What is Hot Tapping?

A Hot Tap is defined as using a drilling machine to cut a hole into an in-service, under-pressure piping system. This is done without service interruption or product leakage. Typical applications of a Hot Tap include making a branch connection, initiating a bypass and allowing performance of a Line Stop. Components required to perform a Hot Tap normally include a fitting designed to contain system pressure, a valve used to control the new connection and a drilling or tapping machine. Hot/Wet/Cold Tap and Line Stopping/Plugging services allow our client to modify, maintain and repair pressurized systems with no interruption of production. As a recognized leader in the Hot/Wet/Cold Tapping and Line Stopping/Plugging services business, EA Services strives to provide the highest level of customer satisfaction to the water and waste water, commercial building, industrial piping, process facilities, mining, power generation, paper, pulp, refining, petrochemical, liquid and gas transmission pipelines and offshore markets. Our equipment and service technicians are prepared to meet any challenge // whether it be emergency, planned or routine maintenance activities of our clients.

Hot Tap Capabilities

Available in size ranges / inch through inch diameter cut sizes and a boring bar stroke (reach) of over inches. Available off the shelf for up to psig maximum operating pressure and temperatures as high as F. Custom designs and packers offered for higher system requirements. Power driven with pneumatic or hydraulic drives featuring a new level of sophistication and dependability. Complete dimensional compatibility with industry standards of consumables and equipment. This means that most other major brands of cutters, pilot drills, holders, adapters, etc. will also fit onto our new generation of equipment. Install pig sigs and thermowells.

Hot tapping is a process of cutting holes into pipe, tanks, or any pressurized vessel without interrupting system function and with no release or loss of product. Hot taps permit new tie-ins to existing systems, the insertion of devices into the flow stream, permanent or temporary bypasses, and are the preparatory stage for line plugging. Angle hot tapping: This procedure refers to any hot tap where the centerline of the tapping nozzle is not perpendicular to the surface being tapped. Before welding, contact EA Services to discuss degree of angulation and the possible need for a centering device to stabilize the pilot drill. We are currently equipped to perform angle taps in sizes " through ", as much as off perpendicular, and into the heel of short or long radius ells. Tapping blind flanges and heavy-wall vessels: Hot tapping heavy-wall vessels and blind flanges is not a problem, provided special issues are addressed in the design of the branch connection. Please consult EA Services prior to welding to discuss these considerations. Tapping materials other than carbon steel: In addition to carbon steel, we commonly tap cement lined pipe, transite, cast iron, stainless steel and other alloys, plastic and fiberglass. Although we tap these materials frequently, additional information such as the thickness and composition of linings, hardness of alloys, or type of fitting and valve through which we will be operating may be needed to insure that proper equipment is provided for your job. Tapping materials that can not be welded: If it is necessary to tap or plug a line that cannot be welded, such as cast iron, transite, or even carbon steel in an area where welding is not permitted, a bolt-on tapping or plugging

fitting can be provided. EA Services offers mechanical fittings by several quality manufacturers, giving us the latitude to provide the right fitting at the right price and delivery for your job. If a standard product does not suit your application, one can be custom fabricated that will meet your needs.

Hot Tap Photos

Hot Tap in Manufacturing Plant

" Hot Tap in Industrial Manufacturing Plant

Performing " Hot Tap

" Hot Tap

Angle Tap

Leak Sealing Services

// Routine and emergency on-stream, on-line, leak repair. Leak sealing solutions for water, air, process and steam leaks. EA Services provides our clients with engineered, innovative solutions for temperatures ranging from cryogenic to F, and pressures from vacuum to psig. Our leak repair services are supported by a staff of on call design engineers, decades of experience, proven sealants and packing, written procedures, and some of the most experienced and talented Field Technicians and Supervisors in the industry. At EA Services, we strive to provide the most cost effective and reliable leak repair solution to meet the needs of our clients. Whether it is a band clamp repair, a wire wrap of a flange or bonnet, a stock clamp or enclosure or a custom engineered solution, we offer the right repair to solve your problem fast.

Typical Applications
:

Valve Packing Leaks Flange Leak Repair Piping System Leaks

Valve Packing Leaks

Drill and Tap Valve Packing Injections and Restoration

Drill and Tap Valve Injection

Before - Steam Leak on Valve Packing

After - Repaired Steam Leak on Valve Packing

Back to Top

Flange Leak Repair

Wire Wrap

Wire Wrap on Valve end Flange "...the most cost effective, off the truck repair to flange and bonnet leaks."

