDC for a fixed
period of time during AC input outages to considerably improve system
reliability.
Note: The S8TS DC back-up block is for S8TS power supplies only. Bold = preferred stock item
Specifications
Product Input voltage Output voltage Output current Model number
DC back-up block 24 to 28 VDC 24 V 3.7 A / 8 A S8T-DCBU-01
Battery holder S82Y-TS01
Product Input voltage Output voltage Output current Type Model number
Basic block
(use together with the DC
back-up block)
100 to 240 VAC 24 V 2.5 A Screw
terminal type
With bus line connectors S8TS-06024-E1
Without bus line connectors S8TS-06024
Connector
terminal type
With bus line connectors S8TS-06024F-E1
Without bus line connectors S8TS-06024F
Product Back-up time Overcurrent protection
operating point selector
Model number
Battery 8 min. / 3.7 A 5.7 A (typ.) LC-R122R2PG
4 min. / 8.0 A 5.7 A (typ.) 11.7 A (typ.) LC-R123R4PG
Size in mm
S8TS-DCBU-01 120Hx43Wx130D
Battery holder 82Hx185.7Wx222.25D
S8T-DCBU-02
Prevents equipment stoppage, data loss and other problems resulting
from momentary power failures. One S8TS-DCBU-02 buffer block pro-
vides a back-up time of 500 ms at an output current of 2.5 A. Can be
wired to the 24 VDC output from any switch mode power supply.
Accessories
Specifications
Input voltage Output voltage (during back-up operation) Output current Model number
24 VDC (24 to 28 VDC) 22.5 V 2.5 A S8T-DCBU-02
Type Number of connectors Model number
DC bus line connector (for use with S8TS only) 1 connector S8T-BUS03
10 connectors S8T-BUS13
Size in mm
S8TS-DCBU-02 120Hx43Wx120D
S82K
Power supplies
All-purpose, industrial use power
supply
The S82K has set an industrial standard in power supply history.
Available from 3 to 100 W at 5, 12, 15 and 24 VDC.
Indicates abnormalities on the load side (undervoltage alarm)
Parallel operation (100 W models)
12 and 15 VDC output with 7.5 W available
UL Class 2 (90 W), EMI class B
Note: Complies to EN61000-3-2 A14 for all models
Specifications
Power ratings Output voltage Output current Function configuration Size in mm
(HxWxD)
Models
Output Undervoltage
alarm indicator
Undervoltage
alarm output
3 W 5 V 0.6 A Single output yes no 75x37.5x65 S82K-00305
12 V 0.25 A S82K-00312
15 V 0.2 A S82K-00315
24 V 0.13 A S82K-00324
7.5 W 5 V 1.5 A Single output yes no S82K-00705
12 V 0.6 A S82K-00712
15 V 0.5 A S82K-00715
24 V 0.3 A S82K-00724
+V12 / -V12 0.3 A / 0.2 A Dual output S82K-00727
+V15 / -V15 0.2 A / 0.2 A S82K-00728
15 W 5 V 2.5 A Single output yes no 75x45x91 S82K-01505
12 V 1.2 A S82K-01512
24 V 0.6 A S82K-01524
30 W 5 V 5.0 A (25 W) Single output yes no 75x90x91 S82K-03005
12 V 2.5 A S82K-03012
24 V 1.3 A S82K-03024
50 W 24 V 2.1 A Single output yes no 75x145x91 S82K-05024
90 W 24 V 3.75 A yes S82K-09024
S82K-09024-500
*1
*1
Conforms to EMI class B with DC minus terminal ground Bold = preferred stock item
100 W 4.2 A
*2
*2
The output current during parallel operation is 3.78 A.
S82K-10024
Specification Models without PFC Models with PFC
Single output Dual output Single output Single output
3 W 7.5 W 7.5 W 15 W 30 W 50 W 90 W 100 W 90 W 100 W
Efficiency 60% to 80% (varies depending on specification)
Power
factor
100 V 0.95 min.
200 V 0.7 min. 0.95 min.
Input voltage 100 to 240 VAC, single-phase
Output
voltage
Voltage
adjustment
10% (V. ADJ) not
applicable
10% (V.ADJ), -10% to 15% for S82K-030012 / -03024 / -05024
Ripple 2% (p-p max.)
Temperature
influence
0.5% / C max.
Overload protection 105% to 160% of rated load current, inverted L drop, automatic reset
*1
*1
For 7.5 W Dual output 105% to 250% and for 90 W models 101% to 111%
Input
current
max.
100 V 0.15 A 0.25 A 0.45 A 0.9 A 1.3 A 2.5 A 2.5 A
200 V 0.25 A 0.6 A 0.8 A 1.5 A 1.0 A
Output indicator Yes (green)
Weight 150 g 260 g 260 g 380 g 400 g 600 g 1,000 g
Operating temperature -10 C to 60 C with derating from 50 C, 100 W models: -10 C to 50 C, 90 W model derating from 30 C
Series operation yes yes yes yes
Parallel operation yes yes
Models with PFC
S82K-P09024
S82K-P10024
Power supplies - Cat.-No. M044-E2-04 243
S8PE
Power supplies
Slim, 3-phase input power supply
S8PE provides all you need for control panel design. From 5 to 40 A
available.
3-phase input (340 - 576 VAC)
5, 10, 20 and 40 A; 24 VDC output
50 mm wide with 240 W model
UL60950 (CSA22.2-60950), UL508 listing (CSA22.2-14) and CE
Conforms to EN61000-3-2
Specifications
Power ratings Output voltage Output current Size in mm (HxWxD) With front-mounting bracket With DIN-rail mounting bracket
120 W 24 V 5 A 125x50x140 S8PE-F12024CD
240 W 24 V 10 A 170x50x140 S8PE-F24024CD
480 W 24 V 20 A 133x256x80 S8PE-F48024CD
960 W 24 V 40 A 275x246x80 S8PE-F96024C
5 A 10 A 20 A 40 A
Efficiency V
in
= 400 VAC 85 % 88 % 87 % 90 %
V
in
= 480 VAC 84 % 88 % 87 % 90 %
Voltage range 340 to 766 VAC, 3-phase
Output
voltage
Voltage
adjustment
22.5 to 26.4 VDC min.
Ripple 200 mV max.
Input
variation
0.5% max.
Temperature
influence
0.01% / C
Overload protection yes
Overvoltage protection yes
Output indicator yes (green) yes (green) yes (green) yes (green)
Weight 750 g 1.0 kg 2.65 kg 4.75 kg
Series operation yes (for 2 units)
Parallel operation yes (for 2 units)
LISTED
Which size is required?
DN-rail
AnaIogue
Which mounting method is required?
H2C H3DS H3DE H3YN H3CR
17.5 mm 22.5 mm
Which type of timer is needed?
Plug / front
Motor timer
Timers
With over 70 years experience in timers, Omron
knows exactly how to satisfy every timer function
need. Our range includes motor timers, electronic
timers, standard and digital timers, all available in
a wide variety of housing and mounting methods to
suit any customer requirement.
An extensive range of motor timers, electronic
timers and digital timers
A wide range of timer function modes
Conformance to all safety standards
A wide range of housing varieties to suit every
application
Timer range from 0.001 seconds to 9999 hours
Relay outputs, contact and transistor outputs
244
*Please see page XX
in the counter section
DigitaI
48 x 24 mm 48 x 48 mm
H8GN* H5CX
The H5CX series is a complete range of
digital timers offering multiple time ranges and
covering basically all timing functions, including
real twin-timer function, memory function, an
intuitive way of programming, and a two-colour,
back-lit negative transmissive LCD display.
Every model features a crystal-clear display
for excellent visibility in all lighting conditions,
dust- and water-proof front casing (P66) that
guarantees top performance under adverse
conditions, and extensive functionality in its
class.
n addition, each unit in this series has the
same "look and feel with its uniform display
design, the same front-panel rocker-keys
for easy set-up and operation, and the same
intuitive way of programming.
H5CX series designed to your specifications
245
Table of contents
Selection table 246
Analogue solid state timers H3DS 248
H3DE 249
H3YN 250
H3CR 251
Digital timers H5CX 252
Motor timers H2C 253
246
Selection table
Category Analogue solid state timer
S
e
l
e
c
t
i
o
n

c
r
i
t
e
r
i
a
Model H3DS-M H3DS-S H3DS-A H3DS-F H3DS-G H3DS-X H3DE-M H3DE-S H3DE-F H3DE-G H3DE-H
Mounting DIN-rail
Size 17.5 mm 22.5 mm
Type Multi-functional Twin
timer
Star-delta Two-
wired
Multi-functional Twin
timer
Star-
delta
Power
OFF-delay
C
o
n
t
a
c
t

c
o
n
f
i
g
u
r
a
t
i
o
n
Time limit
Instantaneous
Programmable
contacts

14 pins
11 pins
8 pins
Screw terminals
Screw-less clamp
terminals

Screw-less clamp
sockets
I
n
p
u
t
sVoltage input
O
u
t
p
u
t
s
Transistor
Relay
SCR
Relay
output
type
SPDT (2X)
SPST-NO (2X)
DPDT
4PDT
F
e
a
t
u
r
e
s
Time
range
Total time
range
0.1 s to
120 h
1 s to
120 h
2 s to
120 h
0.1 s to
120 h
1 s to
120 h
0.1 s to
120 h
0.1 s to
120 h
0.1 s to
120 h
0.1 s to
120 h
1 s to
120 h
0.1 s to
120 h
Number of
sub
ranges
7 7 7 6 2 7 8 8 8 2 2 (model
dependent)
Supply voltage 24 to 230
VAC or
24 to 48
VDC
24 to 230
VAC or
24 to 48
VDC
24 to 230
VAC or
24 to 48
VDC
24 to 230
VAC or
24 to 48
VDC
24 to 230
VAC or
24 to 48
VDC
24 to 230
VAC or
24 to 48
VDC
24 to 230
VAC or
12 VDC
24 to 230
VAC / DC
or 12 VDC
24 to 230
VAC / DC
24 to 230
VAC / DC
100 to 120
VAC, 200 to
230 VAC,
24 VAC /
DC,
48 VAC /
DC
Number of
operating modes
8 4 1 2 1 1 8 4 1 1 1
F
u
n
c
t
i
o
n
s
ON-delay
Flicker OFF start
Flicker ON start
Signal
ON- / OFF-delay

Signal OFF-delay
Interval (signal or
power start)

One-shot output
(ON-delay)

