Scribd Logo
Upload

Welcome to Scribd!

  • 93 views

    P&B Push To Reset Only

    Uploaded by

    pablo_bas99
    W58 Series is UL 1077 Recognized as Supplementary Protectors, File E69543 and meets Ignition Protection requirements in accordance with UL 1500. Breaker will continuously carry 100% of rated load, but must trip at 145% at 25degC.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    P&B Push To Reset Only

    Uploaded by

    pablo_bas99
    93 views3 pages
    W58 Series is UL 1077 Recognized as Supplementary Protectors, File E69543 and meets Ignition Protection requirements in accordance with UL 1500. Breaker will continuously carry 100% of rated load, but must trip at 145% at 25degC.

    Original Title

    P&B Push to Reset Only

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    W58 Series is UL 1077 Recognized as Supplementary Protectors, File E69543 and meets Ignition Protection requirements in accordance with UL 1500. Breaker will continuously carry 100% of rated load, but must trip at 145% at 25degC.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    93 views3 pages

    P&B Push To Reset Only

    Uploaded by

    pablo_bas99
    W58 Series is UL 1077 Recognized as Supplementary Protectors, File E69543 and meets Ignition Protection requirements in accordance with UL 1500. Breaker will continuously carry 100% of rated load, but must trip at 145% at 25degC.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Catalog 1308242 Issued 3-03 (PDF Rev.

    12-08)

    W58 series
    P&B Push To Reset Only Thermal Circuit Breaker

    Features
    0.5 amp to 30 amp ratings. Cannot be manually tripped. Button extends for visual trip indication. Push button to reset breaker. Termination is screw or .250 QC. Bottom marked amperage rating optionally available.

    Maximum Resistance vs. Current Rating @ +25C


    Current Rating in Amps 0.5 1 2 3 4 5 6 7
    *No UL/CSA

    Agency Approvals
    W58 Series is UL 1077 Recognized as Supplementary Protectors, File E69543 and meets Ignition Protection requirements in accordance with UL 1500. W58 Series is also CSA Accepted as Supplementary Protectors (Appliance Component Protectors), File LR15734.
    Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to confirm the product meets the requirements for a given application.

    Maximum Resistance in Ohms 5.0 1.35 0.32 0.18 0.10 0.026 0.026 0.020

    Current Rating in Amps 8 9 10 12 15 20 25 30*

    Maximum Resistance in Ohms 0.020 0.020 0.014 0.010 0.010 0.005 0.006 0.004

    Mechanical/Environmental Data Electrical Data @ +25C


    Calibration: Breaker will continuously carry 100% of rated load. It may trip between 101% and 145% of rated load, but must trip at 145% at 25C. Dielectric Strength: Over 1,500 volts RMS. Maximum Operating Voltages: 50VDC; 250VAC. Interrupt Capacity: 2,000 amps at 50VDC (0.5 - 30 amp models). 1,000 amps at 250VAC (0.5 - 30 amp models). Note: 30 amp model not UL or CSA. Resettable Overload Capacity: Ten times rated current. Shock: Withstands to 10g. Endurance Cycling: Over 1,000 cycles at 200% of rated load. Vibration: Withstands to 10g at 10-55 Hz. Weight: Less than 1 1/2 oz. (42.5g).

    Time vs. Current Trip Curve @ +25C


    1000
    (A) All 5-30 Amp Models (B) All 1-4 Amp Models
    Overload Trip Times

    Ambient Compensation Chart


    1.40
    Overload Trip Times

    900 800 (A)

    1.30

    Load Current As A Percent Of Breaker Rating

    Correction Factor

    700 600 500 400 300 200 100 0 .1 1 10

    100% 145% 200% 400% 600% 800% 1000%

    No Trip Trip in 1 hour 6.0-30 Sec. 1.6-4.5 Sec. 0.60-1.7 Sec. 0.25-0.90 Sec. 0.15-0.65 Sec.

    100% 145% 200% 400% 600% 800% 1000%

    No Trip Trip in 1 hour 10-45 Sec. 3.0-14.0 Sec. 1.4-7.0 Sec. 0.75-4.3 Sec. 0.50-3.4 Sec.

    1.20 1.10 1.00 0.90 0.80 0.70 0.60 20 10 0 10 20 30 40 50 60

    (B)

    Ambient Temperature In Degrees Centigrade (C)

    100

    1000

    Time In Seconds

    To use this chart: Read up from the ambient temperature to the curve, and across to find a correction factor. Multiply the breaker rating by the correction factor to determine the compensated rating. Calculate the overloads in terms of the compensated rating to use the published trip curve.

    Revised 12-08 www.tycoelectronics.com

    Dimensions are in inches over (millimeters) unless otherwise specified.

    Dimensions are shown for reference purposes only. Specifications and availability subject to change.

    USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803

    South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080208

    Catalog 1308242 Issued 3-03 (PDF Rev. 12-08)

    Ordering Information
    Typical Part No. 1. Designator: W = Circuit breaker 2. Series Number: 58 = Single Pole, Push-to-Reset 3. Circuit Function: X = Series Trip 4. Button and Rate Marking: A = White, plain, no rate marking, no trip band B = White with red rate marking, red trip band C = White with black rate marking, red trip band E = White with red rate marking no trip band F = White with black rate marking, no trip band K = Black, plain, no rate marking, red trip band

    >

    58

    -X

    -5

    Note: Rate marking on the bottom of the case is available on a special order basis. Consult factory for details.

