Report SPeaDer Bar
Report SPeaDer Bar
Report SPeaDer Bar
: : : :
0 REV
DOC. NO. :
REV 0 0
Date
01 - Jun - 2012 ISSUED FOR REVIEW
Description
DISTRIBUTION ORDER
PT. SARKU ENJINERING UTAMA: Project Manager Engineering Manager Procurement Manager Construction Manager QA/QC Manager HSE Manager Adm & Finance Manager Project Control Manager Process Lead Engineer Structural Lead Engineer Mechanical Lead Engineer Piping Lead Engineer Electrical Lead Engineer Instrument Lead Engineer Document Control CONOCOPHILLIPS INDONESIA INC. LTD.: Project Manager Assisstant Manager for Engineering Assisstant Manager for Construction/QA-QC Assisstant Manager for Schedule & Cost Control Assisstant Manager for Start Uping Chief Logistic & Services Chief Safety (Ka. LK3) Process Lead Engineer Structural Lead Engineer Mechanical Lead Engineer Piping Lead Engineer Electrical Lead Engineer Instrument Lead Engineer Document Control
DOC. NO. :
REV 0 0
CONTENTS
1. GENERAL 1.1. Applicable Specification, Codes and Standards 1.2. Material Specification 1.3. Stability Parameter 1.3.1. Allowable Vertical Displacement 1.4. Unit of Measurement 1.5. Computer Software 2. OUTLINE OF STRUCTURE 2.1. General Description 2.2. Modelling 2.2.1. Perspective 2.2.2. Node Numbering 2.2.3. Member Numbering 2.2.4. Member Schedule 3. DESIGN LOADS 3.1. Dead Load 3.2. Live Load 4. LOADING INPUT ON STAAD MODEL 5. DESIGN ANALYSIS 5.1. Steel Beam Ratio 5.2. Beam Deflection 5.3. Padeye Design
4 4 4 4 4 4 4
4 5 5 5 6 6
8 8 9
10 12 13
22 23
DOC. NO. :
REV 0 0
1. GENERAL
1.1.
Applicable Specification, Codes and Standards (1) Project Specification Design Specification for Civil and Structural (2) Codes and Standards AISC-ASD series 2001 : American Institute of Steel Construction Allowable Stress Design and Plastic Design Spesification for Structural Steel Building Japanese Industrial Standard (JIS): JIS G 3101, 1995 AWS.D.1.1, 2006 : Structural Steel : Structural Welding Code
1.2.
Material Specification Use JIS G 3101 Grade SS400 or ASTM A36 with minimum yield strength of structural steel fy = 2450 kg/cm2
1.3.
Stability Parameter 1.3.1 Allowable Vertical displacement Beams (due to total of dead and live loads) (due to live load only) span/250 span/360
1.4.
1.5.
Computer Software Applied computer software in this calculation: (1) StaadPro (2) MS Excel
2.
OUTLINE OF STRUCTURE 2.1 General Description This calculation covers the design of Spreader Bar.
DOC. NO. :
REV 0 0
2.2
2.2.2
Node Numbering
DOC. NO. :
REV 0 0
2.2.3.
Member Numbering
2.2.4.
DOC. NO. :
REV 0 0
Sling diameter 57 mm
DOC. NO. :
REV 0 0
3.
DESIGN LOADS Loading Input on the STAAD Model is refered to loading data from vendor.
3.1.
3.2.
Live Load L(F) Live Load for Rotor equipment L(F) = 40 Tonnes
DOC. NO. :
REV 0 0
4. LOADING INPUT ON THE STAAD MODEL Selfweight Y-1 (by Staad Pro) Live Load (Load Equipment)
DOC. NO. :
REV 0 0
5. DESIGN ANALYSIS 5.1. STEEL BEAM RATIO A detail of the steel ratio of the structure is shown on the following table.
Allowable Stress Limit : Stress Ratio for Beam : Stress Rasio for Sling:
10
DOC. NO. :
REV 0 0
----------------------------------------------------------------------| MEMB= 1 , UNIT NEW-MMS, L= 2350. AX= 6353. SZ= 472000.SY= 160000 .| | |
| KL/R-Y= 46.8 CB= 1.00 YLD= 247.99 ALLOWABLE STRESSES: FCZ= 163.7 | FTZ= 163.7 FCY= 186.0 FTY= 186.0 FA= 128.6 FT= 148.8 FV= 99.2 -----------------------------------------------------------------------
2 ST ST200X40 270.79 T
PASS 0.00
0.945 0.20
11
----------------------------------------------------------------------| MEMB= 2 , UNIT NEW-MMS, L= 200. AX= 8000. SZ= 266667.SY= 53333. | | |
| KL/R-Y= 17.3 CB= 1.00 YLD= 247.99 ALLOWABLE STRESSES: FCZ= 163.7 | FTZ= 163.7 FCY= 163.7 FTY= 163.7 FA= 143.1 FT= 148.8 FV= 99.2 -----------------------------------------------------------------------
3 ST ST200X40 270.79 T
PASS 0.00
0.945 0.20
11
----------------------------------------------------------------------| MEMB= 3 , UNIT NEW-MMS, L= 200. AX= 8000. SZ= 266667.SY= 53333 .| | |
| KL/R-Y= 17.3 CB= 1.00 YLD= 247.99 ALLOWABLE STRESSES: FCZ= 163.7 | FTZ= 163.7 FCY= 163.7 FTY= 163.7 FA= 143.1 FT= 148.8 FV= 99.2 -----------------------------------------------------------------------
4 ST RD57
PASS
0.896 2.35
11
313.47 T
----------------------------------------------------------------------| MEMB= 4 , UNIT NEW-MMS, L= 2350. AX= 2550. SZ= 18175.SY= 18175. | | |
| KL/R-Y= 164.9 CB= 1.00 YLD= 247.99 ALLOWABLE STRESSES: FCZ= 163.7 | FTZ= 163.7 FCY= 163.7 FTY= 163.7 FA= 38.8 FT= 148.8 FV= 99.2 -----------------------------------------------------------------------
5 ST RD57
PASS
0.896 0.00
11
313.47 T
11
DOC. NO. :
REV 0 0
5.2.
BEAM DEFLECTION Deflection max : Allowable Deflection : 3.35 mm 2350/250 9.4 mm > 3.35 mm OK (member 1, Comb DL+LL)
12
DOC. NO. :
REV 0 0
5.3
PADEYE DESIGN
13
DOC. NO. :
REV 0 0
14
DOC. NO. :
REV 0 0
15
DOC. NO. :
REV 0 0
16
DOC. NO. :
REV 0 0
17
DOC. NO. :
REV 0 0
18
DOC. NO. :
REV 0 0
19
DOC. NO. :
REV 0 0
20
DOC. NO. :
REV 0 0
21
DOC. NO. :
REV 0 0
22
DOC. NO. :
REV 0 0
ATTACHMENT
23
DOC. NO. :
REV 0 0
24