Schneider Nrjed111045en (Print)
Schneider Nrjed111045en (Print)
Schneider Nrjed111045en (Print)
MV/LV IEC/AS
MV/LV IEC/HN
Unisarc
Fluokit
HVL
HVL/cc
Ringmaster FBX
RM6
CAS36
DV-CAS
Flusarc
Trihal
Minera
Minera HE
Minera PV
Minera ATEX
Vegeta
Siltrim
IEC
IEC
IEC
ANSI
ANSI
IEC
IEC
IEC
IEC
IEC / ANSI
IEC / ANSI
RATED VOLTAGE
3150 kVA Transformer Max power 630 KVA Material of the enclosure Metal GRC (Glass ReinforcedCement) Concrete 2000 kVA 1250 kVA 250 kVA 1 x 1000 kVA or 2 x 630 Kva
630 A
630 A
1250 A
630 A
630/ 1250A
1200 A
1200 A
630 A
630 A
630 A
630 A
630 A
630 A
630 A
5 MVA
5 MVA
5 MVA
1.5 MVA
5 MVA
5 MVA
3,3 MVA
Design Use
The MV and LV equipment are delivered directly mounted ensuring a safety, and fast solution.They can be installed in existing building, in a substation or outdoor.
Outdoor operations type of substation allows reduce footprint and speed of installation. Internal equipment arrangement can be fitted to any type of access.
Indoor operations type of substation provides to operators a protection against bad weather and better working conditions.
These substations offer modularity of their dimensions to respond to all equipment requirements.
Reconfiguring the MV network and protecting the MV/LV transformer with our MV switchgear ranges. Supplying LV energy with Minera and Trihal ranges. Distributing and protecting the LV network with Opus and Prisma Plus ranges. Managing functions remotely with Easergy Flair 200C, Easergy T200 and Easergy W200.
Distribution Industry Buidings Distribution Industry Buidings Distribution Primary distribution, Large industries, Oil & Gas, Mine & Metal, Solar & Wind
Vacuum CB
SF6/vacuum CB
SF6 CB
SF6 LBS
Vacuum CB
Vacuum CB
Solid insulation
Application
Hire fire point insulating liquid Compact design Synthetic or natural ester
Compact and Fire Resistant Oil-Immersed Transformer
Vegetal oil
Ecological Oil-Immersed Transformer
Use of equipment conform to IEC standards Degree of protection Electromagnetic compatibility Functional tests Temperature class Non-flammable materials Mechanical resistance of the enclosure Sound level Insulation level Internal arcing withstand Earthing circuit test Oil retention
Complete system of Complete system of Complete system of modular cubicles modular cubicles modular cubicles
Compact and modular Wind dedicated modular switch- switchgear combining all MV functionnal units gear combining all MV functional units used in wind farms Indoor Indoor
Indoor
Indoor
Indoor
Indoor
Indoor
Indoor
Indoor
Schneider Electric Industries SAS 89, boulevard Franklin Roosevelt F-92505 Rueil-Malmaison cedex Tel : +33 (0) 1 41 29 85 00 www.schneider-electric.com NRJED111045EN
As standards, specications and designs change from time to time, please ask for conrmation of the information given in this publication.
This document has been printed on ecological paper
IAC
IAC
IAC
IAC
IAC
IAC
IAC
IAC
IAC
IAC
IAC
IAC
Publishing: Schneider Electric Industries SAS Design: Schneider Electric Industries SAS Printing Altavia 06-2011
16/06/11 11:17
Easergy L500
Easergy Flair
DAX
Easergy T200P
ADVC
Easergy Flite
LBSkit
ISR
ISARC
L-TRI 5
TRI
VEIVacuum L
Fluvac
SF1, SFset
Fusarc CF
CT, VT
LPCT
CT, VT
Propivar
PM6 52
Flusarc-PLA
RL series N series
U series
W series
SBC
TRLF
Installation Wall-mounted Fault indicator: Network and substation views phase and earth fault
Alarm logs, archives
Detection
Phase and earth fault
Detection
phase and earth fault
Detection
phase and earth fault
Detection
phase and earth fault
Setting
on site by dip switch
Setting
on site by HMI through push buttons
Setting
on site by dip switch or with keyboard
Switch or sectionaliser Control monitoring and control Controls recloser unit Protection Fault indicator: phase
and earth fault
Detection
Phase-to-phase and phase-to-earth fault
Detection
phase and earth fault
IEC
IEC
IEC
IEC/EN
IEC/EN
IEC/ANSI
DIN/IEC
IEC/UTE
IEC/DIN/UTE
AFNOR
IEC
IEC
IEC
ANSI
ANSI
ANSI
ANSI
IEC
IEC
Data conguration
Professional communications and database editor Data creation via dialogue boxes
Capacity
1-16 switches
Installation
wall mounted 3 phases or / and earth CT
Installation
wall mounted 3 phases or / and earth CT
Installation
Measurement
Setting
on site by dip switch
Battery autonomy
16 h
Current, voltage, real power, Installation DIN format reactive power, power Detection integrated into switch- factor, demand, cos Phase and earth faults, directional clip on or G200 pole mounted gear
Installation
clip on or pole mounted
38
38
Measurement
U,I, P, Q, S, cos 6 D.I., 3 D.O.