Wire Wrap with Cap-nut Injection on Flange Leak

Wire Wrap with Peened Flange Gap Over Wire

Cap-nut Injection on Full Faced Flange Leak

Flange Clamps

Flange Clamps "...designed to solve even the most aggressive leaks to flanges and bonnets."

Flange Clamp with Crunch Teeth Tongue

Flange Clamp with Crunch Teeth Tongue

Flange O.D. Clamp with Packing Seal

Flange O.D. Clamp with Tubing Seal

Flange O.D. Clamp with Crunch Teeth Seal

Band Clamp with Cap-nut Stud Injection

Back to Top

Piping System Leaks

Perimeter Seal Pipe Enclosure

Packing Seal Perimeter Box Enclosure

Packing Seal Pipe Enclosure

Piping System Leaks

ELL Enclosure

Packing Seal Perimeter Enclosure

Ell Enclosure

Tee Enclosure

"...a repair solution for every shape and size, designed to provide the most cost effective solution to meet the client needs."

Packing Seal Perimeter Enclosure

Tubing Seal Perimeter Enclosure

Crunch Teeth Seal Perimeter Enclosure

Valve Enclosure with Perimeter Seal

Valve Seat Kill

Globe Valve Kill

Valve Gate Kill

Pressure Seal Injection

Custom Engineered Leak Repair Solutions

Custom Engineered Leak Repair Solutions

Hot Tapping and Line Stopping Services

EA Services is a recognized leader in the Hot Tapping and Line Stopping industry. EA provides standard design off-the-shelf equipment to perform Hot Taps from / inch to inches and Line Stops from / inch to inches. We strive to provide the highest level of customer satisfaction through service and pride ourselves on performing under the most challenging circumstances.

Typical Hot Tap and Line Stop Applications

Hot Tap

Line Stop Stock Fitting

Composite Wrap Services

Stop and repair external corrosion, dents, gouges, erosion, or other defects in piping systems with EA Services field applied composite solutions. Restore piping systems to their Maximum Allowable Operating Pressure (MAOP) regardless of surface irregularities (welds, dents, sleeves etc) piping configuration (tees, ells, reducers) internal or external wall loss. Complete and permanent repairs can also be made to vessels, tanks, welds, and infrastructure components such as bridge columns, pilings, and poles. EA Services composite wrap systems meet the engineering design requirements of DOT, ASME B./., and ASME PCC- and provide our clients with a permanent repair alternative to welded sleeves, bolt on repair clamps and or pipe replacement. The EA Services Composite Wrap for pipeline repairs allow plant owners and operators to restore corroded or eroded pipe and piping systems to original design without the expense and hassle of extended down-times. The structural system forms a pipe around a pipe, and each successive wrap increases the pressure rating. Its bidirectional weave allows for strength in both the hoop and axial directions experiencing little or no creep properties over time, ensuring that there is no reduction in strength. EA Services Composite Wrap low profile repair can be installed on tees, elbows, straight runs of pipe, confined spaces and irregular surfaces that require structural reinforcement or leak containment. The adhesive properties of the epoxy allow wrap systems to be applied to most substrates.

Typical Applications

Dented Repairs Cracked Repairs Corroded Repairs Subsea / Underwater Repairs

Stop corrosion Prevent corrosion. Save time, labor and equipment cost Extend the service life of piping and infrastructure Reduce or eliminate downtime Improve safety All pipe sizes, repair any size column, piling or tank. Compatible with Carbon, stainless, alloys, PVC fiberglass and more No VOCs Wrapped while the line is in service No line evacuation No welding of pipe No need to cut the pipe Applied to chemical, hot and volatile systems

DOT and ASME compliant

Dented Repairs

Repair of Dented Pipeline

Repair of Dented Pipeline

Dented and cracked pipe

Dented pipe

Dented and cracked pipe repaired with composite wrap

Dented Pipe

Dented Pipe repaired with Composites

Cracked Repairs

Repair of " Cracked Tee

Repair of "Out of Round" Pipeline with Composites and Repair Sleeve

Corroded Repairs

Repair of Corroded Transmission Pipeline

Repair Over Corroded Weld on Pipe

Repair of Corroded Service Pipe

Repair of Corroded Service Pipe

Repair of Corroded Service Pipe

Pitted Pipe

Repair of Pitted Pipe

Corroded " Water Line

Repair of Corroded Water Line

Corroded Service Line

Repair of Corroded Pipe

Corroded " effluent Water Line

Corroded " effluent Water Line Repaired with composites

Composite repair of bridge support

Repair of corroded " crude oil line over weld

Subsea / Under Water Repairs

Close up of Damage

Cleaning the Dented Location

Close up of Dent

Pipe Prep

Pipe after st Lay-up of Composite

After nd Lay-up of Composite

Finished Repair

Everything is OK

Field Machining Services

EA Services provides highly trained and experienced machining technicians along with the best portable machining equipment that is available today. We perform all aspects of in-place/On-site machining including pipe cutting & beveling, flange facing, milling, boring, shaft turning, grinding, drilling and tapping. We are prepared to provide our services for any scheduled construction or maintenance projects and are also available hours a day, seven days a week day a year to respond to your emergency needs. Our field technicians & branch staff have years of field machining experience and will help assure that your projects get completed quickly and correctly. We have the experience to be creative, cost effective, and anticipate problems before they happen.

