CONTROL ACCESSORIES

Cable Ducts
Product Data - Type A, Type B Ordering Information Technical Data Overall Dimensions

Page 9/2,9/3 9/4,9/5 9/6 9/43

Limit Switches
Product Data and Ordering Information Technical Data Overall Dimensions

Page 9/7-9/12 9/13 9/44-9/46

Foot Switches
Product Data and Ordering Information Technical Data Overall Dimensions

Page 9/14,9/15 9/16 9/47

Electronic Timers
Product Data and Ordering Information Accessories Technical Data Overall Dimensions

Page 9/17,9/18 9/19 9/23 9/48

www.LNTEBG.com

CONTROL ACCESSORIES

Electro Mechanical Timing Devices

Product Data and Ordering Information Accessories Technical Data Overall Dimensions

Page 9/17,9/20 9/21 9/24,9/25 9/49,9/50

Time Switches
Product Data and Ordering Information Accessories Technical Data Overall Dimensions

Page 9/17,9/22 9/22 9/26 9/50

Modular Remote Control Units

Product Data and Ordering Information

Page 9/27-9/29,9/31 9/32,9/34-9/36,9/38 9/30,9/33,9/34,9/37,9/38 9/31,9/33 9/40-9/42 9/51-9/53

Push Button Pendants

Product Data and Ordering Information Overall Dimensions

Page 9/39 9/54

Accessories Spares Technical Data Overall Dimensions

www.LNTEBG.com

SALIENT FEATURES OF CABLE DUCTS

Manufactured from specially compounded high impact rigid polyvinyl chloride. Will not peel, chip or crack. Resists oils, salt solutions, fungus. Nonflammable, warp-proof, non-brittle. High dielectric strength and withstands temperature upto 70 Tested as per European and North American Standards, Carries CSA_NRTL/C, UL and CE Mark. Unique Cover locking design. Prevents popping up of wires, while removing cover. Elongated slots at the bottom allows flexible mounting. Heavy, robust sections.

Applications :
Facilities systematic wiring. Enhances aesthetics and clarity.

Permits faster connections, addition and fault tracing of wires.

(Manufactured by Salzer Controls Limited)

9/1

www.LNTEBG.com

PRODUCT INFORMATION - TYPE A

Cable Housing Capacity (Nos) 1.5 mm2 OD 3.18 mm 16 AWG 11 19 31 37 59 56 67 100 134 74 134 178 278 316 495 356 2.5mm2 OD 3.53 mm 14 AWG 9 15 25 30 48 45 54 81 108 60 108 145 226 257 401 289 4 mm2 OD 4.01mm 12 AWG 7 12 20 23 37 35 42 63 84 47 84 112 175 199 311 224

S.No.

Channel with Cover Width x Height mm

Standard Pack, *Total Length in Metres

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

A15 x 15 A25 x 15 A25 x 25 A25 x 30 A30 x 40 A25 x 45 A30 x 45 A45 x 45 A60 x 45 A25 x 60 A45 x 60 A60 x 60 A75 x 75 A80 x 80 A100 x 100 A120 x 60

200 128 96 96 96 96 64 36 48 72 36 36 16 16 8 8

Note: * Each Length of 1 Metre

www.LNTEBG.com

9/2

PRODUCT INFORMATION - TYPE B

Cable Housing Capacity (Nos) 1.5 mm2 OD 3.18 mm 16 AWG 36 48 72 92 81 121 160 123 180 246 308 165 251 337 315 425 531 807 2.5mm2 OD 3.53 mm 14 AWG 29 39 57 75 65 98 130 99 146 199 247 134 203 272 256 344 429 653 4 mm2 OD 4.01mm 12 AWG 23 31 45 59 51 77 102 78 114 156 194 105 159 214 201 270 336 512

S.No.

Channel with Cover Width x Height mm

Standard Pack, *Total Length in Metres

1 2 3 4 5 6 7 8 9 10 11

B25 x 30 B25 x 40 B25 x 60 B25 x 80 B40 x 40 B40 x 60 B40 x 80 B60 x 40 B60 x 60 B60 x 80 B60 x 100 B80 x 40 B80 x 60 B80 x 80 B100 x 60 B100 x 80 B100 x 100 B150 x 100

72 72 36 36 36 36 36 24 24 24 16 24 24 24 16 16 16 8

12 13 14 15 16 17 18

Note: * Each Length of 2 Metre

9/3

www.LNTEBG.com

ORDERING INFORMATION - TYPE A

Description A 15x15 A 15x25 A 25x25 A 30x25 A 40x30 A 45x25 A 45x30 A 45x45 A 45x60 A 60x25 A 60x45 A 60x60 A 60x120 A 75x45 A 75x75 A 80x80 (HxW) 1M STD SLOT STD GREY (HxW) 1M STD SLOT STD GREY (HxW) 1M STD SLOT STD GREY (HxW) 1M STD SLOT STD GREY (HxW) 1M STD SLOT STD GREY (HxW) 1M STD SLOT STD GREY (HxW) 1M STD SLOT STD GREY (HxW) 1M STD SLOT STD GREY (HxW) 1M STD SLOT STD GREY (HxW) 1M STD SLOT STD GREY (HxW) 1M STD SLOT STD GREY (HxW) 1M STD SLOT STD GREY (HxW) 1M STD SLOT STD GREY (HxW) 1M STD SLOT STD GREY (HxW) 1M STD SLOT STD GREY (HxW) 1M STD SLOT STD GREY

Catalogue No. CDA1515SG CDA1525SG CDA2525SG CDA3025SG CDA4030SG CDA4525SG CDA4530SG CDA4545SG CDA4560SG CDA6025SG CDA6045SG CDA6060SG CDA60120SG CDA7545SG CDA7575SG CDA8080SG CDA100100SG CDA15SG CDA25SG CDA30SG CDA45SG CDA60SG CDA75SG CDA80SG CDA100SG

A 100x100 (HxW) 1M STD SLOT STD GREY A 15 A 25 A 30 A 45 A 60 A 75 A 80 A 100 COVER STD GREY COVER STD GREY COVER STD GREY COVER STD GREY COVER STD GREY COVER STD GREY COVER STD GREY COVER STD GREY

Note: Replace last two digits as SC for special color (Please Specify Color)

www.LNTEBG.com

9/4

ORDERING INFORMATION - TYPE B

Description B 25x30 B 25x40 B 25x60 B 25x80 B 30x20 B 40x40 B 40x60 B 40x80 B 45x20 B 60x20 B 60x40 B 60x60 (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY (WxH) 1M STD SLOT GREENISH GREY

Cataloge No. CDB2530GG CDB2540GG CDB2560GG CDB2580GG CDB3020GG CDB4040GG CDB4060GG CDB4080GG CDB4520GG CDB6020GG CDB6040GG CDB6060GG CDB6080GG CDB60100GG CDB8040GG CDB8060GG CDB8080GG CDB10060GG CDB10080GG CDB100100GG CDB150100GG CDB25GG CDB30GG CDB40GG CDB60GG CDB80GG CDB100GG CDB150GG

B 60x80 B 60x100 B 80x40 B 80x60 B 80x80 B 100x60 B 100x80

B 100x100 (WxH) 1M STD SLOT GREENISH GREY B 150x100 (WxH) 1M STD SLOT GREENISH GREY B 25 B 30 B 40 B 60 B 80 B 100 B 150 COVER GREENISH GREY COVER GREENISH GREY COVER GREENISH GREY COVER GREENISH GREY COVER GREENISH GREY COVER GREENISH GREY COVER GREENISH GREY

Note: Replace last two digits as SC for special color (Please Specify Color)
9/5

www.LNTEBG.com

TECHNICAL DATA
CABLE DUCTS
Type A Type B

Material

High impact, self extinguishing warp-proofing rigid PVC. Other material such as chlorine free PPO is available.

High impact, self extinguishing warp-proofing rigid PVC. Other material such as chlorine free PPO is available.

