Ring Type Joints
A T
.
.
www.novusproducts.eu
Novus Ring Type Joints
Ring Type Joints
We manufacture and supply a variety of high
quality sealing products designed for flange
applications in the industrial and manufacturing
sectors. We have an extensive network
of distributors worldwide, including Novus
companies in Australia, China and South Africa
ensuring that we can meet all of our
customers global requirements.
We supply Ring Type Joints which are fully
approved to API 6A Product Specification
level 4, the highest quality rating.
Ring Type Joints are widely used by the Oil,
Gas, Petrochemical and Offshore Industries
in applications subject to high pressures and
temperatures.
These joints are designed to concentrate
the bolt load over a small area thus producing
high seating stresses. As the ring type material
should always be softer than the mating
flanges, the high seating stress causes plasticflow of the ring joint in the flange faces
creating the seal.
Novus Ring Type Joints
We supply a range of specialised Ring Type
Joints for critical and non standard applications
to suit the requirements of the petrochemical
industry.
PTFE Insert
Cam-ORJ
Combination Ring Type Joints
RX Ring Type Joint
Novus model M12PI
Cam-ORJ
The Cam-ORJ is a standard API 6A octagonal
ring joint but with the four angled seating
surfaces concentrically serrated and faced with
oxidation inhibited graphite. The gasket offers
the high sealing efficiency associated with the
octagonal design but with the added benefit of
being capable of sealing flanges with minor
damage. Under compression the graphite flows
into minor imperfections creating a tight seal.
Ring Type Joints with PTFE Inserts
M12 model RX Ring Type Joints can be supplied
with PTFE inserts. Designed to reduce turbulent
flow and eliminate ring joint and flange corrosion. The insert is specially designed with radially drilled holes ensuring the self-energising
performance is not affected. The insert is located between the inside diameter of the ring joint
and the bore of the flange. On assembly, the
insert is captured between the flanges, filling
the void between ring joint and flange bore.
The Cam-ORJ is available in a range of Alloy
materials and in sizing to suit ASME B16.5 or
API 6A flanges.
This Ring Type Joint consists of 2 different sizes
having the same pitch diameter, used for sealing
and flange joint where the mating flanges have
different ring groove dimensions or profiles.
These Ring Type Joints can be produced with
either octagonal or oval facings, however they
are not manufactured in accordance with API
specification.
Lens Rings
This is a contact seal for use in high pressure
piping systems and in pressure vessel heads.
Lens rings have a spherical surface that requires
special matching of the flanges. Effective sealing is obtained at a relatively low bolt loads.
These ring type joints are manufactured in
accordance with DIN 2696. For enquiries
complete drawings must be supplied.
Blind Ring Type Joints
Novus model M8R and M9R
Rubber Coated Ring Type Joints
This is an octagonal/oval section ring type joint
generally soft iron or low carbon steel totally
enclosed in a nitrile rubber coating. Widely used
in pressure testing procedures, minimising any
damage to the flange.
These specialised Ring Type Joints are designed
and manufactured for the customer who has
a requirement to blank off flanges and pipe
work. The Joints are standard rings but with a
machined metallic centre.
Blind Ring Type Joints can be supplied in a
variety of materials.
Delta Rings
This is a pressure actuated ring used primarily
on pressure vessels and valve bonnets at pressures
in excess of 5000 psi. Internal pressure forces the
delta ring material to expand.
As with the Lens rings for enquiries and orders
should be sent with complete drawings.
Novus Ring Type Joints
Ring Type Joint Profiles
Type R Ring Type Joints
Type BX Ring Type Joints
M8
M9
Novus models M8 and M9
M8 model R Oval section and M9 model R
Octagonal section ring type joints are
designed for flanges with standard ring type
grooves. These standard shapes are used to
seal pressures up to 5,000 psi in accordance
with API 6A.
The Octagonal cross section has a higher sealing efficiency than the oval cross section and
is therefore preferred. The oval section ring
joints were originally designed for the now
obsolete round bottom groove. Both the oval
and the octagonal cross section are interchangeable on the flat bottom groove design.
M11
Type RX Ring Type Joints
M12
Novus model M11/M11S
Novus model M12/M12S
M11 model BX Ring Type Joints are designed
for pressures up to 20,000 psi, suitable only
for use with API type BX flanges and grooves.
