P437 Cortec
Uploaded by
Hari Krishna.MP437 Cortec
Uploaded by
Hari Krishna.MDisclaimer
Our policy is one of continuous development. Accordingly the design of our products may change at any time. Whilst every effort is made to produce up to date literature, this document should only be regarded as a guide and is intended for information purposes only. Its contents do not constitute an offer for sale or advice on the application of any product referred to in it. We cannot be held responsible for any reliance on any decisions taken on its contents without specific advice.
Page 1 of 4
156508187.xls.ms_office
7/8/2013
CORTEC
Information required with order: Variants P437 Distance Protection Device Basic device: Basic device 84TE, pin terminal connection Basic device 84TE, ring terminal connection Basic complement with 4 binary inputs, 8 output relays and 6 function keys Mounting option and display: Surface mounted, local control panel with text display Flush mounted, local control panel with text display Current transformer: Inom = 1A / 5A (T11T14) 2) Parallel Line Mutual Compensation CT Without Inom = 0.1A (T24) Inom = 1A / 5A (T24) 2) Voltage transformer: Vnom = 50130V (4 pole) Vnom = 50130V (5 pole) Additional binary I/O options: Without With 1 binary module (add. 6 binary inputs and 8 output relays) With 2 binary modules (add. 12 binary inputs and 16 output relays) With 3 binary modules (add. 18 binary inputs and 24 output relays) With 4 binary modules (add. 24 binary inputs and 32 output relays) Order Number P4379 7 8
-308 -4xx -630 -408 -409
-46x -9 x x -9 x x -8xx
3 4
0 1 9
4 5
3)
0 1 2 3 4
Power supply and additional outputs: VA,nom = 24VDC VA,nom = 48 to 250VDC/100 to 230VAC VA,nom = 24VDC and 6 output relays, 4 with thyristor VA,nom = 48 to 250VDC/100 to 230VAC and 6 output relays, 4 with thyristor VA,nom = 24VDC and 6 output relays VA,nom = 48 to 250VDC/100 to 230VAC and 6 output relays Further additional options: Without With analogue module Switching threshold on binary inputs: >18 V (standard variant) >90 V (60 to 70% of Vnom = 125 to 150 V) 8) >155 V (60 to 70% of Vnom = 220 to 250 V) 8) >73 V (67% of VA,nom = 110 V) 8) >146 V (67% of VA,nom = 220 V) 8) With communication / information interface: Protocol can be switched between: IEC 60870-101/-103, Modbus, DNP3.0, Courier and IRIG-B input for clock synchronisation and 2nd interface (RS485, IEC 60870-5-103) For connection to wire, RS485, isolated For connection to plastic fibre, FSMA connector For connection to glass fibre, ST connector Protocol IEC 61850 For connection to 100 Mbit/s Ethernet, glass fibre SC and wire RJ45 and 2nd interface (RS485, IEC 60870-5-103) For connection to 100 Mbit/s Ethernet, glass fibre ST and wire RJ45 and 2nd interface (RS485, IEC 60870-5-103) With guidance / protection interface: Protocol InterMiCOM For connection to wire, RS485, isolated For connection to plastic fibre, FSMA connector For connection to glass fibre, ST connector For connection to wire, RS232, isolated Language: English (German) 4) 4) Px40 English (English) German (English) 4) French (English) 4) Spanish (English) 4) Polish (English) 4) Russian (English) 4)
2) 3) 4)
3 4 6 7 8 9
0 2
Without order extension -461 -462 -463 -464
-9 2
1 2 4 -9 4 6 7
-9 5 1 2 4 5
Without order extension Not yet available Not yet available - on request Not yet available - on request Not yet available - on request
-800 -801 -802 -803 -804 -805
Switching via parameter, default setting is underlined! This option is excluded if the InterMiCOM ( -95x) is ordered Second included language in brackets 7) Hardware option, supports Cyrillic letters instead of special West. European characters 8) Standard variant recommended, if higher pickup threshold not specifically required by the application
Page 2 of 4
156508187.xls.ms_office
7/8/2013
156508187.xls.ms_office
1-4
10
11
12 13
14
15
16
17
18
Fast Full Scheme Distance Protection
SAP Part Number Version
P437
4 9 9 5 3 4 0
-308
-409
-631
-462 -947
E4378495340PS02L00
Type of connection
8
Case design and HMI
Inom = 1A / 5A (T11T14)
4 9 9
Parallel Line Mutual Compensation CT
Nominal voltage
5
Additional options
3
Power supply and additional option
4
Additional options
0
Customer Specific Options
0
Voltage Thresholds for Binary Inputs
2
SCADA Interface
SCADA Interface continued
-947
Inter MiCOM Interface
0
Language
Page 3 of 4
156508187.xls.ms_office
7/8/2013
Master Text
P437-84995340-308-409-631 -462-947 Fast Full Scheme Distance Protection
Type of connection : Basic device 84TE, ring terminal connection; basic complement with 4 binary inputs, 8 output relays and 6 function keys Case design : Flush/Rack mounted, local control panel with text display Nominal current (T11T14) : Inom = 1A / 5A (T11T14) Parallel Line Mutual Compensation CT : Inom = 1A / 5A (T24) Nominal voltage : Vnom = 50130V (5 pole) Additional options : With 3 binary modules (add. 18 binary inputs and 24 output relays) Power supply and additional option : VA,nom = 48 ... 250Vdc/100 ... 230Vac Additional options : None Customer Specific Options : Standard Version Voltage thresholds for binary inputs : >155V (60 to 70% of Vnom = 220 to 250V) SCADA Interface : Protocol IEC61850 For connection to 100Mbit/s Ethernet, glass fibre ST and wire RJ45 and 2nd interface (RS485, IEC 60870-5-103) InterMiCOM Interface : None Language : English (German)
Page 4 of 4
156508187.xls.ms_office
7/8/2013
