Scribd Logo
Upload

Welcome to Scribd!

  • 83 views

    DME1

    Uploaded by

    Ganesh Ram
    This document contains questions for an exam on machine element design. It includes questions about design processes, failure theories, stress concentration reduction methods, types of joints and couplings, springs, bearings, shafts, keys, and flywheels. It asks students to calculate sizes and ratings for various mechanical components based on given load and material properties. The questions cover analytical concepts and calculations for machine elements.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    DME1

    Uploaded by

    Ganesh Ram
    83 views3 pages
    This document contains questions for an exam on machine element design. It includes questions about design processes, failure theories, stress concentration reduction methods, types of joints and couplings, springs, bearings, shafts, keys, and flywheels. It asks students to calculate sizes and ratings for various mechanical components based on given load and material properties. The questions cover analytical concepts and calculations for machine elements.

    Original Description:

    DME

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains questions for an exam on machine element design. It includes questions about design processes, failure theories, stress concentration reduction methods, types of joints and couplings, springs, bearings, shafts, keys, and flywheels. It asks students to calculate sizes and ratings for various mechanical components based on given load and material properties. The questions cover analytical concepts and calculations for machine elements.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    83 views3 pages

    DME1

    Uploaded by

    Ganesh Ram
    This document contains questions for an exam on machine element design. It includes questions about design processes, failure theories, stress concentration reduction methods, types of joints and couplings, springs, bearings, shafts, keys, and flywheels. It asks students to calculate sizes and ratings for various mechanical components based on given load and material properties. The questions cover analytical concepts and calculations for machine elements.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    ANNA UNIVERSITY OF TECHNOLOGY, COIMBATORE B.E. I B.TECH.

    DEGREE EXAMINATIONS: APRIL I MAY 2011 REGULATIONS: 2007 FIFTH SEMESTER _

    070120059 - DESIGN OF MACHINE ELEMENTS (COMMON TO MECHANICAL I METALLURGICAL ENGG.) Time: 3 Hours PART-A (20 x 2 = 40 MARKS) ANSWER ALL QUESTIONS Max.Marks: 100

    1. 2. 3. 4 5. 6 7. 8 9 10. 11. 12. 13. 14. 15 16. 17. 18

    What are the various phases of design process? State St.Venant's theory of failure. What are the methods to reduce stress concentration? Define Stiffness and Resilience? Differentiate between keys and splines. What are advantages of gear coupling? Mention the applications of spline coupling. What is a coupling? How is a bolt designated? Give examples? When edge preparation is need? State the advantages of threaded joints? What are the general applications of welding? State any two functions of springs? What is a lever? Give some of the materials used for springs? What are the uses of foot levers? What is a Journal bearing? List any two applications? What is the function of the flywheel?

    19. 20.

    State the disadvantages of thrust ball bearing? Define coefficient of fluctuation of energy?
    PART - B (5 x 12 = 60 MARKS) ANSWER ANY FIVE QUESTIONS

    21 Determine the diameter of a circular rod made of ductile material with an endurance limit of 25 MPa and tensile yield strength of 350 MPa. The member is subjected to a varying axial load from-300 kN to 700 kN and has a stress concentration factor is 1.8. Take factor of safety as 2.

    22. A steel member is subjected to a 3 dimensional stress system and the resulting principal stresses are 120 N/mm2 tension, 80 N/mm2 and 40 N/mm2 compression. If the proportional limit of the material in simple tension is 280 N/mm and its poisqn's ratio is 0.3 determine the factor of safety according to a) Maximum principal stress theory b) Maximum principal strain theory and c) Maximum shear stress theory.
    2

    23. A solid circular shaft is subjected to a bending moment of 3000 N-m and torque of 1000 Nm. The shaft is made of 45C8 steel having ultimate tensile stress of 700 MPa and an ultimate shear stress of 500 MPa. Assuming a factor of safety as 6, determine the diameter of the shaft.

    24. Determine the dimensions of the rectangular sunk key made up of mild steel for an 80 mm diameter mild steel shaft to transmit a torque of 135 N-m. Assume shear stress 50 N/mm and crushing stress 120 N/mm .
    2 2

    25. A semi elliptical spring has 10 leaves with two full length leaves extending 650 mm. It is 65 mm wide and is made of 7 mm thick Design a helical spring, with mean coil diameter 100 mm, which will have approximately the san:,e values of induced stress and deflection for any load.

    26. A 50 mm diameter solid shaft is welded to a flat plate by 8 mm fillet weld. Determine the maximum torque that the welded joint can sustain if the permissible shear stress intensity in the weld material is not exceeding 70 MPa.

    27. A multi cylinder engine is to run at a constant load at a speed of 600 rpm. On drawing the crank effort diagram to scale of 1 mm=250 N-m and 1 mm= 30, the areas in square mm above and below the mean torque line were measured and found to be in order +160, -172, +168, -191, +197 and -162. The speed is to be kept within 1% of the mean speed of the engine. Determine the moment of inertia of the flywheel.

    28. Design a journal bearing for a centrifugal pump to the following specifications. Diameter of the Journal=75 mm Speed of the journal=1140 rpm Load on each journal=11500 N.

    *****THE END*****

    You might also like