The gasket has a square cross section with
bevelled corners. The average diameter of the
ring joint is slightly greater than that of the
flange groove. This way, when the ring joint
is seated, it stays pre-compressed by the outside diameter, creating high seating stress.
M12 model RX Ring Type Joints are designed for
pressures up to 5,000 psi.
A pressure activated ring joint, its shape is
designed to use the fluid pressure to increase
sealability. The outside sealing surface of the
ring joint makes the initial contact with the
flange. As the internal pressure rises the
contact pressure between ring joint and flange
also increases. This is sometimes referred to as a
pressure activated ring joint. due to the shape of
the gasket. High seating pressures are created
increasing the sealability. This design characteristic makes the RX ring joint more resistant to
vibrations, pressure surges and shocks that
occur during oil well drilling.
The M11S Model SBX Ring Type Joint is the
same design as the BX Ring, however the
suffix S indicates that additional pressure
equalisation holes have been drilled in
accordance with API 17D for use on sub sea
wellhead and christmas tree equipment.
M12S Model SBX Ring Type Joint is the same
in design to the RX Ring, however, the suffix
S indicates that additional pressure equalisation holes have been drilled in accordance
with API 17D for use on sub sea wellhead and
christmas tree equipment.
Novus Ring Type Joints
23O
Service
Technical
Novus
M8ourselves
Model Ron
Oval
and our customers
We pride
providing
Novus
M9
Model
R
Octagonal
Ring Type
with a high quality product, supported
by Joints
an
(continued)
outstanding, honest and reliable service.
Over the years we
have enhanced our
H
B
technical facilities to develop more new
products and provide guidance and training proA some Pof the world'sAlargest chemgrammes for
P
ical and petrochemical plants.
API
6A Dimensionalstock
Data of most
WeSpecification
hold a comprehensive
standard ring type joints
Pitch
Pressure Class Ratings
We have a dedicated Research &Diameter
Ring
ASME/ANSI B16.5
API
6A
ASME
B16.47
Series
A
Quality
Development team including an expe- of Ring
Number
150 300/600 900 1500 2500
150 300/600
P
3000
5000
2000
900
rienced metallurgist. They ensure
All Novus Ring Type Joints are manufactured
Nominal Pipe Sizes (inches)
high quality technical support for
with
full traceability
to API6A PSL 4. Each13.5/8
ring 13.5/8
R56
381.00
12
our complete product portfolio.
typeR57joint has 12
(etched12on the non seating
381.00
surface)
R58 the heat number, ring12number, materi381.00
Investment
al identification
and API licence number etc
R59 14
396.88
We continue to invest heavily
R60
providing
comprehensive information
12 to our
406.40
in UK manufacturing and our
14
419.10
endR61
user.
metallic gasket department has
14
R62
419.10
recently gone through an expansion
14
R63
419.10
and modernisation programme, 454.03
R64 16
which puts us at the forefront of the469.90
16.3/4
469.90
16gasket manufacturing industry
469.90
517.53
533.40
533.40
18
533.40
558.80
584.20
21.3/4
584.20
20.3/4
584.20
673.10
692.15
692.15
24
692.15
R80
615.95
R81
635.00
22
R82
57.14
22
Accuracy and precision throughout
the production
R84
63.50
process is rigorously checked.
R85
79.38
R86
90.50
R87
100.03
R88
122.83
R89
114.30
R90
155.58
R91
260.25
R92
228.60
R93
749.30
26
R94
800.10
28
R95
857.25
30
R96
914.40
32
R97
965.20
34
R98
1019.18
36
All Ring Type Joints are engraved on the nonseating
R99
234.95
surface with the ring number, heat number, material
R100
26
749.30
identification and the API licence number.
