XGPON Optical Access Transmission

FTTH Conference 2010 ITU-T Standardization: from G-PON to 10G XG-PON
Optical Access Transmission: XG-PON system aspects

Fabrice BOURGART, France Telecom Orange Labs.
Lisbon, 25 February 2010
Presentation Outline
PON Access Overview Migration from G-PON to XG-PON Architecture aspects for XG-PON Physical Layer specifications Trends.
PON Access Overview

Optical access deployments happening worldwide, with regional customized flavors built on generic transmission Most cost effective transmission solutions found to be PON
Since sharing the opto-electronics in the central office Sharing part of the fibre infrastructure through passive splitters Thus featuring an energy efficient solution
G-PON is a well established technology

Featuring 2.5 Gbit/s downstream 1.2 Gbit/s upstream
Defined by the G.984 series ITU-T Recs. G-PON has demonstrated advanced interoperability Mainstream deployments undergoing are based on classB+ (13-28dB optical budget) passive optical plant
PON Access Overview

G-PON features:
64 way passive split 20km reach various architectures options
G-PON extensions enable:

up to 60km reach class C+ optics feature up to 32dB Reach extenders enable full capability in distance and split
Lisbon, 25 February 2010 4
PON Access Overview Operators and vendors need to ever improve their return on investments:
Further features added to G-PON Improve G-PON applicability Assure future proof of plant investments
But anticipating increasing demand for bandwidth

Higher line rates necessary => XG-PON Under affordable migration conditions Include G-PON optional extensions
Protection of G-PON & Overlay

G-PON anticipated migration through ONU embedded filter and US window narrowing
ONU XG-ONU XG-ONU
XG-PON OLT WDM1r E.g. G-PON with 32-way split gives each customer sustained bandwidth ~80/40 Mbit/s XG-PON1 with same split gives each customer sustained bandwidth ~320/80 Mbit/s ONU Key GPON OLT GPON OLT 1550 RF Video
XG-ONU ONU ONU
XG-ONU
ONU
1490/1310 nm GPON
Refer to G.984.5
XG-ONU
XG-PON OLT
1577/1270nm XGPON
XG-PON General features - G.987.1

XG-PON conceived to inherit from G-PON:
TC layer principles Dynamic bandwidth allocation QoS and traffic management Remote operation of ONU through OMCI (G.988)
Integrate and improve G-PON options:

Enhanced security mechanisms Enhanced power saving options Synchronizing options enabling mobile backhauling applications Enhanced ODN and performance monitoring
Architectures with XG-PON G.987.1

XG-PON
FTTCell CBU
FTTB
MTU
Business Residential
FTTO
SBU
XG-PON OLT
FTTH SFU
Aggregation Switch
FTTB MDU
FTTCurb/Cab
ONU
XG-PON OLT
Transmission capabilities of XG-PON

Item
Upstream speed
Requirement
2.5 Gbit/s XG-PON1
Remark
10 Gbit/s aka XGPON2 is for future study.
Downstream speed 10 Gbit/s Multiplexing method Loss budget Split ratio Fiber distance Coexistence TDMA (up) / TDM (down) 29 dB to 31 dB (Nominal class) 1:64 (1:256 in the logical layer) 20 km (60 km in the logical layer) With G-PON (1310/1490 nm) With RF-video (1550 nm)
Extended class 33dB under study
Reach extender under study
Physical layer of XG-PON G.987.2

Item Upstream Downstream
Loss-budget Nominal-1 class: 29 dB, Nominal-2 class: 31 dB Extended class of 33dB is under study. Signal wavelength 1260 1280 nm 1575 1580 nm [1] Same as IEEE 10G-EPON / Enables co-existence with G-PON 2.488320 Gbit/s A weak FEC code RS(248, 232) 9.953280 Gbit/s A strong FEC code RS(248, 216)
Linerate Linecode Forward error correction (FEC)
Scrambled non-return-to-zero (NRZ)
FEC support is mandatory for both upstream and downstream
[1] In the case of outdoor OLT deployment, it is allowed for the operating wavelength to span between 1575 1581 nm.
10
Physical layer implementations: nominal 1 class G.987.2

ONU
#1 Logic WDM filter Tx Rx 10 Gbit/s ODN OLT Optical splitter 2.5 Gbit/s
OLT
WDM filter Rx Tx Logic
Class Direc ONU tion
Nomi 2.5G Min Tx power: 2 dBm Max loss: 29 dB Path penalty: 0.5 nal 1 US
Directly Modulated Lasers (DML) dB
Min Rx power: -27.5 dBm APD receivers
10G DS
Min Rx power: -28.0 dBm APD receivers
Max loss: 29 dB Min Tx power: 2.0 dBm Path penalty: 1 dB Externally Modulated Lasers (EML)
11
Physical layer implementations: nominal 2 class G.987.2

ONU
#1 Logic WDM filter Tx Rx 10 Gbit/s ODN Optical splitter 2.5 Gbit/s
OLT
WDM filter Rx Tx Logic
Class Direct ONU ion Nomi 2.5G nal 2 US 10G DS op.1 10G DS op.2
Min Tx power: 2 dBm
OLT
DML
Min Rx power: -28.0 dBm
Max loss: 31 dB Min Rx power: -29.5 Path penalty: 0.5 dB dBm Max loss: 31 dB Path penalty: 1 dB Max loss: 31 dB Path penalty: 1 dB
APD receivers
Min Rx power: -21.5 dBm
Min Tx power: 4.0 dBm EML Min Tx power:10.5 dBm