ON-delay (fixed)
Independent
ON / OFF time
Star-delta
R
e
-
m
a
r
k
sTransistor
Page 248 249
Timers
247
Category Analogue solid state timer Digital timer Motor timer
S
e
l
e
c
t
i
o
n

c
r
i
t
e
r
i
a
Model H3YN H3CR-A H3CR-F H3CR-G H3CR-H H5CX H8GN H2C
Mounting Socket / on panel
Size 21.5 mm 1/16 DIN 1/32 DIN 1/16 DIN
Type Miniature Multi-
functional
Twin timer Star-delta Power
OFF-delay
Multi-
functional
Preset
counter /
timer
Motor timer
C
o
n
t
a
c
t

c
o
n
f
i
g
u
r
a
t
i
o
n
Time limit
Instantaneous
Programmable
contacts

14 pins
11 pins
8 pins
Screw terminals
Screw-less clamp
terminals
Screw-less clamp
sockets
I
n
p
u
t
sVoltage input
O
u
t
p
u
t
s
Transistor
Relay
SCR
Relay
output
type
SPDT
SPST-NO (2X)
DPDT
4PDT
F
e
a
t
u
r
e
s
Time
range
Total time
range
0.1 s to 10 h
(model
dependent)
0.05 s to
300 h, 0.1 s to
600 h (model
dependent)
0.05 s to 30 h
or 1.2 s to
300 h (model
dependent)
0.5 s to 120 s 0.05 s to 12 s,
1.2 s to
12 min
0.001 s to
9999 h
(configurable)
0.000 s to
9999 h
(configurable)
0.2 s to 30 h
Number of
sub
ranges
2 9 14 4 4 10 9 15
Supply voltage 24, 100 to
120, 200 to
230 VAC,
12, 23, 48,
100 to 110,
125 VDC
100 to 240
VAC, 100 to
125 VDC,
24 to 48 VAC,
12 to 48 VDC
100 to 240
VAC,
12 VDC,
24 VAC / DC,
48 to 125
VDC
100 to 120
VAC, 200 to
240 VAC
100 to 120
VAC, 200 to
240 VAC,
24 VAC / DC,
48 VDC, 100
to 125 VDC
100 to 240
VAC,
24 VAC,
12 to 24 VDC
24 VDC 24, 48, 100,
110, 115,
120, 200,
220, 240
VAC
Number of
operating modes
4 6 (model
dependent)
2 1 12 6 2
F
u
n
c
t
i
o
n
s
ON-delay
Flicker OFF start
Flicker ON start
Signal
ON- / OFF-delay

Signal OFF-delay
Interval (signal or
power start)

One-shot output
(ON-delay)