R101
28
800.10
R102
30
857.25
R103
32
914.40
R104
34
965.202
R105
36
1022.35
Tolerances (Inches)
A (width of ring) + or - 0.008
B,H (height of ring) + or - 0.020
P (average pitch diameter of ring) + or - 0.007
23O (angle) + or - 0.5O
Width
of
Ring
A
Height of Ring
Oval
B
Octagonal
H
Dimensions in Millimetres
Approx
distance
between
made up
flanges
Approx Weight KGs
Oval
Octagonal
0.88
0.95
12.70
7.95
14.30
1.56
1.61
4.8
15.90
11.13
17.50
5.12
5.07
27.00
22.23
28.60
0.92
0.99
12.70
7.95
14.30
10.65 11.72
38.10
31.75
39.70
1.72
1.77
15.90
11.13
17.50
3.09
3.15
20.60
15.88
22.20
7.52
7.45
5.6
31.80
25.40
33.30
1.05
1.14
12.70
7.95
14.30
1.92
1.98
4.8
15.90
11.13
17.50
3.46
3.53
4.1
20.60
15.88
22.20
10.25 10.71
34.90
28.58
36.50
1.19
1.30
12.70
7.95
17.30
2.20
2.27
4.8
15.90
11.13
17.50
5.40
5.48
4.8
23.90
19.05
25.40
11.75 12.27
34.90
28.58
36.50
1.29
1.40
12.70
7.95
14.30
2.99
3.03
3.3
17.50
12.70
19.10
5.86
5.95
4.8
23.90
19.05
25.40
15.31 16.20
38.10
31.76
39.70
1.55
1.68
12.70
7.95
14.30
5.10
5.20
20.60
15.88
22.40
12.30 12.66
31.80
25.40
33.30
22.40 22.98
41.30
34.93
44.50
1.41
12.70
7.95
3.92
19.10
14.29
0.23
4.8 machined for precision
15.90
11.13 Every Ring Type
Joint is CNC
0.26
11.13 and consistent15.90
accuracy. 4.8
0.44
3.3
17.50
12.70
0.66
4.1
20.60
15.88
0.72
4.1
20.60
15.88
1.24
4.8
23.90
19.05
1.15
4.8
23.90
19.05
2.06
4.8
26.90
22.23
6.83
4.1
38.10
31.75
0.92
17.50
11.13
7.52
7.63
23.09
19.05
8.03
8.16
23.09
19.05
8.60
8.73
23.09
19.05
12.16 12.29
27.00
22.23
13.10 13.24
27.00
22.23
13.59 13.74
27.00
22.23
The production facility is work-flow designed for speed
0.95
4.8
15.90
11.13
efficiency and ease of quality control.
16.35 17.08
34.90
28.58
20.97 22.19
38.10
31.75
22.47 22.47
38.10
31.75
23.97 23.78
38.10
31.75
31.24 32.05
41.30
34.93
33.10 33.95
41.30
34.93
Notes: End flanges to API 6D and API 600 use ring joints for equivalent pipe size under ASME/ANSI B16.5 or ASME B16.47 series A
Novus Ring Type Joints
Seating Stress
To achieve a reliable seal, the Ring Type Joint
should be assembled within the following
seating stress parameters:
Seating Stress (20OC)
Material
Identification
Minimum
(N/mm2)
Optimum
(N/mm2)
Maximum
(N/mm2)
Soft Iron
235
350
525
Low Carbon Steel
265
400
600
A182FS
FS
400
600
900
SS304
S304
335
500
750
SS316
S316
335
500
750
SS321
S321
335
500
750
SS347
S347
335
500
750
For other materials please contact our technical department
Flange Surface Finish
The Ring Type Joint and the sealing face of the
groove must be free of indentations, score
marks, tool and chatter marks.
The maximum flange surface finish for M8, M9,
model R, M12 model RX is 1.6m RA (63RMS).
The maximum flange surface finish for
M11 model BX is 0.8m RA (32RMS)
How to Order
A correct purchase order should contain the
following information.
1. Ring Type Joint model
eg. M8 R Oval
2. Ring number/size & pressure rating
R16/Class 1 3/600lbs
3. Material/Identification
Soft Iron or D
4. Flange Standard
ASME/ANSI B16.5
Note: This can be abbreviated to R16D Oval RTJ
Novus Ring Type Joints
23O
Novus M12 Model RX Ring Type Joints
API Specification 6A Dimensional Data
23O
A
23O
Pressure Class Ratings (PSI)
Ring
Number
API 6A
150
300/600
900
Tolerances (Inches)
A* (width of ring) +0.008, -0.000
H* (height of ring) +0.008, -0.000
OD (outside diameter of ring) +0.020, -0.000
23O (angle) + or - 0.5O
2.1/16
3.1/8
2.1/16
2.9/16
3.1/8
2.9/16
3.1/8
4.1/16
4.1/16
2.9/16
3.1/8
4.1/16
7.1/16
7.1/16
11
11
13.5/8
13.5/8
permitted, provided the variation
in width or height does not
exceed 0.004 inches throughout
the entire circumferance.