Color Standard Other Colors Mechanical Properties Tensile strength IZOD impact strength Electrical Properties Dielectric strength Specific resistance Thermal Properties Flammability UL 94 VO UL 94 VO 36 kV/mm 6.1 x 1014 ohm.cm 36 kV/mm 6.1 x 1014 ohm.cm 390 kg/cm2 7 kgcm/cm 390 kg/cm2 7 kg.cm/cm Light Grey Black, Ivory, White, Blue, Green and Pink Dark Grey Black, Ivory, White, Blue, Green and Pink

www.LNTEBG.com

9/6

SALIENT FEATURES OF LIMIT SWITCHES

Movable contact assembly with two coiled springs provides quick-make / quick-break action. Absence of zero contact pressure ensures non-teasing action even with an extremely slow operation motion. Light weight phosphor bronze contact carrier with silver contacts, assure long life on life load applications. Silver contacts, definite wiping action and high contact pressure assure reliability on dry circuit applications. Phenolic moulded case provides great physical strength, high arc resisting capacity and semi-dust proofness. High degree of versatility as wide variety of operating heads available with individual mounting.

Applications :
Textile Machines Injection Moulding Machines Electrical hoist and cranes Machine tools and wherever a mechanical to Electrical transution is required

(Manufactured by Pneumatic Controls)

9/7

www.LNTEBG.com

RANGE AND ORDERING INFORMATION

Contacts Description Type PC 100 SERIES SNAP - WITH HORIZONTAL ROLLER ACTUATOR SNAP - WITH VERTICAL ROLLER ACTUATOR SNAP - WITH STEM ACTUATOR ROLLER SNAP - WITH BELLOW ACTUATOR PC 200 SERIES SNAP BALL ACTUATOR NORM - WITH ROLLER ACTUATOR SNAP LEVER ACTUATOR NORM - WITH ROLLER ACTUATOR SNAP ROLLER LEVER ACTUATOR NORM - WITH ROLLEVER LEVER ACTUATOR SNAP SLIPPING ROLLER LEVER ACTUATOR NORM - WITH SLIPPING ROLLER LEVER ACTUATOR SNAP ROTATING ROLLER LEVER ACTUATOR NORM - WITH ROTATING ROLLER LEVER ACTUATOR SNAP SPRING NEEDLE ACTUATOR NORM - WITH SPRING NEEDLE ACTUATOR SNAP ANGULAR ROLLER LEVER (RH) ACTUATOR NORM - ANGULAR ROLLER LEVER (RH) ACTUATOR SNAP ANGULAR ROLLER LEVER (LH) ACTUATOR NORM - ANGULAR ROLLER LEVER (LH) ACTUATOR SNAP LONG ROLLER LEVER ACTUATOR NORM - WITH LONG ROLLER LEVER ACTUATOR PC 300 SERIES SNAP - WITH HORIZONTAL ROLLER LEVER ACTUATOR SNAP - WITH VERTICAL ROLLER LEVER ACTUATOR SNAP - WITH PLUNGER ACTUATOR SNAP - WITH ANGULAR LEAF ROLLER LEVER ACTUATOR PC 400 SERIES DOUBLE PLUNGER ACTUATOR PC 500 SERIES SNAP SPECIAL MICRO SWITCH SNAP ACTION 1NO+1NC 501/1NO+1NC DOUBLE ACTION 1NO+1NC 401/1NO+1NC SNAP ACTION SNAP ACTION SNAP ACTION SNAP ACTION 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 301H/1NO+1NC 301V/1NO+1NC 302P/1NO+1NC 303H/1NO+1NC SNAP ACTION NORMAL ACTION SNAP ACTION NORMAL ACTION SNAP ACTION NORMAL ACTION SNAP ACTION NORMAL ACTION SNAP ACTION NORMAL ACTION SNAP ACTION NORMAL ACTION SNAP ACTION SNAP ACTION NORMAL ACTION NORMAL ACTION SNAP ACTION NORMAL ACTION 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 201/1NO+1NC 201/N/1NO+1NC 202/1NO+1NC 202N/1NO+1NC 203/1NO+1NC 203N/1NO+1NC 204/1NO+1NC 204N/1NO+1NC 205/1NO+1NC 205N/1NO+1NC 206/1NO+1NC 206N/1NO+1NC 207/1NO+1NC 207/2/1NO+1NC 207/1N/1NO+1NC 207/2N/1NO+1NC 208/1NO+1NC 208N/1NO+1NC SNAP ACTION SNAP ACTION SNAP ACTION SNAP ACTION 2NO+2NC 2NO+2NC 2NO+2NC 2NO+2NC 101H/2NO+2NC 102V/2NO+2NC 103L/2NO+2NC 104B/2NO+2NC Configuration Catalogue No.

www.LNTEBG.com

9/8

RANGE AND ORDERING INFORMATION

Contacts Description Type PC 600 SERIES SNAP PUSH ROD OPERATOR NORM WITH PUSH ROD OPERATOR EXTE STROKE WITH PUSH ROD OPERATOR OVERLAP WITH PUSH ROD OPERATOR SNAP WITH PUSH ROD AND PROTECTIVE COVER NORM WITH PUSH ROD AND PROTECTIVE COVER EXTE WITH PUSH ROD AND PROTECTIVE COVER OVERLAP WITH PUSH ROD AND PROTECTIVE COVER SNAP WITH PUSH ROD ALUMINIUM HOUSING NORM WITH PUSH ROD ALUMINIUM HOUSING EXTE WITH PUSH ROD ALUMINIUM HOUSING OVERLAP WITH PUSH ROD ALUMINIUM HOUSING SNAP WITH ROLLER - ALUMINIUM HOUSING NORM WITH ROLLER - ALUMINIUM HOUSING EXTE WITH ROLLER - ALUMINIUM HOUSING OVERLAP WITH ROLLER - ALUMINIUM HOUSING SNAP ACTION NORMAL ACTION EXTENDED STROKE OVER-LAPPING SNAP ACTION NORMAL ACTION EXTENDED STROKE OVER-LAPPING SNAP ACTION NORMAL ACTION EXTENDED STROKE OVERLAPPING SNAP ACTION NORMAL ACTION EXTENDED STROKE OVER-LAPPING SNAP ACTION NORMAL ACTION EXTENDED STROKE OVER-LAPPING SNAP ACTION NORMAL ACTION EXTENDED STROKE OVER-LAPPING SNAP ACTION NORMAL ACTION OVER-LAPPING SNAP ACTION NORMAL ACTION SNAP ACTION NORMAL ACTION EXTENDED STROKE OVER-LAPPING SNAP ACTION NORMAL ACTION OVER-LAPPING SNAP ACTION NORMAL ACTION EXTENDED STROKE OVER-LAPPING 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 600/1NO+1NC 600N/1NO+1NC 600NE/1NO+1NC 600NOL/1NO+1NC 600P/1NO+1NC 600NP/1NO+1NC 600NEP/1NO+1NC 600NOLP/1NO+1NC 601/1NO+1NC 601N/1NO+1NC 601NE/1NO+1NC 601NOL/1NO+1NC 602/1NO+1NC 602N/1NO+1NC 602NE/1NO+1NC 602NOL/1NO+1NC 603/1NO+1NC 603N/1NO+1NC 603NE/1NO+1NC 603NOL/1NO+1NC 604/1NO+1NC 604N/1NO+1NC 604NE/1NO+1NC 604NOL/1NO+1NC 605/1NO+1NC 605N/1NO+1NC 605NOL/1NO+1NC 606/1NO+1NC 606N/1NO+1NC 607/1NO+1NC 607N/1NO+1NC 607NE/1NO+1NC 607NOL/1NO+1NC 608/1NO+1NC 608N/1NO+1NC 608NOL/1NO+1NC 609/1NO+1NC 609N/1NO+1NC 609NE/1NO+1NC 609NOL/1NO+1NC Configuration Catalogue No.