ON-delay (fixed)
Independent
ON / OFF time

Star-delta
R
e
-
m
a
r
k
sTransistor
Page 250 251 252 261 253
Timers - Cat.-No. L098-E2-05 248
H3DS
Timers
DIN-rail mounted, standard 17.5 mm
width solid state timer range
This broad range of timers includes many functionalities and has a wide
AC / DC power supply range. Models with screwless clamp connection
available.
17.5 mm width, modular 45 mm
DIN-rail mounting
24 - 48 VDC and 24 - 230 VAC
0.1 s to 120 h, 7 ranges
Specifications
Type Supply voltage Control output Time setting
range
Operating modes Model
Screw
terminal type
Screw-less
clamp type
Multi-functional timer 24 to 230 VAC
(50 / 60 Hz) /
24 to 48 VDC
SPDT 0.1 s -120 h ON-delay, flicker OFF start, flicker ON start,
signal ON / OFF-delay, signal OFF-delay,
interval, signal ON / OFF-delay, one-shot
H3DS-ML H3DS-MLC
Standard timer ON-delay, flicker ON start, interval, one-shot H3DS-SL H3DS-SLC
Single function timer ON-delay H3DS-AL H3DS-ALC
Twin timer Relay SPDT 0.1 s - 12 h Flicker OFF start, flicker ON start H3DS-FL H3DS-FLC
Star-delta timer 2x Relay SPST-NO 1 s - 120 s Star-delta H3DS-GL H3DS-GLC
Two-wired timer 24 to 230 VAC /
VDC (50 / 60 Hz)
SCR output 0.1 s - 120 h ON-delay H3DS-XL H3DS-XLC
Terminal block Screw terminal type: clamps two 2.5 mm
2
max. bar terminals without sleeves
Screw-less clamp type: clamps two 1.5 mm
2
Mounting method DIN-rail mounting
Power reset Minimum power-off time: 0.1 s, 0.5 s for H3DS-G
Reset voltage 2.4 VAC / VDC max., 1.0 VAC / VDC max. for H3DS-X
Voltage input Max. permissible capacitance between input lines (terminals B1 and A2): 2,000 pF
Load connectable in parallel with inputs (terminals B1 and A1)
H-level: 20.4 to 253 VAC / 20.4 to 52.8 VDC
L-level: 0 to 2.4 VAC / VDC
Control output Contact output: 5 A at 250 VAC with resistive load (cos = 1)
5 A at 30 VDC with resistive load (cos = 1)
Ambient temperature Operating: -10 C to 55 C (with no icing)
Storage: -25 C to 65 C (with no icing)
Accuracy of operating time 1% max. of FS (1% 10 ms max. at 1.2 s range)
Setting error 10% 50 ms max. of FS
Influence of voltage 0.7% max. of FS (0.7% 10 ms max. at 1.2 s range)
Influence of temperature 5% max. of FS (5% 10 ms max. at 1.2 s range)
Life expectancy (not H3DS-X) Mechanical: 10 million operations min. (under no load at 1,800 operations / h)
Electrical: 100,000 operations min. (5 A at 250 VAC, resistive load at 360 operations / h)
H3DE
Timers
DIN-rail mounted, standard 22.5 mm
width solid state timer range
The H3DE series of timers provides a wide AC / DC power supply and
time range to reduce the number of items.
79Hx22.5Wx100D mm
DIN-rail mounting
24 - 230 VAC / VDC (except -H)
Wide time setting range: 0.10 s - 120 h (except -H and -G), 8 ranges
Specifications
Type Supply voltage Control output Time setting range Operating modes Model
Multi-functional
standard timers
12 VDC DPDT 0.1 s - 120 h ON-delay, flicker OFF start, flicker ON start,
signal ON / OFF-delay, signal OFF-delay,
interval, signal ON / OFF-delay, one-shot
H3DE-M2 DC12
*1
*1
One output can be set to instantaneous. Bold = preferred stock item
24 to 230 VAC / VDC SPDT H3DE-M1 AC/DC24-230
DPDT H3DE-M2 AC/DC24-230
*1
SPDT ON-delay, flicker ON start, interval,
one-shot
H3DE-S1 AC/DC24-230
DPDT H3DE-S2 AC/DC24-230
*1
Twin timer SPDT 0.1 s - 12 h Flicker OFF start, flicker ON start H3DE-F AC/DC24-230
Star-delta timer 2x SPDT 1 - 20 m Star-delta H3DE-G AC/DC24-230
Power OFF-delay
timer
24 VAC / VDC SPDT 1 - 120 s Signal OFF-delay H3DE-H AC/DC24 L
0.1 - 12 s H3DE-H AC/DC24 S
48 VAC / VDC 1 - 120 s H3DE-H AC/DC48 L
0.1 - 12 s H3DE-H AC/DC48 S
100 to 120 VAC 1 - 120 s H3DE-H AC100-120 L
0.1 - 12 s H3DE-H AC100-120 S
200 to 230 VAC 1 - 120 s H3DE-H AC200-230 L
0.1 - 12 s H3DE-H AC200-230 S
Terminal block Clamps two 2.5 mm
2
Mounting method DIN-rail mounting
Power reset Minimum power-off time: H3DE-M/S, H3DE-F: 0.1 s, H3DE-G: 0.5 s
Reset voltage 2.4 VAC / VDC max. (not for H3DE-H)
Voltage input (H3DE-M / -S) Max. permissible capacitance between input lines (terminals B1 and A2): 2,000 pF
Load connectable in parallel with inputs (terminals B1 and A2)
H-level: 20.4 to 253 VAC / VDC, L-level: 0 to 2.4 VAC / VDC
Control output Contact output: 5 A at 250 VAC with resistive load (cos = 1), 5 A at 30 VDC with resistive load (cos = 1)
Ambient temperature Operating: -10 C to 55 C (with no icing), storage: -25 C to 65 C (with no icing)
Accuracy of operating time 1% max. of FS (1% 10 ms max. at 1.2 s range)
Setting error 10% 0.05 s max. of FS
Signal input time 50 ms min.
Influence of voltage 0.5% max. of FS
Influence of temperature 2% max. of FS
Contact material AGNi+gold plating
Life expectancy Mechanical: 10 million operations min. (under no load at 1,800 operations / h)
Electrical: 100,000 operations min. (5 A at 250 VAC, resistive load at 360 operations / h)
Degree of protection IP30 (terminal block: IP20)
H3YN
Timers
Miniature timer with multiple time
ranges and multiple operating modes
H3YN features 4 multi-operating modes: ON-delay, interval, flicker
ON start and flicker OFF start.
28Hx21.5Wx52.6D mm
Plug-in
All supply voltages available
0.1 s to 10 h
DPDT (5 A) or 4PDT (3 A)
Accessories
Connecting socket Hold-down clips
Specifications
Supply voltage Functions Time-limit contact Short-time range model (0.1 s to 10 min) Long-time range model (0.1 min to 10 h)
12 VDC ON-delay
Interval
Flicker ON
Flicker OFF
DPDT H3YN-2 12DC H3YN-21 12DC
24 VAC H3YN-2 24AC H3YN-21 24AC
24 VDC H3YN-2 24DC H3YN-21 24DC
100 - 120 VAC H3YN-2 100-120AC H3YN-21 100-120AC
200 - 230 VAC H3YN-2 200-230AC H3YN-21 200-230AC
12 VDC 4PDT H3YN-4 12DC H3YN-41 12DC
24 VAC H3YN-4 24AC H3YN-41 24AC
24 VDC H3YN-4 24DC H3YN-41 24DC
100 - 120 VAC H3YN-4 100-120AC H3YN-41 100-120AC
200 - 230 VAC H3YN-4 200-230AC H3YN-41 200-230AC
Timer DIN-rail mounting /
front-connecting socket
Back-connecting
socket
PCB terminal
H3YN-2 / -21 PYF08A, PYF08A-N, PYF08A-E PY08-02
H3YN-4 / -41 PYF14A, PYF14A-N, PYF14A-E PY14-02
Applicable socket Model
PYF08A, PYF08A-N, PYF08A-E,
PYF14A, PYF14A-N, PYF14A-E
Y92H-3 (pair)
PY08, PY08-02, PY14-02 Y92H-4
Item H3YN-2 / -4 H3YN-21 / -41
Time ranges 0.1 s to 10 min (1 s, 10 s, 1 min, or 10 min max. selectable) 0.1 min to 10 h (1 min, 10 min, 1 h, or 10 h max. selectable)
Rated supply voltage 24, 100 to 120, 200 to 230 VAC (50 / 60 Hz)
12, 24, 48, 100 to 110, 125 VDC
Pin type Plug-in
Operating mode ON-delay, interval, flicker OFF start, or flicker ON start (selectable with DIP switch)
Operating voltage range 85% to 110% of rated supply voltage (12 VDC: 90% to 110% of rated supply voltage)
Reset voltage 10% min. of rated supply voltage
Control outputs DPDT: 5 A at 250 VAC, resistive load (cos = 1), 4PDT: 3 A at 250 VAC, resistive load (cos = 1)
Accuracy of operating time 1% FS max. (1 s range: 1% 10 ms max.)
Setting error 10% 50 ms FS max.
Reset time Min. power-opening time: 0.1 s max. (including halfway reset)
Influence of voltage 2% FS max.
Influence of temperature 2% FS max.
Ambient temperature Operating: -10 C to 50 C (with no icing), storage: -25 C to 65 C (with no icing)
Size in mm 28Hx21.5Wx52.6D
H3CR
Timers
DIN 48x48 mm multi-functional
timer series
This elaborate range of solid state timers provides you with a
multi-functional timer, twin timer, star-delta timer and a power
OFF-delay timer.
48x48 mm front-panel / plug-in
High- / low-voltage models (except -H and -G)
0.05 s to 300 h (except -H and -G)
DPDT, 5 A at 250 VAC
Transistor 100 mA at 30 VDC
Accessories
Specifications
Output Number of pins Supply voltage Time range Operating mode Model
Relay DPDT 11 100 to 240 VAC / 100 to 125 VDC 0.05 s to 300 h ON-delay, flicker OFF start,
flicker ON start, signal ON /
OFF-delay, signal OFF-delay,
interval
H3CR-A 100-240AC/100-125DC
24 to 48 VAC / 12 to 48 VDC H3CR-A 24-48AC/12-48DC
Transistor 24 to 48 VAC / 12 to 48 VDC 0.05 s to 300 h H3CR-AS 24-48AC/12-48DC
Relay DPDT 8 100 to 240 VAC / 100 to 125 VDC 0.05 s to 300 h ON-delay, flicker ON start,
interval, one-shot
H3CR-A8 100-240AC/100-125DC
24 to 48 VAC / 12 to 48 VDC H3CR-A8 24-48AC/12-48DC
Transistor 24 to 48 VAC / 12 to 48 VDC 0.05 s to 300 h H3CR-A8S 24-48AC/12-48DC
Relay SPDT 100 to 240 VAC / 100 to 125 VDC H3CR-A8E 100-240AC/100-125DC
24 to 48 VAC / 12 to 48 VDC H3CR-A8E 24-48AC/DC
Relay DPDT 11 100 to 240 VAC 0.05 s to 30 h Flicker OFF start H3CR-F 100-240AC
24 VAC / VDC H3CR-F 24AC/DC
8 100 to 240 VAC H3CR-F8 100-240AC
24 VAC / VDC H3CR-F8 24AC/DC
11 100 to 240 VAC 0.05 s to 30 h Flicker ON start H3CR-FN 100-240AC
24 VAC / VDC H3CR-FN 24AC/DC
8 100 to 240 VAC H3CR-F8N 100-240AC
24 VAC / VDC H3CR-F8N 24AC/DC
Time-limit contact and
instantaneous contact
100 to 120 VAC H3CR-G8EL 100-120AC
200 to 240 VAC H3CR-G8EL 200-240AC
DPDT 8 100 to 120 VAC 0.05 to 12 s Signal OFF-delay H3CR-H8LS 100-120AC
200 to 240 VAC H3CR-H8LS 200-240AC
24 VAC / VDC H3CR-H8LS 24AC/DC
100 to 120 VAC 0.05 to 12 m H3CR-H8LM 100-120AC
200 to 240 VAC H3CR-H8LM 200-240AC
24 VAC / VDC H3CR-H8LM 24AC/DC
Name / specifications Model
Flush-mounting adapter Y92F-30
Protective cover Y92A-48B
Front connecting socket 8-pin, finger-safe type, DIN-rail P2CF-08-E
11-pin, finger-safe type P2CF-11-E
Back connecting socket 8-pin P3G-08
11-pin P3GA-11
Time setting ring Setting a specific time Y92S-27
Limiting the setting range Y92S-28
Panel cover Light grey (5Y7/1) Y92P-48GL
Black (N1.5) Y92P-48GB
Accuracy of operating time 0.2% FS max.
(0.2% 10 ms max. in a range of 1.2 s)
Influence of voltage 0.2% FS max.
(0.2% 10 ms max. in a range of 1.2 s)
Influence of temperature 1% FS max.
(1% 10 ms max. in a range of 1.2 s)
Ambient temperature Operating: -10 C to 55 C (with no icing),
storage: -25 C to 65 C (with no icing)
Life expectancy Mechanical: 20,000,000 operations min.
(under no load at 1,800 operations / h)
Electrical: 100,000 operations min. (5 A at 250 VAC,
resistive load at 1,800 operations / h)
Size in mm 48Hx48Wx66.6D (H3CR-A, -F),
48Hx48Wx78D (H3CR-G, -H)
Setting error 5% FS 50 ms
Degree of protection IP40 (panel surface)
Weight Approx. 90 g
H5CX
Timers
The most complete digital standard
timer on the market
H5CX offers you the most complete series of products on the market
today. Based on extensive customer research, these new timers have
been designed with added-value features that users both need and
appreciate.
48Hx48Wx64D to 100 mm
Two-colour display value, red or green
Front-mounting/plug-in
0.001 s to 9999 h, 10 ranges
Input NPN, PNP and contact
Accessories
Specifications
Output type Supply voltage Functions External connection Size in mm
(HxWxD)
Socket depth
(mm)
Model
Contact output 100 to 240 VAC A: Signal ON-delay
A-1: Signal ON-delay 2
A-2: Power ON-delay 1
A-3: Power ON-delay 2
b: Repeat cycle 1
b-1: Repeat cycle 2
d: Signal OFF-delay
E: Interval
F: Cumulative
Z: ON / OFF-duty adjustable flicker
toff: Twin timer OFF start
ton: Twin timer ON start
Screw terminals 48x48x100 0 H5CX-A
12 to 24 VDC / 24 VAC 48x48x64 H5CX-AD
Transistor output 100 to 240 VAC 48x48x100 H5CX-AS
12 to 24 VDC / 24 VAC 48x48x64 H5CX-ASD
Contact output 100 to 240 VAC 11-pin socket 48x48x72.5 14.4 H5CX-A11
12 to 24 VDC / 24 VAC 48x48x63.7 H5CX-A11D
Transistor output 100 to 240 VAC 48x48x72.5 H5CX-A11S
12 to 24 VDC / 24 VAC 48x48x63.7 H5CX-A11SD
Contact output 100 to 240 VAC 8-pin socket 48x48x63.7 14.3 H5CX-L8
12 to 24 VDC / 24 VAC H5CX-L8D
Transistor output 100 to 240 VAC H5CX-L8S
12 to 24 VDC / 24 VAC H5CX-L8SD
Name Model
Waterproof packing Y92S-29
Front-connecting socket 8-pin, finger safe type P2CF-08-E
11-pin, finger safe type P2CF-11-E
Back-connecting socket 8-pin P3G-08
11-pin P3GA-11
Hard cover Y92A-48
Soft cover Y92A-48F1
Item H5CX-A H5CX-A11 H5CX-L8
Display 7-segment, negative transmissive LCD
Present value: 11.5 mm-high characters
red or green (programmable) red
Set value: 6-mm-high characters, green
Digits 4 digits
Total time range 0.001 s to 9,999 h (configurable)
Timer mode Elapsed time (Up), remaining time (Down) (selectable)
Input signals Signal, reset, gate Signal, reset
Key protection Yes
Memory backup EEPROM (overwrites: 100,000 times min.) that can store data for 10 years min.
Ambient temperature Operating: -10 C to 55 C (no icing or condensation), side-by-side mounting: -10 C to 50 C
Case color Black (N1.5)
H2C
Timers
DIN-sized (48x48 mm) motor timer
with variable time ranges
This motor timer series provides you with many features, such as
ON-delay, time indicator, moving pointer and synchronous motor.
Moreover, the LED indicator shows the time operation, time range and
the rated voltage.
DIN-sized 48x48 mm
Front-panel / plug-in / DIN-rail
All supply voltages available
0.2 s to 30 h
SPDT, 6A at 250 VAC
Note: Other voltages available on request Bold = preferred stock item
Accessories
Specifications
Operation / resetting system Internal connection Terminal Time-limit contact Instantaneous contact Time range code Model
Time-limit operation / electric
resetting
Separate motor and
clutch connection
11-pin socket SPDT SPDT 1.25 s - 30 h
in 5 ranges
H2C-RSA 110AC
H2C-RSA 220AC
H2C-RSA 24AC
0.2 s - 6 h
in 5 ranges
H2C-RSB 110AC
H2C-RSB 220AC
H2C-RSB 24AC
0.5 s - 12 h
in 5 ranges
H2C-RSC 110AC
H2C-RSC 220AC
H2C-RSC 24AC
Time-limit operation /
self-resetting
Separate motor and
clutch connection
11-pin socket SPDT SPDT 1.25 s - 30 h
in 5 ranges
H2C-SA 110AC
H2C-SA 220AC
H2C-SA 24AC
0.2 s - 6 h
in 5 ranges
H2C-SB 110AC
H2C-SB 220AC
H2C-SB 24AC
0.5 s - 12 h
in 5 ranges
H2C-SC 110AC
H2C-SC 220AC
H2C-SC 24AC
DIN-rail mounting /
front-connecting socket
Back-connecting socket 8-pin, screw terminal P3G-08
11-pin P3GA-11
Hold-down clip (pair) For PL08 and PL11 sockets Y92H-1
For PF085A socket Y92H-2
Flush mounting adapter Y92F-30
Time setting ring Y92A-Y1
Reset voltage 10% max. of rated supply voltage
Reset time Min. power-opening time: 0.5 s,
min. pulse width: 0.5 s
Control outputs 6 A at 250 VAC, resistive load (cos = 1)
Mounting method Flush mounting (except for H2C-F / -FR models),
surface-mounting, DIN-rail mounting
Electrical: 500,000 operations min.
Motor life expectancy 20,000 h
Accuracy of operating
time
0.5% FS max.
(1% max. at 0.2 to 6 s for the time range code B or
at 0.5 to 12 s for the time range code C)
Setting error 2% FS max.
Reset time 0.5 s max.
Influence of voltage 1% FS max.
Influence of
temperature
2% FS max.
Ambient temperature Operating: -10 C to 50 C
Case color Light grey (Munsell 5Y7/1)
Degree of protection IP40 (panel surface)
Size in mm 48Hx48Wx77.5D
H7CX
H8GN
counter / timer
48 x 24 mm
(1/32 DN)
48 x 48 mm
(1/16 DN)
Which type of application?
H7EC H7ET H7ER
48 x 24 mm
(1/32 DN)
Timer
What is the type of counting application?
Totalising
Pre-set counter
time count
TotaIising
Speed
Counters
With over three decades in the counter
market, Omron can provide a solution to every
measurement process requirement, including total
counting, timing, pre-set counting and specifc cam
positioning applications.
Full range of battery-powered counters for
total-, timing- and speed counting
Pre-set version has highly visible
colour-change feature
Relay output and transistor output for
pre-set counters
Models available with communication capability
Conform to all relevant safety standards
LCD negative transmission back-lit display
in most models
254
H8PS
96 x 96 mm
(1/4 DN)
Cam positioner
The H7CX series offers the ultimate in versatility
and intuitive programming. With a display
choice of up to six digits the H7CX offers
many added-value features, making it ideal for
multiple uses.
Every model features a crystal-clear display
for excellent visibility in all lighting conditions,
dust- and water-proof front casing (P66) that
guarantees top performance under adverse
conditions, and extensive functionality in its
class. n addition, each unit in this series has
the same "look and feel with its uniform display
design, the same front-panel rocker-keys
for easy set-up and operation, and the same
intuitive way of programming.
H7CX series multi-functional pre-set counter
255
Table of contents
Selection table 256
Totalisers H7EC 258
H7ET 259
H7ER 260
Pre-set counters H8GN 261
H7CX 262
Cam positioners H8PS 263
256
Selection table
Category Self-powered total Self-powered timer Self-powered tachometer
S
e
l
e
c
t
i
o
n