Pitch
Diameter
of Ring
P
Outside
Diameter
of Ring
OD
Width
of Ring
Height
of Ring
Approx
distance between
made-up flanges
Approx
Weight
KGs
Dimensions in Millimetres
2.1/16
7.1/16
for width A and height H is
Nominal Pipe Sizes (Inches)
RX20
RX23
RX24
RX25
RX26
RX27
RX31
RX35
RX37
RX39
RX41
RX44
RX45
RX46
RX47
RX49
RX50
RX53
RX54
RX57
RX63
RX65
RX66
RX69
RX70
RX73
RX74
RX82
RX84
RX85
RX86
RX87
RX88
RX89
RX90
RX91
RX99
RX201
RX205
RX210
RX215
*A plus tolerance of 0.008 inches
9
11
16.3/4
16.3/4
21.1/4
20.3/4
1.3/8
1.13/16
2.9/16
4.1/16
68.26
82.55
95.25
101.60
101.60
107.95
123.85
136.53
149.23
161.93
180.98
193.68
211.15
211.15
228.60
269.88
269.88
323.85
323.85
381.00
419.10
469.90
469.90
533.40
533.40
584.20
584.20
57.15
63.50
79.38
90.50
100.03
123.83
114.30
155.58
260.35
234.95
46.05
57.15
88.90
130.18
76.20
93.27
105.97
109.54
111.91
118.26
134.54
147.24
159.94
172.64
191.69
204.39
221.84
222.25
245.26
280.59
283.36
334.57
337.34
391.72
441.73
480.62
483.39
544.12
550.06
596.11
600.86
67.87
74.22
90.09
103.58
113.11
139.29
129.77
174.63
286.94
245.67
51.46
62.31
97.64
140.89
Model RX are interchangeable with R Octagonal Ring Joints
A pressure balance hole of 1.5mm diameter is incorporated in RX82 through to RX91
8.74
11.91
11.91
8.74
11.91
11.91
11.91
11.91
11.91
11.91
11.91
11.91
11.91
13.49
19.84
11.91
16.66
11.91
16.66
11.91
27.00
11.91
16.66
11.91
19.84
13.49
19.84
11.91
11.91
13.49
15.09
15.09
17.48
18.26
19.84
30.16
11.91
5.74
5.56
9.53
11.91
19.05
25.40
25.40
19.05
25.40
25.40
25.40
25.40
25.40
25.40
25.40
25.40
25.40
28.58
41.28
25.40
31.75
25.40
31.75
25.40
50.80
25.40
31.75
25.40
41.28
31.75
41.28
25.40
25.40
25.40
28.58
28.58
31.75
31.75
44.45
45.24
25.40
11.30
11.10
19.05
25.40
9.7
11.9
11.9
11.9
11.9
11.9
11.9
11.9
11.9
11.9
11.9
11.9
11.9
18.3
11.9
11.9
11.9
11.9
11.9
21.30
11.9
11.9
11.9
18.3
15.0
18.3
11.9
11.9
9.7
9.7
9.7
9.7
9.7
18.3
19.1
11.9
0.24
0.53
0.62
0.36
0.66
0.70
0.80
0.89
0.97
1.05
1.18
1.26
1.37
1.67
3.91
1.76
2.89
2.11
3.47
2.48
12.03
3.06
5.04
3.48
9.18
4.66
10.06
0.37
0.41
0.53
0.82
0.91
1.48
1.37
3.12
7.80
1.53
0.06
0.08
0.35
0.78
Novus Ring Type Joints
23O
Novus M11 Model BX Ring Type Joints
API Specification 6A Dimensional Data
H
Tolerances (Inches)
A* (width of ring) +0.008, -0.000
D (hole size) + or - 0.02
H* (height of ring) + 0.008, - 0.000
OD (outside diameter of ring) + 0.000, - 0.006
23O (angle) + or - 0.25O
A
P
23O
Pressure Class Ratings (PSI)
API 6A
Ring Number
2000
3000
5000
10000
Nominal Pipe Sizes (inches)
15000
20000
Outside
Diameter
of Ring
OD
Height
of Ring
Width
of Ring
Hole
Size
Approx
Weight
KGs
9.30
1.60
0.13
Dimensions in Millimetres
BX150
72.19
9.30
BX151
1.13/16
1.13/16
1.13/16
76.40
9.63
9.63
1.60
0.15
BX152
2.1/16
2.1/16
2.1/16
84.68
10.24
10.24
1.60
0.19
BX153
2.9/16
2.9/16
2.9/16
100.94
11.38
11.38
1.60
0.28
BX154
3.1/16
3.1/16
3.1/16
116.84
12.40
12.40
1.60
0.39
BX155
4.1/16
4.1/16
4.1/16
147.96
14.22
14.22
1.60
0.66