SNAP WITH NORMAL ROLLER LEVER AL. HOUSING NORM WITH NORMAL ROLLER LEVER AL. HOUSING EXTE WITH NORMAL ROLLER LEVER AL. HOUSING OVERLAP WITH NORMAL ROLLER LEVER AL. HOUSING SNAP WITH NORMAL ROLLER LEVER AL. HOUSING NORM WITH NORMAL ROLLER LEVER AL. HOUSING EXTE WITH NORMAL ROLLER LEVER AL. HOUSING OVERLAP WITH NORMAL ROLLER LEVER AL. HOUSING SNAP WITH ROTATING ROLLER LEVER AL. HOUSING NORM WITH ROTATING ROLLER LEVER AL. HOUSING OVERLAP WITH ROTATING ROLLER LEVER AL. HOUSING SNAP WITH SPRING NEEDLE ACTUATOR - AL. HOUSING NORM WITH SPRING NEEDLE ACTUATOR - AL. HOUSING SNAP WITH ANGULAR ROLLER LEVER - AL. HOUSING NORM WITH ANGULAR ROLLER LEVER - AL. HOUSING EXTE WITH ANGULAR ROLLER LEVER - AL. HOUSING OVERLAP WITH ANGULAR ROLLER LEVER - AL. HOUSING SNAP WITH LONG ROLLER LEVER - AL. HOUSING NORM WITH LONG ROLLER LEVER - AL. HOUSING OVERLAP WITH LONG ROLLER LEVER - AL. HOUSING SNAP WITH NORMAL ROL. LEVER - AL. HOUSING NORM WITH NORMAL ROL. LEVER - AL. HOUSING EXTE WITH NORMAL ROL. LEVER - AL. HOUSING OVERLAP WITH NORMAL ROL. LEVER - AL. HOUSING
9/9

www.LNTEBG.com

RANGE AND ORDERING INFORMATION

Contacts Description Type PC 700 SERIES TOP PLUNGER TOP PLUNGER WITH ROLLER SIDE PLUNGER SIDE PLUNGER WITH ROLLER ROTARY SHAFT WITH ROLLER LEVER 38mm MULTI-DIRECTION WITH NYLON ROD ROTARY SHAFT WITH STEEL ROD ROTARY SHAFT + FORK LEVER (ROLLER INLINE) ROTARY SHAFT + STEEL ROD (ROLLER OFFSET) ROTARY SHAFT + LONG ROLLER LEVER (76mm) MAINTAINED ROTARY SHAFT + ROL LVR 38mm MAINTAINED ROTARY SHAFT + STEEL ROD MAINTAINED ROTARY SHAFT + FORK LEVER (INLINE) MAINTAINED ROTARY SHAFT + FORK LEVER (OFFSET) MAINTAINED ROTARY + LONG ROL LVR (76mm) MAINTAINED ROTARY SHAFT + ADJ. ROL. LVR PC 900 SERIES NORM + PUSH ROD OPERATOR NORM + PUSH ROD OPERATOR OVERLAP + PUSH ROD OPERATOR OVERLAP + PUSH ROD OPERATOR NORM + PUSH ROD AND PROTECTIVE COVER NORM + PUSH ROD AND PROTECTIVE COVER OVERLAP + PUSH ROD AND PROTECTIVE COVER OVERLAP + PUSH ROD AND PROTECTIVE COVER NORM + PUSH ROD AND STD. AL. HOUSING NORM + PUSH ROD AND STD. AL. HOUSING OVERLAP + PUSH ROD AND STD. AL. HOUSING OVERLAP + PUSH ROD AND STD. AL. HOUSING NORM + NOR. ROL LEVER STD. AL. HOUSING NORM + NOR. ROL LEVER STD. AL. HOUSING OVERLAP + NOR. ROL LEVER STD. AL. HOUSING OVERLAP + NOR. ROL LEVER STD. AL. HOUSING NORM + ANG. ROLLER LEVER STD. AL. HOUSING NORM + ANG. ROLLER LEVER STD. AL. HOUSING OVERLAP + ANG. ROLLER LEVER STD. AL. HOUSING OVERLAP + ANG. ROLLER LEVER STD. AL. HOUSING NORM + ROLLER STD. AL. HOUSING NORM + ROLLER STD. AL. HOUSING OVERLAP + ROLLER STD. AL. HOUSING OVERLAP + ROLLER STD. AL. HOUSING NORMAL ACTION NORMAL ACTION OVER-LAPPING OVER-LAPPING NORMAL ACTION NORMAL ACTION OVER-LAPPING OVER-LAPPING NORMAL ACTION NORMAL ACTION OVER-LAPPING OVER-LAPPING NORMAL ACTION NORMAL ACTION OVER-LAPPING OVER-LAPPING NORMAL ACTION NORMAL ACTION OVER-LAPPING OVER-LAPPING NORMAL ACTION NORMAL ACTION OVER-LAPPING OVER-LAPPING 1NO+2NC 2NO+1NC 1NO+2NC 2NO+1NC 1NO+2NC 2NO+1NC 1NO+2NC 2NO+1NC 1NO+2NC 2NO+1NC 1NO+2NC 2NO+1NC 1NO+2NC 2NO+1NC 1NO+2NC 2NO+1NC 1NO+2NC 2NO+1NC 1NO+2NC 2NO+1NC 1NO+2NC 2NO+1NC 1NO+2NC 2NO+1NC 901N/1NO+2NC 902N/2NO+1NC 901NOL/1NO+2NC 902NOL/2NO+1NC 901NP/1NO+2NC 902NP/2NO+1NC 901NOLP/1NO+2NC 902NOLP/2NO+1NC 901N-1A/1NO+2NC 902N-1A/2NO+1NC 901N-1AOL/1NO+2NC 902N-1AOL/2NO+1NC 901N-3A/1NO+2NC 902N-3A/2NO+1NC 901N-3AOL/1NO+2NC 902N-3AOL/2NO+1NC 901N-7A/1NO+2NC 902N-7A/2NO+1NC 901N-7AOL/1NO+2NC 902N-7AOL/2NO+1NC 901N-10A/1NO+2NC 902N-10A/2NO+1NC 901N-10AOL/1NO+2NC 902N-10AOL/2NO+1NC
9/10

Catalogue No. Configuration

1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC

701/1NO+1NC 702/1NO+1NC 703/1NO+1NC 704/1NO+1NC 705/1NO+1NC 706/1NO+1NC 706/2/1NO+1NC 707/1/1NO+1NC 708/1NO+1NC 709/1NO+1NC 705M/1NO+1NC 706/2M/1NO+1NC 707/1M/1NO+1NC 707/2M/1NO+1NC 708M/1NO+1NC 709M/1NO+1NC

www.LNTEBG.com

RANGE AND ORDERING INFORMATION

Contacts Description Type PC 1000 SERIES SNAP WITH 1.2 KG PRESSURE SWITCH SNAP WITH 1.5 KG PRESSURE SWITCH SNAP WITH 2.5 KG PRESSURE SWITCH SNAP WITH 6.0 KG PRESSURE SWITCH PC 1500 SERIES PRECISION SWITCH WITHOUT OPERATOR PRECISION SWITCH WITHOUT OPERATOR TOP PUSH BUTTON OPERATOR TOP PUSH BUTTON OPERATOR SNAP - TOP PUSH ROLLER OPERATOR (HORIZONTAL) SNAP - TOP PUSH ROLLER OPERATOR (HORIZONTAL) SNAP - TOP PUSH ROLLER OPERATOR (VERTICAL) SNAP - TOP PUSH ROLLER OPERATOR (VERTICAL) 1NO+1NC 2NO+2NC 1NO+1NC 2NO+2NC 1NO+1NC 2NO+2NC 1NO+1NC 2NO+2NC 1NO+1NC 2NO+2NC 1NO+1NC 2NO+2NC 1NO+1NC 2NO+2NC 1NO+1NC 2NO+2NC 1500-1A/1NO+1NC 1500-2A/2NO+2NC 1501-1A/1NO+1NC 1501-2A/2NO+2NC 1502-1AH/1NO+1NC 1502-2AH/2NO+2NC 1502-1AH/1NO+1NC 1502-2AH/2NO+2NC 1503-1AR/1NO+1NC 1503-2AR/2NO+2NC 1503-1AL/1NO+1NC 1503-2AL/2NO+2NC 1504-1AR/1NO+1NC 1504-2AR/2NO+2NC 1504-1AL/1NO+1NC 1504-2AL/2NO+2NC SNAP ACTION SNAP ACTION SNAP ACTION SNAP ACTION 1NO+1NC 1NO+1NC 1NO+1NC 1NO+1NC 1000/12/1NO+1NC 1001/15/1NO+1NC 1001/25/1NO+1NC 1001/6/1NO+1NC Configuration Catalogue No.

