Physics Investgatory Project

Physics INVESTAGATORY PROJECT
Submitted By : Vikash Prasad XII A

Roll No. : Year Topic School : 2012 2013 : To Determine The Combined Focal Length Of The Lens System : Kendriya Vidyalaya No.2
1
CERTIFICATE
This is hereby to certify that the project To Determine The Combined Focal Length Of The Lens System is an original and genuine investigation work carried out to investigate about the subject matter and the related data collection and investigation has been completed solely, sincerely and satisfactorily by, VIKASH PRASAD of class XII A as per the requirement for the CBSE Board Examination for the year 2012 13.
Roll No. : Date :
Concerned Teacher Signature :
Examiner Signature :
Principal Signature :
School Stamp :
ACKNOWLEDGEMENT
I wish to express my deep gratitude and sincere thanks to our chemistry teacher -------------- for her invaluable guidance, constant encouragement, constructive comments, sympathetic attitude and immense motivation, which has sustained my efforts at all stages of this project work. Her valuable advice and suggestions for the corrections, modifications and improvement did enhance the perfection in performing my job well. I would like to express my gratitude for our honorable principal ----------------------- for whole hearted co-operation and guidance. I am also thankful for her encouragement and for all the facilities that she provided for this project work. I sincerely appreciate this magnanimity by taking me into her fold for which I shall remain indebted to her. I take special pleasure in acknowledging our lab assistant -------------for his willingness in providing us with necessary lab equipments and constant support without which this effort would have been worthless.
Vikash Prasad
Table of content
Aim Introduction Requirements Procedure Observations Calculations Precautions Sources Of Errors Bibliography Conclusion
4
AIM
To determine the combined focal length of one Concave and one convex lenses separated by a finite distance
INTRODUCTION
Many Optical tasks require several lenses in order to achieve an acceptable level of performance. One such possible approach to lens combination is to consider each image formed by each lens as the object for the next lens and so on. This is a valid approach, but it is time consuming and unnecessary. In various optical instruments, two or more lenses are combined to 1. Increase the magnification of the image, 2. Make the final image erect w.r.t the object, 3. Reduce certain aberrations. It is much simpler to calculate the effective (combined) focal length and principal point locations and then use the results in any subsequent paraxial calculations. Two thin lenses of focal length f1 and f2 respectively which are in closed contact, then the effective focal length of the combination will be given by 1/F= 1/f1 + 1/f2 And the total magnification of the lens combination will be given by M = m1 * m2 If the lenses of focal length are separated by a finite distance d, the focal length F of the equivalent lens is given by 1/F= 1/f1 + 1/f2 - d/f1.f2
APPLICATIONS OF COMBINATION OF CONVEX AND CONCAVE LENS 1. CHROMATIC ABBERATION

One common lens aberration is chromatic aberration. Ordinary light is a mixture of light of many different colours, i.e. wavelengths. Because the refractive index of glass to light differs according to its colour or wavelength, the position in which the image is formed differs according to colour, creating a blurring of colours. This chromatic aberration can be cancelled out by combining convex and concave lenses of different refractive indices.
2. TELEPHOTO LENSES
Most optical devices make use of not just one lens, but of a combination of convex and concave lenses. For example, combining a single convex lens with a single concave lens enables distant objects to be seen in more detail. This is because the light condensed by the convex lens is once more refracted into parallel light by the concave lens. This arrangement made possible the Galilean telescope, named after its 17th century inventor, Galileo. Adding a second convex lens to this combination produces a simple telephoto lens, with the front convex and concave lens serving to magnify the image, while the rear convex lens condenses it. Adding a further two pairs of convex/concave lenses and a mechanism for adjusting the distance between the single convex and concave lenses enables the modification of magnification over a continuous range. This is how zoom lenses work.
REQUIREMENTS
7
An optical bench with three uprights (central upright fixed, two outer uprights with lateral movement) One convex lens One Concave lens Two lens holder Two optical needles Half metre scale
PROCEDURE
Take one concave and convex lens. Find the rough focal length of the two lenses L1(convex) and L2(concave) individually having focus length of f1 and f2 respectively. Keep the lenses in front of the window and obtain a sharp image of the object placed at infinity. Measure the distance between lenses and the image formed with the help of scale. Now find the accurate focal length of two lenses L1 and L2 by using the experimental setup individually and calculate its focal length reading. With left eye closed, see with the right open eye from the other end of the optical bench. An inverted & enlarged image of the object needle will be seen. Tip of the image must lie in the middle of the lenses. Mount the thick optical needle in the fourth upright near the other end of the optical bench. Adjust the height of the object needle so that its tip is seen in line with the tip of the image when seen with the right open eye. Move the eye towards right. The tips will get separated. The image tip and the image needle have parallax. Remove the parallax tip to tip as described. Combine the two lenses together with the help of two lens holder and find its accurate combine focal length.
OBSERVATIONS
Serial no. 1. 2. Rough Radius of focal curvature(R) length(cm) Convex(L1) 9.5 20 Concave(L2) 8 18 Lenses f=R/2 (cm) 10 -9
The separation between the two convex lenses = 7.2 cm
CALCULATIONS
1/F = 1/f1 + 1/f2 - d/f1f2 1/F = 1/10 + 1/(-9) - 7.2/(10)(-9) 1/F = -1/90 + 7.2/90 = 6.2/90 F = 90/6.2 cm Therefore, F = 14.516 cm
10
PRECAUTIONS
Tips of the object and image needles should lie at the same height as the centre of the lens. Parallax should be removed from tip to tip by keeping eye at a distance at least 30cm away from the needle. The object needle should be placed at such a distance that only real, inverted image of it is formed.
SOURCES OF ERROR
The uprights may not be the vertical. Parallax removal may not be perfect.
BIBLOGRAPHY
Comprehensive Pratical Physics Class XII NCERT Physics Part II Experimental Physics www.wikipedia.com
11
CONCLUSION
1. The combined focal length of one convex and one concave lenses having focal length 10 cm and 9 cm respectively and separated by a distance of 7.2 cm is 14.516 cm. 2. So on combination of the one convex and one concave lens the effective focal length increases and hence its effective power decreases. 3. The effective nature of the combined lens system is converging i.e. convex lens since focal length for the system comes out to be positive.
12

Physics Investgatory Project

Uploaded by

Copyright:

Available Formats

Physics Investgatory Project

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Physics Investgatory Project

Uploaded by

Copyright:

Available Formats

How did the student determine the focal lengths of the individual lenses?

What formula was used to calculate the combined focal length of the lens system?

Physics INVESTAGATORY PROJECT

Submitted By : Vikash Prasad XII A

Roll No. : Date :

Concerned Teacher Signature :

APPLICATIONS OF COMBINATION OF CONVEX AND CONCAVE LENS 1. CHROMATIC ABBERATION

The separation between the two convex lenses = 7.2 cm

You might also like