BX156
7.1/16
7.1/16
7.1/16
237.92
18.62
18.62
3.20
1.84
BX157
294.46
20.98
20.98
3.20
2.92
BX158
11
11
11
352.04
23.14
23.14
3.20
4.26
13.5/8
13.5/8
13.5/8
426.72
25.70
25.70
3.20
6.42
402.59
23.83
13.74
3.20
3.03
491.41
28.07
16.21
3.20
5.14
2.26
BX159
BX160
13.5/8
BX161
16.3/4
BX162
16.3/4
BX163
18.3/4
BX164
16.3/4
18.3/4
18.3/4
21.1/4
BX165
21.3/4
BX166
BX167
16.3/4
26.3/4
26.3/4
BX168
5.1/8
BX169
475.49
14.22
14.22
1.60
556.16
30.10
17.37
3.20
6.70
570.56
30.10
24.59
3.20
9.73
624.71
32.03
18.49
3.20
8.54
640.03
32.03
26.14
3.20
12.38
759.36
35.87
13.11
1.60
8.14
765.25
35.87
16.05
1.60
10.13
173.51
15.85
12.93
1.60
0.79
BX170
218.03
14.22
14.22
1.60
1.00
BX171
11
11
267.44
14.22
14.22
1.60
1.24
13.5/8
13.5/8
333.07
14.22
14.22
1.60
1.56
852.75
37.95
16.97
1.60
12.66
BX172
BX303
30
30
BX Ring Joints can be used in API 6BX Flanges.
A pressure balance hole is incorporated in all
BX Rings to equalise any pressure trapped in
the flange.
Novus Ring Type Joints
Hardness of Ring Type Joint Materials
On installation, the material of the ring joint has to
be softer than that of the flange to avoid damage.
This table provides comparative data of Ring
Type Joint material hardness values.
Material
(Trade Name)
Identification
DIN
Specification
DIN
Material
No.
B.S.
AISI-ASTM
UNS
Maximum Hardness
Temperature
Brinell
HB
Rockwell B
HRB
Min.
Max.
Density
Soft Iron
90
56
-40
500
7.85
Low Carbon Steel
R st 37.2
120
68
-40
500
7.85
F5
F5
5 Cr 0.5 mo
1.7362
A182FS
130
72
-40
650
7.83
SS 304
S304
X5Cr Ni 18
1.4301
304S15/16/13
304
160
83
-250
550
7.90
SS 304L
S304L
X2 Cr Ni 18.9
1.4306
304S11
304L
160
83
-250
550
7.90
SS 309
S309
X15 Cr Ni Si 20.12
1.4828
304S24
309
160
83
-100
1000
7.90
SS 316
S316
X5 Cr Ni Mo 18.10
1.4401
316S16
316
160
83
-100
550
7.90
SS 316L
S316L
X2 Cr Ni Mo 18.10
1.4404
316S11/13
316L
160
83
-100
550
7.90
SS 316Ti
S316TI
X10 Cr Ni Mo Ti 18.10
1.4571
320S31
316Ti
160
83
-100
550
7.80
SS 321
S321
X10 Cr Ni Ti 18.9
1.4541
321S12/49/87
321
160
83
-250
550
7.90
SS 347
S347
X10 Cr Ni Nb 18.9
1.4550
347S31
347
160
83
-250
500
7.90
SS 410
S410
X6 Cr 13
1.4000
410S21
410
170
86
-20
850
7.80
S31254
180
89
-100
500
8.00
99
-40
300
7.80
254SMO
6Mo
X1Cr N i Mo Cu N 20.18.7
1.4547
Duplex
2205
X2 Cr Ni Mo N 22.5.3
14462
31853
Super Duplex
2507
X2 Cr Ni Mo N 25.6.3
14410
S32750
230 approx
99
-40
300
7.80
Aluminium
AL 1050
A1 99.5
3.0255
1B
A91050
30
-250
300
2.71
S31803/32205 230 approx
Silver
Ag
28 (HV)
-250
750
10.50
Copper
Cu
SF-Cu
2.0090
C106
C12200
80 approx
-250
400
8.90
Brass
CuZn37
Cu Za 37 (M563)
20321
CZ108
C27200
60 approx
-100
350
8.50
Nickel 200
Ni 200
Ni 99.2
2.4066
3072-76 NA11
NO2200
110
62
-250
600
8.90
Monel 400
400
Ni Cu 30 Fe
2.4360
3072-76 NA13
NO4400
150
80
-125
600
8.80
Inconel 600
600
Ni Cu 15 Fe
2.4816
3072-76 NA14
NO6600
150
80
-100
950
8.40
Inconel 625
625
Ni Cr 22 Mo 9 Mb
2.4856
3072-76 NA 21
NO6625
150
80
- 50
450
8.44
Incoloy 800
800
X10 Ni Cr A1 Ti 3220
1.4876