Capacity
2 switches
Measurement
Current, voltage, real power, power factor, demand, harmonics, supply outages, waveform capture
Motorisation
24 - 48 Vdc
Earthing system
direct, impedant, compensated, isolated direct, impedant
Battery autonomy
16h
Protocols
Modbus, Modbus IP, IEC 101/104
Protocols
Modbus/IP, IEC 870-5-101/104, DNP3, DNP3/IP
Protocols
IEC 870-5-101, DNP3, Modbus
Setting
By laptop, operator control panel, IEC 870-5-101, Serial DNP3 and TCP/IP, Scada Modbus
Communication
Permanent and non permanent: telephone/GSM, radio, direct public and dedicated private line Periodic call management
Communication
Radio, PSTN, GSM, GPRS
Communication
1 Communcation port , Transmission interfaces: PSTN, Radio,GSM,GPRS, Ethernet, RS232, RS485...
Installation Protocols
Modbus, Modbus/IP, IEC 870-5-101/104, DNP3, DNP3/IP Mounted on the pole or substation frame
630/1250 A
630 A
400 A 630 A
1600 A max
630 A
1250 A
250A
125 A
2.5 A
250 A
5000 A
2500 A
2500 A
600 kvar
14400 kvar
630 A
630 A
630 A
630 A
800 A
630 A
400 A
630 A
1250 A
Communication
915 MHz short range radio communication 1 SCADA communication port Transmission interface: radio, GSM, GPRS
Protocols
DNP3, IEC 870-5-101/104 Modbus/IP and DNP3/IP
l1
25 kA 25 kA 25 kA 20 kA 20 kA 25 kA 25 kA 25 kA 63 kA
l1
50 kA
l1
63 kA
l1
50 kA 50 kA 40 kA 50 kA 31.5 kA 16 kA 12.5 kA/3 s 25 kA 16 kA 16 kA 12.5 kA 6 kA 20 kA 16 kA
Option
Webview, Multistation and Horn/Lamp indication options
Communication
Radio, PSTN, GSM, GPRS
Communication
Radio, modem, GSM, V23, RS232, RS485, 10BaseT Ethernet
digital
digital
digital
digital
digital
digital
digital
digital
SF6
SF6
Air
Air
Air
Vacuum
Vacuum CB/SF6
SF6
dry
dry
dry
vacuum / SF6
SF6
SF6
SF6
vacuum/ SF6
vacuum/ epoxy
vacuum/ epoxy
Air
Air
Associated with all types of MV switchgear T200E associated with Ringmaster only; limited to 4 switches.
Phase and earth fault indicator for underground network Lithium battery power
Phase and earth fault indicator for underground network Lithium battery power and/or LV power
Phase and earth fault indicator for underground network Self powered by CTs
Associated with a pole mounted switch Ensures remote control and automated management
Advanced controller associated with N, U and W Series reclosers, and RL Series sectionaliser
Communicating fault current detector for overhead lines Single-phase ammetric detector
Earth and phase-to-phase fault indicators for overhead distribution lines Lithium battery power
Ensure remote control and automated management Embedded web server Local and remote conguration
Remote setting with WSOS monitoring and control software Electronics sealed to IP65, 316 grade stainless steel enclosure
Fixed circuit breaker, integrating: Vacuum circuit breaker, Disconnector earthing switch, Reduced width insulated in SF6 (SF6 can be replaced by Nitrogen for 12 kV) and accessories
Fuse for measurement Motor transformer protection up to protection 24 kV (Tepefuse) and up to fuse range 36 kV (Fusarc CF) Back-up technology
Front or side mounted mechanism VIP integrated trip unit (without auxiliary power supply) in SFset up to 24 kV
Ring type and medium voltage Low Power Current Transformer (LPCT)
Recloser
Recloser
Fixed or automatic Remote controlled with capacitor banks for Easergy T200 P control motor, substation, unit or global distribution Indoor or outdoor installation Manual or automatic load break switch
Manualy operated Manual or automatic load break switch Sectionaliser capabilities on voltage and current Advanced protection, control and communication Manualy operated Manualy operated
Sectionaliser capabilities
16/06/11 11:17