SNAP - ROLLER LEVER OPERATOR (RH MOUNTING) SNAP - ROLLER LEVER OPERATOR (RH MOUNTING) SNAP - ROLLER LEVER OPERATOR (LH MOUNTING) SNAP - ROLLER LEVER OPERATOR (LH MOUNTING) SNAP - 6 INCH LEVER OPERATOR (RH MOUNTING) SNAP - 6 INCH LEVER OPERATOR (RH MOUNTING) SNAP - 6 INCH LEVER OPERATOR (LH MOUNTING) SNAP - 6 INCH LEVER OPERATOR (LH MOUNTING)

9/11

www.LNTEBG.com

RANGE AND ORDERING INFORMATION

Description PC 200 SERIES LIMIT SWIT ASSLY (SNAP FOR 200 SERIES) LIMIT SWIT ASSLY (NORMAL FOR 200 SERIES) ACTUATOR WITH ROLLER NORMAL ROLLER LEVER SLIPPING ROLLER LEVER 38MM LEVER WITH ROLLER ANGULAR ROLLER LEVER LONG ROLLER LEVER PC 600 SERIES NORMAL ROLLER LEVER SLIPPING ROLLER LEVER 38mm LEVER WITH ROLLER ANGULAR ROLLER LEVER LONG ROLLER LEVER 38mm LEVER FOR 705 76mm LEVER FOR 708 ADJUSTABLE LEVER FOR 709 FORK TYPE LEVER (INLINE) FORK TYPE LEVER (OFFSET) OPERATING HEAD - LEVER TYPE OPERATING HEAD - TOP PLUNGER OPERATING HEAD - TOP PLUNGER OPERATING HEAD - SIDE PLUNGER OPERATING HEAD - SIDE PLUNGER LIMIT SWITCH ASSLY OIL TIGHT CONDUIT ENTRY PC 900 SERIES NORMAL ROLLER LEVER 603N/609/609N 604N/604 605N/605 607/607N 608/608N 705 708 709 707/1 707/2 LEVER TYPE 701 702 703 704 ALL TYPES ALL TYPES

Contacts

Catalogue No.

ALL TYPE OF 200 SERIES - SNAP ACTION ALL TYPE FO 200 SERIES - NORMAL ACTION 202/202N 203/203N 204/204N 205/205N 207/1, 207/2,, 207/1N & 207/2N 208/208N

200S1 200NS1 200AR 200NLR 200SLR 700L1 200ALR 200LLR

600NLR 600SLR 700L1 600ALR 600LLR 700L1 700L2 700LA 700LF 700LFO 700HTP-B 700HTP-R 700HTP-B 700HSP-B 700HSP-R 700S1 700CE

901N-3A/901N-3A OL 902N-3A/902N-3A OL

600NLR

ANGULAR ROLLER LEVER

901N-7A/901N-7A OL 902N-7A/902N-7A OL

700ALR

www.LNTEBG.com

9/12

TECHNICAL DATA
LIMIT SWITCHES
Confirms to Standard Utilization Category Thermal Current Insulation Voltage Operating Temperature Terminal Capacity Protection Category Mechanical Life Contact Life Head Operating Force IEC 947-5-1 / IS 13947-5 AC 15 and DC 13 Duty 5 Amps & 10 Amps 600 VAC and 250 VDC -20C to 80C 2.5 mm2 solid or stranded IP4X, IP43, IP65 and IP67 according to housing design 15 Million Cycles 10 Million Cycles at 1 Amps rating 300 Gms to 2 Kgs

9/13

www.LNTEBG.com

SALIENT FEATURES OF FOOT SWITCHES

Rubber cushions at bottom provide good support on ground while in operation, thus eliminating additional accessories. Gasket between case and cover and a friction type seal on the treadle shaft / actuator plunger assure water and oil tight performance. Provision to accomodate one contact block on 1NO+1NC contact combination in compact foot switch - PCFS1. Provision to accomodate two contact blocks facilates adjustment of lever assembly and provides simultaneous or differential tripping of the contact blocks in heavy duty foot switch - PCFS2. Domestic Foot Switch - PCFS3 provides a small microswitch for press to ON and release to OFF operations. Meditwin - PCFS4 provides two pedals attached to a single housing and can be operated individually to control two independent contact blocks.

Applications :
Open or close either AC or DC pilot circuits. Enable machine operating sequences to be controlled by foot for industrial, domestic and medical appliances.

www.LNTEBG.com

9/14

ORDERING INFORMATION

Description 1NO+1NC COMPACT TYPE 1NO+1NC (SPDT-SB) DOMSTC TYPE WITH CABLE 1NO+1NC MEDI TWIN 1NO+1NC HEAVY DUTY WITH PLAIN COVER 1NO+1NC HEAVY DUTY WITH PLAIN COVER 1NO+1NC HEAVY DUTY WITH GUARD 1NO+1NC HEAVY DUTY + GUARD 3 POSI 1NO+1NC HEAVY DUTY WITH SHIELD 1NO+1NC HEAVY DUTY WITH SHIELD 3 POSI 1NO+1NC HEAVY DUTY WITH PLAIN COVER 3 POSI 1NO+1NC HEAVY DUTY WITH GUARD 1NO+1NC HEAVY DUTY WITH SHIELD 1NO+1NC HEAVY DUTY WITH PLAIN COVER

Catalogue No. FS-1/ONE FS-3/ONE FS-4/TWO FS-2/H1/ONE FS-2/H11/TWO FS-2/H11G/TWO FS-2/H11GZ/TWO FS-2/H11S/TWO FS-2/H11SZ/TWO FS-2/H11Z/TWO FS-2/H1G/ONE FS-2/H1S/ONE FS-2/P1/ONE FS-2/P11/TWO FS-2/P11G/TWO FS-2/P11GZ/TWO FS-2/P11S/TWO FS-2/P11SZ/TWO FS-2/P11Z/TWO FS-2/P1G/ONE FS-2/P1S/ONE FS-2/P2/ONE FS-2/P22/TWO FS-2/P22G/TWO FS-2/P22GZ/TWO FS-2/P22S/TWO FS-2/P22SZ/TWO FS-2/P22Z/TWO FS-2/P2G/ONE FS-2/P2S/ONE FSR50FL

1NO+1NC HEAVY DUTY WITH PLAIN COVER 1NO+1NC HEAVY DUTY WITH GUARD 1NO+1NC HEAVY DUTY WITH GUARD 3 POSI 1NO+1NC HEAVY DUTY WITH SHIELD 1NO+1NC HEAVY DUTY WITH SHIELD 3 POSI 1NO+1NC HEAVY DUTY WITH PLAIN COVER 1NO+1NC HEAVY DUTY WITH GUARD 1NO+1NC HEAVY DUTY WITH SHIELD 2NO+2NC HEAVY DUTY WITH PLAIN COVER 2NO+2NC HEAVY DUTY WITH PLAIN COVER 2NO+2NC HEAVY DUTY WITH GUARD 2NO+2NC HEAVY DUTY WITH GUARD 3 POSI 2NO+2NC HEAVY DUTY WITH SHIELD 2NO+2NC HEAVY DUTY WITH SHIELD 3 POSI 2NO+2NC HEAVY DUTY WITH PLAIN COVER 2NO+2NC HEAVY DUTY WITH GUARD 2NO+2NC HEAVY DUTY WITH GUARD 2NO+2NC HEAVY DUTY WITH SWITCH

9/15

www.LNTEBG.com

TECHNICAL DATA
FOOT SWITCHES
Type of Foot switch Type of contact block Utilization category PCFS1 PC600 AC 15 DC 13 Thermal Current Ith Insulation Voltage Ui Contact Combination 10 A 500V AC 1 NO + 1NC SPDT - DB* Terminal Capacity Enclosure Category Mech. & Electrical Life 2.5 sq. mm IP65 5 x 106 PCFS2 PC600 or PC1500 AC 15 DC 13 10 A 500V/600V AC 1 NO + 1 NC or 2NO + 2NC 2.5 sq. mm IP65 5 x 106 PCFS3 Micro switch AC 15 DC 13 10 A 250V AC 1 NO + 1NC SPDT - SB** 2.5 sq. mm IP43 5 x 106 PCFS4 PC600 AC 15 DC 13 10 A 500V AC 1 NO + 1 NC SPDT - DB* 2.5 sq. mm IP65 5 x 106

www.LNTEBG.com

9/16

SALIENT FEATURES OF TIMERS

Time delay is independent of normal voltage and temperature fluctuations. Large transparent knob on a graduated dial enables accurate time setting. Black pointer gives clear indication of time set on a calibrated dial while the red one indicates the time left to complete the cycle. Longer life of contacts is ensured by output through a relay. All contacts are made of hard silver. Automatic reset on de-energisation of the clutch coil. Micro size synchronous motor is provided with specially made sintered bearings, well lubricated for noiseless operation. All parts subjected to constant wear and tear are moulded of Delrin to ensure longer life. Base mounting or flush mounting versions. The synchronous timer is enclosed in a poly-carbonate enclosure, has compact dimensions and provides protection conforming to IP30 of IS:13947.