3072-76 NA15
NO8800
150
80
-100
850
8.00
Incoloy 825
825
Ni Cr 21 Mo
2.4858
3072-76 NA16
NO8825
195
92
-100
450
8.14
Hastelloy B2
B2
Ni Mo 28
2.4617
NI0665
230
99
-200
450
9.20
Hastelloy C276
C276
Ni Mo 16 Cr 15 W
2.4819
NI0276
210
95
-200
450
8.90
Titanium
Ti2
Ti 99.8
3.7025
TA2
R50400
215 approx
96
-250
350
4.50
* Brinell hardness measured with 3000kg, and
10mm diameter hardened steel ball.
Softer materials i.e. copper & brass are measured
with 500kgs and 10mm diameter hardened
steel ball.
* Rockwell B hardness is measured with 100kg
and 1.60mm diameter steel ball.
Novus Ring Type Joints
23O
Novus M8 Model R Oval and
Novus M9 Model R Octagonal Ring Type Joints
API Specification 6A Dimensional Data
A
Pressure Class Ratings
Ring
Number
ASME/ANSI B16.5
150
300/600
900
API 6A
1500
2500
2000
3000
ASME B16.47 Series A
5000
150
300/600
900
Pitch
Diameter
of Ring
P
Nominal Pipe Sizes (inches)
R11
R12
R13
R14
R15
R16
R17
R18
R19
R20
R21
R22
R23
R24
R25
R26
R27
R28
R29
R30
R31
R32
R33
R34
R35
R36
R37
R38
R39
R40
R41
R42
R43
R44
R45
R46
R47
R48
R49
R50
R51
R52
R53
R54
R55
1/2
3/4
3/4
1/2
3/4
1
1
3/4
1.1/4
1.1/4
1.1/4 1.1/4
1.1/2
1.1/2 1.1/2
1.1/2
1.1/4
2
2
2
1.1/2 2.1/16
2.1/16 2.1/16
2.1/2
2
2.1/2
2.1/2 2.1/2
2.9/16 2.9/16
2.9/16 2.9/16
2.1/2
3
3
3
3.1/8
3.1/8
3
3.1/2
3.1/2
3
3.1/8
4
4
4.1/16 4.1/16
4
4
4.1/16
5
5
5
5
6
5
6
7.1/16 7.1/16
6
7.1/16
6
8
8
9
8
10
10
10
11
10
11
11
10
Width
of
Ring
A
Height of Ring
Oval
B
Octagonal
H
Approx
distance
between
made up
flanges
Dimensions in Millimetres
1/2
1/2
Tolerances (Inches)
A (width of ring) + or - 0.008
B,H (height of ring) + or - 0.020
P (average pitch diameter of ring) + or - 0.007
23O (angle) + or - 0.5O
34.13
39.69
42.86
44.45
47.63
50.80
57.15
60.33
65.09
68.28
72.23
82.55
82.55
95.25
101.60
101.60
107.95
111.13
114.30
117.48
123.83
127.00
131.76
131.76
136.53
149.23
149.23
157.16
161.93
171.45
180.98
190.50
193.68
193.68
211.15
211.15
228.60
247.65
269.88
269.88
279.40
304.80
323.85
323.85
342.90
6.35
7.95
7.95
7.95
7.95
7.95
7.95
7.95
7.95
7.95
11.13
7.95
11.13
11.13
7.95
11.13
11.13
12.70
7.95
11.13
11.13
12.70
7.95
11.13
11.13
7.95
11.13
15.88
11.13
7.95
11.13
19.05
7.95
11.13
11.13
12.70
19.05
7.95
11.13
15.88
22.23
7.95
11.13
15.88
28.58
11.10
14.30
14.30
14.30
14.30
14.30
14.30
14.30
14.30
14.30
17.50
14.30
17.50
17.50
14.30
17.50
17.50
19.10
14.30
17.50
17.50
19.10
14.30
17.50
17.50
14.30
17.50
22.40
17.50
14.30
17.50
25.40
14.30
17.50
17.50
19.10
25.40
14.30
17.50
22.40
28.60
14.30
17.50
22.40
36.50
19.50
12.70
12.70
12.70
12.70
12.70
12.70
12.70
12.70
12.70
15.90
12.70
15.90
15.90
12.70
15.90
15.90
17.50
12.70
15.90
15.90
17.50
12.70
15.90
15.90
12.70
15.90
20.60
15.90
12.70
15.90
23.90
12.70
15.90
15.90
17.50
23.90
12.70
15.90
20.60
27.00
12.70
15.90
20.60
34.90
Notes: End flanges to API 6D and API 600 use ring joints for equivalent pipe size under ASME/ANSI B16.5 or ASME B16.47 series A
R30 is only suitable for lapped flanges.
