Scribd Logo
Upload

Welcome to Scribd!

  • 90 views

    DR Mike Thompson: Winchester College, UK

    Uploaded by

    azilatul
    There are two main methods to test for sulphur dioxide in wine - the iodometric titration method (also called the Ripper method) and the aeration oxidation method (AO method, also called the Rankine or Tanner method). The AO method involves acidifying the wine sample, distilling the SO2 into a peroxide solution where it reacts to form sulfuric acid, then titrating the acid with sodium hydroxide to calculate the SO2 level. This method avoids issues with the Ripper method but can overestimate SO2 levels due to acidification effects and inefficient distillation.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd

    DR Mike Thompson: Winchester College, UK

    Uploaded by

    azilatul
    90 views4 pages
    There are two main methods to test for sulphur dioxide in wine - the iodometric titration method (also called the Ripper method) and the aeration oxidation method (AO method, also called the Rankine or Tanner method). The AO method involves acidifying the wine sample, distilling the SO2 into a peroxide solution where it reacts to form sulfuric acid, then titrating the acid with sodium hydroxide to calculate the SO2 level. This method avoids issues with the Ripper method but can overestimate SO2 levels due to acidification effects and inefficient distillation.

    Original Title

    Dr Mike Thompson

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    There are two main methods to test for sulphur dioxide in wine - the iodometric titration method (also called the Ripper method) and the aeration oxidation method (AO method, also called the Rankine or Tanner method). The AO method involves acidifying the wine sample, distilling the SO2 into a peroxide solution where it reacts to form sulfuric acid, then titrating the acid with sodium hydroxide to calculate the SO2 level. This method avoids issues with the Ripper method but can overestimate SO2 levels due to acidification effects and inefficient distillation.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    90 views4 pages

    DR Mike Thompson: Winchester College, UK

    Uploaded by

    azilatul
    There are two main methods to test for sulphur dioxide in wine - the iodometric titration method (also called the Ripper method) and the aeration oxidation method (AO method, also called the Rankine or Tanner method). The AO method involves acidifying the wine sample, distilling the SO2 into a peroxide solution where it reacts to form sulfuric acid, then titrating the acid with sodium hydroxide to calculate the SO2 level. This method avoids issues with the Ripper method but can overestimate SO2 levels due to acidification effects and inefficient distillation.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

    Dr Mike Thompson

    Winchester College, UK

    Also available: HTML, Chime Enhanced, JMol and Chemsymphony versions.

    Sulphur forms two main oxides; the gas sulphur dioxide (SO2) and the liquid sulphur trioxide (SO3). Sulphur dioxide is a dense colourless gas, which is soluble in water, and has a suffocating and unpleasant smell of burnt matches. It has a melting point of -72.7C, and a boiling point of -10C. Sulphur dioxide gas can be made directly by heating its constituent elements. Burning molten sulphur in either air or pure oxygen leads to a reaction, which produces a pale blue coloured flame. This looks quite impressive in a darkened room. S8 (l) + 8 O2 (g) 8 SO2 (g)

    Sulphur

    Burning sulphur to give a blue flame

    An alternative laboratory preparation is to heat copper turnings with concentrated sulphuric acid (H2SO4), see image, right. Cu (s) + 2 H2SO4 (aq) CuSO4 (aq) + SO2 (g) + 2 H2O (l)

    Sulphur dioxide is an acidic gas and this can easily be demonstrated by adding water and a few drops of universal indicator to a container of the gas. The resulting acid is the weakly dibasic acid sulphurous acid (H2SO3). SO2 (g) SO2 (aq) H2SO3 (aq)

    SO2 (aq) + H2O (l)

    Sulphur dioxide is a major component of acid rain since it mixes with water vapour in the atmosphere, reacting to produce sulphuric acid (H2SO4). This

    is possible as UV radiation in the upper atmosphere catalyses the reaction between sulphur dioxide and oxygen to produce sulphur trioxide which goes on to react with water. Much has now been done to reduce SO2 emissions with desulphurisation of fuels to help reduce acid rain. Statistics are available on sulphur dioxide levels from 1974 to 1998. Sulphur dioxide exists as individual covalent Vshaped planar molecules with an OSO bond angle of 120 A simple test for sulphur dioxide is to pass the gas over a piece of filter paper soaked in acidified Na2Cr2O7. The paper goes from an orange colour for the Cr6+ to a green colour for Cr3+. As the oxidation number of chromium is reduced from 6+ to 3+ this clearly indicates a useful property of sulphur dioxide, namely it is a reducing agent. It has found use as an antioxidant, which can help prevent food from spoiling.