(Manufactured by General Industrial Controls Private Limited)

9/17

www.LNTEBG.com

RANGE AND ORDERING INFORMATION

Compact DIN rail mountable. Wide operating voltage range. High setting and repeat accuracy. Wide time setting. Low power consumption. Universal mounting.

ELECTRONIC TIMER TRUE - OFF DELAY

Description Qty per packing [No.] Catalogue No.

Electronic Timer True - Off Delay - 110V AC Electronic Timer True - Off Delay - 240V AC

1 1

21TDT0 22TDT0

MICON ELECTRONIC TIMERS

Description Qty per packing [No.] Catalogue No.

Electronic Timer Series 175 - 110V AC Electronic Timer Series 175 - 240V AC

1 1

110DT4 120DT4

SERIES 175

Electronic Timer Series 225 - Asymmetrical ON/OFF Electronic Timer Series 225 - Star-Delta Electronic Timer Series 225 - Multifunction SERIES 225

1 1 1

24ADT0 20SDT0 20MDT0

Electronic Timer Series 480 - Asymmetrical ON/OFF Electronic Timer Series 480 - Star-Delta Electronic Timer Series 480 - Multifunction SERIES 480 Electronic Timer Series 780 - Asymmetrical ON/OFF - 110/240V AC Electronic Timer Series 780 - Asymmetrical ON/OFF - 240/415V AC Electronic Timer Series 780 - Star-Delta - 110/240V AC Electronic Timer Series 780 - Star-Delta - 240/415V AC Electronic Timer Series 780 - Multifunction - 110/240V AC SERIES 780 Electronic Timer Series 780 - Multifunction - 240/415V AC

1 1 1

40AFS0 40SFS0 40MFS0

1 1 1 1 1 1

70ADT0 74ADT0 70SDT0 74SDT0 70MDT0 74MDT0

www.LNTEBG.com

9/18

ACCESSORIES
Accessory Type Description Qty per packing [No.] Wt approx per Timer [Kg] Catalogue No.

11 pin Universal Socket for Electronic Timers

0.048

FF9601

Universal Socket

9/19

www.LNTEBG.com

RANGE AND ORDERING INFORMATION

ELECTRO MECHANICAL TIMING DEVICES
ON Delay Type, 240V AC 6A (Resistive). Base and DIN Rail mounting. AUTO-RESET SYNCHRONOUS TIMER Description Qty per packing [No.] 1 Wt approx per Timer [Kg] 0.6 Catalogue No.

ON Delay Auto Reset Synchronous Timer Single Range ON Delay Auto Reset Synchronous Timer Multi Range 240V 1 Inst + 1 Del C/O Flush Mounting Standard On Delay EM 1000 ON Delay Auto Reset Synchronous Timer Multi Range in any other configuration other than above

8 1

0.6 0.6

B B

41F10008

CATALOGUE NO. SUFFIXES FOR AUTO-RESET SYNCHRONOUS TIMER - EM 1000

AUTO-RESET SYNCHRONOUS TIMER

Description

Qty per packing [No.]

Wt approx per Timer [Kg]

Catalogue No.

ON Delay Auto Reset Synchronous Timer

0.3

B1

EM 2000

CATALOGUE NO. SUFFIXES FOR AUTO-RESET SYNCHRONOUS TIMER - EM 2000

www.LNTEBG.com

9/20

RANGE AND ORDERING INFORMATION

ELECTRO MECHANICAL TIMING DEVICES
Precision time counter with a white digit register which indicates the whole hour and a red digit register which indicates hundredth and tenth of an hour. Fully insulated plastic enclosure with IP 54 protection. Flush Mounting (in 45x45mm cutout) with metallic bracket/base. Compact construction. HOUR METERS Description Qty per packing [No.] 1 1 1 1 1 1 1 Wt approx per Timer [Kg] 0.085 0.085 0.085 0.085 0.085 0.085 0.085 Catalogue No.

HM 700

HM 700 Synchronous for 240V or 110V AC Control Supply HM 700 Synchronous for 24V AC Control Supply HM 700 Synchronous for 415V AC Control Supply HM 700 Quartz for 12-36V DC Control Supply HM 700 Quartz for 6-12V or 36-80V DC Control Supply HM 700 Quartz for 110V DC Control Supply HM 700 Quartz for 220V DC Control Supply

E5 S E51S E55S E61Q E6 Q E63Q E64Q

1 1 1 1 1 1 1

HM 48 Synchronous for AC Control Supply

0.070

K5

HM 48

9 ACCESSORIES
Description Qty per packing [No.] 1 1 1 1 Wt approx per Timer [Kg] Catalogue No.

For HM 700

Mounting frame size 55x55mm Mounting frame size 72x72mm Vibration proof buffer with mounting Base mounting bracket

EF1900 EF1901 EF9000 EF2002

CATALOGUE NO. SUFFIXES FOR HOUR METERS

9/21

www.LNTEBG.com

RANGE AND ORDERING INFORMATION

TIME SWITCHES - TYPE FM/1
1 set of changeover, 240V AC, 16A (Resistive). Enclosure IP 55 with gland plate and locking arrangement. Modular construction. Power reserve upto 150 hrs. Inbuilt over-ride facility. High switching capacity. Analog and Digital versions. Tamper proof sealing. Description Catalogue No. Flush Mounting One daily dial, 240V AC - QT One weekly dial, 240V AC - QW One daily dial 110V AC - QT FM/1 QT, QW One weekly dial 110V AC - QW J648F1 J848F1 J638F1 J838F1 Base/DIN Rail Mounting J648B1 J848B1 J638B1 J838B1

UNIVERSAL TIME SWITCHES

Digital 240V AC

D847F1

D847B1

Digital 110V AC FM/1 digi20

D837F1

D837B1

ACCESSORIES
Description Catalogue No.

Enclosure for Time Switch

A648B1WE

FM/1 WE

www.LNTEBG.com

9/22

TECHNICAL DATA
ELECTRONIC TIMERS
Type True - Off Delay Series 175

Range

0.3 min. - 3 min.

3 sec. - 30 hrs.

Operating Voltage Range

110V AC / 240V AC

110V AC / 240V AC

Contact Output

1 C/o. - AgCdO

1 C/o. - AgCdO

Contact Rating

10A, 240V AC / 28V DC

5A, 240V AC / 28V DC

Indication

Power ON LED

LED for power ON and relay status

Mounting

Base / DIN rail

Base / DIN rail

MICON ELECTRONIC TIMERS SERIES - 225, 480 & 780

Type Range Pause Time Operating Voltage Range for series 225 and 480 for series 780 Contact Output for series 225 for series 480 for series 780 Contact Rating for series 225 and 480 for series 780 Indication 5A, 240V AC / 28V DC 10A, 240V AC / 28V DC LED for power ON and relay status Mounting for series 225 and 780 for series 480 Base / DIN rail Base / DIN rail with 11 pin Universal socket Flush Mounting with Solderable Socket Base / DIN rail Base / DIN rail with 11 pin Universal socket Flush Mounting with Solderable Socket Base / DIN rail Base / DIN rail with 11 pin Universal socket Flush Mounting with Solderable Socket 5A, 240V AC / 28V DC 10A, 240V AC / 28V DC LED for star & delta indication 5A, 240V AC / 28V DC 10A, 240V AC / 28V DC LED for power ON relay status 1 C/o - AgCdO 2 C/o - AgCdO 1 Inst + 1 Dly - AgCdO 1 NO () + 1NO () - AgCdO 1 NO () + 1NO () - AgCdO 1 NO () + 1NO () - AgCdO 1 C/o - AgCdO 2 C/o - AgCdO 1 Inst + 1 Dly - AgCdO 24V - 240V AC/DC 110/240V AC, 240/415V AC 110 & 240V AC 110/240V AC, 240/415V AC 24V - 240V AC/DC 110/240V AC, 240/415V AC Asymmetrical ON/OFF 0.1 sec. - 10 hrs. Star-Delta 0.3 sec. - 120 sec. 60, 90, 120, 150 msec. Multifunction 0.1 sec. - 10 hrs.

