Scribd Logo
Upload

Welcome to Scribd!

  • 262 views

    Cem Flex

    Uploaded by

    Janesha
    Sika Cemflex is an acrylic polymer dispersion used to make flexible cementitious waterproofing slurry coatings. It provides good adhesion, abrasion resistance, and protects surfaces against water penetration. The product is applied as a slurry in two coats using a brush or trowel at a rate of 0.8 kg/m2 per coat.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Cem Flex

    Uploaded by

    Janesha
    262 views3 pages
    Sika Cemflex is an acrylic polymer dispersion used to make flexible cementitious waterproofing slurry coatings. It provides good adhesion, abrasion resistance, and protects surfaces against water penetration. The product is applied as a slurry in two coats using a brush or trowel at a rate of 0.8 kg/m2 per coat.

    Original Description:

    Cem Flex

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Sika Cemflex is an acrylic polymer dispersion used to make flexible cementitious waterproofing slurry coatings. It provides good adhesion, abrasion resistance, and protects surfaces against water penetration. The product is applied as a slurry in two coats using a brush or trowel at a rate of 0.8 kg/m2 per coat.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    262 views3 pages

    Cem Flex

    Uploaded by

    Janesha
    Sika Cemflex is an acrylic polymer dispersion used to make flexible cementitious waterproofing slurry coatings. It provides good adhesion, abrasion resistance, and protects surfaces against water penetration. The product is applied as a slurry in two coats using a brush or trowel at a rate of 0.8 kg/m2 per coat.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Product Data Sheet Edition 13/07/2007 Identification no: 02 03 01 01 001 0 000000 Sika Cemflex

    Sika Cemflex
    Acrylic polymer for making flexible cementitious waterproofing slurry

    Construction

    Product Description
    Uses

    Acrylic polymer dispersion for making cement based waterproofing slurry coating. Its used for external and internal waterproofing in the following structures: Water tanks Basements Flat roofs terraces and balconies Bridges Retaining Walls Sea Walls It provides the following beneficial properties: Easy to apply by brush, slurry consistency Good adhesion to sound & prepared substrates Good abrasion resistant Protects against water penetration, salt & carbonation Non-toxic when cured, suitable for contact with drinking water Non-corrosive to steel & iron Depending on type of application, 2 coats are always required. Consumption of Sika Cemflex is 0.8 kg/m2 for two coats. Normally two coats should be applied. In extreme cases three coats may be required.

    Characteristics / Advantages

    Coverage Product Data


    Form
    Appearance / Colour Packaging

    White (milky), liquid 20.0 kg container 50.0 kg container 100.0 kg container

    Storage
    Storage Conditions / Shelf Life 12 months from date of production if stored in undamaged and unopened, original sealed packaging, in dry conditions and protected from direct sunlight. Protect from frost.

    Technical Data
    Chemical Base Polymer Content Acrylic dispersion ~ 16.0 % by weight

    Sika Cemflex

    1/3

    Specific Gravity pH Chloride Viscosity in seconds( B4 0 Ford Cup. 30 C Pull out Bond Strength by OPC at 28 day (cement : polymer= 2:1 by wt.) Flextural strength(OPC) Water absorption Substrate Temperature Ambient Temperature

    ~1.03 kg/l >6.5 No added chloride 15 Control= 0.45 N/mm2 ,With Sika Cemflex = 1.10 N/mm2

    28 day = 8.50 N/mm

    Control = 24.0%, With Sika Cemflex Coated =6.0%

    +10C min. / +40C max. +10C min. / +40C max.

    System Information
    Application Details
    Substrate Quality Concrete, mortar and masonry surface must be clean, free from grease, oil and loosely adhering particles. Steel and iron surfaces must be free from scale, rust, grease and oil. All surface must be as true and flat as possible. Saturate absorbent surface thoroughly. Efficient surface preparation is essential to achieve high adhesive quality of the product.

    Substrate Preparation

    Application Instructions
    Mixing A prebatched mixture of good quality cement with clean fine sand (500 microns) should be prepared with cement and sand in equal proportions by weight. This should be mixed with Sika Cemflex in proportion of one part of Sika Cemflex to four parts of mixture to form slurry. For trowellable consistency or putty, the proportions of Sika Cemflex should be reduced accordingly. The mixing of slurry should be done in a clean container by slowly adding the powder component to Sika Cemflex and stirring with a slow speed mixer (500 - 600 rpm). Mixing should be done until the consistency is free from lumps. Dampen all surfaces immediately ahead of the slurry application. Whilst the surface is still damp from saturation, apply the first coat and leave to harden (2-6 hrs.). For slurry consistency apply with a hard plastic bristled brush or broom. For trowellable mortars use a notched trowel. After the second coat has been applied, finish by rubbing down with a soft dry sponge. For water proofing slurry should be applied at the rate of 3-4 kg/m2 for two coats. Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be removed mechanically. 20 minutes at +27C

    Application Method / Tools

    Cleaning of Tools Potlife

    Curing Details
    Curing Treatment As with all cement based products, curing is important. Protect the freshly applied product against direct sunlight and strong winds. Use damp hessian or polythene to aid curing, for 3 days. Then allow to dry out. All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control. For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety-related data.

    Value Base Health and Safety Information

    Sika Cemflex

    2/3

    Legal Notes

    The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sikas recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.

    Construction
    Sika India Pvt. Ltd. Commercial Complex II 620, Diamond Harbour Road Kolkata, 700 034, India

    Phone +91 33 2447 2448/2449 Telefax +91 33 2468 8688/2665 www. sika.in [email protected]

    Sika Cemflex

    3/3

    You might also like