c
r
i
t
e
r
i
a
Model H7EC H7ET H7ER
Display LCD
Size 1/32 DIN
O
u
t
p
u
t
s
Control outputs
2 stage
Total
Time
Preset
Batch
Dual
Tachometer
I
n
p
u
t
sControl inputs No-voltage, PNP / NPN, DC-voltage,
AC / DC multi-voltage
No-voltage, PNP / NPN, DC-voltage,
AC / DC multi-voltage
No-voltage,
PNP / NPN
F
e
a
t
u
r
e
s
Dual operation
Number of digits 8 7 4 or 5
NPN / PNP switch
Back-lit
External reset
Manual reset
Number of banks
Built-in sensor power supply
IP rating IP66 IP66 IP66
T
e
r
m
i
n
a
l
sScrew terminals
PCB terminals
11-pin socket
S
u
p
p
l
y

v
o
l
t
a
g
e100 to 240 VAC
12 to 24 VDC
24 VDC
Comms
F
u
n
c
t
i
o
n
s
Up
Down
Up / down
Reversible
Speed 0 to 30 Hz or 0 to 1 kHz 1 or 10 kHz
Counting range 0 to 99999999 0.0 h to 999999.9 h <-->
0.0 h to 3999 d 23.9 h or
0 s to 999 h 59 min 59 s <-->
0.0 min to 9999 h 59.9 min
1000 s
-1
or 1000 min
-1
; 1000 s
-1
or
1000 min
-1
<--> 10000 min
-1
C
o
l
o
u
rBeige
Black
Page 258 259 260
Counters
257
Counter type
Pre-set
counter / timer
Pre-set counter Cam positioner
S
e
l
e
c
t
i
o
n

c
r
i
t
e
r
i
a
Model H8GN H7CX H8PS
Display LCD negative transmissive LCD
Size 1/32 DIN 1/16 DIN 1/4 DIN
O
u
t
p
u
t
s
Control outputs 1 relay (SPDT) 1 relay (SPDT), transistor NPN or PNP, cam outputs (8 lines),
run out, tachometer
5 stage
Total
Time
Preset
Batch
Dual
Tachometer
I
n
p
u
t
sControl inputs No-voltage No-voltage,
PNP / NPN
Encoder
F
e
a
t
u
r
e
s
Dual operation
Number of digits PV: 4, SV: 4 PV: 4, SV: 4
or PV: 6, SV: 6
7
NPN / PNP switch
Back-lit
External reset
Manual reset
Number of banks 4
Built-in sensor power supply
IP rating IP66 IP66 IP50
T
e
r
m
i
n
a
l
sScrew terminals
PCB terminals
11-pin socket
S
u
p
p
l
y