9/23

www.LNTEBG.com

TECHNICAL DATA
AUTO-RESET SYNCHRONOUS TIMER
Type EM 1000 EM 2000

Type of delay

ON DELAY

ON DELAY

Voltage range

-20% - +10%

80% - 110% of nominal

Frequency range

95% - 105%

95% - 105%

Maximum frequency of operations per hour

3000

1000

Pointer reset time

250 m sec at max. setting

Less than 4% of set time

Ambient service temperature

-5C to +45C

-5C to +45C

Protection

Enclosure - IP 30 - IS:13947

Enclosure - IP 30 - IS:13947

VA Rating - AC Loads Cos 0.7 - 1.0 24V 48V 110V 240V Cos 0.4 - 0.7 24V 48V 110V 240V 150 250 500 500 50 80 150 200 120 240 500 500 40 75 150 200

VA Rating - DC Loads Non-inductive 24V 48V 110V 220V Inductive 24V 48V 110V 220V 100 100 80 80 30 50 40 40 85 85 65 65 24 40 30 30

www.LNTEBG.com

9/24

TECHNICAL DATA
HOUR METERS
Type HM 48 HM700 AC Model Synchronous Voltage Range 80% - 110% 80% - 110% DC Model Quartz 80% - 110%

Drive

Synchronous Motor

Synchronous Motor

Stepper Motor (Controlled by quartz crystal)

Consumption

1 VA

5 VA

2W

Register

7 digit (2 decimal)

7 digit (2 decimal)

7 digit (1 decimal)

Read out

999999.99

99,999.99

999999.9

Least count

1/100 hrs.

1/100 hrs.

1/10 hrs.

Accuracy

Directly proportional to supply frequency

Directly proportional to supply frequency

+/-1.0 sec./24 Hrs. at 25C

Vibration

10 to 2000 Hz with 0.5 g

10 to 50 Hz, amplitude 0.35mm 10 to 50 Hz, amplitude 0.35mm

Shocks

50 blows at acceleration 7 g for 50 blows at acceleration 7 g for vibration proof buffer mounting vibration proof buffer mounting

Protection

IP 20

IP 54 as per IS 13947, double insulation

IP 54 as per IS 13947, double insulation

Ambient Service Temperature

20C to +55C

-5C to +45C

-5C to +45C

9/25

www.LNTEBG.com

TECHNICAL DATA
TIME SWITCHES - TYPE FM/1
Type FM/1 Quartz FM/1 Digi

Operating Voltage

240V AC

240V AC

Supply Frequency

45 - 65 Hz

45 - 65 Hz

Power consumption

2 VA

4.4 VA

Ambient Service Temperature

-20C to +55C

-10C to +55C

Clock accuracy

2.5 Sec./day at 20C

2.5 Sec./day at 20C

Switching contact

1 C/o contact - AgCdO

1 C/o contact - AgCdO

Charging period

70 hrs.

140 hrs.

Shortest Switching Time: - Daily - Weekly 15 min. 2 hrs. 1 min. 1 min.

Memory locations

20

Contact rating : - Resistive - Inductive (cos=0.6) - Incandescent Lamp 16A / 250V AC 8A / 250V AC 1350 W 16A / 250V AC 8A / 250V AC 1000 W

Manual Over-ride

Provided

Provided

Mounting

Flush, Base / DIN rail

Flush, Base / DIN rail

www.LNTEBG.com

9/26

SALIENT FEATURES
MODULAR REMOTE CONTROL UNITS

Elegant and light weight. Measuring high standards of reliability. Components are made of superior grade of engineering plastics which enhances mechanical life. Specially devised mounting arrangement reduces mounting time. Modular blocks are snap fit and allow various contact combinations.

(Manufactured by Esbee Industrial Combines)

9/27

www.LNTEBG.com

RANGE AND ORDERING INFORMATION

PUSH BUTTON ACTUATORS 22.5 mm
Actuator Type Description Catalogue No.*

Flush Head (Non Illuminated)

HD15C

Flush Head (Illuminated)

HD16C

Projecting Head Push Function (Non Illuminated) Projecting Head Push Function (Illuminated)

HD45C HD46C

Projecting Head Push-Push Function (Non Illuminated)

HF45C

Projecting Head Push-Push Function (Illuminated)

HF46C

Mushroom Head Push Function (Non Illuminated)

HD55C

Mushroom Head Push Turn (Non Illuminated)

HH55C

9
Mushroom Head with Lock & Key (Non Illuminated) HQ55C

Mushroom Head Push Pull (Non Illuminated)

HG55B

Twin Touch (Non Illuminated)

HD15GO

Twin Touch with Pilot Lamp (Illuminated)

HD16G

Tip Head (Non Illuminated)

HP95C

Lock & Key (Push Turn)

HH85C3

* For colour code suffix refer page 9/31

www.LNTEBG.com

9/28

RANGE AND ORDERING INFORMATION

SELECTOR ACTUATORS
Actuator Type Description Catalogue No.*

Symmetric Head (Non Illuminated)

65C

Symmetric Head (Illuminated)

66C

Lever Head (Non Illuminated)

75C

Lock & Key Rotary Type (Non Illuminated)

85C3

* For position and colour code of selector actuator suffix refer page 9/32

9
2 POSITION Non Spring Return

POSITIONS OF SELECTOR ACTUATORS

3 POSITION Non Spring Return Spring Return Spring Return From L.H. Spring Return From R.H.

Spring Return

9/29

www.LNTEBG.com

ACCESSORIES

SHROUD

Colour

Catalogue No.

Red Green Black Yellow For Selector Actuator BLANKING PLUGS Colourless

HH152002 HH153003 HH154004 HH155005 HH150100

Colour

Catalogue No.

Grey Black For Push Button Actuator COLLAR Chrome Plated ABS

HH180002 HH182009 HH196010

Colour

Catalogue No.

9
Black Chrome Plated ABS For Flush/Projecting Head Push Button ADAPTOR RING Chrome Plated Brass HB192000 HB196000 HB326000

Colour

Catalogue No.

Grey Black For 30 to 22mm in Panel cutout conversion CENTER INDICATION STRIP Chrome Plated ABS

HH180000 HH182004 HH196006

Colour

Catalogue No.

Black Yellow Orange For Twin Touch Push Button Colourless

HB10258 HB105163 HB108169 HB100161

www.LNTEBG.com

9/30

SPARES
Catalogue No. LENS CAP Colour Non Illuminated Red Green Black Yellow White / Opal Blue Orange Colourless HB103002 HB104000 HB102006 HB105008 HB101004 HB107010 HB108012 Not Available Illuminated HB103103 HB104101 Not Available HB105109 HB101105 HB107111 HB108113 HB100107

Catalogue No. Suffixes

PUSH BUTTON ACTUATORS
ORDERING INFORMATION:
Example: a) With Black ABS Collar Catalogue No. is HD15C1 b) With Chrome Plated ABS Collar (replace C by A) Catalogue No. is HD15A1 c) With Chrome Plated Brass Collar (replace C by B) Catalogue No. is HD15B1 For Flush Head Non-Illuminated Red Actuator Catalogue No. is HD15C1 Colour Code Suffix Colour Code Flush/Projecting Head Illuminated Red Green Black Yellow White / Opal Blue Orange Colourless 1 2 4 5 6 7 8 Non-Illuminated 1 2 3 4 5 6 7 Mushroom Head Non-Illuminated 1 2 3 4 Twin Touch with centre Indication Illuminated 4 7 8 Tip Head Non-Illuminated 1 2 3 5 -

SELECTOR ACTUATORS
ORDERING INFORMATION:
For Symmetric Head (Non-Illuminated) Last Digit only three colours available : Red-1, Black-3 & White/Opal-5 For Symmetric Head (Illuminated) Last Digit only four colours available : Red-1, Green-2, White/Opal-5 & Colourless-8 For Lever Head (Non-Illuminated) Last Digit only two colours available : Black-3 & White/Opal-5 Position of Selector Actuator 2 Position Spring Return 3 Position Spring Return 2 Position Non Spring Return Second Digit of Catalogue No. I J K Position of Selector Actuator 3 Position Non Spring Return 3 Position Spring Return from L.H. Side 3 Position Spring Return from R.H. Side Second Digit of Catalogue No. L M N

9/31

www.LNTEBG.com

RANGE AND ORDERING INFORMATION

INDICATORS 22.5 mm
MODULAR INDICATORS Description Catalogue No.*

Ribbed Lens (With Trim Collar)

