Scribd
Upload
196 views5 pages

Fatigue Test Design

Fatigue testing machines are generally used for various research and laboratory test work each of which has its unique design features as per the size of specimen and type of loading. Reversed bending machines have been developed by several researchers all which operate mechanically or electromagnetically.

Uploaded by

amir_hom
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
196 views5 pages

Fatigue Test Design

Fatigue testing machines are generally used for various research and laboratory test work each of which has its unique design features as per the size of specimen and type of loading. Reversed bending machines have been developed by several researchers all which operate mechanically or electromagnetically.

Uploaded by

amir_hom
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

InternationalConferenceonShot PeeningandBlast Cleaning

DESIGN AND DEVELOPMENT OF A REVERSED BENDING FATIGUE TESTING EQUIPMENT FOR LABORATORY USE
L.N. Ojha H.B. Khurasia A.D. Telang Maulana Azad College of Technology, Bhopal, India ABSTRACT The fatigue testing of welded components is expensive, time consuming and requlres larger capacity equipment. The method of loading should simulate to loading condition, that is likely to occur in service. With this in view, a reversed bending fatigue testing machine, was designed and developed with required control circuits and test specimens. 1. INTRODUCTION Fatigue testing machines are generally used for various research and laboratory test work each of which has its unique design features as per the size of specimen and type of loading. Reversed bending machines have been developed by several researchers all which operate mechanically or electromagnetically. All fatigue systems, regardless of complexity, consist of the common basic elements, such as The loading train , Power supply and Controls. Different excitations considered are compared belowas in table 1. The circular cam or eccentric cam was found to be most suitable for the use. Table 1. Excitations Criterion Vertical crank Horizontal crank Adjustable I Complex I Not easy II Flexible I Structure Delicate I Delicate I Circular cam or eccentric Adjustable I Simple II Complex I Flexible I Strong II

Adjustable I Design Complex I

A specimen is representative sample of the material under investigation and its type used depends on the objective of the investigations, availability of the testing equipment and the formof material. The fatigue test specimen consists essentially of three parts.The centreortest section of which is the regionwhere the required test conditions are simulated as closely as possible, and the two ends, which serve only to transfer the local load from the grips, into the centre section.
Two criteria for the design of specimen are that the failure should occur in the test section and the unintentional stress raisers should be avoided. Inaddition, it isdesirable thatthe dimensionsof thesectionshould besuch that, the loads required are not disproportionately low with respect to the capacity ofthemachine, and the naturalfrequency ofthespecimen iswell removedfrom the machine. The obtained dimensions, their ratios, tolerances for the designed specimen are tabulated below as irl table - 2. Table 2. The obtained dimensions D~mens~on (mm) Overall length(L) Transition length&) Transition radius (A) Overall width (6) rest section width(b) Sample thickness(t) Sripping length(GL) Pin hole diameter (D) +ole distance (e) Value Ratlo Value llrnit Portion (mm) 120 20 2 12 Rlb Ub 34
3.4

Accuracy (+I- %) 0 100 0.025 0.025

8 3 2 2-6

General Test section Concentricity

BGUbt 3.0 blt e/D GUD 1.0 0.5 1.5

Total Ind.Read. 0.012 0.01 2-0.005

6
6

1.5-2 Rootradius 3

Measurements 1.0

9 btsq.mm 28

13-325

6
3

The standard force-deflection(F-D) relations for the cantilever beam specimen are tabulated below as in table 3.

Table 3. The F-D relations

1~.~o.l~ixed I
1. 2. 3. 4. dl1.l.l F.1 F 720 cu mm

Middle 5FI48EI F1/2 F 240 cu mm

Free end F/3EI 0 F 720;~ mm

I
I

Quantities Deflection BM SF Z

The force Fat middle of the specimen will be given as 158 = (F x 15012) / 240 or F = 505 N The corresponding fixed end stress and the deflections at middle and free end willbe(505x150)1720=105MPa,and[5x505x150x150x150]/[48x2.I x100000x(l0x12x12x12)/12]=0.60mmand[505x150x150x150]/ [3 x 2.1 x 100000 x (30 x 12 x 12 x 12) / 121 = 0.63 mm respectively. The maximum eccentricity = 25 mm, and the force at free end corresponding thiswillbegivenby25=[Fx150x150x150]/[3x2.Ix100000x(30x1212 x 12 x 12 1121 = 20.16kN. This will be devolved by the eccentric and w~ll be transmitted to the free end of the specimen through the connecting rod. Effective length I = 210 mm and the mean radius r = 10 mm, for l/r = 21, fc = 136.7MPa hencethe load carrying capacity of the collecting rod =[3.147x (2Ox 20) x 136. 71 1 4 = 42.95 kN. The maximum tensile and share stresses in eccentric will be = [ 2 x 20.16 x 10 x10x10]/[3.14x80x20]=8MPa.and=[2x20.16x1010x10]/[80x20] = 12.6 MPa, while the bending stress = [20.16 x 10 x 10 x 10 121/ [20 x 30 x 30 161 = 131 MPa. The maximum SF at the left and right the shaft will be [20.16 x 10 x 10 x 10 x 1 0 x 6 ] / 1 6 = 7 . 5 6 kN, & [2O.l6x l o x l o x l o x 1 0 ] / 1 6 = 12.60 kN. Therefore, the max. bending moment BM = 7.56 x 0.10 = 0.756 kNm. Hence the bending and share stresses in the shaft will be [0./56 x 1000000]/ [30x30x30/6]=168and[20.16xl0xl0xl0]/[30x30x30]=22.4MPa respectively. The elapsed time in two million cycles @ 1400rpm will be [2 x 1000000]/ [ I 400 x 60) = 24 hours. 244

2. DISCUSSION

The design was revised secondly due to the frictional heat generation between cam and supporting sliding.

Fig. 1. Flexure1fatigue testing machine


Theoil cooling was not found to besaiisfactory, hence the sliding was replaced through a roller bearing between the eccentric and eccentric sieve. This was also not found to be satisfactory then these were replaced with a eccentric flaiige and the connecting rod through the vertical sliding. The preliminary performance of this design was found to be satisfactory. The designed data are tabulated below as in table 4. 245

Table 4. Designed data Exciter Excitation frequency Average specimen length Maximum static force Maximum displacement Power supply Weight approximately Overall size ACKNOWLEDGEMENT CSIR-IndiaandMACTBhopa1, aregratefullyacknowledgernent forgranting the fellowship and providing research facilities respectively.
3. REFERENCES

Eccentric 1400 rpm 180 mm, adjustable 20 kN, adjustable 25 mm, adjustable 0.75 kw, 3ph, 440V, 50 Hz
50 kg

750 x 200 sq mm & 500 mm high

Anon 1949. Manual on Fatigue testing ASTM STP : 51. Welch W.A. and Wilson W.A. 1941. A New high temperature fatigue machine Proc. ASTM-41 : 33. Dolan T.J. Electrically excited resonant type fatigue testing equipment ASTM Bull No. 115, 195. Handbook of fatigue testing ASTM-STP-566 Gurney T.R. 1968. Fatigue of welded structures. Cambridge at the University Press.

You might also like