v
o
l
t
a
g
e100 to 240 VAC
12 to 24 VDC
24 VDC
Comms
F
u
n
c
t
i
o
n
s
Up
Down
Up / down
Reversible
Speed 0 to 30 Hz or 0 to 5 kHz 0 to 30 Hz or 0 to 5 kHz
Counting range -1999 to 9999 -999 to 9999 or -99999 to 999999
C
o
l
o
u
rBeige
Black
Page 261 262 263
Counters - Cat.-No. M064-E2-03 258
H7EC
Counters
Self-powered LCD totaliser
The H7E series is available with large display with 8.6 mm character
height. It includes models with backlight for improved visibility in dimly
lit places. The H7E family includes total counters, time counters,
tachometers and PCB-mounted counters.
24Hx48Wx48.5D mm
8 digits, 8.6 mm character height
Black or light-grey housing
Dual input speed: 30 Hz <-> 1 kHz
Short body: all models have a depth of 48.5 mm
Specifications
Count input Max. counting speed Display Model
Light grey body Black body
No-voltage 30 Hz <-> 1 kHz (switchable) 7-segment LCD H7EC-N H7EC-N-B
PNP / NPN universal DC
voltage input
30 Hz <-> 1 kHz (switchable) 7-segment LCD H7EC-NV H7EC-NV-B
7-segment LCD with backlight H7EC-NV-H H7EC-NV-BH
AC / DC multi-voltage input 20 Hz 7-segment LCD H7EC-NFV H7EC-NFV-B
Item H7EC-NV- / H7EC-NV-H H7EC-NFV- H7EC-N-
Operating mode Up type
Mounting method Flush mounting
External connections Screw terminals, optional wire-wrap terminals
Number of digits 8
Display 7-segment LCD with or without backlight, zero suppression (character height: 8.6 mm)
Max. counting speed 30 Hz / 1 kHz 20 Hz 30 Hz / 1 kHz
Case color Light grey or black (-B models)
Attachment Waterproof packing, flush mounting bracket
Supply voltage Backlight model: 24 VDC (0.3 W max.)
(only for backlight)
No-backlight model: not required
(powered by built-in battery)
Not required (powered by built-in battery)
Count input High (logic) level: 4.5 to 30 VDC
Low (logic) level: 0 to 2 VDC
(input impedance: approx. 4.7 k)
High (logic) level:
24 to 240 VAC / VDC, 50 / 60 Hz
Low (logic) level:
0 to 2.4 VAC / VDC, 50 / 60 Hz
No voltage input
Maximum short-circuit impedance:
10 k max.
Short-circuit residual voltage: 0.5 V max.
Minimum open impedance: 750 k min.
Reset input No voltage input
10 k max.
Minimum signal width 20 Hz: 25 ms, 30 Hz: 16.7 ms, 1 KHz: 0.5 ms
Reset system External reset and manual reset: minimum signal width of 20 ms
Ambient temperature Operating: -10 C to 55 C (with no condensation or icing), storage: -25 C to 65 C (with no condensation or icing)
Degree of protection Front-panel: IP66, NEMA4, terminal block: IP20
Battery life (reference) 7 years min. with continuous input at 25 C (lithium battery)
H7ET
Counters
Self-powered time counter
24Hx48Wx48.5D mm
Dual time range 999999.9h <-> 3999d23.9h or
999h59m59s <-> 9999h59.9m
Specifications
Timer input Display Time range
999999.9h <-> 3999d23.9h (switchable) 999999.9h <-> 3999d23.9h (switchable)
Light grey body Black body Light grey body Black body
No-voltage input 7-segment LCD H7ET-N H7ET-N-B H7ET-N1 H7ET-N1-B
PNP / NPN universal
DC voltage input
7-segment LCD H7ET-NV H7ET-NV-B H7ET-NV1 H7ET-NV1-B
7-segment LCD with backlight H7ET-NV-H H7ET-NV-BH H7ET-NV1-H H7ET-NV1-BH
AC / DC multi-voltage input 7-segment LCD H7ET-NFV H7ET-NFV-B H7ET-NFV1 H7ET-NFV1-B
Item H7ET-NV- / H7ET-NV-H H7ET-NFV- H7ET-N-
Operating mode Accumulating
External connections Screw terminals
Number of digits 7
Case color Light grey or black (-B models)
Attachment Waterproof packing, flush mounting bracket, time unit labels
Supply voltage Backlight model: 24 VDC (0.3 W max.)
(for backlight)
No-backlight model: not required
(powered by built-in battery)
Timer input High (logic) level: 4.5 to 30 VDC
(Input impedance: approx. 4.7 k)
High (logic) level:
24 to 240 VAC / VDC, 50 / 60 Hz
Low (logic) level:
0 to 2.4 VAC / VDC, 50 / 60 Hz
No voltage input
10 k max.
Reset input No voltage input
10 k max.
Minimum pulse width 1 s
Reset system External reset and manual reset: minimum signal width of 20 ms
Time accuracy 100 ppm (25 C)
Degree of protection Front-panel: IP66, NEMA4 with waterproof packing, terminal block: IP20
H7ER
Counters
Self-powered tachometer
24Hx48Wx48.5D mm
Dual revolution display
Specifications
Count input Display Max. revolutions displayed (applicable encoder resolution)
1,000 s
-1
(1 pulse / rev.)
1,000 min
-1
(60 pulse / rev.)
1,000.0 s
-1
(10 pulse / rev)
1,000.0 min
-1
(600 pulse / rev) <->
10,000 min
-1
(60 pulse / rev) (switchable)
Light grey body Black body Light grey body Black body
No-voltage input 7-segment LCD H7ER-N H7ER-N-B
PNP / NPN universal
DC voltage input
7-segment LCD H7ER-NV H7ER-NV-B H7ER-NV1 H7ER-NV1-B
7-segment LCD with backlight H7ER-NV-H H7ER-NV-BH H7ER-NV1-H H7ER-NV1-BH
Item H7ER-NV1- / H7ER-NV1-H H7ER-NV- H7ER-NV-H H7ER-N-
Operating mode Up type
External connections Screw terminals, wire-wrap terminals
Number of digits 5 4
Max. revolutions displayed 1,000.0 s
-1
(when encoder resolution
of 10 pulse / rev is used)
1,000.0 min
-1
<-> 10,000 min
-1
(switchable with switch)
1,000 s
-1
(when encoder resolution of 1 pulse / rev is used)
1,000 min
-1
(when encoder resolution of 60 pulse / rev is used)
Attachment Waterproof packing, flush mounting bracket, revolution unit labels
Supply voltage Backlight model: 24 VDC (0.3 W max.) (for backlight lit)
No-backlight model: not required (powered by built-in battery)
Count input High (logic) level: 4.5 to 30 VDC
(Input impedance: approx. 4.7 k)
No voltage input
10 k max.
Max. counting speed 10 kHz 1 kHz
Minimum signal width 10 kHz: 0.05 ms, 1 kHz: 0.5 ms
Degree of protection Front-panel: IP66, NEMA4 with waterproof packing, terminal block: IP20
H8GN
Counters
World's smallest compact preset
counter / timer
The H8GN is a 1/32 DIN timer and counter in one. It is simple to switch
between the timer and counter functions. During operation it is also
possible to switch the display to monitor the totalising count value in
8 digits. Many sophisticated functions come standard with H8GN.
24Hx48Wx83D mm
8-digit display, 4 value and 4 set value
Front mounting
0.001 s to 9999 h (configurable)
24 VDC
Specifications
Functions Supply
voltage
Output Communications
Counter Timer No communications RS-485
Counter: up / down / reversible,
4 digits, N, F, C or K output modes
Total counter: 8 digits
A: ON-delay
B: Flicker
D: Signal OFF-delay
E: Interval
F: Accumulative
Z: ON / OFF-duty adjustable flicker
24 VDC Contact output (SPDT) H8GN-AD H8GN-AD-FLK
Rated supply voltage 24 VDC
Power consumption 1.5 W max. (for max. DC load) (inrush current: 15 A max.)
Mounting method Flush-mounting
External connections Screw terminals (M3 screws)
Terminal screw tightening torque 0.5 Nm max.
Attachment Waterproof packing, flush-mounting bracket
Display 7-segment, negative transmissive LCD; time display (h, min, s); CMW, OUT, RST, TOTAL
Present value (red, 7 mm high characters); set value (green, 3.4 mm high characters)
Digits PV: 4 digits, SV: 4 digits, when total count value is displayed: 8 digits (zeros suppressed)
Memory backup EEPROM (non-volatile memory) (number of writes: 100,000 times)
Counter Maximum counting speed 30 Hz or 5 kHz
Counting range -999 to 9,999
Input modes Increment, decrement, individual, quadrature inputs
Timer Timer modes Elapsed time (up), remaining time (down)
Inputs Input signals For counter: CP1, CP2, and reset
For timer: start, gate, and reset
Input method No-voltage input (contact short-circuit and open input)
Short-circuit (ON) impedance: 1 k max. (approx. 2 mA runoff current at 0 )
Short-circuit (ON) residual voltage: 2 VDC max.
Open (OFF) impedance: 100 k min.
Applied voltage: 30 VDC max.
Start, reset, gate Minimum input signal width: 1 or 20 ms (selectable)
Power reset Minimum power-opening time: 0.5 s
Control output SPDT contact output: 3 A at 250 VAC / 30 VDC, resistive load (cos = 1)
Minimum applied load 10 mA at 5 VDC (failure level: P, reference value)
Reset system External, manual, and power supply resets (for timer in A, B, D, E, or Z modes)
Sensor waiting time 260 ms max.
(inputs cannot be received during sensor wait time if control outputs are turned OFF)
Timer function Accuracy of operating time and setting error
(including temperature and voltage effects)
Signal start: 0.03% 30 ms max.
Power-ON start: 0.03% 50 ms max.
Ambient
temperature
Operating storage -10 C to 55 C (with no icing or condensation)
-25 C to 65 C (with no icing or condensation)
Case color Rear section: grey smoke; front section: N1.5 (black)
Degree of protection Panel surface: IP66 and NEMA Type 4X (indoors); rear case: IP20, terminal block: IP20
H7CX
Counters
The most complete digital standard
timer on the market
H7CX offers you the most complete series of products on the market
today. Based on extensive customer research, these new counters
have been designed with added-value features that users both need
and appreciate.
48Hx48Wx64D to 100 mm
Two-colour display value, red or green
Front-mounting / plug-in
6-digit model -99999 to 999999, set value -99999 to 999999
Input contact, NPN or PNP
Accessories
Specifications
Type External
connection
Sensor power
supply
Supply voltage Output type Digits Size in mm
(HxWxD)
Model
1-stage counter
1-stage counter with total counter
2-stage counter
1-stage counter with batch counter
Dual counter (addition/subtraction)
Tachometer
Screw terminal 12 VDC 100 to 240 VAC Contact and transistor
output
6 48x48x100 H7CX-AU
12 to 24 VDC / 24 VAC H7CX-AUD1
Transistor output (2x) H7CX-AUSD1
100 to 240 VAC Contact output (2x) H7CX-AW
12 to 24 VDC / 24 VAC H7CX-AWD1
1-stage counter
1-stage counter with total counter
11-pin socket 12 VDC 100 to 240 VAC Contact output 48x48x72.5 H7CX-A11
12 to 24 VDC / 24 VAC H7CX-A11D1
100 to 240 VAC Transistor output H7CX-A11S
12 to 24 VDC / 24 VAC H7CX-A11SD1
Screw terminal 100 to 240 VAC Contact output 48x48x100 H7CX-A
100 to 240 VAC Transistor output H7CX-AS
Name Model
Waterproof packing Y92S-29
DIN-rail mounting / front-connecting socket 11-pin, finger safe type P2CF-11-E
Back-connecting socket 11-pin P3GA-11
Finger safe terminal cover for P3GA-11 Y92A-48G
Hard cover Y92A-48
Soft cover Y92A-48F1
Display 7-segment, negative transmissive LCD
Digits 6-digits: -99,999 to 999,999, SV range: 0 to 9,999
Max. counting speed 30 Hz or 5 kHz (selectable, ON / OFF ratio 1:1)
Input modes Increment, decrement, command, individual, and quadrature
Control output Contact output: 3 A at 250 VAC / 30 VDC, resistive load (cos = 1)
Minimum applied load: 10 mA at 5 VDC
Transistor output: NPN open collector, 100 mA at 30 VDC
Residual voltage: 1.5 VDC max. (approx. 1V)
Leakage current: 0.1 mA max.
NEMA B300 Pilot Duty, 1/4 HP 3 A resistive load at 120 VAC, 1/3 HP 3 A resistive load at 240 VAC
Key protection Yes
Decimal point adjustment Yes (rightmost 3 digits)
Sensor waiting time 250 ms max.
Memory backup EEPROM (overwrites: 100,000 times min.) stores data 10 years min.
Ambient temperature Operating: -10 to 55 C (-10 to 50 C when mounted side by side)
Case color Black (N1.5), light grey (Munsell 5Y7/1, produced upon request)
Electrical: 100,000 operations min. (3 A at 250 VAC, resistive load)
Degree of protection Panel surface: IP66, NEMA 4 (indoors)
H8PS
Counters
Compact, easy-to-use cam positioner
The H8PS provides high-speed operation at 1,600 r/min and high-pre-
cision settings to 0.5 ensuring widespread application. H8PS features
a highly visible display with back-lit negative transmissive LCD.
Advance angle compensation function compensates for output delays.
96Hx96Wx65D mm
Front-panel/DIN-rail
24 VDC
8-, 16- and 32-outputs
NPN / PNP 100 mA at 30 VDC
Accessories
Encoder accessories
Specifications
Number of outputs Mounting method Output configuration Bank function Size in mm (HxWxD) Model
8-outputs Flush-mounting NPN transistor output No 96x96x67.5 H8PS-8B
PNP transistor output H8PS-8BP
Surface-mounting / DIN-rail mounting NPN transistor output 96x96x60.6 H8PS-8BF
PNP transistor output H8PS-8BFP
16-outputs Flush-mounting NPN transistor output Yes 96x96x67.5 H8PS-16B
32-outputs Flush-mounting NPN transistor output 96x96x67.5 H8PS-32B
Type Resolution Cable length Model
Economy 256 2 m E6CP-AG5C-C 256 2M
Standard 256 1 m E6C3-AG5C-C 256 1M
2 m E6C3-AG5C-C 256 2M
360 E6C3-AG5C-C 360 2M
720 E6C3-AG5C-C 720 2M
Rigid 256 2 m E6F-AG5C-C 256 2M
360 E6F-AG5C-C 360 2M
720 E6F-AG5C-C 720 2M
Name Specification Model
Discrete wire output cable 2 m Y92S-41-200
Connector-type output cable 2 m E5ZE-CBL200
Support software CD-ROM H8PS-SOFT-V1
USB cable A miniB, 2 m Y92S-40
Parallel input adapter Two units can operate
in parallel
Y92C-30
Protective cover Y92A-96B
Watertight cover Y92A-96N
DIN-rail mounting base Y92F-91
Name Specification Model
Shaft coupling for the E6CP Axis: 6 mm dia. E69-C06B
Shaft coupling for the E6C3 Axis: 8 mm dia. E69-C08B
Shaft coupling for the E6F Axis: 10 mm dia. E69-C10B
Extension cable 5 m (same for E6CP, E6C3,
and E6F)
E69-DF5
Rated supply voltage 24 VDC
Inputs Encoder input 8-output models: none; 16-/32-output models: bank inputs 1/2/4, origin input, start input
External inputs Input signals 8-output models: none; 16-/32-output models: bank inputs 1/2/4, origin input, start input
Input type No voltage inputs: ON impedance: 1 k max. (leakage current: approx. 2 mA at 0 )
ON residual voltage: 2 V max., OFF impedance: 100 k min., applied voltage: 30 VDC max.
Minimum input signal width: 20 ms
Number of banks 8 banks (for 16-/32-output models only)
Display method 7-segment, negative transmissive LCD (main display: 11 mm (red), sub-display: 5.5 mm (green))
Memory backup method EEPROM (overwrites: 100,000 times min.) that can store data for 10 years min.
Ambient operating temperature -10 C to 55 C (with no icing or condensation)
Storage temperature -25 C to 65 C (with no icing or condensation)
Ambient humidity 25% to 85%
Degree of protection Panel surface: IP40, rear case: IP20
Case color Light grey (Munsell 5Y7/1)
ZEN-10C2 ZEN-20C2 ZEN-20C1 ZEN-8E ZEN-10C1 ZEN-4E
How many I/O points?
Economy type
What functionality is required?
How many I/O points?
LCD, buttons,
caIendar and cIock
How many extra I/O points?
Expansion units
20 (12 , 8 O)
Expandable
up to 44 /O
10 (6 , 4 O)
Expandable
up to 34 /O
10 (6 , 4 O)
Expandable
up to 34 /O
20 (12 , 8 O)
Expandable
up to 44 /O
8 /O
(4 , 4 O)
4 /O
(4 or 4 O)
Programmable relays
ZEN the logical automatic tools for small-scale flexible control
The ZEN is a modular, expandable,
programmable relay that is designed to
provide fexible, automatic control for
small-scale machines and facilities.
The ZEN combines all the functionality
of timers, counters and relays to control
multiple input and output signals, while
being easy to install and program.
t enables any daily routine that involves
switching and control to be easily
automated, which saves time and effort.
And it is the perfect solution for building
automation applications where multiple
timer control is very important.
10 /O models with 6 inputs and
4 outputs, expandable up to 34 /Os
20 /O models with 12 inputs and
8 outputs, expandable up to 44 /Os
With LCD screen, including calendar
and clock function or LED indicator
DC power supply units have
analogue input
Expansion units for 10 & 20 /O versions
with relay output or transistor
264
Programmable relays
265
Selection table
Category CPU units
S
e
l
e
c
t
i
o
n