HB07E

Ribbed Lens (Without Trim Collar) * For colour code suffix refer page 9/33

HB07F

INTEGRAL INDICATORS

Description

Catalogue No.*

Ribbed Lens (With Trim Collar)

HS03E

Ribbed Lens (Without Trim Collar)

HS03F

Ribbed Lens (With Trim Collar) - 240V

HV03E

Ribbed Lens (Without Trim Collar) - 240V * For supply voltage and colour code suffix refer page 9/33

HV03F

Catalogue No. LED INDICATORS Colour Red Green Yellow Blue Orange 240V HS03F1X1 HS03F2X1 HS03F4X1 HS03F6X1 HS03F7X1 AC 110V HS03F1W1 HS03F2W1 HS03F4W1 HS03F6W1 HS03F7W1 48V HS03F1V1 HS03F2V1 HS03F4V1 HS03F6V1 HS03F7V1 AC/DC 24V HS03F1U1 HS03F2U1 HS03F4U1 HS03F6U1 HS03F7U1 12V HS03F1T1 HS03F2T1 HS03F4T1 HS03F6T1 HS03F7T1

LED INDICATORS (LOW VOLTAGE GLOW PROTECTION) Red Green Yellow Blue Orange

Catalogue No. Colour 240V HW03F1X1 HW03F2X1 HW03F4X1 HW03F6X1 HW03F7X1 AC 110V HW03F1W1 HW03F2W1 HW03F4W1 HW03F6W1 HW03F7W1

Note : 110V/220Vdc LED Indicators available on request.

www.LNTEBG.com

9/32

ACCESSORIES
FILAMENT LAMPS 6V AC/DC 12V AC/DC 24V AC/DC 48V AC/DC BA 9S type FIXING DEVICE 130V AC/DC Description Description Catalogue No. HC550001 HC550002 HC550003 HC550004 HC550005 Catalogue No.

HH192000

LAMP EXTRACTOR

Description

Catalogue No.

HH157000

9
RIBBED LENS Red Green Yellow Opal Blue Orange Colourless

SPARES
Catalogue No. Colour With Trim Collar HE903108 HE904109 HE905110 HE901111 HE907112 HE908113 HE900101 Without Trim Collar HE103108 HE104109 HE105110 HE101111 HE107112 HE108113 HE100101

Catalogue No. Suffixes

Colour Code Red Green Yellow White/Opal Blue Orange Colourless 6th Digit of Catalogue No. Suffix used 1 2 4 5 6 7 8 Supply Voltage for 6V AC 12V AC 24V AC 48V AC 110V AC Indicator 7th Digit of Catalogue No. Suffix used S T U V W

9/33

www.LNTEBG.com

RANGE AND ORDERING INFORMATION

MODULAR CONTACT BLOCK
MODULAR CONTACT BLOCK NO Blocks Description Catalogue No. HC61A2

NC Blocks MODULAR BLOCKS (Bulb holders with series 6V,2W AC/DC 12V,2W AC/DC 24V,2W AC/DC 48V,2W AC/DC 130V,20mA AC/DC MODULAR BLOCKS (Bulb holders with inbuilt Resistor & Diode) Description

HC61B2

resistor)

Description Catalogue No. HC61S1 HC61T1 HC61U1 HC61V1 HC61W1 Catalogue No.

130V,20mA AC/DC - 240V AC Supply

HC61X1

MODULAR BLOCKS (Bulb holders without Resistor/

Diode)

Description Catalogue No.

6-110V AC/DC Supply

HC61R1

ACCESSORIES
CLIPS First Row Clip (For Mounting) Second Row Clip (For Vertical Cascading) Side Row Clip (For Horizontal Cascading) TRANSFORMER BLOCK 110V, 6V, 1VA 240V, 6V, 1VA 110V, 12V, 1VA 240V, 12V, 1VA DUMMY BLOCK Description Description Description Catalogue No. HC922002 HC122030 HC929002 Catalogue No. HC51W1 HC51X1 HC52W1 HC52X1 Catalogue No.

Dummy Block To be used with Transformer Block

HC71C2

www.LNTEBG.com

9/34

RANGE AND ORDERING INFORMATION

PUSH BUTTON STATIONS
Station Type Description Catalogue No.

Flush Head Actuator - Red, with legend - STOP , Contact - 1 NC

JAA10000

Flush Head Actuator - Green, with legend - START, Contact - 1 NO

JAB20000

Illuminated Actuator - Red, with legend - OFF, Contact - 1 NC Bulb Holder with Bulb 240V AC

JAC50000

Illuminated Actuator - Green, with legend - ON, Contact - 1 NO Bulb Holder with Bulb 240V AC

JAD60000

Two Position Symmetric Head Selector Switch - Black, with legend - OFF / ON,

JAH20000

Contact - 1 NO

Two Position Lock and Key Rotary Switch, with legend - OFF / ON, Contact - 1 NO

JAI20000

Mushroom Head Actuator Push Function on Yellow Cover, with legend - STOP , Contact - 1 NC for Emergency Stop

JAE10000

Mushroom Head Actuator Push Turn Type on Yellow Cover, with legend - STOP , Contact - 1 NC for Emergency Stop

JAF10000

9/35

www.LNTEBG.com

RANGE AND ORDERING INFORMATION

PUSH BUTTON STATIONS
Station Type Description Catalogue No.

Mushroom Head Actuator Push Pull Type on Yellow Cover, with legend - STOP , Contact - 1 NC for Emergency Stop

JAJ10000

Mushroom Head Actuator with Lock and Key on Yellow Cover, with legend - STOP , Contact - 1 NC for Emergency Stop

JAG10000

Flush Head Actuator - Green, with legend - START, Contact - 1 NO (Station One) JBB2A100 Flush Head Actuator - Red, with legend - STOP , Contact - 1 NC (Station Two)

9
JCZ4B2A1

Pilot Light 240V AC, Colourless Lens (Station One) Flush Head Actuator - Green, with Legend - START, Contact - 1 NO (Station Two) JBB2F100 Flush Head Actuator - Red, with Legend - STOP , Contact - 1 NC (Station Three) Flush Head Actuator - Green, with Legend - FORWARD, Contact - 1 NO (Station One) Flush Head Actuator - Red, with Legend - STOP , Contact - 1 NC (Station Two) Flush Head Actuator - Green, with Legend - REVERSE, Contact - 1 NO (Station Three) Flush Head Actuator - Green, with Legend - UP , Contact - 1 NO (Station One) Flush Head Actuator - Red, with Legend - STOP , Contact - 1 NC (Station Two) Flush Head Actuator - Green, with Legend - DOWN, Contact - 1 NO (Station Three) JEB2A1B2 JDB2A1B2

www.LNTEBG.com

9/36

ACCESSORIES

GENERAL PURPOSE ENCLOSURES All Grey without hole All Grey & 1 hole of 22.5 All Grey & 2 holes of 22.5

Description

Catalogue No.

HF999000 HF999001 HF999002 HF993100

Translucent Red cover without hole and grey base PUSH BUTTON STATION ENCLOSURES All Grey single hole All Grey & 2 holes of 22.5 All Grey & 3 holes of 22.5 Single hole yellow cover & grey base METAL PLATES Description OFF-ON FORW. - OFF-REV. Small HAND - OFF - AUTO STOP - START Large FAST - OFF - SLOW O-I Square CONTACT BLOCK I - O - II HH242005 HH242006 HH242007 Description HH242020 HH242021 HH242022 HH242003 HH242004 HH242018 HH242019 Catalogue No. Small HH242001 HH242002 Large HH242016 HH242017

Description

Catalogue No.

HF999004 HF999005 HF999003 HF995001

Square HH242031 HH242032 HH242033 HH242034 HH242035 HH242036 HH242037 Catalogue No.

