Technical Data Sheet CM24G-..: Type Overview

Technical data sheet
Damper actuator for operating air control dampers in ventilation and air-conditioning systems for building services installations For air dampers up to approx. 0.4 m2 Torque 2 Nm Nominal voltage AC/DC 24 V Control: Open-close or 3-point Degree of protection IP66
CM24G-..
Type overview
Type CM24G-L CM24G-R Direction of rotation counter-clockwise (ccw) clockwise (cw)
. . . . . . . . . . .
Technical data
Electrical data Nominal voltage Nominal voltage range Power consumption In operation At rest For wire sizing Connection Torque (nominal torque) Direction of rotation Manual override Angle of rotation Without limit With limit Running time Sound power level Position indicator Safety
Notes To guarantee IP66 protection, the device must be mounted on the rear of the damper housing without a gap. If the device is mounted on the front of the damper housing (i.e. turned 180 ), it only has IP54 protection.
AC 24 V, 50/60 Hz / DC 24 V AC/DC 19.2 ... 28.8 V 0.5 W @ nominal torque 0.2 W 1 VA Cable 1 m, 3 x 0.75 mm2 Min. 2 Nm @ nominal voltage See Type overview Gear disengagement with magnet Endless Fixed 315 or 0 ... 287.5 with mechanical end stops, can be adjusted in 2.5 increments 75 s / 90 Max. 35 dB (A) Mechanical, pluggable (with integrated magnet for gear disengagement) III Safety extra-low voltage / UL Class 2 Supply IP66 NEMA2, UL Enclosure Type 2 CE according to 2004/108/EC cULus according to UL 60730-1A and UL 60730-2-14 and CAN/CSA E60730-1:02 Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14 Type 1 (EN 60730-1) 0.8 kV (EN 60730-1) 3 (EN 60730-1) 30 ... +50C 40 ... +80C 95% r.H., non-condensating (EN 60730-1) Maintenance-free See Dimensions on page 2 Approx. 220 g
Functional data
Protection class Degree of protection EMC Certification Mode of operation Rated impulse voltage Control pollution degree Ambient temperature Non-operating temperature Ambient humidity Maintenance Dimensions Weight
Dimensions / Weight
Safety notes
The actuator is not allowed to be used outside the specified field of application, especially in aircraft or any other form of air transport. Assembly must be carried out by trained personnel. Any legal regulations or regulations issued by authorities must be observed during assembly. The device may only be opened at the manufacturers site. It does not contain any parts that can be replaced or repaired by the user. When calculating the required torque, the specifications supplied by the damper manufactur ers (cross section, design, installation site), and the air flow conditions must be observed. The device contains electrical and electronic components and is not allowed to be disposed of as household refuse. All locally valid regulations and requirements must be observed.
www.belimo.com
T2-CM24G-.. en v1.1 08.2008 Subject to changes
/2
CM24G-..
Product features
Simple direct mounting Manual override Adjustable angle of rotation High functional reliability
Damper actuator, AC/DC 24 V, 2 Nm, IP66
Simple direct mounting on the damper spindle with a universal spindle clamp ( 6 ... 12.7 mm). The actuator is then secured with the anti-rotation strap supplied, to prevent it from rotating. Manual override with magnet possible (the gear is disengaged as long as the magnet adheres to the symbol . The magnet for gear disengagement is integrated in the position indicator. Adjustable angle of rotation with mechanical end stops. The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.
U
Electrical installation
Note Connect via safety isolation transformer. Other actuators can be connected in parallel. Please note the performance data. +
3 L R
Dimensions [mm]
Dimensional drawings
19
28
16
158 28 130
4. 3
5 Damper spindle Length 32 6 ... 12.7
/2
56
T2-CM24G-.. en v1.1 08.2008 Subject to changes
www.belimo.com
61
24
~
+
0
Wiring diagrams
Open-close control
3-point control
3 L R

70907-00002.A
CM..G-..
>32 m >1 m 6 ... 12.7 mm ...

12 0
90
10 5
75
60 45 30
IP66
IP66
70 20 mm 2.8 0.8
3.1 ... 3.2 mm /
2.5
12 0
3
90 2.5
30
15
0 12
90
10 5
12 0
75
60 45 30
90
12 0
12
10 5
2
0
90
75
60 45 30
75
60 45 30
5 10
90
30
12 0
0 12
0 12
!
30 mm 1.2
12 0 5 10
90
75
60
45
30 15
120 60
5 10
90
75
0 12
12 0
5 10
90
75
60
45
30
15
12 0
5 10
90
75
60
45
30 15
12 0
10 5
CM24G-SR-..
12 0 5 10
ma x
90
75 60
45
30 15
0 12
www.belimo.com
M2-CM..G-.. v1.0 06.2008
90 10 51 20
12 0
45
30
45
60
60
75 90
90
30
75 90
10 5
75
10 5
60 45 30
0 12
90
75
60 45 30
30
45
60
75 90
10 5
10 5
90 10 51 20
75
60
45
2
15
10 5
90 10 5
12
90
12 0
10 5
6 Nm
12
75
60 45 30
10 5
5 10
90
75
60
45
90 10 51 20
30
90 10 51 20
15
90
75
60 45 30
45
60
75 90
10 5
30
90 10 5
45
12
60
75
90
10 5
30
45
60
75 90
10
90 10 51 20
15
15
15
m 3m 3 .3 R 1 R
15
5 .9
15
/2
CM..G-..
AC 24 V / DC 24 V
1 BK
2 RD
3 WH L R
1 BK
2 RD
CM24G-..
CM24G-.. N L
0
AC 100 ... 240 V
3 L R
CM230G-..
CM230G-..
AC 24 V / DC 24 V
Y U 1 2 3 5 BK RD WH OG
DC 0 ... 10 V DC 2 ... 10 V
CM24G-SR-..
/2
M2-CM..G-.. v1.0 06.2008
~
+ 3 WH L R 2 3 L R
~ ~
www.belimo.com

Technical Data Sheet CM24G-..: Type Overview

Uploaded by

Copyright:

Available Formats

Technical Data Sheet CM24G-..: Type Overview

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Technical Data Sheet CM24G-..: Type Overview

Uploaded by

Copyright:

Available Formats

Technical data sheet

T2-CM24G-.. en v1.1 08.2008 Subject to changes

Damper actuator, AC/DC 24 V, 2 Nm, IP66

5 Damper spindle Length 32 6 ... 12.7

T2-CM24G-.. en v1.1 08.2008 Subject to changes

>32 m >1 m 6 ... 12.7 mm ...

3.1 ... 3.2 mm /

M2-CM..G-.. v1.0 06.2008

AC 100 ... 240 V

M2-CM..G-.. v1.0 06.2008

You might also like