c
r
i
t
e
r
i
a
Model
ZEN-
10C1A
R-A-V1
ZEN-
10C2A
R-A-V1
ZEN-
10C1D
R-D-V1
ZEN-
10C2D
R-D-V1
ZEN-
10C1D
T-D-V1
ZEN-
10C2D
T-D-V1
ZEN-
20C1A
R-A-V1
ZEN-
20C2A
R-A-V1
ZEN-
20C1D
R-D-V1
ZEN-
20C2D
R-D-V1
ZEN-
20C1D
T-D-V1
ZEN-
20C2D
T-D-V1
Type LCD LED LCD LED LCD LED LCD LED LCD LED LCD LED
Number of I/O points 10 expandable up to 34 I/O 20 expandable up to 44 I/O
Inputs 6 6 6 12 12 12
Inputs / power supply 100 to 240 VAC 24 VDC 24 VDC 100 to 240 VAC 24 VDC 24 VDC
Outputs 4 4 4 8 8 8
Relays Relays Transistors Relays Relays Transistors
F
e
a
t
u
r
e
s
LCD, buttons,
calendar and clock

Analogue input (PNP)
Timers 16
Holding timers 8
Counters 16
Weekly timers 16 16 16 16 16 16
Calendar timers 16 16 16 16 16 16
Displays 16 16 16 16 16 16
Work bits 16
Holding bits 16
Analogue comparators
(PNP)
4 4
Comparators 16
Page 267
Accessories and options EEPROM (for data security and copying) ZEN-ME01 Enables programs and parameter settings to be saved or
copied to another ZEN
Battery (keeps time, date and bit values for
10 years at 25 C)
ZEN-BAT01 10 year min. battery life (at 25 C)
Connecting cable for the programming software,
RS-232C cable, 9-way 'D' connector for PC
ZEN-CIF01 2 m RS-232C (9-pin D-sub connector)
Support software for Windows ZEN-SOFT01-
V3
Runs on Windows 95, 98, 2000, ME, XP, or NT 4.0
PS unit 24 VDC, 1.3 A (30 W) ZEN-PA03024 ZEN power supply unit
ZEN kit - with LCD display AC version ZEN-KIT01-EV3 Set containing CPU unit (ZEN-10C1AR-A-V1), support
software connecting cable, ZEN support software and manual
ZEN kit - with LCD Display DC version ZEN-KIT02-EV3 Set containing CPU unit (ZEN-10C1DR-D-V1), support
software connecting cable, ZEN support software and manual
266
Programmable relays
Selection table
Category Expansion I/O units
S
e
l
e
c
t
i
o
n

c
r
i
t
e
r
i
a
Model
ZEN-
8EAR
ZEN-
8EDR
ZEN-8EDT ZEN-4EA ZEN-4ED ZEN-4ER
Type
Number of I/O points 8 4
Inputs 4 4 4 4 4
Inputs / power supply 100 to
240 VAC
24 VDC 24 VDC 100 to
240 VAC
24 VDC 24 VDC
Outputs 4 4 4 4
Relays Relays Transistors Relays
F
e
a
t
u
r
e
s
LCD, buttons,
calendar and clock
Analogue input (PNP)
Timers
Holding timers
Counters
Weekly timers
Calendar timers
Displays
Work bits
Holding bits
Analogue comparators
(PNP)
Comparators
Page 267
Programmable relays - Cat.-No. L01E-EN-01 267
ZEN
Programmable relays
Flexible automation
Within OMRON's ZEN range there are up to 44 I/O to control.
Our basic unit is either a 10 I/O or a 20 I/O version. These basic
units are available with a realtime clock, an LCD screen and buttons,
or with LED indication and no buttons. Each CPU can be handle
up to 3 expansion units
10 I/O models with 6 inputs and 4 outputs, expandable up to 34 I/O
20 I/O models with 12 inputs and 8 outputs, expandable up to 44 I/O
With LCD screen, including calendar & clock function or LED
indicator
DC power supply units have analogue input
Expansion units for 10 & 20 I/O versions with relay output or
transistor
Accessories and options
Specifications
Name Number
of I/O
points
Inputs Inputs / power
supply
Outputs Type LCD,
buttons,
calendar
and clock
Ana-
logue
input
Timers, counters, weekly
timers, calendar timers,
displays, work bits, hol-
ding bits, comparators
Analogue
compara-
tors
Holding
timers
Size in mm
(HxWxD)
Model number
CPU
units
10
Expand-
able
up to
34 I/O
6 100 to 240 VAC 4 Relays LCD yes 16 4 8 90x70x56 ZEN-10C1AR-A-V1
LED ZEN-10C2AR-A-V1
6 24 VDC 4 Relays LCD yes yes ZEN-10C1DR-D-V1
LED yes ZEN-10C2DR-D-V1
6 24 VDC 4 Transistors LCD yes yes ZEN-10C1DT-D-V1
LED yes ZEN-10C2DT-D-V1
20
Expand-
able
up to
44 I/O
12 100 to 240 VAC 8 Relays LCD yes 90x122.5x56 ZEN-20C1AR-A-V1
LED ZEN-20C2AR-A-V1
12 24 VDC 8 Relays LCD yes yes ZEN-20C1DR-D-V1
LED yes ZEN-20C2DR-D-V1
12 24 VDC 8 Transistors LCD yes yes ZEN-20C1DT-D-V1
LED yes ZEN-20C2DT-D-V1
Expan-
sion
I/O
units
8 4 100 to 240 VAC 4 Relays 90x70x56 ZEN-8EAR
4 24 VDC 4 Relays ZEN-8EDR
4 24 VDC 4 Transistors ZEN-8EDT
4 4 100 to 240 VAC ZEN-4EA
4 24 VDC ZEN-4ED
4 Relays ZEN-4ER
EEPROM (for data security and copying) ZEN-ME01
Battery (keeps time, date and bit values for 10 years at 25 C) ZEN-BAT01
For the programming software, RS-232C cable, 9-way D connector for PC ZEN-CIF01
Support software for Windows ZEN-SOFT01-V3
PS unit 24 VDC, 1.3 A (30 W) ZEN-PA03024
ZEN kit - CPU unit ZEN-10C1AR-A-V1, support software and RS-232C cable ZEN-KIT01-EV3
ZEN kit - CPU unit ZEN-10C1DR-D-V1, support software and RS-232C cable ZEN-KIT02-EV3
Item Specification
ZEN-0CAR-A-V1 ZEN-0CD-D-V1
Power supply voltage 100 to 240 VAC 24 VDC
Rated power supply voltage 85 to 264 VAC 20.4 to 26.4 VDC
Power consumption 30 V max. (with 3 expansion units connected) 6.5 W max. (with 3 expansion units connected)
Ambient temperature LCD-type CPU unit (operation panel and calendar / clock function): 0 C to 55 C
LED-type CPU unit (no operation panel or calendar / clock function): -25 C to 55 C
Ambient storage temperature LCD-type CPU unit: -20 C to 75 C, LED-type CPU unit: -40 C to 75 C
Control method Stored program control
I/O control method Cyclic scan
Programming language Ladder diagram
Program capacity 96 lines (3 input conditions and 1 output per line)
LCD display 12 characters x 4 lines, with backlight (LCD-type CPU unit only)
Operation keys 8 (4 cursor keys and 4 operation keys) (LCD-type CPU unit only)
Super-capacitor holding time 2 days min. (25 C)
Battery life (ZEN-BAT01) 10 years min. (25 C)
Time function (RTC) ZEN0C1-- only, accuracy: 1 to 2 min / month (at 25 C)

K3GN
Process Temperature
K3HB-S K3HB-V K3HB-H K3HB-X K3MA-F K3MA-L K3MA-J
48 x 24 mm
(1/32 DIN)
96 x 48 mm
(1/8 DIN)
Frequency / rate Process Temperature Weighing Linear sensor
Which application is required? Which application is required?
General purpose Advanced Process /
frequency / rate
Digital panel indicators
Omron's digital panel indicator series
accepts a wide range of input signals
(process, temperature, pulse/impulse, weight,
etc.), that can be displayed in any required
value. The series also includes a green / red
colour change display feature, which clearly
visualises the status of a process.
Multiple inputs, including process,
temperature, frequency and many more!
Highly visible display provides a clear,
highly stable read-out of values
Large, front-panel keys for unambiguous,
user-friendly programming
Dust-proof and waterproof front case that
complies with NEMA4X (P66 equivalent)
standards
Wide range of models with communication
capability including DeviceNet
268
,)#$ ,)#3 ,)#1
Rotary pulse Timer interval
Up / down
counting pulse
The K3HB indicators provide a bar-graph position
indication, which is unique in 1/8 DN horizontal
housing panel indicators. The sampling speed
of this range has been increased to 50 times per
second, or 2,000 times per second for the linear
sensor indicator version.
Furthermore, users can specify DeviceNet
communications, with the option of a DeviceNet
output module delivering high-speed data
communication with PLCs, without the need for
special programming.
The full range of K3HB analogue input panel
indicators includes a process indicator (K3HB-X),
a temperature indicator (K3HB-H), a weighing
indicator (K3HB-V) and a linear sensor indicator
(K3HB-S). These indicators provide convenient,
high performance solutions in a broad spectrum
of applications in the process industry, as well
as in machinery applications such as binding,
soldering, semiconductor manufacture, moulding
and mixing machines. The K3HB indicators are
modular in design, which enables users to select
exactly the functionality they require.
K3HB Omrons new panel indicator
269
Table of contents
Selection table 270
1/32 DIN multi-function K3GN 272
1/8 DIN standard indicators K3MA-J, -L, -F 273
1/8 DIN advanced indicators -
analogue input
K3HB-X, -H, -V, -S 274
1/8 DIN advanced indicators -
digital input
K3HB-R, -P, -C 276
270
Selection table
Panel indicator type
Multifunctional
digital panel
indicator
Process indicator
Temperature
indicator
Frequency / rate
indicator
Process indicator
S
e
l
e
c
t
i
o
n

c
r
i
t
e
r
i
a
Model K3GN K3MA-J K3MA-L K3MA-F K3HB-X
Size 1/32 DIN 1/8 DIN
F
e
a
t
u
r
e
s
Colour change display
Number of digits 5 5 4 5 5
Leading zero suppression
Forced zero function
Min. / max. hold function
Average processing
User selectable inputs
Start-up compensating time
Key protection
Decimal point position
setting