NO Contact Block

HC22A2

NC Contact Block

HC22B2

For Push Button Stations

1NO + 1NC Contact Block NO Contact Block NC Contact Block 2NO Contact Block

HC22C2 HC22N1 HC22O1 HC22D2 HC22E2

For Bulb Holder with Bulb 240V AC+Contact Block

2NC Contact Block

9/37

www.LNTEBG.com

RANGE AND ORDERING INFORMATION

PUSH BUTTON ACTUATORS 30 mm - TYPE TK3
Actuator Type Description Shrouded Push Button Actuator - Black colour Shrouded Push Button Actuator - Red colour Shrouded Push Button Actuator - Green colour Shrouded Push Button Actuator - Yellow colour Shrouded Push Button Actuator - Blue colour Shrouded Push Button Actuator - Grey colour Catalogue No. SS91519OAOO SS91519OBOO SS91519OCOO SS91519ODOO SS91519OEOO SS91519OFOO

Selector Actuator - Two-position switch

SS91516OAOO

Selector Actuator - Three-position switch

SS91517OAOO

Mushroom Push Button Actuator - Black colour Mushroom Push Button Actuator - Red colour Mushroom Push Button Actuator - Green colour Unshrouded Push Button Actuator - Black colour Unshrouded Push Button Actuator - Red colour Unshrouded Push Button Actuator - Green colour Unshrouded Push Button Actuator - Yellow colour Unshrouded Push Button Actuator - Blue colour Unshrouded Push Button Actuator - Grey colour

SS91518OAOO SS91518OBOO SS91518OCOO SS91520OAOO SS91520OBOO SS91520OCOO SS91520ODOO SS91520OEOO SS91520OFOO

Key Actuator - Lockable OUT and IN positions

SS91521OOOO

Key Actuator - Lockable OUT position

SS91522OOOO

ACCESSORIES
Accessory Type Rubber Cap Latching Device Description With fixing ring in red, green and black colours For unshrouded push buttons Start Stop Forward Reverse Legend Plate Fast Slow ON OFF Raise Lower Blank plate with single line space Blank plate with double line space Catalogue No. SS91540OOOO SS91539OOOO SS00597OOOO SS00598OOOO SS00599OOOO SS00600OOOO SS00601OOOO SS00602OOOO SS00603OOOO SS00604OOOO SS00605OOOO SS00606OOOO SS00596OOOO SS00607OOOO
9/38

www.LNTEBG.com

RANGE AND ORDERING INFORMATION

PUSH BUTTON PENDANTS
Ideally suited for control of cranes, hoists, trolleys and machine tools. Interchangeability of two push button units to four or six units on site. Buttons are completely shrouded and cannot be operated accidentally. Enclosure of pendant, is oil and acid resistant, impact proof and insulated. Wt approx per Pendant [Kg]

Type

Description

Catalogue No.

2 Unit Push Buttons Pendant

0.30

SS90502OOOO

4 Unit Push Buttons Pendant

0.55

SS90504OOOO

6 Unit Push Buttons Pendant

0.80

SS90506OOOO

9/39

www.LNTEBG.com

TECHNICAL DATA
ACTUATOR, INDICATORS, MODULAR & FRONT CONNECTION BLOCKS

www.LNTEBG.com

9/40

TECHNICAL DATA
LED INDICATORS
Rated Voltage 12 V Ac /Dc, 24 V Ac / Dc, 48 V Ac / Dc 110 V Ac, 240 V Ac 50/60 Hz. (110 Dc / 220V Dc) Operating Voltage Power Consumption Insulation Resistance Dielectric Strength Operating Temp. Storage Temp. Indicator Colours Panel Cut-out Required Overall Dimension Weight -20% To +10% Of Rated Voltage 9VA Max. 100 M W At 500 V Dc 1.5 Kv Ac -10C To 55C -25C To 70C Red, Green, Yellow, Blue, Orange, White. F 22.5 Mm F 29 X 70 Mm (Approximately) 25 Grms. Ip 30 - (For Terminals) Ip 65 - (Top Surface Of Indicators) Life 1,00,000 (Burning Hrs.)

Ingress Protection

9/41

www.LNTEBG.com

TECHNICAL DATA
PUSH BUTTON STATIONS & GENERAL PURPOSE ENCLOSURES

www.LNTEBG.com

9/42

OVERALL DIMENSIONS
CABLE DUCTS

STANDARD SLOT

THIN SLOT

BOTTOM MOUNTING SLOTS FOR ALL SIZES

TYPE A

BOTTOM SLOTS FOR B25

BOTTOM SLOTS FOR B80

BOTTOM SLOTS FOR B40 AND B60

BOTTOM SLOTS FOR B150

TYPE B
Note: All dimensions are in mm.
9/43

www.LNTEBG.com

OVERALL DIMENSIONS
LIMIT SWITCHES
100 SERIES

101H

102V

103LS

104B

300 SERIES

9
301H 301V 302P 303

200AR

200NLR

200SLR

200 SERIES

200 ALR

200 LLR

206

205 SERIES Note: All dimensions are in mm.

401

www.LNTEBG.com

9/44

OVERALL DIMENSIONS
LIMIT SWITCHES

600 SERIES

600 LLR

900 SERIES

901 N - 10A

700 L1 (200,600,700) 605 SERIES

700 L2 (600 & 700)

700 LA (600 & 700)

705 SERIES

700 LF (600 & 700)

700 LF0 (600 & 700)

700 SN (700)

700 SERIES Note: All dimensions are in mm.

9/45

700 HTPB

700 HTPR

700 HSPB

700 HSPR

www.LNTEBG.com

OVERALL DIMENSIONS
LIMIT SWITCHES

ROLLER LEVER OPERATOR

2NO+2NC PC 1500 SERIES Note: All dimensions are in mm.

TOP PUSH BUTTON OPERATOR

TOP PUSH ROLLER OPERATOR (HOR)

9 INCH LEVER OPERATOR

www.LNTEBG.com

9/46

OVERALL DIMENSIONS
FOOT SWITCHES

PCFS-1 COMPACT TYPE

PCFS-3 DOMESTIC TYPE

PCFS-4 MEDI TWIN

PCFS-2 HEAVY DUTY GUARD Note: All dimensions are in mm.

PCFS-2 HEAVY DUTY SHIELD

9/47

www.LNTEBG.com

OVERALL DIMENSIONS
ELECTRONIC TIMERS

TRUE OFF DELAY - BASE / DIN MOUNTING

MICON SERIES 175 - BASE / DIN MOUNTING

MICON SERIES 225 - BASE / DIN MOUNTING

MICON SERIES 480 - FLUSH MOUNTING

Note: All dimensions are in mm.

MICON SERIES 780 - BASE / DIN MOUNTING

9/48

www.LNTEBG.com

OVERALL DIMENSIONS
ELECTRO MECHANICAL TIMING DEVICES

Note: Panel Cutout 91mm Diameter

EM 1000 - Flush Mounting

EM 1000 - Base Mounting

EM 2000
Note: All dimensions are in mm.
9/49

www.LNTEBG.com

OVERALL DIMENSIONS
HOUR METERS

Panel cut-out

Panel cut-out

PANEL (FLUSH) MOUNTING

MOUNTING FRAMES 55 x 55 or 72 x 72 mm.

HM 48

Mounting holes plan Panel Cut-out

BASE (WALL) MOUNTING VIBRATION PROOF MOUNTING

HM 700

TIME SWITCHES

BASE/DIN MOUNTING Note: All dimensions are in mm.

FLUSH MOUNTING

www.LNTEBG.com

9/50

OVERALL DIMENSIONS
PUSH BUTTON ACTUATORS 22.5 mm

Flush Head

Projecting Head Push Function Projecting Head Push-Push Function Mushroom Head Push Function

Mushroom Head Push Turn

Mushroom Head with Lock & Key

Mushroom Head Push Pull

Twin Touch

Twin Touch with Pilot Lamp

Tip Head

Lock & Key

SELECTOR ACTUATORS 22.5 mm

Symmetric Head Note: All dimensions are in mm.

9/51

Lever Head

Lock & Key Rotary Type

www.LNTEBG.com

OVERALL DIMENSIONS
INDICATORS

Modular Indicators Note: All dimensions are in mm.

Integral Indicators

Integral Indicators (240V)

www.LNTEBG.com

9/52

OVERALL DIMENSIONS
PUSH BUTTON ACTUATORS 30 mm - TYPE TK3

DRILLING PLAN

Description Key Actuator Unshrouded Actuator

L 49 35 28 33.5 49

P 34.5 (w/o key) 20.5 13.5 19 29.5

Shrouded Actuator Mushroom Actuator Selector Actuator

Note: All dimensions are in mm.

9/53

www.LNTEBG.com

OVERALL DIMENSIONS
PUSH BUTTON PENDANTS

Description 2 Unit Push Buttons Pendant 4 Unit Push Buttons Pendant 6 Unit Push Buttons Pendant

A 159 273 391

Note: All dimensions are in mm.

www.LNTEBG.com

9/54