Pipe Cutting and Beveling Flange Facing Boring Milling Shaft and Journal Turning

Pipe Cutting & Beveling

EA Services performs pipe cutting (severing) and beveling on diameters / through of any wall thickness. We have the capability to machine all materials including carbon steel, stainless steel, chrome, P and exotic alloys. We can provide equipment & tooling to machine weld joints to your specifications. Standard bevels, compound bevels, J-bevels and other configurations are easily achieved. When required we will counter bore the piping, valves or fittings to assure exact weld joint match ups for better weld results. Taper boring or schedule reduction to match pipe ends of different wall thickness is not a problem.

A wide range of portable machining tools allow us the option to mount and machine a variety of valves, fitting and other components. Our extensive equipment inventory also means we can work in areas that have minimal radial and axial clearances.

Flange Facing
We have the capability of machining flanges up to OD. EA Services routinely machines raised face, RTJ and tongue & groove flanges. Gasket surfaces on exchanger heads, Exchanger diaphragm removal, dollar plates, tube sheets and vessel shells are a specialty. We also are experienced in machining of gasket surfaces on nozzles, man ways and hand holes. We offer equipment that requires low axial and radial clearance envelopes. Any surface finish requirement can be met.

Milling
We have a large inventory of milling machines that will fit varying applications. Pump and motor bases are routine projects for us & are machined to your tolerances quickly and accurately. We also provide milling of other items such as dividers and exchangers, key ways in shafts and gasket surfaces on access doors. Tight tolerances and exact surface finishes are assured.

Shaft and Journal Turning

EA Services can turn shafts from through outside diameter. We can machine o-ring grooves, repair bearing surfaces, cut out of round gear seats and re-size shaft ends. Our machining methods & equipment used require only minimal disassembly of your equipment. There is no need for the shaft to rotate during the machining process. Our technicians will hold the tightest of tolerances and leave the exact surface finish required.

Field Machining Photos

Counter bore & bevel on pipe spool using clamshell

Re-machining gasket surface of tube sheet using OD mount flange facer

Re-machining access door of tank

In place machining of shaft bearing surface

Boring header nozzle flange with " boring bar

Milling of partition groove on exchanger dollar plate.

Concrete Restoration Services

EA services concrete repair division is developing products and techniques that address the changing production demands of our customers. Products that return a floor to a client quickly with no production impact are imperative. Methods and products that are environmentally friendly are desired and requested. Whether it's a dust free preparation method near a clean room or it involves a field applied structural composite reinforcement, EA has become a go to "solutions provider" for an ever changing industrial environment.

Typical Applications

Chemical and Refining City & Municipalities OEM / High Tech / DOT Painting & Blasting Public utilities Pulp & Paper

Chemical and Refining

EA Services is a known leader in the coatings industry and is committed to continue to provide our customers with the latest coatings technology to meet the stringent needs of our customers.

Chemical Containments Coatings Containment Repairs (Structural) Crack Injection (Pressure Injection) Concrete Overlays Cooling Tower Coatings Non Skid Coatings Chemical Loading / Unloading Pads Tank lining Clarifier Coatings Warehouse Floors Shower / Restroom Floor Coatings Decorative and Non Decorative

Photo Examples

City & Municipalities

All facilities are unique, whether it is a Correctional, Healthcare, Education, Wastewater treatment plant. Most facilities are occupied when applying coatings and need to have low VOCs. EA Services provides products to withstand wear and abuse for many years along with being aesthetically pleasing. Primary areas such as halls, operating rooms, classrooms, laboratories, treatment rooms, cells, pools have special requirements. Loading docks, cafeterias and exterior substrates can also present special challenges. Many facilities have multiple buildings on site including power plants, parking garages. It is critical to have products that produce minimal to no odor and low to zero VOC's. Also, products need to cure and dry quickly and last for many years. EA Services can provide you with those products.