Accuracy 0.1% of full scale 0.1% of full scale 0.1% of full scale 0.1% of full scale 0.1% of full scale
(DC voltage &
DC current),
0.5% of full scale
(AC voltage &
AC current)
Input range 0 to 20 mA, 4 to 20 mA
or 0 to 5 V, 1 to 5 V,
-5 to 5 V, -10 to 10 V or
0 to 30 Hz or 0 to 5 kHz
0 to 20 mA, 4 to 20 mA
or 0 to 5 V, 1 to 5 V,
-5 to 5 V, -10 to 10 V
Pt100, JPt100 or
thermocouple K, J, T,
E, L, U, N, R, S, B
0 to 30 Hz or 0 to 5 kHz 0.000 to 10.000 A,
0.0000 to 19.999 mA,
-199.99 to 199.99 mA,
4.000 to 20.000 mA,
0.0 to 400.0 V, 0.0000
Sample rate 4 Hz 4 Hz 0 to 30 Hz or 0 to 5 kHz 0 to 30 Hz or 0 to 5 kHz 50 Hz
Features Remote / local
processing, parameter
initialisation,
programmable output
configuration,
process value hold
Teaching, comparative
output pattern
selection, parameter
initialisation,
programmable output
configuration,
process value hold
Programmable output
configuration,
process value hold
Teaching, comparative
output pattern
selection,
programmable output
configuration,
process value hold
Scaling, teaching,
averaging, output
hysteresis, output
OFF-delay, output test,
bank selection, reset,
comparative output
Sensor power supply
F
r
o
n
t

p
r
o
t
e
c
t
i
o
nIP rating IP66 IP66 IP66 IP66 IP66
Supply voltage 24 VDC 24 VAC / VDC or
100 to 240 VAC
24 VAC / VDC or
100 to 240 VAC
24 VAC / VDC or
100 to 240 VAC
100 to 240 VAC or
24 VAC / VDC
I
n
p
u
t
s
NPN
PNP
Temperature
Contact
Voltage pulse
Load cell
DC voltage
DC current
AC voltage
AC current
O
u
t
p
u
t
s
Relay
NPN
PNP
Linear
BCD
Comms
Page 272 273 274
271
Temperature indicator Weighing indicator Linear sensor indicator Rotary pulse indicator Time interval indicator
Up / down counting
pulse indicator
K3HB-H K3HB-V K3HB-S K3HB-R K3HB-P K3HB-C
1/8 DIN

5 5 5 5 5 5

Thermocouple: 0.3% of
full scale, Pt-100: 0.2%
of full scale
0.1% of full scale One input: 0.1% of full
scale, two inputs: 0.2%
of full scale
0.006% rgd 1 digit
0.02% rgd 1 digit
0.08% rgd 1 digit
Pt100, thermocouple K, J,
T, E, L, U, N, R, S, B, W
0.00 to 199.99 mV,
0.000 to 19.999 mV,
100.00 mV, 199.99 mV
0 to 20 mA, 4 to 20 mA,
0 to 5 V, -5 to 5 V,
-10 to 10 V
No voltage contact:
30 Hz, voltage pulse:
50 kHz, open collector:
50 kHz
No voltage contact:
50 kHz
No voltage contact:
50 kHz
50 Hz 50 Hz 2000 Hz 50 Hz 50 Hz 50 Hz
Scaling, teaching,
averaging, output
hysteresis, output
comparative output
Scaling, teaching,
averaging, output
hysteresis, output
comparative output
Scaling, 2-input
calculation, teaching,
averaging, output
hysteresis, output
comparative output
Scaling, measurement
operation selection,
averaging, previous
average value
comparison, output
hysteresis, output
teaching, display value
selection, display colour
selection, key protection,
bank selection,
display refresh period,
maximum / minimum
hold, reset
output hysteresis, output
teaching, display value
selection, display colour
selection, key protection,
bank selection,
display refresh period,
maximum / minimum
hold, reset
output hysteresis, output
display value selection,
display colour selection,
key protection, bank
selection, display refresh
period, maximum /
minimum hold, reset

IP66 IP66 IP66 IP66 IP66 IP66
100 to 240 VAC or
24 VAC / VDC
100 to 240 VAC or
24 VAC / VDC
100 to 240 VAC or
24 VAC / VDC
100 to 240 VAC or
24 VAC / VDC
100 to 240 VAC or
24 VAC / VDC
100 to 240 VAC or
24 VAC / VDC