    5. Mounting Bushing: 1 = Metal, 7/16 x .500 (12.70mm) long 4 = Metal, 15/32 x .300 (7.62mm) long, black 6 = Metal, 3/8 x .465 (11.81mm) long, round 6. Terminals: A = Quick connect .250 (6.35mm) straight C = 6/32 screw 90 (screws installed) D = 6/32 screw 90 (screws bulk packed) 7. Mounting Hardware: 4 = Metal, knurled nut/hex nut 6 = Metal, knurled nut/hex nut/lock washer 12 = Metal, knurled nut/lock washer 15 = Metal, two hex nuts/lock washer 18 = Metal, hex nut/lock washer

    7 = Plastic, 3/8 x .465 (11.81mm) long, round

    22 = Plastic knurled nut, metal lock washer

    99 = No mtg. hardware supplied (Use C, Step #8)

    Note: For other hardware combinations, order separately. See mounting hardware Ordering Information table.

    8. Mounting Hardware Packaging: A = Assembled to bushing B = Bulk unassembled C = No mounting hardware 9. Specify Amp Rating: 0.5 3 6 1 4 7 2 5 8 9 10 12 15 20 25 30*
    *Not UL or CSA

    Stock Items Authorized distributors are more likely to stock the following items.
    W58-XB1A4A-1 W58-XB1A4A-2 W58-XB1A4A-3 W58-XB1A4A-4 W58-XB1A4A-5 W58-XB1A4A-6 W58-XB1A4A-7 W58-XB1A4A-8 W58-XB1A4A-10 W58-XB1A4A-12 W58-XB1A4A-15 W58-XB1A4A-20 W58-XB1A4A-25 W58-XB1A4A-30 W58-XC4C12A-1 W58-XC4C12A-2 W58-XC4C12A-3 W58-XC4C12A-5 W58-XC4C12A-7 W58-XC4C12A-10 W58-XC4C12A-15 W58-XC4C12A-20 W58-XC4C12A-25 W58-XC4C12A-30

    Outline Dimensions
    Terminal Options
    .050 MAX. (1.27) CLOSED POSITION CODES 1 & 4 .312.005 (7.92.13) 1.375 (34.93) 15 1.375 (34.93) .425 (10.80) .850 (21.59) .250 (6.35) x .032 (.81) QUICK CONNECT TERMINALS .415 (10.54)

    .440 (11.18) .425 .850 (10.80) (21.59)

    1.375 (34.93)

    .250 (6.35) CODE 6 SEE TERMINAL DRAWINGS SEE MOUNTING FOR DETAIL BUSHING AND MOUNTING HARDWARE DRAWINGS FOR DETAIL .281 MAX. (7.14) OPEN POSITION BUTTON

    A
    .187 (4.75)

    .440 (11.18)

    .660 (16.76)

    .312 TYP. (7.92)

    C&D

    .156 .85 (3.96) (21.6) #6-32 SCREW & LOCK WASHER ASSEMBLY

    Revised 12-08 www.tycoelectronics.com

    Dimensions are in inches over (millimeters) unless otherwise specified.

    Dimensions are shown for reference purposes only. Specifications and availability subject to change.

    USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803

    South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080208

    Catalog 1308242 Issued 3-03 (PDF Rev. 12-08)

    Mounting Hardware
    Hex Nut Knurled Nut Lockwasher
    ALTERNATE TEETH TWISTED IN OPPOSITE DIRECTIONS STRAIGHT KNURL 24 PITCH

    Mounting Hardware Dimensions


    Metal Dimension Hex Nut 3/8 .556 (14.12) A. 7/16 15/32 .625 (15.88) .556 (14.12) .085 (2.16) .111 (2.82) .078 (1.98) Metal Knurled Nut .562 (14.27) .625 (15.88) .625 (15.88) .078 (1.98) .125 (3.18) .125 (3.18) Plastic Metal Knurled Nut Lockwasher .74 (18.8) .562 (14.27) .126 (3.2) .540 (13.72) .600 (15.24) .018 (.457) .022 (.559) .018 (.457)

    FLAT

    3/8 B. 7/16 15/32

    B B B

    Mounting Hardware Ordering Information


    Mounting Bushing Code 1 4 6 7 Metal Knurled Nut 55-010A 55-008A 55-008A Plastic Knurled Nut 1423696-2 Metal Hex Nut 55-011A 55-001B 55-001D 55-001D Metal Lock Washer 88-021B 88-002A 88-006K 88-006K

    55-010B (silver) 55-010E (black)

    Mounting Bushing
    Type 1
    Recommended Cutout

    Optional Protective Boot


    Silicone rubber boot is bonded to integral alumimum nut. 1-1423696-5 Black boot for W58 with 3/8-24 bushing.
    .622 (15.8)

    .440 - .450 DIA. (11.2 - 11.4)

    .63 DIA. (16.0)

    7/16-28 THREAD (SILVER)

    Type 4
    .300 (7.62) .470 - .480 DIA. (11.9 - 12.2)

    Optional Bottom Marking of Rating


    This is available on a special order basis. Consult factory for details.

    15/32-32 THREAD (BLACK)

    Type 6
    .465 (11.81) .370 - .380 DIA. (9.4 - 9.7)

    3/8-24 THREAD (SILVER)

    Type 7
    .465 (11.81) .370 - .380 DIA. (9.4 - 9.7)

    3/8-24 THREAD (BLACK)

    2008 by Tyco Electronics Corporation. All Rights Reserved. P&B, TE logo and Tyco Electronics are trademarks. Revised 12-08 www.tycoelectronics.com Dimensions are in inches over (millimeters) unless otherwise specified. Dimensions are shown for reference purposes only. Specifications and availability subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080208

    You might also like