4.1
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.1
4.8
4.1
4.8
4.1
Approx Weight KGs
Oval
Octagonal
0.05
0.10
0.11
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.30
0.21
0.35
0.40
0.25
0.43
0.46
0.58
0.29
0.50
0.52
0.66
0.33
0.56
0.58
0.37
0.63
1.18
0.69
0.43
0.76
1.94
0.48
0.82
0.89
1.10
2.22
0.62
1.14
2.03
3.72
0.76
1.37
2.43
7.48
0.05
0.09
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.30
0.19
0.34
0.39
0.23
0.42
0.44
0.57
0.26
0.48
0.51
0.65
0.30
0.54
0.56
0.34
0.61
1.15
0.66
0.40
0.74
1.91
0.45
0.79
0.86
1.08
2.29
0.57
1.10
1.99
3.40
0.70
1.33
2.39
7.81
Novus Ring Type Joints
23O
Novus M8 Model R Oval and
Novus M9 Model R Octagonal Ring Type Joints
(continued)
API Specification 6A Dimensional Data
Pressure Class Ratings
Ring
Number
R56
R57
R58
R59
R60
R61
R62
R63
R64
R65
R66
R67
R68
R69
R70
R71
R72
R73
R74
R75
R76
R77
R78
R79
R80
R81
R82
R84
R85
R86
R87
R88
R89
R90
R91
R92
R93
R94
R95
R96
R97
R98
R99
R100
R101
R102
R103
R104
R105
ASME/ANSI B16.5
150 300/600
API 6A
3000
5000
2000
900 1500 2500
Nominal Pipe Sizes (inches)
12
ASME B16.47 Series A
150
300/600
900
12
12
14
12
14
14
14
16
16
16.3/4
16
16
16
18
18
18
18
18
20
20
21.3/4
20
Pitch
Diameter
of Ring
P
Width
of
Ring
A
Height of Ring
Oval
B
Octagonal
H
Approx
distance
between
made up
flanges
Dimensions in Millimetres
13.5/8 13.5/8
12
Tolerances (Inches)
A (width of ring) + or - 0.008
B,H (height of ring) + or - 0.020
P (average pitch diameter of ring) + or - 0.007
23O (angle) + or - 0.5O
20.3/4
20
24
24
24
24
22
22
26
28
30
32
34
36
26
28
30
32
34
36
381.00
381.00
381.00
396.88
406.40
419.10
419.10
419.10
454.03
469.90
469.90
469.90
517.53
533.40
533.40
533.40
558.80
584.20
584.20
584.20
673.10
692.15
692.15
692.15
615.95
635.00
57.14
63.50
79.38
90.50
100.03
122.83
114.30
155.58
260.25
228.60
749.30
800.10
857.25
914.40
965.20
1019.18
234.95
749.30
800.10
857.25
914.40
965.202
1022.35
7.95
11.13
22.23
7.95
31.75
11.13
15.88
25.40
7.95
11.13
15.88
28.58
7.95
11.13
19.05
28.58
7.95
12.70
19.05
31.76
7.95
15.88
25.40
34.93
7.95
14.29
11.13
11.13
12.70
15.88
15.88
19.05
19.05
22.23
31.75
11.13
19.05
19.05
19.05
22.23
22.23
22.23
11.13
28.58
31.75
31.75
31.75
34.93
34.93
14.30
17.50
28.60
14.30
39.70
17.50
22.20
33.30
14.30
17.50
22.20
36.50
17.30
17.50
25.40
36.50
14.30
19.10
25.40
39.70
14.30
22.40
33.30
44.50
12.70
15.90
27.00
12.70
38.10
15.90
20.60
31.80
12.70
15.90
20.60
34.90
12.70
15.90
23.90
34.90
12.70
17.50
23.90
38.10
12.70