274 276
Digital panel indicators - Cat.-No. N101-E2-03 272
K3GN
Compact and intelligent digital
panel meter
The K3GN is able to cover a wide variety of applications with its 3 main
functions: process meter, RPM processor/tachometer and digital data
display for PC / PLC. Configuration is easy and the design is advanced
and compact.
Process indicator DC voltage / current
RPM process / tachometer
Digital data display for PC / PLC
Very compact 1/32 DIN housing: 24Hx48Wx83D mm
5-digit display with programmable display colour, in red or green
Specifications
Input type Supply voltage Output Model
No communications RS-485
DC voltage / current, NPN 24 VDC Dual relays (SPST-NO) K3GN-NDC 24 DC K3GN-NDC-FLK 24 DC
Three NPN open collector K3GN-NDT1 24 DC K3GN-NDT1-FLK 24 DC
DC voltage / current, PNP Dual relays (SPST-NO) K3GN-PDC 24 DC K3GN-PDC-FLK 24 DC
Three PNP open collector K3GN-PDT2 24 DC K3GN-PDT2-FLK 24 DC
Supply voltage 24 VDC
Operating voltage range 85% to 110% of the rated supply voltage
Power consumption 2.5 W max. (at max. DC load with all indicators lit)
Ambient temperature Operating: -10 C to 55 C (with no condensation or icing)
Storage: -25 C to 65 C (with no condensation or icing)
Display refresh period Sampling period (sampling times multiplied by number of averaging times if average processing is selected)
Max. displayed digits 5 digits (-19999 to 99999)
Display 7-segment digital display, character height: 7.0 mm
Polarity display - is displayed automatically with a negative input signal
Zero display Leading zeros are not displayed
Scaling function Programmable with front-panel key inputs (range of display: -19999 to 99999).
The decimal point position can be set as desired.
External controls HOLD: (measurement value held)
ZERO: (forced-zero)
Hysteresis setting Programmable with front-panel key inputs (0001 to 9999)
Other functions Programmable colour display
Selectable output operating action
Teaching set values
Average processing (simple average)
Lockout configuration
Communications writing control (communications output models only)
Output Relays: 2 SPST-NO
Transistors: 3 NPN open collector
3 PNP open collector
Combinations:
Communications output (RS-485) + relay outputs
Communications output (RS-485) + transistor outputs
Communications output (RS-485) + transistor outputs (3 PNP open collector)
Communications Communications function: RS-485
Delay in comparative outputs
(transistor outputs)
750 ms max.
Degree of protection Front-panel: NEMA4X for indoor use (equivalent to IP66)
Rear case: IEC standard IP20
Terminals: IEC standard IP20
Memory protection Non-volatile memory (EEPROM) (possible to rewrite 100,000 times)
Digital panel indicators - Cat.-No. K3MA-J: N108-E2-04A, K3MA-L: N109-E2-04, K3MA-F: N107-E2-03A, 273
K3MA-J, -L, -F
Highly visible LCD display with
2-colour (red and green) LEDs
The K3MA series comes with a process meter, a frequency / rate meter
and a temperature meter of either 100 to 240 VAC or 24 VAC / VDC.
All are equipped with the same quality display and have the same short
depth of 80 mm.
DIN-size of 48Hx96W mm
Highly visible, negative transmissive backlit LCD display
14.2 mm high characters
5 digits (-19,999 to 99,999), K3MA-L: 4 digits
Front-panel IP66
Accessories
Specifications
Indicator Input type & ranges Supply voltage Output Model
Process meter DC voltage: 0 to 5 V, 1 to 5 V, -5 to 5 V, -10 to 10 V
DC current: 0 to 20 mA, 4 to 20 mA
100 to 240 VAC 2 relay contact outputs (SPST-NO) K3MA-J-A2 100-240VAC
24 VAC / VDC 2 relay contact outputs (SPST-NO) K3MA-J-A2 24VAC/VDC
Temperature meter Platinum-resistance thermometer: Pt100, JPt100 or
thermocouple K, J, T, E, L, U, N, R, S, B
100 to 240 VAC 1 relay contact output (SPDT) K3MA-L-C 100-240VAC
24 VAC / VDC 1 relay contact output (SPDT) K3MA-L-C 24VAC/VDC
Frequency / rate meter Rotary pulse: no voltage: 0.05 to 30.00 Hz;
open collector: 0.1 to 5000.0 Hz
100 to 240 VAC 2 relay contact outputs (SPST-NO) K3MA-F-A2 100-240VAC
24 VAC / VDC 2 relay contact outputs (SPST-NO) K3MA-F-A2 24VAC/VDC
Name Model
Splash-proof soft cover K32-49SC
Hard cover K32-49HC
Item 100-240 VAC models 24 VAC / VDC models
Supply voltage 100 to 240 VAC 24 VAC (50 / 60 Hz), 24 VDC
Operating voltage range 85% to 110% of the rated supply voltage
Power consumption (under maximum load) 6 VA max. 4.5 VA max. (24 VAC) 4.5 W max. (24 VDC)
Ambient temperature Operating: -10 C to 55 C (with no condensation or icing)
Storage: -25 C to 65 C (with no condensation or icing)
Weight Approx. 200 g
Display 7-segment digital display, character height: 14.2 mm
Polarity display "-" is displayed automatically with a negative input signal
Zero display Leading zeros are not displayed
Hold function Max. hold (maximum value), min. hold (minimum value)
Hysteresis setting Programmable with front-panel key inputs (0001 to 9,999)
Delay in comparative outputs 1 s max.
Degree of protection Front-panel: NEMA4X for indoor use (equivalent to IP66)
Rear case: IEC standard IP20
Terminals: IEC standard IP00 + finger protection (VDE 0106 / 100)
Memory protection Non-volatile memory (EEPROM) (possible to rewrite 100,000 times)
K3HB-X, -H, -V, -S
Process, temperature, weighing and
linear sensor indicators
These indicators with analogue input feature a clear and easy-to-use
colour change display. All models are equipped with an IP66 housing.
K3HB series is high-speed, with a sample rate of 50 Hz, and even
2,000 Hz for K3HB-S
Position meter indication for easy monitoring
Optional DeviceNet, RS-232C, RS-485
Double display, with 5 digits, in two colours
Dimensions: 48Hx96Wx100D mm
Option boards
Sensor power supply / output boards
Relay / transistor output boards
Event input boards
*1
CPA / CPB can be combined with relay outputs only. Bold = preferred stock item
*2
Only one of the following can be used by each digital indicator: RS-232C / RS-485 communications, a linear output, or DeviceNet communications.
K3HB has got three slots for option boards: slot B, slot C and slot D.
Type of indicator Input sensor type and range Supply voltage Base unit model
Process indicator
K3HB-X
AC current input, from 0.000 to 10.000 A, 0.0000 to 19.999 mA 100 - 240 VAC K3HB-XAA 100-240VAC
24 VAC / VDC K3HB-XAA 24VAC/VDC
DC current input, from 199.99 mA, to 4.000 to 20.000 mA 100 - 240 VAC K3HB-XAD 100-240VAC
24 VAC / VDC K3HB-XAD 24VAC/VDC
AC voltage input, from 0.0 to 400.0 V to 0.0000 to 1.999 V 100 - 240 VAC K3HB-XVA 100-240VAC
24 VAC / VDC K3HB-XVA 24VAC/VDC
DC voltage input, from 199.99 V to 1.0000 to 5.0000 V 100 - 240 VAC K3HB-XVD 100-240VAC
24 VAC / VDC K3HB-XVD 24VAC/VDC
Temperature indicator
K3HB-H
Temperature input Pt100, thermocouple K, J, T, E, L, U, N, R, S, B, W 100 - 240 VAC K3HB-HTA 100-240VAC
24 VAC / VDC K3HB-HTA 24VAC/VDC
Weighing indicator
K3HB-V
Load cell input (DC low voltage input), 0.00 to 199.99 mV, 0.000 to 19.999 mV,
100.00 mV, 199.999 mV
100 - 240 VAC K3HB-VLC 100-240 VAC
24 VAC / VDC K3HB-VLC 24VAC/VDC
Linear sensor indicator
K3HB-S
DC process input, 0 to 5 V, 1 to 5 V, -5 to 5 V, -10 to 10 V, 0 to 20 mA, 4 to 20 mA 24 VAC / VDC K3HB-SSD AC/DC24
100 - 240 VAC K3HB-SSD AC100-240
Slot Output Sensor power supply Communications Model Applicable indicator types
B Relay PASS: SPDT 12 VDC 10%, 80 mA K33-CPA
*1
K3HB-X, -H, -S
Linear current DC0(4) - 20 mA K33-L1 A
*2
K3HB-X, -H, -S
Linear voltage DC0(1) - 5 V, 0 to 10 V K33-L2A
*2
K3HB-X, -H, -S
K33-A
*2
K3HB-X, -H, -S
RS-232C K33-FLK1 A
*2
K3HB-X, -H, -S
RS-485 K33-FLK3A
*2
K3HB-X, -H, -S
Relay PASS: SPDT 10 VDC 5%, 100 mA K33-CPB
*1
K3HB-V
Linear current DC0(4) - 20 mA K33-L1B
*2
K3HB-V
Linear voltage DC0(1) - 5 V, 0 to 10 V K33-L2B
*2
K3HB-V
K33-B
*2
K3HB-V
RS-232C K33-FLK1B
*2
K3HB-V
RS-485 K33-FLK3B
*2
K3HB-V
Slot Output Communications Model
C Relay H / L: SPDT each K34-C1
HH / H / LL / L: SPST-NO each K34-C2
Transistor NPN open collector: HH / H / PASS / L / LL K34-T1
PNP open collector: HH / H / PASS / L / LL K34-T2
DeviceNet K34-DRT
*2
Slot Input type Number of points Communications Model
D NPN open collector 5 M3 terminal blocks K35-1
8 10-pin MIL connector K35-2
PNP open collector 5 M3 terminal blocks K35-3
K3HB-X, -H, -V, -S
275
Accessories
Specifications
Special cable (for event inputs with 8-pin connector) K32-DICN
Power supply voltage 100 to 240 VAC (50 / 60 Hz), 24 VAC / VDC, DeviceNet power supply: 24 VDC
Allowable power supply voltage range 85% to 110% of the rated power supply voltage, DeviceNet power supply: 11 to 25 VDC
Power consumption 100 to 240 V: 18 VA max. (max. load), 24 VAC / DC: 11 VA / 7 W max. (max. load)
Display method Negative LCD (backlit LED) display 7-segment digital display
(character height: PV: 14.2 mm (green / red); SV: 4.9 mm (green))
Display range -19,999 to 99,999
Weight Approx. 300 g (base unit only)
Degree of protection Front-panel Conforms to NEMA 4X for indoor use (equivalent to IP66)
Rear case IP20
Terminals IP00 + finger protection (VDE0106 / 100)
Memory protection EEPROM (non-volatile memory), number of rewrites: 100,000
Event input ratings Contact ON: 1 k max., OFF: 100 k min.
No-contact ON residual voltage: 2 V max., OFF leakage current: 0.1 mA max., load current: 4 mA max.
Maximum applied voltage: 30 VDC max.
Output ratings Transistor output Maximum load voltage 24 VDC
Maximum load current 50 mA
Leakage current 100 A max.
Contact output
(resistive load)
Rated load 5 A at 250 VAC, 5 A at 30 VDC
Rated through current 5 A
Mechanical life expectancy 5,000,000 operations
Electrical life expectancy 100,000 operations
Linear output Allowable load impedance 500 max. (mA); 5 k min. (V)
Resolution Approx. 10,000
Output error 0.5% FS
K3HB-R, -P, -C
Rotary pulse, timer interval and
up- / down-counting pulse indicators
These indicators with analogue input feature a clear and easy-to-use
colour change display. All models are equipped with an IP66 housing.
K3HB-R and -C are high-speed, with a sample rate up to 50 kHz.
Position meter indication for easy monitoring
Optional DeviceNet, RS-232C, RS-485
Double display, with 5 digits, in two colours
Dimensions: 48Hx96Wx100D mm
Option boards
Sensor power supply / output boards
Relay / transistor output boards
Event input boards
*1
CPA can be combined with relay outputs only. Bold = preferred stock item
*2
Only one of the following can be used by each digital indicator: RS-232C / RS-485 communications, a linear output, or DeviceNet communications.
K3HB has got three slots for option boards: slot B, slot C and slot D.
Accessories
Type of indicator Input ranges Supply voltage Input sensor Base unit model
Rotary pulse indicator K3HB-R No voltage contact: 30 Hz max.
Voltage pulse: 50 kHz max.
Open collector: 50 kHz max.
100 - 240 VAC NPN input / voltage pulse K3HB-RNB 100-240VAC
24 VAC / VDC K3HB-RNB 24VAC/VDC
100 - 240 VAC PNP input K3HB-RPB 100-240VAC
24 VAC / VDC K3HB-RPB 24VAC/VDC
100 - 240 VAC K3HB-PNB 100-240VAC
100 - 240 VAC K3HB-PPB 100-240VAC
Timer interval indicator K3HB-P 24 VAC / VDC K3HB-PPB 24VAC/VDC
100 - 240 VAC K3HB-CNB 100-240VAC
Up / down counting pulse indicator K3HB-C 24 VAC / VDC K3HB-CNB 24VAC/VDC
24 VAC / VDC K3HB-CPB 24VAC/VDC
Slot Output Sensor power supply Communications Model
B Relay PASS: SPDT 12 VDC 10%, 80 mA K33-CPA
*1
Linear current DC0(4) - 20 mA K33-L1 A
*2
Linear voltage DC0(1) - 5 V, 0 to 10 V K33-L2A
*2
K33-A
*2
RS-232C K33-FLK1 A
*2
RS-485 K33-FLK3A
*2
Slot Output Communications Model
C Relay H / L: SPDT each K34-C1
HH / H / LL / L: SPST-NO each K34-C2
Transistor NPN open collector: HH / H / PASS / L / LL K34-T1
PNP open collector: HH / H / PASS / L / LL K34-T2
DeviceNet K34-DRT
*2
BCD + transistor NPN open collector: HH / H / PASS / L / LL K34-BCD
Slot Input type Number of points Communications Model
D NPN open collector 5 M3 terminal blocks K35-1
PNP open collector 5 M3 terminal blocks K35-3
Special cable (for event inputs with 8-pin connector) K32-DICN
Special BCD output cable K32-BCD
K3HB-R, -P, -C
277
Specifications
Power supply voltage 100 to 240 VAC (50 / 60 Hz), 24 VAC / VDC, DeviceNet power supply: 24 VDC
Allowable power supply voltage range 85% to 110% of the rated power supply voltage, DeviceNet power supply: 11 to 25 VDC
Power consumption 100 to 240 V: 18 VA max. (max. load), 24 VAC / DC: 11 VA / 7 W max. (max. load)
Display method Negative LCD (backlit LED) display 7-segment digital display
(character height: PV: 14.2 mm (green / red); SV: 4.9 mm (green))
Display range -19,999 to 99,999
Weight Approx. 300 g (base unit only)
Degree of protection Front-panel Conforms to NEMA 4X for indoor use (equivalent to IP66)
Rear case IP20
Terminals IP00 + finger protection (VDE0106 / 100)
Memory protection EEPROM (non-volatile memory), number of rewrites: 100,000
Event input ratings Contact ON: 1 k max., OFF: 100 k min.
No-contact ON residual voltage: 2 V max., OFF leakage current: 0.1 mA max., load current: 4 mA max.
Maximum applied voltage: 30 VDC max.
Output ratings Transistor output Maximum load voltage 24 VDC
Maximum load current 50 mA
Leakage current 100 A max.
Contact output
(resistive load)
Rated load 5 A at 250 VAC, 5 A at 30 VDC
Rated through current 5 A
Mechanical life expectancy 5,000,000 operations
Electrical life expectancy 100,000 operations
Linear output Allowable load impedance 500 max. (mA); 5 k min. (V)
Resolution Approx. 10,000
Output error 0.5% FS

Control

Uploaded by

Copyright:

Available Formats

Control

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Control

Uploaded by

Copyright:

Available Formats

What type of output? What type of output?

How many loops are required?

Series operation only 90 /

Page 242 243

You might also like