Before & After Examples

Before

After

Before

After

Before

After

Before

After

OEM / High Tech / DOT

Protecting the floors in the manufacturing facilities has changed over the past years. It is imperative to keep the plant running at maximum efficiency for maximum profits. Unscheduled down times can cause millions of dollars in lost revenue. Areas such as secondary containment, assembly floor areas, and aircraft hangers need to be protected and aesthetically pleasing. This is where EA Services can help. EA Services offers a wide variety of products to meet our customers needs, such as non skid coatings, chemical resistant coatings, decorative and non-decorative, along with many others. No matter what the application, EA Service is up for the challenge.

Non Skid Coatings Secondary Containment Bridge Deck Sealing (non Skid) Chemical Resistant Flooring Concrete Sealing / Polishing Decorative non Decorative coatings Crack Repair / Pressure Injection Tank linings Concrete Overlays

Photo Examples

Non Skid Coatings

Secondary Containment

Bridge Deck Sealing (non Skid)

Chemical Resistant Flooring

Concrete Sealing / Polishing

Decorative non Decorative coatings

Crack Repair / Pressure Injection

Tank linings

Concrete Overlays

Painting & Blasting

EA service Company is a professional company dedicated to preserving the life of your assets with high quality paints and coatings. Weve earned a reputation as a premier painting and coating company with an extensive range of capabilities, qualified experience and equipment, with a superior work force. EA Services provides painting, coatings along with Hydro and media blasting to the following Industries:

Chemical & Refineries Pulp & Paper Industry City & Municipalities Food Processing Industry Public utilities OEM Market

EA Services are continuing to provide our customers with the latest coatings technology and service to exceed our customers expectations.

Before and After Examples

Sand Filters Before

Sand Filters After

Cogen Stack Before

Cogen Stack After

Before

After

After

Before

After

After

Public Utilities

Providing energy to the world, power and cogeneration facilities are vital to our society. In today's ever-increasing need for energy with reduced environmental effects, power and cogeneration plants need increased protection and long term performance. EA Services provides a wide variety of products to meet those requirements. Products that can provide maximum protection with minimal surface preparation, low odors, low VOC and fast cure time are in demand along with expert recommendations.

Chemical Containments Coatings Containment Repairs (Structural) Crack Injection (Pressure Injection) Concrete Overlays Cooling Tower Containment Coatings Warehouse Floors

Pulp & Paper

Protecting equipment and structures of the Pulp and Paper industry has dramatically changed over the past fifty years. Unplanned forced repairs cause expensive delays in production and can cost companies millions of dollars in revenues in just a few days. Critical areas such as the "wet end" of the paper machines, liquor tanks, clarifiers, and bleach tanks must be kept in peak condition. Downtime must be kept to a minimum. Safety is a key issue with anti-slip surfaces. These issues need to be taken in consideration along with service life when specifying a proper coatings system for the Pulp & Paper Industry. That is where EA services can help!

Chemical Containments (Acids / Caustics) Paper Machine Floors Concrete Overlays Non Skid Coatings Crack Repair / Pressure Injection for Structural Repairs Bathroom Floors Shower Floors (Color Quartz) Chemical Loading / Unloading Pads Tank Base Repair Office Floors (Flake / Color Quartz)

Before and After Examples

Concrete Overlays Before

Concrete Overlays After

Concrete Overlays Before

Concrete Overlays After

Tank Base Before

Tank Base After

PM Winder Floor After

PM Winder Floor After

Bolt Tensioning Services

EA Services has trained technicians and state of the art equipment for all your bolting needs . We offer hydraulic torque wrenches with to -/ drives to cover / through -/ stud sizes as well as heavy hex size sockets & low clearance link tools. We offer stud tensioning equipment in all sizes and ultrasonic stress measuring for critical flange documentation. When studs are damaged and must be replaced, EA Services will machine out old studs, preserving the internal threads if possible or oversize and rethread the hole if required. We can supply hands on labor & equipment, or technical support to assist your craft in using the equipment.

EA SERVICES PROVIDES:

Hydraulic Torque Wrenches /" Through -/" Stud Sizes /" Through -/" Heavy Hex Sizes Socket & Low Clearance Link Bolt Tensioning Services /" through " stud diameter Fit ANSI and API flanges % and % tensioning kits Up to , PSI Stub Removal Services Stud extraction (drilling) Drilling of holes for oversized studs Tapping of stud holes Nut Splitting Services /" through -/" nut sizes

Assembling flanges with low clearance hydraulic torque wrench

Assembling flanges using hydraulic torque wrench

Assembling flanges using hydraulic tensioning equipment

Low clearance model hydraulic torque wrench