20.60
31.80
41.30
12.70
19.10
15.90
15.90
17.50
20.60
20.60
23.90
23.90
26.90
38.10
17.50
23.09
23.09
23.09
27.00
27.00
27.00
15.90
34.90
38.10
38.10
38.10
41.30
41.30
Notes: End flanges to API 6D and API 600 use ring joints for equivalent pipe size under ASME/ANSI B16.5 or ASME B16.47 series A
4.8
5.6
4.8
4.1
4.8
4.8
3.3
4.8
Approx Weight KGs
Oval
Octagonal
0.95
1.61
5.07
0.99
10.65
1.77
3.15
7.45
1.14
1.98
3.53
10.25
1.30
2.27
5.48
11.75
1.40
3.03
5.95
15.31
1.68
5.20
12.30
22.40
0.88
1.56
5.12
0.92
11.72
1.72
3.09
7.52
1.05
1.92
3.46
10.71
1.19
2.20
5.40
12.27
1.29
2.99
5.86
16.20
1.55
5.10
12.66
22.98
1.41
3.92
0.23
0.26
0.44
0.66
0.72
1.24
1.15
2.06
6.83
0.92
7.52
8.03
8.60
12.29
13.24
13.74
0.95
17.08
22.19
22.47
23.78
32.05
33.95
4.8
4.8
3.3
4.1
4.1
4.8
4.8
4.8
4.1
7.63
8.16
8.73
12.16
13.10
13.59
4.8
16.35
20.97
22.47
23.97
31.24
33.10
NOVUS SEALING
OVERSEAS OPERATIONS
Novus Sealing Pty Ltd
15 Vinnicombe Drive
Canning Vale
Perth
Western Australia 6155
T: + 61 (08) 9455 2155
F: + 61 (08) 9455 2165
E: [email protected]
www.novussealing.com.au
Novus Sealing Technology
(Shanghai) Co. Ltd
Bld 1, No. 1069,
Xuanzhen (E) Road
Nanhui Industrial Park
Shanghai
P.R. China
T: + 86 (0) 21 6608 0973
F: + 86 (0) 21 6608 0977
E: [email protected]
www.novussealing.com.cn
www.novusproducts.eu
Novus Sealing SA
15 Coert Steynberg Street
Van Eck Park Extension 2
Brakpan, Gauteng
South Africa
T: + 27 (0) 11 915 0016
F: + 27 (0) 11 915 0940
E: [email protected]
www.novussealing.co.za
Novus Sealing Caspian LLP
7v Atambayev Street
Atyrau, 060005,
Republic of Kazakhstan
T: + 7(7122) 251103
F: + 7(7122) 252835
E: [email protected]
www.novussealingcaspian.com
Novus Sealing Middle East LLC
PO Box 6591, Al Jazeera
Warehouse WIZ04-30 & 32
Al Hamra Warehouse Area
Ras Al Khaimah
United Arab Emirates
T: + 971 (0)7 243 4305
F: + 971 (0) 7 243 4306
E: [email protected]
www.novussealing.ae
Novus Sealing (M) SDN BHD
Plo 232
Kawasan Perindustrian
Tebrau III
81100 Johor Bahru
Johor Darul Takzim
Malaysia
T: + 607 351 3910
F: + 607 357 9910
E:
[email protected]www.novusealing.my
Novus Sealing Nigeria Ltd
Plot 29A, Elelenwo Street
GRA Phase 1, Port Harcourt
Rivers State
Nigeria
T: + 234 (0) 84 901022
E:
[email protected]www.novussealing.com.ng
Jan 2013 - Rev 2
UK OFFICE
Flexitallic Ltd
Scandinavia Mill
Hunsworth Lane
Cleckheaton
West Yorkshire BD19 4LN
England, UK
T: + 44 (0)1274 851273
F: + 44 (0)1274 300303
E: [email protected]
www.flexitallic.eu