12
Pin-PD receivers
EML + Optical amp.
XG-PON work under way XG-PON recs targeted for June 2010:
G.987.3 TC layer and framing simplification
withdrawal of unused options (observed in G-PON) Optimizing framing for lower power consumption
G.988 management applicable for GPON, XG-PON, 1Gbit/s point to point and possibly GE-PON and 10GE-PON Upgrade of RE G.984.6 rec. for application to XG-PON
Energy efficiency on XG-PON

Two main targets of PON power saving: Continuation of lifeline voice service(s) with backup battery for a longer time, e.g. ranging from 4 to 8 hours in case of mains outage. Power saving in nominal PON operation (adapted from G.sup45). Four possible solutions to be further studied: Power shedding at UNI
Make unused user-network interfaces (UNIs) sleep.
Dozing
Make the ONU transmitter sleep when no upstream traffic observed.
Deep sleep
Make the ONU transmitter & receiver sleep when no traffic observed.
Fast sleep/Cyclic sleep

Periodic wake up of ONU transmitter/receiver/logics when no traffic observed. Service compatible parameters are now under discussion.
Reach Extending options for XG-PON

RE to enable budget for full optical capability 60km and split RE to enable optimized OLT location in lower density areas RE to inherit from G.984.6 enable fibre saving in OTL section through TDM or WDM multiplexing (under study)
ONU WDM1r
UNI
XG- ONU
R/S R/S
ODN
OLT
S/R S'/R'
Mid -Span Extender
SNI OTL R'/S' S/R

XG- OLT
UNI
SNI
Example 1: Overlay with mid span XG-PON only extender

ONU
UNI
XGUNI ONU
WDM1r
R/S R/S
ODN S'/R'
Mid -Span Extender
OTL R'/S' S/R
OLT
SNI
XG- OLT
Example 2: Overlay with combined G/XG-PON extender

S/R
SNI
15
XG-PON G.987.1 further options

Beyond June consent, G.987.1 listed additional topics that are for further study:
Evolution to more symmetrical XG-PON option XG-PON2 WDM stacking of G.987.3 XG-PON1 systems Enhanced optical path protection including RE based architectures
16
Summary
XG-PON G.987 series under way:

Provide good confidence that ClassB+ plants will be upgradable from G-PON to XG-PON when required by operators G.987 with G.984.5 overlay provide a smooth migration path XG-PON1 based systems will benefit from extensions consolidating the capability towards full fibre access
17
Acknowledgement
Many thanks to those who made such progress possible:

All Q2/15 contributors with special dedication to the Rapporteur and Editors. The FSAN community for their ever helpful contributions in ITU-T.
18
Thank you for your attention. Any questions ?
19

XGPON Optical Access Transmission

Uploaded by

Copyright:

Available Formats

XGPON Optical Access Transmission

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

XGPON Optical Access Transmission

Uploaded by

Copyright:

Available Formats

FTTH Conference 2010 ITU-T Standardization: from G-PON to 10G XG-PON

Optical Access Transmission: XG-PON system aspects

Lisbon, 25 February 2010

Lisbon, 25 February 2010

PON Access Overview

G-PON is a well established technology

Lisbon, 25 February 2010

PON Access Overview

G-PON extensions enable:

But anticipating increasing demand for bandwidth

Protection of G-PON & Overlay

XG-ONU ONU ONU

Lisbon, 25 February 2010

XG-PON General features - G.987.1

Integrate and improve G-PON options:

Architectures with XG-PON G.987.1

Lisbon, 25 February 2010

Transmission capabilities of XG-PON

Extended class 33dB under study

Reach extender under study

Physical layer of XG-PON G.987.2

Linerate Linecode Forward error correction (FEC)

Scrambled non-return-to-zero (NRZ)

FEC support is mandatory for both upstream and downstream

Physical layer implementations: nominal 1 class G.987.2

Class Direc ONU tion

Min Rx power: -27.5 dBm APD receivers

Min Rx power: -28.0 dBm APD receivers

Lisbon, 25 February 2010

Physical layer implementations: nominal 2 class G.987.2

Min Tx power: 4.0 dBm EML Min Tx power:10.5 dBm

EML + Optical amp.

Lisbon, 25 February 2010

Energy efficiency on XG-PON

Fast sleep/Cyclic sleep

Reach Extending options for XG-PON

SNI OTL R'/S' S/R

Example 1: Overlay with mid span XG-PON only extender

Mid -Span Extender

OTL R'/S' S/R

Example 2: Overlay with combined G/XG-PON extender

XG-PON G.987.1 further options

Lisbon, 25 February 2010

XG-PON G.987 series under way:

Lisbon, 25 February 2010

Many thanks to those who made such progress possible:

Lisbon, 25 February 2010

Thank you for your attention. Any questions ?

Lisbon, 25 February 2010

You might also like