    Orange Cr6+ changing to blue-green Cr3+ in the presence of SO2

    SO2 is used in fruit drinks to help preserve them.

    SO2 is used in wines

    The main natural sources of sulphur dioxide are volcanoes, forest fires and oceans. The main human sources of sulphur dioxide are burning fossil fuels, smelting, paper manufacture and the production of sulphuric acid via the Contact Process. Increasingly there are health concerns with sulphur dioxide as it can trigger asthma in certain individuals. Next time you go to a supermarket why not check food labels to see if they contain sulphur dioxide (additives E220 and E221) or a chemical, which decomposes to produce the gas (E222-8). Sulphur dioxide is found in soft drinks such as fruit juices, some meats and wines. Sulphur dioxide also finds uses as in bleaching and in purifying petroleum products. Additional ways to produce sulphur dioxide are to drip concentrated sulphuric acid onto a concentrated solution of sodium hydrogen sulphite. NaHSO3 (aq) + H2SO4 (aq) NaHSO4 (aq) + H2O (l) + SO2 (g)

    GCSE students of Chemistry often come across another way to produce sulphur dioxide in their study of reaction rates in the "disappearing cross" experiment (link slow to load). Na2S2O3 (aq) + 2 HCl (aq) NaCl (aq) + H2O (l) + S (s) + SO2 (g)

    For those who are anxious about the spelling of sulfur click here.

    What are the 2 different methods of titration to test Sulphur Dioxide in Wine?
    There are 2 different methods of testing the amount of sulphur dioxide in wine. One technique is the Iodometric Titration. I kow that there is one other method. Please help by stating the other method and possible place to get the technique for this process. Thanks

    7 years ago Report Abuse

    by ChErRy Member since: August 19, 2006 Total points: 694 (Level 2)

    Add Contact Block

    Best Answer - Chosen by Voters


    The most common methods are probably the Ripper method (uses iodine)[Ripper, 1892] and the aeration oxidation (AO) method. The AO method, also called the Rankine method after Rankine [1962] or the Tanner method after Tanner [1963], is a modification of the Monier-Williams method. It involves the acidification of a sample, followed by the distillation of SO2 (with nitrogen sweeping gas or air aspiration) out of the sample into a peroxide solution. The SO2 and peroxide react to form H2SO4 according to the following equation:

    H2O2 + SO2 --> SO3 + H2O --> H2SO4

    The acid formed is then titrated with NaOH to an end point, and the volume of NaOH required used to calculate the SO2 level. This method avoids the iodine-phenol binding which occurs in the Ripper method. However, it is not without its problems. The acidification of the solution causes a shift in the equilibrium between bisulphite and anthocyanins, and the SO2 bound anthocyanins (red wine pigments). This causes a freeing of some anthocyanin bound SO2, resulting in an increased free SO2 concentration and a false-high free SO2 measurement. An inefficient condenser (used in the distillation) accompanied by high volatile acidity will also result in a false-high measurement. Additionally, the flow rate of the aspiration is important in AO testing. An excessively high aspiration rate may prevent sufficient time to allow the H2O2-SO2 reaction to complete. A 15-20 minute aspiration time with a flow rate of 1-1.5 L/min is recommended [Buechsenstein and Ough, 1978]. Despite these potential inaccuracies, the AO method gives reproducible results and has been noted as having an accuracy with just a 2.5-5% error [Buechsenstein and Ough, 1978].

    You might also like